Bridge And Roof Company India Limited Tender
If you want to inquire about any e-tender the Haryana government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Haryana tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Haryana etender you're looking for. Read further to learn how to search and bid for etender Haryana.
Technical
Technical
Financial
Class Of Bidder
... View More
Class-I Local Supplier and Class-II Local Supplier.
Bid Capacity
... View More
To determine the bid capacity, the bidder should have successfully executed "Similar Works" of a certain value during the last 07 years. The experience criteria include: i) 03 similar completed works each costing not less than Rs. 1.50 Crore, ii) 02 similar completed works each costing not less than Rs. 1.88 Crore, or iii) 01 similar completed work costing not less than Rs. 3.01 Crore. The value of executed works is brought to the current costing level by enhancing the actual value at a simple rate of 7% per annum. Additionally, the average Annual Financial Turnover during the last 03 years should not be less than Rs.1.13 Crore, and the Net worth should be positive.
Technical Capacity
... View More
The required prior work experience for the bidder involves successfully executing similar works of a certain value during the last 7 years. The experience criteria are as follows: - 03 similar completed works each costing not less than Rs. 1.50 Crore, - OR 02 similar completed works each costing not less than Rs. 1.88 Crore, - OR 01 similar completed work costing not less than Rs. 3.01 Crore.
For running works, substantial completion should not be less than 80% (value-wise). The value of executed works shall be brought to the current costing level by enhancing the actual value of work at a simple rate of 7% per annum. However, specific information on the required prior work experience for the bidder's key supervisory personnel is not mentioned.
Costs
EMD
₹ 7,53,000Document Cost
₹ 14,809Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_BandR_846260_1Tender No
BANDR/HO/71148/INSTRUMENTATION /NIT/SC/03Tender Authority
Bridge And Roof Company India Limited ViewPurchaser Address
-Website
http://eprocure.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
eNIT-INSTRUMNT-71148-Pkg-I-AND-III-SC-03
BOQ Items
... More
In Carbon Steel as per Standard 7-52-0433/1113
3
2774
8322
... More
In Carbon Steel as per Standard 7-52-1210
1
2774
2774
... More
In Carbon Steel as per Standard 7-52-0432/1112
20
2774
55480
... More
Stainless Steel as per standard 7-52-1112
1
2774
2774
... More
VORTEX FLOWMETERS
-
-
-
... More
Installation of integral/remote transmitters/ Preamplifier for Vortex flowmeter on yoke/ instrument including laying and termination of interconnection cables with supports as necessary and painting of supports but exclusive of Supply of Instrument, yoke and Calibration.
-
-
-
... More
Installation of Transmitters/ Preamplifiers for Vortex Flowmeters
2
9320
18640
... More
ULTRASONIC FLOWMETER
-
-
-
... More
Installation of Transmitters/ Preamplifiers for ultrasonic flowmeters on yoke/ instrument (if required) including Straight length spool piece with pressure and temperature compensation loop including laying and termination of interconnection cable supports for cables as required, painting of supports but exclusive of supply of instrument, yoke and calibration.
-
-
-
... More
Installation of Transmitters/ Preamplifiers for Ultrasonic Flowmeters
2
5810
11620
... More
DIFFERENTIAL PRESSURE (LEVEL) TRANSMITTERS (Excl. supply of Impulse pipe/Tubing material)
-
-
-
... More
Installation of DP type/ Diaphragm Seal DP type Level Instrument including mounting on Yoke, supply of supports for impulse line/ capillary/ manifold, fabrication of manifolds and erection wherever required, laying of capillary on supports, fabrication and installation of impulse lines with support as per Standard indicated below, hydraulic testing and painting of supports but exclusive of Supply of Instrument, Piping material, all Electrical/ Pneumatic connections, Yoke and Calibration.
-
-
-
... More
In Carbon Steel as per Standard 7-52-1566
1
9320
9320
... More
SPECIAL LEVEL/ GUIDED WAVE / ECCLIPSE TYPE RADAR LEVEL INSTRUMENTS
-
-
-
... More
Installation of Guided Wave/ Ecclipse type radar level instruments with or without controllers including installation of instruments on nozzles, changing of head orientation wherever required, fabrication and installation of primary piping, drain valve / vent valve assembly as per standard and hydraulic testing of instrument but exclusive of supply of instruments, piping materials, all electrical/ pneumatic connections and calibration.
-
-
-
... More
In Carbon Steel as per Standard B269-7-52-3306
2
21304
42608
... More
MAGNETIC LEVEL GAUGES
-
-
-
... More
Installation of Magnetic Level Gauges on Vessel/ Piping/ Stand pipes with minor modification wherever required, providing intermediate supports wherever necessary fabrication and installation of drain valve/ vent valve assembly as per Standard Nos. indicated below, hydraulic testing of gauge, exclusive of Supply of Instruments, Piping materials and Calibration.
-
-
-
... More
In Carbon Steel as per Standard B269-7-52-3501
2
3861
7722
... More
RADAR LEVEL INSTRUMENTS
-
-
-
... More
Installation of radar sensor and antenna, flanged type connection on equipment nozzle/ rail mounting with/without still well, but exclusive of supply of instruments. Installation of electronics units (total system for indication, transmission, marshalling etc. for one tank), including mounting on Yoke, supply of angle tray with supports, fabrication and erection of supports and laying of cable up to instrument/probe with clamps, termination of cables at both ends, but exclusive of supply of Instruments, supply of yokes and Calibration.
-
-
-
... More
Installation of Top Mounted Radar
7
4328
30296
... More
PRESSURE INSTRUMENTS (Excl. supply Impulse pipe/Tubing materials)
-
-
-
... More
Installation of Pressure Transmitters/ Pressure Switches (with or without Pulsation Dampener, Over-range Protector)/ Diaphragm seal type Pressure Transmitters/ Diaphragm seal type Pressure Switches including mounting on Yoke/ Surface, supply of supports for capillary, supply and erection of supports for impulse lines wherever required, fabrication and installation of manifolds/ impulse lines with supports as per Standard indicated below, laying of capillary on supports, hydraulic testing and painting of supports but exclusive of Supply of Instrument, Piping/tubing materials, all Electrical/ Pneumatic connections, Yoke and Calibration.
-
-
-
... More
In Carbon Steel as per Standard 7-52-1143
5
1061
5305
... More
In carbon steel as per Standard B269-7-52-2104
1
1061
1061
... More
Carbon steel as per Standard B269-7-52-3137
1
5326
5326
... More
Stainless Steel as per standard 7-52-1143
1
1097
1097
... More
in carbon steel as per standard B269-7-52-3132
1
5326
5326
... More
TEMPERATURE INSTRUMENTS
-
-
-
... More
Installation of Temperature Indicators/ Gauges (Filled system/ Bimetallic) RTD/ Thermocouple/ Temperature Switches/ Temperature transmitters with flanged thermowell inclusive of installation of machined/ built-up thermowells on the nozzle and installation of Instruments, Electrical/ Pneumatic connection but exclusive of Supply of Instruments/ Elements/ Thermowell, and Calibration.
-
-
-
... More
Temperature Indicator/ Gauges (Filled System) with thermowell on flanged wells
1
1008
1008
... More
Temperature Indicator/ Gauges (Bimetallic Type) with thermowell on flanged wells
12
1008
12096
... More
Test Thermowell (flanged)
3
644
1932
... More
TEMPERATURE TRANSMITTERS (REMOTE MOUNTED)
-
-
-
... More
Thermocouple/ RTD element with thermowell, along with Temperature Transmitter remote mounted. Installation of transmitter including mounting on yoke, fabrication and erection of supports with clamps and laying of extension/RTD cable upto thermocouple, termination of cables at both ends, painting of supports but exclusive of Supply of Instruments, Cable, Yoke and Calibration.
-
-
-
... More
Temperature Transmitter and Thermocouple with flanged well
25
1665
41625
... More
Temperature Transmitter only
6
1465
8790
... More
INSTALLATION OF SURGE PROTECTORS IN FIELD EQUIPMENT
-
-
-
... More
Installation of Surge protector
-
-
-
... More
Installation of Surge protector
6
2996
17976
... More
INSTALLATION OF WIRELESS REPEATERS/GATEWAYS/ANTENNA
-
-
-
... More
Installation of wireless repeaters/gateways/ antenna on yoke but exclusive of supply of wireless repeaters/gateways/antenna, yoke and calibration.
-
-
-
... More
Installation of wireless repeaters/gateways/ antenna on yoke but exclusive of supply of wireless repeaters/gateways/antenna, yoke and calibration.
2
2029
4058
... More
ANALYZERS AND GAS CHROMATOGRAPH
-
-
-
... More
Installation of pH Analyzer of submersion type probe/ flow thru type probe/retractable type probe with sampling system consisting of pressure reducing valve, safety valve, needle valve etc. (duly mentioned in a box /plate/ rack), sample cell (Electrode assembly) and preamplifier/ transmitter mounted on Yoke including installation of cell, sampling system, preamplifier/ transmitter, interconnecting tubing and cabling between cell and sampling system/transmitter, interconnection of all cables and tubes/pipes, supply, fabrication and erection of supports impulse line/ interconnecting cables etc. and hydraulic testing, painting of supports but exclusive of Supply of Analyzer and its accessories, all interconnecting Piping/ Tubing, Calibration and Testing.
-
-
-
... More
pH analyser installation - Flow through type
1
10550
10550
... More
Installation of Conductivity type Analyzer including sample cell with sampling system, pressure reducing valve, pressure relief valve, needle valve etc., and transmitter/ preamplifier with/ without pre-assembled assembly on yoke/ fabricated each including installation/ assembly of cell, sampling system, preamplifier/ transmitter, interconnecting tubing/ piping and cabling, laying and interconnection of all cables/ tubes/ pipes, fabrication and installation of manifolds/ impulse lines with supports, supply and installation of supports for impulse lines, hydraulic testing of impulse lines, painting of supports but exclusive of Supply of Analyzer and its accessories, all interconnecting Piping/ Tubing materials, all electrical/ Pneumatic connections, yoke/ rack and Calibration.
-
-
-
... More
Conductivity type Analyser installation
2
9654
19308
... More
Installation of Water Quality Analyzer including sample cell with sampling system, pressure reducing valve, pressure relief valve, needle valve etc., and transmitter/ preamplifier with/ without pre-assembled assembly on yoke/ fabricated each including installation/ assembly of cell, sampling system, preamplifier/ transmitter, interconnecting tubing/ piping and cabling, laying and interconnection of all cables/ tubes/ pipes, fabrication and installation of manifolds/ impulse lines with supports, supply and installation of supports for impulse lines, hydraulic testing of impulse lines, painting of supports but exclusive of Supply of Analyzer and its accessories, all interconnecting Piping/ Tubing materials, all electrical/ Pneumatic connections, yoke/ rack and Calibration.
-
-
-
... More
Installation of Water Quality Analyzer
2
9654
19308
... More
ANALYZER CALIBRATION
-
-
-
... More
Providing necessary support to the analyser vendor/supplier round the clock during calibration, testing and commissioning of analysers listed below including removal of analyser as necessary from the preinstalled location and reinstallation back to its original location providing tools as required, Instrument air/ Nitrogen, any other utility, test report and loop testing as per vendor/ manufacturer recommendation and by engineers in charge except supply of analyser specific test equipment and consumables like calibration samples and gas cylinders.
-
-
-
... More
pH Analyzer
1
2952
2952
... More
Conductivity Analyzer
2
2952
5904
... More
Water Quality Analyzer (TOC)
2
2952
5904
... More
ANALYZER CABINETS
-
-
-
... More
Installation of prefabricated analyzer cabinets in analyzer room/ field of following sizes including supply, fabrication and installation of base frame grouting and fixing of foundation bolts as necessary, removal and reinstallation of analysers and its accessories like sampling system, racks, air conditioners, vortex cooler, installation of fresh air duct if necessary, connecting all utility lines to the cabinet as required but exclusive of supply of cabinet and analysers, painting of cabinet and calibration.
-
-
-
... More
Volume less than 1m (W) x 1m (D) x 2.5m (H).
4
10320
41280
... More
Volume less than 1.5m (W) x 1.5m (D) x 2.5m (H) but more than 1m (W) x 1m (D) x 2.5m (H).
1
16644
16644
... More
Volume less than 2m (W) x 2m (D) x 2.5m (H) but more than 1.5m (W) x 1.5m (D) x 2.5m (H).
1
18508
18508
... More
DETECTOR SYSTEMS
-
-
-
... More
Installation of Fire and Gas detectors/monitors, beacon lights and hooters including earthing of Fire and Gas detector, supply of supports but exclusive of Supply of Detectors, Yoke and Calibration.
-
-
-
... More
LEL Detectors
10
1165
11650
... More
Hooters
1
1132
1132
... More
H2S Detectors
1
1165
1165
... More
Beacon Lights
1
1132
1132
... More
MISCELLANEOUS ITEMS AND DEVICES
-
-
-
... More
Mounting of Miscellaneous instrument items as listed below on Yoke; fabrication and erection of Supports and including installation of instrument items, painting of supports but exclusive of Supply of Instrument items, Piping/ Tubing material / Calibration and supply and erection of Yoke support.
-
-
-
... More
Air filter Regulators/ Boosters/ Quick Exhaust Valve/ Air Lock Relays
3
999
2997
... More
Volume bottles and accessories like Volume boosters, quick exhaust relay etc. including tubing for Remote Operated Valves/ Control Valves of different sizes.
1
2996
2996
... More
Limit Switches.
1
999
999
... More
Electronic Local Indicator.
1
999
999
... More
Solenoid Valves 3 way/ 4 way/ 5 way with or without manual reset for loose supply only (excluding those mounted on valves).
1
999
999
... More
Position Transmitter.
1
999
999
... More
Corrosion Transmitters
1
1198
1198
... More
Vibration probes/Transmitter
1
1198
1198
... More
Flame-proof Push Button Station/ Selector Switches /Lamps.
1
999
999
... More
Current to Pneumatic/ Pneumatic to Current Convertor.
1
999
999
... More
Corrosion Coupons
1
1399
1399
... More
MOUNTING OF INSTRUMENT ITEMS ON PRE-FABRICATED HOOK-UP ASSEMBLY/SKID/ PACKAGES
-
-
-
... More
Installation of pressure gauges/pressure transmitters with or without vent/drain tubing on pre- installed manifold/Yoke/Support/ pre-fabricated hook-up assembly/ skid/ packages but exclusive of supply of instruments, installation of pre-fabricated hookup assembly/manifold/yoke and calibration of instruments.
7
1470
10290
... More
Installation of differential pressure gauges / differential pressure transmitters with or without vent / drain tubing on pre-installed manifold / Yoke / Support / pre-fabricated hook-up assembly/ skid/ packages but exclusive of supply of instruments, installation of pre-fabricated hookup assembly/manifold/yoke and calibration of instruments.
10
1470
14700
... More
LOCAL PANELS/ CABINETS/ GAUGE BOARDS
-
-
-
... More
Installation of local panels in field (Pressurized/ Non-pressurized/ Flame- proof) /PLC cabinets/ marshalling cabinets / Radiation Pyrometer monitor / Gas monitor panels/ local gauge board inside control room with or without instruments of following sizes including supply, fabrication, painting and installation of base frames and installation of panel but exclusive of pneumatic/ electrical connections, supplying of local panels/ local gauge boards.
-
-
-
... More
Size 1000x800x600 mm (or smaller volume)
1
7989
7989
... More
Size 2200x1000x800 mm 1000x800x600mm
1
9986
9986
... More
Size 2200x1200x800mm 2200x1000x800mm
1
13981
13981
... More
Installation of panels / cabinet / consoles
-
-
-
... More
Shifting of Cabinets from Site Storage Area/Warehouse to Control room/SRR as per instructions from Site In-Charge
-
-
-
... More
Size ≤ 2200x1200x800mm or ≥ 2200x800x600mm
1
8873
8873
... More
PANEL/ RACK ITEMS
-
-
-
... More
Mounting of miscellaneous instrument items on panels/ racks etc. as listed below including installation of items, fabrication and erection of supports pneumatic/ electrical connections but exclusive of supply of Instrument items, their setting/ Calibration.
-
-
-
... More
Alarm Annunciator with 24 windows
1
3196
3196
... More
IS Display Unit/ Standalone HMI
1
999
999
... More
Push Buttons, Selector Switches, Lamps, Bypass Switches
1
799
799
... More
CALIBRATION/ TESTING
-
-
-
... More
Cleaning, adjusting stroke/ positioner, stroke speed checking of Control and On-off (Shutdown) valves. Providing equipments, necessary test jig, Instrument Air, Nitrogen Cylinders, test reports, all consumable and loop testing. Excludes flow calibration
-
-
-
... More
Control Valves
7
1470
10290
... More
On-off valves (SDV/ ROV)
1
1194
1194
... More
Self Actuated Pressure reducing valves
1
1194
1194
... More
Cleaning, calibration of the instruments listed below including removal of instrument from reinstalled locations like panels, enclosures, racks, field etc., and fixing them back in respective places, providing equipments, necessary test jig, Instrument Air, Nitrogen Cylinders, test reports, all consumable, except for special imported test equipments for electronic instruments to be supplied by owner if available.
-
-
-
... More
Pressure gauges
32
582
18624
... More
Pressure transmitters
7
919
6433
... More
Diaphragm Seal Pressure Transmitters
1
919
919
... More
Differential Pressure Transmitters for Flow, Level and D.P.
5
1008
5040
... More
Differential Pressure Transmitters, Diaphragm Seal for Flow
1
1008
1008
... More
Differential Pressure Transmitters, Diaphragm Seal for Level
1
1008
1008
... More
Differential Pressure Transmitters, Diaphragm Seal for D.P.
1
1008
1008
... More
Temperature gauges
13
1008
13104
... More
Capillary type Temperature Gauges
1
1008
1008
... More
Temperature Transmitters
32
1008
32256
... More
Special Level Instruments/ Guided Wave / Ecclipse type Radar level instruments
7
1470
10290
... More
Tank Level Instrument (Radar type)
10
1470
14700
... More
Current to Pneumatic convertors
1
499
499
... More
Electronic Local Indicator
1
566
566
... More
Position Transmitter
1
566
566
... More
Speed Transmitter
1
533
533
... More
LEL Detectors
7
999
6993
... More
H2S Detectors
1
999
999
... More
Vibration Transmitters
7
999
6993
... More
Corrosion Transmitters
1
999
999
... More
Corrosion Coupons
1
999
999
... More
Cleaning, checking and functional tests for flowmeters. Providing equipments, necessary test jig, Instrument Air, test reports, all consumable, except for special imported test equipments for electronic instruments to be supplied by owner if available. Excludes flow calibration.
-
-
-
... More
Vortex flowmeters
3
2464
7392
... More
Ultrasonic flowmeters
3
2464
7392
... More
LOOP CHECKING
-
-
-
... More
Loop checking (excluding calibration/ testing) of the instruments listed below including verifying the functional performance of all elements comprising the loop, thereby ensuring proper interconnections and operation, with all other specifications inline with clause 4.13 of Standard specification for Erection tender 6-52-0060.
-
-
-
... More
Temperature Transmitters
32
369
11808
... More
Tank Level Instruments (Radar type)
10
369
3690
... More
Electronic Local Indicator
1
369
369
... More
Gas Detectors
7
369
2583
... More
Speed Indicator
1
369
369
... More
Pressure transmitters
7
369
2583
... More
Diaphragm Seal Pressure transmitters
1
369
369
... More
Position Transmitter
1
369
369
... More
Speed / Vibration Transmitter
1
369
369
... More
Push Button/Selector Switches/Lamps
1
369
369
... More
Annunciator Window
1
369
369
... More
Hooter / Beacon
1
369
369
... More
Control valve positioner
1
369
369
... More
Miscellaneous Instruments / Transmitters
3
369
1107
... More
Corrosion Transmitter
1
369
369
... More
Differential Pressure Transmitters for Flow, Level and D.P.
5
369
1845
... More
Differential Pressure Transmitters, Diaphragm Seal for Flow
1
369
369
... More
Special Level Instruments/ Guided Wave Radar level instruments
7
369
2583
... More
Differential Pressure Transmitters, Diaphragm Seal for Level
1
369
369
... More
Differential Pressure Transmitters, Diaphragm Seal for D.P.
1
369
369
... More
Loop checking (excluding calibration/ testing) of the flowmeters listed below including verifying the functional performance of all elements comprising the loop, thereby ensuring proper interconnections and operation, with all other specifications inline with clause 4.13 of Standard specification for Erection tender 6-52-0060.
-
-
-
... More
Vortex flowmeters
3
369
1107
... More
Ultrasonic flowmeters
3
369
1107
... More
SUPPLY ITEMS
-
-
-
... More
Supply of Instrument items as per specifications enclosed elsewhere in the Tender.
-
-
-
... More
S.S. Tubes -1/2"OD 316L, 153 Kg/CM2
670
307
205690
... More
1/2 " GI Conduit
67
132
8844
... More
3/4 " GI Conduit
67
152
10184
... More
1 " GI Conduit
335
172
57620
... More
Weatherproof & Flameproof Adapter for cable gland suitable for Gas Gr. IIA/IIB
-
-
-
... More
Weatherproof & Flameproof Adapter for cable gland suitable for Gas Gr. IIA/B : ISO M20 x 1/2" NPT(F)
15
200
3000
... More
Weatherproof & Flameproof Adapter for cable gland suitable for Gas Gr. IIC : ISO M16 x 1/2" NPT(F)
15
174
2610
... More
Weatherproof & Flameproof Adapter for cable gland suitable for Gas Gr. IIA/IIB : ISO M20 x 3/4" NPT(F)
15
227
3405
... More
Weatherproof & Flameproof Adapter for cable gland suitable for Gas Gr. IIA/IIB : 1/2"NPT(M) x 3/4" NPT(F)
15
333
4995
... More
Weatherproof & Flameproof Adapter for cable gland suitable for Gas Gr. IIA/IIB : 1.5" NPT(M) x 1" NPT(F)
15
910
13650
... More
Weatherproof & Flameproof Adapter for cable gland suitable for Gas Gr. IIA/IIB : 1.5" NPT(M) x 3/4" NPT(F)
15
751
11265
... More
Special armoured serial link MODBUS TCP/IP/RS485 Serial/ cable
-
-
-
... More
Special armoured serial link MODBUS TCP/IP/RS485 Serial/ cable
670
174
116580
... More
Fibre Optic cable (Armoured , Min 6 fibre , single mode fibres compliant to ITU-T G
652 , PVC shall be used as outer & inner sheaths)
34
85
2890
... More
Supply of Junction boxes of various types and specifications
-
-
-
... More
Junction Box, Weatherproof + Flameproof (Gas Groups -IIA/IIB) type 3 Way
1
13888
13888
... More
Junction Box, Weatherproof + Flameproof (Gas Groups -IIA/IIB) type for 12 Pair Cable
10
15646
156460
... More
Junction Box, Weatherproof + Flameproof (Gas Groups -IIA/IIB) type for 8 Triad Cable
1
13888
13888
... More
Junction Box, Weatherproof + Flameproof (Gas Groups -IIA/IIB) type for 6 Pair Cable
3
10462
31386
... More
Junction Box Weatherproof + Flameproof (Gas Groups -IIA/IIB) for 2 Core X 50/70 mm2
Power Cable including double compression type cable glands of Ni plated Brass material for incomer and outgoing cables.
1
11504
11504
... More
Junction Box Weatherproof + Flameproof (Gas Groups -IIA/IIB) for 2 Core X 10/16/35 mm2
Power Cable including double compression type cable glands of Ni plated Brass material for incomer and outgoing cables.
1
11105
11105
... More
Supply of Cable glands of various types and specifications
-
-
-
... More
Double compression type Cable gland, weatherproof + Flameproof (Gas Group IIA/IIB) type,Ni plated Brass material with PVC shroud, 1 1/4" NPTM
13
494
6422
... More
Double compression type Cable gland, weatherproof + Flameproof (Gas Group IIA/IIB) type,Ni plated Brass material with PVC shroud, 1 1/2" NPTM
335
768
257280
... More
Double compression type Cable gland, weatherproof + Flameproof (Gas Group IIA/IIB) type,Ni plated Brass material with PVC shroud, 1" NPTM
15
368
5520
... More
Double compression type Cable gland, weatherproof + Flameproof (Gas Group IIA/IIB) type,Ni plated Brass material with PVC shroud, 1/2" NPTM
335
210
70350
... More
Double compression type Cable gland, weatherproof + Flameproof (Gas Group IIA/IIB) type,Ni plated Brass material with PVC shroud, 3/4" NPTM
335
280
93800
... More
Double compression type Cable gland, weatherproof + Flameproof (Gas Group IIA/IIB) type, Ni plated Brass material with PVC shroud, 1 1/2" ET with check nut
15
563
8445
... More
Double compression type Cable gland, weatherproof + Flameproof (Gas Group IIA/IIB) type, Ni plated Brass material with PVC shroud, 1 1/4" ET with check nut
15
348
5220
... More
Double compression type Cable gland, weatherproof + Flameproof (Gas Group IIA/IIB) type, Ni plated Brass material with PVC shroud, 1" ET with check nut
15
210
3150
... More
Double compression type Cable gland, weatherproof + Flameproof (Gas Group IIA/IIB) type, Ni plated Brass material with PVC shroud, 3/4" ET with check nut
15
172
2580
... More
Double compression type Cable gland, weatherproof + Flameproof ( Gas Group IIA/IIB) type, Ni plated Brass material with PVC shroud, M20
15
174
2610
... More
Double compression type Cable gland, weatherproof + Flameproof ( Gas Group IIA/IIB) type, Ni plated Brass material with PVC shroud, M25
15
316
4740
... More
Supply of plugs for cable entries of various types and specifications
-
-
-
... More
Plug, weatherproof + flameproof (Gas Group IIA/IIB) type, Ni plated Brass material material, 1 1/2" NPTM
163
435
70905
... More
Plug, weatherproof + flameproof (Gas Group IIA/IIB) type, Ni plated Brass material material, 1" NPTM
13
275
3575
... More
Plug, weatherproof + flameproof (Gas Group IIA/IIB) type, Ni plated Brass material material, 3/4" NPTM
327
158
51666
... More
Plug, weatherproof + flameproof (Gas Group IIC) type, SS 304 material, 1 1/4" NPTM
13
384
4992
... More
Supply of compression tube fittings in Stainless Steel of various types and specifications
-
-
-
... More
Male Connector: Material: SS-316 : Size: 1/2" NPTM X 1/2" OD 153 Bar
327
440
143880
... More
Male Connector: Material: SS-316 : Size: 1/4" NPTM X 1/2" OD 153 Bar
163
348
56724
... More
Female Connector: Material: SS-316 : Size: 1/2" NPTM X 1/2" OD 153 Bar
163
351
57213
... More
Tube Union: Material: SS-316 ; Size: 1/2" OD x 1/2" OD 153 Bar
327
351
114777
... More
Tube Cap; Material: SS-316 ; Size : 1/2" OD 153 Bar
163
209
34067
... More
SS 316 Ball Valve 1/2" NB OD 41 Bar
327
1727
564729
... More
6 Way Air Manifold SS316
1
13000
13000
... More
12 Way Air Manifold SS316
1
20372
20372
... More
SS Tubing plug 1/2" OD SS316 , 153 Kg/CM2
163
520
84760
... More
Supply of compression tube fittings in Brass of various types and specifications
-
-
-
... More
Female Connector : Material: Brass : Size: 1/2" NPTF X 3/8" OD , 80 bar
7
269
1883
... More
Union Tee: Material: Brass ; Size: 3/8" OD x 3/8" OD x 3/8" OD , 80 bar
7
520
3640
... More
Tube Union ; Material: Brass ; Size: 3/8" OD x 3/8" OD , 80 bar
7
172
1204
... More
Supply of instrument tubes of different types and specifications
-
-
-
... More
Bare Copper tube 3/8" OD, 1 MM THK , 80 bar
327
436
142572
... More
JUNCTION BOX INSTALLATION
-
-
-
... More
Installation of weatherproof and flameproof junction boxes including supply, fabrication and installation of supports, installation of junction boxes, supply of 14 SWG GI wire (max. length 10 m per Junction Box), laying and connection, screwing plugs for unused entries and painting but exclusive of supply of junction boxes and glands/ fittings.
-
-
-
... More
For cable size 6P x 0.5/1.0/1.5/2.5 mm²/16 AWG Signal/FF/Alarm/ Control
7
3227
22589
... More
For cable size 8T x 1.5/ 2.5 mm² RTD/ Gas Detector
3
3994
11982
... More
For cable size 12P x 0.5/1.0/1.5/2.5 mm²/16 AWG Signal/FF/Alarm/ Control
13
3706
48178
... More
Installation of weatherproof and flameproof three way junction boxes including supply, fabrication and installation of supports, installation of junction boxes, supply of 14 SWG GI wire (max. length 10 M per Junction Box), laying and connection, screwing plugs for unused entries and painting but exclusive of supply of junction boxes and glands/ fittings.
-
-
-
... More
For cable joining, suitable for cable size 1P x 1.5 mm² Signal/ Alarm/ Control
1
1465
1465
... More
Installation of weatherproof and flameproof three way junction boxes for Power including supply, fabrication and installation of supports, installation of junction boxes, supply of 14 SWG GI wire (max. length 10 m per Junction Box), laying and connection, screwing plugs for unused entries and painting but exclusive of supply of junction boxes and glands/ fittings.
-
-
-
... More
For cable size 2C x 50 mm²
1
1465
1465
... More
For cable size 2C x 6 mm²
1
1465
1465
... More
For cable size 2C x 95 mm²
1
2464
2464
... More
For cable size 2C x 2.5 mm²
1
1465
1465
... More
For cable size 2C x 35 mm²
1
2464
2464
... More
For cable size 2C x 70 mm²
1
1465
1465
... More
For cable size 2C x 16 mm²
1
1997
1997
... More
For cable size 2C x 4 mm²
1
1465
1465
... More
LAYING OF CABLES
-
-
-
... More
Laying of instrumentation cables for signal, alarm, shutdown, control and signal cable on ducts, main trays, perforated trays, angle trays, trenches (including opening of cable duct covers if required through IRCs {Instrument Road Crossings}) including clamping, glanding the cables, termination at both ends including shield/ drain/ communication wire, providing and fixing identifying tags and megger testing but exclusive of supply of cables and erection of ducts, main tray, perforated tray/ angle trays and preparation of cable trench.
-
-
-
... More
Signal / Alarm / Control Cables of cable sizes 1P x 1.5 / 2.5 mm²
3268
18
58824
... More
Fieldbus Cable of Size 1 Pair x 16 /18 AWG
654
18
11772
... More
Special armoured serial link MODBUS TCP/IP/RS485 Serial/ cable
654
22
14388
... More
Fieldbus Cable of Size 2 Pair x 16 /18 AWG
1634
22
35948
... More
Signal/ Alarm/ Control Cables of cable sizes 12C / 6P x 1.5 / 2.5 mm²
654
26
17004
... More
Signal/ Alarm/ Control Cables of cable sizes 24C /12P x 1.5/ 2.5 mm²
6535
30
196050
... More
Laying of thermocouple/ RTD/ LEL Detector/ H2S Detector cables on ducts, main trays, perforated trays, angle trays, trenches (including through IRCs {Instrument Road Crossings}) including opening of cable duct covers if required clamping, glanding the cables, termination at both ends including shield/ drain/communication wire providing and fixing of identifying tags and megger testing but exclusive of supply of multi cables and erection of ducts, main tray, perforated tray/angle tray and preparation of cable trench.
-
-
-
... More
1 Pair / 2 Pair x 16/20 AWG Thermocouple Cable
654
17
11118
... More
1 Triad/ Quad x 1.5 mm² RTD/ LEL Cable
654
18
11772
... More
8 Triad/ Quad x 1.5 mm² RTD/ LEL Cable
4248
26
110448
... More
1 Triad/ Quad x 2.5 mm2 RTD/ LEL Cable
654
18
11772
... More
8 Triad/ Quad x 2.5 mm² RTD/ LEL Cable
654
18
11772
... More
2 Triad/ Quad x 1.5 mm² RTD/ LEL Cable
654
18
11772
... More
Laying of power cables on ducts, main trays, perforated trays, angle trays, trenches (including through IRCs) including opening of cable duct covers if required clamping, glanding the cables, termination at both ends including shield/ drain/ communication wire providing and fixing of identifying tags and megger testing but exclusive of supply of multi cables and erection of ducts, main tray, perforated tray/ angle tray and preparation of cable trench
-
-
-
... More
For cable size 2C x 4 mm²
1569
19
29811
... More
For cable size 2C x 50 mm²
1046
36
37656
... More
For cable size 2C x 70 mm²
262
44
11528
... More
For cable size 2C x 95 mm²
262
56
14672
... More
For cable size 2C x 6 mm²
262
22
5764
... More
For cable size 2C x 16 mm²
1569
26
40794
... More
For cable size 2C x 2.5 mm²
3921
18
70578
... More
For cable size 2C x 35 mm²
52
34
1768
... More
Laying of Fibre Optic cables with or without HDPE conduit
-
-
-
... More
Laying of Fibre Optic / system cables on ducts, main trays, perforated trays, angle trays, trenches ( including through Instrument Road Crossing) including opening of cable duct covers if required, clamping, glanding the cables, termination at both ends including shields , providing and fixing of identifying tags and testing but exclusive of supply of fibre Optic/System cables and erection of ducts, main trays, perforated trays,/angle trays and preparation of cable trench.
-
-
-
... More
Laying of FO/system cables of various sizes upto 30mm OD
39210
25
980250
... More
Laying of FO/system cables of various sizes upto 30mm OD along with HDPE conduits of 40 mm OD but exclusive of supply of HDPE conduits.
32
45
1440
... More
Termination / splicing of OFC within room at LIU through patch chords and connectors after looping in a Loop box including earthing, OFC site acceptance testing all complete as per specification.
7
5659
39613
... More
Termination / splicing of OFC at field through patch chords and connectors including earthing, OFC site acceptance testing all complete as per specification.
7
6991
48937
... More
SAND FILLING IN TRENCHES
-
-
-
... More
Supply of sand and filling of concrete cable trenches with sand after cable laying is completed including levelling of sand and fixing back of precast concrete slabs on the trench.
-
-
-
... More
Trench size 3100 mm (W) x 750 mm (D)
26
3334
86684
... More
Trench size 2700 mm (W) x 750 mm (D)
26
2899
75374
... More
Trench size 2400 mm (W) x 750 mm (D)
26
2579
67054
... More
Trench size 2400 mm (W) x 1500 mm (D)
105
5162
542010
... More
Trench size 2000 mm (W) x 750 mm (D)
26
2153
55978
... More
Trench size 1500 mm (W) x 750 mm (D)
78
1612
125736
... More
Trench size 1250 mm (W) x 750 mm (D)
52
1345
69940
... More
Trench size 750 mm (W) x 750 mm (D)
209
804
168036
... More
EARTHING
-
-
-
... More
Supply, laying and termination of both ends of earthing cables from earth grid pit to the DCS/ Local panels/ Barrier earth bus bars in trays/ conduits/ trenches as required.
-
-
-
... More
For earthing cable upto 50 mm² size with PVC insulation.
262
351
91962
... More
PIPING / TUBING / FABRICATION WORK
-
-
-
... More
Fabrication and erection of SS Air lines and fittings including supply/ fabrication/ erection of supports, installation of distribution, pneumatic testing and painting of supports but exclusive of supply of pipe and fittings as per standard
-
-
-
... More
For size 1"
130
387
50310
... More
Laying of Bare/ PVC covered copper tubes/ SS tubes on perforated trays including clamping, termination at both ends, providing identifying tags at both ends and Air testing, but exclusive of supply of copper/SS tubes, fitting and erection of perforated tray/ angle tray
-
-
-
... More
1/2" / 12 mm O.D . (for SS tubes)
52
167
8684
... More
Up to 3/4" O.D. (for analyzers in SS tubes)
26
233
6058
... More
Laying of copper tube for steam tracing of Instruments, primary impulse lines with steam traps/valve accessories including clamping, supply of clamps termination at both ends, providing and fixing metallic tags and hydraulic testing as per Standard given below but exclusive of supply of tube/ fitting and insulation as per standards
-
-
-
... More
For sizes 3/8"/ 10 mm
65
129
8385
... More
Tubing Hook-up of Control valves/ Pneumatic Transmitters etc. with air filter regulator / positioner / solenoid valves / Current to Pneumatic converters etc. as per Standards
-
-
-
... More
7-52-1906 (Tubing hook - up control valve with smart / FF positioner - 1/2 inch OD)
1
1298
1298
... More
7-52-1908 (Tubing hook - up control valve with smart / FF positioner - 1/2 inch OD)
1
1298
1298
... More
Supply & wrapping with sodium silicate inhibited ceramic fiber rope (SS-wire braided) after cleaning the impulse lines of dust, rust, grease. The wrapping of the rope around impulse line shall cover it completely without leaving any gap. Apply two layers of self-adhesive Aluminum foil tape of minimum 0.1 mm thick spirally bound over the fiber rope surface with the joints in two layers staggered with all other specifications inline with specification '6-44-0002' for Hot insulation
-
-
-
... More
1/2" impulse line (with 3/8" tracer)
163
484
78892
... More
3/4" impulse line (with 3/8" tracer)
163
671
109373
... More
3" impulse line (with 3/8" tracer)
32
2803
89696
... More
Erection of SS Air distribution manifold and fittings including supply/ fabrication/ erection of supports, pneumatic testing and painting of supports but exclusive of supply of SS Air distribution manifold and fittings
-
-
-
... More
Installation of 12-way Air Manifold (1/2") as per Standard 7-52-1904
1
3991
3991
... More
Installation of 6-way Air Manifold (1/2") as per Standard 7-52-1905
1
2375
2375
... More
DRILLING AND THREADING OF BLIND FLANGES
-
-
-
... More
Making of 1/2" screwed connections on 1-1/2" blind flanges of specified materials/ ratings, by drilling holes and tapping
-
-
-
... More
In Carbon Steel , 150# flange
1
333
333
... More
In Carbon Steel , 300# flange
1
399
399
... More
In Stainless Steel , 150# flange
1
499
499
... More
Making of 1/2" screwed connections on 2" blind flanges of specified materials/ ratings, by drilling holes and tapping
-
-
-
... More
In Carbon Steel , 150# flange
1
366
366
... More
In Carbon Steel , 300# flange
1
433
433
... More
In Stainless Steel , 150# flange
1
632
632
... More
Making of 3/4" screwed connections on 2" blind flanges of specified materials/ ratings, by drilling holes and tapping
-
-
-
... More
In Carbon Steel , 300# flange
1
433
433
... More
In Staineless Steel , 300# flange
1
699
699
... More
Making of 1/2" screwed connections on 3" blind flanges of specified materials/ ratings, by drilling holes and tapping
-
-
-
... More
In Carbon Steel , 150# flange
1
399
399
... More
In Carbon Steel , 300# flange
1
433
433
... More
In Stainless Steel , 150# flange
1
632
632
... More
FABRICATION WORKS
-
-
-
... More
Fabrication of Siphons / Condensate pots as per drawing attached with following material including supply of pipes etc.
-
-
-
... More
Syphon - Carbon steel
1
2331
2331
... More
Syphon - Stainless steel
1
3329
3329
... More
PWHT/ STRESS RELIEF - CARBON STEEL
-
-
-
... More
Post-weld Heat Treatment (PWHT)/ Stress Relieving of all weld joints in impulse piping of Pressure Gauges installations.
-
-
-
... More
Installation standard 7-52-0432/ 0433/1112/1113
1
433
433
... More
Post-weld Heat Treatment (PWHT)/ Stress Relieving of all weld joints in impulse piping of Pressure Instruments installations.
-
-
-
... More
Installation Standard 7-52-2104
1
433
433
... More
Post-weld Heat Treatment (PWHT)/ Stress Relieving of all weld joints in impulse piping of Differential Pressure (Flow) Instruments
-
-
-
... More
Installation standard 7-52-1305
1
433
433
... More
Post-weld Heat Treatment (PWHT)/ Stress Relieving of all weld joints in impulse piping of Differential Pressure (Level) Instruments
-
-
-
... More
Installation standard 7-52-1566
1
3329
3329
... More
Post-weld Heat Treatment (PWHT)/ Stress Relieving of all weld joints in impulse piping of Magnetic Level Gauges
-
-
-
... More
Installation Standard 7-52-3501
1
1598
1598
... More
RADIOGRAPHY - CARBON STEEL WELD JOINTS
-
-
-
... More
Radiography conforming to the requirements of the Piping Class for all weld joints in impulse piping of Pressure Gauges
-
-
-
... More
Installation standard 7-52-0432/ 0433/1112/1113
1
499
499
... More
Radiography conforming to the requirements of the Piping Class for all weld joints in impulse piping of Pressure Instruments installations
-
-
-
... More
Installation standard 7-52-2104
1
566
566
... More
Radiography conforming to the requirements of the Piping Class for all weld joints in impulse piping of Differential Pressure (Flow) Instruments
-
-
-
... More
Installation standard 7-52-1305
1
499
499
... More
Radiography conforming to the requirements of the Piping Class for all weld joints in impulse piping of Differential Pressure (Level) Instruments
-
-
-
... More
Installation standard 7-52-1566
1
3662
3662
... More
Radiography conforming to the requirements of the Piping Class for all weld joints in impulse piping of Magnetic Level Gauges
-
-
-
... More
Installation Standard 7-52-3501
1
2130
2130
... More
Hardness Test
-
-
-
... More
Hardness test of all weld joints to have maximum hardness of 200 BHN after completing impulse piping of pressure gauge installations.
-
-
-
... More
Installation Standard 7-52-0432/0433/1112/1113
2
467
934
... More
Hardness Test of all the weld joints to have maximum hardness of 200BHN after completing impulse piping of Pressure Instruments installation
-
-
-
... More
Installation standard 7-52-2104
1
467
467
... More
Hardness Test of all the weld joints to have maximum hardness of 200BHN after completing impulse piping of Differential Pressure Instruments installation
-
-
-
... More
Installation standard 7-52-1566
1
3329
3329
... More
Hardness test of all weld joints to have maximum hardness of 200 BHN after completing impulse piping of guided wave radar level instrument Installation,
-
-
-
... More
Installation standard 7-52-3506
1
2130
2130
... More
Hardness test of all weld joints to have maximum hardness of 200 BHN after completing impulse piping of Level gauges Installation,
-
-
-
... More
Installation standard 7-52-3501
1
1665
1665
... More
Fire protection of instrument cable duct/trays
-
-
-
... More
Supply and erection of fire protection material for instrument cable ducts as per specification enclosed elsewhere with tender
-
-
-
... More
Run of Duct 1000mm(W) X 400mm(H)
1090
4325
4714250
... More
Run of Duct 400mm(W) X 200mm(H)
1090
2164
2358760
... More
Run of Duct 1200mm(W) X 400mm(H)
286
4621
1321606
... More
Run of Duct 800mm(W) X 300mm(H)
496
4028
1997888
... More
Run of Duct 600mm(W) X 300mm(H)
380
2780
1056400
... More
Supply and erection of fire protection of cable trays as per specification enclosed elsewhere with tender
-
-
-
... More
Run of Tray 300mm (W) X 30mm (H)
268
1523
408164
... More
Run of Tray Angle tray of size 50 mm X 50mm X 6mm
134
981
131454
... More
STRUCTURAL
-
-
-
... More
Supply, fabrication and erection of FRP duct, and its supports as per Standard 7-52-0253. Duct configurations include Duct Equal Tee, Duct Expander Tee, Duct Reducer Tee, Duct Offset Bend, Duct Width Reducer, Vertical Plane Tee, Vertical Plane Elbow, Duct Bridge (Jump-Over), sleeves
-
-
-
... More
Run of Duct 400mm (W) x 200mm (H)
27
5014
135378
... More
Run of Duct 1200mm (W) x 400mm (H)
27
11937
322299
... More
Run of Duct 600mm (W) x 300mm (H)
27
6251
168777
... More
Run of Duct 800mm (W) x 300mm (H)
27
8122
219294
... More
Run of Duct 1000mm (W) x 400mm (H)
27
9414
254178
... More
Supply, Fabrication and erection of Galvanised Iron duct and its supports as per standard. Duct configurations include Duct Equal Tee, Duct Expander Tee, Duct Reducer Tee, Duct Offset Bend, Duct with Reducer, Vertical Plane Tee, Vertical Plane Elbow, Duct Bridge (jumpover), Sleeves.
-
-
-
... More
Run of Duct 1200mm (W) X 400mm (H)
308
13189
4062212
... More
Run of Duct 400mm (W) X 200mm (H)
1271
3629
4612459
... More
Run of Duct 1000mm (W) X 400mm (H)
1275
11590
14777250
... More
Run of Duct 600mm (W) X 300mm (H)
458
8894
4073452
... More
Run of Duct 800mm (W) X 300mm (H)
598
10126
6055348
... More
Supply, fabrication and installation of of Galvanized Iron ladder tray and its supports as per drawing including bends, tees and elbows, fabricated from 75 mm x 75 mm x 6 mm Galvanized Iron Angle with 50 mm (W) x 6 mm thick Galvanized Iron flat including supply and installation of supports and painting of supports as per specifications.
-
-
-
... More
Run of ladder tray 600mm width
64
2055
131520
... More
Supply, fabrication and erection of angle/ channel trays fabricated out of MS and its supports as per drawing with surface prepared for painting and with one coat of primer as per IS:2074 and two coats of finished paint including supply of paint.
-
-
-
... More
Tray of 50 x 50 x 6 mm angle
162
532
86184
... More
Supply and erection of prefabricated Anodised Aluminium perforated trays and its supports including tees, bends and elbows , painting of supports including supply of supports,paint as per painting specifications
-
-
-
... More
Tray of 60mm (W) X 20mm (H) with cover
321
568
182328
... More
Tray of 150mm (W) X 30mm (H) with cover
168
1106
185808
... More
Tray of 300mm (W) X 30mm (H) with cover
335
1636
548060
... More
GENERAL SITE WORK
-
-
-
... More
Supply of Prefabricated FRP canopies along with mounting accessories for local instruments, Transmitters, Junction Box, local panel /cabinet etc. for mounting on the stanchion and alignment.
-
-
-
... More
Canopy for local instruments,transmitters
34
2473
84082
... More
Canopies for temperature elements
34
2473
84082
... More
Canopies for push buttons
1
2473
2473
... More
Canopy for Junction Boxes
14
3094
43316
... More
Erection of Prefabricated FRP canopies for local instruments, Transmitters, Junction Box, local panel /cabinet etc. on the stanchion and alignment.
-
-
-
... More
Canopies for local instruments, transmitters
34
366
12444
... More
Canopies for local temperature elements
34
366
12444
... More
Canopies for push buttons
1
366
366
... More
Canopy for Junction Boxes
14
366
5124
... More
DIFFERENTIAL PRESSURE (FLOW) TRANSMITTERS (Excl. supply of Impulse pipe / Tubing material)
-
-
-
... More
Installation of Differential pressure(with or without integral manifold)/ Diaphragm Seal Type Differential Pressure flow instruments including Mounting on Yoke, supply of supports for impulse lines/ manifolds/ capillary, fabrication and Installation of manifolds/ impulse lines with supports as per Standard indicated below, laying of capillary on supports, hydraulic testing and painting of supports but exclusive of Supply of Instruments, Piping material, all Electrical/ Pneumatic connections, Yoke and Calibration.
-
-
-
... More
In Carbon Steel as per Standard 7-52-1305
7
1603
11221
... More
In Carbon Steel as per Standard B269-7-52-3306
1
27961
27961
... More
GENERAL SITE WORK
-
-
-
... More
Supply of Yoke supports for transmitters/ preamplifiers (wherever applicable) including supply, fabrication and erection of instrument yoke of all types and painting of yoke supports but exclusive of mounting of Instrument on supports.
-
-
-
... More
2" Yoke supports as per standard 7-52-0101
62
999
61938
... More
Supply, fabrication and installation of structural supports with MS channel/angle/plates etc. for supports of miscellaneous instruments/ cabinets/ panels including cutting, welding , bolting, rivetting, grouting including supply and installation of installation hardware like anchor bolts/nuts etc., painting of supports including supply of paints as per specification, including all labours and materials and completion of jobs in all aspects as per drawings/ directions of Engineer-in-Charge nor paid).
-
-
-
... More
Structural steel ISMC 100
1
76827
76827
... More
Identification of instrument items wherever required including supply of approved colour of paint/ paints (Fluorescent), painting of tag number (approx 25-50 mm high) on instrument item like transmitter, switches, level gauges, control valves etc. as specified by Engineer-in-Charge.
-
-
-
... More
Identification of instrument items
62
289
17918
... More
Removal and remounting of accessories of control valves including removal of positioners, solenoid valves, tubing, limit switches and other accessories at store, tagging the components/ accessories/ bunching/ tying and handing over to owner's store for safe custody, refixing/ remounting of all accessories like positioners, solenoid valves tubing, limit switches etc. in field on control valves.
-
-
-
... More
Removal and remounting of accessories
34
1665
56610
... More
CHIEF CONTROLLER OF EXPLOSIVE( CCE) CERTIFICATES FOR FIELD ELECTRICAL/ ELECTRONIC INSTRUMENTS & ACCESSORIES AND EQUIPMENTS
-
-
-
... More
Obtaining certificate of approval from Chief Controller Of Explosives( CCE) for field electrical/electronic instruments & accessories and equipments based on type test certificate made available from the instrument vendors including submission of application to statutory authorities , necessary fees, all test certificates, equipment drawings in required volumes, interaction with the authorities, follow-up for approval, obtaining necessary approval certificate before energization of field electrical/electronic instruments & accessories and equipments.
1
48276
48276
... More
Deployment of Instrument Technicians along with required test equipments, tools & tackles for Calibration /Re-Calibration of field instruments, Functional Checks of Instruments, any other requirement as & when required as per the instructions of Engineer-in-charge. One manday is 8
Hrs duty.
-
-
-
... More
Deployment of Instrument Technicians
7
1203
8421
... More
Deployment of Electrician with all the required tools and tackles as per the instructions of
Engineer-in-charge.One Man Day is 8 Hrs Duty.
-
-
-
... More
Deployment of Electrician
7
1203
8421
... More
Deployment of Helpers (Semi skilled) with required tools & tackles as per the instruction of
Engineer-in-Charge.One Man Day is 8 Hrs Duty.
-
-
-
... More
Deployment of Helper
7
910
6370
... More
Supply of Manpower :
Agency to provide & mobilise following manpower as per instructions of Engineer in-charge for delivering exclusive service to B AND R . However, 2 weeks' notice shall be given for mobilisation and 1 day notice shall be given for demobilisation. Note : The quoted rate of manpower deployment shall be inclusive of cost towards required PPEs, facilities ecessary for functioning at site and complience of applicable Statutory obligation e.g P.F. & ESI etc. (1 Man-Month should be considered as 30 man-days). Necessary qualification for the person to be deployes is furnished elsewher in the Contract.
-
-
-
... More
DISCIPLINE ENGINEER :
-
-
-
... More
INSTRUMENTATION
10
44383
443830
... More
SUPERVISOR
-
-
-
... More
INSTRUMENTATION
10
29293
292930
... More
SAFETY
10
29293
292930
... More
"NOTE:-
THE ABOVE RATE SHALL BE INCLUSIVE OF ALL TAXES & DUTIES, ROYALTIES, CESS, FEE, ENVIORMENTAL & POLLUTION, FITNESS & SAFETY CLEARANCE CHARGES (IF ANY), OR ANY OTHER INCIDENTAL CHARGES ETC BUT EXCLUDING GST."
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%