Chaudhary Charan Singh Haryana Agricultural University Tender

[10.60]Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. [Through Rate]

[10.62]Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. [Through Rate]

[10.63.2]Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. 2. Size of Tile 600x600 mm [Through Rate]

[10.67.2]Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement and matching pigments etc. complete. 2. Size of Tile 600x600 mm [Through Rate]

[10.70.2]Extra for grouting the joints of floor tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. 2. Size of Tile 600x600 mm [Through Rate]

[10.72]Deduct for not grouting the joints with white cement and matching pigment in the items of fixing of vitrified tiles. [Through Rate]

[11.10.1]20 mm cement plaster of mix : 1. 1:4 (1 cement: 4 coarse sand) [Through Rate]

[11.17]Providing and fixing of chicken wire mesh for avoiding cracks in plaster with necessary nail/screws etc. complete in all respect to the entire satisfaction of engineer-in-charge [Through Rate]

[11.26.1]Pointing on tile brick work with cement mortar 1:3 (1 cement : 3 fine sand): 1. Flush/ Ruled/ Struck or weathered pointing [Through Rate]

[11.4.2]10 mm thick cement plaster 2. 1:3 (1 cement: 3 fine sand) [Through Rate]

[11.58]Providing and applying two coats white cement based putty of approved brand and manufacturer, over plastered surface and grinding the surface smooth with sand paper to get en even and smooth finish including cost and carriage of all material , labour charges, scaffolding, sundries etc. complete [Through Rate]

[11.6.1]15 mm cement plaster on the rough side of single or half brick wall of mix : 1. 1:4 (1 cement: 4 fine sand) [Through Rate]

[11.64.1]Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : 1. New work (two or more coats) over and including water thinnable priming coat with cement primer [Through Rate]

[11.8.2]12 mm cement plaster of mix : 2. 1:6 (1 cement: 6 coarse sand) [Through Rate]

[12.157.1.3]Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : 1.3. For fixed portion Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) [Through Rate]

[12.157.2.3]Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : 2.3. For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) [Through Rate]

[12.158.2]Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. 2. Pre-laminated particle board with decorative lamination on both sides [Through Rate]

[12.159.2]Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 2. With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) [Through Rate]

[12.160.1]Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight up to 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. 1. With stainless steel cover plate minimum 1.25 mm thickness [Through Rate]

[12.164]Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. [Through Rate]

[12.167.3]Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineer-in-charge 3. Polyester powder coated minimum thickness 50 micron aluminium [Through Rate]

[12.37.1]Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 1. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws [Through Rate]

[12.60.1]Providing and fixing bright finished brass hasp and staple (safety type) with necessary screws etc. complete : 1. 150 mm [Through Rate]

[13.29.2]Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 2. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works [Through Rate]

[13.3.2.2]Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 2.0 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 2.00 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: 2.2. Profile C Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately) [Through Rate]

[13.3.3.2]Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 2.0 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 2.00 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: 3.2. Profile E Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately) [Through Rate]

[13.5.3]Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge. 3. 10 x 120 mm [Through Rate]

[20.23.4]Extra for fixing and jointing union couplings in G.I. and W.I. pipelines. 4. 32 mm internal diameter [Through Rate]

[20.26.1]Cutting holes up to 23 cm through stone masonry or brick work in cement walls for pipes and making good including repointing, replastering and finishing according to existing finish where required. 1. 11.43 cm thick wall [Through Rate]

[20.26.2]Cutting holes up to 23 cm through stone masonry or brick work in cement walls for pipes and making good including repointing, replastering and finishing according to existing finish where required. 2. 22.86 cm thick wall [Through Rate]

[20.31.4]Fixing and jointing gun metal peet valves (heavy pattern) with hand wheels, on G.I. pipelines laid in the ground or inside buildings, including cartage from divisional stores or nearest railway station to site of works. 4. 32 mm internal diametre [Through Rate]

[20.31.6]Fixing and jointing gun metal peet valves (heavy pattern) with hand wheels, on G.I. pipelines laid in the ground or inside buildings, including cartage from divisional stores or nearest railway station to site of works. 6. 50 mm internal diametre [Through Rate]

[20.36]Making connection with the existing G.I. branch main up to 40 mm size including cutting and threading pipe etc., complete excluding cost of tee and long screw, but including cartage of material to site. [Through Rate]

[20.71.2]Supply, erection, testing of Ceiling fans IS marked (as per IS code 374) with suitable GI pipe complete in all respects complete as per directions of Engineer-in-charge 2. 56" (1400mm) [Through Rate]

[20.72]Supplying, errection, testing of Exhaust fan (as per IS code 374) having a capacity of 45 cubic metre per minute complete with suitable G.I sheet ducting in structure confirming to latest IS specifications complete in all respect to satisfaction of Engineer-in-charge. [Through Rate]

[21.100.4]Making holes for HCL soil / Waste pipe by core cutting up to 200 mm thick slabs and sealing with Drip seal sealant complete in all respect. 4. 150 mm dia pipe [Through Rate]

[22.103.3]Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 3. 25 mm nominal bore [Through Rate]

[22.104.1]Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 1. 15 mm nominal bore [Through Rate]

[22.107.1]Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 1. 15 mm nominal bore [Through Rate]

[22.108.1]Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 1. 15mm nominal bore [Through Rate]

[22.109]Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. [Through Rate]

[22.15]Providing and fixing CP Brass 32mm size Bottle Trap of approved quality and make and as per the direction of Engineer-in-charge. [Through Rate]

[22.16]Providing and fixing 40mm i/d G.I. waste pipe embedded in walls up to floor level including cost of union and plumber joint [Through Rate]

[22.181]Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. [Through Rate]

[22.212.1.2]Providing and fixing in position best Indian make coat and hat hooks fixed into wall with C.P. brass screws and rawl plugs etc. complete including cutting and making good the walls etc. 1.2. C.P Brass Two Way [Through Rate]

[22.22.1]Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 1. White vitreous chinaware Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests [Through Rate]

[22.221.11]Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) including Rack Bolt Screw Pair 115mm long without CP fittings complete in all respect. 11. Table Top (size 49 x 40 x 15 cm) [Through Rate]

[22.222.2.2]Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. 2.2. Single Socket Type B 110mm o/d SWR UPVC pipe lines laid complete [Through Rate]

[22.222.2.3]Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. 2.3. Single Socket Type B 90mm o/d SWR UPVC pipe lines laid complete [Through Rate]

[22.26.1]Providing and fixing white vitreous chinaware flat back half stall urinal of size 580x380x350 mm with white PVC flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : 1. Single half stall urinal with 5 litre P.V.C. automatic flushing cistern [Through Rate]

[22.26.4]Providing and fixing white vitreous chinaware flat back half stall urinal of size 580x380x350 mm with white PVC flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : 4. Range of three half stall urinals with 10 litre P.V.C. automatic flushing cistern [Through Rate]

[22.33]Providing and fixing white vitreous chinaware extended wall mounting water closet of size 780x370x690 mm of approved shape including providing and fixing white vitreous chinaware cistern / PVC cistern (with brass fitting) into the wall with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. [Through Rate]

[22.38]Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube up to 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge. [Through Rate]

[22.42.1]Providing and fixing toilet paper holder : 1. C.P. brass [Through Rate]

[22.50.1.2.1]Providing and fixing partitions for different type of urinals. 1.2.1. Vitreous Chinaware Partition plate. Large size 835mm x 355 mm White [Through Rate]

[22.85.4]Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 4. 32 mm nominal outer dia Pipes [Through Rate]

[22.85.6]Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 6. 50 mm nominal outer dia Pipes [Through Rate]

[22.86.2]Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 2. 20 mm nominal outer dia Pipes [Through Rate]

[22.86.3]Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 3. 25 mm nominal outer dia Pipes [Through Rate]

[23.1.6.1]COPPER WIRING IN MS CONDUIT (SURFACE/RECESS) 6.1. Wiring main ,sub mains and Circuit wiring in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in MS Conduit etc as required. 1 run of Size 1.50 Sqmm(1/1.40mm) [Through Rate]

[23.1.6.3]COPPER WIRING IN MS CONDUIT (SURFACE/RECESS) 6.3. Wiring main ,sub mains and Circuit wiring in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in MS Conduit etc as required. 1 run of Size 4 Sqmm(1/2.24mm) [Through Rate]

[23.1.6.6]COPPER WIRING IN MS CONDUIT (SURFACE/RECESS) 6.6. Wiring main ,sub mains and Circuit wiring in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in MS Conduit etc as required. 2 run of Size 1.50 Sqmm(1/1.40mm) [Through Rate]

[23.1.6.8]COPPER WIRING IN MS CONDUIT (SURFACE/RECESS) 6.8. Wiring main ,sub mains and Circuit wiring in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in MS Conduit etc as required. 2 run of Size 4 Sqmm(1/2.24mm) [Through Rate]

[23.1.6.9]COPPER WIRING IN MS CONDUIT (SURFACE/RECESS) 6.9. Wiring main ,sub mains and Circuit wiring in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in MS Conduit etc as required. 3 run of Size 1.50 Sqmm(1/1.40mm) [Through Rate]

[23.22.1.9]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 1.9. Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. 4 pole MCCB 6 amp to 100 amp , 25 KA [Through Rate]

[23.22.4.5]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 4.5. Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. TPN DB Horizontal type Double Door 4 way ( 8 incoming and 3phase*4 outgoing) [Through Rate]

[23.22.4.7]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 4.7. Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. TPN DB Horizontal type Double Door 8 way ( 8 incoming 3phase*8 outgoing) [Through Rate]

[23.22.5.1]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 5.1. Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- 6 amp. to 32 amp Single Pole [Through Rate]

[23.22.5.3]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 5.3. Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- 6 amp. to 32 amp Double POLE [Through Rate]

[23.23.10]MISCELLANEOUS 10. Supplying and drawing of 1 no UTP 4 pair CAT 6a LAN Cable in the existing surface/recess MS/PVC conduit as required [Through Rate]

[23.23.6..2]MISCELLANEOUS 6..2. Supply and erection of MS cable tray , duly pained as required including erection of the same on wall or ceiling with necessary fixture and other material required to complete the job in all respect up to the entire satisfaction of Engineer-in Charge of the work. MS perforated cable tray painted with powder coating 200 X 50 X 2 mm [Through Rate]

[23.23.6.3]MISCELLANEOUS 6.3. Supply and erection of MS cable tray , duly pained as required including erection of the same on wall or ceiling with necessary fixture and other material required to complete the job in all respect up to the entire satisfaction of Engineer-in Charge of the work. MS perforated cable tray painted with powder coating 375 X 50 X 2 mm [Through Rate]

[23.23.7.2]MISCELLANEOUS 7.2. Supply and erection of cable tray cover made of 1.25 mm thick GI sheet as required including erection of the same on existing cable tray with necessary fixture and other material required to complete the job in all respect up to the entire satisfaction of Engineer-in Charge of the work. GI cable tray Cover , suitable for cable tray of 200 X 50 X 2 mm [Through Rate]

[23.23.7.3]MISCELLANEOUS 7.3. Supply and erection of cable tray cover made of 1.25 mm thick GI sheet as required including erection of the same on existing cable tray with necessary fixture and other material required to complete the job in all respect up to the entire satisfaction of Engineer-in Charge of the work. GI cable tray Cover , suitable for cable tray of 375 X 50 X 2 mm metre [Through Rate]

[23.4.1.2]COPPER WIRING WITH MODULAR SWITCHES IN PVC CONDUIT (SURFACE/RECESS) 1.2. Wiring for Light/Fan/call bell point with modular type switch/socket and GI box, Modular type face plate etc in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe. Group B [Through Rate]

[23.4.4.2]COPPER WIRING WITH MODULAR SWITCHES IN PVC CONDUIT (SURFACE/RECESS) 4.2. Wiring in PVC conduit system for 3-pin 5amp. Plug point by using 2 no 1.5 sqmm FRLS copper wire and 1 no 1.5 Sqmm FRLS copper wire , including providing 1 no 5/6 Amp 3/5 pin Modular type socket and 1 no 5/6 Amp Modular type switch required GI Box ,modular face plate etc complete as required Group B [Through Rate]

[23.4.5.2]COPPER WIRING WITH MODULAR SWITCHES IN PVC CONDUIT (SURFACE/RECESS) 5.2. Wiring in PVC conduit system for 3-pin 15amp. Plug point by using 2 no 4 sqmm FRLS copper wire and 1 no 4 Sqmm FRLS copper wire for earthling , including providing 1 no 15/16 Amp 3/6 pin Modular socket and 1 no 15/16 Amp Modular switch required GI Box , modular face plate etc complete as required Group B [Through Rate]

[23.7.6.2]PVC CONDUIT PIPE ONLY (SURFACE OR RECESSED) FOR ELECTRICAL POINTS 6.2. Supply and erection of PVC CONDUIT ISI marked (Medium) recessed in wall/ceiling etc. including the cost of PVC bends, inspection boxes, iron hooks and cement concrete etc. complete in all respect up to the entire satisfaction of Engineer-in-Charge of work. PVC pipe of 25 mm dia. [Through Rate]

[23.7.6.4]PVC CONDUIT PIPE ONLY (SURFACE OR RECESSED) FOR ELECTRICAL POINTS 6.4. Supply and erection of PVC CONDUIT ISI marked (Medium) recessed in wall/ceiling etc. including the cost of PVC bends, inspection boxes, iron hooks and cement concrete etc. complete in all respect up to the entire satisfaction of Engineer-in-Charge of work. PVC pipe of 40 mm dia. [Through Rate]

[23.8.1.6]FITTING AND ACCESSORIES 1.6. Providing and fixing Piano type accessories of approved make in existing box and Bakelite sheet including fixing and making necessary connections, complete in all respect. Call bell 220/230 volts musical type [Through Rate]

[23.8.10.1]FITTING AND ACCESSORIES 10.1. Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects. 1 & 2 Modules including combined plate for Telephone and data [Through Rate]

[23.8.10.2]FITTING AND ACCESSORIES 10.2. Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects. 3 Modules [Through Rate]

[23.8.10.4]FITTING AND ACCESSORIES 10.4. Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects. 6 Modules [Through Rate]

[23.8.10.6]FITTING AND ACCESSORIES 10.6. Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects. 12 Modules [Through Rate]

[23.8.11.10]FITTING AND ACCESSORIES 11.10. Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. Blanking plate [Through Rate]

[23.8.11.11]FITTING AND ACCESSORIES 11.11. Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. RJ 45 Computer DATA socket outlet for CAT 6 or CAT6e cable Modular type [Through Rate]

[23.8.11.3]FITTING AND ACCESSORIES 11.3. Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. 15 amp 1 way switch [Through Rate]

[23.8.11.5]FITTING AND ACCESSORIES 11.5. Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. 15 amp 6 pin Socket [Through Rate]

[23.8.11.7]FITTING AND ACCESSORIES 11.7. Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. step type Fan Regulator 2 modules 300 watt [Through Rate]

[24.1.10]EARTHING AND LIGHTENING ARRESTOR 10. Providing and fixing 25 mm x 5mm copper strip on surface or in recess for connections etc. as required with all labour and material. [Through Rate]

[24.1.4]EARTHING AND LIGHTENING ARRESTOR 4. Earthing with tinned copper earth plate 600mmx600mmx3mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) etc. complete as required. [Through Rate]

[24.1.5]EARTHING AND LIGHTENING ARRESTOR 5. Extra for charcoal or coke and salt for G.I. plate or copper plate earth electrode. [Through Rate]

[24.1.9]EARTHING AND LIGHTENING ARRESTOR 9. Providing and fixing 25 mm x5 mm copper strip in 40 mm dia G.I. pipe from earth electrode as required. [Through Rate]

[28.16]Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken up to 30 cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately). For the purpose of measurement the entire treated surface will be measured. [Through Rate]

[28.27]Providing and laying cinder concrete in cement 1:15 (1 cement and 15 cinder) on terraced roofs and (up to three Storeys), laid to slope, including consolidating the same. [Through Rate]

[30.17]Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge. [Through Rate]

[30.18]Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge. [Through Rate]

[30.20.1]Flush pointing with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement for prefixed flat tile bricks on top of mud phaska : 1. With F.P.S. brick tiles [Through Rate]

[30.21]Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete [Through Rate]

[30.28.1]Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 1. One or more coats on old work [Through Rate]

[30.51]Taking out existing wooden door/window shutter, repair by cutting, painting etc. and refixing of repaired door/window shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. [Through Rate]

[30.53.1.2]Replacing and fixing 25 mm thick shutters for cup board etc i/c disposal of dismantled shutters, if any: 1.2. Panelled or panelled & glazed shutters : Ist class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. [Through Rate]

[30.54.1]Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: 1. Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) [Through Rate]

[31.2.2]Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge 2. 50mm average thickness [Through Rate]

[31.3.1]Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge. 1. Bars up to 12 mm diameter [Through Rate]

[31.4.2]Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect. 2. Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make [Through Rate]

[31.7.3]Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. 3. 50 mm average thickness in 3 layers. [Through Rate]

[35.23]Applying pre-packed cement based polymer mortar of strength 45 Mpa at 28 days for replacement of spalled concrete [Through Rate]

[5.11]Demolishing mud phaska in terracing and disposal of material within 50 metres lead. [Through Rate]

[5.14]Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. [Through Rate]

[5.23.2]Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 2. Nominal concrete 1:2:4 or leaner mix (i/c equivalent design mix) [Through Rate]

[5.42]Dismantling cement conglomerate / terrazzo floors 25 mm to 50 mm manually/ by mechanical means and disposal of material within standard lead as per direction of Engineer- in-charge. [Through Rate]

[5.43.1]Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. 1. For thickness of tiles 10 mm to 25 mm [Through Rate]

[5.45]Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. [Through Rate]

[5.70]Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. [Through Rate]

[6.1.2]Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 2. 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) [Through Rate]

[6.12.1]20 mm thick cement plaster damp-proof course 1:3 with 2 coats of bitumen at 1.65 kg. per sqm, laid hot and sanded: 1. Vertical [Through Rate]

[6.12.2]20 mm thick cement plaster damp-proof course 1:3 with 2 coats of bitumen at 1.65 kg. per sqm, laid hot and sanded: 2. Horizontal [Through Rate]

[6.14.1]Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) [Through Rate]

[6.30.3]Centering and shuttering including strutting, propping etc. and removal of form for 3. Suspended floors, roofs, landings, balconies and access platform [Through Rate]

[6.34.6]Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect above plinth level Note:- Reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work , excluding overlaps. Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods of binding & placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement. 6. Thermo-Mechanically Treated bars of grade Fe-500D or more. [Through Rate]

[6.59.2.1]Providing and fixing sheet covering over expansion joints with iron screws as per design. 2.1. Aluminium fluted strips 3.15 mm thick. 150 mm wide [Through Rate]

[7.22.2]Brick work with common burnt clay non-modular bricks of class designation 10.5 in superstructure above plinth level up to floor IV level in all shapes and sizes in : 2. Cement mortar 1:6 (1 cement : 6 coarse sand) [Through Rate]

[8.26.2.2]Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. 2.2. Granite of any colour and shade Area of slab over 0.50 sqm [Through Rate]

[9.11.1]10 cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa @ 35 kg per cum of earth and gobri leaping with mix 1:1 (1 clay : 1 cow dung) and covered with flat tile bricks, grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finished neat: 1. With common burnt clay non-modular brick tile of class designation 10 [Through Rate]

[9.17.1]Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : 1. In 75x75 mm deep chase [Through Rate]

[9.18]Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. [Through Rate]

[9.32.1]Providing and fixing UV stabilised fibreglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated `J` or `L` hooks, bolts and nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 1. 2 mm thick corrugated (2.5" or 4.2" or 6") or step-down (2" or 3" or 6" ) as specified [Through Rate]

[9.46.3]Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts and bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering up to 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer`s specification and also including the cost of making openings for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 3. 12.5 mm thick tapered edge gypsum moisture resistant board [Through Rate]

[9.48]Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calcium silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of all Tsections shall be pre-painted with polyester baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge. [Through Rate]

[9.57.3]Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 3. 150 mm diameter [Through Rate]

[9.58.1.3]Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 1.3. Coupler 150 mm [Through Rate]

[9.58.5.3]Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 5.3. Bend 87.5° 150 mm bend [Through Rate]

[9.59.3]Providing and fixing Unplasticised -PVC pipe clips of approved design to Unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 3. 150 mm [Through Rate]

NS items 138 to 333:- Supply installation testing and commissioning of wall free mounting dust and vermin proof compartmentalized cubical panel made out of 2 mm thick CRCA sheet, required hardware 3 mm thick backlite sheet provided all along the bus bar and cable alley separating switches compartment and supporting suitable channel duly painted by 2 caot of zine/Red oxide primer followed by 2 coats of powder coating in grey or required shade after rising, the panel having PU/Neoprene rubber gasket of not less than 3 mm thickness separate dectachable gland plate MS base channel hinged door with inter locking arrangement fo equipment/switch wear as per details.

Scraping of brick tiles of size 22.86cm x 11.43cm x 3.81cm in cement mortar, complete in all respect as directed by Engineer-In-charge

Providing and fixing PVC wall paneling consisting of 7mm thick cactus make hollow , PVC U-section beading of size 25mmx8mmx12mm and PVC angle nosing of size 25mm x 25mm x 1.5mm including cost of PVC gutties, screws, jointed with polyfix (instant glue), complete in all respect as per drawing or as directed by Engineer-in-Charge

Providing and fixing PVC elbow 3’’ i/dia (90 mm o/dia) of Prince/Supreme/Skipper make

Providing and fixing cowl of size 90 mm o/dia (3`` i/dia) of PRINCE/SUPREME/SKIPPER make.

Supply of PVC specials of PRINCE/ SUPREME/ SKIPPER make Door junction 3`` x 3`` x3``

Supplying, installation, testing and Commissioning of recessed type = 42 watt Full window glare free opal Diffuse LED Panel of size 595 X 595 mm suitable for Armstrong/POP/GB ceiling with M.S. Powder coated White Housing. Total system Lumen of 42 watt LED should be 5100 or above in cool dry light (5700 K), Power factor = 0.95, CRI (Ra) = 80, LED lamp efficiency = 140 lm/w, Average life ) 50000 hours. Complete with all accessories as required with connections. Make:-Philips, Bajaj (industrial), Havells

Collection of Ist class flat brick tiles at the site of work including carriage, loading, unloading and stacking etc., confirming to Haryana PWD Specification No. 3.6 (c), complete in all respect.

Supply of CPVC Control valves/ ball valve with brass internals of PRINCE/ SUPREME/ SKIPPER make 50 mm o/dia

Supply of CPVC Control valves/ ball valve with brass internals of PRINCE/ SUPREME/ SKIPPER make 32 mm o/dia

Supply of CPVC union coupling with brass internals of Prince/ Supreme/ Skipper make 50 mm dia

Supply of CPVC union coupling with brass internals of PRINCE/ SUPREME/ SKIPPER make 32 mm nominal outer dia

Providing and fixing of PVC Floor Trap 3’’ i/dia (90 mm o/dia) outlet of PRINCE/ SUPREME/ SKIPPER make

Supply of PVC Gully Trap (Heavy duty) of 100 mm dia size 4’’ i/dia with cover and frame of PRINCE/ SUPREME/ SKIPPER make

Providing and fixing PVC elbow 4’’ i/dia size of Prince/Supreme/Skipper make

Providing and fixing wall panneling (on wall) consisting of following:- Frame work:- Consisiting of factory manufactured G.I Channel of size 43 mm x 15 CM x 0.8mm fixed horizontally @ 2`-00` C/C with rawl plugs/screws on wall. (a) 12mm thick WPC Board (ISI Mark) of approved make fixed on G.I channel frame. (b) Top portion:- Consisting of 0`-6` wide strips of 1mm thick plastic laminated sheet (ISI mark) of approved make, shade and colour with 1/8` groove fixed on WPC board. Beading:- Beading of Size 0`-21/4 x 0`-13/4 of commerical hard wood such as champs, chikrasy, and chaplash at top. Including the cost of sprit polishing, rawl plugs, nails, screws etc., complete in all respect as per architectural drawing and design.

Providing and fixing PVC Door Junction/Tee specials of PRINCE/SKIPPER/SUPREME Make of Size 4` X 4` X 4` complete in all respect as directed and up to the satisfaction of Engineer-in-Charge.

Providing and fixing cowl of size 100 mm o/dia (4`` i/dia) of PRINCE/SUPREME/SKIPPER make.

Providing and fixing CP Brass Pillar Tap of JAGUAR make Model No. KUP-35021 PM with 110MM Extension Body complete in all respect as directed and up to the entire satisfaction of Engineer-in-Charge.

Providing and fixing mirror/ glass 5.5 mm thick mounted on asbestos sheet ground fixed in position by means of 4 Nos. CP brass screws and washers, rubber washer and rawl plugs embedded in wall or CP brass clamps with CP brass screws and wooden frame as required by the Engineer-in-charge, complete. Make:- SAINT GOBIAN/ ATUL/ MODI

Dismantling/removing of existing tarfelt from the roof and disposal of rubbish with a lead of 2 KM complete in all respect as directed by the Engineer-in-Charge.

Providing and fixing 15mm to 18mm thick granite stone (Polished) fixed on existing wooden worktop/surface with fevitite/areladite or any approved adhesive laid in any pattern as specified and jointed with white cement slurry mixed with pigment to match the shade including rubbing and polishing, compete as directed and up to the satisfaction of Engineer-in-Charge.

Providing and fixing Aluminium framework 600mm c/c both ways for wall panelling as per design drawing consisting of aluminium tubular sections of size 50x38mm having thickness not less than 2mm. The frame is to be fixed to the walls by means of angle holdfasts of suitable length out of 35x35x4mm MS/Aluminium angle duly given red-oxide and paint complete with expandable anchor fasteners of 65x10mm dia fixed o @1200mm C/C both ways. The framework shall be executed as per the drawings, specifications and instructions of the engineer in charge.

Providing and fixing of the sound acoustic baffle consisting of high density 1.8 mm thick layer of polymer-based visco elastic synthetic acoustic membrane asphalt free having a density of 2000 kg /cum infused in 20mm thick 450 kg /cum density wood wool board with cement platered surfaces. The joints are to be finally sealed with manufacturer-approved putty. Complete as per drawings and instructions of the engineer in charge.

Providing and fixing of stretch Fabric Acoustic Panelling with Inherently Fire retardant fabric The fabric is to be stretched using UPVC grippers provided @ 1200mmc/c or wherever required as per the design drawing complete with top, bottom and End. The Gripper is to be fixed over 12mm com ply. The Fabric to be gapped with Fire Retardant Melamine Foam ( Supreme). The foam is to be glued over the perforated 12mm BWR ply (IS303) fixed over the GI framework ( Ply and GI framework paid separately in items 6 and 8.) T Including finishing the edges as required. The work to be done complete as per the design and instructions of the engineer in charge including accessories as required.

Providing and laying of 50mm thick 1200GSM Non woven thermal bonded polyester wadding to be laid in the cavity behind wall paneling including fixing 24Guage chicken mesh jali complete in all respect and to the entire satisfaction of the Engineer-in-charge. ( Note: The Contractor to submit Manufacturing Test Certificate)

Providing and fixing frame work of galvanized iron for ceiling curved in plan / section / as well as plain ceiling for suspended false ceiling which includes galvanised iron perimeter chanels of size 27 mm and 0.5 mm thick having one flange of 20 mm and another of 30 mm along with perimeter of the ceiling, fixing in brick wall / R.C.C. / partition with the help of rawal plugs and screws, suspending galvanized iron intermediate chanels of size 45 mm and 0.9 mm thick with two flanges of 15 mm each from the soffit at 1200 mm centers with steel galvanized iron hanger of size 25 mm x 25mm with fasteners, ceiling section of 0.5 mm thickness having size of 80 x 25 x 51 mm and made from hot deep galvanized sheet fixed to the intermediate chanel with the help of connecting clips and direction perpendicular to the intermediate channels at 450 mm centers. 12.5 mm dry walls screws at 230 mm centers, fixing screws mechanically either with screw diver or drilling machine with suitable attachement including scaffolding at all heights etc. completed as per directions of Engineer-in-charge. Including MS Pipe Cup Scaffolding upto any height including material cost and cost of erection meant for false ceiling a as per the profile of the ceiling complete in all respect.(Make: India Gypsum, Saint Gobain, Boral)

Providing and fixing in position an Acoustic Ceiling made from seamless Rigitone 8/18 over an existing GI/AL frame, including the cost of required Cut-Outs, as per the Architectural and Acoustic Design and instructions, and Completing it in all aspects as directed by the engineer in charge.(Make: India Gypsum, Saint Gobain, Knauf.)

Providing and fixing of the sound acoustic baffle consisting of high density 1.8 mm thick layer of polymer-based visco elastic synthetic acoustic membrane asphalt free having a density of 2000 kg /cum infused in 20mm thick 450 kg /cum density wood wool board with cement plastered surfaces. The joints to be finally sealed with manufacturer-approved putty. Complete as per drawings and instructions of the engineer in charge. (For Ceiling)

Providing woodwork in frames made out of 50x 50mm Sal wood battens fixed at 600mm c/c as per drawing complete. The battens should be treated with anti-termite, as directed and up to the entire satisfaction of the Engineer-in-charge.

Providing and fixing of 2 No. staggered layers 12mm thick marine ply IS710 of approved make like century, Duro, Green Merino, fixed to Sal wood framework of size 600 mm c/c both ways ( Sal wood Framework to be Paid separately). The sal wood framework to be supported on 50x150x5mm neoprene pads and held in position by 35x35x5 mm angle cleats of 150mm length at 1200 mm centres. The wooden framework to be filled with 25mm thick thermal bonded polyester wadding mikron fiber of 800 gm/sqm (Make:Nowofill) held in position with 18mm 24 SWG chicken mesh fixed on the bottom of the wooden framework with necessary screws and washers. The cleats to be given two or more coats of zinc chromate primer. The work shall be executed as per the drawings, specifications and instructions of the engineer in charge.

Providing and fixing in Position Solid Hardwood flooring with plank thickness of not less than 22 mm, width not less than 120mm and length not less than 1830 mm(Except at wall end) from reputed manufacturer. The flooring shall be fixed with a tongue and groove interlocking system with clip method/(Synthetic adhesive).Two planks are joined with the help of a stainless steel clip/(Synthetic adhesive) to ensure control of expansion during climatic changes. Installation is done over 4 mm thick expanded polyethylene foam sheets to give cushioning effect, over the prepared surface with necessary skirting of the same material as of flooring. The Aluminum Anodised matching Color Transition profiles and Nosing`s to be fixed wherever required. The planks are factory-polished in lacquer. A uniform gap of 12 mm is to be maintained all around the wooden flooring to allow for expansion due to climatic change Flooring should have environmentally friendly certification of Forest Steward Council (FSC). The moisture content shall not exceed B 0,6 and Fire classification shall be Cfl-S1 Category (DIN EN 13501-1), all complete as per the direction of the Engineer in charge. (JUNKERS, DENMARK / BARBOSA PORTUGAL / CASTRO, EUROPE)

Providing and applying polyurethane polish over wooden floor including grinding of the floor complete as per manufacturer`s specifications. (NS)

Providing and fixing of acoustical channelled wood acoustical paneling with perforation as per detailed drawings including acoustical fleece at the back complete in all respects and to the entire satisfaction of Engineer-in- Charge

Providing and Fixing of Flocked floor covering rolls or equivalent having a density of 70 million fibers of nylon 6.6 per M2, Appearance Retention Hexapod ISO 140-8, Friction Slip Resistance Test EN 14041 Class DS, sanitized anti-microbial treatment with resilient waterproof backing, anti-allergic certified by British allergy foundation, anti-static, thickness 4.3 mm and approximate weight of 1.8 k.g./sqm of roll form. The reaction to fire should be as per EN 13501-1: Bfl-s1. shade as approved by the client and installed by the approved applicator of the manufacturer. Flocked flooring should be installed over cement-based compound available within India.

Providing and fixing in a position, 1000 x 50 x 25 mm L shape Auto-Glow Aluminum extruded strips on Auditorium steps as per detailed Architectural - Acoustical design and drawings etc. and as per direction of Engineer-in-charge/Architect. (Make: Prolite, Decon )

Supply Installation Testing and commissioning of 535 mmc/c Fire Retardant fabric upholstered chair conforming to BIFMA standards. The chair to have MS tubular framework welded together with continuous arc welding. The chair shall have powder coating of 65 microns on all of the MS tubular framework. The seat shall have Polyurethane foam of density 55 plus 3 KG/Cum and Back to have density of 50 plus 3 Kg/CuM. The height of the back to be 950-1000mm from the ground to top of back and for Seat to be 400-450mm from the ground. The rear of back shell and bottom of seat shell to be Polypropylene plastic in black colour Polypropylene plastic cover. The wooden armrest to be of 80mm and 400mm length with melamine polished in black colour. The armrest between two chairs in a row to be shared and at the both ends to be individual. Including cost of suitable chemical expansion fasteners as required of Hilti/Fischer make. Make Penworkers/ Featherlite /Godrej.

SITC of Fire retardant velvette fabric 500 GSM 200% gathering for Grand drape with approved colour duly stitched and with eyelets. Size: 13.5M X 4.5M Fabric Make : Reliance /Nexgen/Innovative/Raymonds

SITC of Fire retardant cotton fabric, 350 GSM100% gathering for Rear Curtain with approved colour duly stitched and with eyelets. Size: 8M X 4.5M Fabric Make : Reliance /Nexgen/Innovative/Raymonds

SITC of Fire retardant cotton fabric 350 GSM for wings duly stitched wrapped all around with 0% gathering. Size: 4M X 1.5M on both sides Fabric Make : Reliance /Nexgen/Innovative/Raymonds

SITC of Fire retardant cotton fabric 350 GSM100% gathering for frill with approved colour duly stitched and with eyelets. Size: 8.10M X 1.00M Fabric Make : Reliance /Nexgen/Innovative/Raymonds

SITC of Fire retardant velvette fabric 500 GSM 200% (2 times of the finished dimension) gathering for main valance with approved colour duly stitched of Size: 14M X 1.00M. Fabric Make : Reliance /Nexgen/Innovative/Raymonds

L type Wall Bench Size: L 6090 ±10 mm x W 750 ±10 mm x H 880 ±10 mm (WALL BENCH-1)-      Includes as following:  05 No`s C-Frame Structure in 60 ±3 x 30 ±2 x 2 ±0.2 mm thick hollow pipe construction-  01 No`s   850 ±10 mm wide corner unit assembly with front cover panel. The unit should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm)-  01 No`s   L -750 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including thearious size of connecting sets as per the approved design and description in the specifications.-   03 No`s     600 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including the various size of connecting sets as per the approved design and description in the specifications.- 02 No`s  750 ±10 mm Overhood wall cabinet dimensions 750mm (W) x 600mm (H) x 200mm (D) with two shutters, one adjustable shelf with 5mm glass view in shutter-      02 No`s  750 ±10 mm wide sink module with two shutters, SS304 Handles and SS Butt Hinges with roller catcher-     02 No`s   Single piece moulded 5mm PP sink (L 460 x W 450 x D 315) ±20 mm-        02 No`s Worktop mounted three way water tap with swan neck spout brass epoxy coated-        02 No`s Peg Board in Phenolic resin construction with 23±3 Nos. PP Pegs-       05 No`s Worktop mounted electrical raceway units for housing 6 Module electrical plate in GI powder coated 0.8mm GI Sheet metal with powder coating 60-70 microns.-        6 Module electrical plate complete including cost of copper wiring (appropirate Size) to be tapped from nearest electrical nitch as decided by Engineer in charge complete etc (One plate includes) ·          5 Amp electrical sockets – 1 nos.·         15 Amp electrical sockets -1 nos.·          5 Amp electrical switch – 1 nos.·          15 Amp electrical switch -1 nos. NOTE: Above nomenclature may be read in conjunction with the specification provided in the bid document.

1No.Wall Bench Size: L9000 ±10 mm x W 750 ±10 mm x H 880 ±10 mm (WALL BENCH-2) 7Nos.-       C-Frame Structure in 60 ±3 x 30 ±2 x 2 ±0.2 mm thick hollow pipe construction 3Nos.-       L -750 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including thearious size of connecting sets as per the approved design and description in the specifications. 7Nos.-       750 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 2Nos.-       750 ±10 mm wide sink module with two shutters, SS304 Handles and SS Butt Hinges with roller catcher 2Nos.-       Single piece moulded 5mm PP sink (L 460 x W 450 x D 315) ±20 mm 2Nos.-       Worktop mounted three way water tap with swan neck spout brass epoxy coated 2Nos.-       Peg Board in Phenolic resin construction with 23±3 Nos. PP Pegs 10Nos.-       Worktop mounted electrical raceway units for housing 6 Module electrical plate in GI powder coated 0.8mm GI Sheet metal with powder coating 60-70 microns. 10Nos.-       6 Module electrical plate complete including wiring (One plate includes) ·   5 Amp electrical sockets – 1 nos.· 15 Amp electrical sockets -1 nos.·   5 Amp electrical switch – 1 nos.·    15 Amp electrical switch -1 nos. NOTE: Above nomenclature may be read in conjunction with the specification provided in the bid document.

1No.Wall Bench Size: L1200 ±10 mm x W 750 ±10 mm x H 880 ±10 mm (WALL BENCH-3) 2Nos.-       C-Frame Structure in 60 ±3 x 30 ±2 x 2 ±0.2 mm thick hollow pipe construction 2Nos.-       600 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including the various size of connecting sets as per the approved design and description in the specifications. 2Nos.-       600 ±10 mm Overhood wall cabinet dimensions 750mm (W) x 600mm (H) x 200mm (D) with two shutters, one adjustable shelf with 5mm glass view in shutter 2Nos.-       Worktop mounted electrical raceway units for housing 6 Module electrical plate in GI powder coated 0.8mm GI Sheet metal with powder coating 60-70 microns. 2Nos.-       6 Module electrical plate complete including cost of copper wiring (appropirate Size) to be tapped from nearest electrical nitch as decided by Engineer in charge complete (One plate includes)· 5 Amp electrical sockets – 1 nos.· 15 Amp electrical sockets -1 nos.·   5 Amp electrical switch – 1 nos.· 15 Amp electrical switch -1 nos. NOTE: Above nomenclature may be read in conjunction with the specifications provided in the bid document.

1No.Wall Bench Size: L3845 ±10 mm x W 750 ±10 mm x H 880 ±10 mm (WALL BENCH-4) 4Nos.-       C-Frame Structure in 60 ±3 x 30 ±2 x 2 ±0.2 mm thick hollow pipe construction 3Nos.-       L -750 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including thearious size of connecting sets as per the approved design and description in the specifications. 2Nos.-       750 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 5Nos.-       Worktop mounted electrical raceway units for housing 6 Module electrical plate in GI powder coated 0.8mm GI Sheet metal with powder coating 60-70 microns. 5Nos.-       6 Module electrical plate complete including cost of copper wiring (appropirate Size) to be tapped from nearest electrical nitch as decided by Engineer in charge complete (One plate includes) · 5 Amp electrical sockets – 1 nos.· 15 Amp electrical sockets -1 nos.·   5 Amp electrical switch – 1 nos.· 15 Amp electrical switch -1 nos. NOTE: Above nomenclature may be read in conjunction with specifications provided in the bid document.

1Nos.ISLAND Bench Size: L 2350 ±10 mm x W 1500±10 mm x H 880±10 mm (ISLAND BENCH-1) 6Nos.-       C-Frame Structure in 60 ±3 x 30 ±2 x 2 ±0.2 mm thick hollow pipe construction 4Nos.-       L -750 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including thearious size of connecting sets as per the approved design and description in the specifications. 2Nos.-       750 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 1Nos.-       Two Tier Reagent Rack 300 width with reagent pillar height 600mm having slotting for adjustable shelves made from 12mm thick HPL acid resistant laminate/PP Sheet. Electrical trucking unit both side for housing 6 module plate with switch and sockets 4Nos.-       6 Module electrical plate complete including cost of copper wiring (appropirate Size) to be tapped from nearest electrical nitch as decided by Engineer in charge complete (One plate includes) · 5 Amp electrical sockets – 1 nos.· 15 Amp electrical sockets -1 nos.· 5 Amp electrical switch – 1 nos.· 15 Amp electrical switch -1 nos. NOTE: Above nomenclature may be read in conjunction with specifications provided in the bid document.

1Nos.ISLAND Bench Size: L 3850 ±10 mm x W 1500±10 mm x H 880±10 mm (ISLAND BENCH-2) 8Nos.-       C-Frame Structure in 60 ±3 x 30 ±2 x 2 ±0.2 mm thick hollow pipe construction 6Nos.-       L -750 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including thearious size of connecting sets as per the approved design and description in the specifications. 4Nos.-       750 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 2Nos.-       Two Tier Reagent Rack 300 width with reagent pillar height 600mm having slotting for adjustable shelves made from 12mm thick HPL acid resistant laminate/PP Sheet. Electrical trucking unit both side for housing 6 module plate with switch and sockets 8Nos.-       6 Module electrical plate complete including cost of copper wiring (appropirate Size) to be tapped from nearest electrical nitch as decided by Engineer in charge complete (One plate includes) · 5 Amp electrical sockets – 1 nos.·      15 Amp electrical sockets -1 nos.·   5 Amp electrical switch – 1 nos.· 15 Amp electrical switch -1 nos. NOTE: Above nomeclature may be read in conjunction with specification provided in the bid document.

1Nos.Chemical Storage Cabinet (CSC) Size: L 1000 ±50 x D 460±50 x H 1800±50mm 1Nos.-       304 ±10 mm Chemical Storage Cabinet with two shutters with 5mm glass view in shutter. Note: It is used for storages of corrosive chemicals. It must be provided with a proper ventilation system with 5mm 6inch PPFRP/PVC duct to enable exhaust of localized fumes from chemicals. The main frame should be made from 1.6mm sheet metal and body in 1.2 mm GI sheet with pure epoxy powder coating. Cabinets should have adjustable slotted profile in the back and front side for adjustable shelves. Cabinet should have three no. of 12mm thick phenolic resin high pressure laminate sheets/10mm PP sheet with pigeon hole perforations. It must be fitted with a float glass to enable visibility inside the cabinet. The overall dimensions are 1000 x 486 x 1800 mm (W x D x H) or equivalent as per the site requirements. Each shutter of cabinet should be fitted on 4 nos. of SS 304 1.6mm butt hinges. All the joints and crevices duly sealed with epoxy resin/silicon as per the approved design and layout applicable. NOTE: Above nomemclature may be read in conjunction with specifications provided in the bid document.

Agronomy Lab No.208 1Nos.ISLAND Bench Size: L 4450 ±10 mm x W 1500±10 mm x H 890±10 mm (ISLAND BENCH-1) 8Nos.-       C-Frame Structure in 60 ±3 x 30 ±2 x 2 ±0.2 mm thick hollow pipe construction 6Nos.-       L -750 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including thearious size of connecting sets as per the approved design and description in the specifications. 2Nos.-       600 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including the various size of connecting sets as per the approved design and description in the specifications. 4Nos.-       750 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 3Nos.-       Two Tier Reagent Rack 300 width with reagent pillar height 600mm having slotting for adjustable shelves made from 12mm thick HPL acid resistant laminate/PP Sheet. Electrical trucking unit both side for housing 6 module plate with switch and sockets-       ( Reagent Rack is 1500mm. 2 Nos. and Reagent Rack is 1350mm. 1 Nos.) 12Nos.-       6 Module electrical plate complete including cost of copper wiring (appropirate Size) to be tapped from nearest electrical nitch as decided by Engineer in charge complete (One plate includes) · 5 Amp electrical sockets – 1 nos.· 15 Amp electrical sockets -1 nos.· 5 Amp electrical switch – 1 nos.· 15 Amp electrical switch -1 nos. NOTE: Above nomenclature may be read in conjunction with the specifications provided in the bid document.

Agronomy Lab No.208 1Nos.U-Type Wall Bench Size: L 12780 ±10 mm x W 750 ±10 mm x H 890 ±10 mm (WALL BENCH-1) 11Nos.-       C-Frame Structure in 60 ±3 x 30 ±2 x 2 ±0.2 mm thick hollow pipe construction 2Nos.-       850 ±10 mm wide corner unit assembly with front cover panel. The unit should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) 3Nos.-       L -750 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including thearious size of connecting sets as per the approved design and description in the specifications. 5Nos.-       600 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including the various size of connecting sets as per the approved design and description in the specifications. 3Nos.-       750 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 2Nos.-       600 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 6Nos.-       600 ±10 mm Overhood wall cabinet dimensions 750mm (W) x 600mm (H) x 200mm (D) with two shutters, one adjustable shelf with 5mm glass view in shutter 15Nos.-       Worktop mounted electrical raceway units for housing 6 Module electrical plate in GI powder coated 0.8mm GI Sheet metal with powder coating 60-70 microns. 15Nos.-       6 Module electrical plate complete including cost of copper wiring (appropirate Size) to be tapped from nearest electrical nitch as decided by Engineer in charge complete (One plate includes) · 5 Amp electrical sockets – 1 nos.· 15 Amp electrical sockets -1 nos.· 5 Amp electrical switch – 1 nos.· 15 Amp electrical switch -1 nos. NOTE: Above nomenclature may be read in conjunction with specifications provided in the bid document.

Agronomy Lab No.208 1Nos.L- Type Wall Bench Size: L 8190 ±10 mm x W 750 ±10 mm x H 890 ±10 mm (WALL BENCH-2) 7Nos.-       C-Frame Structure in 60 ±3 x 30 ±2 x 2 ±0.2 mm thick hollow pipe construction 1Nos.-       850 ±10 mm wide corner unit assembly with front cover panel. The unit should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) 1Nos.-       L -750 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including thearious size of connecting sets as per the approved design and description in the specifications. 4Nos.-       600 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including the various size of connecting sets as per the approved design and description in the specifications. 3Nos.-       600 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 2Nos.-       600 ±10 mm wide sink module with two shutters, SS304 Handles and SS Butt Hinges with roller catcher. 2Nos.-       Single piece moulded 5mm PP sink (L 460 x W 450 x D 315) ±20 mm 2Nos.-       Worktop mounted three way water tap with swan neck spout brass epoxy coated 2Nos.-       Peg Board in Phenolic resin construction with 23±3 Nos. PP Pegs 9Nos.-       Worktop mounted electrical raceway units for housing 6 Module electrical plate in GI powder coated 0.8mm GI Sheet metal with powder coating 60-70 microns. 9Nos.-       6 Module electrical plate complete including cost of copper wiring (appropirate Size) to be tapped from nearest electrical nitch as decided by Engineer in charge complete(One plate includes) · 5 Amp electrical sockets – 1 nos.· 15 Amp electrical sockets -1 nos.· 5 Amp electrical switch – 1 nos.· 15 Amp electrical switch -1 nos. NOTE: Above nomenclature may be read in conjunction with specifications provided in the bid document.

Agronomy Lab No.208 1Nos.Wall Bench Size: L 3400 ±10 mm x W 750 ±10 mm x H 890 ±10 mm (WALL BENCH-4) 4Nos.-       C-Frame Structure in 60 ±3 x 30 ±2 x 2 ±0.2 mm thick hollow pipe construction 1Nos.-       L -750 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including thearious size of connecting sets as per the approved design and description in the specifications. 2Nos.-       600 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including the various size of connecting sets as per the approved design and description in the specifications. 1Nos.-       750 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 1Nos.-       600 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 2Nos.-       750 ±10 mm Overhood wall cabinet dimensions 750mm (W) x 600mm (H) x 200mm (D) with two shutters, one adjustable shelf with 5mm glass view in shutter 3Nos.-       600 ±10 mm Overhood wall cabinet dimensions 750mm (W) x 600mm (H) x 200mm (D) with two shutters, one adjustable shelf with 5mm glass view in shutter 5Nos.-       Worktop mounted electrical raceway units for housing 6 Module electrical plate in GI powder coated 0.8mm GI Sheet metal with powder coating 60-70 microns. 5Nos.-       6 Module electrical plate complete including cost of copper wiring (appropirate Size) to be tapped from nearest electrical nitch as decided by Engineer in charge complete(One plate includes) · 5 Amp electrical sockets – 1 nos.· 15 Amp electrical sockets -1 nos.·   5 Amp electrical switch – 1 nos.·   15 Amp electrical switch -1 nos. NOTE: Above nomenclature may be read in conjunction with the specifications provided in the bid document.

Agronomy Lab No.208 1Nos.Constant Bypass type Bench Fume Hood (Size: L1500±30 x D915±15 x H2300±40mm) Includes: 1Nos.-       Fumehood (Size: L1500±30 x D915±15 x H2300±40mm) 1Nos.-       Exhaust Blower for Fumehood Including the cost of Ducting for connecting Blower to Fumehood (Cost includes ducting from Lab to top of the building (from any floor to top of the building) complete) The fume hood system should complete in all aspects with modern and dynamic and ergonomic design including the polypropylene FRP ducting, PP Blower system, PP plus FRP chemical resistant wet scrubbing system for fume treatment before exhaust. The fume hood ducting should be strictly as per the approved drawing and layout by the committee. Vendor must submit the layout for approval before the start of the supply and commissioning. Fume hood should be a single body design for full height upto 2350mm constructed in heavy structure made of 1.2mm sheet GPSP sheet metal frame. The whole unit should be supported with internal frame structures in 1.6mm sheet metal supports. Overall dimensions of the fume hood system should be 1500mm (W) x 900mm (D) 2350mm (H). One anemometer must also be supplied with equipment. • Compliance: The fume hood system must be compliant to latest ASHRAE 110:2016 AM test procedure and protocols certifications. • Fume Hood Body: System should be single body type design. The main body of the system should not in two piece design i.e upper structure and lower structure. Both lateral sides of the system should have two open able panels for easy maintenance of gas and water utilities. The back panel should also be possible to remove and open. • Minimum Inside chamber dimension and design: free-standing rigid frame structure of steel (GPSP only) 1.2mm shall be provided to support exterior panels and interior liners and baffle panels. • Inner Liner: Interior liner panels shall be 4mm thick fiber glass reinforced polyester sheet or 4mm phenolic resin high pressure laminate fixed on GPSP 1.2mm sheet metal from outer side panels using stainless steel screws with plastic covered heads. • Front Utilities Pillars and Facia: Fume hood system should have continuous front facia pillars with 4 cut-out with removable cover on each side for hosing the gas, water and electrical and other utilities. • Sash System: Sash system should be vertically sliding on pulley system with belts/wire and counter weight balance. The counter weight must not be visible at the back side of the system. The back panel should be open able for maintenance. The frame of Sash should be 1mm GPSP sheet metal with 50mm wide frame rim size fitted with 5-6 mm thick toughened glass. Sash should not be visible on the top of the fume hood system. Sash moving mechanism should have provision to upgrade to automatic sensor based opening and closing at site by the manufacturer/supplier. Sash handles must be rust resistant. • Baffle: A stable, non-adjustable baffle shall be provided to aid in distributing the flow of air into and through the hood. The design of the baffle should be ergonomic. The baffle shall be spaced out 3-4 inches from the back wall of hood. The baffle shall be removable for cleaning. • Air foil: A streamlined airfoil shall be integral at the bottom of the hood opening on bench and distillation hoods. This foil shall provide a nominal 1” open space between the foil and the top front edge of the work surface to direct an air stream across the work surface to prevent back flow of air. The air foil mist have slotted cutouts for smooth flow of air when sash is closed. • Air Volume: System should be having Constant Air Volume at 100 fpm (feet per min.) is 630 cfm (cubic feet per minute) or better. • Air Velocity Monitoring System: System should be having TEL/Siemens or equivalent air flow monitoring system, make Tel/Siemens. • Utilities: System should have remotely controlled gas and water fittings and utility services includes Nitrogen, Vacuum, Water remote control valves controlled by extension rods projecting through the control panels of the hood, with colour coded plastic handles. Interior fitting for gases and water shall SS 304 grade seamless tubing. All utilities valves can be controlled independently and Gas fitting -7 bar and water fitting-10 bar Make: Water Saver/Broen/ToF Italy/KL Lab • Utilities Maintenance: For easy maintenance and replacements of gas and water utilities, the interior liner panels shall be removable without disassembly of the frame structure and outer steel panels. • Worktop: 18mm (±1mm) Z black granite. • Electrical Fittings: 5/15 amps single phase socket with 16 amps MCB, internal wiring, LED light, ON-OFF switch for Blower, tube light switch, ELCB for safety Purpose, emergency on-off switch, Top Panel light indicator if the system is on or off. • Apparatus Grid: Should have SS 316 grade solid 12mm thick powder coated grid in the fume hood system. • Drip Sink: System should be having a cup sink with panel mounted water tap and controller. • Base Cabinet: The base cabinets must be plinth design. The whole unit should be constructed from virgin GPSP sheet metal of 0.9mm thickness (thickness of sheet metal should be calculated without powder coating and powder coating must be 70-80 microns 100% pure epoxy powder coated meeting the SEFA 8M standards of test and procedures. The cabinets should be available in double shutter and single shutter configurations fitted with SS304 matt finish (stainless steel) 75 X 10, Stainless Steel L – Type butt hinges along with along with rolling catcher. Shutter should be able to withstand minimum 25kg load. It should be fitted with high quality hafele/Hettich or equivalent sliding channels with 40,000 life cycle test operation complying DIN EN 15706:2009-08 DIN EN 14749: 2005-11, DINEN 14074/DINEN 14071/2/3 supported with a test certificate. SEFA load bearing standards must be followed for cabinets. The shutter should have sandwiched construction with sound damper strips. • Damper: Fume Hood should have a damper for fume exhaust and connecting to the PP FRP ducting with provision to open and close as and when required. • The PP plus FRP ducting should be minimum 6mm thickness. The duct diameter should be 14” and 10 inches respectively. The ducting should be complete in all aspects including unions, long 90 deg. bends, bellows, sockets etc. The duct should be hanged on a firm metal support fixed with 6 inch fastners. • As the item is turnkey basis, any civil works required for drilling of brick wall, demolishing brick work for ducting etc shall be in the scope selected of bidder. NOTE: Above nomenclature may be read in conjunction with specification provided in the bid document.

Lab No.216 1No.L-Type Wall Bench Size: L 11040 ±10 mm x W 750 ±10 mm x H 890 ±10 mm (WALL BENCH-1) 9Nos.-       C-Frame Structure in 60 ±3 x 30 ±2 x 2 ±0.2 mm thick hollow pipe construction 1Nos.-       850 ±10 mm wide corner unit assembly with front cover panel. The unit should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) 2Nos.-       L -750 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including thearious size of connecting sets as per the approved design and description in the specifications. 3Nos.-       600 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including the various size of connecting sets as per the approved design and description in the specifications. 5Nos.-       750 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 1Nos.-       600 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 1Nos.-       750 ±10 mm wide sink module with two shutters, SS304 Handles and SS Butt Hinges with roller catcher. 1Nos.-       600 ±10 mm wide sink module with two shutters, SS304 Handles and SS Butt Hinges with roller catcher. 2Nos.-       Single piece moulded 5mm PP sink (L 460 x W 450 x D 315) ±20 mm 2Nos.-       Worktop mounted three way water tap with swan neck spout brass epoxy coated 2Nos.-       Peg Board in Phenolic resin construction with 23±3 Nos. PP Pegs 12Nos.-       Worktop mounted electrical raceway units for housing 6 Module electrical plate in GI powder coated 0.8mm GI Sheet metal with powder coating 60-70 microns. 12Nos.-       6 Module electrical plate complete including wiring (One plate includes) · 5 Amp electrical sockets – 1 nos.· 15 Amp electrical sockets -1 nos.·   5 Amp electrical switch – 1 nos.· 15 Amp electrical switch -1 nos. NOTE: Above nomenclature may be read in conjunction with specifications provided in the bid document.

Lab No.216 1Nos.Wall Bench Size: L 4750 ±10 mm x W 750 ±10 mm x H 890 ±10 mm (WALL BENCH-2) 5Nos.-       C-Frame Structure in 60 ±3 x 30 ±2 x 2 ±0.2 mm thick hollow pipe construction 2Nos.-       L -750 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including thearious size of connecting sets as per the approved design and description in the specifications. 2Nos.-       600 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including the various size of connecting sets as per the approved design and description in the specifications. 1Nos.-       750 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 2Nos.-       600 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 3Nos.-       600 ±10 mm Overhood wall cabinet dimensions 750mm (W) x 600mm (H) x 200mm (D) with two shutters, one adjustable shelf with 5mm glass view in shutter 5Nos.-       Worktop mounted electrical raceway units for housing 6 Module electrical plate in GI powder coated 0.8mm GI Sheet metal with powder coating 60-70 microns. 5Nos.-       Module electrical plate complete including cost of copper wiring (appropirate Size) to be tapped from nearest electrical nitch as decided by Engineer in charge complete(One plate includes) ) · 5 Amp electrical sockets – 1 nos.· 15 Amp electrical sockets -1 nos.·   5 Amp electrical switch – 1 nos.·  15 Amp electrical switch -1 nos. NOTE: Above nomenclature may be read in conjunction with specifications provided in the bid document.

Lab No.216 1No.Wall Bench Size: L 1500 ±10 mm x W 750 ±10 mm x H 890 ±10 mm (WALL BENCH-3) 2Nos.-       C-Frame Structure in 60 ±3 x 30 ±2 x 2 ±0.2 mm thick hollow pipe construction 2Nos.-       750 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 3Nos.-       600 ±10 mm Overhood wall cabinet dimensions 750mm (W) x 600mm (H) x 200mm (D) with two shutters, one adjustable shelf with 5mm glass view in shutter 2Nos.-       Worktop mounted electrical raceway units for housing 6 Module electrical plate in GI powder coated 0.8mm GI Sheet metal with powder coating 60-70 microns. 2Nos.-       Module electrical plate complete including cost of copper wiring (appropirate Size) to be tapped from nearest electrical nitch as decided by Engineer in charge complete(One plate includes) · 5 Amp electrical sockets – 1 nos.· 15 Amp electrical sockets -1 nos.·   5 Amp electrical switch – 1 nos.·   15 Amp electrical switch -1 nos. NOTE: Above nomenclature may be read in conjunction with the specifications provided in the bid document.

Lab No.216 1Nos.ISLAND Bench Size: L 4600±10 mm x W 1500±10 mm x H 890 ±10mm (ISLANDBench-1) 8Nos.-       C-Frame Structure in 60 ±3 x 30 ±2 x 2 ±0.2 mm thick hollow pipe construction 8Nos.-       L -750 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including thearious size of connecting sets as per the approved design and description in the specifications. 4Nos.-       750 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 3Nos.-       Two Tier Reagent Rack 300 width with reagent pillar height 600mm having slotting for adjustable shelves made from 12mm thick HPL acid resistant laminate/PP Sheet. Electrical trucking unit both side for housing 6 module plate with switch and sockets 12Nos.-       Module electrical plate complete including cost of copper wiring (appropirate Size) to be tapped from nearest electrical nitch as decided by Engineer in charge complete(One plate includes) · 5 Amp electrical sockets – 1 nos.·  15 Amp electrical sockets -1 nos.·   5 Amp electrical switch – 1 nos.·   15 Amp electrical switch -1 nos. NOTE: Above nomenclature may be read in conjunction with the specifications provided in the bid document.

Entomology PG Lab 1Nos.U- Type Wall Bench Size: L 19680 ± 10 mm x W 750 ±10 mm x H 890±10 mm (Wall Bench-1) 15Nos.-       C-Frame Structure in 60 ±3 x 30 ±2 x 2 ±0.2 mm thick hollow pipe construction 2Nos.-       850 ±10 mm wide corner unit assembly with front cover panel. The unit should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) 11Nos.-       L -750 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including thearious size of connecting sets as per the approved design and description in the specifications. 3Nos.-       600 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including the various size of connecting sets as per the approved design and description in the specifications. 5Nos.-       750 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 2Nos.-       600 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 7Nos.-       750 ±10 mm Overhood wall cabinet dimensions 750mm (W) x 600mm (H) x 200mm (D) with two shutters, one adjustable shelf with 5mm glass view in shutter 2Nos.-       600 ±10 mm Overhood wall cabinet dimensions 750mm (W) x 600mm (H) x 200mm (D) with two shutters, one adjustable shelf with 5mm glass view in shutter 1Nos.-       600 ±10 mm wide sink module with two shutters, SS304 Handles and SS Butt Hinges with roller catcher. 1Nos.-       Single piece moulded 5mm PP sink (L 460 x W 450 x D 315) ±20 mm 1Nos.-       Worktop mounted three way water tap with swan neck spout brass epoxy coated 1Nos.-       Peg Board in Phenolic resin construction with 23±3 Nos. PP Pegs 23Nos.-       Worktop mounted electrical raceway units for housing 6 Module electrical plate in GI powder coated 0.8mm GI Sheet metal with powder coating 60-70 microns. 23Nos.-       Module electrical plate complete including cost of copper wiring (appropirate Size) to be tapped from nearest electrical nitch as decided by Engineer in charge complete(One plate includes) · 5 Amp electrical sockets – 1 nos.· 15 Amp electrical sockets -1 nos.·   5 Amp electrical switch – 1 nos.· 15 Amp electrical switch -1 nos. NOTE: Above nomenclature may be read in conjunction with the specifications provided in the bid document.

Entomology PG Lab 2Nos.ISLAND Bench Size: L 3400±10 mm x W 1500±10 mm x H 900±10 mm (ISLANDBENCH-1) Includes following: 8Nos.-       C-Frame Structure in 60 ±3 x 30 ±2 x 2 ±0.2 mm thick hollow pipe construction 2Nos.-       L -750 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including thearious size of connecting sets as per the approved design and description in the specifications. 4Nos.-       600 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including the various size of connecting sets as per the approved design and description in the specifications. 2Nos.-       750 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 2Nos.-       600 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 2Nos.-       Two Tier Reagent Rack 300 width with reagent pillar height 600mm having slotting for adjustable shelves made from 12mm thick HPL acid resistant laminate/PP Sheet. Electrical trucking unit both side for housing 6 module plate with switch and sockets 8Nos.-      Module electrical plate complete including cost of copper wiring (appropirate Size) to be tapped from nearest electrical nitch as decided by Engineer in charge complete(One plate includes) ·          5 Amp electrical sockets – 1 nos.·         15 Amp electrical sockets -1 nos.·          5 Amp electrical switch – 1 nos.·          15 Amp electrical switch -1 nos. NOTE: Above nomenclature may be read in conjunction with specifications provided in the bid document.

Entomology UG Lab 1Nos.U- Type Wall Bench Size: L 21280 ± 10 mm x W 750 ±10 mm x H 890±10 mm (Wall Bench-1) 16Nos.-       C-Frame Structure in 60 ±3 x 30 ±2 x 2 ±0.2 mm thick hollow pipe construction 2Nos.-       850 ±10 mm wide corner unit assembly with front cover panel. The unit should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) 8Nos.-       L -750 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including thearious size of connecting sets as per the approved design and description in the specifications. 7Nos.-       600 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including the various size of connecting sets as per the approved design and description in the specifications. 4Nos.-       750 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 4Nos.-       600 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 5Nos.-       750 ±10 mm Overhood wall cabinet dimensions 750mm (W) x 600mm (H) x 200mm (D) with two shutters, one adjustable shelf with 5mm glass view in shutter 4Nos.-       600 ±10 mm Overhood wall cabinet dimensions 750mm (W) x 600mm (H) x 200mm (D) with two shutters, one adjustable shelf with 5mm glass view in shutter 2Nos.-       750 ±10 mm wide sink module with two shutters, SS304 Handles and SS Butt Hinges with roller catcher. 2Nos.-       Single piece moulded 5mm PP sink (L 460 x W 450 x D 315) ±20 mm 2Nos.-       Worktop mounted three way water tap with swan neck spout brass epoxy coated 2Nos.-       Peg Board in Phenolic resin construction with 23±3 Nos. PP Pegs 25Nos.-       Worktop mounted electrical raceway units for housing 6 Module electrical plate in GI powder coated 0.8mm GI Sheet metal with powder coating 60-70 microns. 25Nos.-       6 Module electrical plate complete including cost of copper wiring (appropirate Size) to be tapped from nearest electrical nitch as decided by Engineer in charge complete (One plate includes) ·          5 Amp electrical sockets – 1 nos.·          15 Amp electrical sockets -1 nos.·          5 Amp electrical switch – 1 nos.·          15 Amp electrical switch -1 nos. NOTE: Above nomenclature may be read in conjunction with specifications provided in the bid document.

Entomology UG Lab 2Nos.ISLAND Bench Size: L 4166±10 mm x W 1166±10 mm x H 890±10 mm (ISLAND BENCH-1) 4Nos.-       D-Frame Structure in 60 ±3 x 30 ±2 x 2 ±0.2 mm thick hollow pipe construction 8Nos.-       450 ±10 mm wide storage module with one drawer one shutters NOTE: Above nomenclature may be read in conjunction with the specifications provided in the bid document.

Plant Pathology Lab No. 177 1Nos.Wall Bench Size: L 9100 ± 10 mm x W 750 ±10 mm x H 890±10 mm (Wall Bench-1) Includes as follows: 8Nos.-       C-Frame Structure in 60 ±3 x 30 ±2 x 2 ±0.2 mm thick hollow pipe construction 3Nos.-       L -750 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including thearious size of connecting sets as per the approved design and description in the specifications. 2Nos.-       600 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including the various size of connecting sets as per the approved design and description in the specifications. 4Nos.-       750 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 2Nos.-       600 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 1Nos.-       750 ±10 mm wide sink module with two shutters, SS304 Handles and SS Butt Hinges with roller catcher. 1Nos.-       600 ±10 mm wide sink module with two shutters, SS304 Handles and SS Butt Hinges with roller catcher. 2Nos.-       Single piece moulded 5mm PP sink (L 460 x W 450 x D 315) ±20 mm 2Nos.-       Worktop mounted three way water tap with swan neck spout brass epoxy coated 2Nos.-       Peg Board in Phenolic resin construction with 23±3 Nos. PP Peg 11Nos.-       Worktop mounted electrical raceway units for housing 6 Module electrical plate in GI powder coated 0.8mm GI Sheet metal with powder coating 60-70 microns. 11Nos.-       6 Module electrical plate complete including cost of copper wiring (appropirate Size) to be tapped from nearest electrical nitch as decided by Engineer in charge complete (One plate includes) -        5 Amp electrical sockets – 1 nos.-        15 Amp electrical sockets -1 nos.-        5 Amp electrical switch – 1 nos.-        15 Amp electrical switch -1 nos. NOTE: Above nomenclature may be read in conjunction with the specifications provided in the bid document.

Plant Pathology Lab No. 177 2Nos.ISLAND Bench Size: L 5250±10 mm x W 1500±10 mm x H 900±10 mm (ISLANDBench-1) Includes as follows: 14Nos.-       C-Frame Structure in 60 ±3 x 30 ±2 x 2 ±0.2 mm thick hollow pipe construction 10Nos.-       L -750 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including thearious size of connecting sets as per the approved design and description in the specifications. 2Nos.-       600 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including the various size of connecting sets as per the approved design and description in the specifications. 8Nos.-       750 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 2Nos.-       600 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 5Nos.-       Two Tier Reagent Rack 300 width with reagent pillar height 600mm having slotting for adjustable shelves made from 12mm thick HPL acid resistant laminate/PP Sheet. Electrical trucking unit both side for housing 6 module plate with switch and sockets 20Nos.-       6 Module electrical plate complete including cost of copper wiring (appropirate Size) to be tapped from nearest electrical nitch as decided by Engineer in charge complete (One plate includes) ·          5 Amp electrical sockets – 1 nos.·          15 Amp electrical sockets -1 nos.·          5 Amp electrical switch – 1 nos.·          15 Amp electrical switch -1 nos. NOTE: Above nomenclature may be read in conjunction with the specification provided in the bid document.

Plant Pathology Lab No. 276 1Nos.L-TypeWall Bench Size: L 9690 ± 10 mm x W 750 ±10 mm x H 890±10 mm (Wall Bench-1) Includes as follows: 8Nos.-       C-Frame Structure in 60 ±3 x 30 ±2 x 2 ±0.2 mm thick hollow pipe construction 1Nos.-       850 ±10 mm wide corner unit assembly with front cover panel. The unit should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm)3Nos.-       L -750 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including the various size of connecting sets as per the approved design and description in the specifications .3Nos.-       600 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including the various size of connecting sets as per the approved design and description in the specifications .4Nos.-       750 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 1Nos.-       600 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 12Nos.-       Worktop mounted electrical raceway units for housing 6 Module electrical plate in GI powder coated 0.8mm GI Sheet metal with powder coating 60-70 microns. 12Nos.-       6 Module electrical plate complete including cost of copper wiring (appropirate Size) to be tapped from nearest electrical nitch as decided by Engineer in charge complete (One plate includes) ·          5 Amp electrical sockets – 1 nos.·          15 Amp electrical sockets -1 nos.·          5 Amp electrical switch – 1 nos.·          15 Amp electrical switch -1 nos. NOTE: Above nomenclature may read in conjunction with the specifications provided in the bid document.

Plant Pathology Lab No. 276 1Nos.L-Type Wall Bench Size: L 7590 ± 10 mm x W 750 ±10 mm x H 890±10 mm (Wall Bench-2) 6Nos.-       C-Frame Structure in 60 ±3 x 30 ±2 x 2 ±0.2 mm thick hollow pipe construction 1Nos.-       850 ±10 mm wide corner unit assembly with front cover panel. The unit should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) 3Nos.-       L -750 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including thearious size of connecting sets as per the approved design and description in the specifications .2Nos.-       600 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including the various size of connecting sets as per the approved design and description in the specifications. 2Nos.-       750 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 1Nos.-       600 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 9Nos.-       Worktop mounted electrical raceway units for housing 6 Module electrical plate in GI powder coated 0.8mm GI Sheet metal with powder coating 60-70 microns. 9Nos.-       6 Module electrical plate complete including cost of copper wiring (appropirate Size) to be tapped from nearest electrical nitch as decided by Engineer in charge complete (One plate includes) ·          5 Amp electrical sockets – 1 nos.·          15 Amp electrical sockets -1 nos.·          5 Amp electrical switch – 1 nos.·          15 Amp electrical switch -1 nos.NOTE: Above nomenclature may be read in conjunction with the specifications provided in the bid document.

Plant Pathology Lab No. 276 1Nos.Wall Bench Size: L 1950 ± 10 mm x W 750 ±10 mm x H 890±10 mm (Wall Bench-3) 3Nos.-       C-Frame Structure in 60 ±3 x 30 ±2 x 2 ±0.2 mm thick hollow pipe construction 1Nos.-       L -750 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including thearious size of connecting sets as per the approved design and description in the specifications. 1Nos.-       600 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including the various size of connecting sets as per the approved design and description in the specifications. 2Nos.-       600 ±10 mm wide sink module with two shutters, SS304 Handles and SS Butt Hinges with roller catcher.2Nos.-       Single piece moulded 5mm PP sink (L 460 x W 450 x D 315) ±20 mm 2Nos.-       Worktop mounted three way water tap with swan neck spout brass epoxy coated 2Nos.-       Peg Board in Phenolic resin construction with 23±3 Nos. PP Pegs 2Nos.-       Worktop mounted electrical raceway units for housing 6 Module electrical plate in GI powder coated 0.8mm GI Sheet metal with powder coating 60-70 microns. 2Nos.-       6 Module electrical plate complete including cost of copper wiring (appropirate Size) to be tapped from nearest electrical nitch as decided by Engineer in charge complete (One plate includes) ·          5 Amp electrical sockets – 1 nos.·          15 Amp electrical sockets -1 nos.·          5 Amp electrical switch – 1 nos.·          15 Amp electrical switch -1 nos. NOTE: Above nomenclature may be read in conjunction with the specifications provided in the bid documents.

Plant Pathology Lab No. 276 1Nos.ISLAND Bench Size: L 3850±10 mm x W 1500±10 mm x H 900±10 mm (ISLAND Bench-1) 8Nos.-       C-Frame Structure in 60 ±3 x 30 ±2 x 2 ±0.2 mm thick hollow pipe construction 6Nos.-       L -750 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including thearious size of connecting sets as per the approved design and description in the specifications. 4Nos.-       750 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 2Nos.-       Two Tier Reagent Rack 300 width with reagent pillar height 600mm having slotting for adjustable shelves made from 12mm thick HPL acid resistant laminate/PP Sheet. Electrical trucking unit both side for housing 6 module plate with switch and sockets 8Nos.-       6 Module electrical plate complete including cost of copper wiring (appropirate Size) to be tapped from nearest electrical nitch as decided by Engineer in charge complete (One plate includes) ·          5 Amp electrical sockets – 1 nos.·          15 Amp electrical sockets -1 nos.·          5 Amp electrical switch – 1 nos.·          15 Amp electrical switch -1 nos. NOTE: Above nomenclature may be read in conjunction with the specifications provided in the bid document.

Plant Pathology Lab No. 276 1Nos.Wall Bench Size: L 4500 ± 10 mm x W 750 ±10 mm x H 890±10 mm (Wall Bench-4) 4Nos.-       C-Frame Structure in 60 ±3 x 30 ±2 x 2 ±0.2 mm thick hollow pipe construction 4Nos.-       L -750 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including thearious size of connecting sets as per the approved design and description in the specifications. 2Nos.-       750 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 6Nos.-       Worktop mounted electrical raceway units for housing 6 Module electrical plate in GI powder coated 0.8mm GI Sheet metal with powder coating 60-70 microns. 6Nos.-       6 Module electrical plate complete including cost of copper wiring (appropirate Size) to be tapped from nearest electrical nitch as decided by Engineer in charge complete (One plate includes) ·          5 Amp electrical sockets – 1 nos.·          15 Amp electrical sockets -1 nos.·          5 Amp electrical switch – 1 nos.·          15 Amp electrical switch -1 nos. NOTE: Above nomenclature may be read in conjunction with the specifications provided in the bid document.

Forestory Lab 1Nos. Wall Bench Size: L 7800 ± 10 mm x W 750 ±10 mm x H 890±10 mm (Wall Bench-1) 7Nos.-       C-Frame Structure in 60 ±3 x 30 ±2 x 2 ±0.2 mm thick hollow pipe construction 2Nos.-       L -750 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including thearious size of connecting sets as per the approved design and description in the specifications. 2Nos.-       600 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including the various size of connecting sets as per the approved design and description in the specifications. 6Nos.-       750 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 1Nos.-       600 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 11Nos.-       Worktop mounted electrical raceway units for housing 6 Module electrical plate in GI powder coated 0.8mm GI Sheet metal with powder coating 60-70 microns. 11Nos.-       6 Module electrical plate complete including cost of copper wiring (appropirate Size) to be tapped from nearest electrical nitch as decided by Engineer in charge complete (One plate includes) ·          5 Amp electrical sockets – 1 nos.·          15 Amp electrical sockets -1 nos.·          5 Amp electrical switch – 1 nos.·          15 Amp electrical switch -1 nos. NOTE: Above nomenclature may be read in conjunction with the specifications provided in the bid document

Forestory Lab 2Nos.ISLAND Bench Size: L 2800±10 mm x W 1500±10 mm x H 900±10 mm (ISLAND Bench-1) Includes as follows: 6Nos.-       C-Frame Structure in 60 ±3 x 30 ±2 x 2 ±0.2 mm thick hollow pipe construction 2Nos.-       L -750 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including thearious size of connecting sets as per the approved design and description in the specifications. 1Nos.-       L -600 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including thearious size of connecting sets as per the approved design and description in the specifications. 2Nos.-       750 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 2Nos.-       600 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 1Nos.-       600 ±10 mm wide sink module with two shutters, SS304 Handles and SS Butt Hinges with roller catcher. 1Nos.-       Single piece moulded 5mm PP sink (L 460 x W 450 x D 315) ±20 mm 1Nos.-       Worktop mounted three way water tap with swan neck spout brass epoxy coated 1Nos.-       Peg Board in Phenolic resin construction with 23±3 Nos. PP Pegs 2Nos.-       Two Tier Reagent Rack 300 width with reagent pillar height 600mm having slotting for adjustable shelves made from 12mm thick HPL acid resistant laminate/PP Sheet. Electrical trucking unit both side for housing 6 module plate with switch and sockets-       (Reagent Rack 1500mm. 1 Nos. and Reagent Rack 1200mm. 1 Nos.) 8Nos.-       6 Module electrical plate complete including cost of copper wiring (appropirate Size) to be tapped from nearest electrical nitch as decided by Engineer in charge complete (One plate includes) ·          5 Amp electrical sockets – 1 nos.·          15 Amp electrical sockets -1 nos.·         5 Amp electrical switch – 1 nos.·         15 Amp electrical switch -1 nos. NOTE: Above nomenclature may be read in conjunction with the specifications provided in the bid document.

Forestory Lab 1Nos.Wall Bench Size: L 750 ± 10 mm x W 750 ±10 mm x H 890±10 mm (Wall Bench-4) 2Nos.-       C-Frame Structure in 60 ±3 x 30 ±2 x 2 ±0.2 mm thick hollow pipe construction 1Nos.-       L -750 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including thearious size of connecting sets as per the approved design and description in the specifications. 1Nos.-       Worktop mounted electrical raceway units for housing 6 Module electrical plate in GI powder coated 0.8mm GI Sheet metal with powder coating 60-70 microns. 1Nos.-       6 Module electrical plate complete including cost of copper wiring (appropirate Size) to be tapped from nearest electrical nitch as decided by Engineer in charge complete (One plate includes) ·          5 Amp electrical sockets – 1 nos.·          15 Amp electrical sockets -1 nos.·          5 Amp electrical switch – 1 nos.·         15 Amp electrical switch -1 nos. NOTE: Above nomenclature may be read in conjunction with the specifications provided in the bid document

AAS Lab No. 207 1Nos.Wall Bench Size: L 4800 ± 10 mm x W 750 ±10 mm x H 890±10 mm (Wall Bench-1) 5Nos.-       C-Frame Structure in 60 ±3 x 30 ±2 x 2 ±0.2 mm thick hollow pipe construction 2Nos.-       L -750 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including thearious size of connecting sets as per the approved design and description in the specifications. 2Nos.-       L -600 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including thearious size of connecting sets as per the approved design and description in the specifications. 2Nos.-       750 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 1Nos.-       600 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 7Nos.-       Worktop mounted electrical raceway units for housing 6 Module electrical plate in GI powder coated 0.8mm GI Sheet metal with powder coating 60-70 microns. 7Nos.-       6 Module electrical plate complete including cost of copper wiring (appropirate Size) to be tapped from nearest electrical nitch as decided by Engineer in charge complete (One plate includes) ·          5 Amp electrical sockets – 1 nos.·          15 Amp electrical sockets -1 nos.·          5 Amp electrical switch – 1 nos.·          15 Amp electrical switch -1 nos. NOTE: Above nomenclature may be read in conjunction with the specifications provided in the bid document

AAS Lab No. 207 1Nos.Wall Bench Size: L 1800 ± 10 mm x W 750 ±10 mm x H 890±10 mm (Wall Bench-1) 3Nos.-       C-Frame Structure in 60 ±3 x 30 ±2 x 2 ±0.2 mm thick hollow pipe construction 2Nos.-       L -600 ±10 mm wide storage module with one drawer (with Hettich/Hefele Sliding channel) two shutters, SS304 Handles and SS304 Butt Hinges with roller catcher. The modules should be complete in all aspects with Z Black 17mm granite ( plus /- 1mm) including thearious size of connecting sets as per the approved design and description in the specifications. 1Nos.-       600 ±10 mm Leg Space unit with openable cover panel with press lock made of PP/PVC 3Nos.-       750 ±10 mm Overhood wall cabinet with two shutters with 5mm glass view in shutter 3Nos.-       Worktop mounted electrical raceway units for housing 6 Module electrical plate in GI powder coated 0.8mm GI Sheet metal with powder coating 60-70 microns. 3Nos.-       6 Module electrical plate complete including cost of copper wiring (appropirate Size) to be tapped from nearest electrical nitch as decided by Engineer in charge complete (One plate includes) ·          5 Amp electrical sockets – 1 nos.·          15 Amp electrical sockets -1 nos.·          5 Amp electrical switch – 1 nos.·          15 Amp electrical switch -1 nos. NOTE: Above nomenclature may be read in conjunction with the specifications provided in the bid document

Supply Installation testing and commissioning of 48 Port POE Access Switch with the 3 years free comprehensive warranty period and 24x7 direct OEM TAC Support having following technical specifications: Switch architecture should be Fixed Form factor/ stackable based. Switch should have wire-speed, non-blocking and fanlessdesigne Architecture, Switch should have minimum of 48 x 10/100/1000 Mbps RJ45 ports and additional 4 SFP plus (1G/10G) fiber based ports, Minimum 2 port Populated with 10G MMF, Switch should have minimum of 136 Gbps or more data switching capacity and 95 Mpps or more forwarding throughput, Access Switch should have stacking capability with minimum stacking bandwidth of 40Gbps and should support a minimum of 8 units in a stack Minimum one meter Stacking cables should be included in supplied material, Switch should support min 16 K MAC addresses and min 4000 active VLANS, Switch should have full Layer 2 features like STP, RSTP, MSTP/PVST,LACP/IEEE802.3ad, ACL, QoS and IGMPv1/v2/v3, Switch should have Static Routing for IPv4 and IPv6, Access Switch should be upgradable to support advance Layer 3 features like, RIPv1/v2, OSPF v2, OSPFv3, and HSRP/VRRP in future with an additional software license upgrade, Should support 4K IGMP Groups, Should support 8 queues per port and security protocols like RADIUS, TACACS/TACACS plus , AAA and SSH, Switch should be quoted with 3 years direct OEM TAC support and Next Business day hardware shipment, Proposed switch should be IPv6 logo certified, including cost of petty material required to complete the work upto the entire satisfaction of Engineer In Charge. (NS) MAKE: BROCADE/CISCO/HP

S/E of Propeller type AC ventalating fans ( exhaust fan ) with necessary earthing of fan complete with louver shutter , 380mm sweep 900RPM ( Heavy Duty ) Make Orient , Usha , Khaitan , Crompton ( NS )

S/I/T/C of push ON/OFF type 25 A modular type motor starter switch (white colour) for AC’s including the cost of petty material required to complete the job upto entire satisfaction of Engineer-in-charge (NS)

Supplying and fixing of cooper bus bar duly tinned by means of SMC/DMC type insulator high tensile nuts and bolts spring washers fixing to same in existing panel including bending cutting in required shape and size and insulation with colour coding heat shrinkable PVC insulation complete in all respect . 31.64

Supply and erection of underground cable loose in existing pipe 4X25Sqmm (unarmoured)

Supply and erection of underground cable loose in existing pipe 4X16Sqmm (unarmoured)

supply Installation testing and commissioning of 24Port loaded Straight Jack pannel, including 3 years free comprehensive warranty period and cost of petty material required to complete the work upto the entire satisfaction of Engineer In Charge. MAKE: DLINK/AMP/RandM Engineer In Charge.MAKE: DLINK/AMP/RandM

Supply Installation testing and commissioning of Horizontal PVC Cable Manager - U, including 3 years free comprehensive warranty period and cost of petty material required to complete the work upto the entire satisfaction of Engineer In Charge. MAKE: DLINK/AMP/RandM

Supply Installation testing and commissioning of 12U Wall Mount rack with front glass door lockable, Fans 90 Cfm 230 Vac, PDU Horizontal 5Amp with 6 Schokets, Cantilever Tray-IU, Horizontal PVC Cable Manager and Hardware front panel Mtg. including 3 years free comprehensive warranty period and cost of petty material required to complete the work upto the entire satisfaction of Engineer In Charge.

S/E of 20 watt 2 feet LED fitting with 100 Lumens per watt power factor more than 0.95 ,average life 50000 hrs, with connections and entire satisfaction of engineer in charge of the work. (bajaj, havells, crompton)

Supply Installation testing and commissioning of Category 6 Patch Cord 7feet, including 3 years free comprehensive warranty period and cost of petty material required to complete the work upto the entire satisfaction of Engineer In Charge. MAKE : DLINK/AMP/Molex/belden

Supply Installation testing and commissioning of 24 Port POE Access Switch with the 3 years free comprehensive warranty period and 24x7 direct OEM TAC Support including cost of petty material required to complete the work upto the entire satisfaction of Engineer In Charge having following technical specifications : Switch should offer Wire-Speed and Non-Blocking Switching with 24 10/100/1000 RJ45 PoE/PoE plus Ethernet ports and additional 4 SFP plus (1G/10G ) fiber based ports, Minimum 2 port .Access Switches should support non-blocking switching fabric capacity of minimum 88 Gbps  and minimum line-rate forwarding capacity of 57 Mpps. Access switch should support minimum 16K MAC addresses and minimum 4K active VLANs.Access Switch should have stacking capability with minimum stacking bandwidth of 40Gbps and should support a minimum of 8 units in a stack from day one. Access switch should support up to 8 hardware queues per portAccess Switch should support full Layer 2 features like STP, RSTP,  LACP, ACL, QoS, IGMP v1/v2 from day 1. Access Switch should support basic L3 features like IPv4 and IPv6 static routing, Layer 3/4 ACLs, ECMP, virtual interfaces and routed interfaces from day 1. Access Switch should be upgradable to support advance Layer 3 features like, RIPv1/v2, OSPF v2, OSPFv3, and HSRP/VRRP in future with an additional software license upgrade.Access Switch should support minimum 1K IPv4 routes. The Access Switch should support IPv6 management features like IPv6 ping, IPv6 trace route, IPv6 Telnet, IPv6 TACACS, IPv6  and IPv6 RADIUS.All Switches and Transceivers should be of same OEM make.Access switch should support minimum 4K ACL rules ACL per Switch. Access switch should support SNMP v1/v2/v3, SSH, NTP and web management Access switch should have 1G of RAM and 2G of Flash Memory. MAKE : RUCKUS/CISCO/HP

`LASER DLP PROJECTOR :- Supply, Installation, Testing and Commissioning of DLP Laser Phosphor techEachlogy projector with suitable lens, 20600 ISO Lumens Brightness, Color wheel : 4 Segment (RGBY) - 2X or 3X speed, Contrast ratio: Full On/Off (Christie Real Black enabled): 2,000,000:1 , Full On/Off (Christie Real Black disabled): 1,200:1, Dynamic contrast -6000:1, Display type: 1 x 0.96`` DMD, Scan rates - Horizontal: 15-91kHz Vertical: 24-85Hz, Pixel clock rate - 162MHz, Illumination performance (hrs) -20,000 hours to 50%, Operating environment - Temp: 0 to 40° C (32 to 104° F) - Humidity: 10 - 85% Eachn-condensing, Signal inputs, Standard: - HDMI x 2 (one on rear panel, one on bottom of projector, independently selectable), 3GSDI (BNC), DVI-D (digital only), USB (type A) - image viewer or WiFi dongle (optional), HDBaseT (RJ45), Signals, HDTV formats VGA through to WUXGA (1920 x 1200) ctc complete with installation as per site requirement. including all petty material required to complete the job upto entire satisfaction of EIC. Make Christie/Barco/NEC`

Supply and Erection of underground cable 4 Core * 300sqmm Aluminium Armoured XLPE cable Laying loose in existing pipe / trenches etc. complete in all respect upto entire satis faction of EIC. Make Havells , Kei , LS Power , Finolex , CCI.

S/E of trenchless boring of road by HDD machine for laying required size of HDPE pipe 6` with socket reducer as per dia of cable at the end of pipe to closed the end of pipe to avoid entering of sand in pipe and all petty material required to complete the job as per entire satisfaction of the EIC.( Cost of 6` HDPE Pipe with socket and reducer including in the Cost )

`MOTORISED TAB TENSIONED SCREEN :- Supply,Installation, Testing and Commissioning of Motorized Tab- Tensioned Projection Screen, size 177`` H x 284`` W (335`` Diagonal , Matte White Fabric, Total Top Drop: 12`` Black, 16:10 Wide Format with remote control, voltage - 220volts etc. complete with installation as per the site requirement including all petty material required to complete the job upto entire satisfaction of EIC. . Make/Model: DRAPER(USA)/DALITE(USA)HARKNESS(UK)`

Supply, Installation, Testing and Commissioning meatl interactive podium with 21.5” or higher touch screen colour display (make - Wacom / Elo Touch ), Motorized panel angle position with up-down, Wooden/metal Top, sliding tray to protect, sliding shelf with electronic lock, Door lock and RFID Locks, provision for gooseneck microphone (Shure/ Sennheiser /Beyerdynamic) Ports- HDMI, VGA, audio, Network, USB, mic, front USB, 2X 5Amp power points, Internal rack space for PC etc complete with installation as per site requirement including all petty material required to complete the job upto entire satisfaction of EIC. . Make : AHA/ MTS/ MASS

Supplying, installation, testing and commissioning of IP 4K Pan-Tilt-Zoom PTZ Camera with NDI®|HX capability, PTZ Camera Capable of handling IP Video Resolution: 3840 x 2160 @30FPS or better, high quality CCD/CMOS sensor ,20 x or more Optical zoom, Pan range: ±160 degree, tilt range:(-) 20 deg to 90 deg, Auto focus, with HD-SDI, HDMI , 256 or more preset position Built-in complete as per specification as required. etc., complete with site requirement including all petty material required to complete the job upto entire satisfaction of EIC.. Make :- Panasonic/ Sony/ Canon

Supply, Installation, Testing and Commissioning of twisted pair HDMI transmitter and receiver set for camera signal extension having HDMI, power and control extension. Upto 4K resolution support, transmission distance supported upto 100m. Should be HDCP 2.3 Compliant. Shall meet regulatory compliance: CE, c-UL, UL, as per technical specifications. etc complete with installation as per site requirement including all petty material required to complete the job upto entire satisfaction of EIC.. Make : Extron/ Kramer/ AMX

Supply, Installation, Testing and Commissioning ofPicture in Picture (PIP) processor supporting minimum 01 VGA input, 03 HDMI inputs. one or more HDMI output. All inputs and outputs shall supoort 1080p resolution or higher. Shall provide two window picture-in-picture (PIP) with programable preset options. Shall feature built in high quality scaling with aspect Ratio Control. Should have EDID management feature and HDCP Compliant. Controls: Front button panel, RS232, Ethernet. Shall meet regulatory compliance: CE, c-UL, UL, as per technical specifications. etc complete with installation as per site requirement including all petty material required to complete the job upto entire satisfaction of EIC.. Make : Extron/ Kramer/ AMX

Supply, Installation, Testing and Commissioning of All in one Scaling Presentation Matrix Switcher with twisted pair Extension, 4K resolution, Scaling on twisted pair output or provided with Scaing receivers. , 2x STP input, 6x HDMI input, 2x STP output, 2x HDMI output, Built-in amplifier . Shall meet regulatory compliance: CE, c-UL, UL, as per technical specifications. complete with installation as per site requirement including all petty material required to complete the job upto entire satisfaction of EIC.. Make : Extron/ Kramer/ AMX

Supply, Installation, Testing and Commissioning of twisted pair transmitter having HDMI, Audio and Control. Inputs: 1xHDMI, 1xAnalog Audio, 1xControls (RS 232/IR), Outputs: 1 x Twisted pair/ HDbaseT on RJ 45, 4K resolution, transmission distance: Minimum 100m. Should be HDCP 2.3 Compliant. Shall meet regulatory compliance: CE, c-UL, UL, as per technical specifications. complete with installation as per site requirement including all petty material required to complete the job upto entire satisfaction of EIC.. Make : Extron/ Kramer/ AMX

Supply, Installation, Testing and Commissioning of twisted pair Receiver having HDMI, Audio and Control. Inputs: 1 x Twisted pair/ HDbaseT on RJ 45, Outputs: 1xHDMI, 1xanalog audio, 1x RS-232/IR, 4K resolution, transmission distance: minimum 100m. Should be HDCP 2.3 Compliant. Shall meet regulatory compliance: CE, c-UL, UL, as per technical specifications. complete with installation as per site requirement including all petty material required to complete the job upto entire satisfaction of EIC.. Make : Extron/ Kramer/ AMX

Supply, Installation, Testing and Commissioning of, high-performance control processor designed for centralized AV control in mid-sized applications. It is engineered to be faster and more secure in almost every way. It features advanced security standards and Gigabit Ethernet, which ensures compatibility with multiple TouchLink Pro touchpanels , Onboard 512MB RAM and 4.5GB Flash memory, One RS232/422/485 COM port with hardware and software handshaking, Six RS-232 COM ports(internal/external), Eight IR/serial, eight relay, and four or more Digital I/O ports, Programmable event scheduling etc. all complete. complete with installation as per site requirement including all petty material required to complete the job upto entire satisfaction of EIC.. Make : Extron/ Kramer/ AMX

Supply, Installation, Testing and Commissioning of HDMI to HDMI scaler with scaled resolution upto 4K/60 Hz, 4:4:4. HDCP 2.3 compliant, HDCP and EDID management, RS-232, USB control, as per technical specifications. complete with installation as per site requirement including all petty material required to complete the job upto entire satisfaction of EIC.. Make : Extron/ Kramer/ AMX

Supplying, installation, testing and commissioning of Fully Programmable IPAD 10` touchscreen interface for switching and control of AV equipment. TFT Active matrix Color LCD display, Resolution FULL HDr, Viewing angle: ±80° horizontal, ±80° vertical or more, Touch screen. Memory: 128 GB Flash, WIFI. Shall be supplied with Powere supply or POE Inejctor. Shall meet regulatory compliance, technical specifications. complete with control software and programming to control all th actice AV devices wirelessly, lauout as per EIC ,complete with case and installation as per site requirement including all petty material required to complete the job upto entire satisfaction of EIC.. Make : IPAD

Supply, Installation, Testing and Commissioning of 24 Port Full Duplex 10/100/1000Mbps Auto-Negotiation RJ45 network switch, Fanless architecture, Standards and Protocols IEEE 802.3 / 802.3u / 802.3ab/ 802.3x /802.1p to be supplied along with Built-in or external power supply, as per technical specifications. complete with installation as per site requirement including all petty material required to complete the job upto entire satisfaction of EIC.. Make : cisco/comscope(brocade)/HP

Supply, Installation, Testing and Commissioning of 6` (1.8 m) HDMI male(M) to HDMI Male (M) Cable with 28 AWG copper wire construction, resolution support of 4K/UHD @ 60 Hz, 4:4:4 or better, Gold plated connectors, as per technical specifications. complete with installation as per site requirement including all petty material required to complete the job upto entire satisfaction of EIC.. Make : Extron/ Kramer/ AMX

Supply, Installation, Testing and Commissioning of Flexible Male to Male 15-pin HD VGA cable with Audio (06 feet) for transmission of VGA video and analog audio signals, as per technical specifications. complete with installation as per site requirement including all petty material required to complete the job upto entire satisfaction of EIC.. Make : Extron/ Kramer/ AMX

Supply, Installation, Testing and Commissioning of 1000` (305 m) 24 AWG Shielded Twisted Pair Cable with SF/UTP construction and certified for minimum 450 MHz bandwidth at distance of 100 m, as per technical specifications. complete with installation as per site requirement including all petty material required to complete the job upto entire satisfaction of EIC.. Make : Extron/ Kramer/ AMX

Supply, Installation, Testing and Commissioning of Shielded RJ 45 connectors of same make. Shall Provide Conductor alignment guide for reduce crosstalk and signal interference. Shall support Shielding for EMI/RFI environments, metal strain relief. complete with installation as per site requirement including all petty material required to complete the job upto entire satisfaction of EIC.. Make : Extron/ Kramer/ AMX

Supply, Installation, Testing and Commissioning of 42 U Equipment Rack, Locakable front glass door, cooling facility, internal wiring, front glass door, heat dessipation fans, movement wheels, power distribution units and equipment shelves as required, fully welded construction for strength. Extra-wide rackrail for cable pass-throughs to facilitate front-to-rear cabling. complete with installation as per site requirement including all petty material required to complete the job upto entire satisfaction of EIC.. Make : MTS/ VALRACK

Supply, Installation, Testing and Commissioning of other cables, connectors, convertors etc as required for complete installation, programming and comissioning of the system etc.,. complete with installation as per site requirement including all petty material required to complete the job upto entire satisfaction of EIC.

Supply, installation, testing and Commissioning of stage left cluster having 14` or dual 10` or better LF driver and multiple MF/HF drivers (More than 4), Bi-amplified 2 or 3 Way array loudspeaker system, with Individual Module free field Frequency Range (-10dB) of 60Hz - 18kHz or better and Continuous Power Handling of )= 600W LF plus 150W MF/HF. The Loudspeaker module shall have a Max. SPL (Peak) of MF/HF)= 130 or better. It should have a Horizontal near dispersion pattern of 100º or better, vertical dispersion of the array shall be 60 degrees or better. The Modules shall be of Baltic birch plywood construction with internal metal bracing. All OEMs shall offer a suitable number of modules to achieve the required vertical angle (Minimum of 2 array modules) including all petty material required to complete the job upto entire satisfaction of EIC.. Make : Bose / L Acoustics / DandB Audiotechnik

Supply, installation, testing and Commissioning of OEM flying array frame and other necessary hardware for suspending main speaker arrays. All necessary hardware to be included to achieve a safety factor of 8:1 or better including all petty material required to complete the job upto entire satisfaction of EIC.. Make : Bose / L Acoustics / DandB Audiotechnik

Supply, installation, testing and Commissioning of a single 18` subwoofer. The louspeaker shall meet the following criteria: usable Frequency Range (-10 dB) of 28 Hz - 200Hz or better. It should have an axial Sensitivity of ) = 92dB (1W/1m) or more delivering a free field Max. Calculated SPL(peak) of )=127 db or better. The loudspeaker should have a nominal impedance: 4/8 ohm and continuous Power Handling of 750W or more: Complete with installation accessories as per the site requirement including all petty material required to complete the job upto entire satisfaction of EIC..Make : Bose / L Acoustics / DandB Audiotechnik

Supply, installation, testing and commissioning of two-way 5.25-inch or better high SPL IP55 rated surface mount loudspeaker. The louspeaker shall meet the following performance criteria: Frequency Range (-10 dB) of 90Hz - 18 kHz or better: Nominal Dispersion : 90°H x 80°V or better: Power handling of 400W peak or more: Sensitivity : 86 dB or better and the Max SPL : 116dB Peak or more with a Nominal impedence of 8 ohms and Integral multi-tap Transformer with selectable tap settings of 10/20/40/80W@70V and 100V: Standard wall mount brackets shall be included . including all petty material required to complete the job upto entire satisfaction of EIC. Make : Bose / L Acoustics / DandB Audiotechnik

Supply, installation, testing and commissioning of a two-way 8 to 10` LF, or better high SPL stage monitor loudspeaker. The louspeaker shall meet the following performance criteria: Frequency Range (-10 dB) of 80Hz - 18 kHz or better: Nominal Dispersion : 90°H x 60°V or better: Power handling of 800W peak or more: Sensitivity : 92 dB or better: Max SPL : 122dB Peak or more with a Nominal impedence of 8 ohms. Standard accessories shall be included including all petty material required to complete the job upto entire satisfaction of EIC.Make : Bose / L Acoustics / DandB Audiotechnik

Supply, installation, testing and commissioning of Full range 4.5-inch or better IP55 rated surface mounted music loudspeaker. The louspeaker shall meet the following performance criteria: Frequency range (-10dB) of 70Hz to 17kHz: Power handling of 160 Watt peak: Nominal dispersion of 90°(H) × 80°(V): Sensitivity of 87 dB SPL and Max SPL of 109 dB SPL peak or better: Nominal impedence of 8 ohms and Integral multi-tap Transformer with selectable tap settings of 5/10/20/40W@70V and 100V. The loudspeaker system shall be enclosed in engineered-plastics and a powder-coated steel grille. UL-1480 rated and EN54-24 compliant for Life safety/VA applicatons.Make : Bose / L Acoustics / DandB Audiotechnik

Supply , installation , testing and comissioning of Digital Sound Processor with 8 Mic/Line inputs and 8 analog outputs, 8 Additonal digital Outputs: 24 Bit A-D and D-A Convertors: Sampling Rate : 48 kHz: THD : ( 0.002 % : Channel Separation (Crosstalk) : ( 105 dB : Frequency Response 20 Hz - 20 kHz : Signal-to-Noise Ratio 80 dB :Dynamic Range : ) 115 dB: 5 Control Inputs and Outputs: RS-232 and Ethernet Port for third party Control and Monitoring: Expansion slots for optional Network Audio formats like Dante/Cobranet: inbuilt DSP features like Input Equalizers, Router, Band Pass filter, Output Equalizer, Delay, Limiters, gates , Source selectors etc. Shall Support at least 15 remote Zone controllers including all petty material required to complete the job upto entire satisfaction of EIC. . Make : Bose /Extron/Biamp

SITC of 8 channel class D Networkable Power amplifier with a Max Output Power of 8x500W@8 ohms, or bridged mode output power of 4x 1000W @ 8/4 ohms. 20Hz - 20 KHz, SNR of 102dB and THD plus N of (0.4% with built in protection such as Limiters, Temperature, DC, Short Circuit, Peak Current Limiters, Turn on delay etc. Built in DSP for Matrix routing, Speaker equalization, Delays, Array EQs etc complete with Ethernet Port for Network Control, programming and monitoring. Shall offer optional Network audio connectivity (Dante or CobraNet) through expansion slot including all petty material required to complete the job upto entire satisfaction of EIC.. Make : Bose / L Acoustics / DandB Audiotechnik

Supply, Installation, testing and commissioning of intregrated high impedence Class D zone amplifier with output power of upto 90W @ 70/100V. frequency response of 50Hz to 20kHz: THD (0.3%: Shall include priority override and Fire alarm interface, shall include necessary loudspeaker EQs including all petty material required to complete the job upto entire satisfaction of EIC..Make : Bose / Extron / Biamp

SITC of wireless handheld microphone with  (UHF) Diversity receiver  ,12 Channel Preset or better , Display on Transmitter and Receiver , RF Power  output 50mW or Better , Polar Pattern :- Cardioid , Carrier frequency range 500Mhz to 865Mhz , Frequency response 45–15kHz, Mute Button on Transmitter , Battery Operation time Minimum 8hr , Should have Charging Contact in Transmitter , Receiver dynamic range 106 dB (A-weighted) Or better, switching bandwidth Minimum 40 Mhz Or better including all petty material required to complete the job upto entire satisfaction of EIC.. Make : Beyerdynamic / Sennheiser / Shure

SITC of wireless Lapel microphone, with  (UHF) Diversity receiver ,12 Channel Preset or better , Display on Transmitter and Receiver , RF Power output 50mW or Better , Polar Pattern :- Omnidirectional, Carrier frequency range 500Mhz to 865Mhz, Frequency response 45–15kHz, Mute Button on Transmitter, Battery Operation time Minimum 8hr , Should have Charging Contact in Body pack Transmitter, Receiver dynamic range 106dB (A-weighted) switching bandwidth Minimum 40Mhz Or better including all petty material required to complete the job upto entire satisfaction of EIC.. Make : Beyerdynamic / Sennheiser / Shure

SITC of wireless Headword microphone with (UHF) Diversity receiver,12 Channel Present or better , Display on Transmitter and Receiver , RF Power output 50mW or Better , Polar Pattern :- Supercardioid, Carrier frequency range 500Mhz to 865Mhz , Frequency response 45–15kHz, Mute Button on Transmitter, Battery Operation time Minimum 8hr, Should have Charging Contact in Transmitter, Receiver dynamic range 106 dB (A-weighted) Or better, switching bandwidth Minimum 40mHz Mhz Or better including all petty material required to complete the job upto entire satisfaction of EIC.. Make : Beyerdynamic / Sennheiser / Shure

SITC of 6-way wideband antenna splitter for wireless systems with BNC-connector, 8V DC bias with range of 470 to 832 MHz. including all petty material required to complete the job upto entire satisfaction of EIC. Make : Beyerdynamic / Sennheiser / Shure

SITC of Passive omnidirectional wideband antenna, for wireless systems with BNC connector, incl. stand adaptor including all petty material required to complete the job upto entire satisfaction of EIC. . Make Beyerdynamic / Sennheiser / Shure

SITC of Wideband antenna amplifier for wireless systems with BNC connector, 5 dB/ 10 dB/ 15 dB switchable gain, feeding from antenna cable or external power supply . Make : Beyerdynamic / Sennheiser / Shure

SITC of Mounting kit for Antenna including all petty material required to complete the job upto entire satisfaction of EIC. . Make : Beyerdynamic / Sennheiser / Shure

SITC of Antenna Cable 25m. including all petty material required to complete the job upto entire satisfaction of EIC. Make : Beyerdynamic / Sennheiser / Shure

SITC of  cardioid electret condenser microphone with 500mm Length or better   A filter in the microphone grille shall suppress wind and pop noise. A programmable button shall operate in the operating modes ON/OFF, Push-To-Talk and Push-To-Mute. The microphone button shall be disabled when needed. The frequency response shall be selectable in two stages: linear or with low-cut filter to suppress low frequency noise. The LED ring to display the microphone status shall be deactivated when needed. The LED ring integrated in the microphone head shall  illuminate red to display the ready-to-speak status of the microphone. The microphone shall have an excellent RFI shielding and is immune to wireless communication devices.  The  microphone shall operate with phantom power P12, P24 or P48. A preamp with electronically balanced signal output shall be  integrated in the base. The gooseneck shall have two flexible 6 mm [0.24`] or better thin elements with a rigid tube in between. The housing shall be black, free from reflections and completely made of metal. The  frequency response shall be 50 to 19,000 Hz. The open circuit  voltage shall be 17 mV/Pa. The nominal impedance shall be 200 ohms. Shock-mounted holder for table installations, 3-pin female XLR connector including all petty material required to complete the job upto entire satisfaction of EIC.Make : Beyerdynamic / Sennheiser / Shure

SITC of Wired Vocal Microphone with On/Off switch, Transducer type: Dynamic, Polar pattern: Cardioid, Frequency response: 50 - 17,000 Hz, Open circuit voltage : 2.4 mV/Pa (-52.5 dBV) ±3 dB, Nominal impedance 600 O, Connection: XLR, 3-pin, male, etc. complete with installation as per the site requirement including all petty material required to complete the job upto entire satisfaction of EIC.. Make : Beyerdynamic / Sennheiser / Shure

SITC of Instrument Microphone with high-frequency reproduction Polar Pattern: Cardioid, Frequency response : 33-19,000 Hz, Open circuit voltage : 2.7 mV/Pa (-51.4 dBV), Nominal impedance : 600 O,  Load impedance : = 2 kO, Connection : XLR, 3-pin, male, etc. complete with installation as per the site requirement including all petty material required to complete the job upto entire satisfaction of EIC.. Make : Beyerdynamic / Sennheiser / Shure

SITC of drum microphone set consisting of 7 microphones, incl. microphone clamps and rugged softbag including all petty material required to complete the job upto entire satisfaction of EIC.. Make : Beyerdynamic / Sennheiser / Shure

SITC of headphone, closed systems, Transducer type: Dynamic, Nominal frequency response: .5-35,000Hz, Nominal impedance : 80O, straight single sided cable 3 m (9.8 ft.) with stereo mini-jack / 1/4` adapter including all petty material required to complete the job upto entire satisfaction of EIC. . Make : Beyerdynamic / Sennheiser / Shure