Chaudhary Charan Singh Haryana Agricultural University Tender
If you want to inquire about any e-tender the Haryana government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Haryana tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Haryana etender you're looking for. Read further to learn how to search and bid for etender Haryana.
Costs
EMD
₹ 9,980Document Cost
₹ 500Tender Fee
₹ 1,180
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_HRY_186414_1Bid Award Id
ViewTender No
Empanelment 2021-22Tender Authority
Chaudhary Charan Singh Haryana Agricultural University ViewPurchaser Address
-Website
http://https://www.hau.ac.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Pipes, cables etc. exceeding 80 mm metre (HSR 4.16.1.2)
1
-
-
Pipes, cables etc. exceeding 300 mm metre (HSR 4.16.1.3)
1
-
-
Removing mortar from and cleaning stones and concrete articles (net quantity of stacks of cleaned materials will be measured): In cement mortar (HSR 5.5.2)
1
-
-
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge In cement mortar (HSR 5.7.4)
1
-
-
Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m (stacks of cleaned bricks shall be measured): From brick work in cement mortar (HSR 5.8.3)
1
-
-
Demolishing cement concrete manually/ by mechanical means direction of Engineer - in - charge.
Nominal concrete 1 :2:4 or leaner mix (i/c equivalent cum design mix) (HSR 5.23.2)
1
-
-
Extra for scrapping, cleaning and straightening reinforcement kg from R.C.C. or R.B. work. (HSR 5.28)
1
-
-
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:
Of area 3 sq. metres and below each (HSR 5.29.1)
1
-
-
Of area beyond 3 sq. metres each (HSR 5.29.2)
1
-
-
Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead Of area 3 sq. metres and below (HSR 5.30.1)
1
-
-
Removing rolling shutters including top cover, brackets and side guides etc.complete (HSR 5.41)
1
-
-
Dismantling cement conglomerate / terrazzo floors 25 mm to 50 sqm 109 109
mm manually/ by mechanical means and disposal of material within standard lead as per direction of Engineer- in-charge. (HSR 5.42)
1
-
-
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.
For thickness of tiles 1 O mm to 25 mm (HSR 5.43.1)
1
-
-
For thickness of tiles above 25 mm and up to 40 mm (HSR 5.43.2)
1
-
-
Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 Meters lead as directed by Engineer-in-charge. (HSR 5.49)
1
-
-
Removal of old broken glass panes (any thickness or size, quality or description) from wooden frames, glazed with putty or fixed with beads. (HSR 5.50)
1
-
-
Removing old broken/serviceable glass of any thickness or size or description except polished plate glass from old wood or metal frames etc.(any thickness or size) hacking out old putty etc. including making good breakages in talking out and handling complete. (HSR 5.51)
1
-
-
Disposal of building rubbish / malba / similar unserviceable, cum 96 96
dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. (HSR 5.70)
1
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level:
1 : 1 ½: 3 ( 1 Cement: 1 ½ coarse sand (zone-Ill) : 3 graded stone aggregate 20 mm nominal size) (HSR 6.1.1)
1
-
-
1:2:4 (1 cement : 2 coarse sand (zone-Ill) : 4 graded cum stone aggregate 20 mm nominal size) (HSR 6.1.2)
1
-
-
1:3:6 (1 Cement : 3 coarse sand (zone-Ill) : 6 graded cum stone aggregate 20 mm nominal size (HSR 6.1.4)
1
-
-
1:3:6 (1 Cement : 3 coarse sand (zone-Ill): 6 graded cum stone aggregate 40 mm nominal size) (HSR 6.1.5)
1
-
-
1 :4: 8 ( 1 Cement : 4 coarse sand (zone-Ill) : 8 graded cum stone aggregate 40 mm nominal size) (HSR 6.1.6)
1
-
-
Providing and laying damp-proof course with cement concrete 1 :2:4 (1 cement : 2 coarse sand (zone-Ill): 4 graded stone aggregate 12.5mm nominal size) 40mm thick (HSR 6.8.2)
1
-
-
20 mm thick cement plaster damp-proof course 1 :3 with 2 coats of bitumen at 1.65 kg. per sqm, laid hot and sanded Vertical (HSR 6.12.1)
1
-
-
Horizontal (HSR 6.12.2)
1
-
-
Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect below plinth level
Note:- Reinforcement shall be measured in length including hooks, if any, separately for different diaMeters as actually used in work , excluding overlaps. Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods of binding & placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement. Thermo-Mechanically Treated bars of grade Fe-500D kg or more. (HSR 6.33.6)
1
-
-
Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement mortar 1 :3 (1 Cement : 3 coarse sand), including the cost of required centering, shutteringcomplete.
1:1½ :3 (1 Cement: 1½ coarse sand(zone-111) : 3 graded stone aggregate 20 mm nominal size). (HSR 6.39.1)
1
-
-
Brick work with common burnt clay non-modular bricks of class designation 7.5 in foundation and plinth in:
Cement mortar 1:4 (1 cement: 4 coarse sand) (HSR 7.21.1)
1
-
-
Cement mortar 1:6 (1 cement: 6 coarse sand) (HSR 7.21.2)
1
-
-
Brick work with common burnt clay non-modular bricks of class
designation 7 .5 in superstructure above plinth level up to floor IV
level in all shapes and sizes in :
Cement mortar 1:4 (1 cement: 4 coarse sand) (HSR 7.22.1)
1
-
-
Cement mortar 1:6 (1 cement: 6 coarse sand) (HSR 7.22.2)
1
-
-
Brick work with common burnt clay non-modular bricks of class designation 7 .5 in superstructure above plinth level up to floor IV level in all shapes and sizes in : Cement mortar 1:4 (1 cement: 4 coarse sand) if individuals quantity less hat 0.5 Cum for repair works (HSR 7.22.1)
1
-
-
Half brick masonry with common burnt clay non-modular bricks of class designation 7.5 in foundations and plinth in:
Cement mortar 1:3 (1 cement: 3 coarse sand) (HSR 7.27.1)
1
-
-
Cement mortar 1:4 (1 cement: 4 coarse sand) (HSR 7.27.2)
1
-
-
Half brick masonry with common burnt clay non-modular bricks of class designation 7 .5 in superstructure above plinth level up to floor IV level.
Cement mortar 1:3 (1 cement :3 coarse sand) (HSR 7.28.1)
1
-
-
Cement mortar 1 :4 ( 1 cement :4 coarse sand) (HSR 7 .28.2)
1
-
-
Extra for half brick masonry in superstructure, above floor IV level for every three floors or part thereof by mechanical means. (HSR 7.29)
1
-
-
Brick edging 7cm wide 11.4 cm deep to plinth protection with common burnt clay non-modular bricks of class designation 7.5 including grouting with cement mortar 1 :4 (1 cement : 4 fine sand). (HSR 7.55)
1
-
-
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded
and prepolished, machine cut for kitchen platfonns, vanity counters, window
sills, facias and similar locations of required size, approved shade, colour and
texture laid over 20 mm thick base cement mortar 1 :4 (1 cement : 4 coarse
sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black Area of slab up to 0.50 sqm (HSR 8.26.1.1)
1
-
-
Area of slab over 0.50 sqm (HSR 8.26.1.2)
1
-
-
Granite of any colour and shade
Area of slab up to 0.50 sqm (HSR 8.26.2.1)
1
-
-
Area of slab over 0.50 sqm (HSR 8.26.2.2)
1
-
-
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as
per design approved by Engineer-in-Charge. Marble work (HSR 8.27.1)
1
-
-
Granite work (HSR 8.27.2)
1
-
-
Extra for providing opening of required size & shape for wash basin/ kitchen
sink in kitchen platfonn, vanity counter and similar location in marble/ Granite/stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. (HSR 8.28)
1
-
-
Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete. (HSR 8.29)
1
-
-
Providing and fixing stone slab with table rubbed, edges rounded and
polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by
cutting a chase of appropriate width with chase cutter and embedding the
stone in the chase with epoxy grout or with cement concrete 1 :2:4 (1 cement:2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per
direction of Engineer-in-charge and finished smooth.
White Agaria Marble Stone (HSR 8.30.1)
1
-
-
Granite Stone of approved shade (HSR 8.30.2)
1
-
-
Providing and fixing flat pressed 3 layer medium density particle board or
graded particle board (Grade I) IS: 3087 marked, in ceiling with necessary nails etc. complete (frame work to be paid separately):
12 mm thick (HSR 9.42.1)
1
-
-
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS: 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x1 Ox0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing periMeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and30 mm long, the periMeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and periMeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering up to 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cut outs made with frame of periMeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charae but excludina the cost of oaintina with 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) (HSR 9.46.1)
1
-
-
12.5 mm thick tapered edge Glass Reinforced Gypsum (GRG) board conforming to IS: 2095- (Part 3): 1996 (Boards with BIS certification marks) (HSR 9.46.2)
1
-
-
12.5 mm thick tapered edge gypsum moisture resistant board (HSR 9.46.3)
1
-
-
Providing 1 O mm thick plaster of Paris (gypsum anhydrous) ceiling up to a
height of 5 m above floor level, over first class Kail wood strips 25x6 mm with
10 mm gap in between and reinforced with rabbit wire mesh fixed to wooden frame (frame work to be paid separately): Flat surfaces (HSR 9.52.1)
1
-
-
Curved surfaces (HSR9.52.2)
1
-
-
Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes
conforming to IS : 13592 Type A, including jointing with seal ring conforming
to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed
pipes.
75 mm diaMeter (HSR 9.57.1)
1
-
-
110 mm diaMeter (HSR 9.57.2)
1
-
-
150 mm diaMeter (HSR 9.57.3)
1
-
-
Providing and fixing Unplasticised -PVC pipe clips of approved design to
Unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood
plugs, screwed with M.S. screws of required length, including cutting brick
work and fixing in cement mortar 1 :4 (1 cement : 4 coarse sand) and making
good the wall etc. complete.
75 mm (HSR 9.59.1)
1
-
-
110 mm (HSR 9.59.2)
1
-
-
150 mm (HSR 9.59.3)
1
-
-
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diaMeter and weighing not less than 440 grams. (HSR 9.60)
1
-
-
Providing and laying of screed of 50 mm thick cement concrete 1 :8:16 to sqm
be laid below the topping. (HSR 10.4)
1
-
-
Providing and laying of conglomerate floor 50mm thick cement concrete
topping 1 :2:4 (HSR 10.7)
1
-
-
Providing and laying of conglomerate floor 40mm thick cement concrete
topping 1 :2:4 (HSR 10.8)
1
-
-
Providing a floating coat of 1.50 mm thick neat cement laid in one operation
to the topping. (HSR 10.14)
1
-
-
Providing and laying cement concrete pavement with 1: 2:4 (1 cement : 2
coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete. (HSR 10.16)
1
-
-
Providing and fixing glass strips in joints of terrazzo/ cement concrete floors. 40 mm wide and 4 mm thick. (HSR 10.22.1)
1
-
-
Providing and laying of chequered precast cement concrete tiles 22 mm thick
in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1 :4 (1 cement: 4 coarse sand). Dark shade pigment using ordinary cement (HSR 10.30.3)
1
-
-
Ordinary cement without any pigment (HSR 10.30.4)
1
-
-
Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved
make and colour using acid and/or alkali resisting mortar bedding, and joints
filled with acid and/or alkali resisting cement as per IS : 4457, complete as
per the direction of Engineer-in- Charge. In flooring on a bed of 1 O mm thick mortar 1 :4 ( 1 acid proof cement : 4 coarse sand)
Acid and alkali resistant tile (HSR 10.31.1.1)
1
-
-
In dado/skirting on 12 mm thick mortar 1 :4 (1 acid proof cement: 4 coarse sand)
Acid and alkali resistant tile (HSR 10.31.2.1)
1
-
-
Providing and laying of tile work in skirting, risers of steps and dado up to 2 m
height over 12 mm thick bed of cement mortar 1 :3 (1 cement :3 coarse sand)
and jointed with grey cement slurry @ 3.3 kg/sqm, including pointing in white cement mixed with pigment of matching shade complete.
Marble tiles (polished) Raj Nagar
8 mm thick (HSR 10.32.1.1)
1
-
-
Providing and laying of brick on edge flooring with bricks of class designation
7.5 on a bed of 12 mm cement mortar, including filling the joints with same
mortar, with common burnt clay non modular bricks: 1 :4 ( 1 cement : 4 coarse sand) (HSR 10.33.1)
1
-
-
Providing and laying of flat brick or tile flooring with bricks of class designation 7 .5 laid in cement sand mortar 1 :4 on 100 mm thick cement concrete 1:8:16 and 100 mm sand filling and cement pointing 1 :2 on top. (HSR 10.35.1)
1
-
-
Providing and fixing of Kota stone slab flooring over 20 mm (average) thick
base laid over and jointed with grey cement slurry mixed with pigment to
match the shade of the slab, including rubbing and polishing complete with
base of cement mortar 1 : 4 ( 1 cement : 4 coarse sand) :
25 mm thick (HSR10.37.1 )
1
-
-
Providing and fixing of Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1
cement: 3 coarse sand) and jointed with grey cement slurry mixed with
pigment to match the shade of the slabs, including rubbing and polishing
complete. (HSR 10.38)
1
-
-
Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab. (HSR 10.42)
1
-
-
Providing and laying Baroda Green marble stone 17mm and above thick in risers of step, skirting , dado, pillars and wall lining included matching the
grains of marble slab in any pattern as specified laid over 12mm thick cement
sand mortar 1 :3 and jointed with white cement slurry mixed with pigment to
match the shade of marble including rubbing and polishing. The rates are for
all heights / storey. The sample shall be got approved from Engineer In
Charge. (HSR 10.47)
1
-
-
Providing and laying Baroda Green marble stone 17mm and above thick flooring included matching the grains of marble slab in any pattern as specified laid over 12mm thick cement sand mortar 1 :3 and jointed with white slurry mixed with pigment to match the shade of marble including rubbing and polishing. The rates are for all heights / storey. The sample shall be got approved from Engineer In Charge. (HSR 10.48)
1
-
-
Providing and laying flamed finish Granite stone flooring in required design
and patterns, in linear as well as curvilinear portions of the building all
complete as per the architectural drawings with 18 mm thick stone slab over
20 mm (average) thick base of cement mortar 1 :4 (1 cement : 4 coarse sand)
laid and jointed with cement slurry and pointing with white cement slurry
admixed with pigment of matching shade including rubbing, curing and
polishing etc. all complete as specified and as directed by the Engineer-in-
Charge: Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. (HSR 10.49.1)
1
-
-
Providing and laying Polished Granite stone flooring in required design and
patterns, in linear as well as curvilinear portions of the building all complete
as per the architectural drawings with 18 mm thick stone slab over 20 mm
(average) thick base of cement mortar 1 :4 (1 cement : 4 coarse sand) laid
and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
Polished Granite stone slab jet Black, Cherry Red, Elite Brown, sqm Cat Eye or equivalent. (HSR 10.50.1 )
1
-
-
Providing and fixing granite stone in all shades 15mm to 18 mm thick in sqm
skirting /dado, risers of steps, pillars and wall facing, laid in any pattern as
specified over base of 12mm thick cement coarse sand mortar 1 :3 and
jointed with white cement slurry mixed with pigment to match the shade of
Granite including labour for fixing cramps pins and dowels etc. (HSR 10.51)
1
-
-
Providing and laying Ceramic glazed floor tiles of size 300x300 mm
(thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red
Brown, laid on 20 mm thick cement mortar 1 :4 (1 Cement : 4 Coarse sand),
Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints
with white cement and matching pigment etc., complete. (HSR 10.57)
1
-
-
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in
all colours, shades except burgundy, bottle green, black of any size as
approved by Engineer-in-Charge in skirting, risers of steps and dados over 12
mm thick bed of cement Mortar 1 :3 (1 cement: 3 coarse sand) and jointing
with grey cement slurry @ 3.3kg per sqm including pointing in white cement
mixed with pigment of matching shade complete. (HSR 10.58)
1
-
-
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to
IS : 15622, of approved make, in all colours, shades, except White, Ivory,
Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1 :4 (1
Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm
including pointing the joints with white cement and matching pigments etc.,
complete. (HSR 10.59)
1
-
-
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality
conforming to IS : 15622, of approved make, in colours White, Ivory, Grey,
Fume Red Brown, laid on 20 mm thick cement mortar 1 :4 (1 Cement: 4
Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including
grouting the joints with white cement and matching pigments etc., complete. (HSR 10.60)
1
-
-
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality
conforming to IS : 15622, of approved make, in all colours, shades, except
White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1 :4
(1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm
including pointing the joints with white cement and matching pigments etc.,
complete. (HSR 10.61)
1
-
-
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS:
15622 (thickness to be specified by the manufacturer), of approved make, in
all colours, shades except burgundy, bottle green, black of any size as
approved by Engineer-in-Charge, in skirting, risers of steps and dados, over
12 mm thick bed of cement mortar 1 :3 (1 cement : 3 coarse sand) and
jointing with grey cement slurry@ 3.3kg per sqm, including pointing in white
cement mixed with pigment of matching shade complete. (HSR 10.62)
1
-
-
Providing and laying vitrified floor tiles in different sizes (thickness to be
specified by the manufacturer) with water absorption less than 0.08% and
conforming to IS: 15622, of approved make, in all colours and shades, laid on
20mm thick cement mortar 1 :4 (1 cement : 4 coarse sand), jointing with grey
cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement
and matching pigments etc., complete. Size of Tile 600x600 mm (HSR 10.63.2)
1
-
-
Size of Tile 800x800 mm (HSR 10.63.3)
1
-
-
Size of Tile 1000x1000 mm (HSR 10.63.4)
1
-
-
Deduct for not using 20 mm thick cement mortar 1 :4 (1 cement : 4 coarse sand) bedding in laying of floor tiles and jointing with grey cement slurry @
3.3 kg/ sqm (HSR 10.64)
1
-
-
Providing and fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness (HSR 10.65)
1
-
-
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1 :3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm (HSR 10.67.2)
1
-
-
Size of Tile 800x800 mm (HSR 10.67.3)
1
-
-
Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick
Size of Tile 600x600 mm (HSR 10.69.2)
1
-
-
Size of Tile 600x600 mm (HSR 10.69.3)
1
-
-
Extra for grouting the joints of floor tiles having joints of 3 mm width, using
epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg
of hardener and 0.20 kg of resin per kg), including filling / grouting and
finishing complete as per direction of Engineer-in-charge. Size of Tile 600x600 mm (HSR 10.70.2)
1
-
-
Size of Tile BOOxBOO mm (HSR 10.70.3)
1
-
-
Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.06% and
conforming to IS:15622, of approved brand & manufacturer, in all colours and
shade, laid with cement based high polymer modified quick set tile adhesive
(water based) conforming to IS: 15477, in average 6 mm thickness, including
grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 600x600 mm (HSR 10.71.2)
1
-
-
Size of Tile 8OOx8OO mm (HSR 10.71.3)
1
-
-
Deduct for not grouting the joints with white cement and matching pigment in the items of fixing of vitrified tiles (HSR 10.72)
1
-
-
Providing and fixing ceramic & Glazed tiles/ vitrified tiles/ of any size of
approved make in floors / dados, laid in any pattern as specified over base of
3 mm thick adhesive of reputed brands as per IS specification 15477-2004
using 5 Kg. adhesive per sqm area of tiles and jointed with white cement
slurry mixed with pigment to match the shade of tiles excluding cost of tiles. (HSR 10.73)
1
-
-
Providing and fixing of P.V.C. sheet flexible type conforming to I.S.3462-1966
flooring plain coloured marble or mottled finish on a smooth damp proof base laid with adhesive recommended by manufacturer including pressing the sheet with a suitable tool to get a smooth surface all complete as directed by the Engineer-in-Charge. 2.00 mm thick (HSR 10.82.2)
1
-
-
3.00 mm thick (HSR 10.82.3)
1
-
-
Providing and fixing aluminium strips 2 mm thick complete with nails in floors
32mmWide (HSR 10.83.2)
1
-
-
Providing and fi xing glass strips,4 mm thick in terrazzo/ cement concrete
floors.
40 mmwide (HSR 10.85.1)
1
-
-
32mmwide (HSR 10.85.2)
1
-
-
Providing and fixing of gun metal cramps 15 mm x 6 mm, 16.5 cm long as per design including cost of mortar. (HSR 10.90)
1
-
-
Providing and fixing of copper pins 7.5 cm long of 6mm diaMeter including cost of mortar. (HSR 10.91)
1
-
-
Cement Concrete 1:8:16 with stone aggregate 40 mm size in cum
foundation and plinth. (HSR 10.100.2)
1
-
-
Mirror polishing on marble work/Granite work/stone work whereever reqired sqm 243 45 288 to give high gloss finish complete. (HSR 10.104)
1
-
-
Providing and laying matt finished vitrified tile of size 300x300x9.8mm having sqm 249 834 1082 with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of
cement mortar 1 :4 (1 cement : 4 coarse sand) in all shapes & patterns
including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. (HSR 10.106)
1
-
-
1O mm thick cement plaster 1 :2 (1 cement: 2 fine sand) (HSR 11.4.1)
1
-
-
1 :3 (1 cement: 3 fine sand) (HSR 11.4.2)
1
-
-
12 mm cement plaster of mix : 1 :2 (1 cement: 2 fine sand) (HSR 11.5.1)
1
-
-
1 :3 (1 cement: 3 fine sand) (HSR 11.5.2)
1
-
-
1 :4 (1 cement: 4 fine sand) (HSR 11.5.3)
1
-
-
1 :6 (1 cement: 6 fine sand) (HSR 11.5.4)
1
-
-
15 mm cement plaster on the rough side of single or half brick wall of mix : 1 :4 (1 cement: 4 fine sand) (HSR 11.6.1)
1
-
-
1 :6 (1 cement: 6 fine sand) (HSR 11.6.2)
1
-
-
20 mm cement plaster of mix
1 :4 ( 1 cement: 4 coarse sand) (HSR 11.10.1)
1
-
-
1 :6 (1 cement: 6 coarse sand) (HSR 11.10.2)
1
-
-
Providing and fixing of chicken wire mesh for avoiding cracks in plaster with
necessary nail/screws etc. complete in all respect to the entire satisfaction of
engineer-in-charge. (HSR 11.17)
1
-
-
18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1 :5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster 1 :3
(1 cement : 3 coarse sand) finished rough with sponge. (HSR 11.20)
1
-
-
Pointing on brick work or brick flooring with cement mortar 1 :3 (1 cement : 3
fine sand): Flush / Ruled/ Struck or weathered pointing (HSR 11.25.1)
1
-
-
Raised and cut pointing (HSR 11.25.2)
1
-
-
Pointing on tile brick work with cement mortar 1 :3 (1 cement : 3 fine sand):
Flush/ Ruled/ Struck or weathered pointing (HSR 11.26.1 )
1
-
-
Cement rendering on plaster 1 mm thick (HSR 11.52)
1
-
-
Providing & laying average 6mm thick POP Coating on walls, Ceiling, beams and lintels etc. complete in all respects as approved by the Engineer-In-
Charge. (HSR 11.57)
1
-
-
Providing and applying two coats white cement based putty of approved brand and manufacturer, over plastered surface and grinding the surface
smooth with sand paper to get en even and smooth finish including cost and
carriage of all material , labour charges, scaffolding, sundries etc. complete (HSR 11.58)
1
-
-
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. (HSR 11.59)
1
-
-
White washing with lime to give an even shade New work (three or more coats) (HSR 11.61.1)
1
-
-
Colour washing such as green, blue or buff to give an even shade : New work (two or more coats) with a base coat of white washing with lime (HSR 11.62.1)
1
-
-
New work (two or more coats) with a base coat of whiting (HSR 11.62.2)
1
-
-
Distempering with oil bound washable distemper of approved brand and
manufacture to give an even shade:
New work (two or more coats) over and including water thinnable
priming coat with cement primer (HSR 11.64.1)
1
-
-
Distempering with 1st quality acrylic distemper, having voe (Volatile Organic
Compound ) content less than 50 grams/ litre, of approved brand and
manufacture, including applying additional coats wherever required, to
achieve even shade and colour.
One coat (HSR 11.66.1)
1
-
-
Two coats (HSR 11.66.2)
1
-
-
Applying one coat of water thinnable cement primer of approved brand and
manufacture on wall surface:
Water thinnable cement primer (HSR 11.67.1)
1
-
-
Wall painting on a cement plaster surface with acrylic emulsion paint of
approved brand and manufacture to give an even shade : Two or more coats on new work (HSR 11. 71.1)
1
-
-
Preparation of ply wood surface for painting including sand papering
the surface and applying filling with approved quality filler consisting of white lead, linseed oil, varnish and chalk mitti including finishing the surface to required finish complete. (HSR 11.76)
1
-
-
Applying pink primer or aluminium priming coat on wood work including
preparation of surface, Knotting and stopping etc. (HSR 11.77)
1
-
-
Painting two coats excluding priming coat with synthetic enamel paint in all
shades on new wood work or metallic or plastered or concrete surfaces to
give an even shade. (HSR 11.78)
1
-
-
Painting the wooden I metal surface with synthetic enamel paint of approved
brand and manufacture to give an even shade
Two or more coats on new work (HSR 11.82.1)
1
-
-
Painting over the wooden/metal surface with aluminium paint of approved
brand and manufacture to give an even shade .
Two or more coats on new work (HSR 11.84.1 )
1
-
-
Melamine polishing on wood work (one or more coat). (HSR 11.91)
1
-
-
Finishing walls with textured exterior paint of required shade
New work (Two or more coats applied @ 3.28 litre/1 O sqm) over (HSR 11.94.1)
1
-
-
Finishing walls with Acrylic Smooth exterior paint of required shade :
New work (Two or more coat applied @ 1.67 litre/1 O sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) (HSR 11.95.1)
1
-
-
Providing and fixing panelled or panelled and glazed shutters for doors,
windows and clerestory windows, including ISi marked M.S. pressed butt
hinges bright finished of required size with necessary screws, excluding
panelling which will be paid for separately, all complete as per direction of
Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid
separately} 12.7.2 Kiln seasoned and chemically treated Hollock wood 30 mm thick shutters (HSR 12.7.2.2)
1
-
-
Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory window shutters.
(Area of opening for glass panes excluding portion inside rebate shall be
measured). (HSR 12.15)
1
-
-
Deduct for providing pin headed glass panes instead of ordinary float glass panes weighing 4 mm thick in doors, windows and clerestory windows
shutters (Area of opening for glass panes excluding portion inside rebate
shall be measured). (HSR 12.16)
1
-
-
Providing and fixing wire gauge laminated veneer lumber shutters conforming to IS : 14616, using galvanised wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm as per IS :1568, for doors, windows and clerestory windows, including ISi marked M.S. pressed butt hinges bright finished of required size with necessary screws, as per directions of Engineer-in-charge: (Note:- Butt hinges and necessary screws shall be paid separately) 30 mm thick shutters (HSR 12.20.2)
1
-
-
Providing and fixing plain lining with necessary screws/nuts & bolts/ nails,
including a coat of approved primer on one face, and fixed on wooden /steel
frame work, complete as per direction of Engineer-in- charge (Frame work
shall be paid separately).
12mm thick commercial ply conforming to IS: 1328 BWR type (HSR 12.22.1)
1
-
-
Planking of commercial hard wood, such as Hollock, champ, chikrassy and
chaplash etc., (Non-coniferous timber other than teak conforming to I.S.
specification no.1003 kiln-seasoned) planed on both sides, rebated and fixed
in position, including nails and screws, etc:-
30 mm thick (HSR 12.24.4)
1
-
-
Providing and fixing flat pressed 3 layer particle board medium density
exterior grade (Grade I) or graded wood particle board IS : 3087 marked, to
frame, backing or studding with screws etc. complete (Frames, backing or
studding to be paid separately):
12 mm thick (HSR 12.26.1)
1
-
-
18 mm thick (HSR 12.26.2)
1
-
-
Providing and fixing Pre-laminated flat pressed 3 layer (medium density)
particle board or graded wood particle board IS : 3087 marked, with one side
decorative and other side balancing lamination Grade I, Type II exterior grade
IS : 12823 marked, in shelves with screws and fittings wherever required,
edges to be painted with polyurethane primer (fittings to be paid separately) . 18 mm thick (HSR 12.27.1)
1
-
-
25 mm thick (HSR 12.27.2)
1
-
-
Providing and fixing cup board shutters 25 mm thick, with Pre-laminated flat
pressed three layer particle board or graded wood particle board IS: 12823
marked, exterior grade (Grade I Type II), having one side decorative
lamination and other side balancing lamination, including llnd class teak wood lipping of 25 mm wide x12 mm thick with necessary screws and bright
finished stainless steel piano hinges, complete as per direction of the
Engineer-in-Charge. (HSR 12.30)
1
-
-
Providing and fixing cup board shutters with 25 mm thick veneered particle
board IS : 3097 marked, exterior grade (Grade I), of approved make,
including llnd class teak wood lipping of 25 mm wide x 12 mm thick with
necessary screws and bright finished stainless steel piano hinges, complete
as per direction of Engineer-in-Charge.
With decorative veneering on one side and commercial veneering on other side (HSR 12.31.1)
1
-
-
With non decorative veneering on both sides (HSR 12.31.2)
1
-
-
Providing and fixing sliding arrangement in racks/ cupboards/cabinets shutter each by with stainless steel rollers to run inside C or E aluminium channel section (The payment of C or E channel shall be made separately). (HSR 12.35)
1
-
-
Providing and fixing ISi marked flush door shutters conforming to IS : 2202
(Part I) non-decorative type, core of block board construction with frame of
1st class hard wood and well matched commercial 3 ply veneering with
vertical grains or cross bands and face veneers on both faces of shutters:
35 mm thick including ISi marked Stainless Steel butt hinges with sqm
necessary screws (HSR 12.37.1)
1
-
-
30 mm thick including ISi marked Stainless Steel butt hinges with necessary screws (HSR 12.37.2)
1
-
-
25 mm thick (for cupboard) including ISi marked nickel plated bright finished M.S. piano hinges with necessary screws. (HSR 12.37.3)
1
-
-
Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated
brackets: 20 mm dia (heavy type) (HSR 12.49.1)
1
-
-
25 mm dia (heavy type) (HSR 12.49.2)
1
-
-
Providing and fixing ISi marked, IS: 1341, M.S. heavy weight bright finished
butt hinges with necessary screws etc. complete:
125x90x4.00 mm (HSR 12.56.1)
1
-
-
100x75x3.50 mm (HSR 12.56.2)
1
-
-
75x60x3. 10 mm (HSR 12.56.3)
1
-
-
50x40x2.50 mm (HSR 12.56.4)
1
-
-
Providing M.S. Piano hinges ISi marked IS: 3818 finished with nickel plating
and fixing with necessary screws etc., complete.
Overall width 35 mm (HSR 12.57.1)
1
-
-
Overall width 50 mm (HSR 12.57.2)
1
-
-
Overall width 65 mm (HSR 12.57.3)
1
-
-
Providing and fixing bright finished brass casement window fastener with necessary screws etc. complete. (HSR 12.58)
1
-
-
Providing and fixing bright finished brass casement stays (straight peg type)
with necessary screws etc. complete: 300 mm weighing not less than 330 gms (HSR 12.59.1)
1
-
-
250 mm weighing not less than 280 gms (HSR 12.59.2)
1
-
-
200 mm weighing not less than 240 gms (HSR 12.59.3)
1
-
-
Providing and fixing bright finished brass hasp and staple (safety type) with
necessary screws etc. complete
150 mm (HSR 12.60.1)
1
-
-
115 mm (HSR 12.60.2)
1
-
-
90 mm (HSR 12.60.3)
1
-
-
Providing and fixing ISi marked oxidised M.S. sliding door bolts with nuts and
screws etc. complete :
300x16 mm (HSR 12.65.1)
1
-
-
Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. 125 mm (HSR 12.75.1)
1
-
-
Providing and fi xing bright finished brass tower bolts (barrel type) with
necessary screws etc. complete : 250x10 mm (HSR 12.78.1)
1
-
-
200x10 mm (HSR 12.78.2)
1
-
-
150x10 mm (HSR 12.78.3)
1
-
-
100x10 mm (HSR 12.78.4)
1
-
-
Providing and fixing bright finished brass door latch with necessary screws
etc. complete 300x16 x5 mm (HSR 12.79.1)
1
-
-
250x16 x5 mm (HSR 12.79.2)
1
-
-
Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary
screws etc. complete. (HSR 12.80)
1
-
-
Providing and fi xing 50 mm bright finished brass cup board or wardrobe knob
of approved quality with necessary screws. (HSR 12.84)
1
-
-
Providing and fi xing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. (HSR 12.86)
1
-
-
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 356 4, embossed on the body,
door weight up to 35 kg and door width up to 7 00 mm), with necessary
accessories and screws etc. complete. (HSR 12.88)
1
-
-
Providing and fixing aluminium e xtruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS: 3564, embossed on the
body, door weight up to 3 6 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. (HSR 12.89)
1
-
-
Providing and fixing chromium plated brass 1 00 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary
screws etc. complete. (HSR 12.90)
1
-
-
Providing and fi xing chromium plated brass night latch of approved quality including necessary screws etc. complete (HSR 12.91)
1
-
-
Providing and fixing special quality chromium plated brass cupboard locks
with six levers of approved quality including necessary screws etc. complete. Size 40 mm (HSR 12.92.1)
1
-
-
Size 50 mm (HSR12.92.2)
1
-
-
Size 65 mm (HSR12.92.3)
1
-
-
Size 75 mm (HSR12.92.4)
1
-
-
Providing and fixing chromium plated brass 50 mm cupboard or wardrobe knobs with nuts complete (HSR 12.93)
1
-
-
Providing and fixing chromium plated brass casement window fastener with
necessary screws etc. complete. (HSR 12.95)
1
-
-
Providing and fixing chromium plated brass handles with necessary screws
etc. complete
125 mm (HSR 12.94.1)
1
-
-
100 mm (HSR 12.94.2)
1
-
-
75 mm (HSR 12.94.3)
1
-
-
Providing and fixing chromium plated brass casement stays (straight peg
type) with necessary screws etc. complete :
300 mm weighing not less than 330 gms (HSR 12.96.1 )
1
-
-
250 mm weighing not less than 280 gms (HSR 12.96.2)
1
-
-
200 mm weighing not less than 240 gms (HSR 12.96.3 )
1
-
-
Providing and fixing ISi marked aluminium butt hinges anodised (anodic
coating not less than grade AC 10 as per IS: 1868) transparent or dyed to
required colour or shade with necessary screws etc. complete:
125x75x4 mm (HSR 12.97.1)
1
-
-
125x63x4 mm (HSR 12.97 .2)
1
-
-
100x75x4 mm (HSR 12.97.3)
1
-
-
100x63x4 mm (HSR 12.97 .4)
1
-
-
100x63x3.2 mm (HSR 12.97.5)
1
-
-
75x63x4 mm (HSR 12.97.6)
1
-
-
75x63x3.2 mm (HSR 12.97.7)
1
-
-
75x45x3.2 mm (HSR 12.97.8)
1
-
-
Providing and fixing aluminium sliding door bolts, ISi marked anodised
(anodic coating not less than grade AC 10 as per IS : 1868), transparent or
dyed to required colour or shade, with nuts and screws etc. complete :
300x16 mm (HSR 12.98.1)
1
-
-
250x16 mm (HSR 12.98.2 )
1
-
-
Providing and fixing aluminium tower bolts, ISi marked, anodised (anodic
coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to
required colour or shade, with necessary screws etc. complete
300x10 mm (HSR 12.99.1)
1
-
-
250x10 mm (HSR 12.99.2)
1
-
-
200x10 mm (HSR 12.99.3)
1
-
-
Providing and fixing aluminium handles, ISi marked, anodised (anodic coating not less than grade AC 1 O as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete 125 mm (HSR 12.102.1)
1
-
-
100 mm (HSR 12.102.2)
1
-
-
Providing and fixing aluminium hanging floor door stopper, ISi marked,
anodised (anodic coating not less than grade AC 1 O as per IS : 1868)
transparent or dyed to required colour and shade, with necessary screws etc.
complete. Single rubber stopper (HSR 12.103.1)
1
-
-
Twin rubber stopper (HSR 12.103.2 )
1
-
-
Providing and fixing aluminium casement stays, ISi marked, anodised
transparent or dyed to required colour and shade or powder coated or
polyester powder coated, with necessary screws etc. complete Anodized (AC-15) Aluminium (HSR 12.104.2)
1
-
-
Powder coated minimum thickness 50 micron aluminium (HSR 12.104.3)
1
-
-
Providing and fixing bright finished brass 100 mm mortice latch and lock, ISi
marked, with six levers and a pair of anodised (anodic coating not less than
grade AC 10 as per IS : 1868) aluminium lever handles of approved quality
with necessary screws etc. complete. (HSR 12.105)
1
-
-
Providing and fixing aluminium tee channels (heavy duty) with rollers & stop
end in pelmets as curtain rod (HSR 12.106)
1
-
-
Providing Aluminium Jali of thickness 7mm thick with openings - 75mm X 75mm of including anodizing and fixing in frame with cost of screws etc. (HSR 12.107)
1
-
-
Providing fixing aluminium round shape handle of outer dia 100mm with
screws etc. complete.
Anodized (AC-15) Aluminium (HSR 12.108.1)
1
-
-
Powder coated minimum thickness 50 micron (HSR 12.108.2)
1
-
-
Providing and fixing aluminium work for doors, windows, ventilators and
partitions with extruded built up standard tubular sections/ appropriate Z
sections and other sections of approved make conforming to IS: 733 and IS:
1285, fixing with dash fasteners of required dia and size, including necessary
filling up the gaps at junctions, i.e. at top, bottom and sides with required
EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) (HSR 12.157.1.1)
1
-
-
Powder coated aluminium (minimum thickness of powder coating 50 micron)
(HSR 12.157.1.2)
1
-
-
Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) (HSR 12.157.1.3)
1
-
-
Powder coated aluminium (minimum thickness of powder coating 50 micron(HSR 12.157.2.2 )
1
-
-
Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) (HSR 12.157.2.3)
1
-
-
Providing and fixing 12 mm thick prelaminated particle board flat pressed
three layer or graded wood particle board conforming to IS: 12823 Grade I
Type II, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per
architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side (HSR 12.158.1)
1
-
-
Pre-laminated particle board with decorative lamination on both sides (HSR 12.158.2 )
1
-
-
Providing and fixing glazing in aluminium door, window, ventilator shutters
and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per
the architectural drawings and the directions of engineer-in-charge . (Cost of
aluminium snap beading shall be paid in basic item):
With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) (HSR 12.159.1 )
1
-
-
With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) (HSR 12.159.2 )
1
-
-
With float glass panes of 6 mm thickness (weight not less than 15 kg/sqm) (HSR 12.159.3)
1
-
-
With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm) (HSR 12.159.4)
1
-
-
Providing and fixing double action hydraulic floor spring of approved brand
and manufacture conforming to IS : 6315, having brand logo embossed on
the body / plate with double spring mechanism and door weight up to 125 kg,
for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover
plates with brass pivot and single piece M.S. sheet outer box with slide plate
etc. complete as per the direction of Engineer-in-charge. With stainless steel cover plate minimum 1.25 mm thickness (HSR 12.160.1)
1
-
-
With brass cover plate minimum 1.25 mm thickness (HSR 12.160.2)
1
-
-
Providing and fixing double glazed hermetically sealed glazing in aluminium
windows, ventilators and partition etc. with 6 mm thick clear float glass both
side, having 12 mm air gap, including providing EPDM gasket, perforated
aluminium spacers, desiccants, sealant (Both primary and secondary sealant)
etc. as per specifications, drawings and direction of Engineer-in-charge
complete. (HSR 12.161)
1
-
-
Providing and fixing 12 mm thick frameless toughened glass door shutter of
approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately). (HSR 12.171)
1
-
-
Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for aluminium door, with necessary screws etc complete as per direction of Engineer- in-charge. (HSR 12.173)
1
-
-
Providing and fixing T-iron frames for doors, windows and ventilators of mild
steel Tee-sections, joints mitred and welded, including fixing of necessary
butt hinges and screws and applying a priming coat of approved steel primer.
Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size). (HSR 13.1.1 )
1
-
-
Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately) (HSR 13.1.2)
1
-
-
Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by
angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or
to the wall with dash fastener, including fixing of necessary butt hinges and
screws and applying a priming coat of approved steel primer, all complete as
per the direction of Engineer-In-charge. (HSR 13.2)
1
-
-
Providing and fixing pressed steel door frames conforming to IS: 4351,
manufactured from commercial mild steel sheet of 2.0 mm thickness,
including hinges, jamb, lock jamb, bead and if required angle threshold of
mild steel angle of section 50x25 mm, or base ties of 2.00 mm, pressed mild
steel welded or rigidly fixed together by mechanical means, including M.S.
pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and
shock absorbers as specified and applying a coat of approved steel primer
after pre-treatment of the surface as directed by Engineer-in-charge:
Profile B Fixing with adjustable lugs with split end tail to each jamb (HSR 13.3.1.1)
1
-
-
Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately (HSR 13.3.1.2)
1
-
-
Profile C
Fixing with adjustable lugs with split end tail to each jamb (HSR 13.3.2.1)
1
-
-
Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately) (HSR 13.3.2.2)
1
-
-
Profile E
Fixing with adjustable lugs with split end tail to each jamb (HSR 13.3.3 .. 1 )
1
-
-
Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately) (HSR 13.3.3.2)
1
-
-
Fixing standard steel glazed doors, windows and ventilators in walls,
including fixing of float glass panes with glazing clips and special metal-sash
putty of approved make, or metal beading with screws, (only steel windows,
glass panes cut to size and glazing clips or metal beading with screws, shall
be supplied by department free of cost.
Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) (HSR 13.7.1)
1
-
-
Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately) (HSR 13.7.2)
1
-
-
Providing and fixing factory made ISi marked steel glazed doors, windows
and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections,
joints mitred and flash butt welded and sash bars tenoned and riveted,
including providing and fixing of hinges, pivots, including priming coat of
approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be
measured for payment).
Fixing with 15x3 mm lugs 10 cm long embedded in cementconcrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) (HSR 13.8.1 )
1
-
-
Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately) (HSR 13.8.2)
1
-
-
Providing & fixing fly proof wire gauze to windows, clerestory windows &
doors with M .S. Flat 15x3 mm and nuts & bolts complete. Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides (HSR 13.9.1)
1
-
-
Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides (HSR 13.9.2)
1
-
-
Providing & fixing glass panes with putty and glazing clips in steel doors,
windows, clerestory windows, all complete with 4.0 mm thick glass panes (HSR 13.10.1)
1
-
-
5.5 mm thick glass panes (HSR 13.10.2)
1
-
-
Extra for providing and fixing steel beading of size 1 O x 1 O x 1.6 mm (box type), approved shape and section with screws instead of glazing clips and
metal sash putty, in steel doors, windows, ventilators and composite units. (HSR 13.11)
1
-
-
Extra for providing and fixing steel beading of MS flat of size 20mm x 3mm
section For doors (HSR 13.12.1)
1
-
-
For windows (HSR 13.12.2 )
1
-
-
Providing and fixing hard drawn steel wire fabric 75 mm X 25 mm rectangular mesh with 3.25 mm dia wire fixed on steel windows of standard rolled
sections with 3 mm thick flat iron cover moulding of 12.5 mm width fixed with machine screws welded complete in all respect (HSR 13.18)
1
-
-
Providing and fixing galvanised wire mesh of average width of aperture 1.4 mm and nominal dia of wire 0.63 mm fixed on steel windows of standard
rolled steel section, with 3 mm thick MS flat iron cover moulding of 12.5 mm
width, fixed with machine screws welded complete in all respects. (HSR 13.19)
1
-
-
Providing and Fixing Poly Carbonate Sheet 1.25mm thickness on Gates and
grills excluding the cost of MS framework but including the cost of nut bolts,
Welding rods complete in all respect as per direction of Engineer-in-Charge. (HSR 13.20)
1
-
-
Providing & fixing glazing in door, window, ventilator shutters and partitions
etc. complete as per the architectural drawings and the directions of engineerin-charge. (Cost of Gasket I beading shall be paid as per respective item) Float glass panes of 5.5mm thickness (HSR 13.24.1)
1
-
-
Steel work welded in built up sections/ framed work, including cutting,
hoisting, fixing in position and applying a priming coat of approved steel
primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete (HSR 13.29.1)
1
-
-
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works (HSR 13.29.2)
1
-
-
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a
priming coat of approved steel primer, including welding and bolted with
special shaped washers etc. complete. Hot finished welded type tubes (HSR 13.30.1)
1
-
-
Hot finished seamless type tubes (HSR 13.30.2)
1
-
-
Electric resistance or induction butt welded tubes (HSR 13.30.3 )
1
-
-
Providing and fixing mild steel round holding down bolts with nuts and washer plates complete (HSR 13.31)
1
-
-
Providing and fixing bolts including nuts and washers complete (HSR 13.32)
1
-
-
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed
together at the end by end locks, mounted on specially designed pipe shaft
with brackets, side guides and arrangements for inside and outside locking
with push and pull operation complete, including the cost of providing and
fixing necessary 27.5 cm long wire springs manufactured from high tensile
steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top
cover of required thickness for rolling shutters. 80x1 .25 mm M.S. laths with 1.25 mm thick top cover (HSR 13.37.1)
1
-
-
80x1 .20 mm M.S. laths with 1.20 mm thick top cover (HSR 13.37.2)
1
-
-
80x0.90 mm M.S. laths with 0.90 mm thick top cover (HSR 13.37.3)
1
-
-
Providing and fixing ball bearing for rolling shutters. (HSR 13.38)
1
-
-
Extra for providing mechanical device chain and crank operation for operating
rolling shutters.
Exceeding 10.00 sqm and up to 16.80 sqm in the area (HSR 13.39.1)
1
-
-
Exceeding 16.80 sqm in area (HSR 13.39.2)
1
-
-
Extra for providing grilled rolling shutters manufactured out of 8 mm dia M.S. bar instead of laths as per design approved by Engineer-in- charge, (area of
grill to be measured). (HSR 13.40)
1
-
-
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and
making curvature (wherever required) and fitting the same with necessary
stainless steel nuts and bolts complete, i/c fixing the railing with necessary
accessories & stainless steel dash fasteners , stainless steel bolts etc., of
required size, on the top of the floor or the side of waist slab with suitable
arrangement as per approval of Engineer-in-charge, (for payment purpose
only weight of stainless steel members shall be considered excluding fixing
accessories such as nuts, bolts, fasteners etc.). (HSR 13.41)
1
-
-
Providing and fixing hand rail of approved size by welding etc. to steel ladder
railing, balcony railing, staircase railing and similar works, including applying
priming coat of approved steel primer. M.S. tube (HSR 13.42.1)
1
-
-
E.R.W. tubes (HSR 13.42.2)
1
-
-
G.I. pipes (HSR 13.42.3)
1
-
-
Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams during laying, including
painting the exposed portion of loop, all as per standard design complete. (HSR 13.43)
1
-
-
Open - Graded Premix Surfacing 20 mm U,ickness
Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of crushed stone aggregates of specified grading premixed in a continuous type of hot mix plant of appropriate capacity not less not less than 75 tonne per hour, with bituminous binder VG - 10 @ 1.46 kg per sqm, laid with Paver Finisher Mechanical and rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades complete as per technical clause 510 of MORT&H specifications (HSR 17.33.1)
1
-
-
Type B with VG -10 bituminous binder Providing and laying of premix sand seal coat premixed in continuous type HMP of appropriate capacity not less than 75 tonnes/ hours using specified fine aggregates and penetration grade bitumen @0.68 kg/sqm laid to specified levels, grade and cross fall complete as per technical clause 511 of MORT&H specifications. (HSR 17.36.3)
1
-
-
Patch Work with close graded Premix Surfacing/Mixed seal Surfacing 20 mm
thickness (Type B)
Providing and laying patch work with close graded premixed surfacing material of 20 mm thickness Type B using penetration grade Bitumen VG - 10 @ 1.9 kg per sqm and crushed aggregates of specified grading after trimming
the pot holes, removal of failed material, including mixing in a continuous type of HMP, carriage of mixed material and rolling with a smooth wheeled roller to match the adjoinin surface complete as per technical clause 508 of
MORT&H specifications. (HSR 17.50)
1
-
-
Providing and laying of premix sand seal coat premixed in continuous type HMP of appropriate capacity not less than 75 tonnes/ hours using
specified fine aggregates and penetration grade bitumen @0.68 kg/sqm laid to specified levels, grade and cross fall complete as per technical
clause 511 of MORT&H specifications. (HSR 17.51)
1
-
-
Removal of existing CC Block (HSR 17.67)
1
-
-
Relaying of available (removed and stacked) C.C. Block M-30 Size 450x300x150mm (HSR 17.68)
1
-
-
Providing and Laying 80 mm thick ISi marked lntertocking Paver Blocks conforming to IS 15658:2006/IRC SP 63: 2004 of all shapes and colours in design mix cement M 40 over the bed of 30 mm thick fine sand complete in all respect. (HSR 17.69.2)
1
-
-
Providing and Laying 60 mm thick ISi marked lntertocking Paver Blocks conforming to IS 15658:2006/IRC SP 63: 2004 of all shapes and colours in design mix cement M 35 over the bed of 25 mm thick fine sand complete in all respect. (HSR 17.69.3)
1
-
-
Removal of existing IPB by manual means and disposal of dismantled material with all lifts and up to a lead of 1000 m as per technical specification clause 202.3 (HSR 17.70)
1
-
-
Relaying of available (removed and stacked) Interlocking Paver Block Pavement having thickness 1 OOmm/80 mm/ 60 mm (average = 80mm) as per drawings and TechnicalSpecification Clause 1504 (HSR 17.71)
1
-
-
NS Items:-
Proving and fixing 35 mm thick glazed door and windows shutters of commercial hard wood such as hollock, champ, chikrassy and chaplash, etc. ( non-coniferous timber other than teak confirming to I.S. specifications No. 1003 kiln seasoned), with vertical styles and rails, as specified in the statement no.1 ( attached in the end of this chapter), with glass panes of 4 mm thickness , tongued and grooved including the cost of iron hinges , screws, chocks/cleats, stops , etc., complete fixed in position excluding the cost of tower bolt and handles but including the labour for fixing the same (a) 35 mm thick ( 4 mm thick glass panes) (NS)
1
-
-
Providing and applying two coats of Dr. Fixit Pidicrete URP – SBR Latex (Pidilite make) solution made of URP + cement in the proportion of 1:1.5 (as recommended by the manufacturer) on deteriorated concrete surfaces of slab and columns, complete in all respects as directed by the Engineer-in-Charge. (NS)
1
-
-
Providing and fixing 19 mm thick BWR Grade-II block board (I.S.I. mark) shutter for cabinet including cost of iron hinges, screws, etc., complete fixed in position. (NS)
1
-
-
Earth filling under floors/road/along with boundary wall/in open area with dune sand (tiba sand), brought from outside (any lead), in 15 cm layer including laying, dressing, watering ramming, consolidating, excavation, carriage, loading, unloading and compensation, etc., complete (NS)
1
-
-
Providing and fixing planking of 19 mm thick wood polymer cellka board (ISI mark) of approved make in cupboards including cutting, nails and screws, etc., fixed in position, complete in all respects as per drawing and design. (NS)
1
-
-
Providing and fixing PVC wall panelling consisting of 7mm thick hollow PVC section of Cactus or any other equivalent make (as approved by Engineer-in-Charge) PVC U-section beading of size 25mm x 8mm x 12mm and PVC angle nosing of size 25mm x 25mm x 1.5mm of Cactus or any other equivalent make (as approved by Engineer-in-Charge) including cost of PVC gutties, screws, jointed with polyfix (instant glue), complete in all respects as per drawing or as directed by Engineer-in-Charge. (NS)
1
-
-
Scraping of brick tiles of size 22.86 cm x 11.43 cm x 3.81 cm in cement mortar, complete (NS)
1
-
-
Removing of existing false ceiling tiles at all height (ceiling tiles only) of size 60 cm x 60 cm x 12 mm thick of teak wood particle board and plain board in boarder (to be removed carefully), complete in all respects as directed by Engineer-in-Charge. (NS)
1
-
-
Fixing of old false ceiling tiles at all height (ceiling tiles only) of size 60 cm x 60 cm x 12 mm thick of teak wood particle board in existing aluminium tee frame (excluding aluminium tee frame) properly maintaining 3/8” wide grooves including proper opening for light fittings, cost of screws, nails, rawl plugs, primer and painting etc. complete in all respects as directed by Engineer-in-Charge. (Note: - false ceiling tiles will be supplied by the department free of cost). (NS)
1
-
-
Tacking (making rough) the exposed reinforced cement concrete surface for cement plaster (horizontal and vertical surface) including removing of loose concrete, disposing off the malba and cleaning the surface etc., complete in all respect as directed by Engineer-in-Charge. (NS)
1
-
-
Providing and fixing 1 mm thick mat finish plastic laminated sheet ISI mark on existing wooden surface/WPC board including cost of nails and adhesive, complete in all respect as per directed by Engineer-in-charge (NS)
1
-
-
Providing and fixing 100 mm wide vertical venetian blinds of required size and shape ( Vista make select range), fixed in position including rawl plugs and screws, etc., complete in all respects as per drawing and design. (NS)
1
-
-
Providing and fixing marble strips of size 14 mm to 17 mm thick and 40 mm wide in cement concrete/ terrazzo flooring fixed in position, complete in all respects as per drawing and design or as directed by Engineer-in-Charge. (NS)
1
-
-
Providing and laying 14mm to 17mm thick Sarderali granite stone (polished) on existing work top/flooring/skirting including matching grains laid in any pattern as specified over base of 12mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade, complete in all respects as per drawing and design. (NS)
1
-
-
Providing and fixing vitrified tiles of size 1200 x 600 mm of approved make in skirting aid in any patterns as specified over base of 12 mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles (NS) Notes: i. Tile shall be premium quality (first quality) of reputed manufacturer like NITCO, KAJARIA, SOMANI, JOHNSONS, RAK, ORIENT BELL & SIMPOLO. ii. Tiles shall be fixed by using PVC spacers of required size and the space between tiles shall be filled up with cement based grout of approved make & colour. Nothing extra shall be paid for this.
1
-
-
Providing and fixing 0.60 mm thick high strength galvanized colour coated steel sheets having trapezoidal profiles of approved make (I.S.I. mark) in roofing, at all height, fixed in position with self drilling screws of approved shape & make, complete in all respects as per drawing & manufacture’s specifications and instruction of Engineer-in-Charge. (NS)
1
-
-
Providing and fixing factory manufactured cement concrete 1:2:4 kerb finished smooth and of size 1’-0” x 1’-0” x 0’-6” of required shape and design fixed at ground level along with road, complete in all respect as directed by the Engineer-in-Charge but excluding cost of cement pointing. (NS)
1
-
-
Providing and fixing factory manufactured cement concrete 1:2:4 channel finished smooth and of size 1’-0” x 1’-0” x 0’-3” of required shape and design fixed at ground level along with road, complete in all respect as directed by the Engineer-in-Charge but excluding cost of cement pointing. (NS)
1
-
-
Providing and fixing 12mm thick toughened glass AIS/Modi Guard/Saint Gobain make for door shutters duly toughened by standardized plant, with required holes and cutout for fixing accessories/allied itmes of DORMA make, complete in all respects as per architectural drawing and design or instructions of Engineer-in-Charge. (NS)
Note:- Glass accessories like handle, floor machine etc. shall be paid separately.
1
-
-
Providing and fixing 12mm thick toughened glass AIS/Modi Guard/Saint Gobain make for fixed glazing duly toughened by standardized plant with all required accessories/allied itmes of DORMA make, complete in all respects as per architectural drawing and design or instructions of Engineer-in-Charge. (NS)
1
-
-
Providing and fixing Glass Accessories i.e. handle of size 600 mm x 30 mm of DORMA make (Model XL-C-3004 ) including cost of stainless steel screws etc. complete in all respect as directed by Engineer-In-charge. (NS)
1
-
-
Providing and fixing Glass Accessories i.e. glass door package with lock (floor machine) of DORMA make (Model XL-C-4001) including cost of stainless steel screws etc. complete in all respect as directed by Engineer-In-charge. (NS)
1
-
-
Laying and consolidation of stone metal wearing coat 50 mm thick (37.5 mm compacted thickness) to BUILT UP SPRAY GROUT specification (in one layer) with crushed stone metal 53 mm to 2.8 mm gauge/ grade, key aggregate of size 22.4 mm to 2.8 mm confirming to table 500.7 as per clause 506-2.2 and bitumen spray in proportion as per design criteria specified and rolling it with road roller including the cost of stone metal, key aggregate, bitumen, road roller, etc., complete in all respect as per M.O.R.T. & H. Specification for Roads and Bridges Works (4th revision of 2001/ latest edition) (NS)
1
-
-
Laying and consolidation of stone metal wearing coat 100 mm thick (75 mm compacted thickness) to BUILT UP SPRAY GROUT specification (in two layers) with crushed stone metal 53 mm to 2.8 mm gauge/ grade, key aggregate of size 22.4 mm to 2.8 mm confirming to table 500.7 as per clause 506-2.2 and two bitumen spray in proportion as per design criteria specified and rolling it with road roller including the cost of stone metal, key aggregate, bitumen, road roller, etc., complete in all respect as per M.O.R.T. & H. Specification for Roads and Bridges Works (4th revision of 2001/ latest edition). (NS)
1
-
-
Providing and fixing at all height, fiber glass sheets of approved colour on steel trusses/ frame (excluding cost of frame) including nuts, bolts, screws and bitumen washer etc. fixed in position, complete in all respect as per architectural drawing and design. (NS)
1
-
-
Providing and fixing G.I. barbed wire fencing, weighing 13.60 kg to 15.50 kg per 100 metres (Horizontal/ diagonal )and fixed with G.I. wire of 12 gauge or by providing cut including drilling holes in the posts, complete in all respects as directed by Engineer-in-Charge (including the cost of G.I. wire used for binding which shall not be measured for payment but excluding the cost of posts, struts, earth work and concrete which is payable extra) (NS)
1
-
-
Providing and fixing G.I. barbed wire fencing, weighing 13.60 kg to 15.50 kg per 100 metres (Horizontal/ diagonal) and fixed with G.I. hooks by means of G.I. wire of 12 gauge in the RCC posts, complete in all respects as directed by Engineer-in-Charge (including the cost of G.I. wire used for binding which shall not be measured for payment but excluding cost of RCC posts, G.I. hooks and cement concrete blocks which are payable separately.) (NS)
1
-
-
Providing and fixing 8 gauge G.I. wire for making rings for reinforced concrete posts including bending, binding and placing in position, complete ( NS )
1
-
-
Providing and fixing 0’-4” long M.S. pipe of ¾” dia (middle class) embedded in RCC posts, complete in all respects as per architectural drawing and design. (NS)
1
-
-
Providing and fixing G.I. interlocking fencing of size 3”x 3” or any other size made of 10 gauge wire fixed with RCC post by means of M.S. flat & bolts/ nuts (Items of M.S. flat and bolts/ nuts shall be paid separately under HSR) including drilling holes in M.S. flats etc., complete in all respects as per architectural drawing and design. (NS)
1
-
-
Providing and fixing 8 mm thick plain bison panel of approved make in cabinet shutter/duct in frame (cost of frame and moulding/beading shall be paid separtely) fixed with machine screws including cutting, drilling holes, etc., complete in all respects as per architectural drawing and design (NS)
1
-
-
Removing of existing precast cement concrete kerbs (to be removed carefully) from road/path/plinth protection and shifting the same to maintenance store, complete in all respects as directed by the Engineer-in-Charge. (NS)
1
-
-
Removing of existing precast cement concrete channels (to be removed carefully) from road/path/plinth protection and shifting the same to maintenance store, complete in all respects as directed by the Engineer-in-Charge. (NS)
1
-
-
Fixing of existing precast cement concrete kerbs in path/road/plinth protection, complete in all respects as directed by the Engineer-in-Charge (old kerbs will be supplied by the department free of cost). (NS)
1
-
-
Fixing of existing precast cement concrete channels in path/road/plinth protection, complete in all respects as directed by the Engineer-in-Charge (old channels will be supplied by the department free of cost). (NS)
1
-
-
Providing and fixing 45 mm wide solid & 30 mm wide jail Zebra type (PCL Rainbow or any other equivalent make as approved by Engineer In charge) horizontal Venetian blinds of required size and shape, fixed in position including rawl plugs and screws etc., complete in all respect. (NS)
1
-
-
Providing and fixing concertina spiral GI wire fencing of 1'-6"/2'-0" dia or any other dia on Y-shape angle iron posts & barbed wire fencing (excluding cost of angle iron post & barbe wire fencing) weighing 150-160 kg per 100 metre, (of Make as approved by Engineer-in-Charge and confirming to IS specifications) fixed with plain GI wire of 16 gauge, complete in all respect as directed by Engineering Incharge (plain GI wire used for binding shall not be measured for payment). (NS)
1
-
-
Public Health work 343 to 610:-
Extra for fixing and jointing union couplings in G.I. and W.I. pipelines
15 mm internal diameter (HSR 20.23.1)
1
-
-
20 mm internal diameter (HSR 20.23.2)
1
-
-
25 mm internal diameter (HSR 20.23.3)
1
-
-
32 mm internal diameter (HSR 20.23.4)
1
-
-
40 mm internal diameter (HSR 20.23.5)
1
-
-
50 mm internal diameter (HSR 20.23.6)
1
-
-
Drilling and tapping cast iron pipe lines of all diameters and screwing in
ferrule and connections
Ferrule size 10 mm (HSR 20.24.1)
1
-
-
Ferrule size 15 mm (HSR 20.24.2)
1
-
-
Ferrule size 20 mm (HSR 20.24.3)
1
-
-
Cutting holes up to 23 cm through stone masonry or brick work in cement
walls for pipes and making good including repointing, replastering and
finishing according to existing finish where required
11.43 cm thick wall (HSR 20.26.1)
1
-
-
22.86 cm thick wall (HSR 20.26.2)
1
-
-
34.29 cm thick wall (HSR 20.26.3)
1
-
-
Cutting holes up to 23 cm square for pipes in floor and roofs of cement
concrete reinforced concrete or reinforced brick work and making good
including, repainting, replastering, replacing bitumen and colour or white
washing where required
75 mm thickness of roof or floor (HSR 20.28.1)
1
-
-
115 mm thickness of roof or floor (HSR 20.28.2)
1
-
-
150 mm thickness of roof or floor (HSR 20.28.3)
1
-
-
Fixing and jointing gun metal peet valves (heavy pattern) with hand wheels, on G.I. pipelines laid in the ground or inside buildings, including cartage from divisional stores or nearest railway station to site of works
15 mm internal diametre (HSR 20.31.1)
1
-
-
20 mm internal diametre (HSR 20.31.2)
1
-
-
25 mm internal diametre (HSR 20.31.3)
1
-
-
32 mm internal diametre (HSR 20.31.4)
1
-
-
40 mm internal diametre (HSR 20.31.5)
1
-
-
50 mm internal diametre (HSR 20.31.6)
1
-
-
Dismantling disjointing, removal and carriage to stores, G.I. pipelines, specials, valves and fittings.
15 mm internal diametre of the pipeline (HSR 20.50.1)
1
-
-
20 mm internal diametre of the pipeline (HSR 20.50.2 )
1
-
-
25 mm internal diametre of the pipeline (HSR 20.50.3 )
1
-
-
32 mm internal diametre of the pipeline (HSR 20.50.4 )
1
-
-
40 mm internal diametre of the pipeline (HSR 20.50.5 )
1
-
-
50 mm internal diametre of the pipeline (HSR 20.50.6 )
1
-
-
65 mm internal diametre of the pipeline (HSR 20.50.7)
1
-
-
80 mm internal diametre of the pipeline (HSR 20.50.8 )
1
-
-
100 mm internal diametre of the pipeline (HSR 20.50.9 )
1
-
-
Providing, lowering, laying, cutting (cut surface to be uniformly finished), jointing with rubber rings marked with IS : 5382 and testing of SPIGOT AND SOCKETTED RCC, NP2 MARKED WITH IS : 458-1988 and specials into trenches for all depths including carriage, loading, unloading, stacking, handling, re-handling etc. complete is all respects to the satisfaction to the Engineer - in -charge
200 mm i/d (HSR 20.62.1)
1
-
-
250 mm i/d (HSR 20.62.2)
1
-
-
Making connection with the existing G.I. branch main up to 40 mm size including cutting and threading pipe etc., complete excluding cost of tee and long screw, but including cartage of material to site (HSR 20.36)
1
-
-
Providing & fixing steel bar embedded plastic steps of size 263mm x 165mm of orange colour, confirming to specification in pump chambers, manholes etc., having minimum 3mm thick polypropylene polymer confirming to is:10910 encapsulated on 12mm dia ribbed steel bars per IS: 1786. The rate include cost of setting the same to correct lines and levels duly embedded in 1 :2:4 cement concrete including carriage, loading, uploading, stacking, handling, re-handling etc., complete in all respect to the satisfaction of Engineer-in-charge (HSR 21.28)
1
-
-
Constructing brick masonry inspection Chamber sizes as given below up to 0.60 metre average depth in cement mortar 1 :5 lime concrete with 40 per cent lime mortar 2:3 in foundation cement concrete 1 :2:4 benchingb 12mm thick cement plaster 1 :2 with a floating coat of 1 mm thick of neat cement R.C.C. 1 :2:4 slab 100 mm thick/cement concrete topping, 50mm thick: with 455mmx455mm / 455mm x610mm inside light duty C.I. inspection chamber cover and frame weight as per 1.5.1. specification painted with 3 coats of black bitumastic superior paint complete as per standard design.
Size 450 mm X450 mm inside (with 455 mm x 455 mm cover and frame light duty single seal weighing 20 kg with C.C.topping (HSR 21.84.1)
1
-
-
Size 450 mm X 600 mm inside (with 455 mm x 610 mm cover and frame single seal pattern I weighing 38 kg with C.C. topping) (HSR 21.84.2)
1
-
-
Size 600 mm X900 mm inside (with 455 mm x 455 mm cover and frame light duty single seal weighing 20 kg with R.C.C. slab) (HSR 21.84.3)
1
-
-
Extra for every 0.30 metre depth of Inspection chamber
450 mm x 450 mm inside (HSR 21.85.1)
1
-
-
450 mmx 600 mm inside (HSR 21.85.2)
1
-
-
600 mm x 900 mm inside (HSR 21.85.3)
1
-
-
Construction of rectangular standard brick masonry manhole chambers to standard drawings on S.W. pipe sewers or other circular pipe sewers up to the required depth in 1.5 cement sand mortar, lime concrete in bed and sides of pipe sewer and cement concrete 1 :2:4 in benching, 12 mm thick water tight 1 :2 cement sand plaster with a floating coat of neat cement and finished with 2 coats of sodium silicate on interior surface where required, reinforced cement concrete slab 180mm thick fixing 560 mm internal diameter C.I. manhole cover and frame weight not less than 2.5 quintal painted with 3 coats of black bitumen paint, fixing galvanised malleable iron steps embedded in 1 :2 cement sand mortar complete. the rate coversthe cost of M.S. steel for R.C.C. slab labour for fixing and carriage of C.I. manhole frame and cover and malleable iron steps from the stores of the Engineer-in-charge of the works to the site of works. The rate also indude the cost of accurately planned and fitted centring, supports for all works aswell as for all cuNes and special work, cleaning out their beds etc. sodiumsilicate shall be supplied free of cost at the stores of the Engineer-incharge.
On 150 mm internal diameter pipe sewer for 1.20 meters depth below ground level (HSR 21.90.2.1)
1
-
-
for 1.50 meters depth below ground level (HSR 21.90.2.2)
1
-
-
for 1.80 meters depth below ground level (HSR 21.90.2.3)
1
-
-
On 200 mm internal diameter pipe sewer
for 1.80 meters depth below ground level (HSR 21.90.4.1)
1
-
-
for 2.10 meters depth below ground level (HSR 21.90.4.2)
1
-
-
for 2.40 meters depth below ground level (HSR 21.90.4.3)
1
-
-
Providing and fixing SFRC MANHOLE COVERS AND FRAMES MARKED WITH IS: 12592 including setting the same to correct lines and levels in 1 :3 cement sand mortar over manhole including carriage loading unloading stacking handling re-handling etc. complete in all respects to the satisfaction to the Engineer-in-charge
Type:- Extra Heavy Duty Set (EHD-35) 560MM Clear Opening (HSR 21.93.1)
1
-
-
Type:- Extra Heavy Duty Set (EHD-20) 560MM Clear Opening (HSR 21.93.2)
1
-
-
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White vitreous chinaware Wash basin size 630x450 mm with a pair of 15 mm C. P. brass pillar taps (HSR 22.1.1)
1
-
-
White vitreous chinaware Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap (HSR 22.1.2)
1
-
-
White vitreous chinaware Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps (HSR 22.1.3)
1
-
-
White vitreous chinaware Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap (HSR 22.1.4)
1
-
-
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass
single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-
White vitreous chinaware Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer (HSR 22.2.1)
1
-
-
Supply and erection of sheet steel enclosures 1 pole/2 pole/4 pole on walVon existing pedestal complete as required
SP enclosure suitable for single pole MCB (HSR 22.3.1)
1
-
-
S.P.N. or DP enclosure suitable for DP MCB (HSR 22.3.2)
1
-
-
Providing and fixing white vitreous chinaware pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. (HSR 22.5)
1
-
-
Providing and fixing white vitreous chinaware laboratory sink with C.I.
brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and
40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : Size 450x300x150 mm (HSR 22.6.1)
1
-
-
Size 600x450x200 mm (HSR 22.6.2)
1
-
-
Providing and fixing white vitreous chinaware laboratory sink including
making all connections excluding cost of fittings :
Size 450x300x150 mm (HSR 22.7.1)
1
-
-
Size 600x450x200 mm (HSR 22.7.2)
1
-
-
Providing and fixing 15 mm C.P. brass Laboratory cock swan neck of best quality (to the approval of Engineer-in-charge).
One way (HSR 22.8.1)
1
-
-
Two way (HSR 22.8.2)
1
-
-
Three way (HSR 22.8.3)
1
-
-
Providing and fixing Stainless Steel A ISi 304 (18/8) kitchen sink as per
IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required. Kitchen sink without drain board
610x510 mm bowl depth 200 mm (HSR 22.10.2.1)
1
-
-
610x460 mm bowl depth 200 mm (HSR 22.10.2.2)
1
-
-
470x420 mm bowl depth 178 mm (HSR 22.10.2.3)
1
-
-
Providing and fixing CP Brass Single lever telephonic wall mixer of quality &make as approved by Engineer in charge.
15 mm nominal dia (HSR 22.12.1)
1
-
-
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe
32 mm dia (HSR 22.14.2.1)
1
-
-
40 mm dia (HSR 22.14.2.2)
1
-
-
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. (HSR 22.15)
1
-
-
Providing and fixing 40mm i/d G.I. waste pipe embedded in walls up to floor level including cost of union and plumber joint. (HSR 22.16)
1
-
-
Providing and fixing 40mm i/d chromium plated trap with chromium plated pipe to wall with walflange completed for use with sinks
With Bottle Trap (Indian make) (HSR 22.17.1)
1
-
-
With C.P. Brass 'P" or 'S' Trap (HSR 22.17.2)
1
-
-
Providing and fixing in position brass oxidized gas taps (to the approval of the Engineer-in-charge) complete in all respects
One way (HSR 22.18.1)
1
-
-
Two way (HSR 22.18.2)
1
-
-
Three way (HSR 22.18.3)
1
-
-
Four way (HSR 22.18.4)
1
-
-
Providing and fixing 100 mm sand cast Iron grating for gully trap. (HSR 22.19)
1
-
-
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:
White vitreous chinaware Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests (HSR 22.22.1)
1
-
-
Providing and fixing white vitreous chinaware pedestal type water closet
(European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required
W.C. pan with ISi marked white solid plastic seat and lid (HSR 22.23.1 )
1
-
-
W.C. pan with ISi marked black solid plastic seat and lid (HSR 22.23.2)
1
-
-
Providing and fixing white vitreous chinaware flat back half stall urinal of size 580x380x350 mm with white PVC flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required 2
Single half stall urinal with 5 litre P.V.C. automatic flushing cistern (HSR 22.26.1)
1
-
-
Range of two half stall urinals with 5 litre P.V.C. automatic flushing cistern (HSR 22.26.3)
1
-
-
Range of three half stall urinals with 10 litre P.V.C. automatic flushing cistern (HSR 22.26.4)
1
-
-
Range of four half stall urinals with 10 litre P.V.C. automatic flushing cistern (HSR 22.26.5)
1
-
-
Providing and fixing white vitreous chinaware water closet squatting pan
(Indian type):-
Orissa pattem W.C. pan of size 580x440 mm (HSR 22.28.2)
1
-
-
Providing and fixing white vitreous chinaware pedestal type (European type/ wash down type) water closet pan. (HSR 22.30)
1
-
-
Providing and fixing white vitreous chinaware extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous chinaware cistern / PVC cistern (with brass fitting) into the wall with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. (HSR 22.33)
1
-
-
Providing and fixing floor mounted, white vitreous chinaware single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous chinaware cistern of capacity10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. (HSR 22.34)
1
-
-
Providing and fixing solid plastic seat with lid for pedestal type W.C. pan
complete:
White solid plastic seat with lid (HSR 22.36.1)
1
-
-
Providing and fixing 8 mm dia C.P.S.S. Jet with flexible tube up to 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge. (HSR 22.38)
1
-
-
Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.
10 litre capacity - White (HSR 22.39.1)
1
-
-
10 litre capacity- coloured (HSR 22.39.2)
1
-
-
Providing and fixing toilet paper holder C.P. brass (HSR 22.42.1)
1
-
-
Vitreous chinaware (HSR 22.42.2)
1
-
-
Providing and fixing white vitreous chinaware battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge. (HSR 22.46)
1
-
-
Providing and fixing partitions for different type of urinals. Small size 680mm x 330 mm
White (HSR 22.50.1.1.1)
1
-
-
Single Colour (HSR 22.50.1.1.2)
1
-
-
Large size 835mm x 355 mm
White (HSR 22.50.1.2.1)
1
-
-
Single Colour (HSR 22.50.1.2.2)
1
-
-
Providing and fixing soil, waste and vent pipes
100 mm dia
Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 (HSR 22.51.1.2)
1
-
-
75 mm diameter
Centrifugally cast (spun) iron socketed pipe as per IS: 3989 (HSR 22.51.2.2)
1
-
-
Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc
For 100 mm dia pipe (HSR 22.53.1)
1
-
-
For 75 mm dia pipe (HSR 22.53.2)
1
-
-
Providing and fixing bend of required degree with access door, insertion
rubber washer 3 mm thick, bolts and nuts complete
100 mm dia
Sand cast iron S&S as per IS - 3989 (HSR 22.55.1.2)
1
-
-
75 mm dia
Sand cast iron S&S as per IS- 3989 (HSR 22.55.2.2)
1
-
-
Providing and fixing plain bend of required degree
100 mm dia
Sand cast iron S&S as per IS: 3989 (HSR 22.56.1.2)
1
-
-
75 mm dia
Sand cast iron S&S as per IS - 3989 (HSR 22.56.2.2)
1
-
-
Providing and fixing heel rest sanitary bend
100 mm dia
Sand cast iron S&S as per IS - 3989 (HSR 22.57.1.2)
1
-
-
75 mm dia
Sand cast iron S&S as per IS - 3989 (HSR 22.57.2.2)
1
-
-
Providing and fixing double equal junction of required degree with access
door, Insertion rubber washer 3 mm thick, bolts and nuts complete :
100x100x100x100 mm
Sand cast iron S&S as per IS- 3989 (HSR 22.58.1.2)
1
-
-
75x75x75x75 mm
Sand cast iron S&S as per IS - 3989 (HSR 22.58.2.2)
1
-
-
Providing and fixing double equal plain junction of required degree
100x100x100x100 mm
Sand cast iron S&S as per IS - 3989 (HSR 22.59.1.2)
1
-
-
75x75x75x75 mm
Sand cast iron S&S as per IS - 3989 (HSR 22.59.2.2)
1
-
-
Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.
100x100x100 mm
Sand cast iron S&S as per IS - 3989 (HSR 22.60.1.2)
1
-
-
75x75x75 mm
Sand cast iron S&S as per IS - 3989 (HSR 22.60.2.2)
1
-
-
Providing and fixing single equal plain junction of required degree
100x100x100 mm
Sand cast iron S&S as per IS - 3989 (HSR 22.61.1.2)
1
-
-
75x75x75 mm
Sand cast iron S&S as per IS - 3989 (HSR 22.61.2.2)
1
-
-
Providing and fixing collar
100 mm
Sand cast iron S&S as per IS - 3989 (HSR 22.76.1.2)
1
-
-
75mm
Sand cast iron S&S as per IS- 3989 (HSR 22.76.2.2)
1
-
-
Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron
pipes and fittings of diameter
100 mm (HSR 22.78.1)
1
-
-
75 mm (HSR 22.78.2)
1
-
-
Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally
cast (spun) iron pipes of diameter
100 mm (HSR 22.79.1)
1
-
-
75 mm (HSR 22.79.2)
1
-
-
Providing and fixing trap of self cleansing design with screwed down or
hinged grating with or without vent arm complete, including cost of cutting
and making good the walls and floors
100 mm inlet and 75 mm outlet
Sand cast iron S&S as per IS - 3989 (HSR 22.80.2.1)
1
-
-
Cutting chases in brick masonry walls for following diameter sand cast iron/centrifugally cast (spun) iron pipes and making good the same with cement concrete 1 :3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size), including necessary plaster and pointing in cement mortar 1 :4 (1 cement : 4 coarse sand)
100 mm dia (HSR 22.81.1)
1
-
-
75 mm dia (HSR 22.81.2)
1
-
-
50 mm dia (HSR 22.81.3)
1
-
-
Cutting holes up to 30x30 cm in walls including making good the same
With common burnt clay non-modular bricks (HSR 22.82.1)
1
-
-
Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement
concrete 1 :2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm
nominal size), including finishing complete so as to make it leak proof. (HSR 22.83)
1
-
-
Making hole up to 20x20 cm and embedding pipes up to 150 mm diameter in masonry and filling with cement concrete 1 :3:6 (1 cement : 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) including disposal of malba. (HSR 22.84)
1
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having
thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
Internal work - Exposed on wall 15 mm nominal outer dia Pipes (HSR 22.85.1)
1
-
-
20 mm nominal outer dia Pipes (HSR 22.85.2)
1
-
-
25 mm nominal outer dia Pipes (HSR 22.85.3)
1
-
-
32 mm nominal outer dia Pipes (HSR 22.85.4)
1
-
-
40 mm nominal outer dia Pipes (HSR 22.85.5)
1
-
-
50 mm nominal outer dia Pipes (HSR 22.85.6)
1
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having
thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
Concealed work, including cutting chases and making good the walls etc. 15 mm nominal outer dia Pipes (HSR 22.86.1)
1
-
-
20 mm nominal outer dia Pipes (HSR 22.86.2)
1
-
-
25 mm nominal outer dia Pipes (HSR 22.86.3)
1
-
-
32 mm nominal outer dia Pipes (HSR 22.86.4)
1
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having
thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.
External work
15 mm nominal outer dia Pipes (HSR 22.87.1)
1
-
-
20 mm nominal outer dia Pipes (HSR 22.87.2)
1
-
-
25 mm nominal outer dia Pipes (HSR 22.87.3)
1
-
-
32 mm nominal outer dia Pipes (HSR 22.87.4)
1
-
-
40 mm nominal outer dia Pipes (HSR 22.87.5)
1
-
-
50 mm nominal outer dia Pipes (HSR 22.87.6)
1
-
-
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c
cutting and making good the walls etc.
Internal work· Exposed on wall 15 mm dia nominal bore (HSR 22.88.1)
1
-
-
20 mm dia nominal bore (HSR 22.88.2)
1
-
-
25 mm dia nominal bore (HSR 22.88.3)
1
-
-
32 mm dia nominal bore (HSR 22.88.4)
1
-
-
40 mm dia nominal bore (HSR 22.88.5)
1
-
-
50 mm dia nominal bore (HSR 22.88.6)
1
-
-
Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c
making good the walls etc. concealed pipe, including painting with anti
corrosive bitumastic paint, cutting chases and making good the wall :
15 mm dia nominal bore (HSR 22.89.1)
1
-
-
20 mm dia nominal bore (HSR 22.89.2)
1
-
-
Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc. (HSR 22.90)
1
-
-
Providing and fixing G.I. pipes complete with G.I. fittings including trenching up to 0.30m to 1.00m depth and refilling etc
External work 15 mm dia nominal bore (HSR 22.91.1)
1
-
-
20 mm dia nominal bore (HSR 22.91.2)
1
-
-
25 mm dia nominal bore (HSR 22.91.3)
1
-
-
32 mm dia nominal bore (HSR 22.91.4)
1
-
-
40 mm dia nominal bore (HSR 22.91.5)
1
-
-
50 mm dia nominal bore (HSR 22.91.6)
1
-
-
65 mm dia nominal bore (HSR 22.91.7)
1
-
-
80 mm dia nominal bore (HSR 22.91.8)
1
-
-
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 15 mm nominal bore (HSR 22.94.1)
1
-
-
20 mm nominal bore (HSR 22.94.2)
1
-
-
25 mm nominal bore (HSR 22.94.3)
1
-
-
32 mm nominal bore (HSR 22.94.4)
1
-
-
40 mm nominal bore (HSR 22.94.5)
1
-
-
50 mm nominal bore (HSR 22.94.6)
1
-
-
Providing and fixing brass bib cock of approved quality: 15 mm nominal bore (HSR 22.96.1)
1
-
-
20 mm nominal bore (HSR 22.96.2)
1
-
-
Providing and fixing brass stop cock of approved quality: 15 mm nominal bore (HSR 22.97 .1)
1
-
-
20 mm nominal bore (HSR 22.97 .2)
1
-
-
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end):
25 mm nominal bore (HSR 22.98.1)
1
-
-
20 mm nominal bore (HSR 22.98.2)
1
-
-
32 mm nominal bore. (HSR 22.98.3)
1
-
-
40 mm nominal bore (HSR 22.98.4)
1
-
-
50 mm nominal bore (HSR 22.98.5)
1
-
-
Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main
15 mm nominal bore (HSR 22.100.1)
1
-
-
20 mm nominal bore (HSR 22.100.2)
1
-
-
25 mm nominal bore (HSR 22.100.3)
1
-
-
Providing and fixing Unplasticised PVC connection pipe with brass unions: 30 cm length
15 mm nominal bore (HSR 22.101.1.1)
1
-
-
20 mm nominal bore (HSR 22.101.1.2)
1
-
-
45 cm length 15 mm nominal bore (HSR 22.101.2.1)
1
-
-
20 mm nominal bore (HSR 22.101.2.2)
1
-
-
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet:
100 mm diameter (HSR 22.102.1)
1
-
-
150 mm diameter (HSR 22.102.2)
1
-
-
Providing and fixing ball valve (brass) of approved quality, High or low
pressure, with plastic floats complete :
15 mm nominal bore (HSR 22.103.1)
1
-
-
20 mm nominal bore (HSR 22.103.2)
1
-
-
25 mm nominal bore (HSR 22.103.3)
1
-
-
Providing and fixing C.P. brass bib cock of approved quality conforming to
IS:8931
15 mm nominal bore (HSR 22.104.1)
1
-
-
Providing and fixing C.P. brass long body bib cock of approved quality
conforming to IS standards and weighing not less than 690 gms.
15 mm nominal bore (HSR 22.106.1)
1
-
-
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore (HSR 22.107.1)
1
-
-
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore (HSR 22.108.1)
1
-
-
Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. (HSR 22.109)
1
-
-
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.
450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms (HSR 22.119.1)
1
-
-
600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. (HSR 22.119.2)
1
-
-
Providing and fixing PTMT grating of approved quality and colour
Circular type
100 mm nominal dia (HSR 22.123.1.1)
1
-
-
125 mm nominal dia with 25 mm waste hole (HSR 22.123.1.2)
1
-
-
Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms (HSR 22.127)
1
-
-
Providing and fixing C.I. sluice valves (with cap) c omplete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately)
100 mm diameter Class I (HSR 22.162.1.1)
1
-
-
100 mm diameter Class II (HSR 22.162.1.2)
1
-
-
125 mm diameter Class I (HSR 22.162.2.1)
1
-
-
125 mm diameter Class II (HSR 22.162.2.2)
1
-
-
150 mm diameter Class I (HSR 22.162.3.1)
1
-
-
150 mm diameter Class II (HSR 22.162.3.2)
1
-
-
Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1: 1 (1 cement : 1 fine sand) including testing of joints etc. complete
100 mm diameter (HSR 22.163.1)
1
-
-
150 mm diameter (HSR 22.163.2)
1
-
-
200 mm diameter (HSR 22.163.3)
1
-
-
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10
graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes
including bed concrete as per standard design
100 mm diameter S.W. pipe (HSR 22.165.1)
1
-
-
150 mm diameter S.W. pipe (HSR 22.165.2)
1
-
-
200 mm diameter S.W. pipe (HSR 22.165.3)
1
-
-
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 100x100 mm size P type With common burnt clay non-modular bricks of class designation 7 .5 (HSR 22.166.1.1)
1
-
-
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with
collars jointed with stiff mixture of cement mortar in the proportion of 1: 2 (1
cement: 2 fine sand) including testing of joints etc. complete
100 mm dia. R.C.C. pipe (HSR 22.168.1)
1
-
-
150 mm dia. R.C.C. pipe (HSR 22.168.2)
1
-
-
Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1 :4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1 :2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1 :5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1 :3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design:
With common burnt clay non-modular bricks of class designation 7.5 (HSR 22.173.1)
1
-
-
Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1 :4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 160 mm deep ( inside) with chained lid and RCC top slab 1 :2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1 :3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :
With common burnt clay non-modular bricks of class designation
7.5 (HSR 22.174.1)
1
-
-
Constructing masonry Chamber 90x90x100 cm inside, in brick work in
cement mortar 1 :4 (1 cement : 4 coarse sand) for sluice valve, with C.I.
surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm
deep (inside) with chained lid and RCC top slab 1: 2:4 mix (1 cement : 2
coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary
excavation, foundation concrete 1:5:10 (1 cement: 5 fine sand: 10 graded
stone aggregate 40 mm nominal size ) and inside plastering with cement
mortar 1 :3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating
coat of neat cement complete as per standard design
With common burnt clay non-modular bricks of class designation 7.5 (HSR 22.175.1)
1
-
-
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (HSR 22.181)
1
-
-
Supplying and fixing C.I. cover without frame for manholes:
455x610 mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg (HSR 22.200.1)
1
-
-
500 mm diameter C.I. cover (medium duty) the weight of the cover to be not less than 58 kg (HSR 22.200.2)
1
-
-
560 mm diameter C.I. cover (heavy duty) the weight of the cover to be not less than 108 kg (HSR 22.200.3)
1
-
-
Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality L D- 2.5 Rectangular shape 600x450 mm internal dimension (HSR 22.201.1.1)
1
-
-
Square shape 450 mm internal dimensions (HSR 22.201.1.2)
1
-
-
Circular shape 450 mm internal diameter (22.201.1.3)
1
-
-
MD-10
Square shape 450 mm internal dimension (HSR 22.201.2.1)
1
-
-
Circular shape 500 mm internal diameter (HSR 22.201.2.2)
1
-
-
HD - 20 Circular shape 560 mm internal diameter (HSR 22.201.3.1)
1
-
-
Supplying and fixing C.I. cover 300x300 mm without frame for gully trap each (standard pattern) the weight of cover to be not less than 4.5 kg (HSR 22.202)
1
-
-
Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. (HSR 22.209)
1
-
-
Providing and fixing in position best Indian make coat and hat hooks fixed
into wall with C.P. brass screws and rawl plugs etc. complete including
cutting and making good the walls etc. C.P Brass
One Way (HSR 22.212.1.1)
1
-
-
Two Way (HSR 22.212.1.2)
1
-
-
Providing and fixing in position best Indian make C.P. brass Tooth Brush cumTooth Paste Holder fixed in with rawl plugs with C.P. brass screws complete including cutting and making good the walls etc. Tooth Brush-cum-Tooth Paste holder (HSR 22.213.1)
1
-
-
Toothbrush Holder (HSR 22.213.2)
1
-
-
Providing and fixing in position best Indian make (to the approval of the
engineer-in-charge) storage type automatic electric water heater,
pressure/non-pressure type thermostatically controlled, suitable for operation on 230 volts, 50 cycles single phase vertical wall mounting fitted with-draw able and adjustable type AC, thermostat. Thermostat knob to be readily accessible through the opening of suitable cover for and adjustment of temperature in the installed position of heater and the thermostat should be withdrawn without having to drain the water, electric heating element made out of copper tube (heating element should be easily removed and replaced in the installed position of heater) A neon indicator 1 AMP, inner container made out of copper tinned both from inside and outside, outer container made out of mild steel sheet finished in gleaming white stove enamel paint, insulated between the inner and outer with fibre glass wool with 1 metre length of suitable capacity 3 core flexible cord with plug and non return valve plastic/lead connections or pressure release valve (where required). Complete including fixing and testing for a week (as required by Engineer-incharge. 25 Litres capacity (HSR 22.216.1)
1
-
-
30 Litres capacity (HSR 22.216.2)
1
-
-
35 Litres capacity (HSR 22.216.3)
1
-
-
40 Litres capacity (HSR 22.216.4)
1
-
-
50 Litres capacity (HSR 22.216.5)
1
-
-
Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing.
Single Socket Type B 160 mm old SWR UPVC pipe lines laid complete (HSR 22.222.2.1)
1
-
-
110 mm old SWR UPVC pipe lines laid complete (HSR 22.222.2.2)
1
-
-
90 mm old SWR UPVC pipe lines laid complete (HSR 22.222.2.3)
1
-
-
75 mm old SWR UPVC pipe lines laid complete (HSR 22.222.2.3)
1
-
-
Supply of CPVC Union couplings with brass internal fittings, complete in all respect. (NS)
For 20 mm nominal outer dia Pipes
1
-
-
For 25 mm nominal outer dia Pipes
1
-
-
For 32 mm nominal outer dia Pipes
1
-
-
For 40 mm nominal outer dia Pipes
1
-
-
For 50 mm nominal outer dia Pipes
1
-
-
For 63 mm nominal outer dia Pipes
1
-
-
Supply of CPVC ball valves with brass internal fittings, complete in all respect. (NS)
For 20 mm nominal outer dia Pipes
1
-
-
For 25 mm nominal outer dia Pipes
1
-
-
For 32 mm nominal outer dia Pipes
1
-
-
For 40 mm nominal outer dia Pipes
1
-
-
For 50 mm nominal outer dia Pipes
1
-
-
For 63 mm nominal outer dia Pipes
1
-
-
Supply and fixing of PVC floor traps (Heavy duty) of 90 mm o/dia outlet of Prince /Supreme/Skipper make, complete in all respect. (NS)
1
-
-
Supply and fixing of PVC gully traps (Heavy duty) of 100 mm dia size ( 4") with cover and frame of Prince/Supreme/skipper make complete in all respect. (NS)
1
-
-
Providing and fixing PVC specials of Prince/Supreme/Skipper make of following sizes. (NS)
(a) 100 mm i/dia
(i) HR Bend
1
-
-
(ii) Door Tee 4" x 4" x4"
1
-
-
(iii) Elbow
1
-
-
(iv) Plain Tee 4" x 4" x4"
1
-
-
(v) Cowl
1
-
-
(b) 80 mm i/dia
(i) HR Bend
1
-
-
(ii) Door Tee 3" x 3" x3"
1
-
-
(iii) Elbow
1
-
-
(iv) Plain Tee 3" x 3" x3"
1
-
-
(v) Cowl
1
-
-
Electrical works:-
Wires and Cables ;-Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in PVC Conduit etc as required.
1 run of Size 1.50 Sqmm(1/1.40mm) (HSR 23.3.6.1)
1
-
-
1 run of Size 2.50 Sqmm(1.1.80mm) (HSR 23.3.6.2)
1
-
-
1 run of Size 4 Sqmm(1/2.24mm) (HSR 23.3.6.3)
1
-
-
1 run of Size 6 Sqmm(1/2.80mm) (HSR 23.3.6.4)
1
-
-
1 run of Size 10 Sqmm(1/3.50 mm) (HSR 23.3.6.5)
1
-
-
2 run of Size 1.50 Sqmm(1/1.40mm) (HSR 23.3.6.6)
1
-
-
2 run of Size 2.50 Sqmm(1.1.80mm) (HSR 23.3.6.7)
1
-
-
2 run of Size 4 Sqmm(1/2.24mm) (HSR 23.3.6.8)
1
-
-
3 run of Size 1.50 Sqmm(1/1.40mm) (HSR 23.3.6.9)
1
-
-
3 run of Size 2.50 Sqmm(1.1.80mm) (HSR 23.3.6.10)
1
-
-
COPPER WIRING WITH MODULAR SWITCHES IN PVC CONDUIT Wiring for Light/Fan/call bell point with modular type switch/socket and GI box, Modular type face plate etc in 1.5 sqmm FRLS PVC insulated copper
conductor cable in 1.6 mm thick PVC conduit pipe. Group A (HSR 23.4.1.1)
1
-
-
Group B (HSR 23.4.1.2)
1
-
-
Group C (HSR 23.4.1.3)
1
-
-
Wiring for Light/Fan/call bell point in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe, without separate control switch
Group A (HSR 23.4.3.1)
1
-
-
Group B (HSR 23.4.3.2)
1
-
-
Group C (HSR 23.4.3.3)
1
-
-
Wiring in PVC conduit system for 3-pin 5amp. Plug point by using 2 no 1.5 sqmm FRLS copper wire and 1 no 1.5 Sqmm FRLS copper wire , including providing 1 no 5/6 Amp 3/5 pin Modular type socket and 1 no 5/6 Amp Modular type switch required GI Box ,modular face plate etc complete as required
Group A (HSR 23.4.4.1)
1
-
-
Group B (HSR 23.4.4.2)
1
-
-
Group C (HSR 23.4.4.3)
1
-
-
Wiring in PVC conduit system for 3-pin 15amp. Plug point by using 2 no 4 sqmm FRLS copper wire and 1 no 4 Sqmm FRLS copper wire for earthling , including providing 1 no 15/16 Amp 3/6 pin Modular socket and 1 no 15/16 Amp Modular switch required GI Box , modular face plate etc complete as required
Group A (HSR 23.4.5.1)
1
-
-
Group B (HSR 23.4.5.2)
1
-
-
Group C (HSR 23.4.5.3)
1
-
-
Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in existing MS/PVC Conduit etc as required. 1 run of Size 1.50 Sqmm(1/1.40mm) (HSR 23.5.6.1)
1
-
-
1 run of Size 2.50 Sqmm(1.1.80mm) (HSR 23.5.6.2)
1
-
-
1 run of Size 4 Sqmm(1/2.24mm) (HSR 23.3.6.3)
1
-
-
1 run of Size 6 Sqmm(1/2.80mm) (HSR 23.5.6.4)
1
-
-
1 run of Size 10 Sqmm(1/3.50 mm) (HSR 23.5.6.5)
1
-
-
2 run of Size 1.50 Sqmm(1/1.40mm) (HSR 23.5.6.6)
1
-
-
2 run of Size 2.50 Sqmm(1.1.80mm) (HSR 23.5.6.7)
1
-
-
2 run of Size 4 Sqmm(1/2.24mm) (HSR 23.5.6.8)
1
-
-
3 run of Size 1.50 Sqmm(1/1.40mm) (HSR 23.5.6.9)
1
-
-
3 run of Size 2.50 Sqmm(1.1.80mm) (HSR 23.5.6.10)
1
-
-
Supply and erection of PVC CONDUIT ISi marked (Medium) recessed in walVceiling etc. including the cost of PVC bends, inspection boxes, iron hooks and cement concrete etc. complete in all respect up to the entire satisfaction of Engineer-in-Charge of work. PVC pipe of 20 mm dia (HSR 23.7.6.1)
1
-
-
PVC pipe of 25 mm dia (HSR 23.7.6.2)
1
-
-
PVC pipe of 32 mm dia (HSR 23.7.6.3)
1
-
-
PVC pipe of 40 mm dia (HSR 23.7.6.4)
1
-
-
Supply and erection 5-30 A single phase A.C. energy metre, LCD display each 1920 and optical port, with rag bolts on wall/existing pedestal including the cost of rag bolts required to complete the job in all respect with necessary connections and bonding to earth. (HSR 23.8.5)
1
-
-
Supply and erection 10-60 A Three phase A.C. energy metre , LCD display each 2206 and optical port, with rag bolts on wall/existing pedestal including the cost of rag bolts required to complete the job in all respect with necessary connections and bonding to earth. (HSR 23.8.8)
1
-
-
Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects
1&2 Modules (HSR 23.8.10.1)
1
-
-
3 Modules (HSR 23.8.10.2)
1
-
-
4 Modules (HSR 23.8.10.3)
1
-
-
6 Modules (HSR 23.8.10.4)
1
-
-
8 Modules (HSR 23.8.10.5)
1
-
-
12 Modules (HSR 23.8.10.6)
1
-
-
Pdg. And fixing modular type accessorism of approved make in existing box including fixing and making necessary connections, complete in all respect. 5 amp 1 way switch (HSR 23.8.11.1)
1
-
-
5 amp 2 way switch (HSR 23.8.11.2)
1
-
-
15 amp 1 way switch (HSR 23.8.11.3)
1
-
-
5 amp Socket (HSR 23.8.11.4)
1
-
-
15 amp 6 pin Socket (HSR 23.8.11.5)
1
-
-
Bell Push (HSR 23.8.11.6)
1
-
-
step type Fan Regulator 2 modules 300 watt (HSR 23.8.11.7)
1
-
-
Telephone Socket outlet modular type (HSR 23.8.11.8)
1
-
-
TV Socket outlet modular type (HSR 23.8.11.9)
1
-
-
Blanking plate (HSR 23.8.11.10)
1
-
-
RJ 45 Computer DATA socket outlet for CAT 6 or CAT6e cable (HSR 23.8.11.11)
1
-
-
USB Charger, 1000mA, 5V, 1 Module (HSR 23.8.11.12)
1
-
-
32A D.P. Main Switch With Key Ring Tag 2 Module (HSR 23.8.11.13)
1
-
-
Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- 6 amp. To 32 amp. SP (HSR 23.22.5.1)
1
-
-
40 amp to 63 amp. SP (HSR 23.22.5.2)
1
-
-
6 amp. To 32 amp. SPN (HSR 23.22.5.3)
1
-
-
40 amp to 63 amp. SPN (HSR 23.22.5.4)
1
-
-
6 amp. To 32 amp. TP (HSR 23.22.5.5)
1
-
-
40 amp to 63 amp. TP (HSR 23.22.5.6)
1
-
-
6 amp. To 32 amp. Four Pole (HSR 23.22.5.7)
1
-
-
40 amp to 63 amp. Four Pole (HSR 23.22.5.8)
1
-
-
Supply & erection of cable tray made out of 2 mm thick galavanised perforated sheet steel including erection of the same on wall or ceiling with necessary fixture and other material required to complete the Job in all respect upto the Entire statisfaction of Engineer-in-Charge of the work. 50 x 100 mm (HSR 23.23.6.1)
1
-
-
50 x 200 mm (HSR 23.23.6.2)
1
-
-
50 x 375 mm (HSR 23.23.6.3)
1
-
-
Supply and laying of multicore telephone cable conductor size 0.51 mm bright annealed copper conductor PVC insulated and shealed in existing pipe/Channel and making necessary connection complete in all respect upto the entire satisfaction of the Engineer-in-Charge of the work. 2 pair Telephone wire (HSR 23.23.8.1)
1
-
-
5 pair Telephone wire (HSR 23.23.8.2)
1
-
-
S/E/T/C of Cat-6 cable in existing PVC conduit /PVC channel complete in all respect with all labour and material required to complete the job in all respect. (HSR 23.23.9)
1
-
-
Dismantling old wiring points ( surface wiring system ) including necessary repairs to wall etc Light, fan or call bell Point including circuit/sub main wiring (HSR 23.25.1.1)
1
-
-
Wall socket point including circuit/submain wiring (HSR 23.25.1.2)
1
-
-
Dismantling old wiring points ( Recess wiring or partly recess partly surface system , recess Conduit and box not to be dismanUed ) including necessary repairs to wall etc Light, fan or call bell Point including circuit/sub main wiring (HSR 23.25.2.1)
1
-
-
Wall socket point including circuit/submain wiring (HSR 23.25.2.2)
1
-
-
Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosure on the top etc. as required . (HSR 24.1.1)
1
-
-
Extra for using salt and charcoal / coke for pipe earth electrode as required. (HSR 24.1.2)
1
-
-
Providing and laying earth connections from earth electrode with 4.00 mm G.I. wire in 15 mm dia G.I. pipe from earth electrode as required. (HSR 24.1.11)
1
-
-
Laying of underground cable 1 metre below ground level covered with sand and bricks including excavation and refilling of trenches
2.5 Sq mm to 10 Sq mm 2 to 4 Core (HSR 24.2.2.1)
1
-
-
16 Sq mm to 35 sqmm 2 to 4 Core (HSR 24.2.2.2)
1
-
-
50 Sq mm to 150 sqmm 2 to 4 Core (HSR 24.2.2.3)
1
-
-
185 sqmm to 240 sqmm 3 to 3½ Core (HSR 24.2.2.4)
1
-
-
300 sqmm to 400 sqmm 3 to 3½ Core (HSR 24.2.2.5)
1
-
-
Laying of underground cable in pipe /existing open/closed trench etc as 2.5 Sq mm to 10 Sq mm 2 to 4 Core (HSR 24.2.4.1)
1
-
-
16 Sq mm to 35 sqmm 2 to 4 Core (HSR 24.2.4.2)
1
-
-
50 Sq mm to 150 sqmm 2 to 4 Core (HSR 24.2.4.3)
1
-
-
185 sqmm to 240 sqmm 3 to 3½ Core (HSR 24.2.4.4)
1
-
-
300 sqmm to 400 sqmm 3 to 3½ Core (HSR 24.2.4.5)
1
-
-
Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required Suitable for 70 to 120 sqmm 3 core XLPE Cable (HSR 24.3.3.1)
1
-
-
Supplying and making straight through cable jointing with heat shrinkable jointing kit complete with all accessories including ferrules suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required For 70 sqmm to 95 sqmm Cable 3 to 4 Core (HSR 24.3.5.1)
1
-
-
For 120sqmm to 150 sqmm Cable 3 to 4 Core (HSR 24.3.5.2)
1
-
-
For 185 sqmm Cable 240 sqmm cable 3 to 4 Core (HSR 24.3.5.3)
1
-
-
For 300 sqmm to 400 sqmm Cable 3 to 4 core (HSR 24.3.5.4)
1
-
-
Supply and erection of 32mm dia metre 1.5 m long bracket (B-class) each 573 making an angle of 10° to 15° with horizontal plane for mounting street light fitting fixing of GI. bracket on wall with 2 nos. 32 mm x 3 mm thick M.S. clamps including cost of cutting, welding of G.I. pipe complete with cement sand mixture, bolts and nuts etc. including necessary connections. (HSR 24.4.3)
1
-
-
Supply and errection of Hot Dip Galavanized octagonal pole 3 thichness, with base plate including of nut and bolts and all accessories as supplied by the manufacture including cost of fundation accessories etc. The foundation bolts as per manufacturer design should be hot dipped galanized pole complet of 2 nos. 100 A, 4 pole nature links including connection etc with suitable connection arrangments for 2 no. MCB/ kit kat including cost of RCC 1:1:5:3 for foundation of size 0.7 m x 0.7m x 1.8 m with minimum 8 Nos. 12 mm dia longitudinal MS reinforcement rods with rings of 8 mm dia not more than 200 mm CC for fixing the pole with all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of the work
7 M long pole with top dia 70 mm and bottom dia 130 mm with base plate of size 220 x 220 x 12mm. (HSR 24.4.8.5)
1
-
-
8M long pole with top dia 70 mm and bottom dia 135 mm with base plate of size 225 x 225 x 16mm. (HSR 24.4.8.6)
1
-
-
9 M long pole with top dia 70 mm and bottom dia 155 mm with base plate of size 260 x 260 x 16 mm. (HSR 24.4.8.7)
1
-
-
Supply and erection of weather proof MS box size 20cm x 30cm x 10cm of 16G and covered with MS sheet hinged cover having locking arrangement housed in 1:2:4 CC muff of size 40cm dia 55cm high including cost of PVC pipe of suitable size for incoming and outgoing cable, 4 copper bars of size 20 mm x 3mm, 125 mm duly tined, insulated and supported with porcelain insulator, 2 nos. 16 A 416V kit kat fixed in the MS box including painting etc complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of the work. (HSR 24.4.17)
1
-
-
Supply and errection of double walled corrugated (DWC) HDPE pipe laid 1 meter below ground level including diging and refilling of earth including cost of suitable size socket / cuppler for HDPE pipe including the cost of the labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of the work
HDPE pipe 63/50 mm outer dia/ inner dia (HSR 24.5.2.3)
1
-
-
HDPE pipe 90/75 mm outer dia/ inner dia (HSR 24.5.2.4)
2
-
-
Providing RCC foundation of M25 grade (1 Cement:1 Stone aggregate: 2 Coarse sand) i/c excavation, steel reinforcement (Fe 500) @80 kg/Cubic meter of concrete contents, concrete cover 50mm, anchor bolts etc. over a bed of PCC 1 :5: 1 O of required dimensions for octagonal poles of various heights as per following specifications complete in all respects and as per directions of Engineer-in-charge
7 Meter Octagonal Pole (HSR 24.8.5)
1
-
-
8 Meter Octagonal Pole (HSR 24.8.6)
1
-
-
9 Meter Octagonal Pole (HSR 24.8.7)
1
-
-
Providing RCC foundation of M25 grade (1 Cement:1 Stone aggregate: 2 Coarse sand) i/c excavation, steel reinforcement (Fe 500) @ 75 kg/Cubic meter of concrete contents, concrete cover 50mm, anchor bolts etc. over a bed of PCC 1:5:10 of required dimensions for high mast octagonal poles of various heights as per following specifications complete in all respects and as per directions of Engineer-in-charge
12.5 Meter High Mast (HSR 24.9.1)
1
-
-
16.0 Meter High Mast (HSR 24.9.2)
1
-
-
Digging & Refilling of trench 30 cm below ground level for erection of pipe (up to deapth of 1 Meter.) underground cable excluding the cost of cable /pipe complete in all respect. (HSR 24.10.1)
1
-
-
S/E of AC ceiling fan capacitor type complete with shackle 300mm down rod etc. Make USHA , Bajaj , Crompton (NS)
1200 mm sweep
1
-
-
S/E of AC ceiling fan capacitor type complete with shackle 300mm down rod etc. Make USHA , Bajaj , Crompton (NS)
1400 mm sweep
1
-
-
S/E of XLPE (E) 11 KV HT aluminum conductor armoured cable ISI mark laid in 1 meter below ground level with sand & bricks with all labour and material including digging and refilling of trench, required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work. (NS)
(i) 35 sqmm 3 core XLPE cable
1
-
-
(ii) 50 sqmm 3 core XLPE cable
1
-
-
(iii)120 sqmm 3 core XLPE cable
1
-
-
S/E of XLPE (E) 11 KV HT aluminum conductor armoured cable ISI mark laid in existing pipe /trenches/surface with all labour and material including required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work. (NS)
(i) 35 sqmm 3 core XLPE cable
1
-
-
(ii) 50 sqmm 3 core XLPE cable
1
-
-
(iii) 120 sqmm 3 core XLPE cable
1
-
-
Supply and erection of under ground cable 1 meter below ground level covered with sand and bricks including necessary connections, digging and refilling of trenches. (NS) (i) 16 Sq. mm 2 Core Cable . Al. Ar.
1
-
-
(ii) 16 Sq. mm 4 Core Cable . Al. Ar.
1
-
-
(iii) 25 Sq. mm 4 Core Cable .Al. Ar.
1
-
-
(iv) 50 Sq. mm 4 Core Cable .Al. Ar.
1
-
-
(v) 95 Sq. mm 3.5 Core Cable.Al. Ar.
1
-
-
(vi) 120 Sq. mm 3.5 Core Cable.Al. Ar.
1
-
-
(vii) 185 Sq. mm 3.5 Core Cable.Al. Ar.
1
-
-
(viii) 240 Sq. mm 3.5 Core Cable.Al. Ar.
1
-
-
10 pair Telephone wire jelly filled armoured cable 0.51mm copper complete in all respect. (NS)
1
-
-
20 pair Telephone wire jelly filled armoured cable 0.51mm copper complete in all respect. (NS)
1
-
-
50 pair Telephone wire jelly filled armoured cable 0.51mm copper complete in all respect. (NS)
1
-
-
S/E/T/C of RG-1 1 COAXIAL cable in existing PVC pipe /channel complete in all respect with all labour and material required to complete the job in all respect. (NS)
1
-
-
Supply and erection of heavy duty 4 pole ON load changeover load breaker switch comprising of switches 63 amp to 400 amp suitable for operation on 415 V 50 Hz AC supply complete with handle assembly having door interlock & padlocking arrangement on existing panel / including making necessary connections with petty material required to complete the job. (NS)
(i) 100Amp 4P Changeover Switch
1
-
-
(ii) 200Amp 4P Changeover Switch
1
-
-
(iii) 400Amp 4P Changeover Switch
1
-
-
(iv) 630Amp 4P Changeover Switch
1
-
-
Dismantling of over head lines comprising of copper/ aluminium over head conductor, G.I. wire, cross arms, insulators etc. as required. (NS)
1
-
-
Dismantling of pole/ street light standard/ strut embedded in brick ballast foundation etc. as required (NS)
1
-
-
Dismantling of pole/ street light standard/ strut embedded in cement concrete foundation etc. as required (NS)
1
-
-
Rewinding of Ceiling Fan complete with copper wire winding and all petty material required to complete the job after deducting old scrap winding complte in all respect (NS)
(i) 1200mm
1
-
-
(ii) 1400mm
1
-
-
Rewinding of Ceiling Fan complete with copper wire winding , bearing , small parts and all petty material required to complete the job after deducting old scrap winding complte in all respect (i) 1200mm (NS)
1
-
-
(ii) 1400mm
1
-
-
Rewinding of Exhaust Fan 300mm to 450mm complete with copper wire winding , bearing , small parts and all petty material required to complete the job after deducting old scrap winding complte in all respect (NS)
1
-
-
S/E of reccessed type≤42 watt fullwindow glare free opal diffuse LED Panel of size 595x595 mm suitable for Armstrong/POP/GB ceiling with M.S. Powder coated whire housing. Total system lumen of 42 watt LED should be 5100 or above in cool dry light (5700K), Power factor≥0.95, CRI (Ra)≥80, LED LAmp efficiency≥140lm/w, Average life50000 hours, complete with all accessories as required with connections including 3 year defect liability period and free replacement in case of non functioning of the light fixture. Make: Bajaj, Havells, Philips (NS)
1
-
-
S/E of T-8 LED tube rod 20 wattTotal system of 20 watt LED should be 2000 or above in coll day light (5700 K to 6500 K) power factor 0.95, CRI80, Average life50000 Hours Make: Bajaj, Havells, Philips (NS)
1
-
-
S/E of surface/ wall mounted ≤ 20watt integrated LED 4 feet fitting with epoxy powder coatted white/gray extruded Aluminum channel housing for efficient heat dissipation Total system of 20 watt LED should be 2000 or above in coll day light (5700 K to 6500 K) power factor 0.95, CRI80, Average life50000 Hours complete with mounting bracket and accessories./Philiphs/Wipro Make ( Industrial ) (NS)
1
-
-
S/E of surface/ wall mounted 1'*4' 36 watt ≤ 36watt integrated LED 4 feet fitting with epoxy powder coatted white/gray extruded Aluminum channel housing for efficient heat dissipation Total system of 36 watt LED should be 4000 or above in coll day light (5700 K to 6500 K) power factor 0.95, CRI80, Average life50000 Hours complete with mounting bracket and accessories./Philiphs/Wipro Make ( Industrial ) (NS)
1
-
-
S/E of Propeller type AC ventalating fans ( exhaust fan ) with necessary earthing of fan complete with louver shutter , 380mm sweep 900RPM ( Heavy Duty ) Make Orient , Usha , Khaitan , Crompton ( NS )
1
-
-
Supply and erection of PVC unsheathed copper conductor cable single core 1100 volts grade in pipe of suitable size excluding cost and erection of pipe. Cable Size 1 sqmm (14/0.03) (NS)
1
-
-
S/E of flat PVC service wire 10 sqmm 2 core aluminum complete in all respect upto the entire satisfaction of the Engineer-in-charge of work. (NS)
1
-
-
S/I/T/C of push On/OFF type 25Amp modulator type motor starter switch for AC (NS)
1
-
-
Dismentalling of 9/11 Meter PCC Pole complete in all respect and return to store as per satisfaction of EIC. (NS)
1
-
-
Erection of 9/11 Meter PCC Pole complete in all respect and pick from store as per satisfaction of EIC. (NS)
1
-
-
Dismentalling of ACSR / AB Cable from 9/11 Meter PCC Pole complete in all respect and return to store as per satisfaction of EIC.(NS)
1
-
-
Erection of ACSR/AB Cable from 9/11 Meter PCC Pole complete in all respect and pick from store as per satisfaction of EIC.(NS)
1
-
-
Dismentalling of existing Window Air Conditioner 1.0 ton to 2.0 ton with stablizer , copper piping etc in all respect and return to store as per satisfaction of EIC. (NS)
1
-
-
Erection of Window Air Conditioner 1.0 ton to 2.0 tonwith stablizer , copper piping etc in all respect and pick from store as per satisfaction of EIC. (NS)
1
-
-
Dismentalling of existing Split Air Conditioner 1.0 ton to 2.0 ton with stablizer , copper piping etc in all respect and return to store as per satisfaction of EIC. (NS)
1
-
-
Erection of Split Air Conditioner 1.0 ton to 2.0 ton with stablizer , copper piping etc in all respect and pick from store as per satisfaction of EIC. (NS)
1
-
-
Replacement of Old Compressor with new compressor 1.0 ton to 2.0 ton after decucting cost of old compressor etc in all respect and return to store as per satisfaction of EIC.
Re- filling of R410A/R32 Air conditioner Gas in Split/Window 1.0 ton to 2.0 ton AC complete in all respect. (NS)
1
-
-
S/E of trenchless boring of road by HDD machine for laying required size of HDPE pipe 6" with socket reducer as per dia of cable at the end of pipe to closed the end of pipe to avoid entering of sand in pipe and all petty material required to complete the job as per entire satisfaction of the EIC. (NS)
1
-
-
Labour Charges of Dehydration of Transformer Oil complete with Labour for empty , refilling and other overhead charges but excluding of oil upto satisfaction of EIC. (NS)
(i) upto 100/125KVA
1
-
-
(ii) Upto 200/250KVA
1
-
-
(iii) Upto 400/500/630KVA
1
-
-
Supply of fresh transformer oil for existing transformers in university/outside KVK's station complete with filling, transportation etc. (NS)
1
-
-
Shifting of Existing Transformer upto 630KVA including cost of hydra , vehicle ,dismentalling of connection and reconnection of at new place complete in all respect upto entire satisfaction of EIC. upto 100/125KVA (NS)
1
-
-
Upto 200/250KVA (NS)
1
-
-
Upto 400/500/630KVA (NS)
1
-
-
Making of Suitable size foundations as per design of transformer upto 630KVA including cost of material required for making suitable caoacity foundation as per the design of manufacturers complete in all respect upto entire satisfaction of EIC.Providing RCC foundation of M20 grade (1 Cement:1.5 Stone aggregate: 3 Coarse sand) i/c excavation, steel reinforcement (Fe 500) @ 50 kg/Cubic meter of concrete contents, concrete cover 50mm, over a bed of 75mm thick PCC 1:5:10, of required dimensions as per OEM recommendations to provide levelled surface for placement of the DG set complete in all respects and as per directions of Engineer-in-charge (Size of foundation assumed = 5.0x1 .Bx1 .Om) (NS)
upto 100/125KVA
1
-
-
Upto 200/250KVA (NS)
1
-
-
Upto 400/500/630KVA (NS)
1
-
-
Hiring Charges of 62.5 KVA DG set complete with to and fro from supplier end to university campus including freight but excluding cost of oil . (NS)
1
-
-
Hiring Charges of 125 KVA DG set complete with to and fro from supplier end to university campus including freight but excluding cost of oil . (NS)
1
-
-
Hiring Charges of 250 KVA DG set complete with to and fro from supplier end to university campus including freight but excluding cost of oil . (NS)
1
-
-
Repair / Service of 11KV VCB complete with accessories details are :- (NS)
(i) TNC Switch
1
-
-
(ii) Digital Ammeter
1
-
-
(iii) Servicing Charges
1
-
-
(iv) Shunt
1
-
-
(v) Motor,gear box , girrari , Mechanism
1
-
-
(vi) 11KV SF6 Breaker Service complete
1
-
-
Supply , installation , testing and commissioning of 24 port POE Access switch with the 3 year free comprehensive warranty period and 24*7 direct OEM TAC spot including cost of petty material required to complete the work upto the entire satisfaction of EIC having following techanical specification switch shoul offer wire speed and non blocking switching with 24 / 10 /100 /1000 RJ 45 POE / POE +ethernet ports and additional for SFP + ( IG/10G) fibre based ports , minimum 2 port populated with 10G MMF Access switches should spot non blocking switching fabric capacity of minimum 88 GB PS and minimum line rate forwarding capacity of 57 MPPS access switch shoul spot minimum 16KMAC addresses and minimum 4K active VLANs Acess switch shoul have stacking capability with minimum stacking band with widthof 40GBPS and should spot minimum of 8 unit stack from day 1 . (NS)
1
-
-
S/E of lED street light of system voltage ≤70 watt IP 66 multiple LED with lens optics and pressure die-cast aluminium housing for effective thermal management. Total system lumen of ≤70 watt LED should be 8400 or above in cool day light.(5700K), Lumen efficieny 120 lm/W, power factor≥0.95, CRI≥ 70, avg. life≥5000 hours, complete with all accessories as required with connections including 3 years defect liability period and free rreplacement in case of non-functioning of the light fixture Make Havells, Bajaj , Philiphs (NS)
1
-
-
S/E of lED street light of system voltage ≤90 watt IP 66 multiple LED with lens optics and pressure die-cast aluminium housing for effective thermal management. Total system lumen of ≤90 watt LED should be 10800 or above in cool day light.(5700K), Lumen efficieny 120 lm/W, power factor≥0.95, CRI≥ 70, avg. life≥5000 hours, complete with all accessories as required with connections including 3 years defect liability period and free rreplacement in case of non-functioning of the light fixture Make Havells, Bajaj , Philiphs (NS)
1
-
-
S/E of double arm street light bracket of size 1.5 Meter long made of 32/50 mm dia GI pipe B-class ISI, with collerr pipe (GI) 75mm dia 300mm long duly welded, painted with 2 coats of aluminium paint on bracket for fixing on the existing 7 Meter. Hot Dip galvanized octagonal pole complete the job in all respects. (NS)
1
-
-
S/E of single arm street light bracket of size 1.5 Meter long made of 32/50 mm dia GI pipe B-class ISI, with collerr pipe (GI) 75mm dia 300mm long duly welded, painted with 2 coats of aluminium paint on bracket for fixing on the existing 7 Meter. Hot Dip galvanized octagonal pole complete the job in all respects.(NS)
1
-
-
Supply Installation testing & commissioning of 6-core Multimode OM3 OFC including cost of petty material required to complete the work upto the entire satisfaction of Engineer In Charge. (MAKE : Molex/Siemon/Dlink) (NS)
1
-
-
Supply Installation testing & commissioning of 12-core Multimode OM3 OFC including cost of petty material required to complete the work upto the entire satisfaction of Engineer In Charge. (MAKE : Molex/Siemon/Dlink) (NS)
1
-
-
Supply Installation testing & commissioning of Om3 Fibre Patch cord duplex including cost of petty material required to complete the work upto the entire satisfaction of Engineer In Charge. (MAKE : Molex/Siemon/Dlink) (NS)
1
-
-
Supply & Erection of Termination Kit of OM3 OFC 6/12 Pair Cables complete with Labour for Filling in all respect. (NS)
1
-
-
Supply & Erection of Jointing Kit of OM3 OFC 6/12 Pair Cables Cables complete with Labour for Filling in all respect. (NS)
1
-
-
Labour Charges of Splishing Jointing Kit of OM3 OFC Cables complete with Labour for Filling in all respect. (NS)
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements