Chaudhary Charan Singh Haryana Agricultural University Tender

Sound Reinforcement System SITC Speaker EN 54-24 Certified 20W wall mount speaker with excellent speech & High-fidelity music reproduction Max Power: 30W,Rated Power: 20Watts, Power Tapping:20/10/5/2.5W Effective frequency range(-10 dB) : 90 Hz to 20KHz SPL at rated power (1Khz at 1 m) 101 dB Opening Angle 1 KHz / 4 KHz (-6 dB): 174° / 136° (hor.) 127° / 141° (ver.) Woofer :- 5 inch ; tweeter 1inch; Cabinet and front grill :- Aluminium Operating Temp : -25°C to +55°C ; RH95% EN60065; UL 94 V0 ;  Water & Dust protection :- EN60529 IP 65 Make: Bosch / Bayerdynamics/senneheiser

Power Mixer SITC of Powered Mixer ideal for installs with inbuilt Class D amplifier, Max. midband output power, 1 kHz, THD = 1%, dual channel into 4 Ω :2 x 450 W into 8 Ω: 2 x 270 W , also capable of Direct-Drive option for 100V speaker lines. Frequency response, -3 dB, ref. 1 kHz,Any input to any Mixer output 15–22000 Hz.Crosstalk, 1 kHz Amplifier Ch1/Ch2 -85 dB.5 MIC/LINE input channels with compressor / limiter and talk-over function, 3 Stereo Inputs including Jack, RCA and USB connectors, onboard player for MP3 or WAV audio files, high quality effects section with 32 editable presets, 3 Master outputs with 7-band EQ each and flexible signal routing options, delay line for Master-B (150 msec / 50m), Auxiliaries (FX, AUX) 1 Post, 1 Pre ,Input impedances MIC 2 kΩ CD 10 kΩ All other inputs 15 kΩ, headphones control, LPN speaker processing, , comprehensive protection package, , optional rack mount kit. Make: Bosch / Bayerdynamics/senneheiser

Wireless Handheld Mic SITC of Handheld Wireless Mic with Cardiod polar pattern for transmitter,Dynamic microphone with Neodymium magnet , Receiver frequency response 80Hz-18kHz,Receiver RF sensitivity 1.0 µV,Receiver Image rejection55dB,Receiver Dyanmic range 95dB and receiver  having 32 channels possible,Receiver S/N ratio 100dB A,distortion 1 %, Transmitter sensitivity - 3.2 mV/Pa,modulation:+/-40kHz            Make: Bosch / Bayerdynamics/senneheiser                                                                                                               

Wireless Lapel Mic SITC of Wireless Lapel Mic with Cardiod polar pattern for transmitter , Receiver & Transmitter frequency response 100Hz-18kHz or better,Receiver RF sensitivity 1.0 µV,Receiver Image rejection55dB,Receiver Dyanmic range 95dB and receiver  having 32 channels possible,Receiver S/N ratio 100dB A,distortion 1 %, Transmitter sensitivity - 5.6 mV/Pa,modulation:+/-40kHz       Make: Bosch / Bayerdynamics/senneheiser

Supply, Installation, Testing and Commissioning of Interactive Flat Panel Wall Mount - Technology TFT LCD with DLED Backlit; Display size (diagonal) 86" or Higher. Aspect Ratio 16:09; Resolution 3840 x 2160 4K Ultra HD; Flicker Free Yes with Blue Light Filter; static contrast ratio 1200:1 (typ): brightness 350 nits:display clour 1.07B colours:input ports HDMI x 3:VGAx1;display portx1;audiox1;CVBS(AV);RS232x1;PC slotx2;Slotin for pc built inx1;Wifi module slot built in x 1;output port HDMI x1;audio (earphone out)x1;SPIDFx1;LAN RJ45 x1;USB3.0 type A x3;2.0 typeA x3;2.0 type B(for touch) x2 ;Speaker 16 w x2 ;Touch type :IR recognition;touch resolution:32767x32767,Touch point:20 points;writing :10 points;response time15ms;support:windows 10/windows8/windows7/windowsXP/Vista/LInux/MAC/ANdroid/wince/Chrome;embedded player CPU inbuilt Android Version:5.1;CPU:ARM quad core cortex A53 1.2Ghz;GPU ARM Mali-450 MP 4;Memory:2 GB;Storage:16GB eMMC;Networking:10/100M auto-identtification and DHCP;Anti Scratch-Anti Glare Minimum 7 H scratch resistant and anti glare ;mirror extending flexibility to allow content to be mirrored on two IFB simultanesouly through HDMI out.Save option built in save option directly to Google Drive and One Drive. QR Code Scan:In Android Mode should have File download feature in smart phone just by scanning the QR code. Email: In Android juts by pressing of a icon the email should get generated and it should have facility to get the annotation/session attached as PDFautomatically. Split Screen: Should have the feature, built-in facility to split the screen in 2,3,4,5 or max.6 for simultaneous function/working on various application at the same time from a single PC. Annotation/Writing: Should be able to write on a Blank screen and on any application -PPT, Word, Excel, PDT, Web Browser, Video etc. Floating Tool: Should have floating tools which should appear just by press of 2 fingers for writing/annotation. Recording: It should also have recording function of Audio and Video. Quiz Built in Tool to allow participants to submit answwers from their Smart Phones, Zoom Video Conferencing - Built-in PC with IFP Core i5, DDR4 8GB, 2.5",128 GB SATA S3 SSD, Network: Wireless 802.11; Make: View Sonic/Samsung/Sony

Supply, Installation, Testing and Commissioning of Digital Podium – Material: Mild Steel; Should have Tray for Keyboard. ( Keyboard Dimension Standard Lenovo Keyboard); Should have built-in Visualizer and 19” Interactive Panel .It should also have the flexible options in sizes for the 19” or 21.5” Interactive Panel to fit in; Interactive Panel motorised positioning up and down as per the user convenience; Should have single Sliding tray to Protect the Interactive panel and for the controller;The top of the Podium should be wooden. Should have a space for the Desktop PC and for the equipments to fit in as per the International standards. Sliding Shelf 1) For Placement of extra laptop or Document 2) Drawer For Visualizer with Lock; Door Lock – Yes. Central Control System Should be able to control from the Controller with easy identified keys - Projector On Off , Motorised Screen Up & Down , Switching between PC, Visual Presenter and laptop, Volume Control. Front Panel should have- 17 Membrane keys for control, Power Plug 0f 220 Volt Power out for Laptop etc.,VGA Port X 01, 3.5mm Audio Input X 01,Network Port wired Internet x 01,USB X 02 Ports ,Ports for 6.35mm Microphone Input Back Panel of the Controller should have - Should have Projector IR Controller ,Should have 1 RS 232 Projector Control ,Should have 2 x 2 VGA matrix, Should have 2 HDMI Input and 1 HDMI Out, Should have 2 USB Ports for front, Connectivity, Should have Network Port for front connectivity, Should have2 Video In and 2 Video out, 2 Audio (Left) in , 2 Audio (Right) in, Should have 1 x Projector Power , 1 x Electric Screen Power; Built-in inputs on the left hand side : HDMI x 1, VGA x 1, USB Ports x 2, Power Plug x 1, Audio Mini In x 1, RJ 45 x 1, Microphone Input x 1, Video In x 1, Audio in ( Left and Right) x 2 Signal Switching :The Interactive Monitor touch should work independently for the both Laptop and PC. Whichever source is selected PC/Laptop when both are connected to the Podium the content should appear on Interactive Panel along with touch activated of the selected source, automatically without detaching or attaching a cable. CPU: Core i5 equivalent processor; Suitable express Chipset; 8GB RAM, 1TB HDD; OS: Windows 8 / 10; Keyboard and Mouse Built-in Audio Microphones: 1 x Gooseneck Mike: Frequency range 50 – 70000 Hz, Output Impedance at 1000Hz Should be rated at 150 Ω ; Dynamic range and 1kΩ load- 96.2dB ; Interactive Panel Panel Type;Active Matrix Color TFT; Display Size:19” or higher; Resolution: 1024 x 768 pixels; Brightness: 250cd/m2 or higher ; Contrast: 1000:1; Connectivity : RGB/VGA ; Interface: USB; Make: ATDSC/LABWE/AHA

Supply Installation, Testing of Splitter : 1 In 4 Out including the cost of all petty material required to complete the job upto the entire satisfaction of Engineer-in-charge. Make : Vention/Logic/Kramer

Supply Installation, Testing and Commissioning of POE Switch : 8 Port including the cost of all petty material required to complete the job upto the entire satisfaction of Engineer-in-charge. Male : CISCO/Ruckus/Brocade

Supply Installation, Testing and Commissioning of Rack : 6U Rack with accessories including the cost of all petty material required to complete the job upto the entire satisfaction of Engineer-in-charge. Make : Vpro

Supply installation, testing and commissioning of LED TV : Size 48" 4K including the cost of stand & mounting arrangement with all petty material required to complete the job upto the entire satisfaction of Engineer-in-charge. Make: Sony/Panasonic

All types of cables (Cat-6, HDMI, XLR/microphone cable of any length) and connectors required to complete the job in all respect i.e. connectivity of podium to IFP to delegate unit and viceversa to run all the equipments in tandem. Make: Krammer/Sommer/Belden/Bosch LBB 4116/00+LBB4119/00) / Bayerdynamics/senneheiser

Supply Installation testing & commissioning of AP Management License with 3 years comprehensive warranty period including cost of petty material required to complete the work upto the entire satisfaction of Engineer In Charge. MAKE : RUCKUS/CISCO/ARUBA

Supply Installation testing & commissioning of Indoor Access Point with secure Mounting Bracket and with 3 Year free comprehensive warranty period including cost of petty material required to complete the work upto the entire satisfaction of Engineer In Charge having following technical specifications : The Access Point should have 2 auto MDX, auto-sensing 10/100/1000 Mbps RJ-45, with POE support on one port, and one USB port. AP should be IOT ready from day 1. The APs should support the IEEE 802.11a, 802.11b, 802.11g , 802.11n & 802.11ac Wave2 standards. It should support minimum 3 MU-MIMO clients simalteniously. The AP must support Dual Band Concurrent Operation - 2.4GHz and 5GHz. Should support 3 spatial streams on both radio bands for an aggregate capacity of 1.75 Gbps including 450Mbps on 2.4Ghz. The AP shall have a Minimum Rx Sensitivity of -100 dBm. The access points should be centrally managed. In some small isolated environments the AP should be able to function as a full-fledged stand-alone access point without the requirement of a controller. Security mechanisms should be in place to protect the communication between the Access Point controller and the Access Points. Since most radio interference come from the WLAN network itself the vendor should specify what mechanisms such as beam steering/ adaptive antenna technology/ beamforming are available in combination to focus the energy on the destination STA and minimize radio interference with the surrounding of the AP. The vendor should specify if the activation of such feature is still compatible with 802.11n spatial multiplexing. Since the WLAN network will be using an unlicensed band the solution should have mechanisms that reduce the impact of interference generated by other radio equipment operating in the same band. The access point should be able to detect clients that have dual band capability and automatically steer those client to use the 5GHz band instead of the 2.4GHz band. The antennas to be dual polarised and should be integrated inside the access point enclosure to minimize damage and create a low profile unit that does not stand out visually. The access point should support 802.1q VLAN tagging The access point should support WPA2 enterprise authentication and AES/CCMP encryption. AP should support Authentication via 802.1X and Active Directory. Implement Wi-Fi alliance standards WMM, 802.11d, 802.11h and 802.11e The Access Point should provide for concurrent support for high definition IP Video, Voice and Data application without needing any configuration. This feature should be demonstratable. Support RF auto-channel selection by the following methods: a) measuring energy levels on the channel; b) monitoring for 802.11 signal structures and; (c) detecting radar pulses. Other similar forms of smart selection shall also be accepted. Channel selection based on measuring throughput capacity in real time and switching to another channel should the capacity fall below the statistical average of all channels without using background scanning as a method. AP should provide minimum 23 dBm Radio output power for 2.4Ghz and 5Ghz both. (EIRP should be limited as per govt regulation for indoor AP's). Should support Transmit power tuning in 1dB increments in order to reduce interference and RF hazards . Device antenna gain (integrated) must be at least 3dBi and should provide automatic interference rejection of about 10dB. Upto 16 BSSIDs per AP for multiple differentiated user services (e.g. voice). Should support upto 500 clients per AP. Should support IPv4 and IPv6 from day one. The access point should support following security mechanism: WEP, WPA-PSK, WPA-TKIP, WPA2 AES, 802.11i. System should support Authentication via 802.1X, local authentication database, support for RADIUS and Active Directory. Mechanism for physical device locking using padlock /Kensington lock / equivalent. Operating Temperature: 0°C - 40°C, Operating Humidity: upto 95% non-condensing. Should be UL 2043 plenum rated and comply to WEEE/RoHS. Should be EN 60601-1-2 Medical compliant. Should be WPC approved; ETA certificate to be enclosed. MAKE : RUCKUS/CISCO/ARUBA