Dakshin Haryana Bijli Vitran Nigam Limited Tender

Providing and fixing G/W hinge 90 degree SNGL side plate in main glass door of Dorma make XLC8007 as per satisfaction of engineer incharge.

Providing and fixing G/G hinge 180 degree in main glass door of Dorma make XLC8004 as per satisfaction of engineer incharge

Providing and fixing floor handles in main glass door of Dorma make XLC3039A as per satisfaction of engineer incharge.

Providing and fixing 12mm thick toughened glass in fixed window and ventilator in UPVC frame as per satisfaction of engineer incharge.

Providing and fixing 12mm thick toughened glass in frameless door as per satisfaction of engineer incharge.

Providing and fixing 8mm thick toughened glass in frameless door as per satisfaction of engineer incharge.

supply of SS bolt 316 grade of hilty make of size 300mm x 20 mm for rebarring work complete in all respect as per satisfaction of engineer incharge.

supply of SS bolt 316 grade of hilty make of size 120mm x 12 mm for rebarring work complete in all respect as per satisfaction of engineer incharge.

Providing and fixing of SS 304 grade bolt 50mm x 8mm having 2 no washer I no cap for supporting of 4` X 2` Tile fixed in LGSF section after making the hole in tile and LGSF section complete as per satisfaction of engineer incharge.

Providing and fixing of voltage stabilizer for air conditioner complete in all respect as per satisfaction of engineer incharge.

Supply of bathroom vanity of Stainless steel with washbasin complete in all respect as per satisfaction of engineer incharge.

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :15 mm nominal bore jaquar make

Providing and fixing C.P. brass Hand shower of approved quality conforming to IS:8931 :15 mm nominal bore JAQUAR MAKE

Providing and fixing Waste coupling of approved quality conforming to IS:8931 :15 mm nominal bore JAQUAR MAKE

Providing and fixing Toilet paper holder of approved quality conforming to IS:8931 :15 mm nominal bore

Providing and fixing Anglular Stop cock of approved quality conforming to IS:8931 :15 mm nominal bore

supply of allen key SS bolt 304 grade of size 150mm x 12 mm for rebarring work complete in all respect as per satisfaction of engineer incharge.

Providing and fixing C.P. brass pillar cock of approved quality conforming to IS:8931 :15 mm nominal bore JAQUAR MAKE

Supplying and placing of chair of dimensions 635W x 630D x 800H mm. The seat height shall be 455mm.The back shell shall be made of 15mm plywood panle connected using Brackets made from 3mm Hot Rolled Steel Plates . Steel brackets are Epoxy Polyester Powder Coated. 25mm PU Slab -Stock foam is pasted onto both sides of the shell and pinched together to achieve the radius along the periphery. It shall be upholstered in Leatherette. The seat cushion shall be made using 50mm PU Slab-stock foam and is upholstered in Leatherette. It shall be held in place with Hook and Loop tape stitched to its bottom side. The understructure shall be made of seasoned Tewak Wood finished witrh clear matt coat of PU Lacquer. Undrstrucutre members shall be glued together using Epoxy Resin Based Adhesive. The shell is fixed to the understructure using Alloy steel hardware (blackened and coated with rust preventive oil). Complete all as per the direciton of Engineer in Charge. GODREJ make

Providing and placing in position Square table. Worktop is made of 25mm MDF OSR with pu matt finish on top side. Hardness on top surface is 2H. The worktop is available in 5 shapes: viz.: Circle, Bite, Rectangle, Square and Face UNDER-STRUCTURE: The under-structure consists of an InnerTube Assembly with Top Plate, for Worktop Mounting, and an Outer Tube Assembly with Round/Rectangle/Square Bottom Plate. The Inner and Outer Tube Assemblies are telescopically connected. The Top Plate is made of 5mm thk HOT ROLLED Steel Plates (HR) (As per IS:2062) and the bottom plate is made of 8mm thk HOT ROLLED Steel Plates (HR) (As per IS:2062). The Inner Tube Assembly is made of 082.5 x 2thk ROUND ELECTRIC RESISTANCE WELDED Tubes (ERW)(As per IS:7138) and 8mm thk HOT ROLLED Steel Plates (HR) (As per IS:2062) welded together using TUNGSTEN INERT GAS Welding. The Outer Tube Assembly is made of 089 x 2.5 thk and ROUND ELECTRIC RESISTANCE WELDED Tubes (ERW)(As per IS:7138) and 8mm thk HOT ROLLED Steel Plates (HR) (As per IS:2062) welded together using TUNGSTEN INERT GAS Welding. The whole structure is EPDXY POLYESTER Powder Coated (DFT 40-60 microns). The product has a knock-down construction. It is assembled using alloy steel hardware (blackened and coated with rust preventive oil). Company should be Greengaurd(UL) BIFMA and AIOTA certified. Complete all as per the direciton of Engineer in Charge. GODREJ make

Providing and Placing in position Hi stool.SEAT ASSEMBLY: Seat is leatherette upholstered cushion fitted to a seat tray. The cushion is made of 1.2 cm of PU slabstockfoam.Slabstock foam glued to CRCA sheet of 0.12 cm (±0.01cm) thick and upholstered with leatherette.The seat tray l5 made of CRCA steel of 0.25 cm thk (±0.01cm) as per IS:513. It is powder coated with epoxy based polyster powder coating (40-60 microns). * SEAT CUSHION SIZE : 40.0 cm. (W) x 34.5 cm. (D) * TOP TRAY SIZE: 41.5 cm. (W) x40.0 cm. (D) WOODEN UNDERSTRUCTURE: Understructure of bar stool is made of FSC-certified seasoned teak wood finished with a clear matt coat of PU lacquer. * UNDERSTRUCTURE SIZE : 48.6 cm (W) x 47.0 cm (D) x 6.88 cm (H) FOOT REST ASSEMBLY : Foot rest is made up of 01.6 cm (±0.02 cm) M.S. ERW tube (IS:71380). It is epoxy based powder coating (40-60 microns). Additionally it is coated with abrasion resistance coating. * FOOT REST SIZE : 40.3 cm (W) x 38.7 cm (0). Company should be Greengaurd(UL) BIFMA and AIOTA certified.Complete all as per the direction of Engineer in Charge. GODREJ make

Providing and laying of kerakoll adhessive H40 gel white used in wall tile 4`x 2` size as per satisfaction of engineer incharge.

Providing and fixing 4mm thick ACP sheet in doors complete in respect as per satisfaction of engineer incharge.