Dakshin Haryana Bijli Vitran Nigam Limited Tender

Modular kitchen - Under counter storage cabinets: Providing and fixing factory made modular kitchen cabinets in modular type knockable cabinet boxes with openable shutters and sufficient number of drawers made of 18 mm thk. ISI Marked comm. ply , all ply to be laminated with 0.8 mm laminate.All shelves should be supported on approved quality SS pins and shall be adjustable for different heights as per requirements.Shutters and drawers fascia shall be at least 18mm thic with laminate on both sides with 18mm wide 2mm thick PVC edge banding, All Shutters finished in high gloss acrylic of approved make- Rehau,Ornare,Senosan. The cabinet boxes of floor units will be supported by 100mm height vertical adjustable legs (Hettich make) which will be covered with PVC skirting (Rehau or equivalent make ) in brushed aluminum finish attached by hardware of skirting. The unit shall be fixed to the floor/ wall/slab using metal screws of appropriate size and rawl plugs. Only front face area of cabinets and skirting from floor to top of boxes shall be considered for measurement and payment. Cabinet boxes size would be varies from 400X560X710MM to 1000X560X710MM (approx.) and join together as per site requirements etc.

Officers / PS to MD Cabin Table - Providing and Supplying HNI Make Cabin Table with Main Table Dimension 1650mm L x 750 mm D and side storage 1200mm L x 450mm D x 750mm Ht . The Worktop is made of 25mm thick Prelaminated particle board with 2 mm thick PVC Lipping on the edges. The worktop is supported on inclined open Metal Legs 50mm x 50mm , powder coated understructure with Laminate Modesty panel. The Metal legs are connected by Metal Beams for stability and . The Table tops should have metal inserts on underside for modularity. The screw used should be blunt headed and not sharp headed for metal to metal coupling . Colour as per direction of Engineer in Charge. Main Table has 3 Drawer Laminate Pedestal with Castors 400mm W x 450 D x 680mm Height. Side Storage is a hinged door unit and its body is made of 18mm thick pre laminated partical Board conforming to IS : 12823. The back of the unit is made from 18mm prelaminated board. All the exposed edges are with 2mm PVC egde Imported banding and sealed edges are with 0.8mm thick PVC Imported edge banding. The top, side and hinged shutters are sealed with 2mm thick PVC edge banding. The units are assembled by knock down fittings such as Minifix and Dowels. All the hardware and Hinges are from Hettich/Ebco.

Cabin Main Chair - Providing and supplying HNI/ Geeken or equivalent make to entire satsifaction of engineer-in-charge. Model Quip High Back Chair with head rest .This is a High back chair with Mesh Back with back tilt tension adjustable . The chair mesh is available in 6 different colours ( Green / Ruby / Cinnamon / Magenta / Indigo / Black ) with matching or contrast seat fabric according to the choice of the client..The chair has Adjustable Lumber Support . The Chair has Nylon base with 60 mm twin wheel castors .Chair has 1-D adjustable armrests with PU Pads . Seat size is 490 mm W x 435 mm D and the Chair Height 1135mm - 1225mm . Overall size of the chair is 640mm W x 665mm D x (985 mm- 1220mm) H .The chair has Pneumatic Gas Lift with Stroke=85 mm . Chair carries a warranty of 5 years.

Cabin Visitor Chair - Providing and supplying HNI Model Certo Medium Back Chair .This is a Medium back chair with Mesh Back with back tilt tension adjustable . The chair has Anchored Lumber Support . The Chair has Nylon base with 50 mm twin wheel castors .Chair comes with fixed PP armrests . Seat size is 500 mm W x 520 mm D and the Chair Height 985 mm - 1080 mm . Overall size of the chair is 635mm W x 605 mm D x (985 mm- 1080mm) H . The PU foam used for chair seat is fire retardant . The chair has Pneumatic Gas Lift with Stroke=85 mm . WARRANTY: 3 Years from the date of invoice .

LINEAR WORKSTATION (MAX-1) Consisting 60mm thick aluminium extruded power coated panel based partition of height 1200 mm having provision of fabric/soft pin up board / white marker, raceways on two level for data and electrical, 25mm thick PLPB work top with pvc edge banding on all sides, top supported by 25mm thick pvc edge banded gable end . Partition W 1200 X H1200 X TH60mm. Front partition (pin- UP and W/b)

LINEAR WORKSTATION (MAX-1) Partition W 900 X H1200 X TH60mm. Side partition (LAM. / LAM)

LINEAR WORKSTATION (MAX-1) Partition W 600 X H1200 X TH60mm. Side partition (LAM. / LAM)

LINEAR WORKSTATION (MAX-1) LiNEAR WORTOP Size - W 1200 X D 600 X TH25mm PLPB

LINEAR WORKSTATION (MAX-1) Key Board Tray - Laminated

LINEAR WORKSTATION (MAX-1) CPU Trolly - Laminated

LINEAR WORKSTATION (MAX-1) Fixed drawer unit w400xd450xht.725mm

Providing and fixing false ceiling light of size 2.00 x 2.00` of 48 watt. Phillips make

providing and fixing of Frosted sheet of Glass panes in doors and windows complete in all respect to the entire satisfaction of engineer in charge.

Providing and fixing Stainless steel satin finish SS 304 grade 6` LONG Handles with SS screws for wooden doors of approved make and model all complete as per the directions of Engineer-in-charge