Directorate Of Urban Local Bodies Tender

Basic cost of Ext. ROM (Extended Rotary Handle) of load 400A

Basic cost of Spreader Link 400A.

Analysis of Rates for Making house connection of sewer line damaged during Excavation.

SAnalysis of Rates for Making house connection of sewer line damaged during Excavation.

Supply and erection of copper 800 A Bus Bar where heat can be quickly dispersed, copper bus bar are frequently used as electrical conductors in over distribution system with ISI marked complete in all respect as per standard specification up to the entire satisfaction up to the entire of Engineer-in-charge (Make: - LandT/Havells/Schneider)b

Supply and erection of Current transformer coil set 800/5A 15VA with ISI marked complete in all respect as per standard specification up to the entire satisfaction up to the entire of Engineer-in-charge (Make: - LandT/Havells/Schneider)v

Designing, Fabricating, Manufacturing and Installation of Glass Reinforced Concrete G.R.C. Formliners of make 15- 25 mm thickness in approved size, pattern, design, and thickness with Dry Fixing method, The formliners should be made from `53 grade` approved White Portland cement in Grade 8, quartz, fine silica sand, alkali resistant glass fiber manufactured. olymers manufactured by approved manufacturer or equivalent, super plasticizer manufactured by approved manufacturer or equivalent with UV resistant synthetic inorganic pigments made by approved manufacturer or equivalent. The material casting should be dome in synthetic rubber/FRP Fixing of (Glass Fiber Reinforced Form liner) GRC Formliners to be fixed o n / between RCC/ Block work Column or structural steel work with Dry Fixing method with appropriate steel frame work, using fasteners, and necessary hardware etc, in Building Facade. The formliners shall be securely fixed with stainless steel bolts and anchor fastener (304 grade) of required size at specified locations. The fixing shall be done by the pecialized approved agency as directed by Engineer-in-Charge.

Supply, erection, testing and commissioning of 3 phase Automatic timer AMSons/LandT/Indoasian/CandD make to ON/OFF the street light on different fixed timing maintainable on street light pedestal, pillar, wall M.S. pedestal where ON/OFF point is available, cabinet is fabricated from 22 gauge, painting, wiring, connection ON/OFF from bottom of the cabinet, 3 contractors 25 Amp, 24 volts D.C. each 2 transformers, rectifier system, switching system, Bakelite contractor, 32 Amp, MCB, 32 amp Havells digital timer Auto/Manual system, time setter, fiber sheet, rubber, and plastic component, wiring and component fitting, chemical (Epoxy) the job includes allied material, labour, erection, testing and commission at site including cost of material complete in all respect up to the entire satisfaction of Engineer-in-Charge..

Supply and Erection of 5mtr decorative M.S PU Painted pole Model SDP 40W AL 5M N-TOURCH SWG with FLAG Colour integrated light with Single Arm bracket with 60W decorative LED light model SLE PT 60W-VEGA (TM) VI and 750mm overhang having base plate having dimensions 400x400x16mm and laser cut smooth finished edged curved slots 22x44mm for circular adjustment/alignment of pole on Pre- made foundations. Top Dia 76mm, middle section 150mm and bottom section 165mm. The pole middle part illuminated in Green colour 666mm, White 666mmm and Saffron 666mm with polycarbonate single Piece tubular structure of 2000mm length in single piece 150mm O.D. with average thickness of 3mm as per drawing. Illuminated diffuser is made of UV stabilized PC back lit by 40W led mounted PCB with I2V constant voltage driver, LED a CRI 70 The luminaire shall have a life class of 50,000 hours and driver efficiency of 80%, THD 0.9, Internal surge protection of 4 kV with 10kv additional SPD. Led Should be of 50,000 burning hours.The pole shall also be provided with flush door at the bottom, opening cut with Fiber laser technology ensuring accurate size and smooth edge finish and least cutting clearance with proper strengthening to the cutout of the door opening. A junction/ looping box with 63 Amps heavy duty 4Way TPN connector shall be built into the pole along with DIN rail toMount SP MCBThe pole shall be made of mild steel with precision machining and filling job to achieve good finish and a fine coat of primer on each element before assembling. A fier assemble of each one coat of primer and two coats of P.U paint are applied. Approve colour UV resist coating of mat/glossy/metallic finish followed after air drying of pole. The pole must be of IP 66 rating. The pole shall have a waterproof flush door and locking arrangement complete in all aspects with all accessories without foundation bolts.(Make: -Surya/Crompton/Bajaj/Glowmac/Vipin ST Poles/Vek)

Providing and fixing 6 mm thick ACP (HPL)sheet solid color fitted with 25 mm x 40 mm x 2 mm aluminum tube on site with fitting labor complete in all respect