Command Area Development Authority Tender

Hydrant assembly for Nakka in field, Rates including Tee, riser pipe, butterfly valve, Flange and labour for fixing butter fly valve should be as per IS 13095-2020 (NS)

Providing, lowering, laying, aligning, fixing in position and jointing ( with medium bodied cement solvent) at all level/depths of type-B, Class-2 (4kg/cm2) UPVC pipes for water supplies as per IS code 4985-2021 (amended up to date) in trenches in complete including cost of specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing ) and commissioning as per technical specifications and as per direction of engineer. Rate includes cost of all specials like bends, tees required during laying of pipe line along required Alignment . 110 mm upvc Pipes (NS)

Supply Installation testing commissioning of Solar Photovoltaic Stand alone Plant conforming to MNRE specifications as amended, consisting of Mono Crystalline silicon solar cells, necessary protections, earthing, mounted on Aluminium/GI structure of suitable strength. Including lightning and surge voltage protection, Fixing of Array junction box and Main junction box with IP 65 protection and termination arrangement for incoming and outgoing cable along with glands, lugs and other accessories etc. as required, built in metering system to moniter plant performence (Amp-meter, Volt-meter, Frequency meter, Energy meter, Watt-meter, and other instrument/equipment as required) Note:- PV modules used must qualify to the latest edition of IEC PV module qualification test or equivalent BIS standards Mono Crystalline Silicon Solar Cell Modules IEC 61215/IS14286. In addition, the modules must conform to IEC 61730 Part-1- requirements for construction and Part 2 – requirements for testing, for safety qualification or quivalent IS and be mounted on fixed Aluminium/GI structure of adequate strength and design as per IEC/IS specification. Including field-based electroluminescence (EL) study be performed after receiving the modules at site and after installation. Module mounting structure (MMS) design and drawing shall be duly vetted from government institute Including third party inspection Actual parameters/capacity will be finalized after approval of design and drawing. ( Rates approved in TAC,MICADA Haryana meeting on 09.02.2022)` (NS)