Directorate Of Urban Local Bodies Tender

RA-2 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) and 900 N (Edge), minimum compressive strength 50 N/ mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screwsshall be paid separately) Wpc Sheet Hyb frosty white Prelam make Alstone

RA-4 Wall Paneling Specification-Providing and fixing Wall Paneling with Perforated Acoustical High Density Fiber Board FR Grade Termite Resistance Water ater Resistance Panels 16 mm with 6 mm dia lineal perforations The panels shall be one side Pre-laminated board (decorative lamination on one side other sides balancing lamination) grade 1 Toungue and Groove edges for seamless mounting having density of 750-800kg/m3 The back of the panels are perforated with 10mm diameter circular holes with a nonwoven fabric covering of 0.2mm for providing sound atisorption Panel is to be fixed on 12 mm ply with headless nail Ply to be fixed with scr crew fixed on stud of Knurling G1 section of prime quality cold rolled steel as per iS 513 hot dipped galvanized 120 gsm as per 85 2989 and zinc coabing as per IS 277 of Knurling Gl-48 mm (48X34X36X0 5X3050/3660) wall channel and Knurling Gl 50 mm (50X32X32X0 5X3660) floor and celling channel are to be fixed with nylon plastic sleeves and wooden screws to from the proper framework The extra channel must be used at openings and junctioms as required. The cavity of framework should be inserted with Polyester Wadding backing/infill 50 mm with density of 1000 gam having flamimibality IS 15061-2002 Annexure clause A 32 for better insulation The stud will come at every 600 centre to centre. The installed system will have NRC not less than 0 80 as por IS 8225/150 354/ASTM 423 as per manufacturer`s specificacion as per direction of Engineer-in-Charge( Make: Earcons Acoustic, Armstrong, Anutone)

PROVIDING AND FIXING SS 316 SS Top Mounting Glass Balustrade Dia.50mm and 1.5mm Thick Hollow Vertical Main Post Dia.87mm and 8mm Thick Base Plate Sleeve 10X120mm Fastener (2 NOS) Railing Height 1050mm from FFL Dia.50mm and 1.5mm Thick Handrail with Accessories SS 316 Matte Finish with 12mm Toughened Glass with Hole (Glass Height Up To 42 Inch Approx. from FFL).Make – Technoraill

Providing and Installation of Baffle ceiling system (pr ceilling) comprises of 50 mm x 100 mm (50 mm width and 100 mm Height) U Shape panels in RAL color finish. Panels shall be made of 0.5 mm thick galvanized steel after Powder-coated and length up to 3000 mm. Panel shall be high corrosion resistance and good color stability. Centre to Centre panel gap will be 150 mm. Panels are fixed on to roll formed carriers 20 mm wide x 40 mm deep out of 0.80 mm G.I sheet Powder-coated color with cutouts to hold the panels in module of 50 mm at maximum 1200 m c/c. Carriers are suspended from the roof or truss by 6 mm dia. galvanized steel wire rod hanger with special height adjustment suspension clip at max. 1200 mm c/c. Hangers are fixed to the roof by ‘J’ hooks or ceiling brackets and nylon inserts. Panels are factory cut in lengths up to maximum 4.0 m to suit site dimensions or shop drawings. Top cap and side cap are used to cover the edges of the panels. PR celling, Bullard,NSA)

Providing and applying PU based high performance waterproofing treatment over terrace having pure polyurethane based, single component, low VOC, elastomeric, seamless, moisture curing, waterproof membrane, Dr. Fixit FlexiPU 270(I), applied in 2 coats over After carrying the necessary preparation with roller at a total consumption of 1.5 Kgs/Sqmt, having specific gravity of minimum 1.30, having an elongation capacity of over 400%, with tensile strength of ) 2.00Mpa, Adhesion to concrete surface over 2.00N/mm2, Shore A Hardness of 75, Fire resistance EURO Class-F, with Anti-root propertise, with a service temperature range of -40deg C to 80deg C, with solids content of around 90%, to be applied by brush/roller over the RCC slab and on the vertical surfaces upto 300mm above FFL, thereafter ponding with water for 3 days etc. complete.The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guaranteed for 10 years against any leakage and by authorised by company with due tto certified .make pd lite dr fix it

Providing and fixing water profing treatment in Bath room/ toilet Core cut and Drain Down Pipe Treatment : Core cuts to be grouted with Bathseal Grout and pipe is aplied with Bathseal Tape.Surface Preparation: Cleaning the surfaces with Wire brushing and washing the treatment receiving surface area with water, so as to make the surface totally dust free to receive the treatment. Crack Filling : Cracks shall be treated by chasing open using electrical cutter machine to form a “V” space groove of approx. 4 to 6 mm wide and 10 to 15 mm deep. The groove shall be cleaned with compressed air and thereafter sealed with polymer modified mortar of ratio, cement-sand mortar in 1:3 proportion admixed with Dr.Fixit Pidicrete URP (20% to the weight of cement )Angle Fillet : All around wall and floor junction, prepare ``V` groove over this, an angular fillet of 75 mm X 75 mm shall be made in cement-sand mortar in 1:3 proportion admixed with Dr.Fixit Pidicrete URP (20% to the weight of cement ) Pipe Groove treatment : Before application of coating , All the pipe filling grooves created must be cleaned and coated with Dr. Fixit Pidifin 2K, Applying coating in two coats @ 1.0 kg/M2/coat.in time interval of 6-8 hrs And after Pipes are fitted, Filled the groove with Dr. Fixit Pidicrete URP mortar. Cure it for 24 hrs. Coating Application : Providing and applying High Performance Two Component Acrylic Polymer Modified Cementitious flexible flexible waterproofing, Dr. Fixit

Providing and fixing Braided hose with Two 15mm Nuts and Rubber washers without Nipple 6021Waste Coupling 32mm Full Thread : Model No. BDC001 of Aquaviva make 45 cm length

Supply and errecting an advanced RO water purifier with KENT`s patented Mineral RO TM Technology and an inbuilt TDS controller.Suitable for purification of brackish/tap water /municipal corporation water supply.KENT`s patented Mineral RO TM Technology retains essential natural minerals in purified water using the TDS Controller, thereby providing 100% safe and tasty drinking water.An additional storage tank of 8-20 litres capacity can be attached to KENT Elite II which ensures a steady supply of purified water even in the absence of electricity or running tap water.KENT Elite II employs four RO membranes and 2 high-pressure pumps for purification that facilitates a flow rate of up to 80 litres/ hour. Its slim and compact design ensures easy attachment with water coolers, making it the most sought after water purifier by commercial entities.The double purification of RO plus UF removes even dissolved impurities such as chemicals, bacteria, viruses and salts, making the water 100% pure.Suitable for Purification of Brackish/Tap Water, Municipal Corporation Water with Body Material Stainless Steel.The Purification Production Rate 80 L/hr withMax Duty Cycle 400 L/day. Filter Cartridge Sediment, Activated Carbon, UF with Min. / Max. Working Pressure 20/150psi model no Kent Water Purifier Elite II Plus 100 LPH HSN Code: 8418 Product Code: knt9084800

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) and 900 N (Edge), minimum compressive strength 50 N/ mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screwsshall be paid separately) Wpc Sheet Hyb frosty white Prelam make Alstone 30 mm thick

Providing and fixing stonest india marble carving company white Marble Garden water fountain designe traditional based white color with pond fountain size 8 feet height and pond size 8 feet x 8 feet and including 1/2 HP power submersible motor pump and wiring.

Supplying and Installation of centrifugal self priming Submersible pump with high hydraulic efficiency, chemical resistant and ultra quiet operation. Each pump integrated along with IP-55 protection- class F continuous rating. Pump shall be of one piece body of durable composite material, with SS Shaft and mechanical seal. Also have large capacity strainer with fast opening translucent lid,SucXDel-80mmX80mm. Impeller : Bronze Horse power : 3 HP Phase : 3 phase 380-240V Flow rate = 32.4m³/hr @ 14m water head. Make:Kirloskar/Crompton

Supplying and Installation 40mm dia. Inlet Anti-Turbolent Nozzle in SS 304 , Make-himalaya

Providing and fixing sumbersimble insulated cable with earthing wire complete including necessary cable tray excavation and refilling wherever required.Make-Finolex/Polycab with conduit. 2 core 2.5 sqmm (from panel to Lights)

Providing and fixing sumbersimble insulated cable with earthing wire complete including necessary cable tray excavation and refilling wherever required.Make-Finolex/Polycab with conduit. 3 core 4 sqmm (from panel to recirculation pumps)

Providing and fixing and laying of Upvc 10Kg/cm2 pipes with screwed/ welded fitting i.e Tee. Elbows. Bush, MTA, FTA etc with Clamps, hangers anchor fashner, structure steel supplort as required with flow indicators, Puddle flange. Make-Supreme 25mm dia

Providing and fixing and laying of Upvc 10Kg/cm2 pipes with screwed/ welded fitting i.e Tee. Elbows. Bush, MTA, FTA etc with Clamps, hangers anchor fashner, structure steel supplort as required with flow indicators, Puddle flange. Make-Supreme 32mm dia

Providing and fixing and laying of Upvc 10Kg/cm2 pipes with screwed/ welded fitting i.e Tee. Elbows. Bush, MTA, FTA etc with Clamps, hangers anchor fashner, structure steel supplort as required with flow indicators, Puddle flange. Make-Supreme 40mm dia

Providing and fixing of ball valve(srews end) with adoptor union fitting complete in all respects.Make-Zoloto 25mm dia

Providing and fixing of ball valve(srews end) with adoptor union fitting complete in all respects.Make-Zoloto 32mm dia

Providing and fixing of ball valve(srews end) with adoptor union fitting complete in all respects.Make-Zoloto 40mm dia

Providing and fixing of Gun Metal non return valves of approved quality(screwed end)Make-Zoloto: 40 mm dia

Design, Fabrication, assembling, wring, supply, installation, testing and Commissioning of MCC Panel shall be fabricated out of 14 gauges CRCA sheet in cubicle in 3 b formation with reinforcemint of suitable size angle iron, channel `T` sectons irons One incoming MCB 40A.

Installtion of Floor Mounted Type SS304 under water LED lights: IP68. 12V,18W Lights. Make: Himalaya or equivalent.

Supply and Installation of power supply 21A/12 V output, DC Driver Type. Make: Himalaya or equivalent.

Supply and Installation of 5m3/hr FRP sand filter with top mounted multiport valve and 1 HP pump with necessary plumbing , vaccum and inlet nozzles . Make-Emaux or equivallent.

Supplying And Fixing AIR WALKER AREA : 3.60 X 1.08 X 4.59MAIN STRUCTURE : 80 NB B CLASS PIPE | RAMAINING FRAME : 32 NB B CLASS PIPE | POWDER COATING : 60-70 MICRO THICKNESS | MAKE GN Enterprises

Supplying And Fixing AIR SWING AREA : 4 X 2 2 X 4.92 MAIN STRUCTURE : 80 NB B CLASS PIPE | REMANING FRAME : 32 NB B CLASS PIPE USED |MAKE GN Enterprises

Supplying And Fixing CHEST PRESS AREA : 6 X 3.5 X 5.5 FT MAIN STRUCTURE : 80 NB B CLASS PIPE | RAMAINING FRAME : 32 NB B CLASS PIPE |MAKE GN Enterprises

Supplying And Fixing ARM WHEEL AREA : 3.28 X 1.31 X 4.26 MAIN STRUCTURE : 80 NB BCLASS PIPE | RAMAINING FRAME : 32 NB B CLASS PIPE | POWDER COATING : 60-70 MICRO THICKNESS |MAKE GN Enterprises

Supplying And Fixing CROSS WALKER AREA : 5.28 X 1.96 X 5.24 FT | MAIN STRUCTURE : 80 NB B CLASS PIPE | RAMAINING FRAME : 32 NB B CLASS PIPE | POWDER COATING : 60-70 MICRO THICKNESS |MAKE GN Enterprises

Supplying And Fixing CYCLE AERA : 10 X 8 X 6 FT | MAIN STRUCTURE : 80 NB B CLASS PIPE | RAMAINING FRAME : 32 NB B CLASS PIPE |MAKE GN Enterprises

Supplying And Fixing MERRY GO ROUND AREA : 5 FT DIA | CAPACITY : 4 -6 CHILDREN | | AGE : 3 - 13 YRS | 6212 DOUBLE NBC BEARING WITH HEAVY SHAFT | HAEVY DUTY BASE SUPPORT |MAKE GN Enterprises

Supplying And Fixing SEE-SAW 2 SEATER AREA : 6 X 3 X 2 FT | CAPACITY : 2 SEATER | LLDPE SEATS | PIPE SIZE : 114 MM OD PIPE USED ON BOTH FRAME | MAKE GN Enterprises

Supplying And Fixing DOUBLE SWING AREA : 10 X 4 X 10 FT | PIPE: 58 MM OD PIPE USED IN TOP HEAD FRAME and ARC SHAPE | CAPACITY : 2 KIDS | AGE : 3 - 13 YRS | SEAT TYPE: TWO RUBBER BELT SEAT | CHAIN: 5 FT ( 6 MM CHAIN ) WITH HOOK | | MAKE GN Enterprises

Supplying And Fixing ARCH SWING AREA : 10 X 4 X 10 FT | PIPE: 58 MM OD PIPE USED IN TOP HEAD FRAME and ARC SHAPE | CAPACITY : 2 KIDS | AGE : 3 - 13 YRS | SEAT TYPE: TWO RUBBER BELT SEAT | CHAIN: 5 FT ( 6 MM CHAIN ) WITH HOOK | | MAKE GN Enterprises

Supplying And Fixing HORSE SPRING RIDER AREA : 2.5 X 2.5 X 2.5 | | MAKE GN Enterprises

Supplying And Fixing DOLLY SLIDE AREA : 10 X 2 X 5 FT : PH : 5 FT | FRP THICKNESS ( 6-8 MM) | AGE : 3-15 YRS | PIPE : 48 MM X 34MM and 27 MM ( SUPPORT PIPE) ISI B CLASS PIPE | MAKE GN Enterprises

Supplying And Fixing JOKAR MGRAREA : 5` FT DIA | CAPACITY : 3 CHILDREN | FRP JOKER SEATS| AGE : 3 15 YRS | 6212 NBC BEARING WITH HEAVY DUTY SHAFT | MAKE GN Enterprises

Supplying And Fixing Multiplay station : AREA : 20 X 15 X 13 FT | CONSIST : 1 TOWER | 1 FRP WAVY SLIDE | 1 SPIRAL SLIDE | 1 FRP STAIR | 1 SPIDER CANOPY | ISI B CLASS PIPE 3 ` INCH | MAKE GN Enterprises

Supplying And Fixing Multiplay station AREA : 20 X 15 X 12 FT | CONSIST : 1 TOWER | 1 CANOPY | 1 SPIRAL SLIDE | 1 DOUBLE SLIDE | 1 STAIRCASE | 1 CROSS and ZERO GRILL | 1 DOUBLE SLIDE SAFETY GATE | 1 BUTTERFLY CANOPY | ISI B CLASS PIPE USED 75 MM | 2 SEATER SWING ADD ON | MAKE GN Enterprises

Providing and laying EPDM Rubber flooring 35MM 29mm thick SBR plus 6MM EPDM As per approved finish and colour in flooring as per the,manufacturer specification for play area this will be directly laid on the cement concrete base ,supply and apply Sbr Binder to be 15% of SBR weight or 20% of EPDM Make: Stark Sports

Deisgn, supply and installation of Jogging track With base layer of 10mm SBR and upper layer of 3mm EPDM/PU Spray coat Base layer is made from single compound Polyethylene binder and SBR Granules finished with multiple spray of 100% solid pigment polyethylene and terracotta EPDM Granules Make: StarkSports

providing and supplying S- Shaped Bench: manufactured with M -30 Grade of concrete. Make Kkindia

Providing and fixing Circular Bench with backrest:Overall Dimensions Base Sitting Platform Size: 1600 mm dia. Height of base and back support: 900 mm. Bottom dia. of the base: 1122 mm. Top dia. of the base: 660 mm. Thickness of bench 50 mm. Manufactured by using M-30 grade of Concrete using vibro compaction process.Reinforced suitably to promote long use and to prevent damage during handling, transportation and erection make kk india

Providing and fixing Fiberglass dustbin with concrete base:Supply of Fiber Glass Dustbin with Concrete Base Green Colour Overall dimensions 750 mm Height x 420 mm Top diameter,dustbin manufactured from FRP and the base manufactured with M-30 grade of Concrete make kk india

providing And Fixing Customize Gazebo, Material: FRP,haxagonal shape Size: 13` diameter x 11` height make glyptic art

Providing and Fixing Acrylic Led Lighte English Letter Height 3` of I Love Gharounda Letters with side steeel and front acrylic

Providing and fixing Customize Sculpture, Material: FRP, Size: 5` height yoga stachu manufacture glyptic art

Supply ,Storing Handling and Assembling 4x14W T5 Indoor recess mounted luminaire with HiTe diffuser (High Transmission Efficiency Diffuser) suitable for 4X14W T5 lamps Designed to be mounting in gypsum , POP , metric Ceiling system . Available with square P5 Louver in center surface mounted light fixture complete with lamp , ballast and all accessories as required .MAKE Legero ,Halomax,Philips

Syppply , Storing Handling and Assembling BBS180 1xDLED-4000 PSU WH-Indoor recess mounted luminaire Designed to be mounting in gypsum , POP , metric Ceiling system .fixture complete with lamp , ballast and all accessories as required .MAKE Legero ,Halomax,Philips

Syppply , Storing Handling and Assembling TCH 208 1xTL5 28W HF-Indoor Universal mounted luminaire suitable for T5 lamp.Available in standard cross louver or full specular parabolic reflector made of pure, anodised aluminium. .fixture complete with lamp , ballast and all accessories as required make Legero,Halomax,Philips

Mobile Charging Unit: Tender Technical Specification Supply of prewired compact Mobile Charging Unit made of virgin CRCA Sheet with min. thickness 1.2mm. It shall be equipped with 2 charging Points (each point comprising of ISI marked modular 6A 1W Switch and modular 6A Sockets). Mobile Charging Unit Shall have 4nos of Modular 3Amp rated 2module Type A plus C USB charging ports switched with 6A modular switch. Unit shall have ISI marked overcurrent protection device in incoming. Charging DB shall have detachable type front tray with fixing arrangements and also have detachable type 4Nos. pockets on both sides. It shall have key mounting holes to make it suitable for wall mounting. Mobile charging unit shall be treated with anticorrosive coating, finally epoxy powder coated and have IP20 degree of protection. To ensure the safety of user unit shall have proper size neutral and earth links and earthing stud on body also. Complete unit shall be manufactured at a plant certified with QMS and EMS certifications like ISO9001, ISO14001 and ISO45001 to ensure good quality product. Makes: Indoasian, Legrand, Schneider.

`SOLAR GARDEN LIGHT VEENA ENTERPRISES - PRODUCT CODE:VI-SS CONICAL (STEPS) HOUSING P.C. and S.S HEIGHT : 11” DIA : 9” SOLAR PANEL - 4W TOP MOUNT BATTERY : LITHIUM ION BANK 8800mAh DUSK TO DAWN - ELECTRONIC CIRCUIT AUTOMATIC SWITCHING ADDITIONAL BUILT IN MANUAL SWITCH `

Supply of flowing size of XLPE insulated PVC sheated aluminium conductor armoured cable of 1.1 KV grade on existing cable tray / surface including saddle , clamp ect. Commplete as required . 4CX25sqmm.(Aluminium)

Supply of flowing size of XLPE insulated PVC sheated aluminium conductor armoured cable of 1.1 KV grade on existing cable tray / surface including saddle , clamp ect. Commplete as required . 31/2CX35sqmm.(Aluminium)

Supply of flowing size of XLPE insulated PVC sheated aluminium conductor armoured cable of 1.1 KV grade on existing cable tray / surface including saddle , clamp ect. Commplete as required . 31/2CX70sqmm.(Aluminium)

Supply of flowing size of XLPE insulated PVC sheated aluminium conductor armoured cable of 1.1 KV grade on existing cable tray / surface including saddle , clamp ect. Commplete as required . 31/2CX120sqmm.(Aluminium)

Supply of flowing size of XLPE insulated PVC sheated aluminium conductor armoured cable of 1.1 KV grade on existing cable tray / surface including saddle , clamp ect. Commplete as required . 31/2CX240sqmm.(Aluminium)

Supply , installation , testing and commissioning of cubical type floor mounted panel suitable for 415 V , 3 phase , 4wire 50 Hz AC supply system of minimum depth 300mm fabricated in compartmentalized design from CRCA sheet steel of 3mm. Thick for frame work and covers , 3mm thick for gland plate i/c cleaning complete with 7 tank process for powder coating in approved shade , having 150 Amp capacity extensible type TPN Aluminium alloy bus bars of high conductivity , DMC / SMC bus bar supports ,with short circuit withstand capacity of 31 mva for 1 set . with 2 no. earth stud , solid connections from main bus bar to switch gears with required size of Al. bus bar making interconnection etc providing and fixing following switch gears :-(Cable entry from bottom ) 63 Amp 4 Pole MCCB with 25 KA breaking capity - 1 set .

Supply of decorative post top fixture Vak make `DOCK` having 405mm width and height of fixture is 313mm with 40W LED, which is suitable for 60mm mounting, Fitting made with corrosion resistant Dia cast aluminum, rubber gaskets are also provided for dust and water protection polycarbonates (p) diffuser is used. Polycarbonates(pc) dual diffuser it used for anty gearing and evenness of light distribution. LED should be mounted on MC PCB Decorative casting parts are powder coated. 10kv SPD to be used. Supply of decorative GI STEP pole (without foundation bolt )total height of the pole is is Lower part of the pole having 114mm Dia, and height is 1000mm. Upper part of the pole having 60mm Dia and height is 2000mm. DECORATIVE CASTING PART ARE Powder coated ,square base plate having 250mmX250mm with 10mm thickness. Out 4- way connector 40amp suitable for 105q mm wire with 6-amp single pole MCB.