Command Area Development Authority Tender

Galvanizes steel chain link both end twisted fence fabric having opening size 7.5x7.5 cm and 3.15 mm dia wire, 2.2 meter height of mesh, with 2.8 meter ht of MS Angle 50x50x5 mm supports fixing at spacing of 3 meter centre to centre, supports with MS Flat 35x5 mm. Fencing supported with MS Angle 35x35x5 at top and bottom. The M.S Angle supports shall be anchored in cement concrete (1:3:6) blocks 45x45x60 cm additional razor barbed wire fencing shall be provided at the top of mesh, fencing including gate

Providing and fixing 12 Watt LED Street Lighting of 75 watt solar panel, 12.8 volt 30 Ah Lithium Ferro Phosphate battery, 12 Watt White LED Luminaire and Pole of 5 Meter above ground level with dusk to dawn operation {first 4 hours full light Systemding, fixing and testing of Solar light including battery: min. 24 lux) , rest of the time at lower light (50% Min. 12 lux) level} and 3 days or minimum 36 operating hours autonomy or as per direction of engineer-in-charge

Providing fixing of Header Assembly/Manifold 3` to connenct the filtration unit (loose)

Hydrant assembly for Nakka in fields, Rates are including rates of Tee, riser pipe, butterfly valve, Flange and labour for fixing butter fly valve should be as per IS 13095-2020

providing and fixing of 3` plastic hydraulic control valve threaded (quick pressure relief)

providing and fixing of 1.5` plastic air cum vacuum relief valve.

providing and fixing of 2` continuous acting air cum vacuum relief valve.

Providing and Fixing of RTU for 10 no of valves with 3AI and 3DI signal with LORAWAN, Solar charger, rechargable lithium battery, suitable solar panel, suitable antena length and GI Pole complete as per Site Incharge - AQUA / Milesite / Advantech / Reynolds Tech.

Providing and fixing of 4` Semi Automatic Screen filter with pressure differential which will give alarm at SCADA room in case filter is choked - AQUA / Amiad / Finolex.

Providing and fixing of a double acting Continuous Air release valve with PVC Ball Valve 2` made of Plastic. The Continuous Air release valve shall be capable of both releasing and admitting air from and into the line during system operation. The working pressure shall be 10 Bars and testing pressure shall be 16 Bars. - AQUA / Armas / Dorot.

Providing and Fixing of 4` Butterfly Valve before OMS for safety purpose. It shall be with integral synthetic rubber lining. It shall be lever operated quarter turn and offers bi-directional smooth operation. The hydraulic body test pressure of the Hybrid plastic buffer type Butterfly Valve is 10 bar and hydraulic seat test pressure of the product is 8 bar. AQUA / Gorgefisher / SAB.

Providing and Fixing of 4` BSP Straight flow Solenoid valve, 3 way, flange end with flow control which shall be normally closed 12-24 VDC cycle solenoid actuated angle pattern design. The valve pressure rating shall not be less than 10.5 bar. The valve body shall be constructed of high-impact, weather-resistant Nylon Glass Filled with heavy duty diaphragm and stainless steel screws, fasteners and components. The valve shall have manual open/close control (internal bleed) for manual opening and closing of valve without electrically energizing the solenoid, manual bleed can be removed for ` tamper proof` operation. The valve shall operate with minimum 9 VDC -30 VDC at 10.5 bar. The valve must open or close in less than 1 minute at 10.5 bar, and less than 30 seconds at 0.7 bar. The valve construction shall provide for all internal parts to be removable from the top of the valve without disturbing the valve installation. Hydromat / Armas / Dorot.

Providing and Fixing of Nylon Glassfilled Modular manifold with suitable victaulic fanges and victaulic grooved coupling for 10 no of valves and other above items - Automat / SAB / Dorot.

Providing and Fixing of pressure transmitter - Dunfoss / Honeywell / Wika.

Providing and Fixing of paddle wheel flow meter - Nuclus / Flowtronics / Ztron.

Providing and Fixing of Encloser Box made of MS (MOC) 1.2mm thickness (using stiffeners). A suitable height frame to be provided to elevate from ground for maintenance. Encloser box has to be provided with tamper switch..

Providing and Fixing of 8 DO/DI relay communication card (RS485module) with ethernet cable - AQUA / Advantech / MOXA.

Providing and Fixing of base station communication device with 5 meter length antena wire and 8 DB antena - AQUA / Teklotic / Advantech.

Providing and Fixing of Router for PC and base station communication with ethernet cable - D-Link / TP-Link / Cisco.

Providing and Fixing of PC work station with 23` screen and suitable UPS.

Providing and Fixing of SCADA Software for automatic operation of system capable of operating 6 pumps, 2 solenoid valve under each distribution management system, feed back of opening and closing of valves, Discharge flow, pressure at DMS while system is in operation, ON/OFF of solenoid valves with DC latch. - Automat / Prudent / Warta.

Providing and Fixing of Pump start relay for DC pumps - Pla / Siemens / Pheonix Control .

Providing and Fixing of suitable electric cabling between pump start relays and RS485 module. - Finolex / Havells / Empire.

Preparation and implementation of warabandi of the complete chak and Identification of training needs of the farmers. Preparation of training modules on various subjects concerned, operation and maintenance of the MI systems, Solar array, pumping systems. and cropping pattern etc. Providing necessary training to the farmers as required. Necessary training shall be provided to the WUA members and the staff identified by the Engineer, also for all activities involved in the OandM of the complete MI System.

Complete operation and watch and ward of the project 1 plus 3 year including operation of pump house, pipe line and accessories, electromechanical solar plants complete in all respect.

Construction of control room/Regulation cum watch and ward hut as per approved design and drawing including water supply, sanitary fitting, electric fitting, septic tank and other items as required.

Supply, installation, Testing and Commissioning of VFD Drive for Pumps (15HP)

Supply, installation, Testing and Commissioning of VFD Drive for Pumps (20 HP)

Providing, lowering, laying, aligning, fixing in position and jointing at all level/depths ISI marked HDPE pipe of PE-80 grade SDR-26 and PN-4 for irrigation as per IS 4984: 2016 (amended up to date) in tranches in complete including cost of HDPE Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Rate includes cost of all specials like bends, tees required during laying of pipe line along required alignment. (110mm HDPE pipe)

Providing, lowering, laying, aligning, fixing in position and jointing at all level/depths ISI marked HDPE pipe of PE-80 grade SDR-26 and PN-4 for irrigation as per IS 4984: 2016 (amended up to date) in tranches in complete including cost of HDPE Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Rate includes cost of all specials like bends, tees required during laying of pipe line along required alignment. (140mm HDPE pipe)

Providing, lowering, laying, aligning, fixing in position and jointing at all level/depths ISI marked HDPE pipe of PE-80 grade SDR-26 and PN-4 for irrigation as per IS 4984: 2016 (amended up to date) in tranches in complete including cost of HDPE Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Rate includes cost of all specials like bends, tees required during laying of pipe line along required alignment. (160mm HDPE pipe)

Providing, lowering, laying, aligning, fixing in position and jointing at all level/depths ISI marked HDPE pipe of PE-80 grade SDR-17 and PN-6 for irrigation as per IS 4984: 2016 (amended up to date) in tranches in complete including cost of HDPE Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Rate includes cost of all specials like bends, tees required during laying of pipe line along required alignment. (200mm HDPE pipe)

Supply Installation testing commissioning of Solar Photovoltaic Stand alone Plant conforming to MNRE specifications as amended, consisting of Mono Crystalline silicon solar cells, necessary protections, earthing, mounted on Aluminum/GI structure of suitable strength, anti-theft screws. Including lightning and surge voltage protection, fixing of Array junction box and Main junction box with IP 65 protection and termination arrangement for incoming and outgoing cable along with glands, lugs and other accessories etc. as required, built in metering system to monitor plant performance (Amp-meter, Vold-meter, Frequency meter, Energy meter, Watt-meter, and other instrument/equipment as required) Note:- PV modules used must qualify to the latest edition of IEC PV module qualification test or equivalent BIS standards Mono Crystalline Silicon Solar Cell Modules IEC 61215/IS14286. In addition, the modules must conform to IEC 61730 Part-1- requirements for construction and Part 2 – requirements for testing, for safety qualification or equivalent IS and be mounted on fixed Aluminum/GI structure of adequate strength and design as per IEC/IS specification. Including field-based electroluminescence (EL) study be performed after receiving the modules at site and after installation. Module mounting structure (MMS) including suitable foundation, design and drawing shall be duly vetted from government institute including third party inspection.

Supplying, erection, testing and commissioning of Solar AC Open-well Submersible Pump Set with three phase motor having casing of Alloy Steel for the required power capacity, discharge and Head including all PVC insulated polymer sheathed 3 core flat type cabling in conduit, required from solar plant to solar pump through control room. (20HP)

Providing, lowering, laying, aligning, fixing in position and jointing at all level/depths ISI marked HDPE pipe of PE-80 grade SDR-17 and PN-6 for irrigation as per IS 4984: 2016 (amended up to date) in tranches in complete including cost of HDPE Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Rate includes cost of all specials like bends, tees required during laying of pipe line along required alignment. (180mm HDPE pipe)

Supplying, erection, testing and commissioning of Solar AC Open-well Submersible Pump Set with three phase motor having casing of Alloy Steel for the required power capacity, discharge and Head including all PVC insulated polymer sheathed 3 core flat type cabling in conduit, required from solar plant to solar pump through control room. (15HP)

NS Item -Complete Maintenance of pump house, pipe line and accessories, electromechanical and solar plant etc complete in all respect (36 months)