Department Of Sports And Youth Affairs Tender
If you want to inquire about any e-tender the Haryana government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Haryana tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Haryana etender you're looking for. Read further to learn how to search and bid for etender Haryana.
Costs
EMD
₹ 10,30,800Document Cost
₹ 3,000Tender Fee
₹ 1,180
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_HRY_380485_1Tender No
25_2024Tender Authority
Department Of Sports And Youth Affairs ViewPurchaser Address
-Website
http://etenders.hry.nic.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
4.31.1
Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.
Above 1.50 m to 3.00 mtr depth
153.57
23373
-
4.31.2
Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.
Above 3.00 m to 4.50 mtr depth
80.57
17113
-
4.32
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. .(HSR 4.32)
271.54
14744
-
4.33
Excavating, supplying and filling of local earth (including royalty) by mechanical transport up to a lead of 1 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.
3086.85
790542
-
4.39
Providing and injecting chemical emulsion for PRE-CONSTRUCTIONAL anti termite treatment and creating a chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filing junction of wall and floor, along with the external perimetre of building, expansion joints surrounding of pipes and conduit etc, complete (plinth area of the building at ground floor only shall be measured) using Chlorpyriphos/ Lindane emulsifiable concentrate of 20%
772.47
258854
-
6.1.2
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: .(HSR 6.1)
1:2:4 (1 cement : 2 coarse sand (zone-Ill) : 4 graded stone aggregate 20 mm nominal size)
2.23
9146
-
6.1.3
1 :2: 4 ( 1 Cement : 2 coarse sand (zone-Ill) : 4 graded stone aggregate 40 mm nominal size) (HSR 6.1.3)
171.29
692474
-
6.1.6
1 :4: 8 ( 1 Cement : 4 coarse sand (zone-Ill) : 8 graded stone aggregate 40 mm nominal size) (HSR 6.1.6)
197.85
570124
-
6.1.6
1 :4: 8 ( 1 Cement : 4 coarse sand (zone-Ill) : 8 graded stone aggregate 40 mm nominal size) (HSR 6.1.6)
153.27
441662
-
6.1.7
1:5:10 (1 cement : 5 coarse sand (zone-Ill): 10 graded stone aggregate 40 mm nominal size) (HSR 6.1.7)
13.37
34582
-
6.8.2
Providing and laying 40 mm thick damp-proof course with cement concrete 1 :2:4 (1 cement : 2 coarse sand (zone-Ill): 4 graded stone aggregate 12.5mm nominal size) (HSR 6..8.2)
44.08
6916
-
6.10
Providing & applying a coat of residual petroleum bitumen of grade of VG-1 O of approved quality using 1. 7kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil. (HSR 6.10)
44.08
4681
-
6.12.1
20 mm thick cement plaster damp-proof course 1 :3 with 2 coats of bitumen at 1.65 kg. per sqm, laid hot and sanded: Vertical
79.53
23556
-
6.13
Making plinth protection 50mm thick of cement concrete 1 :3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. (HSR 6.13)
123.91
44743
-
6.14.1
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement-All work up to plinth level: 1 : 1. 5: 3 ( 1 cement : 1. 5 coarse sand (zone-Ill): 3 cum graded stone aggregate 20 mm nominal size)
80.94
417755
-
6.15.1
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor four level, excluding cost of centering, shuttering, finishing and reinforcement :
6.15.1 1:1.5:3 (1 cement : 1.5 coarse sand(zone-111) : 3 graded stone aggregate 20 mm nominal size)
41.71
293780
-
6.16
Reinforced cement concrete work in beams, suspended floors, cum roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor four level, excluding the cost of centering, shuttering, finishing and reinforcement with 1: 1.5:3 (1 cement : 1.5 coarse sand(zone-111) : 3 graded stone aggregate 20 mm nominal size).
34.45
248498
-
6.25.1
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.
All works up to plinth level
323.86
1705932
-
6.25.2
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.
All works above plinth level up to floor IV level
106.13
563805
-
6.30.1
Centering and shuttering including strutting, propping etc. and removal of form for (HSR 6.30)
Foundations, footings, bases of columns, etc. for mass concrete (HSR 6.30.1)
270.89
49870
-
6.30.2
Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.
324.22
107900
-
6.30.3
Suspended floors, roofs, landings, balconies
168.17
41268
-
6.30.4
Shelves (Cast in situ)
31.26
8224
-
6.30.5
Lintels, beams, plinth beams, girders, bressumers and cantilevers (HSR 6.30.5)
961.48
335844
-
6.30.6
Columns, Pillars, Piers, Abutments, Posts and Struts (HSR 6.30.6)
371.95
115006
-
6.30.7
Stairs, (excluding landings) except spiral-staircases
19.5
6672
-
6.30.19
Weather shade, Chanas, corbels etc., including edges
6.75
2214
-
6.33.6
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Machanically treated bars of grade Fe-500D or more (HSR 6.33.6)
39372.02
2834785
-
6.34.6
Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect above plinth level.
7410
533520
-
6.33.6
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Machanically treated bars of grade Fe-500D or more (HSR 6.33.6)
7901.8
568929
-
7.21.1
Brick work with common burnt clay non-modular bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement: 4 coarse sand)
21.78
94910
-
7.21.2
Brick work with common burnt clay non-modular bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement: 6 coarse sand) (HSR 7.21.2)
230.19
959109
-
7.22.2
Brick work with common burnt clay non-modular bricks of class designation 7.5 in superstructure above plinth level up to floor IV level in all shapes and sizes in : Cement mortar 1:6 (1 cement: 6 coarse sand)
351.84
1644500
-
7.28.2
Half brick masonry with common burnt clay non-modular bricks of class designation 7.5 in superstructure above plinth level up to floor IV level. (Cement mortar 1 :4 ( 1 cement :4 coarse sand) (HSR 7.28.2)
51.89
29878
-
7.60
Dressing, Chamfering of bricks to required shape in masonry work
600
5100
-
8.8.1.2
Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1 :3 (1 cement : 3 coarse sand) and cement sluny @ 3.3 kg/sqm including pointing in white cement complete. With 8 mm thick Granite of any colour and shade
8 mm thick Granite of any colour and shade
523.98
1172929
-
8.17
Providing & fixing factory manufactured jali of reinforced cement concrete consisting of cement , coarse sand and 10mm & down gauge bajri in ratio of 1: 1 :2 with Bmm dia tor steel. Outer frame of the jail will be 50mm wide & 25mm thick & inner frame of jali will be 25mm wide and 25mm thick with smooth finish as per design approved by the Engineer-in-Charge including fixing in position up to any height with cement sand mortar 1 :4 complete in all
respect.
2.52
2298
-
8.26.2.2
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platfonns, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1 :4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. (HSR 8.26)
Granite of any colour and shade (HSR 8.26.2.2)
132.69
434652
-
8.27.2
Providing edge moulding to 18 mm thick Granite stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. (HSR 8.27.2)
485.34
131721
-
8.28
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platfonn, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
12
5564
-
9.10.1
Painting top of roofs with bitumen of approved quality @ 17kg per 10 sqm impregnated with a coat of coarse sand at 60 cudm per 10 sqm, including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete: With residual type petroleum bitumen of grade VG -10 (HSR 9.10.1)
300.94
33013
-
9.11.1
10 cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa @ 35 kg per cum of earth and gobri leaping with mix 1: 1 (1 clay : 1 cow dung) and covered with flat tile bricks, grouted with cement mortar 1: 3 (1 cement: 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finished neat: With common burnt clay non-modular brick tile of class designation 10
300.94
173281
-
9.17.1
Providing gola 75x75 mm in cement concrete 1: 2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1 :3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase (HSR 9.17.1)
331.02
43760
-
9.18
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1 :2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1 :3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. (HSR 9.18)
12
2082
-
9.46.3
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS: 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x1 Ox0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering up to 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charae but excludina the cost of oaintina with
12.5 mm thick tapered edge gypsum moisture resistant board
140.69
144094
-
9.49.2
Providing and fixing GI Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing 'C' wall angle of size 20x30x20 mm made of 0.5 mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm centre to centre, suspending the main C carrier of size 10x38x10 mm made of G.I steel 0.7 mm thick from the soffit with help of soffit cleat 37x27x25x1 .6 mm, rawl plugs of size 38x12 mm and C carrier suspension clip and main carrier bracket at 1000 mm c/c. Inverted triangle shaped Spring Tee having height of 24 mm and width of 34 mm made of GI steel 0.45 mm thick is then fixed to the main C carrier and in direction perpendicular to it at 600 mm centres with help of suspension brackets. Wherever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 gms/sqm (both side inclusive), fixing with clip in tiles into spring T with:
GI Metal Ceiling Clip in plain Bevelled edge global white colour tiles of size 600x600 and 0.5 mm thick with 25 mm height, made of G I sheet having galvanizing of 100 gms/ sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation.
576.72
839761
-
9.57.2
Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. (HSR 9.57)
110 mm diameter
7.4
1746
-
9.57.3
Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. (HSR 9.57)
150 mm diameter
68
21583
-
9.58.1.2
Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. (HSR 9.58)
110 mm coupler
4
387
-
9.58.5.2
110 mm bend (Bend 87.5°)
2
219
-
9.58.5.3
150 mm bend (Bend 87.5°)
10
1522
-
9.58.6.2
110 mm shoe
2
167
-
10.1
Providing and laying of base course of floors consisting of 100 mm thick cement 1 :8: 16 and 100 mm sand or stone filling. (HSR 10.1)
687.2
210832
-
10.3
Supplying and providing of Tangri River Sand under floors Including watering and compaction in 25cm layers, dressing etc. complete In all respects (As per item 10.2) (HSR 10.3)
202.56
118072
-
10.4
Providing and laying of screed of 50 mm thick cement concrete 1 :8:16 to be laid below the topping.
124.63
12936
-
10.11
Providing and laying of 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1 :2:4 (1 cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1 :2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.
46
21169
-
10.12
Providing and laying of 62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1: 2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1 :2 (1 cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.
453.81
225997
-
10.14
Providing a floating coat of 1.50 mm thick neat cement laid in one operation to the topping.
14.85
507
-
10.15
Extra for using hardner at top surface (3.5Kg /sqm) of trimix M25 to finish surface complete in all respect
453.81
91578
-
10.22.1
Providing and fixing glass strips in joints of terrazzo/ cement concrete floors : 40 mm wide and 4 mm thick
63
3269
-
10.30.2
Providing and laying of chequered precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1 :4 (1 cement: 4 coarse sand). (HSR 10.30)
Medium shade pigment using 50% white cement 50% Grey cement (HSR 10.30.2)
90
80073
-
10.50.1
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1 :4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
163.08
520926
-
10.63.4
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1 :4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.
Size of Tile 1000x1000 mm
118.7
187973
-
10.70.4
Extra for grouting the joints of floor tiles (600 x 600 mm) having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge.
Size of Tile 1000x1000 mm
118.7
11205
-
10.77
Providing and laying 80mm thick factory made cement concrete inter1ocking paver block of M -35 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over (BIS 15658:2006) and including 60mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.
500
375850
-
10.101
Providing & laying Epoxy Flooring 2mm thick ( overall thickness) with self levelling with Hi-build epoxy primer 100 micron thickness, self leveling epoxy screed 900 micron thickness, FQ sand and self levelling epoxy top coat having thickness 1000 micrones with all materials as mentioned required to provide desired finish to the entire satisfaction of the Engineer in charge,
453.81
318075
-
11.1.1
6 mm cement plaster of mix: 1 :3 (1 cement : 3 fine sand)
14.85
1139
-
11.4.2
10 mm thick cement plaster 1:3 on (under side of the ceiling ) (HSR 11.4.2)
893.68
90708
-
11.5.1
12 mm cement plaster of mix : 1 :2 (1 cement: 2 fine sand)
118.08
15185
-
11.5.2
12 mm cement plaster of mix : 1 :3 (1 cement: 3 fine sand)
129.15
14632
-
11.5.3
12 mm cement plaster of mix : 1 :4 (1 cement: 4 fine sand) (HSR 11.5.3)
1410.87
139817
-
11.6.2
15 mm cement plaster on the rough side of single or half brick wall of mix : 1 :6 (1 cement: 6 fine sand) (HSR 11.6.2)
1298.87
131835
-
11.7.2
20 mm cement plaster of mix : 1 :6 (1 cement: 4 fine sand)
1855.24
232090
-
11.17
Providing and fixing of chicken wire mesh for avoiding cracks in plaster with necessary nail/screws etc. complete in all respect to the entire satisfaction of engineer-in-charge
2686.49
741739
-
11.18
18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1 :5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1 :6 (1 cement : 6 fine sand).
124
18872
-
11.52
Cement rendering on plaster 1 mm thick
118.08
3896
-
11.58
Providing and applying two coats white cement based putty of approved brand and manufacturer, over plastered surface and grinding the surface smooth with sand paper to get en even and smooth finish including cost and carriage of all material , labour charges, scaffolding, sundries etc. complete
964.4
36454
-
11.59
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
4618.24
387008
-
11.65.1
Distempering Two or more coats on new work with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. (HSR 11.65.1)
2639
96587
-
11.67.1
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:
4382.24
113938
-
11.68
Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel work
131.98
2956
-
11.76
Preparation of ply wood surface for painting including sand papering the surface and applying filling with approved quality filler consisting of white lead, linseed oil, varnish and chalk mitti including finishing the surface to required finish complete.
30.24
1321
-
11.77
Applying pink primer or aluminium priming coat on wood work including preparation of surface, Knotting and stopping etc.
30.24
677
-
11.82.1
Painting the wooden metal surface with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work
150.98
8726
-
11.87.1
French spirit polishing: Two or more coats on new works including a coat of wood filler
23.33
3991
-
11.94.1
Finishing walls with textured exterior paint of required shade: New work (Two or more coats applied @ 3.28 litre/10 sqm) over and including priming coat
587.95
94365
-
11.95.1
Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) (HSR 11.95.1)
2355.69
244520
-
11.98.1
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. : New work (Two or more coats applied@ 1.43 litre/ 10 sqm Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm
1267.29
128629
-
12.36.1
35 mm thick including ISi marked Stainless Steel butt hinges with necessary screws
22.32
62815
-
12.39
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).
22.32
9164
-
12.74.1
Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete :
125x64x2.50 mm
44
3946
-
12.78.1
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : (HSR 12.78)
250x10 mm (HSR 12.78.1)
16
6022
-
12.78.2
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : (HSR 12.78)
200x10 mm (HSR 12.78.2)
20
6018
-
12.85.1
Providing and fixing bright finished brass handles with screws etc. complete: (HSR 12.85)
125 mm
16
3284
-
12.85.3
Providing and fixing bright finished brass handles with screws etc. complete: (HSR 12.85)
75 mm
20
2998
-
12.86
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. (HSR 12.86)
14
1503
-
12.89
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS: 3564, embossed on the body, door weight up to 3 6 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. (HSR 12.89)
14
11580
-
12.98.1
Providing and fixing aluminium sliding door bolts, ISi marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : (HSR 12.98)
300x16 mm (HSR 12.98.1)
11
2609
-
12.98.2
Providing and fixing aluminium sliding door bolts, ISi marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : (HSR 12.98)
250 mm x 16mm
2
422
-
12.121
Providing and fixing factory made door frame (single rebate) made out of single piece extruded solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 62 mm width & 32 mm thickness, frame will be mitred & Jointed with self driven self tapping screws of size 38 mm x 4 mm & PVC solvent cement, including fixing the frame to wall with suitable dia & length anchor fastener as per manufacturer's specification and direction of Engineer-in-charge.
72.62
33078
-
12.122.2
Providing and fixing factory made 30 mm thick door shutter made of solid PVC foam profile. The styles & rails shall be of size 75 mm x 30 mm having wall thickness 5 mm. The styles, top & bottom rails shall have one side wall thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power. The styles and rails shall be reinforced with M.S. tubes of size 33 mm x 17 mmx 1 mm, painted with primer , all four comers of reinforcement to be welded or sealed. Solid PVC extruded bidding (push fit type) will be set inside the styles and the rails with a cavity, to receive single piece extruded 5mm PVC sheet as panel. The styles and rails will be mitred cut and joint with the help of PVC solvent cement & self driven self tapping screws. Single piece extruded solid PVC lock rail of size 100 mm x 30 mm with wall thickness 5 mm & 15 mm integrally extruded in the middle of the lock rail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100mm x 8 mm complete as per manufacturer's specifications and direction of Engineer-in-charge.
Decorative finish (both side wood grained finish)
22.79
69571
-
12.126
Providing and Fixing factory made uPVC door frame, made of uPVC extruded sections, of size 65 mm x 55 mm with wall thickness 2.0 mm (:t 0.2 mm), corners of the door frame to be mitred cut and jointed with plastic brackets and stainless steel screws, reinforcing hinge side vertical of the frames with PVC profile of Size 28 mm x 30 mm having wall thickness 2 mm (±0.2 mm), including providing & fixing 3 Nos. of 125 mm long stainless steel hinges to the frame, fixing the frame with jamb with required number & size of anchor dash fasteners, all complete as per manufacturer's specification and direction
of Engineer-in-charge.
67.8
34483
-
12.134.4
Providing and fixing factory made uPVC white colour sliding glazed window up to 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x B mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
Three track three panels sliding window with fly proof S.S wire mesh (Two Nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of window above 1.75 sqm).
137.23
1151496
-
12.138
Providing and fixing casement handle made of zinc alloyed (white powder coated) for uPVC casement window with necessary screws etc. complete.
66
12150
-
12.141
Providing and fixing steel roller for uPVC sliding door with necessary screws etc. complete.
132
18070
-
12.142
Providing and fixing steel (white power coated) crescent lock for uPVC sliding window/ door with necessary screws etc. complete.
132
21648
-
12.9.8
Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture with matching wood beading
70.35
77532
-
12.160.1
Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight up to 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.
With stainless steel cover plate minimum 1.25 mm thickness
4
8963
-
12.163.3
Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge.
Polyester powder coated minimum thickness 50 micron
8
4653
-
12.164
Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.
6
2272
-
12.171
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).
10.8
43520
-
12.177.1
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge .
With toughened glass panes of 6 mm thickness (weight not less than 15 kg/sqm)
144.96
179779
-
13.3.2.1
Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 2.0 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 2.00 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge:
Profile C : Fixing with adjustable lugs with split end tail to each jamb
6
2577
-
13.8.1
Providing and fixing factory made ISi marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment).
Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size)
132.48
15009
-
13.10.2
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 5.5 mm thick glass panes
6
5621
-
13.29.2
Steel work welded in built up sections/ framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works (HSR 13.29.2)
15035.41
1471966
-
13.37.1
Supplying and fixing rolling shutters, of approved make, M.S. Laths, interlocked together through their entire length, and jointed together, at the end, by end locks mounted on specially designed pipe shaft, with brackets, side guides, 27.5 cm long wire spring grade no.2, and arrangement for inside and out-side locking with push and pull operation complete, including top cover 0.80 mm thick (payment is to be made for the exact size of opening where rolling shutter is to be fixed) :-
with 80 mm X 1.25 mm M.S. Laths
5
11758
-
13.38
Supplying and fixing rolling shutters, of approved make, M.S. Laths, interlocked together through their entire length, and jointed together, at the end, by end locks mounted on specially designed pipe shaft, with brackets, side guides, 27.5 cm long wire spring grade no.2, and arrangement for inside and out-side locking with push and pull operation complete, including top cover 0.80 mm thick (payment is to be made for the exact size of opening where rolling shutter is to be fixed) :-
Providing and fixing ball bearing for rolling shutters.
2
760
-
13.39.1
Extra for providing mechanical device chain and crank operation for operating rolling shutters.( Exceeding 10.00 sqm and up to 16.80 sqm in the area)
5
5534
-
13.41
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
962.14
449608
-
17.5.1
Loosening of the ground up to a level of 500 mm below the road crust, watered, graded and compacted at OMC in layers to meet requirement of table 300-2 for embankment construction as per technical clause 305 of MORT&H specifications
1141.9
71368
-
17.14.3
Granular Sub-Base with Close Graded Material - (Table:- 400-1) Plant mix method Cosntruction of granular sub-base by providing material as per G-III (table 400-I of MORT&H 5th revision) mixing in a mechanical mix plant at OMC, carriage of mixed material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per technical clause 401 of MORT&H specifications
128.38
181336
-
17.16.1
Lime Stabilisation for Improving Sub-grade : Laying and spreading available soil in the sub-grade on a prepared surface, pulverising, mixing the spreading soil in place with rotavator with 3 per cent slaked lime having minimum content of 70 per cent of CaO with motor grader and compacting with the road roller at OMC to achieve a desired dry density to form a layer of improved sub grade as per technical clause 402 of MORT&T specifications. By Mechanical Means
192.57
77028
-
17.23.1
Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density.complete as per technical clause 404 of MORT&H specifications [using Screening Type-A (13.2 mm agggregates)]
96.29
117935
-
17.45
Construction of un-reinforced M-40 grade concrete pavement with dowel jointed, over a prepared sub base with 43 grade OPC cement concrete coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a fully computerised batching and mixing plant as per approved mix design, transported to site in transit mixer with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing, complete as per clause 602 of MORT&H specifications.
Cement concrete manufactured in automatic batching plant (RMC plant) i/c transportation to site in transit mixer. to be laid with sensor Leveler
111.88
695736
-
20.25.1
(HSR 20.25) Cutting holes up to 23 cm square through brick work in mud walls for pipes and making good induding repointing, replastering and finishing according to existing finish where required.
(HSR 20.25.1) 11.43 cm thick wall
10
1086
-
20.25.2
(HSR 20.25) Cutting holes up to 23 cm square through brick work in mud walls for pipes and making good induding repointing, replastering and finishing according to existing finish where required.
(HSR 20.25.2) 22.86 cm thick wall
10
1605
-
20.76.5
Design, Supply & erection of transformer of standard make Required 25 KVA 11/0.433 KVA rating outdoor type 11 KVA V.C.B, panel, G.O. switch, H. Pole , H.T metering panel, APFC panel, battery charges, 11 KVA substation, entire cable network from G.O. switch to H.T metering equipment and from H.T metering to Transformer. From transformer to main to L.T, panel earthling, safety equipment, fenced enclosure for transformer, and any other contingent thereto complete in all respect as per approved make and directions of Engineer-in-charge as per respective capacity.
100 KVA
1
291978
-
20.89.5
Designing, Supply & erection of DG set of capacity given below with noise controlled devices acoustic of suitable rating, testing and commissioning of diesel generatinget, radiator cooled, 3 phase, 4 wire, 50 cycles 415 +(-)1% volts AC alternator coupled directly through a set of flexible coupling on a common MS fabricated base frame with diesel engine complete with suitable size incoming cable from generator to
change over/AMF panel, making 2nd incoming cable connection from transformer, outgoing cable connection from changeover/ standard panel, making second incoming cable connection from transformer, outgoing cable connection from changeover / STD panel to incomer of motor starter panel, fenced enclosure with platform for DG sets complete as per following detailed scope and specifications and directions of Engineer-in-charge.
The rating should be at 1500 RPM.
a) Diesel Engine
b) Alternator
c) Battery 24 v.
d) Base Plate.
e) suitable sq mm suitable core copper cable upto 40 metres.
f) Tools, standard panel
g) Metering set 415 VAC-1 set (Amp. meter, Volt Meter, ASS, VSS, Phase Indicator,
control fuse, frequency meter, CT's)
h) Metering set 60/5A/11 OV (Amp. Meter, Volt Meter)
i) Overload protection for DC-1 No.
j) Battery Charger 24V DC
k)Copper bus bar of suitable size
I) KWH meter 96 sqmm size
m) Starting fuse button and key switch9on/off)
n) Indicating lamps for low lubricated oil pressure, high coolant temperature, set
running, load on, De control and other required accessories complete in all respects
to the satisfaction of Engineer-in-charge
50 KVA
1
616860
-
21.28
Providing & fixing steel bar embedded plastic steps of size 263mm x 165mm of orange colour, confirming to specification in pump chambers,manholes etc., having minimum 3mm thick polypropylene polymer confirming to is:10910 encapsulated on 12mm dia ribbed steel bars per IS : 1786. The rate include cost of setting the same to correct lines and levels duly embedded in 1 :2:4 cement concrete including carriage, loading, uploading, stacking, handling, re-handling etc., complete in all respect to the satisfaction of Engineer-in-charge
113
39730
-
21.57.1.2
(HSR 21.57) Providing masonry plugs to ends of sewers of all types with 11.43 cm thick brick wall in cement sand mortar 1 :7 with 12 mm thick cement plaster 1: 6 (as required by the engineer-in-charge). (HSR 21.57.1.2) 150 mm
4
42
-
21.84.1
(HSR 21.84) Constructing brick masonry inspection Chamber sizes as given below up to 0.60 metre average depth in cement mortar 1 :5 lime concrete with 40 per cent lime mortar 2:3 in foundation cement concrete 1 :2:4 benching 12mm thick cement plaster 1 :2 with a floating coat of 1 mm thick of neat cement R.C.C. 1 :2:4 slab 100 mm thick/cement concrete topping, 50mm thick: with 455mmx455mm / 455mm x610mm inside light duty C.I. inspection chamber cover and frame weight as per 1.5.1. specification painted with 3 coats of black bitumastic superior paint complete as per standard design.
(HSR 21.84.1) Size 450 mm X450 mm inside (with 455 mm x 455 mm cover and frame light duty single seal weighing 20 kg with C.C. topping
3
12344
-
21.84.2
(HSR 21.84.2) Size 450 mm X 600 mm inside (with 455 mm x 610 mm cover and frame single seal pattern I weighing 38 kg with C.C. topping)
4
23491
-
21.85.1
Extra for every 0.30 metre depth of Inspection chamber (HSR 21.85.1) 450 mm x 450 mm inside
3
2697
-
21.85.2
Extra for every 0.30 metre depth of Inspection chamber 450 mmx 600 mm inside
8
7996
-
21.93.2
Providing and fixing SFRC MANHOLE COVERS AND FRAMES MARKED WITH IS: 12592 including setting the same to correct lines and levels in 1 :3 cement sand mortar over manhole including carriage loading unloading stacking handling re-handling etc. complete in all respects to the satisfaction to the Engineer-in-charge.
Type:- Extra Heavy Duty Set (EHD-20) 560MM Clear Opening
17
21222
-
21.100.2
(HSR 21.100) Making holes for HCL soil / Waste pipe by core cutting up to 200 mm thick slabs and sealing with Drip seal sealant complete in all respect.
(HSR 21.100.2) 100 mm dia pipe
34
25595
-
21.100.3
(HSR 21.100) Making holes for HCL soil / Waste pipe by core cutting up to 200 mm thick slabs and sealing with Drip seal sealant complete in all respect. 125 mm dia pipe
4
3832
-
21.100.4 Making holes for HCL soil / Waste pipe by core cutting up to 200 mm thick slabs and sealing with Drip seal sealant complete in all respect.
(HSR 21.100.4) 150 mm dia pipe
20
21900
-
22.1.4 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White vitreous chinaware Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap
7
12877
-
22.5 Providing and fixing white vitreous chinaware pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.
7
9118
-
22.10.1.2
(HSR 22.10) Providing and fixing Stainless Steel A ISi 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required (HSR 22.10.1) Kitchen sink with drain board 510x1040 mm bowl depth 225 mm
2
10200
-
22.15 Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.
12
10407
-
22.16 Providing and fixing 40mm i/d G.I. waste pipe embedded in walls up to floor level including cost of union and plumber joint
2
2008
-
22.20.2
Providing and fixing in position C.I. plain Nahani Trap conforming to I.S.I. specifications and of self cleaning design with C.P. brass hinged grating with frame complete With 75 mm internal diameter outlet
2
2761
-
22.22.1
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White vitreous chinaware Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
4
16486
-
22.33 Providing and fixing white vitreous chinaware extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous chinaware cistern / PVC cistern (with brass fitting) into the wall with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete.
1
12754
-
22.34 Providing and fixing floor mounted, white vitreous chinaware single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous chinaware cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge.
4
57584
-
22.38 Providing and fixing 8 mm dia C.P. I S.S. Jet with flexible tube up to 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge.
5
1422
-
22.42 Providing and fixing toilet paper holder C.P. brass (HSR 22.42.1)
5
2295
-
22.44 Providing and fixing 32 mm diameter GI. extension pipe for Indian type Water Closet suite complete with accessories(as approved by the Engineer -incharge)
4
4210
-
22.46 Providing and fixing white vitreous chinaware battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge.
6
39279
-
(HSR 22.49.1) Providing and fixing in position best Indian make White vitreous chinaware channel of size 600mmx150mm including laying and fixing in cement concrete 1 :2:4 complete as required by the Engineer-in-charge.
6
9869
-
(HSR 22.50.1.2.1) Providing and fixing White Vitreous Chinaware Partition plate Large size 835mm x 355 mm for different type of urinals.
6
8340
-
(HSR 22.121) Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2" BSP thread and shapes, weighing not less than 60 gms.
6
665
-
(HSR 22.53) Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. : (HSR 22.53.1) For 100 mm dia pipe
6
1026
-
(HSR 22.80.2.1)
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors Sand cast iron S&S as per IS - 3989
34
42887
-
(HSR 22.85.3) Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
Internal work - Exposed on wall
25 mm dia nominal bore
78
21442
-
(HSR 22.85.4) 32 mm dia nominal bore
10
3670
-
(HSR 22.85.5) 40 mm dia nominal bore
20
10148
-
(HSR 22.85.6) 50 mm dia nominal bore
100
76460
-
(HSR 22.86.1)
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
Concealed work, including cutting chases and making good the walls etc. 15 mm dia nominal bore
95
22980
-
(HSR 22.86.2) 20 mm dia nominal bore
70
21805
-
(HSR 22.91.6)
Providing and fixing G.I. pipes complete with G.I. fittings including trenching up to 0.30m to 1.00m depth and refilling etc. 50 mm dia nominal bore
100
47910
-
(HSR 22.92.1) Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete: 25 to 40 mm nominal bore
50
17285
-
(HSR 22.92.2) 50 to 80 mm nominal bore
50
50030
-
(HSR 22.93) Providing and filling sand envelope of grading zone grade, 100mm all-round the G.I. pipes in external work:
(22.93.6) 50mm diameter pipe
100
7790
-
(HSR 22.94) Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :
(HSR 22.94.1) 15 mm nominal bore
10
1463
-
(HSR 22.94) Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :
(HSR 22.94.2) 20 mm nominal bore
7
1280
-
(HSR 22.94) Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :
(HSR 22.94.3) 25 mm nominal bore
8
2001
-
(HSR 22.94) Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :
(HSR 22.94.5) 40 mm nominal bore
2
757
-
(HSR 22.94) Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : (HSR 22.94.6) 50 mm nominal bore
6
2832
-
(HSR 22.98.2)
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end): 20 mm nominal bore
4
1812
-
(HSR 22.98.3) 25 mm nominal bore
8
3908
-
(HSR 22.98.5) 50 mm nominal bore
7
6029
-
(HSR 22.102.1) Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet:
100 mm diameter
2
285
-
(HSR 22.103.3)
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore
4
1378
-
(HSR 11.107.3) Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work 25 mm diameter pipe
78
553
-
(HSR 22.104.1) Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore
9
3674
-
(HSR 22.105.1) Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.
15 mm nominal bore
4
2416
-
(HSR 22.106) Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms 15 mm nominal bore (HSR 22.106.1)
4
2157
-
(HSR 22.107.1) Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.
15 mm nominal bore (HSR 22.107.1)
44
26373
-
(HSR 22.108) Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore (HSR 22.108.1)
62
32481
-
(HSR 22.109) Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.
71
4103
-
(HSR 22.117) Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.
9
1349
-
(HSR 22.118) Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.
11
2168
-
(HSR 22.119.2)
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.
7
2973
-
(HSR 22.123) Providing and fixing PTMT grating of approved quality and colour.
22.123.1 Circular type 22.123.1.1 100 mm nominal dia
34
1084
-
(HSR 22.127) Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.
13
1565
-
(HSR 22.128.1) Providing and fixing Unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour.:
15 mm nominal bore with 30cm length
31
2303
-
(HSR 22.128.2) 15 mm nominal bore with 45 cm length
31
2817
-
(HSR 22.129.1)
Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and color: 15 mm nominal bore, weighing not less than 32 gms
20
896
-
(HSR 22.129.2) 20 mm nominal bore, weighing not less than 40 gms
20
1534
-
(HSR 22.129.3) 25mm nominal bore, weighing not less than 62 gms
40
4436
-
(HSR 22.158.1)
Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and the cost of rubber gasket: 100 mm diameter pipe
33.33
1886
-
(HSR 22.161.1)
Providing and laying Double Flanged (Screwed/ Welded) Centrifugally (Spun) Ductile Iron Pipes of Class K- 9 conforming to IS: 8329: 100 mm dia Ductile Iron Double Flanged
100
122960
-
(HSR 22.162.1) Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately):
100 mm diameter (Class I)
2
11903
-
(HSR 22.163.1) Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1: 1 (1 cement : 1 fine sand) including testing of joints etc. complete:
100 mm diameter
35
9663
-
(HSR 22.163.2) 150 mm diameter
75
31597
-
(HSR 22.164.1) Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design. 100 mm diameter S.W. pipe
35
13380
-
(HSR 22.164.2) 150 mm diameter S.W. pipe
75
35047
-
( HSR 22.166) Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:
7
12299
-
22.168.3
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1: 2 (1cement: 2 fine sand) including testing of joints etc. complete: 250 mm dia. R.C.C. pipe
36
19666
-
22.168.4
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1: 2 (1cement: 2 fine sand) including testing of joints etc. complete:
300 mm dia. R.C.C. pipe
45
30955
-
22.168.5
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1: 2 (1cement: 2 fine sand) including testing of joints etc. complete:
450 mm dia. R.C.C. pipe
30
34125
-
22.181
Providing and placing on terrace (at all floor levels) polyethylene water litre 7 8 storage tank, IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
4000
33200
-
22.205.1
Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1 :4 (1 cement : 4 coarse sand) including 500x450 mm pre cast R.C.C. horizontal grating with frame complete as per standard design :
With common burnt clay non-modular bricks of class designation 7.5
5
16644
-
22.207.1
Constructing brick masonry road gully chamber 110x50x77.5 cm with bricks in cement mortar 1 :4 (1 cement : 4 coarse sand) including 500x450 mm precast R.C.C. horizontal grating with frame and vertical grating complete as per standard design
With common burnt clay non-modular bricks of class designation 7.5
5
32231
-
(HSR 22.209) Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
5
4796
-
(HSR 22.211) Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.
7
4319
-
(HSR 22.212.1.3) Providing and fixing in position best Indian make coat and hat hooks fixed into wall with C.P. brass screws and rawl plugs etc. complete including cutting and making good the walls etc. Three Way
26
4141
-
(HSR 22.214) Providing and fixing in position best Indian make C.P. brass Tumbler cum Tooth Brush holder fixed in with rawl plugs with C.P. brass screws and complete including cutting and making good the walls etc.
5
1787
-
(HSR 22.216.1)
Providing and fixing in position best Indian make (to the approval of the engineer-in-charge) storage type automatic electric water heater, pressure/non-pressure type thermostatically controlled, suitable for operation on 230 volts, 50 cycles single phase vertical wall mounting fitted withdrawable and adjustable type AC, thermostat. Thermostat knob to be readily accessible through the opening of suitable cover for and adjustment of temperature in the installed position of heater and the thermostat should be withdrawn without having to drain the water, electric heating element made out of copper tube (heating element should be easily removed and replaced in the installed position of heater) A neon indicator 1 AMP, inner container made out of copper tinned both from inside and outside, outer container made out of mild steel sheet finished in gleaming white stove enamel paint, insulated between the inner and outer with fibre glass wool with 1 metre length of suitable capacity 3 core flexible cord with plug and non return valve plastic/lead connections or pressure release valve (where required). Complete including fixing and testing for a week (as required by Engineer-incharge. 25 Litres capacity
2
19083
-
(HSR 22.217) Providing and fixing in position concealed cistern including flushing plate of approved make (to the approval of the Engineer-in-charge) complete in all respect.
1
8405
-
(HSR 22.221.6)
Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) including Rack Bolt Screw Pair 115mm long without CP fittings complete in all respect. Size 560mm x 410mm (above counter oval)
5
13918
-
(HSR 22.222.2.2) Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. Single Socket Type B (HSR 22.222.2)
110mm old SWR UPVC pipe lines laid complete
126
47880
-
(HSR 22.222.2.4)
75 mm, Soil & Waste Pipe
139
39698
-
23.4.1.1
Wiring for Light/Fan/call bell point with modular type switch/socket and GI box,Modular type face plate etc. in 1.5 sqmm FRLS PVC insulated copper coductor cable in 1.6 mm thick PVC conduit pipe Group A.
44
26998
-
23.4.2.1
Wiring for Twin control light point with 2 nos , 2-ways, 5 amp. Modular switch GI box and modular face plate in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe. Group A
2
1897
-
23.4.3.1
Wiring for Light/Fan/call bell point in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1,6 mm thick PVC conduit pipe,without seperate control switch,Modular type switch/socket wiring. Group A
21
5575
-
23.4.4.1
Wiring in PVC conduit system for 3-pin 5amp. Plug point by using 2 no 1.5 sqmm FRLS copper wire and 1 no.1.5 sqmm FRLS copper wire ,including providing 1 no 5/6 Amp 3/5 pin Modular type socket and 1 no. 5/6 Amp Modular type switch required GI Box , modular face plate etc. complete as required (Group A).
16
13688
-
23.4.5.1
Wiring in PVC conduit system for 3-pin 15amp. Plug point by using 2 no 4 sqmm FRLS copper wire and 1 no.4 sqmm FRLS copper wire ,including providing 1 no1 5/16 Amp 3/6 pin Modular type socket and 1 no.15/16 Amp Modular type switch required GI Box , modular face plate etc. complete as required (Group A).
14
16503
-
23.7.6.1
Supply and erection of PVC conduit pipe ISI marked medium recessed in slab/wall/ceiling etc. including cost of PVC bends,inspection box and all other materials required to complete the job in all respects up to the entire satisfaction of Engineer-incharge of work
PVC Conduit pipe 20mm dia.
50
1535
-
23.7.6.2
Supply and erection of PVC conduit pipe ISI marked medium recessed in slab/wall/ceiling etc. including cost of PVC bends,inspection box and all other materials required to complete the job in all respects up to the entire satisfaction of Engineer-incharge of work
PVC Conduit pipe 25mm dia.
150
5670
-
23.8.1.5
Ceiling rose flush/surface type
10
212
-
23.8.1.7 Electric buzzer 220/230 volts A.C. Bakelite with double coil.
4
231
-
23.8.1.12
Bakelite angle/straight button holder large size.
10
543
-
23.8.1.14
telephone socket
5
165
-
23.8.4
Supply and erection of 10.5 cm dia M.S.Fan box including 8 mm dia 30 cm long MS Rod made into suitable suspension hook and erected in RCC slab for erection of fan complete with all labour and material required to complete the job.
6
672
-
23.8.10.1
Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and materials required for the job complete in all respects.
1 & 2 Modules including combined plate for Telephone and data
2
219
-
23.8.10.2
3 Modules
12
1798
-
23.8.10.3
4 Modules
4
660
-
23.8.10.4
6 Modules
4
878
-
23.8.10.5
8 Modules
5
1374
-
23.8.10.6
12 Modules
2
665
-
23.8.11.7
Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections,complete in all respects.
step type Fan Regulator 2 modules 300 watt
6
1819
-
23.8.11.8
Telephone Socket outlet modular type
1
88
-
23.8.11.9
TV Socket outlet modular type
2
177
-
23.8.11.10
Blanking plate
30
636
-
23.8.11.11
RJ 45 Computer DATA socket outlet for CAT 6 or CAT6e cable Modular type.
5
1793
-
23.9
Erection of exhaust fan in existing opening ,complete with necessary earthling of fan including carriage from PWD store to site of work
2
257
-
23.22.1.3
Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/panel inldg.bonding to earth and making necessray connections required to complete the job in all respects upto the entire satisfaction of Engineer-in-charge of work
TRIPLE POLE MCCB 16 to 100 Amp, 25 KA
8
43754
-
23.22.1.4
TRIPLE POLE MCCB 125 to 160 Amp, 25 KA
4
24775
-
23.22.1.5
TRIPLE POLE MCCB 200 to 250 Amp, 25 KA
1
10120
-
23.22.1.7
TRIPLE POLE MCCB 400 Amp, 50 KA
1
19228
-
23.22.4.2
Supply and erection of double door sheet steel enclosure distribution board suitable for MCBs and ELCBs etc.required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of work.
SPN DB Double Door 8 way ( 2 incoming and 6 outgoing)
1
1659
-
23.22.4.7
TPN DB Horizontal type Double Door 8 way ( 8 incoming and 3phase*8 outgoing).
1
4670
-
23.2.5.1
Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution boards including making necessary connections.
6 amp. to 32 amp Single Pole
78
13345
-
23.2.5.2
40 amp to 63 amp. Single Pole
6
2180
-
23.2.5.4
40 amp to 63 amp. Double pole
1
798
-
23.2.5.6
40 amp to 63 amp. MCB's TRIPLE POLE
3
3674
-
23.2.8.3
SITC Four pole ON LOAD Manual change over switch in SS enclosure of following ratings.
200 amp 415 volts
1
17651
-
23.23.6.2
Supply and erection of M S cable tray duly painted as required including erection of the same on wall ceiling with necessary fixture and other material required to complete the job in all respect upto the entire satisfaction of Engineer -in -charge of work.
MS perforated cable tray painted with powder coating 200 X 50 x2mm
100
41420
-
23.23.6.4
Supply and erection of M S cable tray duly painted as required including erection of the same on wall ceiling with necessary fixture and other material required to complete the job in all respect upto the entire satisfaction of Engineer -in -charge of work.
MS perforated cable tray painted with powder coating 600 X 50 x2mm
100
55930
-
23.23.8.1
Supply and laying of multicore telephone cable conductor size 0.51 mm bright anealed copper conductor PVC insulated and screened in existing pipe/channel and making necessary connection complete in all respects uo to the entire satisfaction of Engineer-in -charge of work.
2 pair telephone wire
100
830
-
23.23.8.2
Supply and laying of multicore telephone cable conductor size 0.51 mm bright anealed copper conductor PVC insulated and screened in existing pipe/channel and making necessary connection complete in all respects uo to the entire satisfaction of Engineer-in -charge of work.
4 pair telephone wire
30
495
-
23.23.9 Supplying and drawing of 1 no UTP 4 pair CAT 6 LAN Cable in the existing surface/recess MS/PVC conduit as required.
150
5490
-
24.1.1
Earthing with GL earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc.(but without charcoal or coke and salt) as required.
6
19264
-
24.1.2
Extra for using salt and char coal/coke for pipe earth electrode as required.
6
4616
-
24.1.3
Earthing with G.I. earth plate 600 mmx 600 mm x 6 mm thick including accessories and providing masonary enclosures with cover plate having locking arrangement and watering pipe etc.((but without charcoal or coke and salt) as required.
4
15896
-
24.1.4
Earthing with Copper earth plate 600 mmx 600 mm x3.15 mm thick including accessories and providing masonary enclosures with cover plate having locking arrangement and watering pipe etc.((but without charcoal or coke and salt) as required.
4
39058
-
24.1.5
Extra for charcoal or coke and salt for G. I. plate or copper plate earth electrode
4
3780
-
24.1.6
Supplying and laying 25mm x 3mm G.I. strip at 0.5 metre below ground as strip earth electrode including soldering etc. as required.
40
2220
-
24.1.7
Supplying and laying 25mm x 3mm G.I. strip in 40mm dia GI Pipe as/from earth electrode including soldering etc. as required.
40
16992
-
24.1.8
Providing and fixing 25 mm x 3mm G.I. strip on surface or in recess for connections etc.as required with all labour and material connections etc. as required.
40
4532
-
24.1.9
Supplying and laying 25mm x 5mm G.I. strip in 40mm dia GI Pipe as/from earth electrode including soldering etc. as required.
40
34456
-
24.1.13
Providing and fixing 4.00 mm dia G1. Wire on surface or in recess for loop earthing as required.
60
1488
-
24.1.14
Supply and erection of 20mm x 3 mm thick GI, tape fixed with suitable G.I.staples of the same size.
60
4392
-
24.2.6.1
Supply and erection of copper lugs including crimping etc.to the entire satisfaction of Engineer-in-charge of the work.
1.5 sqmm
60
282
-
24.2.6.2
Supply and erection of copper lugs including crimping etc.to the entire satisfaction of Engineer-in-charge of the work.
2.5 sqmm
60
282
-
24.2.6.3
Supply and erection of copper lugs including crimping etc.to the entire satisfaction of Engineer-in-charge of the work.
4 sqmm
50
295
-
24.2.6.4
Supply and erection of copper lugs including crimping etc.to the entire satisfaction of Engineer-in-charge of the work.
6 sqmm
10
94
-
24.2.6.5
Supply and erection of copper lugs including crimping etc.to the entire satisfaction of Engineer-in-charge of the work.
10 sqmm
40
424
-
24.2.7.1
Supply and erection of suitable compression type glands for Under ground Cables
Upto 6sqmm cable 2 to 4 core cables
10
378
-
24.2.7.2
Supply and erection of suitable compression type glands for Under ground Cables
10sqmm 16 sqmm cable 2 to 4 core cables
10
531
-
24.2.7.3
Supply and erection of suitable compression type glands for Under ground Cables
25sqmm 50 sqmm cable 2 to 4 core cables
8
727
-
24.2.7.5
Supply and erection of suitable compression type glands for Under ground Cables
120sqmm 185 sqmm cable 3.5 to 4 core cables
8
1255
-
24.2.8.1
supply and erection of aluminium lugs heavy duty including crimping etc. up to the enire satisfaction of Engineer-in-charge of the work
1.5sqmm-2.5 sqmm
5
17
-
24.2.8.2
supply and erection of aluminium lugs heavy duty including crimping etc. up to the enire satisfaction of Engineer-in-charge of the work
4sqmm-6 sqmm
8
37
-
24.2.8.3
supply and erection of aluminium lugs heavy duty including crimping etc. up to the enire satisfaction of Engineer-in-charge of the work
10 sqmm
32
227
-
24.2.8.5
supply and erection of aluminium lugs heavy duty including crimping etc. up to the enire satisfaction of Engineer-in-charge of the work
25sqmm
40
472
-
24.2.8.7
supply and erection of aluminium lugs heavy duty including crimping etc. up to the enire satisfaction of Engineer-in-charge of the work
50 sqmm
8
141
-
24.2.8.13
supply and erection of aluminium lugs heavy duty including crimping etc. up to the enire satisfaction of Engineer-in-charge of the work
240 sqmm
12
1005
-
24.2.10
Supply and erection of cable route marker made of 50cm long 10 mm dia MS Rod welded/rivetted at the top with 10 cm dia 3 mm thick MS plate inscribed with cable word on word on it ,having cross arm 30 cm long of the same dia welded at the bottom ,in the existing trench 45 cm below ground level
50
14160
-
24.3.3.1
Supply and making indoor cable termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core ,XLPE aluminium conductor cable of 11KV grade as required.
70-120 sqmm
4
33743
-
24.3.4.1
Supply and making outdoor cable termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core ,XLPE aluminium conductor cable of 11KV grade as required.
70-120 sqmm
2
27177
-
25.4.4
Supplying, fixing, testing and commissioning o NON - RETURN VALVE with dual plate of C I body SS plates vulcanized NBR seal flanged end & PN 16 pressure rating as specified.
100mm dia
3
14783
-
22.181
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
25000
207500
-
32.28
Providing and fixing roofing consist of 0.8 mm thick galvanized steel deck sheet confirming to IS 277:1992 used as permanent shuttering over which MS wire mesh 3mm laid at 100x100 mm grid including edge trim covered with concrete. This metal deck will be supported on structural steel beam with shear studs. (Structural steel like Beam, column, joists etc. & concrete of different grade as per design will be paid separately).
847.26
994767
-
33.6.1.3
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, up to 90 metre depth below ground level.
400 mm dia
90
75933
-
33.8.2
Supplying, assembling, lowering and fixing in vertical position in bore well, Unplasticised PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.
150 mm nominal size dia
70
49063
-
33.9.2
Supplying, assembling, lowering and fixing in vertical position in bore well Unplasticised PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.
150 mm nominal size dia
20
15152
-
33.12
Supplying, filling, spreading & levelling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-incharge.
1.8
2206
-
33.13
Supplying, filling, spreading & levelling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
1.8
2206
-
33.14
Supplying, filling, spreading & levelling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge
1.8
2206
-
33.15
Gravel packing in tube well construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.
32.81
45143
-
33.18.3
Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tube well as per IS:2800 (part I).
200 mm dia
1
305
-
33.17.2
Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tube well as per IS: 2800 (part I), including necessary bolts & nuts of required size complete
150 mm clamp
1
1405
-
34.2.1
Construction of cement concrete kerb with channel with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M10 grade foundation 150 mm thick, kerb channel 300 mm wide, 50 mm thick in PCCM20 grade, sloped towards the kerb, kerb stone with channel laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 408 (Using Concrete Mixer)
220.2
100565
-
34.26
Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface : Providing and laying of hot applied thermoplastic compound 2.5 mm thick including Reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.
Note:- 1. A sealing primer may be applied in advance on cement concrete pavement to ensure proper bonding. Any laitance and/or curing compound to be removed where paint is required to be applied on concrete surface.
2.Cost of painter is already included in hire charges of road marking machine.
26
16629
-
34.34
Moulded Shank Road Stud : Supplying and fixing of single mould twin shank reflective road studs made out of poly carbonate/ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face with retro reflectance and chromaticity values@ ASTM E 809 & ASTM D 4280. The detailed specifications and the product shall conform to ASTM D4280 and ASTM E 809. The raised pavement marker shall also meet all the testing conditions of ASTM D4280 like abrasion resistance and fixed to the road surface using the epoxy adhesive. Two cylinderical polymer shanks of not less than 20 mm diameter and not less than 30 mm length shall be moulded in the RPM body. The marker shall support a load of 13635 Kg tested in accordance with ASTM D4280. The marker shall withstand flexural strength of 909 kgf force in accordance with ASTM D4280. Marker lenses shall be moulded of Polycarbonate or methyl Methacrylate conforming to ASTM D788. The supplier shall provide a 2 years warranty for satisfactory field performance as per clause 804.7.3 of MORT&H 5th revision specifications.
50
14220
-
N.S. Item (Based on DSR 12.42)
(NS) Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. (Based on DSR 12.42)
Single pushfit Coupler 110 mm
1
115
-
N.S. Item (Based on DSR 12.42)
Single tee with door 110x110x110 mm
1
216
-
N.S. Item (Based on DSR 12.42)
Single tee without door 110x110x110 mm
1
200
-
N.S. Item (Based on DSR 12.42)
Bend 87.5° 110 mm bend
1
137
-
N.S. Item (Based on DSR 12.42)
Shoe (Plain) 110 mm
1
121
-
N.S. Item (Based on DSR 12.42)
Vent Cowl 110 mm
1
68
-
N.S. Item (Based on DSR 12.42)
Single pushfit Coupler 75 mm
1
94
-
N.S. Item (Based on DSR 12.42)
Single tee with door 75x75x75 mm
1
165
-
N.S. Item (Based on DSR 12.42)
Single tee without door 75x75x75 mm
1
147
-
N.S. Item (Based on DSR 12.42)
Bend 87.5° 75 mm bend
1
106
-
N.S. Item (Based on DSR 12.42)
Shoe (Plain) 75 mm
1
94
-
N.S. Item (Based on DSR 12.42)
Vent Cowl 75 mm
1
106
-
DSR 17.2.1.1
Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system (which is part of the schedule of work under SH: PA System) and shall be complete with all accessories . The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as per specifications
Two Loop Panel. (239225-20%)
1
225828
-
DSR 17.2.3
Supplying, installation, testing & commissioning of repeater panel wih 320 character/ Touch screen LCD display with inbuilt reset, acknowledge and silence switches complete as required. (108688-20%)
1
102601
-
DSR 17.2.4
Supplying, installation, testing & commissioning of intelligent addressable thermal detector with rate of rise cum fixed tempreature thermistor complete with base as required. (Heat Detector ) (2858-20%)
2
4880
-
DSR 17.2.9
Supplying, installation, testing & commissioning of intelligent addressable thermal detector with rate of rise cum fixed tempreature thermistor complete with base as required. (Smoke Detector ) (2726-20%)
45
115798
-
DSR 17.2.10
Supplying, installation, testing & commissioning of addressable fire control module complete as required (3003-20%)
5
14174
-
DSR 17.2.14
Supplying, installation, testing & commissioning of addressable manual call point complete as required. (3871-20%)
3
10962
-
DSR 17.2.15
Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required. ( 3506-20%)
3
9929
-
DSR 17.2.5
Supplying, installation, testing & commissioning response indicator on surface/recess MS box having two LEDs metallic cover complete with all connections etc. as required. (276-20%)
3
781
-
DSR 17.2.12
Supplying, installation, testing & commissioning of addressable beam detector with short circuit isolator (inbuilt or seperate) complete with emitter and receiver including connections with remote test features etc complete as required. (74937-20%)
2
141481
-
DSR 17.5.2
Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath
complete as required. (173-20%)
450
73485
-
DSR 17.5.3.1
Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required.
speaker cable Single pair, 2-core, 1.5 sqmm (54-20%)
100
5100
-
DSR 17.5.3.2
speaker cable Two pair, 2-core, 1.5 sqmm (89-20%)
10
840
-
DSR 17.5.3.3
speaker cable three pair, 2-core, 1.5 sqmm (123-20%)
10
1161
-
DSR 17.5.3.4
speaker cable four pair, 2-core, 1.5 sqmm (158-20%)
10
373
-
DSR 17.5.4
Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and accessories like coupler etc. as required. (53-20%)
400
20000
-
DSR 18.4.2
Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump) (a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520
b) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325.
(c) M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required.
(d) Suitable cement concrete foundation duly plastered and with anti vibration pads.
900 lpm at 35 m Head (101859-20%)
2
192309
-
DSR 18.6.2
Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes
complete as required.
150 mm. Dia (3804-20%)
10
35910
-
DSR 18.7.1
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/ support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 25 mm dia (744-20%)
55
38626
-
DSR 18.7.2
32 mm dia (851-20%)
8
6426
-
DSR 18.7.3
40 mm dia (1034-40%)
8
7808
-
DSR 18.7.7
100 mm dia (2555-20%)
32
77180
-
DSR 18.9.1
Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/ Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/ Stainless Steel cap and chain as required : [DSR-Wet Riser & Sprinkler : 9] Single headed Gunmetal (7646-20%)
2
14058
-
DSR 18.11.5
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 100 mm dia (6667-20%)
5
31468
-
DSR 18.12.5
Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required :
100mm dia (14641-20%)
3
41463
-
DSR 18.13
Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required. (1321-20%)
2
2494
-
DSR 18.15.2
Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange. 100mm dia (6664-20%)
2
12581
-
DSR 18.16.1
Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :
Gun Metal (5202-20%)
4
19642
-
DSR 18.17.1
Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585
20 mm nominal internal dia gun metal globe valve & nozzle.
Drum and brackets for fixing the equipmets on wall.
Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.
30 m (8675-20%)
2
16378
-
DSR 18.18.1
Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required : Gun metal (2416-20%)
2
4561
-
DSR 18.19.1
Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : 2 way-100 mm dia M.S. Pipe (6742-20%)
1
6364
-
DSR 18.20
Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required. (18244-20%)
1
17222
-
DSR 18.22
Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required. (1546-20%)
3
4378
-
DSR 18.23.1
Providing & fixing flow switch in following sizes M.S. pipe including connection etc as required. 100 mm dia (7514-20%)
3
20996
-
N.S. Item
STRUCTURAL WORKS (PRE ENGINEERED BUILDING) Fabrication, supply and erection of pre-engineered building for Construction of multistory Building work such as columns,
rafters, beams, purlins, steel sheets, roof decking complete as specified in drawings as per the Fabrication drawings approved by consultant complete in all respects to the satisfaction of Achitect / EIC. Structure work includes All forging, pressing, reducing to required size shape and figure, drilling, tapping, punching, counter sinking for screws, grinding etc., and every type of work that may be necessary to fabricate, finish, erect & fix in position all steel work in good, substantial & perfect manner.
66493.8
9648250
-
N.S. Item
The main members to be conforming to IS-1732 & IS-2062 / relevant IS codes and maintaining the required aesthetics in complete. The surface to be finished with Steel Guard coat prior to application of two coats of enamel paint as per approved colour of Asian Paints. All welding/bolting/riveting as required. Necessary hoisting equipment, temporary supports, scaffolds, bracings, connections, required for fabrication and erection including removing same after fixing steel work in final position as per drawings.Unloading / loading charges, Cranes if required, necessary temporary structures for erections, necessary permits, safety measures to be in the included in the quoted rates. It also includes all necessary labours, materials as specified in item description, tools, plants, welding machines, grinding and muffing tools, working at all heights, necessary scaffolding, staging etc complete in all respects
Supplying and application of Fire proof paint Fire Film A5 to achieve the minimum 120 min fire rating in accordance with BS-476-part 6 & 7 and it shall be provided in min two layers with min DFT 250 micron.
738.82
1377456
-
N.S. Item
Supplying, fabricating of 50mm thick Continuous Sandwich (PUF) Panels with facility of customized Length, Puff Type PUR, Both side of panel elements are made up of 0.5 mm thick hot deep galvanized and pre-painted steel sheets of 240 Mpa. The color coating should be of approved color at least 25 micron polyester on 150 gms / m2 of Zinc coating with guard Film. The steel sheets should have formed grooves to provide extra strength as well as to enhance the appearance of cladding. The panel should be manufactured by pressure injection of CFC free Poly urethane foam at 40 + 2 Kg/m3 density, in between the outer and inner steel sheet surfaces. The panels either be complete with tongue and groove joint together or Cam Lock joint with flushing.
581.68
1757138
-
N.S. Item
Supply and erection of Single phase copper wound Automatic voltage stablizer of suitable capacity electronically controlled circuit with input voltage 140-260 volts single phase AC supply and output voltage 220 ± 5% volts single phase AC supply having main silicon core copper wound step up transformer with suitable nos. of turns on primary side and secondary side the transformer should be fully insulated inside the MS sheet box of suitable size. There should be power control relay and single pole MCB (C-curve, 10kA) of suitable capacity complete with internal copper wiring along with amp. meter and volt meter, high voltage cut off 280 volt input (240 volt output) and 90 volt maximum boost and overloading protection to be provided:-
Automatic Voltage Stablizer 2 KVA
2
11682
-
N.S. Item
S/E of Potable water purication system with inbuilt drinking water cooler 80 ltr. capacity (UV water purification technology), fully stainless steel body made up of Stainless Steel SS 304, Conformity to Standard for Ultraviolet system IS 14724 (latest) for water purication system with Ultraviolet disinfection, single phase floor mounted Fully automatic with auto cut off, 80lt. water storage tank capacity up to float valve level (in liter), 80ltr. Filteration water capacity in liter/ hour i njcluding connections & testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.
2
124230
-
N.S. Item
Planning, designing, constructing, Installing, Testing, commissioning of 10 KLD Sewage treatment Plant based on MBBR technology plant including all Civil, Electrical, Mechanical, piping and instrumentation works complete in all respect with operation and maintenance for 12 months during defect liability period
1
236000
-
N.S. Item
Supply of IP20 Recessed LED 600x600mm with only 35mm width fitting made of CRCA with PS diffuser. Fixture should have minimum efficacy at System level (Not Chip Level) =120lumens/watt and a minimum system lumen output of 4200 lumens and maximum system wattage of 36W. Luminaire should have Life of 50000hrs@L70B50 Lumen maintenance, CCT up to 6500K (SDCM5), THD10% at full load, ripple 5%, CRI 80, PF 0.95 and an operating Voltage Range of 140 - 270 Internal Surge Protection 4KV. Luminaire should have SDCM5. The fixture should comply with the parameters as per IS10322. The LED driver should comply to IEC61000-3-2 ed.3.2, 2009 for Harmonics, IEC61347 -2 - 13, 2006 in Conjunction with IEC61347-1 ed.2.0, 2007 for Electrical Safety, IEC62384 ed.1.1, 2011 for performance and IEC61547 ed.2.0, 2009, CISPR-15 for EMI. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Similar to Philips Models RC380B G6 LED42S or equivalent in LT/Trilux
18
122193
-
N.S. Item
Supply of suitable for general lighting recessed downlighter with 40mm height suitable for general lighting. Luminaire should have die cast heat sink with polycarbonate diffuser. The luminaire should have CRI 80 and CCT of 6500K. The luminaire shall be compliant with IP20 classification.The fixture should have a minimum system efficacy of 110 lumen/Watt and a minimum system lumen output of 1500 lumens and maximum system wattage of 13.5 Watts. The luminaire shall be designed so as to ensure lumen depreciation of up to 30% over 50k burning hours @ design ambient temp 45 deg C. The electronic driver used shall have a power factor 0.95 , THD 10%. The fixture should comply with the parameters as per IS10322. The LED driver should comply to IEC61000-3-2 ed.3.2, 2009 for Harmonics, IEC61347 -2 -13, 2006 in Conjunction with IEC61347-1 ed.2.0, 2007 for Electrical Safety, IEC62384 ed.1.1, 2011 for performance and IEC61547 ed.2.0, 2009, CISPR- 15 for EMI. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Including 3 core 2.5 sq.mm FRLS PVC insulated and PVC sheathed copper conductor cable and earthing etc. upto suitable point complete as required. (PHILIPS : Green Perform DN296B LED15S PSU WH OR APPROVED EQUIVALENT in Regent/LT)
45
146025
-
N.S. Item
Supply of high-quality integrated LED Flood Light with a minimum system lumen of 38300 Lm and system wattage not exceeding 303W with a nominal efficiency 125 lumen/watt. CCT of 5700K with SDCM of 5 and CRI : 70. The housing should be of non-corrosive high-pressure single piece die-cast aluminum to with stand extreme environments. It should have corrosion resistant powder coating to pass NSS of 500 Hrs. with PF 0.95. Lifetime of 50K hours @L70 & 78000hrs as per LM80 report at 55deg C. Product should be suitable for continuous operation (10-12 Hrs. per day). The Ingress protection should be minimum IP 66 with an IK rating of 08. Optical and control gear compartments shall be maintainable/ replaceable without impacting the LED units. The access to the optical and the gear compartment should be separate. While accessing the gear compartment, the optical compartment should not be accessible. The Luminaire should have a 20 KV /10 KA SPD duly bolted in the Luminaire and 4KV internal surge protection. The SPD should be able to sustain a minimum 15 hits of 10KA rating i.e. Total of 45 hits across all the three modes as per IEEE 62.41.2. The Luminaire should have a breather to ensure that air balance inside and outside of the Compartment The luminaire should be of Class B Serviceability. The wattage of each LED should be greater than 1 watt and less than 4 Watt. Only high power Single white LED chip with ceramic based suitable for outdoor use is allowed. Multi Chip , array multi die , mid power ,Integrated arrays and COB’s are not permitted. The LED used in the luminaire shall be SMD type only of make LGIT, Lumileds, Osram, Nichia, and CREE & no other make. The luminaire should be capable of withstanding voltage stress of 440V for 8 Hrs., should have an auto shutdown @ 325V and have an auto recovery feature. The Drivers should be a potted driver not a printed circuit board without casing, mounted inside the luminaire and it should be of same make. The Dimension of the luminaires should be minimum 538 x 100 x418 mm and have a breather ensuring a stable optical and thermal management. The weight of the luminaire should not be more than 12 Kg. Similar to Philips BVP485 LED383 or equivalent in LT/Disano
8
594720
-
N.S. Item
Supplying of LED bay light fittingof 105W having System Efficacy 130 lm/W, wide beam of 110deg, system output of more than 13500 Lumens for 105W, SDCM5, THD 10%, Power Factor 0.95, CRI 80, CCT 6500K, 110deg beam angle, Full IP 66, IK 08 protected single piece die cast aluminium housing having integrated PC lens cover with tempered glass cover of high transmittance, Life L70B50 @ 50k hrs at Ta=+45deg C with operating temperature ranging from -10degC to +45deg C. Range of input voltage should be 140-270V AC. BIS compliant driver, Driver shall have 4KV Surge protection. The luminaire should be capable of withstanding voltage stress of 440V for 8 Hrs., should have an auto shutdown @ 325V and have an auto recovery feature. Fixture including driver should have a weight of 4kg only. Similar to Philips BY225P LED135S or equivalent in LT/Trilux
20
365516
-
N.S. Item
Supply of Recess Mounted Circular form COB LED Downlighter with eye comfort feature i.e. UGR19, made of pressure die cast aluminum housing with high efficiency multi faceted surface aluminum reflector, LED Used shall be COB type and fixture should have minimum efficacy at System level =120lumens/watt with Minimum system Lumens 1500, Life of fixture : 50000 burning Hrs. @ L70 Lumen maintenance & 54,000hrs as per LM80 resport at 55deg C, CCT of 6500K (SDCM=5), CRI Ra =80; R9 = 0 with light Beam angle of 60-65 Deg & Shielding Cut off Angle of 38Deg. PF 0.95, an operating Voltage Range of 140 - 270 VAC. Minimum Internal Surge Protection 2.5KV. Fixture cutout similar to 125mm. Fixture & LED driver should be of same make. The LED driver should comply to IEC61000-3-2 ed.3.2, 2009 for Harmonics, IEC61347 -2 -13, 2006 in Conjunction with IEC61347-1 ed.2.0, 2007 for Electrical Safety, IEC62384 ed.1.1, 2011 for performance and IEC61547 ed.2.0, 2009, IEC 60598-2-2, CISPER 15 for EMC / EMI compliance with flicker free operations ripple 5%. Luminaire manufacture shall provide LM79 report from NABL/UL accredited lab. Both the fixture and Driver to be BIS approval & proposed fixture product code to be mentioned in BIS Certificate submitted. Similar to Philips lux Space DN590B M LED15S or equivalent in Regent/Osram
45
252598
-
N.S. Item
Supply and erection of flood light fixture 500W Philips cat No. BVP485 LED637 CW NB OR of equilvalent make
8
1012912
-
N.S. Item
Supply and erection of 12m high Mast with head gear and control panel as maybe required for supporting flood light fixtures of valmont make or equivalent of bajaj / transrail.
2
590000
-
N.S. Item
Supply and erection of 25mm dia 1.5 metre long lightning GI. tube rod tapered into a point at the top with 16cmx16cmx3mm thick G.I. base plate and necessary nuts and bolts with washers.
2
1180
-
N.S. Item
Supply and eraction of following size aluminium conductor armourerd cables with double walled corrugated hdpe pipe underground including excavation including erection of the same as desired
3.5C X 300 SQ.MM
10
29500
-
N.S. Item
Supply and eraction of following size aluminium conductor armourerd cables with double walled corrugated hdpe pipe underground including excavation including erection of the same as desired
3.5C X 240 SQ.MM
60
148680
-
N.S. Item
Supply and eraction of following size aluminium conductor armourerd cables with double walled corrugated hdpe pipe underground including excavation including erection of the same as desired
3.5C X 50 SQ.MM
50
26550
-
N.S. Item
Supply and eraction of following size aluminium conductor armourerd cables with double walled corrugated hdpe pipe underground including excavation including erection of the same as desired
3.5C X 25 SQ.MM
400
118000
-
N.S. Item
Supply and eraction of following size aluminium conductor armourerd cables with double walled corrugated hdpe pipe underground including excavation including erection of the same as desired
4C X 10 SQ.MM
100
20060
-
N.S. Item
Supply and eraction of following size aluminium conductor armourerd cables with double walled corrugated hdpe pipe underground including excavation including erection of the same as desired
2C X 10 SQ.MM
100
10620
-
N.S. Item
Supply and eraction of main control panel cubical type complete with 630 Amp MCCB 50KA breaking capacity complete with necessary metering and space for No. outgoing MCCB of capacities from 63A- 400A complete including erection of the same as desired
1
295000
-
N.S. Item
Supply and eraction of Sub control panel cubical type complete with 250 Amp MCCB 36KA breaking capacity complete with necessary metering and space for 6No. outgoing MCCB of capacities from 63A- 125A complete including erection of the same as desired
1
177000
-
N.S. Item
Supplying, Installation, Testing and Commissioning of weather proof cabinet for hose fabricated out of 2 mm thickness M.S. sheet with front glass door 6mm th. having locking arrangement, suitable to accommodate external hydrant with butterfly valve, 2 nos. 15 mtr long Hose pipe, 1 no. branch pipe, mounted on wall or raised brick platform including painting the metal portion with one coat of ready mixed primer paint and two coats of synthetic enamel paint of post office red shade, sign writing etc.
Size - 900 mm wide x 600 mm high x 500 mm deep
2
8708
-
N.S. Item
Supplying & Fixing of Energy saving double side EXIT sign board (size 12" x 6" x 4") fabricated in 18 swg CRC sheet with LED and acrylic sheet both side display, well ventilated, having nominal size LED lamp, battery backup 6 hour to be installed on wall/ceiling etc. complete as required. (MAKE: BAJAJ/FGL/LEGRAND/ABB)
13
115970
-
N.S. Item
Providing and Fixing Digital Control Electrical panel Panel suitable for Three phase Fire Fighting Pump set of 900 LPM complete as per requirement with fuses, Ammeter, Selector switch for local/remote, auto / manual / off operation ON/OFF indication lamp etc., Suitable HP fully automatic Star / Delta starter with over load protection, current sencing type single phase preventor complete with all accessories and internal wiring required for automatic operation.
1
21948
-
N.S. Item
Providing and fixing of FIRE EXTINGUISHER, WATER CO2 9 Ltr IS: 15683 Stored Pressure type complete with all accessories as per Manufactures Specification. ISI Mark of approved make complete in all respect.
10
48498
-
N.S. Item
Providing and fixing FIRE EXTINGUISHER CO2 type as per IS:15683 complete with all accessories as per manufacturer's specification ISI Mark in all respect.
4.5 KG. Capacity
10
137116
-
N.S. Item
Providing and fixing of FIRE EXTINGUISHER, Mechanical Foam Type 9 ltr IS: 15683 Stored Pressure type complete with all accessories as per Manufactures Specification. ISI Mark of approved make complete in all respect.
10
48498
-
N.S. Item
Supply, erection, testing & commissioning of 1/2.7" 5MP Fixed Dome (2560×1920) progressive scan imager, 2.8 mm F2.0, Fixed lens, view 103° (H) – 76° (V) @ 5MP / 108° (H) – 60° (V) @ 4MP, Main Stream: 5MP/4MP (1 ~ 25/30fps), Sub Stream: 800x600 (1 ~ 25/30fps), Third Stream: VGA (1 ~ 25/30fps), Wide Dynamic Range (WDR) up to 120 dB, Low light performance (0.03 lux in color mode), Up to 30 m (98 ft) IR distance, depending on scene reflectance, H.265 Smart Codec video compression, Motion detection / Intrusion detection / People detection, Rugged outdoor housing with IP66 ingress protection rating and IK10 vandal resistance rating, Working temperature: -30°C ~60°C (-22°F~140°F), On board camera storage: up to 256 GB micro SD card (not included), PoE (IEEE 802.3af) or 12VDC, ONVIF profile S & G compliant, NDAA Section 889 Compliant, UL Listed. OEM Authorization should be required on lettehead along with product serial no. as approved and desired by the Engineer in-charge at site. Approved Make: Honeywell-HC30W45R3Sony, Mobiteh, Mountxross, Bosch, Axis, Pelco, Flir
2
62370
-
N.S. Item
Supply, erection, testing & commissioning of 1/2.7" 5MP Varifocal Bullet (2560×1920) progressive scan imager, 2.8 – 12 mm F1.4-F2.8, MFZ lens, Angle of view 88°~30° (H) – 65°~23° (V) @ 5MP / 93°~32° (H) – 51°~18° (V) @ 4MP, Main Stream: 5MP/4MP (1 ~ 25/30fps), Sub Stream: 800x600 (1 ~ 25/30fps), Third Stream: VGA (1 ~ 25/30fps), Wide Dynamic Range (WDR) up to 120 dB, Low light performance (0.035 lux in color mode), 50 m (165 ft) IR distance, depending on scene reflectance, H.265 Smart Codec video compression, Motion detection / Intrusion detection / People detection, Rugged outdoor housing with IP66 ingress protection rating, Working temperature: -30°C ~60°C (-22°F~140°F), On board camera storage: up to 256 GB micro SD card (not included), PoE (IEEE 802.3af) or 12VDC, ONVIF profile S & G compliant, NDAA Section 889 Compliant, UL Listed. OEM Authorization should be required on lettehead along with product serial no as approved and desired by the Engineer in-charge at site. Make: Honeywell-HC30WB5R2,Sony, Mobiteh, , Mountxross, Bosch, Axis, Pelco, Flir
6
202113
-
N.S. Item
Supply, erection, testing & commissioning of PoE Spliliter12 v 1 Amp, IP66 For High Voltage Protection complete in all respects as approved and desired by the Engineer in-charge at site. Make: Honeywell, Sony, Mobiteh, , Mountxross, Bosch, Axis, Pelco, Flir
8
14745
-
N.S. Item
Supply, erection, testing & commissioning of Recording / Management Server - Suitable Network Video Recorder & Management System with required Licenses for all of the above mentioned Complied Cameras complete with all necessary required software's, Hardware's, Storage, Accessories, Civil, Electrical works & peripheral items required as per specifications & at site of work inline with the engineer in charge instructions. The system proposed should have minimum usable 30 days recording suitable Hard Disk as per requirement with 320MBPS throughput. Certifications Hard Disk Complete in all respect upto entire Satisfaction Engineer in charge of works. IP Camera Input upto 32 Channel and 4 SATA of 8 TB each With RAID 1/5. Certifications: ONVIF Profile S Compliant, UL, CE, EN, FCC & RoHS Compliant as approved and desired by the Engineer in-charge at site. Make : HP, Dell, Honeywell, IBM, Camera OEM
1
244563
-
N.S. Item
Supply, erection, testing & commissioning of Access Switch 8 10/100/1000BASE-T PoE and 2 100/1000 Mbps SFP ports,IEEE 802.3az Energy Efficient Ethernet (EEE),IEEE 802.3x Flow Control,IEEE 802.3af/at compliance (for PoE ports),130W POE Budget ,9K Jumbo frame,256 Multicast Groups,802.1W RSTP,802.1s MSTP,IGMP Snooping,Loopback Detection,802.3ad Link Aggregation,Auto Surveillance VLAN,802.1p Quality of Service with 4 queues per port,Supports 2 IP interfaces,Min 50 static route entries,Min 300 ACL Rules,SSH,TLS,DoS attack prevention,802.1X Port-based Access Control,Port Security,Cable diagnostics,Dual image,Dual configuration, NMS Bundled along with Switch,OEM Should be present in Gartner Magic Quadrant from past 5 Years.OEM Authorization should be required on lettehead along with product serial no. as approved and desired by the Engineer in-charge at site. Make :Cisco, Extreme, D-Link, Juniper, Mountxross, Netgear
1
44310
-
N.S. Item
Supply, erection, testing & commissioning of 24 port POE switch IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T Gigabit Ethernet, 802.3ae 10 GbE, IEEE 802.3x Flow Control for Full-Duplex Mode, Auto-negotiation,24 10/100/1000 Mbps PoE capable, 2 Gigabit SFP, 2 10GSFP+,Full/half duplex for 10/100 Mbps and Gigabit speed,Auto or configurable MDI/ MDIX, Switching Capacity 92 Gbps,Transmission Method Store-and-forward,MAC Address Table 16,000 entries per device, Maximum 64 bytes PacketForwarding Rate 68.45 Mpps,PoE Standard IEEE 802.3af, 802.3at,Ports 1 to 24: Up to 30 W,PoE Power Budget Max. 193 W,Heat Dissipation 813.967 BTU/hr,Diagnostic LEDs Power/Stacking ID/Fan (per device), Link/Activity/Speed (per 10/100/1000 Mbps port), Link/ Activity/Speed (per Gigabit SFP port), Link/Activity/Speed (per 10G SFP+ port),L3 Features ARP• 256 Static ARP• Supports Gratuitous ARP• IPv6 Neighbour Discovery (ND)• Default Routing• Static Routing• 64 IPv4 Static Route Entries• 32 IPv6 Static Route Entries,• CLI• Telnet Server• TFTP Client• IPv6 Neighbor Discovery• Configurable MDI/MDIX• SNMP• Supports v1, v2c, v3• SNMP Trap• System Log• Max. 10,000 log entries• DHCP Client• D-Link Network Assistant support• SNTP• ICMPv6• IPv4/v6 Dual Stack• DHCP Auto Configuration• RMON v1 complete in all respects as approved and desired by the Engineer in-charge at site. Make :Cisco, Extreme, D-Link, Juniper, Mountxross, Netgear
1
56391
-
N.S. Item
Supply & erection of wall mount 9U rack, front glass door (tinted, toughened) with lock & key, 2 pairs of 19" mounting rails with U-marking, welded side walls with metal logo, 1U cable manager (1), hardware packet (1 Pkt), 6 socket 5 amp. power distribution unit (1 No.), roof mounted fan unit /90 CFM /230V AC (1 No.) complete in all respect as approved and desired by the Engineer in-charge at site. Make: DLink, Netrack, Mountxross
1
10558
-
N.S. Item
Supply, erection, testing & commissioning of HDD Formatted capacity 6 TB Gold, data transfer rate (max sustained) 262mb/s, performance class 7200 RPM class, average power requirements (W) 9.2W, Idle 8.0W, Environmental operating temperature 5 degree C - 60 degree C, Non-operating temperature -40 degree c to 70 degree C, Shoch read write operating ( half-sine wave, 2ms) 70G/50G, Non operating ( half-sine wave, 2ms) 250G, Acoustics average idle mode 34DBA, Seek mode 38DBA, Physical Dimensions, Height maximum 26.1mm, Length maximum 147.0mm, width 101.6mm, as approved and desired by the Engineer in-charge at site. Make: WD, Toshiba
1
27311
-
N.S. Item
Supply, erection, testing & commissioning of 55 Inch Professional Display Diagonal Size 55 Panel Type Edge LED BLU Resolution UHD (3840 x 2160) Panel Technology VA Brightness 500nit Contrast Ratio 4000:1 Viewing Angle(H/V) 178:178 Response Time 8ms Display Colors 1.07 Billion Color Gamut 72% Dynamic C/R MEGA Audio Built in Speaker (10W + 10W) INPUT Type DVI-D,HDMI 2.0 X 2, USB 2.0 x 1 , Audio Input X 1 OUTPUT Type Stereo Mini Jack, HDMI X 1 Duty Cycle 24 x 7 Speacial features Anti Glare/Haze 25%, Temperature Sensor,Pivot Display, IP5x Rating, Wireless Mirrioring, 8GB internal memory Logo Should have Customized Logo when no signal is active File support Direct vieweing of PPT, Word ,PDF, Images and video from pen drive Remote Controlling of device Laptop / Desktop Should be contolled remotely by external Keyboard and mouse through display EXTERNAL CONTROL RS232C(in) thru stereo jack, RJ45, IR Power Consumpstion 130 Standby Mode Power less than 0.5W VESA Mount 200*200mm Operating Temperature 0℃~ 40℃ Humidity 10~80% Certificates BIS, CE, FCC, UL& OHSAHDiagonal Size 55" LFD Full Smart for Viewing camera complete in all respects as approved and desired by the Engineer in-charge at site. Make: Samsung, Sony, LG, Toshiba, Hitachi, Panasonic, Lloyd
1
110619
-
N.S. Item
Supply & erection of 6 Mtr HDMI Cable for NVR, UL Listed complete in all respects as approved and desired by the Engineer in-charge at site. Make: Honeywell/ W Box, Mountxross, Beldon
1
2209
-
N.S. Item
Supply & erection of Cat 6 Cable in existing conduit Category 6 Unshielded Twisted Pair 23 AWG:305mtr. ,4 pair 100W cable shall be compliant with ANSI/TIA/EIA-568-C.2 Additional Transmission Performance Specifications for 4-pair 100W Category 6Cabling. Tested upto 600 MHZ; Construction: 4 twisted pairs separated by internal X shaped, 4 channel, polymer spine / full separator. Half shall not be accepted.Sheath : FRPVC/LSZH,Outer Diameter 6.1 mm nominal;Temperature Range -20° to +60°C.Manufacturer should have ISO 9001:2008 Certification for Quality Management System.Manufacturer should have ISO 14001:2004 Certification for Environmental Management System.All UTP and Its Components should be from same OEM(Systemax, AMP, D-Link, R&M, Commrax).complete in all respects as approved and desired by the Engineer in-charge at site. Make: Systemax, AMP, D-Link, R&M, Commrax
400
26920
-
N.S. Item
Supply, erection, testing & commissioning of 1 KVA UPS with input power factor 0.99, output power factor 0.8, OVCD inbuilt, DC V 36v, efficiency above 90% complete in all respects as approved and desired by the Engineer in-charge at site. Make: Eaton, APC, Emerson
1
18336
-
N.S. Item
Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-
Heavy Gauge PVC Conduit Pipe 25mm dia. (Flushed)
300
16980
-
N.S. Item
Providing wrestling mat with cover as per specification approved by FILA (International Wrestling Federation)/ WFI (National Wrestling Federation) :- 1) Each Mat size - 2 mtr. X 1 mtr. x 70 mm (07 cm)
2) Size of FOP - 12 mtr x 12 mtr (72 pieces)
3) Thickness - 70 mm (07 cm)
4) Shall be made of high density EVA close-cell foam, good anti-slippery pattern top for anti-slip purpose.
5) Colour – Blue as approved by FILA/WFI.
6) Density - 50-55/Kg Qubik Mtr.
7) Hardness - 5-8 Degre Shore A.
8) Wrestling Mat Cover- Non-slip, easy to clean and water resistant, duly marked as per FILA / WFI rules.
252
1427328
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements