Directorate Of Urban Local Bodies Tender

Sea- Saw ( 4 seater) : 8`LX5`.5 Wx 15` high. Frame is of m.s. pipe 2` x 12 gauge. Sitting planks is of m.s. pipe 2`x 12 gauge and its cantilever and handles is of m.s. pipe 3/4`` x12 guage. Sitting seats 4 nos. is of molded FRP material in 3 mm thick wirth suitable PU Primer and PU Paints.

Supply of Acrylic letter ( Front and side both acrylic) Height 1 ft width as per letter , raising 5 ich samsung module waterproof and highlight power supply material of letter ACP, Interior LED Panels

Plastic Dustbin 20 Ltr.

Casting and laying of making of foundation 1:1.5:3 for foundation of size 0.4mx0.4mx1m minimum 4nos. 12mm dia longitudinal MS reinforcement rods with rings of 4 nos. 8mm dia for fixing the pole with all labor and material required to complete the job in all respect up to the entire satisfaction of Engineering in charge of the work.

Supply and erection of under ground armored cable loose in existing pipe or trenches completed with necessary`s connection. Make RR/Havells/ Polycab, Grandley. 16 sq. mm 2 core cable.

Supply and erection off decorative pole of GI Pipe section off 3 mtr long with lower section 1 mtr long 114mm outer dia, upper section 2 mtr long- 60mm outer dia. The pole shall be procvided with 340mm dia and 45mm height o base arrangement at bottom. The pole shall have service window of size 130mm (W) x 300 mm (H) comprising 4 way connectors of 60Amp and 1 MCB of 6AMP including internal wiring in pole with 12.5 mm 2 core PVC insluated copper wire. Diecasted decorative casting is provided at the joint of pole. Pole is painted with multiple coats of weather resistant polyurethane paint having minimum coating thickness 85 microns with approved color with all labour and material required including suitable foundation bolts with all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer In charge of the work. As per PWD Make.

Supply and erection of time contractor DP MCB mounted on bakelite sheet and installed in water proof CRCA sheet 18 SWG duly painted with poeder coated paint box off size 12`x15``x5`` duly lockable including input and out put connector bakelite / prclein of 63A rating and necessary service cable up to 10 mttr complete with internal copper wiring and intalling the same on ple pedestal with suitalble means at height desired by enginner in charge to aviod theft upto entire satisfication of enginner incharge with following specification. Time Quartz analog 24 hour operation (G.E./LandR/Siemens/Indoasian/CandS) DPMCB :- 40a 2 Pole. (G.E./ LandT/ Siemens / Schnider/CandS) x15`

Providing trench less cutting by Hydraulic drilling device boring / Manual OR through some suitable alternate method with insertion of HDPE Pipe including supply. delivery of HDPE pipe at work site and lying of 50mm internal dimeter DHPE pipe inside road for road for road crossing of cable by Hydraulic drilling device without opening of the road top surface, laid at a depth o at least 900mm below the road surface top the feeding point to the feeder pillar box in median (OR) from feeder pillar to respective street light pole inducing cost of all accessories for road crossing for laying of cables.

Supply and erection o 40 watt LED decorative Post Top Fixture (IP65) made with corrosion resistant die cast aluminum height of light fixture is 425 mm with hat of dia 550 mm with die cast base of dia 60mm rubber gaskets are provided at appropriate location for water resistant (IP65) 4 no. of pipe support to opal diffuser and canopy opal diffuser is made of unbreakable PC material. Led to be mounted on vertical squre aluminum exclusion top to bottom height on diffuser. Light fixture is painted with multiple coats of weather resistant polyurethane paint min. 85 microns including the entire satisfaction of enginner in charge of the work. As per PWD Make