Directorate Of Urban Local Bodies Tender

Supply and erection of PVC sheathed aluminium flexible cable in existing pipe/trench etc. of size 1.5 sq mm 2 core for working voltage up to 1100 volts conforming to IS1554 (Part-1) 1988/7098 (Part-1) with aluminium conductor ISI marked complete in all respect as per standard specification up to the entire satisfaction of Engineer-in-charge (Make: - Grandlay| Havells| KEI or its equivalent)

Supply, erection, testing and commissioning of 3 phase Automatic timer AMSons/LandT/Indoasian/CandD make to ON/OFF the street light on different fixed timing maintainable on street light pedestal, pillar, wall M.S. pedestal where ON/OFF point is available, cabinet is fabricated from 22 gauge, painting, wiring, connection ON/OFF from bottom of the cabinet, 3 contractors 25 Amp, 24 volts D.C. each 2 transformers, rectifier system, switching system, Bakelite contractor, 32 Amp, MCB, 32 amp Havells digital timer Auto/Manual system, time setter, fiber sheet, rubber, and plastic component, wiring and component fitting, chemical (Epoxy) the job includes allied material, labour, erection, testing and commission at site including cost of material complete in all respect up to the entire satisfaction of Engineer-in-Charge.

Supply and Erection of 9mtr high FLAG Colour light emitting decorative M.S Pole. The pole 9mtr. height above the ground level having top 60.0mm O.D. of 4 mtr. and bottom 140.0mm O.D. of 5mtr. with avg. thickness of 3.2mm. The pole middle part illuminated in green colour 1mtr, white 1mtr and saffron 1mtr. with polycarbonate structure of 150mm O.D. with avg. thickness of 2mm as per drawing. Illuminated diffuser is made of UV stabilized PC back lit by 100W led mounted PCB with 12V constant voltage driver. The pole shall also be provided with flush door at the bottom with proper strengthening to the cutout of the door opening. A junction/looping box with 32 amps heavy duty connector shall be built into the pole. Pole with flag colour and 1mtr. single side bracket arrangement for the top mounting fixture as per drawing. The pole shall be made of mild steel with precision machining and filling job to achieve good finish and a fine coat of primer on each element before assembling. After assemble of each one coat of primer and two coats of P.U. paint is applied. Approve colour UV resist coating of mat/glossy/metallic finish followed after air drying of pole. The pole must be of IP 66 rating. The pole shall have a waterproof flush door and locking arrangement. The base plate 320x320x12mm of the pole is design with elongated foundation holes for fine alignment of the pole during installation. LED a CRI) 70 the luminaire shall have a life class of 50,000 hours and driver efficiency of )80%, THD 0.9, internal surge protection of 4kV with 10kV additional SPD. LED should be of 50,000 hours complete in all aspects with all accessories without foundation bolts. (Make: -Surya/Crompton/Bajaj/Glowmac/Vipin ST Poles/Vek)