Chaudhary Ranbir Singh University Tender

Executive Chair (B Type) Specifications: Providing and supplying a high back chair with ergonomic design, comfortable & aesthetically appealing. The seat and back shall be made of 18mm thick hot pressed commercial plywood padded with high resilience polyurethane foam (40+40)mm thick having density (40 & 32)kg/m³ in seat and (30+30)mm thick having density (32, 32)kg/m³ in back. The same shall be upholstered with Fabric. The backrest shall be made by keeping the natural curvature of the spine for lumbar support which helps to provide full back support as well as head support. The chair shall be supplied with polypropylene arm with cushion base leatherette covering top. For seating durability the chair shall have torsion bar 360 degree revolving mechanism with upright position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 65mm gas-lift to suit them using the lever under the seat. The Pedestal should have five legged MS CRCA powder coated with 50-60µ DFT thick having pitch circle dia. 660 mm fitted with 5 nos. twin wheel castors. The castors of the chair should be injection moulded in black 30% glass filled nylon, tested to perform 98,000 cycles with 250lbs load. The seat size shall be 500±10 mm(D) X 520±10 mm(W) and back size shall be 520±10 mm(W) X 700±10 mm(H) from seat. Overall height shall be = 1160±10 mm, overall depth = 680±10 mm & overall width = 660±10 mm.

Executive Table - Type C Specifications: Supplying & Placing executive table with credenza unit and pedestal unit in completely knock down conditions with an overall size 1800-1900 mm X 2000 mm X 750 mm that is to be assembled at site. The construction of the main table shall be free standing structure constructed with the help of minifix dowels and pins. The worktop shall have the size 1800mm X 800mm made up of 50mm thick Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. The table top profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The top shall be enclosed with wire manager cap for electric provision. A pullout keyboard trey shall be provided of 18mm thick Pre-laminated particle board having size 550mm X 300mm. The trey shall be operated on sliding channel. The table top shall be supported on particle board base gable end. The end wall of the table on the side shall be topped by gable end. It should be made up of 25mm thick Pre-laminated particle board and profile shall be in linear shape with appropriate PVC edge banding. The table shall be clad with 18mm thick modesty panel which provide structural support for the table. It should be 18mm thick pre-laminated particle board in linear shape with appropriate PVC edge banding connected with both end. There shall be buffers provided at the base to avoid scratches on the floor. The table shall have credenza unit for storage purpose with an overall size 1200mm X 450mm X 650mm. It should be made up of Pre-laminated particle board of grade II of IS 12823 with base 9mm thick and other parts 18mm thick like shutter, back, facia, side panel etc. It shall have 2 box drawer, 1 filing drawer and 1 shutter. It should be operated with the assistance of SS handle, concealed crank hinge and easily close & open with the assistance of roller channel and ball bearing channel to enable smooth operation. The drawer shall have central locking mechanism in which all the drawer shall be synchronized locked with one single key. It shall be mounted on injection moulded nylon castor. A mobile pedestal shall be provided with an overall size 400mm X 450mm X 650mm. The pedestal shall be made up of Pre-laminated particle board of grade II of IS 12823. Pedestal side, back, top, facia shall be 18mm thick and drawer base shall be 9mm thick. The pedestal shall have 3 nos. of drawer i.e. 2 box drawer and 1 filing drawer. The drawer shall be operated with SS handle and easily close & open with the assistance of roller channel and ball bearing channel to enable smooth operation. The drawer shall have central locking mechanism in which all the drawer shall be locked with one single key. The pedestal shall be mounted over injection moulded nylon castor. All the size shall have the tolerance of upper and lower deviation of ±10mm for board & ±0.2mm for metal. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007. The board used should meet International Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380

Executive Chair (C Type) Specifications: Providing and supplying a mid back chair with ergonomic design, comfortable & aesthetically appealing. The seat and back shall be made of 18mm thick hot pressed commercial plywood padded with high resilience polyurethane foam (40+40)mm thick having density (40 & 32)kg/m³ in seat and (30+30)mm thick having density (32, 32)kg/m³ in back. The same shall be upholstered with Fabric The backrest shall be made by keeping the natural curvature of the spine for lumbar support which helps to provide full back support as well as head support. The chair shall be supplied with polypropylene arm with cushion base leatherette covering top. For seating durability the chair shall have torsion bar 360 degree revolving mechanism with upright position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 65mm gas-lift to suit them using the lever under the seat. The Pedestal should have five legged MS CRCA powder coated with 50-60µ DFT thick having pitch circle dia. 660 mm fitted with 5 nos. twin wheel castors. The castors of the chair should be injection moulded in black 30% glass filled nylon, tested to perform 98,000 cycles with 250lbs load. The seat size shall be 500±10 mm(D) X 520±10 mm(W) and back size shall be 520±10 mm(W) X 700±10 mm(H) from seat. Overall height shall be = 1160±10 mm, overall depth = 680±10 mm & overall width = 660±10 mm.

Visitor Chair (A) Specifications Providing and supplying a visitor chair with ergonomic design for user comfort & aesthetically appealing. The seat and back shall be made of 18mm thick hot pressed commercial plywood padded with high resilience polyurethane foam (40+40)mm thick having density (40, 32)kg/m³ in seat and (30+30)mm thick having density (32, 32)kg/m³ in back. The same shall be upholstered with leatherette tapestry 1 mm thick and 571 GSM. The backrest shall be made by keeping the natural curvature of the spine for back support. The chair shall be supplied with polypropylene arm with cushion base fabric covering top. The frame structure shall be cantilever support type made of CRCA powder coated 50-60µ thick round pipe of dia. 28.5mm with 2mm thick. There shall be PPCP shoe provided at the base to avoid scratches on the floor. The Seat size shall be 500±10 mm(D) X 520±10 mm(W) and back size shall be 520±10 mm(W) X 625±10 mm(H) from seat. Overall height shall be = 1040±10 mm, overall depth = 680±10 mm & overall width = 660±10 mm.

Three Seater Sofa Specifications: Supplying and placing three seater sofa that shall be constructed from natural hard wood and marine grade as per IS: 710 plywood having inner frame. The thickness of the wood should allow for the heavy tension webbing. The sofa shall have spring attached and also be padded separately. The frame shall be padded with high resilience polyurethane foam having density 40Kg/m³ in seat and 32Kg/m³ in back. There shall be cushion arm provided padded with high resilience polyurethane foam having density 40Kg/m³. The structure shall be upholstered with Fabric Dual Tone. The understructure shall consist of SS 304 grade legs having cross-section area 40 mm X 20 mm x 1.6 mm thick. There shall be shoe provided at the bottom to avoid scratches on the floor. The seat size shall be 550±10 mm(D) X 1650±10 mm(W), seat height = 450±10 mm, overall width = 2320±10 mm, overall depth = 900±10 mm & overall height = 820±10 mm.

Two Seater Sofa (REG) Specifications: Supplying and placing Two seater sofa that shall be constructed from natural hard wood and commercial plywood having inner frame. The thickness of the wood should allow for the heavy tension webbing. The sofa shall have spring attached and also be padded separately. The frame shall be padded with high resilience polyurethane foam having density 40Kg/m³ in seat and 32Kg/m³ in back. There shall be cushion arm provided padded with high resilience polyurethane foam having density 40Kg/m³. The structure shall be upholstered with Fabric Dual Tone. The understructure shall consist of SS 304 grade legs having cross-section area 40 mm X 20 mm x 1.6mm thick. There shall be shoe provided at the bottom to avoid scratches on the floor. The seat size shall be 550±10 mm(D) X 550±10 mm(W), seat height = 450±10 mm, overall width = 1120±10 mm, overall depth = 900±10 mm & overall height = 820±10 mm.

One Seater Sofa (REG) Specifications: Supplying and placing single seater sofa that shall be constructed from natural hard wood and commercial plywood having inner frame. The thickness of the wood should allow for the heavy tension webbing. The sofa shall have spring attached and also be padded separately. The frame shall be padded with high resilience polyurethane foam having density 40Kg/m³ in seat and 32Kg/m³ in back. There shall be cushion arm provided padded with high resilience polyurethane foam having density 40Kg/m³. The structure shall be upholstered with Fabric Dual Tone. The understructure shall consist of SS 304 grade legs having cross-section area 40 mm X 20 mm x 1.6mm thick. There shall be shoe provided at the bottom to avoid scratches on the floor. The seat size shall be 550±10 mm(D) X 550±10 mm(W), seat height = 450±10 mm, overall width = 1120±10 mm, overall depth = 900±10 mm & overall height = 820±10 mm.

Centre Table (A Type) Specifications Supplying & placing center table with an overall size 1200mm X 600mm X 450mm. The top shall be made up of 12mm thick toughened glass. The profile shall be in rectangle shape with bevelled edges. The bottom storage shelf shall be provided with an overall size 1155mm X 280mm made of 8mm thick toughened glass with bevelled edges. The glass shall be supported on vacuum caps situated over SS 304 grade pipe frame. The under structure shall have SS pipe frame having size 67mm X 13.5mm. There shall be PPCP shoe provided to avoid scratches on the floor.

Side Table (A Type) Specifications: Supplying & placing center table with an overall size 600mm X 600mm X 450mm. The top shall be made up of 12mm thick toughened glass. The profile shall be in square shape with bevelled edges. The bottom storage shelf shall be provided with an overall size 555mm X 280mm made of 8mm thick toughened glass with bevelled edges. The glass shall be supported on vacuum caps situated over SS 304 grade pipe frame. The under structure shall have SS pipe frame having size 67mm X 13.5mm. There shall be PPCP shoe provided to avoid scratches on the floor.

Side Table (B Type) Specifications: Supplying & placing center table with an overall size 600mm X 600mm X 450mm. The top of the table shall be made up of 18 mm ply and 1 mm thick mica laminated. The table top profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius and should have matching shade. The profile shall be in square shape with bevelled edges. The bottom storage shelf shall be provided with an overall size 555mm X 280mm made of 8mm thick toughened glass with bevelled edges. The glass shall be supported on vacuum caps situated over SS 304 grade pipe frame. The under structure shall have SS pipe frame having size 67mm X 13.5mm. There shall be PPCP shoe provided to avoid scratches on the floor.

Centre Table (B Type) Specifications: Supplying & placing center table with an overall size 1200mm X 600mm X 450mm. The top of the table shall be made up of 18 mm ply and 1 mm thick mica laminated. The table top profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius and should have matching shade. The profile shall be in rectangle shape with round corner. The top shall be supported on SS 304 grade frame with cross-section area 40mm X 20mm with 1.6mm thick. The under structure shall consist of four legs made of SS 304 garade oval pipe having cross-section area 52mm X 26mm with 1.6mm thick. There shall be co-polymer polypropylene shoe provided at the bottom to avoid scratches on the floor.

Visitor Chair ( Type B) Specifications: Providing and supplying visitor chair with ergonomic design for user comfort. The seat and back shall be made of 15mm thick hot pressed commercial plywood padded with high resilience moulded polyurethane foam 50mm thick having density 45kg/m³ in seat and 45mm thick having density 35Kg/m³ in back. The same shall be upholstered with fabric tapestry 1mm thick and 300 GSM. The back and base of chair shall be supplied with polypropylene/ABS moulded cover and the backrest shall be made by keeping the natural curvature of the spine. The seat and back shall be arrested together with 50-60µ thick powder coated HR steel spine and the armrest shall be used black integral polyurethane arm with metal insert completely joint with seat and back. The frame structure shall be cantilever support type made up of CRCA powder coated with 50-60µ (DFT) thick round pipe of dia. 25.4mm with 2mm thick. There shall be PPCP shoe provided at the base to avoid scratches on the floor. The seat size shall be 480±10 mm(W) X 450±10 mm(D) and back size shall be 480±10 mm(W) X 400±10 mm(H) from seat & overall height = 820±10 mm.

Study Table Specifications: Supplying and placing table in knock down condition with an overall size 1200mm X 600mm X 750mm that is to be assembled at site. The worktop shall be made up of 18mm thick Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. The table top profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree celsius. The top shall be supported on CRCA rectangle pipe frame having cross-section area 40mm X 20mm with 1.6mm thick. The table understructure shall be supplied with CRCA round pipe having dia. 25.4mm with 1.6mm thick. 1 nos. footstep shall be provided between both side leg with the same size i.e dia. 25.4mm with 1.6mm thick. Fixed pedestal metallic unit shall be supplied with 3 nos. of drawer at one side. All the drawer shall be synchronized locked with central locking mechanism by one single key. The drawer shall be operated with recessed handle. All the size shall have the tolerance of upper and lower deviation of ±10mm for board & ±0.2mm for metal.

Study Chair Specifications Providing and supplying chair The seat shall be made of 12mm thick hot pressed plywood upholstered with high resilience polyurethane foam (50+19)mm thick having density 40kg/m³ and the back shall be made of pipe frame upholstered with high resilience polyurethane foam (19+19)mm thick having density 23kg/m³. The same shall be upholstered with fabric. The armrest shall be used cushion arm mounted on pipe frame. The frame structure shall be cantilever support type made up of SS 304 grade chrome finish round pipe of Dia 25.4mm with 2mm thick. There shall be PPCP shoe provided at the base to avoid scratches on the floor. The seat size shall be 480±10 mm(D) X 510±10 mm(W) and back size shall be 510±10 mm(W) X 440±10 mm(H) from seat. Overall height shall be = 870±10 mm, overall depth = 660±10 mm & overall width = 560±10 mm.

Clerk Table Specifications: Supplying and placing a modular table with an overall size 1200mm X 600mm X 750mm. The top of the table shall be made of 18mm thick Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. The profile of the top shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel with the assistance of edge banding machine at 200 degree celsius. The top shall be supported on CRCA rectangle pipe frame having cross-section area 40mm X 20mm with 1.6mm thick. The table understructure shall be supplied with CRCA rectangle pipe having cross-section area 40mm X 20mm. The gable end shall be given at one side made up of 0.8mm thick perforated high yield strength CRCA sheet of grade 'D' confirming to IS:513. Fixed pedestal unit with powder coated metallic body shall be supplied with 3 nos. of drawer i.e. 2 box+1 filing at one side. All the drawer shall be synchronized locked with central locking mechanism by one single key. The drawer shall be operated with ABS plastic recessed handle. The manufacturer shall have basic quality and safety certifications like ISO-9001:2015, ISO-14001: 2015, ISO-18001:2007.

Book Case Specifications: Providing and supplying metal book case with an overall size 915 mm (W) X 320 mm (D) X 1750mm (H). The book case shall be supplied with 4 nos. of individual compartments. Top, back & side panels shall be made of 0.8mm and rest 1mm high yield strength CRCA sheet of grade ‘D’ confirming to IS: 513. Each door shall have individual locking provision and 4 mm thick transparent glass for clear inside vision secured in a metal frame through rubber gasket. Each door shall have scissor mechanism for receding inside the top of respective compartment which ensures parallel & smooth movement. Each door shall have plastic side end caps as handle which is easy to grip. Each compartment has a storage shelf having Uniformly Distributed Load Capacity of each shelf is 40 Kg maximum. The finish is Epoxy Polyester Powder coated to the thickness of 40-60µ. Adjustable leveler shall be provided with metal insert to resist scratches on the floor and also level & support structure.

Library Rack Specifications: Providing, supplying and placing double side steel Library Racks in perfectly upright and straight position. The overall size of the rack shall be 940mm (W) X 600mm (D) X 2110mm (H). The rack shall be supplied with 4 nos. of adjustable shelves on both side i.e. 10 loading levels. Rack, side panel, skirting shall be made of 0.8mm thick high yield strength CRCA sheet of grade ‘D’ confirming to IS: 513. Side and top shall be covered with 18mm thick Pre-laminated particle board of grade II of IS 12823. The edges of the board shall be sealed with 2mm thick PVC edge banding. The add-on units can be stacked width wise to form a bank of racks having common side panel. The shelves shall be folded constructions which have intrinsic rigidity and high load carrying capacity. Uniformly Distributed load capacity per each shelf shall be 80kg maximum. Each shelf shall be provided with stiffener at bottom for strength and back stiffener for separator between front and rear shelf. All steel components shall be epoxy polyester powder coated to the thickness of 40-60µ. Adjustable leveler shall be provided with metal insert to resist scratches on the floor and also level & support structure.

Storage Rack Specifications: Providing, placing and installing a slotted angle rack with an overall size 900mm (W) X 400 mm (D) X 1800mm (H). The panel shall have 5 nos. of shelves made up of 1.2 mm thick high yield strength CRCA sheet of grade ‘D’ confirming to IS: 513. CRCA slotted angle shall be supplied with 3 mm thick having size 40mm X 40mm. All steel components shall be 40-60µ thick (DFT) powder coated after 7 tank pre-treatment process flow. Corner plate (gussets) and fasteners shall be provided for complete assembly.

Computer Table Specifications: Supplying & Placing computer desk with an overall size 1500mm(W) X 750mm(D) X 750mm(H). It should have work top made up of 25mm thick Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. The top profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree celsius. The top board shall be supported on fixed pedestal at one end and fixed CPU unit at another end. The desk shall be clad with 18mm thick modesty panel which provide structural support for the desk. The modesty panel shall have the size 690mm X 600mm with 18mm thick pre-laminated particle board connected with both end. 18mm thick pre-laminated board base keyboard tray shall be provided with an overall size 684mm X 350mm. The keyboard trey shall be operated by sliding channel to enable smooth operation. A fixed pedestal shall be provided with the size 400mm X 620mm X 725mm at one end with 3 drawer operated on roller channel and 1 filing drawer operated on ball bearing channel. All drawer shall be operated with SS handle with multi-purpose (MP) locking mechanism. Other side of table open type storage shall be provided with the size 400mm X 600mm X 725mm having one adjustable shelf to accumulate CPU. Complete understructure made in 18mm thick Pre-laminated particle board with appropriate edge banding and drawer base shall be 9mm thick. To protect the wall from kicks, abrasion and serve as a decorative moulding skirting shall be provided at bottom of the pedestal at both sides. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007.

Three Seater visitor Bench Specifications: Supply and installation of bench 3 seater for waiting room: Cross beam shall be made up of black powder coated rectangular M.S.ERW tube having 8 ± 0.03 cm x 4 ± 0.03 cm x 0.2 ± 0.014 cm size. Leg and armrest shall be chrome plated made of cold rolled steelwith 0.12 ± 0.013 cm thinkness. Seat back shell shall be 1.6 mm thk powder-coated perforated shell made from cold rolled M.S. sheet 0.14 ± 0.013 em thickness. The Side Bar shall be made of Chrome plated solid steel 3 ± 0.03 cm x 1.2 ± 0.3 cm (DIN174)with fluting and plastic inserts.The Shell shall be assembled on the Cross Beam with help of M8 Bolts (Per Seat- 8 nos. Seat to Bracket and 4nos. Bracket to Cross Beam). The seat & back cushion shall be made up of PU foam upholstered with leather cloth or fabric with plywood. Overall Dimensions shall be Seat Height - 40.0cm, Height - 67.5cm, Width & Depth of Chair as measured from pedestal - Width-163.0cm and Depth-57.0 cm.

Student desk cum bench Specifications: The class room desk consists of front desk, middle row comprising of seat for front desk, back supported & jointed with it the desk behind for another seat, back & another desk for the person sitting behind and so on till the last row which shall consist of seat only, provided with back support. Thus the desking system shall consist of one row of front desk, several rows of middle seat & back desk & again one last row of back seat. A. Front Desk: Top Size: 1200mm x 375mm x 18mm thick for two seater desk. (36 Nos.) Top Size: 1800mm x 375mm x 18mm thick for three seater desk.(180 Nos.) Made of 18mm thick Commercial plywood on top, front and rear edges. 800mm high in front and 750mm inside shall be fixed to the main frame with steel inserts and galvanized bolts. All exposed sides shall be protected with 2.0mm thick PVC edge binding tape affixed with hot melt glue. All the exposed edges shall be made 36 mm(18+18mm) and 1 mm thick Laminate on top, front and rear. Below the top is provided a storage shelf for the students to keep their bags, books etc. The vertical leg supporting the storage shelf below the working top must provide enough leg room for ease in moving in & out of desk. Also, there should be no sharp edges of the side supports to prevent hurting while moving in & out. The front of the desk should be cladded with 18mm thick commercial plywood plus 1 mm laminate , held inside the front frame with edges within the frame to provide protection to the board on edges. Underside of the table shall be finished with 0.6 mm thick laminate of white colour. B. Middle seat & desk: Shall consist of seat, back & writing shelf behind and storage shelf below it. The detail specifications will be as under: Seat size: 1200mm x 375mm x 18mm thick for two seater desk. Seat size: 1800mm x 375mm x 18mm thick for three seater desk. Made up of 18mm thick Commercial plywood on top, front and rear edges shall be fixed to the main frame with steel inserts and galvanized bolts. All exposed sides shall be protected with 2.0mm thick PVC edge binding tape affixed with hot melt glue. All the exposed edges shall be made 36 mm(18+18mm) and 1 mm thick Laminate on top, front and rear. Underside of the table shall be finished with 0.6 mm thick laminate of white colour. Back size: 1200mm x 375mm x 18mm thick for two seater desk. Back size: 1800mm x 375mm x 18mm thick for three seater desk. Made up 18mm thick Commercial plywood on top, front and rear edges) shall be fixed to the main frame with steel inserts and galvanized bolts. All exposed sides shall be protected with 2.0mm thick PVC edge binding tape affixed with hot melt glue. All the exposed edges shall be made 36 mm(18+18mm) and 1 mm thick Laminate on top, front and rear. Underside of the table shall be finished with 0.6 mm thick laminate of white colour. Writing shelf: 1200mm x 375mm x 18mm thick for two seater desk. Writing shelf size: 1800mm x 375mm x 18mm thick for three seater desk. Shall be made of 18mm thick Commercial plywood on top, front and rear edges 36mm below the top edge of the back to prevent interference with student sitting on the front seat. C. Last row: (Back row) The last row consists of seat & back only mounted on 50 x 25 x 1.6mm thick CRCA pipe frame. Back row size: 1200mm x 375mm x 25m thick for two seater desk. Back row size: 1800mm x 375mm x 18mm thick for three seater desk. Made up of 18mm thick Commercial plywood on top, front and rear edges shall be fixed to the main frame with steel inserts and galvanized bolts. All exposed sides shall be protected with 2.0mm thick PVC edge binding tape affixed with hot melt glue. All the exposed edges shall be made 36 mm(18+18mm) and 1 mm thick Laminate on top, front and rear. Underside of the table shall be finished with 0.6 mm thick laminate of white colour. The frame shall be made from 50 x 25 x 1.6mm thick CRCA steel pipes. Suitably designed for maximum strength & stability. Only for the provision of the storage shelf and cladding fixing, 25 x 25 x 1.6mm thick CRCA pipe shall be used. The entire cladding, shelving shall be pre-laminated particle 17mm thick. The seat, back & writing desk shall be 25mm thick particle, laminated on both sides, top laminate & balancing laminate on back as mentioned above. All the frame front, middle and last row shall be affixed to floor with 8 x 75mm anchor fasteners. Also, the top, back & seat shall be affixed with metal inserts & galvanized bolts. Wood screws shall not be used anywhere steel welding wherever required, shall be done by MIG welding process to minimize distortion and for the deep penetration of the weld. All the steel components shall be pre-treated for de-greasing, de-rusting and phosphating. After proper pre-treatment, the steel components shall epoxy power coated and oven baked at temp. Above 200 deg. C to provide scratch resistance surface coating film of thickness 50-60 microns. Note: 1. CRCA steel pipes shall be of TATA/Jindal make. 2. All Pre-laminated particle boards shall be of Action Tesa/Marino/Godrej make. Two Seater

Three Seater

Big Almirah Specifications: Providing, supplying and placing steel almirah in perfectly upright and straight position. The overall size of the almirah shall be 915mm (W) X 485mm (D) X 1980mm (H) including legs. It should be supplied with 4 nos. of adjustable shelves i.e. 5 loading compartments. Door shall be made of 1mm thick and all other components shall be made of 0.8mm thick high yield strength CRCA sheet of grade ‘D’ confirming to IS: 513. Stiffeners shall be provided in shelf & door. The steel hinged door shall be provided with locking mechanism which is assembled with bolt arrangement. The shelves shall have folded constructions which have intrinsic rigidity and high load carrying capacity. Uniformly distributed load capacity per each shelf shall be 40kg maximum. The complete steel structure shall be constructed by welding and provide finishing with epoxy polyester powder coated to be thickness 50-60µ.

Supply and installation of RECTA WORKSTATIONS - 900W x 600D Providing and placing Tile based modular workstation, with partition thickness as 50-60 mm and ht - 1200 including powder coated aluminium trims. Tiles on main spine: Combination of top tiles are PLB/fabric tackable/whiteboard tile. Bottom tiles - Plain metal. FIN: 22.5 mm thk panel formed out of blocks which are 2x9 mm thk PLB boards wrapped with laminate at intermediate block and top block. Bottom block is finished in metal finish. SPLIT Tiles on main spine: Combination of two finishes for the top tiles on the user side shall be decorative laminate/white board. INTERMEDIATE BLOCKS on main spine Intermediate blocks are given in DL + DL finish. (Decorative laminate) Wire Management through main spine- Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks. The partition has two integrated raceway provided one at skirting level and another at the work surface level thus ensuring separation of power and networking cables. Necessary cut outs for switches as per site requirement will be provided. cost of switches and wires not to be considered in furniture. it will be supplied by department separately. Side panels or legs - made of 25 mm thick pre-laminated particle board with flat pvc lipping edge binding tape considered only on the open end conditions or metal powder coated legs at the end and shared condition. PVC edge binding tape should be from Rehau or Dolken of Germany. System shall have 120 mm high powder coated standalone panel legs to give the system an elevated look. Work surface - Made of 25 mm thick pre-laminated particle board confirming to IS:12823 interior grade with post forming on front only of size 900 mm w x 600 mm d. Note: All partitions and side panels have leveling screws for adjustment in case of Uneven floor to take care of +/- 20 mm of uneven flooring. Raceway:-The raceways are made out of 0.8mm thick CRCA & powder coated. The electrical raceway can be provided below worktop or above worktop, these are hook on type which will be mounted on the verticals. The skirting/data raceway is hollow and will be mounted on the raceway channels CPU trolley Fixed Type: CPU Trolley: the metal Tray is made of 1.0 mm thick CRCA Sheet and Side support is made of 0.8 mm thick CRCA Sheet. On Wall Side (With common side partition sharing)

Back to Back (With Common side partition as well as common central)

Chairs for Lab-Clerk-Computer without arm revolving: Specifications: Providing, supply and placing the seat and back is made up of 12mm thick (7 layers) hot pressed plywood/PVC frame moulded in polyurethane foam of density 45±2kg/m3. The dimensions of seat shall be minimum 45.0cm(W) x 42.0cm.(D)and of back shall be 40.0cm(W) x 47.0cm.(H). The seat and back covers shall be injection moulded in black Co-polymer Polypropylene. The back ply and foam is designed with contoured lumber support for achieving comfortable seating posture. The HR polyurethane foam shall be moulded with density.=45±2.kg/m3 and hardness load 16±2 kgf as per IS:7888.for 25% compression. The permanent contact mechanism shall be designed with 360° revolving type, 14±2°maximum back tilt only, Upright position locking, Tilt tension adjustment. The pneumatic height adjustment shall has an adjustment stroke of 11.0 ±0.3cm. The bellow shall be 3 piece telescopic type and injection moulded in black Polypropylene. The pedestal shall be injection moulded in black 30% glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal shall be 62.0 ±0.5cm. pitch-centre dia. (72.0 ±1.0cm with castors). The twin wheel castors shall be injection moulded in Black Nylon. Overall Dimensions of Chair shall be Seat Height - min 43.0 to max 54.0cm, Height - min87.5 to max 98.5cm, Width & Depth of Chair as measured from pedestal - Width-71.0 cm and Depth-71.0 cm. Gas Lift: Gas lift pipe diameter 50mm and has an Height adjustment stoke of 110mm.

Supply and installation of Line Programmer Computer labs Specifications: TABLE 1500W X 750D X 750H Providing and placing table 1500w x 750d x 750h DESK based modular workstation with System ht - 750mm. UNDERSTRUCTURE: Made of ERW Pipe 50 x 50 x 1.6mm thick duly powder coated with 50-60 micron. Comprising of metal powder coated L connectors between legs, legs made up of metal powder coated finish and the entire assemply is fixed to the worktop with the help of ABS plastic spacers 20 mm high which gives the floating look to the w/s module. Wire Management : Metal powder coated Cable pole of size 170mm w x 85 mm d x 705 mm ht is given to pull wires from the floor junction box upto the power box fixed under neath the worktop. Aluminium access flaps on worktop above power box cut out for accessing switches. To carry wires forward through w/s mesh type wire carrier assembly is provided below worktops. MODESTY PANELS - 25 MM THK PLB modesty x 450 mm wide. Work surface - out of 25 mm thk prelam particle board with flat pvc lipping edge banding of size 1500W X 750D X 750H