Directorate Of Urban Local Bodies Tender

Supply and Erection of Decorative Pole of GI Pipe Section of 3Mtr long with lower section 1Mtr Long -114mm Outer Dia, Upper section 2Mtr long -60mm outer dia. The pole shall be provided with 340mm dia and 45mm height of base arrangement at bottom. The pole shall have service window of size 130mm (W) x 300mm (H) comprising 4 way connectors of 60Amp and 1 MCB of 6Amp including internal wiring in pole with 1.5 mm 2 core PVC insluated copper wire. Diecasted Aluminum casting is provided at the joint of Pole. Pole is painted with multiple coats of weather resistant Polyurethane paint having minimum coating thickness 85microns with approved color with all labour & material required including suitable foundation bolts with all labour & material required to complete the job in all respect upto the entire satisfaction of Engineer - In - Charge of the work. GL-PL- Flox -MS -03M -60 . Make Glowmac or equivalent, Crompton, Philips,

Supply and Erection of Timer Contractor, DP, MCB mounted on Bakelite sheet and Installed in water proof CRCA Sheet 18 SWG duly painted with powder coated paint Box of Size 12''x15''x5'' duly lockable including Input and Out Put Connectors Bakelite/Porclein make- Siemens, Sintex of 63A Rating and neccessary service cable up to 10 mtr, complete with internal copper wiring and installing the same on pole/pedestal with suitable means at height desired by Engineer in charge to aviod theft upto entire satisfication of engineer incharge with following specification. Timer :-Quartz Analog/Digital 24 Hour Operation (L&T/Siemens/Schnider) Contractor :- 3Pole 40A, 415Volt. (L&T/Siemens/Schnider) DPMCB :- 40A 2pole. (L&T/Siemens/Schnider)

Supply and erection of 40Watt LED Decorative Post Top Fixture(IP65) made with corrosion resistant Die Cast Aluminium, height of Light Fixture is 425mm with hat of Dia 550mm with die cast base of dia 60mm, rubber gaskets are provided at appropriate location for water resistant(IP65). 4 no of pipe support to diffuser and canopy Diffuser is made of unbreakable PC material. Led to be mounted on vertical square aluminium exclusion top to bottom height on diffuser. Light fixture is painted with multiple coats of weather resistant Polyurethane paint min. 85 microns including the cost of labour and material required to complete the job in all respect upto the entire satisfaction of Engineer - In - Charge of the work. Make Glowmac GL-PT ASTOR or equivalent, Crompton, Philips.

Casting and Laying of making of foundation 1:1.5:3 for foundation of size 0.4 m x 0.4 m x 1 m minimum 4 nos. 12 mm dia longitudinal MS reinforcement rods with rings of 4 nos 8 mm dia for fixing the pole with all labour & material required to complete the job in all respect upto the entire satisfaction of Engineer - In - Charge of the work

Providing trench less cuttting by Hydraulic Drilling Device boring/ Manual OR through some suitable alternate method with insertion of HDPE Pipe inlucidng supply, Delivery of HDPE pipe at work site and laying of 50mm internal diameter HDPE pipe inside road for road cross of cable by Hydraulic Drilling Device without opening of the road top surface, laid at a depth of at least 900mm below the road surface from the feeding point to the feeder pillar box in median (OR) from feeder pillar to respective street light pole including cost of all accessories for road crossing for laying of cables.

Supply and erection of 6/8/10 watt LED Decorative Bollard of GI Pipe Section of 1 mtr and casting in aluminum. Base made of die cast Aluminum with holes suitable for 10mm foundation bolts, rubber gaskets are provided at appropriate location for water resistant(IP65).Diffuser is made of Conical unbreakable PC material. Bollard is painted with multiple coats of weather resistant Polyurethane paint having minimum coating thickness 85microns with approved color of with suitable foundation 1:1.5:3 for foundation of size 0.25 m x 0.25 m x 0.6 m for fixing the LED Decorative Bollard including the cost of labour and material required to complete the job in all respect upto the entire satisfaction of Engineer - In - Charge of the work. Make Glowmac, Philips, Kaylite.

Casting, Laying and covering of Gap Base plate (Pole) between foundation suitable c.c. mixture and pole marking with yellow reflector stricker with all labour & material required to complete the job in all respect upto the entire satisfaction of Engineer - In - Charge of the work

Supply and erection of Low Impedance (Bollard type) 40watt garden speaker in suitable fixture and making of foundation 1:1.5:3 for foundation of size 0.4 m x 0.4 m x 1 m minimum 4 nos. 12 mm dia longitudinal MS reinforcement rods with rings of 4 nos 8 mm dia with all labour & material required to complete the job in all respect upto the entire satisfaction of Engineer - In - Charge of the work. Make - Ahuja Gs-6301T or equivalent Syco, JBL, Pioneer

Supply and erection of PA Amplifier designed to five high power clean sound with Aux input, suitable for CD/DVD/USB/Pen drive with all labour & material required to complete the job in all respect upto the entire satisfaction of Engineer - In - Charge of the work (Suitable for 30 speaker of 40 watt) . Make - Ahuja, Syco, JBL, Pioneer

Supply & erection of Speaker Cable PVC Copper 1 Sq.mm x 3 core insulated and sheathed circular flexible wire (make:Havells, RR, Polycab) with all labour & material required to complete the job in all respect upto the entire satisfaction of Engineer - In - Charge of the work