Department Of Atomic Energy Tender

Apron Cabinet with Shutter & Drawer: 750 mm x 500 mm x 2100 mm (W x D x H) Class VIII Galvanized Plain Skin Pass (GPSP) steel with 80 to 100 micron epoxy Powder Coating Adjustable Metal Shelves with shutter and 2 drawers (MOC : Class VIII Galvanized Plain Skin Pass (GPSP) steel with 80 to 100 micron epoxy Powder Coating)

Solvent Cabinet - 45 Gallon (170L) 1092 mm x 457 mm x 1651 mm (W x D x H) Cabinet: Manual Closing Double Door with 2 Shelves. Made of 18 gauges (1mm) Double Wall Steel with 38 mm of Insulating Air Space. Fully Welded Constructions with continuous Piano Hinjus fitted with dual Vents with Built-in Flame Arrester. Cabinet is provide with 2" Height Liquid tight Containment Sump to hold any leakages- Adjustable Shelves Provisions- Manual Close Doors (when pushed closed- doors will automatically self-latch) with Flush Paddle Handle with Slip Resistant Grip with provision for double key set (one keyed lock). Fully powder coated- Durable & Chemical Resistant Cabinet with High Reflective Band.

Sitting Height Work Bench: 2000 mm x 750 mm x 750 mm (W x D x H) Class VIII Galvanized Plain Skin Pass (GPSP) steel with 80 to 100 micron epoxy Powder Coating (20 ± 1) mm Thick Black Granite Worktop Sitting Height Under Bench Cabinets Door + Drawer 600 mm - 2 No's. 750 mm Leg Space with openable panel - 1 No's. Service Drop - 1 No's Electrical Race Way with 2 nos. 6 Module Plate (2 switch & 2 sockets) & 2 nos. data points Back Granite Supports Filler Panels (MOC : Class VIII GPSP steel with 80 to 100 micron epoxy Powder coating ) to fill all the panels of work bench 2 x 6/16 Amps (6 Module) Switch Sockets - 2 No's. PVC Skirting wherever required with corner support

Spot Extractor with Ceiling Mount Bracket: Spot Extractor with Dome of 375 mm diameter, with tube of diameter of 75 mm made up of PP. Color - White Air flow : 80 -180 m3/h Joint: high grade PP, to be 360° swivelled, dismantled & assembled easy for cleaning Joint seal ring: High-density anti-aging rubber Support spring/centre bolt: stainless steel 304 Adjustable joint knob: high grade PP with a molded-in nut locking with centre bolt Air flow control valve: adjust the external valve knob manually to control the entering of the gas flow Rigid Flexible Duct: D75mm PVC/PP Bracket: high grade PP (ceiling/wall mounted)

5' Bench Top Fume Hood (Auto Sash): 1500 mm x 950 mm x 2300 mm (W x D x H) Class VIII Galvanized Plain Skin Pass (GPSP) steel with 80 to 100 micron epoxy Powder Coating Phenolic Resin lined, electron beam cured, SEFA 3 certified Liner. Literature required in Technical Bid 6 mm Tampered Safety Glass for Sash Standard Base Cabinets with PP liners and exhaust provision - 2 No’s Dished Granite Work Top 18mm with finishing 3 Modular Cover frame with 6/16 A Switch & Sockets - 6 No’s with Junction Box Remote Control Valves - 3 No's. PP Cup Sink - 1 No Bottle Trap - 1 No Airflow Monitor Sensor, RJ12 Cable and 15vdc power supply; Alarm Range 0.15 - 2.00 m/s (30-400fpm) remote SM7 or ILS Airflow sensor Accuracy - Face Velocity +/-5% Airflow Sensor - Remote SM7 / ILS (In-line Sensor) Pushbuttons - Three Configurable pushbuttons Digital Output - Three Configurable outputs Digital Input - Three Configurable inputs Com Port - RS485 com port Modbus RTU and BACnet Display - Digital velocity display m/sec Graphical display (Green / Safe, Amber / Caution, Red / Alarm) Alarm Indication - Red graphic with Audible alarm Mounting - Semi flush Light Fixtures - 2 Nos. Service Hatches for cable entry on both posts Fume Hood Furring panel (MOC : Class VIII GPSP steel with 80 to 100 micron epoxy Powder coating ) Filler Panels (MOC : Class VIII GPSP steel with 80 to 100 micron epoxy Powder coating ) Pure Epoxy Scaffolding for 5' Hood In built fire extinguisher Temperature indicator& pH meter Smart sash (door) (sensor based) opening and closing detecting person presence

Standing Height Work Bench with Sink Unit 950 mm x 750 mm x 900 mm (W x D x H) Class VIII GPSP steel with 80 to 100 micron epoxy Powder coating (20 ± 1) mm Thick Black Granite Worktop Granite Skirting 2 inch Standing Height Sink Cabinets - 900mm -1 No's. PP Sink - 1 No's One Way Water Faucet with Necessary Hardware PP Bottle Trap for Drain & Sink Outlet Nipple & PP Hose Pipe with Coupler PVC Dual Eye Washer with Pipe Peg Board SS 316 Service Drop - 1 No's Back Granite Supports PVC Skirting wherever required with corner protector Filler Panels (MOC : Class VIII GPSP steel with 80 to 100 micron epoxy Powder coating ) to fill all the panels of work bench Gable Leg (MOC : Class VIII GPSP steel with 80 to 100 micron epoxy Powder coating) Finished Back Panel (MOC : Class VIII GPSP steel with 80 to 100 micron epoxy Powder coating)

Standing Height Island Work Bench with Reagent Racks: 5300 mm x 1500 mm x 900 mm (W x D x H) Class VIII GPSP steel with 80 to 100 micron epoxy Powder coating (20 ± 1) mm Thick Black Granite Worktop Standing Height Under Bench Cabinets Door + Drawer 750 mm -10 No's. 750 mm Leg Space with openable panel - 4 No's. Island Middle Frame Island bench End Close Panel Service Drop - 1 No's Electrical Race Way with 10 nos. 6 Module Plate (2 switch & 2 sockets) & 4 nos. data points PVC Skirting with corner protector 2 x 6/16 Amp (6 Modules) Swtich sockets - 8 Nos. Double Sided 2 Tier Reagent Rack with 300mm Depth. (MOC : Class VIII GPSP steel with 80 to 100 micron epoxy Powder coating )

Sitting Height Work Bench: 5699 mm x 900 mm x 750 mm (W x D x H) Class VIII GPSP steel with 80 to 100 micron epoxy Powder coating (20 ± 1) mm Thick Black Granite Worktop Sitting Height Under Bench Cabinets Door + Drawer 600 mm -2 No's. 750 mm Leg Space with openable panel - 1 No's. Back Granite Supports Service Drop - 1 No's Electrical Race Way with 10 nos. 6 Module Plate (2 switch & 2 sockets) & 4 nos. data points PVC Skirting with corner protector 2 x 6/16 Amp (6 Modules) Switch sockets - 8 Nos. Filler Panels; MOC : Class VIII GPSP steel with 80 to 100 micron epoxy Powder coating to fill the panel of work bench.

"L Shape" Table with Return Storage: (1500+750) mm x 900 mm x 750 mm (W x D x H) Table Top: 25 MM thick. Prelaminated Particle Board with 2MM PVC Edge band on all side. Table top at 750MM height from floor level. Cut-out provision for Access flap as required. Understructure: C type Legs - Verticals Made up of 50x50x1.6 MM thick & Horizontal Connecting member made up of 40 mm x 40 mm MS pipe finished in Powder coating. Cross members made up of 40 mm x 40 mm MS Section finished in Powder coating are connected to Legs with Brackets for table support. Wire Management : Powder coated Switch mounting box below table top. Provision of vertical duct to take out cable from floor to box. Modesty: Metal modesty panel with laser-cut embellishments made up of 1.5MM thick CRCA finished in Powder coating Access FLAP 450 mm Length: Special Aluminium access flap SIDE CREDENZA : 2 Drawers & 1 Filling Drawer With 2 Openable Shutter finish in 25 / 18 MM thk. Prelaminated PB Board 2MM PVC Edge band to all Exposed Area & Metal Drawer with Centralized Lock & Finger groove handles. ( SIZE : 1200 X 450 X 750 MM HT. )

Wall Mounted Storage Cabinets: 900 mm x 350 mm x 600 mm (W x D x H) Class VIII Galvanized Plain Skin Pass (GPSP) steel with 80 to 100 micron epoxy Powder Coating Adjustable Metal Shelves (MOC : Class VIII Galvanized Plain Skin Pass (GPSP) steel with 80 to 100 micron epoxy Powder Coating) - 3 Nos. Hinged 4 mm Glass Door

Wall Mounted Storage Cabinets: 750 mm x 350 mm x 600 mm (W x D x H) Class VIII Galvanized Plain Skin Pass (GPSP) steel with 80 to 100 micron epoxy Powder Coating Adjustable Metal Shelves (MOC : Class VIII Galvanized Plain Skin Pass (GPSP) steel with 80 to 100 micron epoxy Powder Coating) - 3 Nos. Hinged 4 mm Glass Door

Lab Incharge Chair: Back : Medium Back Chair Arms : 1 D PU Arm Mechanism: SYNCRO 1P Locking Mechanism Castors: 60MM NY Castor Base: 660MM Nylon Base Seat Finish : Fabric Finish Seat Back : Mesh Back Lumber Support : Yes

Visitor's chair: Arms : 1 D PP Arm Mechanism: SYNCRO 1P Locking Mechanism Castors: 60MM NY Castor Base: 640MM Nylon Base Seat Finish : Fabric Finish Seat

PP FRP Exhaust System & Accessories: Design, Supply, Installation / Erection, Testing, Balancing, Commissioning and preparation of handing over documents of PP-FRP ducting with glass lined (GL) finish. FRP lining shall be of fire resistant Isophthalic resin. Duct pricing shall be inclusive of all necessary accessories like - flanges, bends, entry branches, tapers, inspection door, gaskets for flanges, GI bolt & nuts, washers, support angle, hanger threaded rods with anchor bolts for fixing in roof / wall. Rate shall be inclusive of 2 coats of enamel painting for duct surface. Mode of measurement shall be in sq mtr, measured as circumference of duct outer surface x running length. Extra will not be paid for accessories such as flanges, bends, elbows, Y piece, branch off, reducer, entry doors, inspection doors, gaskets, Radium Sticker showing blower number, scrubber number, airflow directions & future provision on the duct surface etc. The ducting rate quoted shall be inclusive of minor civil works for duct entry in the existing service shaft & terrace floor. 3mm PP + 2mm FRP Ducting with Necessary Installation Hardware and reducers for complete installation

50 mm Diameter PP Damper for Fume Hood Base Cabinets

100 mm Diameter PP Damper for Acid / Exhaust Storage Cabinets

100 mm Diameter PP Damper for Spot Extractors

300 mm Diameter PP Damper for Fume hoods

100 mm Diameter Flexible Hose with Clamps for Spot Extractor, Acid/Exhaust Cabinets

50 mm Diameter Flexible Hose with Clamps for Fume Hood Base Cabinets

300 mm Flexible Hose with Clamps For Fume Hoods

PP FRP EXHAUST * Cluster : 1700 CFM * 6 inch WG Static pressure * Centrifugal type with Flame Proof Motors * FRP Impeller with vibration isolator Supply, installation, testing and commissioning of low noise level SISW centrifugal PP exhaust blower. The blower shall be Direct driven with high efficiency motor suitable for VFD Motor shall be TEFC Foot mounted, 3phase, 50Hz, 415Volts, IP-56 Protection, Class F & Class B Temperature rise. Mounted on common base frame for outdoor application with necessary accessories like shaft guard, slide rail, motor cover & Spring type anti vibration mounts. Electro galvanized stand / Pedestal and fasteners like bolts, nuts and washers to be provided.

Packed Wet Scrubber System with accessories: Cluster 1 : Scrubber Made of 3mm PP + 2mm FRP * 1700 CFM * Inlet & Outlet Nozzles, * Over Flow * Water Inlet * Water tube Level Indicator * Inspection Door * PP Pall Rings Packing * Mist Eliminator * Spray Nozzles * Recirculation Pump * Drain Port with Valve Supply, Installation, testing and Commissioning of scrubber Vertical type with integrated liquid tank, Material: PP/FRP, Airflow: As mentioned Below Temperature: 70 deg C (max.), Pressure drop should be below 50mm wg (approx.), Scrubber Sink consisting of PP sink of suitable Diameter & Height not less than 750mm. complete with makeup water connection with control valve, water level indicator, drain with control valve, over flow pipe, scrubber recirculation pump with Mechanical seal, inlet flange, outlet flanged connections, Ball valve with gaskets & bolt nuts , single stage PP packing rings & single stage PVC mist eliminator pad. One set of liquid spray nozzle system , Including Dosing Plug with Valve, Mounting Bolt & Nuts with Anti Vibration Pads. Scrubber Pump of suitable motor rating, 3phase 50Hz, 415Volts. Including all pump covers, Ladders, Inspection, maintenance door & other accessories. Made of 3mm PP + 2mm FRP

RO Water Line for total user points - 3 (Fume Hoods - 1 no., Sinks - 1 no. & Safety Eye Washer - 1 no.) SS 316 Pipe along with required L bends, Unions, Tee Joints, Reducing Tee Joints, Ball valves, Fittings with Nuts & Ferrules Required supporting Materials & Hard ware with Complete Installation for Fume hood - 1 No., Safety Eye Washer - 1 No. & Sink Units 1 No.. minimum length required is 50 ft

Drain Line For Lab - 2 User Points: Supply & Installation of UV stabilized & antimicrobial fusion welded multi-layer, HDPE PE 100 PN-6 pipes confirming to IS 4984 complete with necessary slope and HDPE fittings specials like collar flanges, gaskets, bolts, nuts, washers, elbows, tees, unions, reducers, reducing tees, end caps, reducing sockets, reducing elbows, collars, U traps with heat welding etc.; maximum pipe requirement is 200 ft. of size 75mm, the pipe routing will be through the wall, which shall be connected to building drain collection tank if required or to be connected to canister as per instructions of Engineer In Charge.

Glass Partitions: Supply & Installation 12 mm toughened glass (light transmission of minimum 88 %, solar factor of minimum 0.82) with aluminium partition and hardware (hardware having self-closing from 180 degree opening angle on pull side, with visual closing force indicator, closing force adjustment possible at front using a battery screw driver, as per German industrial standards (DIN) SPEC 1104 or equivalent Indian standards) with a complete installation

Framed Glass Doors with access control: Anodised Aluminium Framed Glass Door with Door Closures, Handles and required Hardware (hardware having self-closing from 180 degree opening angle on pull side, with visual closing force indicator, closing force adjustment possible at front using a battery screw driver, as per German industrial standards (DIN) SPEC 1104 or equivalent Indian standards) with a complete installation Single leaf door of size: 1000 mm x 2100 mm

Main Doors (Entry & Exit Doors): 46 mm thick doors made of 0.8 mm thick Powder Coated sheet with Honeycomb as infill, 1.2 mm thick GPSP powder coated door frames with SS ball bearing butt hinges, double glazing toughened glass 500x750mm, SS Door handle with Push plate, Non Concealed door closure (TS-68/ Equivalent), Tower bolt for the double door with complete installation Doors should be designed to serve as emergency exits, with the capability to open easily in emergency situations. Single leaf door of size: 1200 mm x 2100 mm (1 No.) Double leaf door of size: 1500 mm x 2100 mm (1 No.)

Grid False Ceiling: "Mineral Fibre Acoustical Suspended Ceiling- Tiles, with hot dipped galvanized steel grid work, surface chemically cleaned capping pre-finished in baked polyester painted Black Rebel Cilver Grid, Main Tees of size 35 (H) x 14.5 mm every 1.2 m centre to centre, stitched Cross Tee at 0.6 m centre to centre to form a grid of size 600 X 600 mm and suspending the grid from RCC roof using 3 mm GI rod, 6 mm nylon rawl plug and 6mm J bolt at every 1200 mm intervals. Mineral Fibre Acoustic Ceiling Tiles of size 600 x 600 x 16 mm OCR over the formed grid. Light Reflection of 85%. Noise Reduction Coefficient (NRC) of 0.65, Sound Attenuation of 32 db, K = 0.52-0.57 W/mk. Humidity Resistance up to 99% at 50 degree C with complete installation. rodent safety work above false ceiling in terms of plastering , grouting and /or including any ultrasonic which must take care of any rodent entry in ceiling as all electrical wiring ,plumbing and gas distribution running from ceiling to wherever required location in lab.

Vinyl (100 % virgin vinyl) homogenous 3 mm Flooring (antimicrobial and antifungal) with complete laying. Use Odor free glue, including cementations self-levelling

POP Punning of 12mm average thickness on existing walls with complete work

Painting with Putty & Primer: Preparing & finishing of 2 coats of Lustre paint of approved quality & shade by sand papering the surface, applying one coat of primer, prepare the surface with two coats of full putty, sand papering again, repeating a coat of primer, applying one coat of plastic emulsion paint, touching up with putty & applying two final roller coats of plastic emulsion paint, to internal wall/ceilings masonry concrete surfaces incl. preparing the surface by cleaning scrapping, smooth filling crevices, scaffolding etc. with complete work

Civil Works (Chipping Works, Foundations Works for Blower & Scrubber, AC's, Doors Dismantling & Closing with Brick Work, New Doors Provision in Civil Wall with Patch Works and Plastering, earthing civil works, Etc.,) as per CPWD Civil specifications 2019 Vol I and Vol II. Existing false ceiling removal with care to ensure no damage to tiles. Closing of Existing AHU Duct Holes.

AC for LABORATORY (SITC): Split Air Conditioners Hot & Cold, 2.0 Ton Capacity, Inverter Split Air Conditioner with Qty- 6 Nos 100% Copper Tubing with Copper Condenser Coil, Anti-Corrosion Shield, Equipped with the PM 2.5 Filter to provide dust free, Cleans and deodorizes the air, Voice Control with Alexa and Google Assistant, seamless hands-free operation, Wi-Fi enabled Smart Ac, Auto Convertible 3 0.Star M.S.Stand – Qty - 6 Nos Copper Pipe - 200 rmt minimum PVC Drain Pipe - As per Site Design & Requirement Casing & Capping for Drain & PVC Pipe - As per Site Design & Requirement

ELECTRICAL - SITC: 4C X 25 sq. mm copper PVC copper Armoured cable, 100 meter minimum; 4C X 16 sq. mm copper PVC copper Armoured cable, 100 meter minimum CABLE TRAY:- Supply and Installation of following size 1.6mm thick GI Perforated type cable tray with Cover Plate and coupler plates, bends, elbows, tees etc as required. The scope also includes suitable cable tray supports arrangements on walls/Ceiling/Trench with M.S. Structural steel / Threaded rods, anchor bolts, As per Standard IEC-61537, 100mm x38 mm deep Raceways - 50 rmt minimum, Providing and fixing 150 x 150 x 70 mm deep 1.6 mm thick GI sheet junction box including providing 1.6 mm thick stainless steel cover - 5 Nos. PVC CONDUITS :- a) 25 mm Diameter - 250 rmt b) 32 mm Diameter - 25 rmt c) 25 mm Diameter flexible pipe - 25 rmt LIGHT FIXTTURES :- Supply and Installation of following type LED wall/ Surface Mounted/Recessed with including all fixing accessories etc. , 42W LED (600x 600MM) BOTTAM OPENABLE LIGHT FITTING - MONOCROMATIC - 8 Nos. 36W LED (600x 600MM) LIGHT FIXTURE - 25 Nos.,20W LED BATTEN LIGHT - 4, CABINETS LED COVE LIGHTING - 20 rmt and Point Wiring for Light with 1.1KVgrade PVC insulated 3R X 1.5 sq. mm FLRS Flexible Copper conductor wire, run in and including anodised GI Switch box with modular switches and the box covered with front plate. Primary light point controlled by one 6A switch - 38 Nos., Secondary lights point - looping point - 31 Nos. POWER SOCKET Supply, erection, testing and commissioning of the following power sockets with Switch/MCB's and with Flush/wall/surface mounting with front plate , cover and fixing screws etc. complete along with labelling complete as required. 6 Amps Single phase commercial type switch within 3 modular Plate & 2 Modules Dummy Switches for the fume hood Light Control - 8 Nos. 6/16 Amps, 5-pin Single phase commercial type socket controlled by 1no.s of 6/16 Amps SP Switch- 6/16 Amps - 16 Nos., 5-pin Single phase commercial type socket controlled by 2nos. of 6/16 Amps SP Switch - 38 Nos. (2 Nos. of 6 Amps, 5-pin Single phase commercial type socket controlled by 2nos. of 6 Amps SP Switch) - 15 Nos. 1 Nos. of 20 A SP MCB with 3-pin Single phase industrial socket with box - 14 Nos. LIGHTING PRIMARY WIRING Supply and laying with the following size 1.1kV grade FRLS PVC insulated Copper conductor wire and terminated with suitable lugs complete as required. 2 runs of 2.5Sq.mm Wire and 1 run of 1.5 sq.mm copper flexible wire in existing 25 mm diameter conduit from DB to Switch Board. POWER SOCKET CABLING Supply and laying with the following size 1.1kV grade PVC insulated Copper conductor Cable and terminated with suitable lugs complete as required. 3C X 2.5 Sq.mm Cu Flexible cable in existing Cable tray From DB to power sockets.-850 Rmt 3C X 4 Sq.mm Cu Flexible cable in existing Cable tray From DB to power sockets.-450 Rmt DISTRIBUTION BOARDS Supply, Installation, Testing and commissioning of TPN Vertical/ Horizontal MCCB/MCB Distribution boards dust and vermin protected and rated for 415V Three Phase AC supply operation including incoming MCB as per specifications and required capacity MCB's shall conform to IS: 8828 4 Way VTPN DB(Vertical type)with 100A FP MCCB as incomer and 2 No’s 63A 10KA C Curve TP MCB & 3 Nos 32A 10KA C Curve SP MCB as outgoings for UPS Main outgoing DB-1 No 4 Way VTPN DB (Vertical type) with 63A FP MCB as incomer and 3 Nos 40A 10KA C Curve TP MCB & 3 No’s 32A 10KA C Curve SP MCB as outgoings for UPS Main outgoing DB-1 No 6way ETPN DD DB with 01 no of 63A FP MCB as incomer and 12 No’s of 6-32A SP MCB as outgoings as one set for UPS and RPDB-1 12way ETPN DD DB with 01 no of 63A FP MCB as incommer and 27 no's of 6-32A SP MCB as outgoings as one set for RPDB 8 way SPN DD DB with 01 no of 32A DP MCB as incommer and 5 no's of 6-32A SP MCB as outgoings as one set for Lighting DB-1 No; 4 Pole 63A RCB Providing and Fixing maintenance free earthing which consists of CI Pipe Earth station at 2500mm Depth including construction of brick pedestal, providing meshed funnel, GI cover and other civil Engineering works, spreading a homogenous mixture of salt, charcoal around the pipe etc., completely as per IS 3043, 1987 or latest revision. Supply and laying of following earth strips/ conductors. Supply and fixing of 25 x 6 MM GI Flat - 70 RMT Supply and fixing of 25 x 3 MM GI Flat - 120 RMT Supply and fixing of 10 sq. mm Earth Green Wire - 30 RMT Supply and fixing of 4 sq.mm Earth Green Wire - 100 RMT SAFETY ITEMS:- Supply, Installation, Testing and commissioning of the Following Safety and Fire- fighting accessories as per standards and specification Rubber Mats 415 V, 2 m x 1 m-1 No Shock treatment Chart with wooden frame and glass-1 No Installation as per IS - 732 (1989) Standards

SMOKE DETECTION & FIRE ALARM SYSTEM: Single Loop Intelligent Fire Alarm Control Panel with Battery Backup With required conventional Smoke Detectors Manual Call Point Red Mini Horn, Red, UL certified, India Metal Plate Response Indicators for above False ceiling detectors 2core x 1.5 sq. mm Copper armoured FRLS cable Control Module / Monitor Module Fire Extinguisher ( CO2 & ABC Floor Mounted ) & Signage’s FIRE ALARM SYSTEM:- Supply, Installation, Testing and Commissioning of CONVENTIONAL e fire alarm control panel with built in ZONE cards. FACP shall have capacity to look upto minimum of198 devices per loop i.e.22 detectors & 22 modules, FACP shall have 2 x 10 character LCD alphanumeric display with backlight, fully (100%) programmable disablement. Test, sounder fault, delayed mode, relays disabled, earth fault, system/CPU fault, sounder disabled. Alarm silenced, supply fault, power etc.- Supply, installation, testing & commissioning of CONVENTIONAL Photoelectric type Smoke detectors with detector mounting base & required accessories. Included Junction box for above ceiling Supply, installation, testing & commissioning of Analogue Addressable Photoelectric type Smoke detectors with detector mounting base & required accessories. Included Junction - below false ceiling Supply, installation, testing & commissioning of Response Indicators for the Above ceiling detectors with required accessories and mountings Supply, installation, testing & commissioning of Manual Call Points (Break Glass Type / Pull Station Type) The same shall be made of ABS plastic, square in shape Surface / Flush Mounting with mounting base & required accessories. It shall have a "Break glass" message embedded on the glass (In case of break glass type MCP). The addressable module shall be enclosed along with the break glass in a junction box. "Supply, installation, testing & commissioning of Ceiling mounted Hooter/Sounder cum Strobe / Flasher. The Hooter/Sounder shall be made of ABS plastic material & have the Db level of 90 dBs and a multi tone facility, complete with mounting base & required accessories. The addressable module shall be enclosed / fitted in a junction box. Supply and laying of 2C x 1.5 Sq.mm, Multi stranded Copper, FRLS Armoured cable laid on surface with GI saddle-spacers every 0.4 meters. Complete with GI Junction Box, lugs, cable compression glands, cable tags, ferruling and end termination. (Red in Colour)

ACCESS CONTROL SYSTEM FOR 4 DOORS: Supply, Installation, Testing and Commissioning of RS485 based 4 Readers Access Controller (Reader Module), power supply unit, TCP IP connectivity with tamper detection provision as per the tender specifications. Cost shall including enclosure for controller and power supply unit for controller (power supply unit shall inclusive of battery backup with exhaust fan). Supply, installation, testing & commissioning of RFID readers along with 5mm mullion spacer plate / wall switch adapter plate with 2.5mm thick SS front plate as per specification Supply, installation, testing and commissioning of Proximity Access Cards (1 Nos.) With Lanyard to hold the cards as per specification. Supply, Installation, Testing and Commissioning of Electromagnetic Lock with required mounting brackets for single door as per the tender specifications Supply, Installation, Testing and Commissioning of surface / flush mounted (as required at site) Magnetic Contact (Door position sensor) for access controlled doors as per the tender specifications - 4 Nos. Supply, Installation, Testing and Commissioning of exit switch & accessories with 2.5 mm thick SS front plate as per specification suitable for mounting on metal surface/metal frames or wooden frames wall or as required based on site conditions including all accessories. - 2 Nos. Supply, Installation, Testing and Commissioning of the Security Management Server software and also provide Integrated Access Management 1 Master Software for Access Control & Time & attendance software with alarm monitoring as per the tender specifications - 1 set Supply and laying of 8 core x 1 Sq mm Un Armoured Shielded FRLS, Multi-standed Copper Conductor, PVC sheathed Cable for connecting controller to readers as per the tender specifications. Supply and laying of 2 core x 1 Sq mm Un Armoured Shielded FRLS, Multistanded Copper Conductor, PVC sheathed Cable. Supply and laying of MS Powder coated Trunking 300 x 50 mm x 2mm with cover & fixing supports etc. as required Supply and laying of 1" - 2 mm thick FRLS - PVC Conduits, JB's in wall, columns, ceiling etc., including associated civil works. - For ACS cabling from controller to Readers, BGU,EM Lock …etc. Conduit colour shall be in BLUE COLOR

CAMERA AND DISPLAY UNIT ON ISLAND BENCH FOR DEMONSTRATION: Island Bench Camera - 4 No’s Connectivity Technology: Infrared Color: Black Special Feature: Infrared, Low Light Screen Size: 2.7 Inches Optical Zoom: 100X Minimum Focal Length 1 Millimetres Included Components: Ultra HD Pro Webcam, USB 3.0 cable (compatible with USB 2.0), Removable clip, Privacy shade, Carrying pouch, Video Capture Resolution 4K; Wall Mount Adjustable arm and swivel ball help position devices at different Irregular surface. Island Bench Display Unit - 4 No’s Dimensions : 7 x 4.6 x 0.9 inches Weight : 400 g Screen Size :7 inches Screen Resolution : 1920 x 1200 Aspect Ratio : 16 • 10 Brightness : 2600 nits Touchscreen : Yes Ports : 4K HDMI Type-A (HDMI 1.4) input and output, 3.5mm headphone output