Chaudhary Ranbir Singh University Tender

LT-01 - LUNCH TABLE - 1200 x 750 x 750mm(H) Providing and placing teak wood lunch table. Table top shall have 4mm thick decorative teak veneer over 25mm (19 + 6mm) thick commercial ply with 3mm thick teak wood lipping made to shape as per drawing and teak wood square tapered wooden legs (125 x 125 mm at top and 50 x 50 mm at bottom), all exposed wooden/veneer work shall be finished in PU Polish, complete in all respects to be manufactured strictly as per Drawing No. FR-03.

CT-01 - CENTRE TABLE - 1200 x 1200 x 525mm(H) Providing and placing 12mm thick toughened glass top centre table supported on teak wood frame made to shape as per drawing. Glass top will have 65mm wide ceramic white paint band. Wood members shall be finished in PU polish, complete in all respect to be manufactured strictly as per Drawing No. FR-03

ROUND TABLE - 400mm Dia x 525mm(H) Providing and placing 12mm thick toughened glass top corner table supported on teak wood frame made to shape as per drawing. Glass top will have 38mm wide ceramic white paint band. Wood members shall be finished in PU polish, complete in all respect to be manufactured strictly as per Drawing No. FR-04.

LT-02 LUNCH TABLE - 900 x 900 x 750mm(H) Providing and placing teak wood lunch table. Table top shall have 4mm thick decorative teak veneer over 25mm (19 + 6mm) thick commercial ply with 3mm thick teak wood lipping made to shape as per drawing and teak wood square tapered wooden legs (125 x 125 mm at top and 50 x 50 mm at bottom), all exposed wooden/veneer work shall be finished in PU Polish, complete in all respects to be manufactured strictly as per Drawing No. FR-05.

T-02 Executive Table- Supply and Placing Main Table with Extended Return Unit. Main Table of Size 1800mmW x 1200mmD x 750mmH with top made of 36mm thick MDF board. Extended Return Unit size 1200mmL X 450mmD X 675mmH. The Table top and Gabland are made out of 36mm thk MDF with 2mm thk pvc edge banding & side panel & modesty panel are made up of 25mm MDF. The working edges shall be provided with machine pressed 2mm thick PVC edging using special hot melt glue at hot temperature. The table have a provision of Side Storage of size 1200mm L x 450mm D x 675mm Ht., Storage Top are made out of 25mm thick MDF and rest all storage to be made out of 18 mm thick MDF . All exposed edges shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue.Side Storage having a provision of 3 drawer unit of size: 400mm(L) x 450mm(D) x 650mm(H). Pedestal Unit have a combination of 2 drawer & one filing drawer. The pedestal storage unit shall be made of 18 mm thick MDF with provision of central Locking arrangement. Reference Image No. 1

T-02 STAFF TABLE - 1500 X 900 X 750mm(H) + 1200 X 600 X 750mm(H) Providing and placing of table fabricated out of 19mm/12mm/6mm thick commercial ply, having 19 mm thick commercial ply table top laminated with 1.0mm thick laminate and 3mm thick teak wood lipping made to shape as per drawing & shall be finished in PU Polish with keyboard drawer made of 1.0mm thick laminate over 12mm thick commercial ply and teak wood edging made to shape. The drawers shall be fitted with drawer slides, handles, locks etc., shutters shall be fitted with self closing hinges, magnetic catchers, handles, locks of approved make. Storage unit fabricated out of 19mm thick commercial ply finished with 0.8mm thick laminate of approved make & shade on internal surfaces, all exposed edges shall be lipped with teak wood lipping. External vertical surfaces of storage units as well as tables shall have 1.0mm thick laminate, complete in all respect with accessories, all exposed wooden/veneer work shall be finished in PU Polish, complete in all respects and to be manufactured as per Reference Image no. 5

CT-02 CENTRE TABLE - 1200 x 680 x 525mm(H) Providing and placing 12mm thick toughened glass top centre table supported on teak wood frame made to shape as per drawing. Glass top will have 65mm wide ceramic white paint band. Wood members shall be finished in PU polish, complete in all respect to be manufactured strictly as per Drawing No. FR-04.

COMPUTER TABLE - Supplying & Placing computer desk with an overall size 900mm(W) X 750mm(D) X 750mm(H). It should have work top made up of 25mm thick Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. The top profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree celsius. The top board shall be supported on fixed pedestal at one end and fixed CPU unit at another end. The desk shall be clad with 18mm thick modesty panel which provide structural support for the desk. The modesty panel shall have the size 690mm X 600mm with 18mm thick pre-laminated particle board connected with both end. 18mm thick pre-laminated board base keyboard tray shall be provided with an overall size 684mm X 350mm. The keyboard trey shall be operated by sliding channel to enable smooth operation. A fixed pedestal shall be provided with the size 400mm X 620mm X 725mm at one end with 3 drawer operated on roller channel and 1 filing drawer operated on ball bearing channel. All drawer shall be operated with SS handle with multi-purpose (MP) locking mechanism. Other side of table open type storage shall be provided with the size 400mm X 600mm X 725mm having one adjustable shelf to accumulate CPU. Complete understructure made in 18mm thick Pre-laminated particle board with appropriate edge banding and drawer base shall be 9mm thick. To protect the wall from kicks, abrasion and serve as a decorative moulding skirting shall be provided at bottom of the pedestal at both sides. Reference image no. 8

T-01 - CAFETERIA TABLES - 1800 x 750 x 750mm(H) Providing and placing Cafeteria Tables comprising 19mm thick Pre-polished granite (Jet Black) top with edges moulded over 19mm thick commercial ply, supported on SS-304G frame of 75x75mm, 50x50mm (16 gauge) Square Pipes complete in all respects and to be manufactured strictly as per Drawing no - FR-10.

T-02 - CAFETERIA TABLES - 900 x 900 x 750mm(H) Providing and placing Cafeteria Tables comprising 19mm thick Pre-polished granite (Jet Black) top with edges moulded over 19mm thick commercial ply, supported on SS-304G frame of 75x75mm, 50x50mm (16 gauge) Square Pipes complete in all respects and to be manufactured strictly as per Drawing no -FR-10.

R-01 - RUNNER TABLE -12000 x 400 x 375mm(H) (Wall Hung) Providing and fixing Runner Table comprising 19mm thick Pre-polished granite (Jet Black) top with edges moulded over 19mm thick commercial ply, supported on SS-304G brackets of 50x100mm (16 gauge) Rectangular Pipe fixed to wall with anchor fastners complete in all respects and to be manufactured strictly as per Drawing no -FR-11.

R-02 - RUNNER TABLE - 10000 x 400 x 375mm(H) (Wall Hung) Providing and fixing Runner Table comprising 19mm thick Pre-polished granite (Jet Black) top with edges moulded over 19mm thick commercial ply, supported on SS-304G brackets of 50x100mm (16 gauge) Rectangular Pipe fixed to wall with anchor fastners complete in all respects and to be manufactured strictly as per Drawing no -FR-11.

T-05 - CAFETERIA TABLES - 1350 x 750 x 750mm(H) Providing and placing Cafeteria Tables comprising 19mm thick Pre-polished granite (Jet Black) top with edges moulded over 19mm thick commercial ply, supported on SS-304G frame of 75x75mm, 50x50mm (16 gauge) Square Pipes complete in all respects and to be manufactured strictly as per Drawing no -FR-10.

VC CHAIR Providing and placing a high back revolving chair with ergonomic design, comfortable & aesthetically appealing. The seat shall be made of 15mm thick hot pressed commercial plywood padded with high resilience polyurethane foam minimum 50mm thick having density 40kg/m³ and the back shall be made of (15+6)mm thick double layered moulded plywood padded with high resilience polyurethane foam minimum 40mm thick having density 40kg/m³. The same shall be upholstered with leatherite tapestry 1mm thick. The backrest shall be made by keeping the natural curvature of the spine which helps to provide lumbar support & full back support as well as head support. The chair shall be supplied with cushion arm with leatherite covering top completely joint with seat and back. For seating durability the chair shall have, Synchronized knee tilt 360 degree revolving mechanism having four position locking and tilt tension adjustment with anti-shock feature which provides back strength for the chair. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 65mm with gas-lift to suit them using the lever under the seat. The Pedestal should have five legged made of Die-cast Aluminium having pitch circle dia. 640 mm fitted with 5 nos. twin wheel castors. The seat size shall be 515±10 mm (D) X 600±10 mm(W) and back size shall be 600±10 mm(W) X 790±10 mm(H) from seat. Overall height shall be = 1210±10 mm, overall depth/width = 740±10 mm complete in all respect to be manufactured strictly as per Reference Image no .9

VISITORS' CHAIRS Providing and placing static visitor chair with ergonomic design for user comfort & aesthetically appealing. The seat shall be made of 15mm thick hot pressed commercial plywood padded with high resilience polyurethane foam minimum 50mm thick having density 40kg/m³ and the back shall be made of (15+6)mm thick double layered moulded plywood padded with high resilience polyurethane foam minimum 40mm thick having density 40kg/m³. The same shall be upholstered with leatherite tapestry 1mm thick. The backrest shall be made by keeping the natural curvature of the spine for back support. The chair shall be supplied with cushion arm with leatherite covering top and seat and back shall be arrested together with powder coated HR steel spine. The frame structure shall be cantilever support type made of MS CRCA chrome plated capsule pipe of size 40mm X 20mm with 1.6mm thick. There shall be PPCP shoe provided at the base to avoid scratches on the floor. The seat size shall be 510±10 mm(D) X 500±10 mm(W) and back size shall be 500±10 mm(W) X 520±10 mm(H) from seat. Overall height shall be = 990±10 mm, overall depth = 660±10 mm & overall width = 680±10 mm complete in all respect to be manufactured matching as per Reference Image no .9

DINING CHAIRS Providing and placing static teak wood dining chair. The dimensions of chair should be 460mm(W) x 520mm(D). The seat shall be made up of teak wood and upholstered with fabric of minimum 350 GSM and in the range of Rs 700 - 800 per metre over moulded polyurethane foam. The moulded polyurethane foam shall be of density [45-55](+/-)2kg/m ³, and hardness load 16(+/-) 2kgf as per IS:7888 for 25% compression. The back and legs shall be made up of teak wood wood, all exposed wood/veneer work shall be finished in PU Polish, complete in all respect to be manufactured strictly as per Drawing No. FR-03.

REGISTRAR CHAIR Providing and placing a high back revolving chair with ergonomic design, comfortable & aesthetically appealing. The seat shall be made of 15mm thick hot pressed commercial plywood padded with high resilience polyurethane foam minimum 50mm thick having density 40kg/m³ and the back shall be made of (15+6)mm thick double layered moulded plywood padded with high resilience polyurethane foam minimum 40mm thick having density 40kg/m³. The same shall be upholstered with leatherite tapestry 1mm thick. The backrest shall be made by keeping the natural curvature of the spine which helps to provide lumbar support & full back support as well as head support. The chair shall be supplied with cushion arm having leatherite covering top. For seating durability the chair shall have synchronized knee tilt 360 degree revolving mechanism having four position locking and tilt tension adjustment with anti-shock feature which provides back strength for the chair. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 65mm with gas-lift to suit them using the lever under the seat. The Pedestal should have five legged MS CRCA chrome plated having pitch circle dia. 640 mm fitted with 5 nos. twin wheel castors. The seat size shall be 515±10 mm(D) X 560±10 mm(W) and back size shall be 560±10 mm(W) X 720±10 mm(H) from seat. Overall height shall be = 1155±10 mm, overall depth/width= 760±10 mm complete in all respect to be manufactured strictly as per Reference Image no. 9.

VISITORS' CHAIRS Providing and placing static visitor chair with ergonomic design for user comfort & aesthetically appealing. The seat shall be made of 15mm thick hot pressed commercial plywood padded with high resilience polyurethane foam minimum 50mm thick having density 40kg/m³ and the back shall be made of (15+6)mm thick double layered moulded plywood padded with high resilience polyurethane foam minimum 40mm thick having density 40kg/m³. The same shall be upholstered with leatherite tapestry 1mm thick. The backrest shall be made by keeping the natural curvature of the spine for back support. The chair shall be supplied with cushion arm with leatherite covering top and seat and back shall be arrested together with powder coated HR steel spine. The frame structure shall be cantilever support type made of MS CRCA chrome plated capsule pipe of size 40mm X 20mm with 1.6mm thick. There shall be PPCP shoe provided at the base to avoid scratches on the floor. The seat size shall be 510±10 mm(D) X 500±10 mm(W) and back size shall be 500±10 mm(W) X 520±10 mm(H) from seat. Overall height shall be = 990±10 mm, overall depth = 660±10 mm & overall width = 680±10 mm complete in all respect to be manufactured strictly as per Reference Image no. 9.

Executive Chair Providing and placing medium back revolving chair. The overall dimensions of the chair shall be 76.1cm x 76.1cm x (98.6-116.1cm). The seat height shall be 44.5cm-54.5cm. The cushioned seat and back is made of injection moulded Plastic outer and Inner. Plaster inner is upholstered with stitched cover and moulded high Resilience Polyurethane foam of density 45kg per meter cube. The stitched cover is made from spacer fabric and leatherette. Seat size shall be 560mm (W) x 480mm (H). The Back size shall be 560 mm(W) x 600mm (H). The armrests top is moulded from PU and mounted on to a drop lift adjustment type tubular armrest support made of 3.8cm diameter x 0.2cm thick MS ERW tube. The armrest height is adjustable uptp 6.5cm in 5 steps. The armrest structure is powder coated upto 40-60 microns. It shall have active bio synchro mechanism with features like 360 degree revolving, front pivot tilt mechanism, tilt tension adjustment, 5-position tilt limiter, etc.. Seat depth adjustment is integrated in the seat through a sliding mechanism. Seat depth adjustment range is 6cm. It shall also have adjustable back support. Back frame is connected to Up/Down mechanism housed in plastic T spine. It can be adjusted fro 7.2cm for comfortable back support to suit individual need. The pneumatic height adjustment has an stroke of 10cm. The pedestal is to be injection moulded in black 33 % glass filled Nylon 66 and fitted with 5 nos. of twin wheel castors. The pedestal is 66cm pitch center dia complete in all respects as per Drawing. Reference Image No. 2

VISITORS' CHAIR (with Arm Rest) Supply and Placing Upholstered with fabric, High resilience polyurethane foam, Fixed type mechanism, Tubular frame. Back: (W) 39.0 cm x (H) 38.0cm, Seat: (W)45.0cm x (D) 42.0cm Overall Dimensions of Chair Scat Height -45.0cm. Height -81.5cm. Width & Depth of Chair as measured from pedestal - Width-56.0 cm and Depth-54.0 cm. The seat shall be made from 1.2 +/- 0.1cm. thk. hot pressed plywood and back shall be injection moulded from black Co-polymer Polypropylene upholstered with fabric and moulded Polyurethane foam together with seat and back covers. The back foam shall be designed with contoured lumbar support for extra comfort. The dimensions of seat shall be 45.0cm (W) x 42.0cm. (D) and of back shall be 39.0cm(W) x 38.0cm (H). The seat and back covers shall be injection moulded in black Co-polymer polypropylene. The HR polyurethane foam shall be moulded with density 45 +/-2 kg/m3 and hardness load 162 kgf as per IS:7888 for 25% impression. The fixed type mechanism shall be without back tilt. The tubular frame shall be made up of dia 2.54 ±0.03cm. x 0.2 +0.016cm.thk. M.SER.W. tube and black powder coated (DFT 40-60 microns). The overall dimensions of chair shall be Seat Height - 45.0cm, Height -81.5cm, Width & Depth of Chair as measured from pedestal - Width-56.0 cm and Depth-54.0 cm. Reference Image No. 3

STAFF CHAIR Supply and Placing Upholstered with fabric, High resilience polyurethane foam, Revolving type mechanism, Tubular frame. Back: (W) 39.0 cm x (H) 38.0cm, Seat: (W)45.0cm x (D) 42.0cm Overall Dimensions of Chair Scat Height -45.0cm. Height -81.5cm. Width & Depth of Chair as measured from pedestal - Width-56.0 cm and Depth-54.0 cm. The seat shall be made from 1.2 +/- 0.1cm. thk. hot pressed plywood and back shall be injection moulded from black Co-polymer Polypropylene upholstered with fabric and moulded Polyurethane foam together with seat and back covers. The back foam shall be designed with contoured lumbar support for extra comfort. The dimensions of seat shall be 45.0cm (W) x 42.0cm. (D) and of back shall be 39.0cm(W) x 38.0cm (H). The seat and back covers shall be injection moulded in black Co-polymer polypropylene. The HR polyurethane foam shall be moulded with density 45 +/-2 kg/m3 and hardness load 162 kgf as per IS:7888 for 25% impression. The fixed type mechanism shall be without back tilt. Additional comfort and support are provided by the fixed arms, active tilt with lock, and push-back mechanism. With easy, raise the chair’s height by 100mm. The chair’s 50mm castors, 360-degree swivel, and solid nylon base make for simple movement. The pedestal is injection moulded in black 33 % glass filled Nylon 66 and fitted with 5 nos. of twin wheel castors. Reference Image no. 6

CH-01 - CAFETERIA CHAIR Providing and placing cafeteria chair with arms as per reference image. The seat and back made up of virgin knitted plastic polypropylene. Plastic polypropylene square legs and epidium leg bushes to avoid scratches on delicate floor, capable to take 200 kg weight of vertical load complete in all respects and to be manufactured strictly as per Drawing no -FR-11.

CH-02 - CAFETERIA HIGH CHAIR Providing and placing cafeteria high chair with 1.0mm laminate over 19mm thick commercial ply in seat and 1.0mm laminate over 12mm thick commercial ply in back supported on teak wood frame made to shape as per drawing. Wood members shall be finished in French polish, complete in all respect to be manufactured strictly as per Drawing no -FR-11.

CH-01 - CAFETERIA CHAIR Providing and placing cafeteria chair with arms as per reference image. The seat and back made up of virgin knitted plastic polypropylene. Plastic polypropylene square legs and epidium leg bushes to avoid scratches on delicate floor, capable to take 200 kg weight of vertical load complete in all respects and to be manufactured strictly as per Drawing no -FR-11.

THREE SEATER SOFA - (Clear Seat 1800 x 580mm), (Overall size 2400 x 810mm) Providing and placing fully upholstered three seater sofa with 100mm thick rubber cushion in seat and 75mm thick high density foam in back of approved make fabricated out of teak wood members. The seat and back shall be provided with Coil & S-Spring. The fabric used shall be of minimum 350 GSM and in the range of Rs 700 - 800 per metre. All exposed wooden members shall be finished in PU Polish, complete in all respect to be manufactured matching as per Drawing No. FR-04.

SINGLE SEATER SOFA - (Clear Seat 600 x 580mm), (Overall size 1200 x 810mm) Providing and placing fully upholstered single seater sofa with 100mm thick rubber cushion in seat and 75mm thick high density foam in back of approved make fabricated out of teak wood members. The seat and back shall be provided with Coil & S-Spring. The fabric used shall be of minimum 350 GSM and in the range of Rs 700 - 800 per metre. All exposed wooden members shall be finished in PU Polish, complete in all respect to be manufactured strictly as per Drawing No. FR-04.

TWO and a HALF - SEATER SOFA - (Clear Seat 1600 x 580mm), (Overall size 1900 x 780mm) Providing and placing fully upholstered two and a half-seater sofa with 100mm thick rubber cushion in seat and 75mm thick high density foam in back of approved make fabricated out of teak wood members. The seat and back shall be provided with Coil & S-Spring. The fabric used shall be of minimum 350 GSM and in the range of Rs 700 - 800 per metre. All exposed wooden members shall be finished in PU Polish, complete in all respect to be manufactured strictly as per Drawing No. FR-05.

TWO SEATER SOFA - (Clear Seat 1250 x 580mm), (Overall size 1550 x 780mm) Providing and placing fully upholstered two seater sofa with 100mm thick rubber cushion in seat and 75mm thick high density foam in back of approved make fabricated out of teak wood members. The seat and back shall be provided with Coil & S-Spring. The fabric used shall be of minimum 350 GSM and in the range of Rs 700 - 800 per metre. All exposed wooden members shall be finished in PU Polish, complete in all respect to be manufactured strictly as per Drawing No. FR-05.

THREE SEATER SOFA - (Clear Seat 1800 x 580mm), (Overall size 2400 x 810mm) Providing and placing fully upholstered three seater sofa with 100mm thick rubber cushion in seat and 75mm thick high density foam in back of approved make fabricated out of teak wood members. The seat and back shall be provided with Coil & S-Spring. The fabric used shall be of minimum 350 GSM and in the range of Rs 700 - 800 per metre. All exposed wooden members shall be finished in PU Polish, complete in all respect to be manufactured as per Reference Image no. 7

SINGLE SEATER SOFA - (Clear Seat 600 x 580mm), (Overall size 1200 x 810mm) Providing and placing fully upholstered single seater sofa with 100mm thick rubber cushion in seat and 75mm thick high density foam in back of approved make fabricated out of teak wood members. The seat and back shall be provided with Coil & S-Spring. The fabric used shall be of minimum 350 GSM and in the range of Rs 700 - 800 per metre. All exposed wooden members shall be finished in PU Polish, complete in all respect to be manufactured as per Reference Image no. 7

4 - SEATER SOFA - (Clear Seat 2400 x 580mm), (Overall size 3000 x 810mm) Providing and placing fully upholstered four seater sofa with 100mm thick rubber cushion in seat and 75mm thick high density foam in back of approved make fabricated out of teak wood members. The seat and back shall be provided with Coil & S-Spring.The fabric used shall be of minimum 350 GSM and in the range of Rs 700 - 800 per metre. All exposed wooden members shall be finished in PU Polish, complete in all respect to be manufactured strictly as per Drawing No. FR-02.

SINGLE SEATER SOFA - (Clear Seat 600 x 580mm), (Overall size 1200 x 810mm) Providing and placing fully upholstered single seater sofa with 100mm thick rubber cushion in seat and 75mm thick high density foam in back of approved make fabricated out of teak wood members. The seat and back shall be provided with Coil & S-Spring. The fabric used shall be of minimum 350 GSM and in the range of Rs 700 - 800 per metre. All exposed wooden members shall be finished in PU Polish, complete in all respect to be manufactured strictly as per Drawing No. FR-02.

THREE SEATER SOFA - (Clear Seat 1875 x 580mm), (Overall size 2335 x 810mm) Providing and placing fully upholstered three seater sofa with 100mm thick rubber cushion in seat and 75mm thick high density foam in back of approved make fabricated out of teak wood members. The seat and back shall be provided with Coil & S-Spring. The fabric used shall be of minimum 350 GSM and in the range of Rs 700 - 800 per metre. All exposed wooden members shall be finished in PU Polish, complete in all respect to be manufactured strictly as per Drawing No. FR-03.

TWO SEATER SOFA - (Clear Seat 1250 x 580mm), (Overall size 1710 x 810mm) Providing and placing fully upholstered two - seater sofa with 100mm thick rubber cushion in seat and 75mm thick high density foam in back of approved make fabricated out of teak wood members. The seat and back shall be provided with Coil & S-Spring. The fabric used shall be of minimum 350 GSM and in the range of Rs 700 - 800 per metre. All exposed wooden members shall be finished in PU Polish, complete in all respect to be manufactured strictly as per Drawing No. FR-03.

DAY BED - 2000 x 830mm Overall Providing and placing teak wood day bed as per Isometric drawings with 100mm thick rubber cushion in seat and 75mm thick high density foam in back of approved make fabricated out of teak wood members. The fabric used shall be of minimum 350 GSM and in the range of Rs 700 - 800 per metre. All exposed wooden members shall be finished in PU Polish, complete in all respect to be manufactured strictly as per Drawing No. FR-03 & 05.

EASY SOFA CHAIR Providing and placing teak wood single seater easy sofa chair with 100mm thick rubber cushion in seat and 75mm thick high density foam in back of approved make fabricated out of teak wood members. The fabric used shall be of minimum 350 GSM and in the range of Rs 700 - 800 per metre. All exposed wooden members shall be finished in PU Polish, complete in all respect to be manufactured strictly as per Drawing No. FR-02.

OHS-01 OVER HEAD STORAGE - 1200 x 400 x 850mm(H) (Wall Mounted) Providing and placing over-head storage Unit fabricated out of 19mm/ 12mm/ 6mm thick commercial ply complete in all respect as per drawing, Shutters/drawers shall be fitted with Soft closing hinges/drawer slides, handles, locks etc., magnetic catchers, external exposed surfaces shall be finished with 1.0mm thick laminate and all internal surfaces and back with 0.8mm thick laminate. Shutters to be fabricated out of 19mm thick commercial ply finished with 1.0mm thick laminate, all exposed wooden/veneer work shall be finished in PU Polish, complete in all respect to be manufactured strictly as per Drawing No. FR-08.

OHS-02 OVER HEAD STORAGE - 1800 x 400 x 850mm(H) (Wall Mounted) Providing and placing over-head storage Unit fabricated out of 19mm/ 12mm/ 6mm thick commercial ply complete in all respect as per drawing, Shutters/drawers shall be fitted with Soft closing hinges/drawer slides, handles, locks etc., magnetic catchers, external exposed surfaces shall be finished with 1.0mm thick laminate and all internal surfaces and back with 0.8mm thick laminate. Shutters to be fabricated out of 19mm thick commercial ply finished with 1.0mm thick laminate, all exposed wooden/veneer work shall be finished in PU Polish, complete in all respect to be manufactured strictly as per Drawing No. FR-08.

OHS-03 - OVER HEAD STORAGE - 2400 x 400 x 850mm(H) (Wall Mounted) Providing and placing over-head storage Unit fabricated out of 19mm/ 12mm/ 6mm thick commercial ply complete in all respect as per drawing, Shutters/drawers shall be fitted with Soft closing hinges/drawer slides, handles, locks etc., magnetic catchers, external exposed surfaces shall be finished with 1.0mm thick laminate and all internal surfaces and back with 0.8mm thick laminate. Shutters to be fabricated out of 19mm thick commercial ply finished with 1.0mm thick laminate, all exposed wooden/veneer work shall be finished in PU Polish, complete in all respect to be manufactured strictly as per Drawing No. FR-08.

ST-01 - STORAGE UNIT - 1200 x 450 x 750mm(H) Providing and placing storage unit fabricated out of 19mm/ 12mm/ 6mm thick commercial ply, teak wood skirting, shelves made of 19mm thick commercial ply complete in all respect as per drawing, storage shall comprise of 2 rows of filing drawers, drawers shall be fitted with drawer slides, handles, locks etc., magnetic catchers, external exposed surfaces shall be finished with 1.0mm thick laminate and all internal surfaces and back with 0.8mm thick laminate. Shutters to be fabricated out of 19mm thick commercial ply finished with 1.0mm thick laminate, all exposed wooden/veneer work shall be finished in PU Polish, complete in all respect to be manufactured strictly as per Drawing No. FR-08.

SA - STEEL ALMIRA - 900 x 500 x 1980mm(H) Providing, supplying and placing steel almirah in perfectly upright and straight position. The overall size of the almirah shall be 900mm (W) X 500mm (D) X 1980mm (H) including legs. It should be supplied with 4 nos. of adjustable shelves i.e. 5 loading compartments. Door shall be made of 1mm thick and all other components shall be made of 0.8mm thick high yield strength CRCA sheet of grade 'D' confirming to IS: 513. Stiffeners shall be provided in shelf & door. The steel hinged door shall be provided with locking mechanism which is assembled with bolt arrangement. The shelves shall have folded constructions which have intrinsic rigidity and high load carrying capacity. Uniformly distributed load capacity per each shelf shall be 40kg maximum. The complete steel structure shall be constructed by welding and provide finishing with epoxy polyester powder coated to be thickness 40-60μ complete in all respect sand to be manufactured strictly as per Drawing. Reference Image No. 4

LCDU-01 - LCD UNIT - 1500 x 300 x 300mm(H) (Wall Hung) Providing and fixing LCD unit (excluding LCD) fabricated out of 4mm thick decorative teak veneer over 19mm thick commercial ply finished in PU Polish with 12mm thick toughened glass on top of 150mm length and 300mm width, and all exposed wooden/veneer work shall be finished in PU Polish, complete in all respects and to be manufactured strictly as per design and Drawing No. FR-03.

COAT STAND Providing and placing coat stand made of teak wood as per image and drawing shall be finished in PU Polish, complete in all respect to be manufactured strictly as per Drawing No. FR-03.

T-03 - SERVICE COUNTER - 1800 x 700 x 1200mm(H) Providing and placing Service Counter fabricated out of 19mm thick commercial ply, 1.5mm thick SS-304G perforated sheet in shelves press bent as per profile shown in the drawing. Work Top and Service Top shall have 19mm thick Pre-polished granite (Jet Black) with edges moulded. Front shall have 1mm thick Laminate over 19mm thick commercial ply and all internal surfaces shall finished with 0.8mm thick laminate. The Unit shall be supported on Four (4) Nos. 38x38x100mm(h) made from 18 Gauge SS-304G pipe feet. Ends of 19mm thick plywood(s) shall have 3mm thick teakwood lipping finished with French polish complete in all respects and to be manufactured strictly as per Drawing no -FR-10.

T-04 - CASHIER COUNTER - 1800 x 700 x 1200mm(H) Providing and placing Cashier Counter fabricated out of 19mm thick commercial ply. Work Top and Service Top shall have 19mm thick Pre-polished granite (Jet Black) with edges moulded. Front shall have 1mm thick Laminate over 19mm thick commercial ply and all internal surfaces shall finished with 0.8mm thick laminate. The Unit shall be supported on Four(4) no. 38x38x100mm(H) feet made of 18 Gauge SS-304G Square Pipe. The Unit shall have One(1) no. Under-Desk CPU Holder, Keyboard Tray and Two(2) no. 150mm deep Cash Drawers with self locking facilities. Ends of 19mm thick plywood(s) shall have 3mm thick teakwood lipping finished with French polish complete in all respects and to be manufactured strictly as per Drawing no -FR-10.

FS-01 - CAFETERIA FIXED SEATING - 4000 x 550 (Wall Hung) Providing and fixing Cafeteria Fixed Seating comprising 50mm thick Leatherite Seat cushion with high density PU foam over 19mm thick commercial ply, supported on SS-304G brackets of 50x100mm(16 gauge) Rectangular Pipe fixed to wall with anchor fastners complete in all respects and to be manufactured strictly as per Drawing no -FR-11.

68 mm thick WOODEN PARTITION - (OPAQUE UPTO 1200mm + 8 mm Toughened Glass 450mm HIGH) Providing and fixing 68 mm thick double skin wooden partition made out of 1mm thick Laminate over 8mm thick commercial ply on both sides fixed over 50x50mm (16 gauge) raw aluminum frame @ 600mm c/c vertically & horizontally. The aluminum frame shall be fixed rigidly to 150x150mm imported teak wooden members. All exposed wood shall be finished with French Polish after proper surface preparation as per manufacturer's specifications. The partition shall be measured upto 1650mm multiplied by length after deducting entry/opening. For the purpose of measurement meaning that the cost of Vertical imported teak wood members running upto ceiling height shall not be paid for separately but shall be absorbed in the partition rate complete in all respects and to be manufactured strictly as per Drawing no -FR-11.

Poker (wooden back), supreme quality 6"

Poker Big Size, supreme quality, 12"

Punch Big

Punching Machine (Double hole)

Register 2 Quire, 192 pages

Register 4 Quire, 384 pages

Register 6 Quire, 576 pages

Register 8 quire, 768 pages

Sketch Pen (Black)

Stappler Big, Kangaro HP-45 or equivalent (24/6)

Stappler Pin Big Kangaro Blue

Stappler Small Kangaro

Sticker for DMC

Stock Register

Tag Big 12"

Tag Small 6"

Tape Dispenser ( 2" and 4")

White Fluid

Record File (Plastic)