Chaudhary Devi Lal University Tender

11.71) Wall painting on a cement plaster surface with acrylic emulsion paint of approved brand and manufacture to give an even shade : 11.71.1) Two or more coats on new work

6.34) Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect above plinth level. 6.34.6) Thermo-Mechanically Treated bars of grade Fe-500D or more

6.30) Centering and shuttering including strutting, propping etc. and removal of form for 6.30.4) Shelves (Cast in situ)

6.16) Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor four level, excluding the cost of centering, shuttering, finishing and reinforcement with 1: 1.5:3 (1 cement : 1.5 coarse sand(zone-111) : 3 graded stone aggregate 20 mm nominal size).

8.26) Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platfonns, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1 :4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. 8.26.2) Granite of any colour and shade 8.26.2.2) Area of slab over 0.50 sqm

8.27) Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. 8.27.2) Granite work

8.28) Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platfonn, vanity counter and similar location in marble/ Granite/stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

32.47) Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance i!: 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main 'T'. The system should rest on periphery walls/partitions with the help of GI perimeter wall angle of size 24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge. 32.47.1) With 16 mm thick bevelled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6

12.157) Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : 12.157.1) For fixed portion 12.157.1.1) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

8.32) Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: (a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metallic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. (c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip sqm Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium items. The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item , as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminium Composite Panel Cladding (including width of groove) shall be measured in sqm up to two decimal places.

NS) Providing and fixing 12mm thick WPC Board and high tear strength flocked fabric velvat with the help of silicon & double tape supported of Alunium tubes of 1" x 1.6mm thick @ 600mm c/c both ways. The work should be complete in all respect. The rate include for work done at all heights including scaffolding, labour, cartage & transportation etc., all accessories required for proper fixing of pinup board as per shound Engineering Practices, all taxes, levies etc. complete in all respects up to the entire satisfaction of the E.I. C. (Payment of Aluminium Tubes to be made Extra.)

NS) Supply and Fixing of 12mm S.S Channel Heavy Duty for Shelves with necessary screws complete in all respect.

NS) Supply and Fixing of 14" long SS brackets for holding 8mm thick toughnet glass shelves with necessary screws etc complete in all respect.

NS) Supply and Placing 8mm thick toughned glass shelves of size 24" x 16" with round edge complete in all respect.

PH Work 22.85) Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 22.85.2) 20 mm nominal outer dia Pipes

22.222) Providing and fixing in position single socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. 22.222.2) Single Socket Type B 22.222.2.4) 75mm old SWR UPVC pipe lines laid complete

22.10) Providing and fixing Stainless Steel A ISi 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required 22.10.2) Kitchen sink without drain board 22.10.2.1) 610x510 mm bowl depth 200 mm

22.82) Cutting holes up to 30 x 30 cm in walls including making good the same: 22.82.1) With common burnt clay non-modular bricks

22.20) Providing and fixing in position C.I. plain Nahani Trap conforming to I.S.I. specifications and of self-cleaning design with C.P. brass hinged grating with frame complete 22.20.2) With 75 mm internal diameter outlet

22.14) Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 22.14.2) Flexible pipe 22.14.2.1) 32 mm dia

22.8) Providing and fixing 15 mm C.P. brass Laboratory cock swan neck of best quality (to the approval of Engineer-in-charge). 22.8.1) One way

22.127) Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.

22.123) Providing and fixing PTMT grating of approved quality and colour. 22.123.1) Circular type 22.123.1.1) 100 mm nominal dia

22.108) Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 22.108.1) 15mm nominal bore

22.101) Providing and fixing Un-plasticised PVC connection pipe with brass unions: 22.101.1) 30 cm length 22.101.1.1) 15 mm nominal bore

EI work NS 1)Supply Installation testing and Commissioning of wall mounted split air conditioner with Inverter technology (variable speed) having capacity 1.5 TR (5 star) for copper coil material with 1 year warranty on machine and 10 year on compressor complete in all respect as per engineer in charge Make- Hitechi, O-general, Carrier, Daiken

NS 2) Supply Installation testing and Commissioning of automatic voltage corrector or step type auto transformer having capacity 4 KVA with digital voltmeter and selector switch, wall mounting with 1 year warranty. Make micotek, Powerguard, V-guard