Directorate Of Urban Local Bodies Tender

`Supply of PVC/XLPE INSULATED (HEAVY DUTY) ELECTRICAL CABLES FOR WORKING VOLTAGE UPTO AND INCLUDING 1100 VOLTS TO IS:1554 (PART-I) 1988/7098 (Part – I) WTH ALUMINIUM CONDUCTOR – ISI MARKED POWER CABLE- ALUMINIUM CONDUCTOR Low tension Power Un armoured Cable having solid aluminium conductor of Size 16 Sq mm 3 Core Make: Grandlay/Havells/Polycab`

Electric Meter Connection of 5 kw 3 phase from UHBVN complete in all respect. Note:- Actual Payment of this item will be made in accordance with payment receipt of UHBVN

Supply installation testing and commissioning of Bloat F surface mounted LED linear fixture with elliptical beam( 20 degrees x 50 degrees) with wattage not more than 24W, CCT-3000K, CRI)80. LEDs in fixture should be of Macadam step 3 or less. Fixture to be made of 6063 aluminium alloy housing. Silicone clear gasket. SS fasteners. Mechanical resistance IK06, IP65 tempered toughened glass . This luminaire contains built-in LED modules. LED modules are engineered accordingly to Lifespan of the luminaire ) 50,000 hours at 40°C. Operating ambient temperature range is from -15°C to plus 50°C. Driver efficiency )80% (integral), power factor )0.90, THD (20%, Surge protection 3KV. Make: keselec /VAK/Jaquar with 5 year DLP

SUPPLY, ERECTION Testing and Commissioning Decorative column light shall be made of Durable Mild Steel with a total height of 3mtr above ground level. The pole bottom section shall be of 220x220x3000mm long with top illuminated part of spot light in different direction along with predefined Laser cut pattern on the lower side. The base plate shall be of dimension 209x209x10mm. The Service door shall be provided at bottom part of the pole which equipped with a C clamp with sliding nuts to accommodate a built in connection box. The control gear tray is prewired with MCB, terminal connectors for loop in loop out arrangement. The base plate of the pole shall be designed with elongated foundation holes for fine alignment of the pole during installation. Fitting shall be made of corrosion resistant zinc plated ERW MS tubular sections. Diffuser of impact resistant PMMA specially design for efficient lighting. Colour tolerance ,3 SCDM to avoid colour deviation. Column light provide Diffused symmetric light without glare. All the LED to be tested LM80 test method. Decorative Column shall be primarily coated with epoxy resin and top coated with UV stabilized powder coat of Black/dark grey. All exterior parts are made of stainless steel. Silicone rubber gasket shall be provided for water protection. Light output of LED source shall be more than 110lm/ watt, CRI)70, Surge protection 3k, operating voltage 140-270V, wired with Branded LEDs of Osram/ Cree and Fulham or equivalent constant voltage/current driver with efficiency)85%, power factor)0.9, THD(=10%. The CCT of led will be 3000k per as requirement. Led burning of 50,000 hoursMake: keselec /VAK/Jaquar with 5 year DLP Note: The pole would be inspected by the inspection committee of the MC Panipat and only after that technical inspection Pole will be finalized for erection at site