Bridge And Roof Company India Limited Tender
If you want to inquire about any e-tender the Haryana government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Haryana tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Haryana etender you're looking for. Read further to learn how to search and bid for etender Haryana.
Costs
EMD
₹ 7,70,000Document Cost
₹ 11,800Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_BandR_813726_1Bid Award Id
ViewTender No
BANDR/HO/71148 / ELECTRICAL/NIT/SC/02Tender Authority
Bridge And Roof Company India Limited ViewPurchaser Address
-Website
http://eprocure.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
eNIT-Electrical-PKG-2-Panipat
BOQ Items
3/16" BSW.
300
17700
59
5/16" BSW.
300
20400
68
1/4" BSW.
300
19800
66
3/8" BSW.
1200
103200
86
5/8" BSW.
3600
363600
101
1/2" BSW.
2400
276000
115
SAFETY EQUIPMENT
-
-
-
Supply and installation of the following, including the supply of necessary clamps, bolts, rawl plugs etc., breaking and making good of walls, if required, mounting, including all labour and materials, complete and as per applicable standards and CEA Guidelines and as per directions of Engineer-in-Charge.
-
-
-
Shock hazard charts complete with frame and glass.
8
7712
964
First Aid Boxes.
1
1526
1526
Sand buckets with stand (Each with at least 3 sand buckets).
4
10692
2673
Shock hazard charts - Laminated type
8
7584
948
Gas Mask for use in substation during fire & smoke as per CEA guidelines
1
7574
7574
Wall mounted Illuminated type Electrical Single Line Diagrams-A0 size" for the unit including frame, power supply hardware, LED fittings, sockets, glass, etc.
1
12746
12746
True RMS Digital Multimeter with Display of up to 3 digits of decimal.
1
19546
19546
Clamp on earth meggar
1
15147
15147
Face Shield
1
11705
11705
Electrical Protection suit
1
49572
49572
HV tester & HV Tapes
1
26852
26852
Supply and laying of 900 mm wide safety insulation mats complying to IS-15652, of following grades required for maintenance of electrical equipment in substation, including cutting to required shape in running length, including all labour and materials, as per applicable Indian or International standards and CEA Guidelines and as per directions of Engineer-in-Charge.
-
-
-
3.3 kV grade.
400
431200
1078
11 kV grade.
140
183680
1312
Supply of following items as per applicable Indian standards/CEA Guidelines.
-
-
-
Rubber hand gloves (11 kV grade).
1
718
718
Enamelled caution boards.
1
310
310
Discharge rod with earthing facility (upto 11 kV grade).
1
1806
1806
Discharge rod with earthing facility (Above11 kV & 33kV).
1
2163
2163
HV fuse puller handle.
1
608
608
Supply and application/installation of epoxy based insulation coating with breakdown voltage as per IS, suitable for system voltage as marked and shall be suitable for installation on concrete flooring of substation in airconditioned/non-airconditioned area, having smooth finish, including all labour and materials, complete as per approved drawings, job & standard specification attached with this tender and directions of the engineer-in- charge
-
-
-
For highest systen voltage of 7.2kV
1200
1617600
1348
SUPPLY OF SPARES / LAMPS
-
-
-
MV HRC Fuses
-
-
-
16 A.
4
324
81
32 A.
4
460
115
63 A.
4
664
166
100 A.
4
1156
289
160 A.
4
1648
412
250 A.
4
1996
499
315 A.
4
2160
540
400 A.
4
2532
633
LAMPS
-
-
-
LED Lamp (4000-4500 LUMENS, 100 LM/Watt) for well glass Ltg. fixtures
4
1684
421
LED Lamp (6500-7000 LUMENS, 100 LM/Watt) for well glass Ltg. fixtures.
4
2024
506
LED Lamp (6500-7000 LUMENS, 100 LM/Watt) for flood Ltg. fixtures
4
2704
676
LED Lamp (6500-7000 LUMENS, 100 LM/Watt) for flood Ltg. fixtures
4
3384
846
Laying of cables(using cable pulling by motorized winch with torque limits) of different voltage grade and types of the following overall diameters in ready trays/trenches/ supported on structure/pull through pipes including supply and fixing of stainless steel strip number tags, supply and applying of fireproofing paint to meet OISD requirement (for 1m length near terminations), supply and fixing of GI saddles & saddle bars etc., including transportation from store/yard to site at the place of installation, unpacking, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge
-
-
-
Cables with OD above 20 mm but upto 30 mm.
50000
750000
15
G.I. & PVC PIPES
-
-
-
Supply and laying of following sizes of G.I. Pipes (medium) in required length fixed on steel, concrete or similar structure, laid in trenches, ready to be buried in concrete including cutting, threading, bending and similar works, supply of clamps, small iron structures, spacers and installation of seats, plugs, bushings etc., small civil works, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
50 mm NB.
60
26340
439
100 mm NB.
60
59940
999
80 mm NB.
25
19200
768
160 mm NB.
25
36525
1461
Supply and laying of following sizes of PVC Pipes in required length fixed on steel, concrete or similar structure, laid in trenches, ready to be buried in concrete including cutting, threading, supply of bends and similar works, supply of clamps, small iron structures, spacers and installation of seats, plugs, bushings etc., small civil works, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
50 mm NB.
5
870
174
100 mm NB.
5
3210
642
80 mm NB.
5
1510
302
160 mm NB.
5
4115
823
Supply and installation of push button station supports complete with base plate, foundations bolts, grouting and painting as per Specification for surface preparation and protective coating, B269-000 -02-42-PCS-0001 suitable for highly corrosive environment etc., including all labour and materials, as per approved drawings and directions of Engineer-in-Charge.
-
-
-
As per std. 7-51-0306
30
46830
1561
As per std. 7-51-0307
3
4683
1561
As per std. 7-51-0308
3
5541
1847
As per std. 7-51-0317
3
5955
1985
CABLE - TRAYS
-
-
-
Supply and installation of prefabricated hot dip galvanised steel cable trays, fabricated out of hot rolled sheet steel with rigid welded construction ladder type with a rung as per std. 7-51-0333, of approved make and cable tray fittings, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
750 mm wide Straight run cable tray.
25000
23475000
939
Supply, fabrication and installation of 0.91 mm (20 gauge) GI sheet covers for cable trays, including necessary hardwares, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
2400
1452000
605
CABLE GLANDS
-
-
-
Supply of nickel-plated, flame proof IIA/IIB double compression type brass cable glands, suitable for out door terminations of armoured PVC cables of following overall diameter (excluding termination and connection of cables), including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
Cables with OD upto 20 mm.
5
990
198
Cables with OD above 20 mm but upto 30 mm.
5
1715
343
Cables with OD above 30 mm but upto 40 mm.
5
3135
627
Cables with OD above 40 mm but upto 50 mm.
5
4120
824
Cables with OD above 50 mm but upto 60 mm.
5
6160
1232
Cables with OD above 60 mm but upto 80 mm.
5
7710
1542
Cables with OD above 80 mm but upto 100 mm.
5
9915
1983
Supply of nickel-plated, flame proof IIC double compression type brass cable glands, suitable for out door terminations of armoured PVC cables of following overall diameter (excluding termination and connection of cables), including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
Cables with OD upto 20 mm.
5
1335
267
Cables with OD above 20 mm but upto 30 mm.
5
1805
361
Cables with OD above 30 mm but upto 40 mm.
5
3475
695
Cables with OD above 40 mm but upto 50 mm.
5
4750
950
Cables with OD above 50 mm but upto 60 mm.
5
7220
1444
Cables with OD above 60 mm but upto 80 mm.
5
9225
1845
Cables with OD above 80 mm but upto 100 mm.
5
11155
2231
Supply of nickel plated brass double compression cable glands suitable for outdoor installations (WP) of following overall diameter (excluding termination and connections of cables), including drilling of suitable holes in equipments for fixing purposes etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
Cables with OD upto 20 mm.
5
880
176
Cables with OD above 20 mm but upto 30 mm.
5
1295
259
Cables with OD above 30 mm but upto 40 mm.
5
2850
570
Cables with OD above 40 mm but upto 50 mm.
5
4085
817
Cables with OD above 50 mm but upto 60 mm.
5
5810
1162
Cables with OD above 60 mm but upto 80 mm.
5
8875
1775
Cables with OD above 80 mm but upto 100 mm.
5
12645
2529
Supply of nickel plated brass single compression cable glands of following overall diameter (excluding termination and connections of cables), including drilling of suitable holes in equipments for fixing purposes etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
Cables with OD upto 20 mm.
3
321
107
Cables with OD above 20 mm but upto 30 mm.
3
570
190
Cables with OD above 30 mm but upto 40 mm.
3
1083
361
Cables with OD above 40 mm but upto 50 mm.
3
1185
395
Cables with OD above 50 mm but upto 60 mm.
3
1611
537
Cables with OD above 60 mm but upto 80 mm.
3
1884
628
Cables with OD above 80 mm but upto 100 mm.
3
2211
737
Supply and fixing of FLP(IIA/IIB) blocking plugs for blocking unused cable entries with following diameter in outdoor electrical equipment including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
Cables with OD up to 20 mm
3
726
242
Cables with OD above 20 mm but upto 30 mm
3
1032
344
Cables with OD above 30 mm but upto 40 mm
3
1365
455
Cables with OD above 40 mm but upto 50 mm
3
1833
611
Cables with OD above 50 mm but upto 60 mm
3
2211
737
Cables with OD above 60 mm but upto 80 mm
3
2562
854
Cables with OD above 80 mm but upto 100 mm
3
3264
1088
Supply and fixing of FLP(IIC) blocking plugs for blocking unused cable entries with following diameter in outdoor electrical equipment including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
Cables with OD up to 20 mm
3
765
255
Cables with OD above 20 mm but upto 30 mm
3
1083
361
Cables with OD above 30 mm but upto 40 mm
3
1389
463
Cables with OD above 40 mm but upto 50.0 mm
3
2004
668
Cables with OD above 50 mm but upto 60 mm
3
2376
792
Cables with OD above 60 mm but upto 80 mm
3
2727
909
Cables with OD above 80 mm but upto 100 mm
3
3507
1169
MARKERS
-
-
-
Supply and installation of cable markers as per std. 7-51-0301, for underground cable runs with
14 SWG enamelled steel plate with white lettering on jade green background inclusive of providing and fixing supports, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
3
3429
1143
Supply and installation of earth pit markers for directly buried GI pipe electrodes with 14 SWG enamelled steel plate engraved with white letters BURIED, EARTH ELECTRODE on JADE green background complete with support and foundation as per approved drawings, specifications of this tender and direction of Engineer-in-Charge.
3
3429
1143
CABLE LUGS
-
-
-
Supply of crimping type long barrel tinned copper lugs with circular/sector shaped barrel for following conductor sizes, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
All sizes upto 10 sq. mm
5
60
12
All sizes from 16 to 35 sq. mm
5
95
19
All sizes from 50 to 185 sq. mm
5
805
161
All sizes from 240 to 400 sq. mm
5
2450
490
Supply of crimping type long barrel aluminium lugs with circular/sector shaped barrel for following conductor sizes, as per approved drawings, specifications of this tender and directions of
Engineer-in-Charge.
-
-
-
All sizes upto 10 sq. mm
5
30
6
All sizes from 16 to 35 sq. mm
5
60
12
All sizes from 50 to 185 sq. mm
5
265
53
All sizes from 240 to 400 sq. mm
5
1055
211
Supply of crimping type long barrel Bimetallic lugs with Al barrel & tinned Cu palm with circular/sector shaped barrel for following conductor sizes, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
All sizes upto 10 sq. mm
5
70
14
All sizes from 16 to 35 sq. mm
5
110
22
All sizes from 50 to 185 sq. mm
5
890
178
All sizes from 240 to 400 sq. mm
5
1835
367
Supply of crimping type long barrel Bimetallic lugs with tinned Cu barrel & Al palm with circular/sector shaped barrel for following conductor sizes, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
All sizes upto 10 sq. mm
5
110
22
All sizes from 16 to 35 sq. mm
5
195
39
All sizes from 50 to 185 sq. mm
5
455
91
All sizes from 240 to 400 sq. mm
5
630
126
ADAPTORS / REDUCERS / NIPPLES ETC.
-
-
-
Supply and fixing nickel-plated brass adaptors/ reducers for cable glands of following sizes including all labour and materials complete as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. Adaptors shall have male part threaded as per Eqpt. threads and the other end to receive glands having E.T. thread.
-
-
-
Eqpt. Thread 3/4" PF (J.I.S.)-E.T. Thread 3/4"ET
5
1790
358
Eqpt. Thread 1" PF (J.I.S.) - E.T. Thread 3/4"ET
5
1860
372
Eqpt. Thread 1" PF (J.I.S.) -E.T. Thread 1"ET
5
2480
496
Eqpt. Thread 1-1/2" PF (J.I.S.)- E.T. Thread 1-1/4"ET
5
2685
537
Eqpt. Thread 1-1/2" PF (J.I.S.)- E.T. Thread 1-1/2"ET
5
3065
613
Eqpt. Thread 2" PF (J.I.S.) -E.T. Thread 1-1/2"ET
5
4780
956
Supply and fixing FLP(IIA/IIB), weatherproof, nickel-plated brass adaptors/reducers for cable glands of following sizes including all labour and materials complete as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. Adaptors shall have male part threaded as per Eqpt. threads and the other end to receive glands having E.T. thread.
-
-
-
Eqpt. Thread 3/4" PF (J.I.S.)-E.T. Thread 3/4"ET
5
2150
430
Eqpt. Thread 1" PF (J.I.S.) -E.T. Thread 3/4"ET
5
2230
446
Eqpt. Thread 1" PF (J.I.S.) -E.T. Thread 1"ET
5
2975
595
Eqpt. Thread 1-1/2" PF (J.I.S.)- E.T. Thread 1-1/4"ET
5
3220
644
Eqpt. Thread 1-1/2" PF (J.I.S.)- E.T. Thread 1-1/2"ET
5
3675
735
Eqpt. Thread 2" PF (J.I.S.) -E.T. Thread 1-1/2"ET
5
5545
1109
Supply and fixing FLP(IIC), weatherproof, nickel-plated brass adaptors/reducers for cable glands of following sizes including all labour and materials complete as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. Adaptors shall have male part threaded as per Eqpt. threads and the other end to receive glands having E.T. thread.
-
-
-
Eqpt. Thread 3/4" PF (J.I.S.)-E.T. Thread 3/4"ET
3
1848
616
Eqpt. Thread 1" PF (J.I.S.) -E.T. Thread 3/4"ET
3
1896
632
Eqpt. Thread 1" PF (J.I.S.) -E.T. Thread 1"ET
3
2343
781
Eqpt. Thread 1-1/2" PF (J.I.S.)- E.T. Thread 1-1/4"ET
3
2490
830
Eqpt. Thread 1-1/2" PF (J.I.S.)- E.T. Thread 1-1/2"ET
3
2763
921
Eqpt. Thread 2" PF (J.I.S.) -E.T. Thread 1-1/2"ET
3
4128
1376
LIGHTING POLES
-
-
-
Supply and installation of platform Lighting pole as per std. 7-51-0202, including all welding, structural works, paint and all sundry materials as required, including painting, (excluding supply and installation of control gear box/junction box), but including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
Lighting poles including supply and connection of wires upto fixtures for safe areas.
5
17270
3454
Lighting poles for hazardous areas.
10
51290
5129
Supply and installation of street lighting poles (single bracket/double bracket) including built in marshalling box and necessary wire/cable running from marshalling box to the lighting fixture, cable termination and connection, fixing of cable glands and lugs, including all civil works, excavation, foundation, disposal of surplus earth, providing shoring, strutting and dewatering if required and including supply of cement, steel, GI pipes, base plates, paint and all sundry materials as required, including painting, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
Poles as per std. 7-51-0233 FLP MB for Gas IIA/IIB, Temp Class T3 for hazardous area
5
65005
13001
Poles as per std. 7-51-0234 sht. 1 of 2 (Single bracket)
5
82160
16432
Poles as per std. 7-51-0234 sht. 1 of 2 (Double bracket)
5
89390
17878
Poles as per std. 7-51-0234 sht. 2 of 2 (Single bracket)
120
2492400
20770
Poles as per std. 7-51-0234 sht. 2 of 2 (Double bracket)
5
114865
22973
Poles as per std. 7-51-0235 sht. 1 of 2
3
77802
25934
Poles as per std. 7-51-0235 sht. 2 of 2
3
82965
27655
Supply and installation of G.I. light pole for aviation lights including all civil works, structural steel works, foundation, providing shoring, strutting and de-watering as required and including supply of cement, steel, GI pipes, base plates, adaptors, reducers, paint and all sundry materials as required, including painting, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge
-
-
-
Poles as per std. 7-51-0220 Detail-1
3
14664
4888
Poles as per std. 7-51-0220 Detail-2
3
13701
4567
HAZARDOUS AREA LIGHTING FIXTURES AND ACCESSORIES
-
-
-
Installation, connection, testing and commissioning of following types of flame proof/Div.2 lighting fixtures and accessories, including cable termination and connection, fixing of cable glands, lugs, including supply of necessary hardwares, including transportation from store/yard to site at the place of installation, unpacking, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
Well glass type pole mounting type for Ground Level.
5
1720
344
FLP double obstruction aviation fixture.
12
11700
975
Tube light type, column/ceiling mounted
1
81
81
Well glass type pole mounting type for Platform.
12
4128
344
Well glass type bracket mounted.
60
15480
258
Well glass type ceiling mounted.
5
1290
258
Bulk head type, column/ceiling mounted.
5
2105
421
Flood light fixtures.
180
124020
689
3-way, junction box.
10
1150
115
4-way, junction box.
3
345
115
Supply of following FLP/Div.2 lighting fixtures complete with lamps, requisite FLP cable glands, plugs and necessary control gear as per EIL standard specification No. 6-51-0061, data sheet for lighting fixture schedule, including all albour and materials, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
FLP LED-1 Fixture IIA/IIB (60-65 W) & accessories complete with LED lamp.
1
3798
3798
FLP LED-2 Fixture IIA/IIB (100-105 W) & accessories complete with LED lamp.
1
5055
5055
FLP LED-3 Fixture IIA/IIB (150-155 W) & accessories complete with LED lamp.
1
5772
5772
FLP LED-FD2 Fixture IIA/IIB (100-105 W) & accessories complete with LED lamp.
1
7396
7396
FLP LED-FD3 Fixture IIA/IIB (150-155 W) & accessories complete with LED lamp.
1
10660
10660
Supply and installation of Type-`A' clamps(for bracket mounted lighting fixtures) including bolt (MOC SS304) for fixing the fixture to the clamp as per EIL std.no.7-51-0221, including supply and fixing of anchor fasteners, nuts and bolts, washers etc. as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
60
34260
571
Supply and installation of Type-`B' clamps(for ceiling mounted lighting fixtures) including bolt (MOC SS304) for fixing the fixture to the clamps per EIL std.no.7-51-0221, including supply and fixing of anchor fastners,nuts and bolts,washers as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
5
2375
475
Supply and installation of adapters for Platform and ground pole mounted lighting fixtures as per EIL std.no.7-51-0221, approved drawings, specifications of this tender and directions of Engineer- in-Charge.
10
2240
224
SAFE AREA LIGHTING FIXTURES
-
-
-
Supply, installation, testing and commissioning of following energy efficient lighting fixtures and connecting to wiring junction box/marshalling box complete with lamps and necessary control gear including supply of all connected materials like flexible conduit, clamps, supports, chains, anchor fastners, bolts, nuts and washers etc. as required, including supply and fixing of cable glands, lugs, including all labour and materials, as per approved drawings, data sheet for lighting fixture schedule, EIL installation standards, specifications of this tender and directions of
Engineer-in-Charge.
-
-
-
Type LED 1 Fixtures.
3
10689
3563
Type LED 2 Fixtures.
3
10689
3563
Type LED 3 Fixtures.
3
3813
1271
Type LED 5 Fixtures.
3
10689
3563
Type LED 6 Fixtures.
3
4269
1423
Type LED 8 Fixtures.
3
6798
2266
Type LED IND-1 Fixtures.
3
3855
1285
Type LED IND-2 Fixtures.
3
6006
2002
Type LED IND-4 Fixtures.
3
11103
3701
Type LED RSD-10 Fixtures.
3
3855
1285
Type LED SFD-12 Fixtures.
3
3855
1285
Type LED LB-1 Fixtures.
3
27180
9060
Type LED HB-1 Fixtures.
3
33168
11056
Type LED HB-2 Fixtures.
3
46560
15520
Type LED BK-1 Fixtures.
3
2823
941
Type LED BK-2 Fixtures.
3
11790
3930
Type LED BK-3 Fixtures.
3
14199
4733
Type LED ST-4 Fixtures.
3
22548
7516
Type LED ST-10 Fixtures.
3
21516
7172
Type LED FD-1 Fixtures.
3
22548
7516
FANS AND EXHAUST FANS
-
-
-
Supply, installation, connection, testing and commissioning of following types of exhaust fans including supply of all necessary supports etc., including fixing of cable glands, lugs with BEE(Bureau of Energy Efficiency) rating of minimum 3 star including all labour and materials and accessories like mounting frame, fixing bolt, wire guard/louvres etc., as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
300 mm dia., 1 phase, 900 rpm, wall mounting type epoxy painted exhaust fan with louvres.
3
10314
3438
450 mm dia., 1 phase, 900 rpm, wall mounting type epoxy painted exhaust fan with louvres.
3
13758
4586
450 mm dia., 1 phase, 900 rpm, wall mounting type epoxy painted exhaust fan with louvres suitable for Gas group IIC, temperature class T3.
1
6796
6796
Supply, installation, connection, testing and commissioning of 240 V AC, 1200 mm sweep ceiling fan with regulator (labeled as minimum 3-star by Bureau of Energy Efficiency)including providing clamp/hook in RCC slab, if necessary, providing, fixing, ceiling, rose, wiring, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer- in-Charge.
3
6873
2291
SOCKETS / RECEPTACLES AND SWITCHES / MCB UNITS
-
-
-
Supply, installation, connection, testing and commissioning of following ratings of 240 V, single phase, sockets/receptacles and metallic outlet boxes as described below including supply of all connected materials, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
6 A, 5 pin plate type flush/ surface mounting sockets/receptacles.
3
603
201
16/6 A, 6 pin plate type flush/ surface mounting sockets/receptacles.
3
1041
347
20 A, 3 pin surface mounted industrial type switch socket with plug and sheet steel painted box.
3
4578
1526
Supply, installation, connection, testing and commissioning of following ratings of 240 V, single phase switches/MCB units, including outlet boxes and associated accessories, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
5 A, plate type flush/surface mounted switches.
3
573
191
15 A, plate type flush/surface mounted switches.
3
675
225
32A, DP MCB unit in moulded case enclosure for window / split type air conditioner.
3
4476
1492
JUNCTION BOXES (OUTDOOR / INDOOR TYPE)
-
-
-
Supply and installation of dust and vermin proof G.I. sheet steel (1.6 mm thick) junction box WP type suitable for outdoor/indoor installation with number of outgoing ways as under, complete with PVC connectors, supply and fixing of cable glands, including supply of required size and number of terminals, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
3 way.
5
7000
1400
4 way.
5
7690
1538
Supply and installation of dust and vermin proof G.I. sheet steel (1.6 mm thick) junction box suitable for indoor installation, complete with 15A, 20 terminals, supply and fixing of cable glands for incoming cable and knock outs for conduit entry for outgoing circuits, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in- Charge.
-
-
-
Junction box.
1
1893
1893
LIGHTING / POWER PANELS AND DISTRIBUTION BOARDS
-
-
-
Supply, installation, connection, testing and commissioning of flame proof weather proof lighting/power panels (for gas group IIA/IIB) as per EIL std. spec. 6-51-0008, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer- in-Charge.
-
-
-
40 A, 4 pole incomer MCB isolator and 6 Nos. outgoing double pole MCBs (upto 20 A) and
ELCBs in each outgoing circuit
1
37259
37259
Supply, installation, connection, testing and commissioning of safe area lighting/power panels, surface/flush mounting type, wall mounting type in dust tight (with hinged cover) sheet steel enclosure having 4 pole incomer and single pole MCB (9 kA type) for outgoing circuit control with complete wiring, including cable termination, connection and fixing of cable glands, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
40 A, 4 pole incomer MCB isolator and 6 Nos. outgoing single pole MCBs (upto 20 A) and ELCBs in each outgoing circuit
1
15778
15778
63 A, 4 pole incomer MCB isolator and 6 Nos. outgoing single pole MCBs (upto 32 A) and ELCBs in each outgoing circuit
1
22491
22491
40 A, 4 pole incomer MCB isolator and 6 Nos. outgoing single pole MCBs (upto 20 A) and ELCBs in each outgoing circuit, suitable for outdoor, IP 55 weatherproof
1
18245
18245
40 A, 4 pole incomer MCB isolator and 12 Nos. outgoing single pole MCBs (upto 20 A) and
ELCBs in each outgoing circuit
1
24671
24671
63 A, 4 pole incomer MCB isolator and 18 Nos. outgoing single pole MCBs (upto 20 A) and
ELCBs in each outgoing circuit
5
177575
35515
WIRING
-
-
-
Supply and laying of (concealed type) PVC conduit of following diameter and associated fittings in brick walls, RCC slabs/ceilings for lighting/ power/telephone, fire alarm/plant communication points etc., including supply of G.I. sheet steel junction boxes with acrylic cover, pull wire, making cuts and chasis in built up brick work, RCC slabs/ceilings and making good the same, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
25 mm diameter.
60
3300
55
40 mm diameter.
60
5880
98
Circuit wiring in non-hazardous areas using (size given below), copper conductor, XLPE insulated, FRLS outer sleeve cables (third core for earthing), from lighting/power panel/distribution junction box, excluding the supply of cable, junction boxes and cable glands but including termination and connection, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
3 C x 2.5 sq. mm
300
7800
26
3 C x 4 sq. mm
60
1920
32
Circuit wiring in hazardous areas using (sizes given below) copper conductor, XLPE insulated, FRLS outer sleeve armoured cables (third core for earthing) from lighting/power panel/distribution junction box onwards, excluding the supply of cables, junction boxes and cable glands but including fixing of cable glands, supply and fixing of clamps, cable terminations and connections, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
3 C x 2.5 sq. mm
7500
217500
29
3 C x 4 sq. mm
60
2160
36
Circuit wiring with 660 V grade, (sizes given below), FRLS PVC insulated copper wires in already laid surface/concealed conduit from lighting panel/power panel onwards including the supply of wires, termination and connection, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
3 Nos x 1.5 sq. mm
60
2520
42
3 Nos x 2.5 sq. mm
60
2940
49
5 Nos x 1.5 sq. mm
60
3120
52
5 Nos x 2.5 sq. mm
60
3780
63
7 Nos x 1.5 sq. mm
60
4320
72
7 Nos x 2.5 sq. mm
60
6000
100
9 Nos x 1.5 sq. mm
60
6180
103
Circuit wiring in non-hazardous areas using (size given below), copper conductor, XLPE insulated, FRLS outer sleeve cables (third core for earthing) from lighting panel/distribution junction box onwards including the supply of cable, junction boxes and cable glands, including termination and connection, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
3 C x 2.5 sq. mm armoured Cu cables.
600
43800
73
Supply and laying of (surface type) G.I. conduit of following diameter and associated fittings from lighting/ power, telephone, fire alarm/plant communication points etc., including supply of G.I. sheet steel junction boxes with acrylic cover, pull wire, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
25 mm diameter.
10
1640
164
40 mm diameter.
10
2480
248
Supply and laying of (surface type) approved make of black enamelled steel conduit of following diameter and associated fittings from lighting/power panel, telephone, fire alarm/plant communication points etc., including supply of G.I. sheet steel junction boxes with acrylic cover, pull wire, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
25 mm diameter.
60
6360
106
40 mm diameter.
60
10560
176
Supply and installation of 50 mm x 50 mm, (18 SWG) 'METSEC' channel with removable cover, including supply of all connected hardware, supports, all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
60
23220
387
Circuit wiring with 660 V grade (sizes given below) PVC insulated copper conductor wires in already installed metsec channel including the supply of wires, termination, connection and harnessing of wires etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
1.5 sq. mm wires.
60
1380
23
2.5 sq. mm wires.
60
2160
36
EMERGENCY LIGHTING
-
-
-
Supply, installation, connection, testing and commissioning of emergency lighting unit (min. 5W, 100 lumens output) fed by a self- contained battery rated for 2 hours and charger operating on 240 V AC supply, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
1
3438
3438
SOIL RESISTIVITY
-
-
-
Measurement of soil resistivity in accordance with IS:3043, including all labour and materials, as per approved drawings, specifications of this tender and at locations as per directions of Engineer-in-Charge.
1
5164
5164
EARTH ELECTRODES
-
-
-
Supply, installation, testing and commissioning of maintenance free chemical earth pits complete with earth electrode with Cu bonded high tensile low carbon steel core electrode, as per drawing B269-999-16-50-4004 and all necessary materials including excavation of earth pit, filling with maintenance free chemical for ease of operation and maintenance, back filling, providing necessary brick work, connections, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
40
1101600
27540
EARTH STRIPS
-
-
-
Supply, installation and connection of following GI earthing strip along the cable trenches or cable trays or fixing to walls or structures including welding at joints, providing anti-corrosive paint or bitumen and jute covering for welded portion, clamping and necessary hardware for connecting, etc., including all labour and materials, as per approved drawings, specifications of this tender
and directions of Engineer-in-Charge.
-
-
-
75 x 10 mm
60
23160
386
50 x 6 mm
1500
370500
247
40 x 5 mm
1500
286500
191
25 x 3 mm
120
13800
115
100x 12 mm
600
288600
481
Supply, installation and connection of following GI earthing strip buried individually at a depth of
500 mm including welding at joints, providing anti-corrosive paint or bitumen and jute covering for welded portion, clamping and necessary hardware for connecting, excavation and refilling etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
75 x 10 mm
60
26460
441
50 x 6 mm
2700
823500
305
40 x 5 mm
60
16080
268
25 x 3 mm
60
11460
191
100 x 12 mm
120
64680
539
EARTHING CONNECTION
-
-
-
Connecting individual equipment to the earth strip or earth plate with following sizes of G.I. wire / G.I. wire rope including the supply of G.I. wire /G.I. wire rope, lugs, conductors, connecting to the G.I. strip or earth plate and necessary hardware for connection, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
3/8" dia (10 mm) flexible rope.
600
51600
86
5/8" dia (16 mm) flexible rope.
300
46800
156
8 SWG GI Wire.
300
6300
21
Supply and installation of 5 m long, 25 sq. mm (168/0.01772") insulated single core copper flexible conductor with crimped type lug at one end and approved crocodile clip at other end, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
5 m long, 25 sq. mm (168/0.01772") insulated single core Cu flexible conductor.
3
5724
1908
Supply and installation of 25 sq. mm (168/0.01772") copper flexibles of following length with copper lugs crimped on both sides for earthing of pipeline vessels, equipments (non electrical) as per std. 7- 51-0112, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
300 mm
25
10525
421
500 mm
60
29820
497
1500 mm
12
10968
914
EARTH PLATES
-
-
-
Supply, installation and connection of GI earth plates as per std. 7-51-0103, complete with anchor bolts, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
GI earth plate as per std. 7-51-0103.
40
30440
761
CABLES FOR NGR CONNECTION
-
-
-
Connecting neutral of the transformer/Generator through following single core PVC/XLPE insulated cable to NGR including supply of Al/Cu conductor, PVC/XLPE insulated, unarmoured and PVC sheathed cables, clamps, necessary supports, all hardware, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in- Charge.
-
-
-
6.6 kV 185 mm² XLPE insulated Aluminium conductor cable for NGR connection
10
10610
1061
EARTHING CONNECTORS
-
-
-
Supply and installation of MS ear of width 50 mm and thickness 5 mm for earthing of process vessels, steel structures, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
Minimum 75mm to maximum 300 mm long
5
3155
631
EARTHING CABLES
-
-
-
Supply of 1100 V grade, multi stranded Copper Conductor, XLPE/PVC insulated and unarmoured cables (with green/yellow strips or green colour outer sleeve) of following sizes as per EIL standard specification No. 6-51-0051, data sheet, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
1 C x 185 Sqmm
60
86760
1446
Termination & connection of leads of 1100 V grade, multi stranded Copper Conductor, XLPE/PVC insulated and unarmoured, cables of following sizes for earthing of equipment, including supply of lugs, supply and fixing of GI saddles and saddle bars, cutting and stripping of cable insulation, crimping the lug on to the conductor, clamping of the cable, including all labour and materials as per approved drawings, specifications of this tender and directions of Engineer- in-Charge
-
-
-
1 C x 185 Sqmm
5
10040
2008
PLANT COMMUNICATION SYSTEM
-
-
-
Installation, termination, connection, testing and commissioning of following plant communication system (including back up battery bank, battery charger etc.), including transportation from store/yard to site at the place of installation, assembling and installing in foundation or fixing to wall/structure, aligning, levelling, grouting, cable termination, wiring and all inter-connection and making earth connection etc., first charging of battery, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
Acoustic hood (FLP/industrial type).
7
3612
516
Desk type intercom station upto 24 keys.
3
3444
1148
Desk type intercom station with above 24 and upto 54 Keys.
3
5337
1779
Weather Proof Intercom station with upto 3 Nos dual position Keys (FLP/Industrial type)
12
5508
459
Weather proof loudspeakers (FLP/Industrial Type).
8
2296
287
Loud speakers with amplifier (FLP/industrial type).
8
4128
516
Beacon Lamps (FLP/industrial type).
7
3213
459
Installation, testing and commissioning of flameproof and weatherproof type plant communication junction box (PAJB) suitable for gas group IIA/IIB or IIC, temperature class T3 with Krone/screw type terminals, including termination and connections of incoming and outgoing non-jelly filled cables, excluding supply of flameproof double compression cable glands, including all labour and materials, as per specifications of this tender and direction of Engineer-in-Charge.
-
-
-
PAJB with 1 nos 50 Pair incoming cable(s) and 10 nos 5 Pair outgoing cable(s)
1
4877
4877
TELEPHONE SYSTEM
-
-
-
Supply of weatherproof type telephone system junction box (TDJB) suitable for outdoor installation with Krone/screw type terminals, including supply of weatherproof double compression cable glands and weatherproof plugs to block the unused entry including all labour and materials, as per specifications of this tender and direction of Engineer-in-Charge.
-
-
-
Weather proof TDJB with 1 No. 20 Pair incoming cable(s) and 20 Nos. 1 Pair outgoing cable(s)
1
3718
3718
Installation, testing and commissioning of weatherproof type telephone system junction box (TDJB) suitable for outdoor installation with Krone/screw type terminals, including termination and connections of incoming and outgoing non-jelly filled cables, excluding supply of weatherproof double compression cable glands, including all labour and materials, as per specifications of this tender and direction of Engineer-in-Charge.
-
-
-
Weather proof TDJB with 1 nos 20 Pair incoming cable(s) and 20 nos 1 Pair outgoing cable(s)
1
633
633
FIRE ALARM SYSTEM
-
-
-
Installation, termination and connection of following fire alarm panel including Power Pack and battery backup system and all associated items, including transportation from store/yard to site at the place of installation, assembling and installation on foundation or fixing to wall or steel structures, aligning, levelling, grouting, termination and connection of cables, making earth connections etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
Break glass type fire alarm boxes.
90
30960
344
Exit signs.
3
516
172
Hooters.
3
603
201
Sirens with starters.
3
1032
344
Multi sensor type detectors
3
1635
545
Fault Isolator modules
3
1032
344
Input/Monitoring relay module
3
1032
344
Output/Control Relay Module
3
1032
344
Zonal/Repeat fire alarm panels.
1
2582
2582
Hooter Acknowledge Box
3
1635
545
Heat detectors.
3
345
115
Linear beam detectors.
3
1119
373
LAYING OF COMMUNICATION / FIRE ALARM CABLES
-
-
-
Horizontal and vertical laying/pulling through of communication/fire alarm cables of the following overall diameters in ready trays / trenches / conduits or supported on structures including supplying and fixing of GI saddle and saddle bars, stainless steel strip number tags, including transportation from store/yard to site at the place of installation, unpacking, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge
-
-
-
Cables of overall dia. upto 35 mm.
12000
276000
23
Cables of overall dia. above 35 mm.
10800
345600
32
Laying of HDPE ducts for laying of optical fiber cables between various substations, pulling through pipes or supported on structures including supplying and fixing of GI saddle and saddle bars, including supply and fixing of printed stainless steel/ non magnetic non corrosive metal tags, including transportation from store/yard to site at the place of installation, unpacking, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge
-
-
-
HDPE duct with overall dia. Upto 60mm
30600
703800
23
Laying of optical fiber cables between various buildings in already laid HDPE conduits for plant communication and fire alarm data highway, feeder differential protection, etc., including supply of all hardware, splice connectors, accessories, pulling through pipes or supported on structures including supply and fixing of printed stainless steel/ non magnetic non corrosive metal tags, including transportation from store/yard to site at the place of installation, unpacking, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
Cables of overall dia. upto 40 mm.
30600
856800
28
STRAIGHT THROUGH JOINTS COMMUNICATION / FIRE ALARM CABLES
-
-
-
Making of straight through joints for polyethylene insulated armoured jelly filled/ non filled overall PVC jacketed, including supply of all necessary materials for the joint, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in- Charge.
-
-
-
For Non-Jelly filled cables of size 2.5 mm² 2 pair
3
1593
531
For Non-Jelly filled cables of size 2.5 mm² 4 pair
3
2295
765
For Non-Jelly filled cables of size 2.5 mm² 6 pair
3
2997
999
For Non-Jelly filled cables of size 2.5 mm² 12 pair
3
4131
1377
END TERMINATIONS FOR COMMUNICATION/ FIRE ALARM CABLES.
-
-
-
Supply ,Installation, testing and commissioning of Fiber Optic Patch panel (LIU) for following type & number of fiber for OFCs including all accessories for terminating, pigtails with Connectors, patch cords with connectors, Splicing sleeves and splice tray including all labour and materials as per approved drawings specifications of this tender and directions of engineer-in-Charge
-
-
-
For 8 fiber Mono mode cable with LC pigtails and LC patch cords
5
102930
20586
For 8 fiber Mono mode cable with LC pigtails and SC patch cords
5
102930
20586
For 8 fiber Mono mode cable with LC pigtails and ST patch cords
5
102930
20586
For 8 fiber Mono mode cable with SC pigtails and LC patch cords
5
102930
20586
For 8 fiber Mono mode cable with SC pigtails and SC patch cords
5
102930
20586
For 8 fiber Mono mode cable with SC pigtails and ST patch cords
5
102930
20586
For 8 fiber Mono mode cable with ST pigtails and LC patch cords
5
102930
20586
For 8 fiber Mono mode cable with ST pigtails and SC patch cords
5
102930
20586
For 8 fiber Mono mode cable with ST pigtails and ST patch cords
5
102930
20586
Termination of optical fiber cables for various systems including supply of all hardware, splice connectors, accessories, including all labour and materials as per approved drawings specifications of this tender and directions of engineer-in-Charge
-
-
-
8 Fiber
60
302940
5049
SUPPLY OF COMMUNICATION / FIRE ALALRM CABLE / CONDUITS / DUCTS
-
-
-
Supply of Mono mode, jelly filled, Optical fiber cable with non metallic armour with following number of cores & construction, as per EIL standard specifications, data sheet, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
8 Fiber unitube construction
22200
1598400
72
Supply of HDPE ducts for laying of optical fiber cables between various substations, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge
-
-
-
HDPE duct with overall dia. Upto 60mm
22000
2728000
124
CIVIL WORKS/M.S. CHEQUERED PLATE
-
-
-
Excavation and backfilling of trenches for cables and earth strip etc. , for a maximum depth of 1.5 m, shoring, shuttering and dewatering (if necessary) including consolidation and disposal of surplus earth up to a distance of 30 m, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. (Excavated trench dimensions shall be measured).
-
-
-
Excavation and backfilling of trenches in all types of soil except rock.
5
1720
344
Supply and laying of 40 mm size gravel in one layer of 100/150 mm thick including dressing of soil surface and laying the aggregate in uniform layer and density, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in- Charge ( Aggregate will be measured in boxes of size 1.5 m x 1.5 m x 0.5 m which shall be taken as 1 cubic metre, the boxes are to be furnished by the contractor free of cost for measuring purposes).
-
-
-
40 mm size gravel.
96
135840
1415
Supply and spreading of approved fine river sand/stone dust in cable trenches, including all labour and materials, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
Stone dust grading Zone-II, grading limits as per IS-383.
3300
5174400
1568
Supply and spreading of approved FLY ASH BRICKS - TYPE-5 of 75 mm thickness in cable trenches for cable protection, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. (Actual area of laid brick surfaces shall be measured).
-
-
-
Bricks.
2150
1653350
769
Providing and laying plain cement concrete for all depths below and up to a plinth level in foundations including tamping, ramming, vibrating, curing, shuttering etc. all as specified in any shape, position, thickness and finishing the top surface rough or smooth as specified and
directed, including supply of all materials and all complete for concrete of M-15 grade with 20 mm and down size graded crushed stone aggregates, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
Plain cement concrete.
3
16353
5451
Supply, fabrication and installation of 6 mm thick M.S. chequered plate for covering floor cut- outs/cable trenches etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
6 mm thick M.S. chequered plate.
60
206280
3438
Supply and installation of fire proof sealing system as per IEC-60332 including supply and fabrication of steel frames and other accessories (cement, gravel, sand etc.) including drilling, cutting, welding, surface preparation, dressing/ chipping of concrete, enlargement etc. including all minor masonry and structural works and repair of all damages in line with the enclosed job specification and instructions of the Engineer-in-Charge
57
2422272
42496
Making through and through cut outs in pockets of size 150 mm dia in the RCC floor/walls of trenches/buildings of thickness upto 200mm for facilitation cable entries using concrete cutting machines including all labour and materials as per approved drawings, specifications of this tender and directions of Engineer -in-charge
3
2409
803
Making through and through cut outs in pockets of following shape and size in the RCC floor/ walls of trenches/ buildings of thickness above 200 mm and upto 400 mm for facilitating cable/ duct entries, using concrete cutting machines and making cut out good using plastering and painting including all material and labour as per approved drawings, specification of this tender and directions of Engineer-in-charge.
-
-
-
Circular Cut Out of diameter 150 mm
1
871
871
Rectangular Cut Out of length 200 mm width 200 mm
1
1050
1050
Rectangular Cut Out of length 300 mm width 300 mm
1
1747
1747
LAN SYSTEMS
-
-
-
Supply, installation, connection, testing and commissioning of following ratings of 240 V, single phase, sockets/receptacles/switches as described below including all connected materials, outlet boxes and associated accessories including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
3 Nos 6 A, 5 pin flush/ surface mounting sockets/receptacles with 1 Nos 15 A, piano type flush/surface mounted switches.
3
2151
717
3 nos 6 A, 5 pin plate type flush/ surface mounting sockets/receptacles with 1 Nos 15 A, plate type flush/surface mounted switches.
3
2151
717
PAINTING & MARKING
-
-
-
Letter painting and marking of all buses of switchboards, all incomers, bus couplers, outgoings with details of Tag No, feeder rating in KW/Amp, sending end source, in the front of the panels and bus bar, panel nos.etc. on the rear side of the panels for all switchboards, all other substation equipment viz. transformers, capacitors, neutral grounding resistors, VFD panels, other panels etc. for equipment housed in electrical substations including supply of all material such as stickers, enamel paints, stencil, etc including supply of all labour, materials as per the specification of this tender and directions of Engineer-in-Charge.
-
-
-
Each alphabet/character upto 2 inch in height/length
3600
32400
9
Each alphabet/character above 2 inch and Upto 4 inch in height/length
14000
182000
13
Each alphabet/character above 4 inch and Upto 8 inch in height/length
10200
204000
20
Each alphabet/character above 8 inch and Upto 12 inch in height/length
1200
40800
34
Letter painting of tag nos., applicable circuit nos. for identification with red/black/white paint for all outdoor equipment in safe and hazardous areas viz. light fittings, control gear boxes, lighting/power panels, welding receptacles, convenience receptacles, local control stations, fire alarm manual call points, fire alarm detectors, motors, field call stations, loud speakers, etc. including supply of enamel paint, all hardware as required, supply of all labour, materials as per the specification of this tender and directions of Engineer-in-Charge.
-
-
-
Each alphabet/character above 2 inch and Upto 4 inch in height/length
5200
67600
13
Each alphabet/character above 4 inch and Upto 8 inch in height/length
2400
48000
20
Each alphabet/character above 8 inch and Upto 12 inch in height/length
1000
34000
34
MCB BOX
-
-
-
MCB BOX for Battery Rooms
-
-
-
Supply, installation, connection, testing and commissioning of safe area MCB Box surface / flush mounted type, wall mounting type (with hinged cover) sheet steel enclosure with canopy having 4 nos. single pole MCBs (9kA type, upto 20 A) with complete wiring, suitable for outdoor, IP 55 weatherproof, including cable termination, connection and fixing of cable glands (for 4 nos. incoming and 4 nos. outgoing, 3C X 2.5 sqmm. armoured cables), including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
1
11819
11819
Modular cable duct
-
-
-
Supply of modular cable duct made of Polyolefin or equivalent chemically inert material of inside width (240 mm or above), inside height (150 mm or above) in lengths of 1 meter or higher with flame retardant property and with detachable type duct cover of high mechanical strength and provision to drain accumulated water inside duct complete with all accessories required for laying of duct and other technical parameters as per drawings, specifications of tender and directions of engineer-in-charge for laying of power and communication cables.
740
2292520
3098
Laying of light weight modular cable duct made of Polyolefin or equivalent chemically inert material of inside width (240 mm or above), inside height (150 mm or above) in lengths of 1 meter or higher as per drawings, specifications of tender and directions of engineer-in-charge for laying of power and communication cables.
360
170280
473
Supply of Manpower :
Agency to provide & mobilise following manpower as per instructions of Engineer in-charge for delivering exclusive service to B AND R . However, 2 weeks' notice shall be given for mobilisation and 1 day notice shall be given for demobilisation. Note that quoted rate of manpower deployment shall be inclusive of cost towards required PPEs, facilities ecessary for functioning at site and complience of applicable Statutory obligation e.g P.F. & ESI etc. (1 Man-Month should be considered as 30 man-days).
-
-
-
DISCIPLINE ENGINEER :
-
-
-
ELECTRICAL
20
850000
42500
SUPERVISOR
-
-
-
ELECTRICAL
20
561000
28050
LICENSED ELECTRICIAN
20
561000
28050
"NOTE:-
THE ABOVE RATE SHALL BE INCLUSIVE OF ALL TAXES & DUTIES, ROYALTIES, CESS, FEE, ENVIORMENTAL & POLLUTION, FITNESS & SAFETY CLEARANCE CHARGES (IF ANY), OR ANY OTHER INCIDENTAL CHARGES ETC BUT EXCLUDING GST."
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements