Bridge And Roof Company India Limited Tender
... More
If you want to inquire about any e-tender the Haryana government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Haryana tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Haryana etender you're looking for. Read further to learn how to search and bid for etender Haryana.
Technical
Technical
Financial
Class Of Bidder
... View More
Class-I local supplier or Class-II local supplier.
Bid Capacity
... View More
The bid capacity required to bid in the given tender is determined by the bidder's experience in executing "Similar Works" within the last 7 years. The bidder must fulfill one of the following experience criteria: 1. 03 similar completed works, each costing at least Rs. 1.28 Crore.
2. 02 similar completed works, each costing at least Rs. 1.61 Crore.
3. 01 similar completed work, costing at least Rs. 2.57 Crore. To calculate the current costing level of executed works, the formula is:
Current Cost = Actual Value * (1 + 7%/year) ^ number of years Where Actual Value is the original cost of the work, and the number of years is the time elapsed since the work's execution, calculated from the date of bid opening. Additionally, the Earnest Money Deposit (EMD) value is Rs. 6,44,000.00, which can be submitted as an Account Payee Demand Draft or a Bank Guarantee. However, this is not directly stated as the bid capacity but is a requirement for bidding.
Technical Capacity
... View More
The bidder should have prior work experience with an average Annual Financial Turnover of not less than Rs. 0.97 Crore during the last 03 years ending 31.03.2024. The experience criteria for similar works are as follows: - 03 similar completed works each costing not less than Rs. 1.28 Crore, - OR 02 similar completed works each costing not less than Rs. 1.61 Crore, - OR 01 similar completed work costing not less than Rs. 2.57 Crore.
For running works, substantial completion should not be less than 80% (value-wise). The value of executed works shall be enhanced at a simple rate of 7% per annum.
Costs
EMD
₹ 6,44,000Document Cost
₹ 12,666Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_BandR_846009_1Tender No
BANDR/HO/71148/ ELECTRICAL/NIT/SC/03Tender Authority
Bridge And Roof Company India Limited ViewPurchaser Address
-Website
http://eprocure.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
eNIT-Electrical-PKG-4-Panipat-SC-03
BOQ Items
... More
Filtration of transformer oil with dissolved gas analysis test.
600
13
7800
... More
Filtration of transformer oil without dissolved gas analysis test.
3750
11
41250
... More
SWITCHBOARDS / UPS / VSD / BATTERY CHARGERS / PANELS
-
-
-
... More
Installation, testing and commissioning of switch-boards, relay and control panels, annunciation panels, UPS system, battery chargers, distribution boards, cubicles with electrical equipment, VSD panels, misc .electrical panels etc., including transportation from store/yard to site at the place of installation, lifting the panels by deployment of tyre mounted hydraulic trollies, unpacking, assembly, including mounting and wiring of loose parts supplied by equipment vendor, interconnection of shipping sections and requisite inter-panel wiring between shipping sections, including supply of all wiring materials, installation on foundations or fixing to wall or steel structures, aligning, levelling, grouting, testing and calibration of relays and meters etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
... More
Weight of the Unit upto 100 kg
1
1409
1409
... More
Weight of the Unit from 101 upto 500 kg.
1
1864
1864
... More
Weight of the Unit from 501 upto 1000 kg.
25
2693
67325
... More
Weight of the Unit from 1001 upto 1500 kg.
3
3314
9942
... More
Weight of the Unit from 1501 upto 3000 kg.
9
5966
53694
... More
Weight of the Unit from 3001 upto 5000 kg.
1
9321
9321
... More
Installation of switch-boards, relay and control panels, annunciation panels, UPS system, battery chargers, distribution boards, cubicles with electrical equipment, VSD panels, misc .electrical panels etc., including transportation from store/yard to site at the place of installation, lifting the panels by deployment of tyre mounted hydraulic trollies, unpacking, assembly, including mounting and wiring of loose parts supplied by equipment vendor, interconnection of shipping sections and requisite inter-panel wiring between shipping sections, including supply of all wiring materials, installation on foundations or fixing to wall or steel structures, aligning, levelling, grouting, testing and calibration of relays and meters etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
... More
Weight of the Unit upto 100 kg
1
1118
1118
... More
Weight of the Unit from 101 upto 500 kg.
22
1864
41008
... More
Weight of the Unit from 501 upto 1000 kg.
10
2693
26930
... More
Weight of the Unit from 1001 upto 1500 kg.
1
3314
3314
... More
Installation, testing and commissioning of bus ducts of following ratings between transformer secondary and the switchgear incomer panel, including transportation from store/yard to site at the place of installation, unpacking, making connections and installation of bends, breaking of walls and making good of the same etc., (but excluding structural supports), including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
... More
Air Insulated/segregated bus ducts 415 V 2000 A 65 kA for 1 second
11
1367
15037
... More
Air Insulated/segregated bus ducts 415 V 4000 A 65 kA for 1 second
11
1989
21879
... More
Air Insulated/segregated bus ducts 6600 V 2500 A 40 kA for 1 second
11
2155
23705
... More
MISCELLANEOUS CONTROL GEAR
-
-
-
... More
Installation, testing and commissioning of miscellaneous surface mounted industrial/FLP control gear such as lighting/power panel, push button stations, motor starter, communication equipment, junction boxes, panels, plugs, sockets, including supply of necessary hardware, touch up painting including supply of paint, including transportation from store/yard to site at the place of installation, unpacking, (excluding fixing of cable glands and cable terminations), including all labour and materials, as per approved drawings, specifications of this tender and directions ofEngineer-in-Charge.
-
-
-
... More
Weight of the unit up to 5 kg.
25
166
4150
... More
Weight of the unit above 5 kg. but upto 20 kg.
6
611
3666
... More
Weight of the unit above 20 kg. but upto 100 kg.
15
829
12435
... More
Weight of the unit above 100 kg. but upto 200 kg.
1
1450
1450
... More
Supply of Industrial, weather proof type Push Button stations of polycarbonate or similar metallurgy with other requirements as per EIL specification No. 6-51-0014, as per approved drawings, specifications of this tender and directions of Engineer-in Charge.
-
-
-
... More
With 2 stop push button with protective covering
2
5568
11136
... More
PLUGS, SOCKETS AND JUNCTION BOXES
-
-
-
... More
Supply of weatherproof metal clad 415V, TPN, industrial type socket and plug with heavy duty interlocking switch, with adequately sized cable adaptor box for incoming and outgoing cable terminations, including supply of double compression brass nickel plated cable glands, tinned copper lugs, including all labours and materials, as per approved drawings, specifications of thistender and directions of Engineer-in-Charge.
-
-
-
... More
63 A, 415 V, 5 pin sockets along with associated 5 pin plugs.
1
9970
9970
... More
100 A, 415 V, 5 pin sockets along with associated 5 pin plugs.
1
14914
14914
... More
Supply, installation, cable termination, connection, testing and commissioning of following types of FLP and WP junction boxes, as per EIL specification No. 6-51-0061, including all labours and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
... More
FLP(II A/II B) and WP 3 way JB complete with 3 Nos. FLP cable glands and 1 Nos. blocking plug suitable for cables upto 3 x 2.5 sq. mm YWY / XWY cable.
5
2647
13235
... More
FLP(II A/II B) and WP 4 way JB complete with 4 Nos. FLP cable glands and 2 Nos. blocking plug suitable for cables upto 3 x 2.5 sq. mm YWY / XWY cable.
1
3145
3145
... More
CANOPIES
-
-
-
... More
Supply, fabrication and installation of canopies for miscellaneous outdoor equipment like motors, fire alarm points, telephones, communication hand set stations etc. to render them weatherproof made out of 1.6 mm (16 gauge) sheet steel including supply of hardware and paint, painting, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
35
83
2905
... More
ANCHOR FASTENERS
-
-
-
... More
Supply, drilling in RCC and fixing of metallic anchor fasteners for supporting of cable trays and miscellaneous electrical switchgear of following sizes, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
... More
3/16" BSW.
281
43
12083
... More
5/16" BSW.
281
49
13769
... More
1/4" BSW.
281
48
13488
... More
3/8" BSW.
1225
62
75950
... More
5/8" BSW.
3975
73
290175
... More
1/2" BSW.
2650
83
219950
... More
TESTING AND COMMISSIONING OF MOTORS
-
-
-
... More
Testing and commissioning of MV motors of following ratings and checking of all interface connections, change of grease, wherever required, including supply of approved type of grease, no load/full load running of motor, including all labour and materials, as per approved drawings,specifications of this tender and directions of Engineer-in-Charge.
-
-
-
... More
Upto 5.5 kW.
18
918
16524
... More
Above 5.5 kW but upto 11 kW.
4
1225
4900
... More
Above 11 kW but upto 22 kW.
4
1450
5800
... More
Above 22 kW but upto 45 kW.
1
1657
1657
... More
Above 45 kW but upto 75 kW.
1
2072
2072
... More
Above 75 kW but upto 125 kW.
6
2486
14916
... More
Above 125 kW but upto 160 kW.
1
3314
3314
... More
Testing and commissioning of HV motors of following ratings and checking of all interface connections, change of grease in bearings, wherever required, including supply of approved type of grease, no load/full load running of motor, including all labour and materials, as per specifications of this tender and directions of Engineer-in-Charge.
-
-
-
... More
Above 1200 kW but upto 2000 kW.
2
9943
19886
... More
Above 160 kW but upto 400 kW.
3
4764
14292
... More
Testing and commissioning of safe area/ FLP motor operated valve actuators with integral starter of different sizes, checking of all interface connections, local/remote controls, settings of limit and torque switches, no load/full load running, including all labour and materials, as per specifications of this tender and directions of Engineer-in-Charge.
-
-
-
... More
Safe area/FLP motor operated valve actuators.
7
1035
7245
... More
Testing and commissioning of 415V, TPN, Lube Oil Heaters of following ratings, checking of all interface connections, including all labour and materials, as per approved drawings, specificationsof this tender and directions of Engineer-in- Charge
-
-
-
... More
Upto 5.5 kW
1
918
918
... More
Above 5.5 kW and upto 11 kW
1
1225
1225
... More
Above 11 kW and upto 22kW
1
1450
1450
... More
SUPPLY OF MV CABLES
-
-
-
... More
Supply of 1100 V grade, Copper Conductor,XLPE insulated and armoured, cables of following sizes as per EIL standard specification No. 6-51-0051, data sheets, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
... More
3 C x 2.5 sq. mm
700
62
43400
... More
Supply of 1100 V grade, Aluminium Conductor, XLPE insulated and armoured, cables of following sizes as per EIL standard specification No. 6-51-0051, data sheets, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
... More
3.5 C x 35 sq. mm
300
108
32400
... More
3.5 C x 70 sq. mm
300
229
68700
... More
3.5 C x 185 sq. mm
125
531
66375
... More
Supply of 1100 V grade, Copper Conductor, Individual pair shielded & Overall shielded, twisted pair/triad, XLPE insulated, Armored, FRLS outer-sheathed cables of following sizes as per EIL standard specification No. 6-51-0052, data sheets, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
... More
2 Pair x 2.5 sq. mm
300
120
36000
... More
6 Pair x 2.5 sq. mm
300
279
83700
... More
12 Pair x 2.5 sq. mm
300
504
151200
... More
LAYING OF CABLES
-
-
-
... More
Laying of cables of different voltage grade and types of the following overall diameters in ready trays/trenches/ supported on structure/pull through pipes including supply and fixing of stainless steel strip number tags, supply and applying of fireproofing paint to meet OISD requirement (for 1m length near terminations), supply and fixing of GI saddles & saddle bars etc., including transportation from store/yard to site at the place of installation, unpacking, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer- in-Charge
-
-
-
... More
Cables with OD upto 20 mm.
17500
7
122500
... More
Cables with OD above 20 mm but upto 30 mm.
9600
11
105600
... More
Cables with OD above 30 mm but upto 40 mm.
10750
15
161250
... More
Cables with OD above 40 mm but upto 50 mm.
1500
19
28500
... More
Cables with OD above 50 mm but upto 60 mm.
1075
27
29025
... More
Cables with OD above 60 mm but upto 80 mm.
1050
33
34650
... More
Cables with OD above 80 mm but upto 100 mm.
8500
46
391000
... More
Laying of cables(using cable pulling by motorized winch with torque limits) of different voltage grade and types of the following overall diameters in ready trays/trenches/ supported on structure/pull through pipes including supply and fixing of stainless steel strip number tags, supply and applying of fireproofing paint to meet OISD requirement (for 1m length near terminations), supply and fixing of GI saddles & saddle bars etc., including transportation from store/yard to site at the place of installation, unpacking, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge
-
-
-
... More
Cables with OD upto 20 mm.
7000
7
49000
... More
Cables with OD above 30 mm but upto 40 mm.
5250
15
78750
... More
Cables with OD above 40 mm but upto 50 mm.
500
19
9500
... More
Cables with OD above 50 mm but upto 60 mm.
375
27
10125
... More
Cables with OD above 60 mm but upto 80 mm.
500
33
16500
... More
Cables with OD above 80 mm but upto 100 mm.
3850
46
177100
... More
Laying of 66 kV (E), Copper conductor, XLPE insulated, unarmoured cables of following sizes in trefoil formation by bracing using clamps at intervals not exceeding 2 meters and binding with tapes in line with IS (Indian Standards), in ready trays/ trenches/ supported on structure/pull through pipes including supply, installation and fixing of bracing clamps for trefoil formation, binding tapes, stainless steel strip number tags, supply and applying of fireproofing paint to meet OISD requirement (for 1m length near terminations), supply and fixing of GI saddles and saddle bars etc., including transportation from store/yard to site at the place of installation, unpacking, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.(Cable quantity mentioned is for 1 Run of single core cable)
-
-
-
... More
1C x 300 sqmm.
9150
228
2086200
... More
1C x 400 sqmm.
2375
265
629375
... More
Laying of 66 kV (E), Copper conductor, XLPE insulated, unarmoured cables of following sizes (using cable pulling by motorized winch with torque limits) in trefoil formation by bracing using clamps at intervals not exceeding 2 meters and binding with tapes in line with IS (Indian Standards), in ready trays/ trenches/ supported on structure/pull through pipes including supply, installation and fixing of bracing clamps for trefoil formation, binding tapes, stainless steel strip number tags, supply and applying of fireproofing paint to meet OISD requirement (for 1m length near terminations), supply and fixing of GI saddles and saddle bars etc., including transportation from store/yard to site at the place of installation, unpacking, including all labour and materials, as per approved drawings, specifications of this tender and directions ofEngineer-in-Charge.(Cable quantity mentioned is for 1 Run of single core cable)
-
-
-
... More
1C x 300 sqmm
3400
257
873800
... More
1C x 400 sqmm
1050
294
308700
... More
END TERMINATIONS
-
-
-
... More
Termination of XLPE insulated armoured power cables (up to 1100 V grade) and connection of leads excluding the supply of cable glands and lugs but including fixing of cable glands, supply and fixing of PVC shrouds for outdoor terminations, cutting and stripping of cable insulation, crimping the lug on to the conductor, clamping of the cable-cores, marking with wire number, ferrules etc., including all labour and materials, as per approved drawings, specifications of thistender and directions of Engineer-in-Charge.
-
-
-
... More
Cables with OD upto 20 mm.
260
126
32760
... More
Cables with OD above 20 mm but upto 30 mm.
88
181
15928
... More
Cables with OD above 30 mm but upto 40 mm.
88
224
19712
... More
Cables with OD above 40 mm but upto 50 mm.
70
316
22120
... More
Cables with OD above 50 mm but upto 60 mm.
105
408
42840
... More
Cables with OD above 60 mm but upto 80 mm.
4
629
2516
... More
Termination of communication, fire alarm & control paired cables and connection of leads excluding the supply of cable glands and lugs but including fixing of cable glands, supply and fixing of PVC shrouds for outdoor terminations, cutting, stripping of cable insulation, crimping the lug on to the conductor, clamping of the cable- cores, marking with wire number, ferrules etc., including all labour and materials, as per approved drawings, specifications of this tender anddirections of Engineer-in-Charge.
-
-
-
... More
All sizes from 1P to 4P and upto 2.5 sq. mm
155
150
23250
... More
All sizes from 5P to 10P and upto 2.5 sq. mm
70
181
12670
... More
All sizes from 11P to 15P and upto 2.5 sq. mm
70
243
17010
... More
Fire proofing of cables including supply of all fire proofing paint, including all labour and materials, as per IEC-60331, specifications of this tender and directions of Engineer-in- Charge. (Actual area of surface painted shall be measured).
12
882
10584
... More
Termination of Earthed grade EHV cables and connection of leads including supply and fixing of PVC shrouds for outdoor terminations, cutting and stripping of cable insulation, crimping the lug onto the conductor, restoration of the insulation, clamping of cable cores and earthing of armour, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. (Excluding supply of heat / cold shrinkable termination kits ).
-
-
-
... More
1 Core cable termination kit for 66 kV 400 mm²
2
14749
29498
... More
1 Core cable termination kit for 66 kV 300 mm²
13
13920
180960
... More
Supply of Unearthed grade H.V. termination kits of (indoor/outdoor type) as per EIL standard specification No. 6-51-0051, excluding cable glands and lugs, as per approved drawings and asper specifications of this tender and directions of Engineer-in-Charge.
-
-
-
... More
3 Core cable Indoor termination kit for 6.6 kV 300 mm²
35
5300
185500
... More
3 Core cable Indoor termination kit for 6.6 kV 185 mm²
5
4907
24535
... More
Termination of Unearthed grade HV cables and connection of leads including fixing of cable glands, supply and fixing of PVC shrouds for outdoor terminations, cutting and stripping of cable insulation, crimping the lug onto the conductor, restoration of the insulation, clamping of cable cores and earthing of armour, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. (Excluding supply oftermination kits and cable glands).
-
-
-
... More
3 Core cable termination kit for 6.6 kV 300 mm²
35
2361
82635
... More
3 Core cable termination kit for 6.6 kV 185 mm²
5
2155
10775
... More
STRAIGHT THROUGH JOINTS
-
-
-
... More
Supply and Making of heat shrinkable type straight through joints for 1100 volt grade power cables as per EIL standard specification No. 6-51-0051, including cutting, stripping of cable insulation complete with supply of compression / crimping type ferrules, plastic mould and epoxy resin compound etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
... More
Cables with OD upto 20 mm.
1
1157
1157
... More
Cables with OD above 20 mm but upto 30 mm.
1
1930
1930
... More
Cables with OD above 30 mm but upto 40 mm.
1
2759
2759
... More
Cables with OD above 40 mm but upto 50 mm.
1
3619
3619
... More
Cables with OD above 50 mm but upto 60 mm.
1
4969
4969
... More
Cables with OD above 60 mm but upto 80 mm.
1
5982
5982
... More
Making of Straight through joints for E.H.V. cables of following sizes excluding supply of jointing kit and accessories, including all labour and materials, as per approved drawings, specificationsof this tender and directions of Engineer-in-Charge.
-
-
-
... More
1 Core cable Straight through jointing kits for 66 kV 400 mm²
2
11385
22770
... More
1 Core cable Straight through jointing kits for 66 kV 300 mm²
12
9580
114960
... More
Supply and Making of heat shrinkable type straight through joints for communication, fire alarm & control paired cables, including cutting, stripping of cable insulation complete with supply of compression / crimping type ferrules, plastic mould and epoxy resin compound etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
... More
All sizes from 1P to 4P and upto 2.5 sq. mm
1
1241
1241
... More
All sizes from 5P to 10P and upto 2.5 sq. mm
1
1961
1961
... More
All sizes from 11P to 15P and upto 2.5 sq. mm
1
2802
2802
... More
Supply of heat shrinkable type Straight through jointing kits for Unearthed grade H.V. cables of the following sizes, as per EIL standard specification No. 6-51-0051, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
... More
3 Core cable Straight through jointing kits for 6.6 kV 300 mm²
1
13242
13242
... More
3 Core cable Straight through jointing kits for 6.6 kV 185 mm²
1
11045
11045
... More
Making of Straight through joints for H.V. cables of following sizes excluding supply of jointing kit and accessories, including all labour and materials, as per approved drawings, specifications ofthis tender and directions of Engineer-in-Charge.
-
-
-
... More
3 Core cable Straight through jointing kits for 6.6 kV 300 mm²
1
2361
2361
... More
3 Core cable Straight through jointing kits for 6.6 kV 185 mm²
1
2155
2155
... More
G.I. & PVC PIPES
-
-
-
... More
Supply and laying of following sizes of G.I. Pipes (medium) in required length fixed on steel, concrete or similar structure, laid in trenches, ready to be buried in concrete including cutting, threading, bending and similar works, supply of clamps, small iron structures, spacers and installation of seats, plugs, bushings etc., small civil works, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
... More
50 mm NB.
66
317
20922
... More
100 mm NB.
66
721
47586
... More
80 mm NB.
33
555
18315
... More
160 mm NB.
33
1055
34815
... More
Supply and laying of following sizes of PVC Pipes in required length fixed on steel, concrete or similar structure, laid in trenches, ready to be buried in concrete including cutting, threading, supply of bends and similar works, supply of clamps, small iron structures, spacers and installation of seats, plugs, bushings etc., small civil works, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
... More
50 mm NB.
6
126
756
... More
100 mm NB.
6
464
2784
... More
80 mm NB.
6
218
1308
... More
160 mm NB.
6
594
3564
... More
STRUCTURAL STEEL
-
-
-
... More
Supply, fabrication and installation of MS base frames, supports for switchgear, and brackets for miscellaneous electrical equipments, cable and cable tray supports out of rolled MS sections, pipes, plates etc. including shot blasting, welding, bolting, riveting, supply of necessary anchor bolts and grouting etc., supply of paint and applying of anti-rust primer coat and finished coats of approved synthetic enamel paint as per Specification for surface preparation and protective coating, B269-000-02-42-PCS-0001suitable for highly corrosive environment, including breaking walls, floors etc. for structures as required including supply of all GI hardware materials, all labour and materials complete as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. (Any item weighing up to 1kg. or less shall neither be measured nor paid).
9500
60
570000
... More
Supply and installation of push button station supports complete with base plate, foundations bolts, grouting and painting as per Specification for surface preparation and protective coating,B269-000 -02-42-PCS-0001 suitable for highly corrosiveenvironment etc., including all labour and materials, as per approved drawings and directions of Engineer-in-Charge.
-
-
-
... More
As per std. 7-51-0306
42
1127
47334
... More
As per std. 7-51-0307
3
1127
3381
... More
As per std. 7-51-0308
3
1334
4002
... More
As per std. 7-51-0317
3
1433
4299
... More
CABLE - TRAYS
-
-
-
... More
Installation of prefabricated hot dip galvanised steel cable trays, fabricated out of hot rolled sheet steel with rigid welded construction ladder type with a rung as per std. 7-51-0333, of approved make and cable tray fittings, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
... More
300 mm wide Straight run cable tray.
35
137
4795
... More
450 mm wide Straight run cable tray.
70
165
11550
... More
600 mm wide Straight run cable tray.
35
176
6160
... More
750 mm wide Straight run cable tray.
35950
192
6902400
... More
Reducers 750 - 450 RHS.
3
302
906
... More
Reducers 750 - 450 LHS.
3
302
906
... More
Reducers 600 - 300 RHS.
1
302
302
... More
Reducers 600 - 300 LHS.
1
302
302
... More
Horizontal bends for 300 mm wide tray with 1000 mm bending radius.
1
302
302
... More
Horizontal bends for 450 mm wide tray with 1000 mm bending radius.
1
302
302
... More
Horizontal bends for 600 mm wide tray with 1000 mm bending radius.
1
302
302
... More
Horizontal bends for 750 mm wide tray with 1000 mm bending radius.
40
302
12080
... More
Vertical outside bends for 300 mm wide tray with 1000 mm bending radius
1
302
302
... More
Vertical outside bends for 450 mm wide tray with 1000 mm bending radius.
3
302
906
... More
Vertical outside bends for 600 mm wide tray with 1000 mm bending radius.
1
302
302
... More
Vertical outside bends for 750 mm wide tray with 1000 mm bending radius.
3
302
906
... More
Vertical inside bends for 300 mm wide tray with 1000 mm bending radius
1
302
302
... More
Vertical inside bends for 450 mm wide tray with 1000 mm bending radius.
1
302
302
... More
Vertical inside bends for 600 mm wide tray with 1000 mm bending radius.
1
302
302
... More
Vertical inside bends for 750 mm wide tray with 1000 mm bending radius.
3
302
906
... More
Tee Joints for 300 mm wide tray with 1000 mm bending radius.
1
302
302
... More
Tee Joints for 450 mm wide tray with 1000 mm bending radius.
1
302
302
... More
Tee Joints for 600 mm wide tray with 1000 mm bending radius.
1
302
302
... More
Tee Joints for 750 mm wide tray with 1000 mm bending radius.
4
302
1208
... More
1000 mm wide Straight run cable tray.
35
272
9520
... More
Reducers 1000 - 750 RHS.
3
750
2250
... More
Reducers 1000 - 750 LHS.
3
750
2250
... More
Horizontal bends for 750 mm wide tray with 1750 mm bending radius.
3
701
2103
... More
Horizontal bends for 750 mm wide tray with 2000 mm bending radius.
3
741
2223
... More
Horizontal bends for 1000 mm wide tray with 2000 mm bending radius.
1
841
841
... More
Vertical outside bends for 750 mm wide tray with 1750 mm bending radius.
3
662
1986
... More
Vertical outside bends for 750 mm wide tray with 2000 mm bending radius.
70
721
50470
... More
Vertical outside bends for 1000 mm wide tray with 2000 mm bending radius.
1
900
900
... More
Vertical inside bends for 750 mm wide tray with 1750 mm bending radius.
3
721
2163
... More
Vertical inside bends for 750 mm wide tray with 2000 mm bending radius.
58
900
52200
... More
Vertical inside bends for 1000 mm wide tray with 2000 mm bending radius.
1
1000
1000
... More
Tee Joints for 750 mm wide tray with 1750 mm bending radius.
3
1000
3000
... More
Tee Joints for 750 mm wide tray with 2000 mm bending radius.
3
1102
3306
... More
Installation of following galvanised slotted channel trays of 2 mm thickness and 50 mm high for supporting cables, including all labour and materials, as per approved drawings,specifications of this tender and directions of Engineer-in-Charge.
-
-
-
... More
100 mm wide.
825
79
65175
... More
150 mm wide.
475
89
42275
... More
60 mm wide.
475
69
32775
... More
Supply , Fabrication and installation of 0.91 mm (20 gauge) GI sheet covers for cable trays, including necessary hardwares, including all labour and materials, as per approved drawings,specifications of this tender and directions of Engineer-in-Charge.
6740
437
2945380
... More
CABLE GLANDS
-
-
-
... More
Supply of nickel-plated, flame proof IIA/IIB double compression type brass cable glands, suitable for out door terminations of armoured PVC cables of following overall diameter (excluding termination and connection of cables), including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
... More
Cables with OD upto 20 mm.
6
143
858
... More
Cables with OD above 20 mm but upto 30 mm.
6
248
1488
... More
Cables with OD above 30 mm but upto 40 mm.
6
453
2718
... More
Cables with OD above 40 mm but upto 50 mm.
6
595
3570
... More
Cables with OD above 50 mm but upto 60 mm.
6
890
5340
... More
Cables with OD above 60 mm but upto 80 mm.
6
1113
6678
... More
Cables with OD above 80 mm but upto 100 mm.
6
1432
8592
... More
Supply of nickel-plated, flame proof IIC double compression type brass cable glands, suitable for out door terminations of armoured PVC cables of following overall diameter (excluding termination and connection of cables), including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
... More
Cables with OD upto 20 mm.
6
193
1158
... More
Cables with OD above 20 mm but upto 30 mm.
6
261
1566
... More
Cables with OD above 30 mm but upto 40 mm.
6
502
3012
... More
Cables with OD above 40 mm but upto 50 mm.
6
686
4116
... More
Cables with OD above 50 mm but upto 60 mm.
6
1043
6258
... More
Cables with OD above 60 mm but upto 80 mm.
6
1332
7992
... More
Cables with OD above 80 mm but upto 100 mm.
6
1611
9666
... More
Supply of nickel plated brass double compression cable glands suitable for outdoor installations (WP) of following overall diameter (excluding termination and connections of cables), including drilling of suitable holes in equipments for fixing purposes etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
... More
Cables with OD upto 20 mm.
6
127
762
... More
Cables with OD above 20 mm but upto 30 mm.
6
187
1122
... More
Cables with OD above 30 mm but upto 40 mm.
6
412
2472
... More
Cables with OD above 40 mm but upto 50 mm.
6
590
3540
... More
Cables with OD above 50 mm but upto 60 mm.
6
839
5034
... More
Cables with OD above 60 mm but upto 80 mm.
6
1282
7692
... More
Cables with OD above 80 mm but upto 100 mm.
6
1826
10956
... More
Supply of nickel plated brass single compression cable glands of following overall diameter (excluding termination and connections of cables), including drilling of suitable holes in equipments for fixing purposes etc., including all labour and materials, as per approved drawings,specifications of this tender and directions of Engineer-in-Charge.
-
-
-
... More
Cables with OD upto 20 mm.
2
77
154
... More
Cables with OD above 20 mm but upto 30 mm.
2
137
274
... More
Cables with OD above 30 mm but upto 40 mm.
2
261
522
... More
Cables with OD above 40 mm but upto 50 mm.
2
285
570
... More
Cables with OD above 50 mm but upto 60 mm.
2
388
776
... More
Cables with OD above 60 mm but upto 80 mm.
2
453
906
... More
Cables with OD above 80 mm but upto 100 mm.
2
532
1064
... More
Supply and fixing of FLP(IIA/IIB) blocking plugs for blocking unused cable entries with following diameter in outdoor electrical equipment including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
... More
Cables with OD up to 20 mm
2
175
350
... More
Cables with OD above 20 mm but upto 30 mm
2
248
496
... More
Cables with OD above 30 mm but upto 40 mm
2
329
658
... More
Cables with OD above 40 mm but upto 50 mm
2
441
882
... More
Cables with OD above 50 mm but upto 60 mm
2
532
1064
... More
Cables with OD above 60 mm but upto 80 mm
2
617
1234
... More
Cables with OD above 80 mm but upto 100 mm
2
786
1572
... More
Supply and fixing of FLP(IIC) blocking plugs for blocking unused cable entries with following diameter in outdoor electrical equipment including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
... More
Cables with OD up to 20 mm
2
184
368
... More
Cables with OD above 20 mm but upto 30 mm
2
261
522
... More
Cables with OD above 30 mm but upto 40 mm
2
334
668
... More
Cables with OD above 40 mm but upto 50.0 mm
2
482
964
... More
Cables with OD above 50 mm but upto 60 mm
2
572
1144
... More
Cables with OD above 60 mm but upto 80 mm
2
656
1312
... More
Cables with OD above 80 mm but upto 100 mm
2
844
1688
... More
MARKERS
-
-
-
... More
Supply and installation of cable markers as per std. 7-51-0301, for underground cable runs with 14 SWG enamelled steel plate with white lettering on jade green background inclusive of providing and fixing supports, including all labour and materials, as per approved drawings,specifications of this tender and directions of Engineer-in-Charge.
2
825
1650
... More
Supply and installation of earth pit markers for directly buried GI pipe electrodes with 14 SWG enamelled steel plate engraved with white letters BURIED, EARTH ELECTRODE on JADE green background complete with support and foundation as per approved drawings, specifications of this tender and direction of Engineer-in-Charge.
2
825
1650
... More
CABLE LUGS
-
-
-
... More
Supply of crimping type long barrel tinned copper lugs with circular/sector shaped barrel for following conductor sizes, as per approved drawings, specifications of this tender and directionsof Engineer-in-Charge.
-
-
-
... More
All sizes upto 10 sq. mm
6
9
54
... More
All sizes from 16 to 35 sq. mm
6
14
84
... More
All sizes from 50 to 185 sq. mm
6
116
696
... More
All sizes from 240 to 400 sq. mm
6
354
2124
... More
Supply of crimping type long barrel aluminium lugs with circular/sector shaped barrel for following conductor sizes, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
... More
All sizes upto 10 sq. mm
6
4
24
... More
All sizes from 16 to 35 sq. mm
6
9
54
... More
All sizes from 50 to 185 sq. mm
6
38
228
... More
All sizes from 240 to 400 sq. mm
6
152
912
... More
Supply of crimping type long barrel Bimetallic lugs with Al barrel & tinned Cu palm with circular/sector shaped barrel for following conductor sizes, as per approved drawings,specifications of this tender and directions of Engineer-in-Charge.
-
-
-
... More
All sizes upto 10 sq. mm
6
10
60
... More
All sizes from 16 to 35 sq. mm
6
16
96
... More
All sizes from 50 to 185 sq. mm
6
129
774
... More
All sizes from 240 to 400 sq. mm
6
265
1590
... More
Supply of crimping type long barrel Bimetallic lugs with tinned Cu barrel & Al palm with circular/sector shaped barrel for following conductor sizes, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
... More
All sizes upto 10 sq. mm
6
16
96
... More
All sizes from 16 to 35 sq. mm
6
28
168
... More
All sizes from 50 to 185 sq. mm
6
66
396
... More
All sizes from 240 to 400 sq. mm
6
91
546
... More
ADAPTORS / REDUCERS / NIPPLES ETC.
-
-
-
... More
Supply and fixing nickel-plated brass adaptors/ reducers for cable glands of following sizes including all labour and materials complete as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. Adaptors shall have male part threaded as per Eqpt. threads and the other end to receive glands having E.T. thread.
-
-
-
... More
Eqpt. Thread 3/4" PF (J.I.S.)-E.T. Thread 3/4"ET
6
258
1548
... More
Eqpt. Thread 1" PF (J.I.S.) - E.T. Thread 3/4"ET
6
269
1614
... More
Eqpt. Thread 1" PF (J.I.S.) -E.T. Thread 1"ET
6
358
2148
... More
Eqpt. Thread 1-1/2" PF (J.I.S.)- E.T. Thread 1-1/4"ET
6
388
2328
... More
Eqpt. Thread 1-1/2" PF (J.I.S.)- E.T. Thread 1-1/2"ET
6
443
2658
... More
Eqpt. Thread 2" PF (J.I.S.) -E.T. Thread 1-1/2"ET
6
690
4140
... More
Supply and fixing FLP(IIA/IIB), weatherproof, nickel-plated brass adaptors/reducers for cable glands of following sizes including all labour and materials complete as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. Adaptors shall have male part threaded as per Eqpt. threads and the other end to receive glands having E.T. thread.
-
-
-
... More
Eqpt. Thread 3/4" PF (J.I.S.)-E.T. Thread 3/4"ET
6
310
1860
... More
Eqpt. Thread 1" PF (J.I.S.) -E.T. Thread 3/4"ET
6
322
1932
... More
Eqpt. Thread 1" PF (J.I.S.) -E.T. Thread 1"ET
6
430
2580
... More
Eqpt. Thread 1-1/2" PF (J.I.S.)- E.T. Thread 1-1/4"ET
6
465
2790
... More
Eqpt. Thread 1-1/2" PF (J.I.S.)- E.T. Thread 1-1/2"ET
6
531
3186
... More
Eqpt. Thread 2" PF (J.I.S.) -E.T. Thread 1-1/2"ET
6
801
4806
... More
Supply and fixing FLP(IIC), weatherproof, nickel-plated brass adaptors/reducers for cable glands of following sizes including all labour and materials complete as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. Adaptors shall have male part threaded as per Eqpt. threads and the other end to receive glands having E.T. thread.
-
-
-
... More
Eqpt. Thread 3/4" PF (J.I.S.)-E.T. Thread 3/4"ET
2
445
890
... More
Eqpt. Thread 1" PF (J.I.S.) -E.T. Thread 3/4"ET
2
456
912
... More
Eqpt. Thread 1" PF (J.I.S.) -E.T. Thread 1"ET
2
564
1128
... More
Eqpt. Thread 1-1/2" PF (J.I.S.)- E.T. Thread 1-1/4"ET
2
599
1198
... More
Eqpt. Thread 1-1/2" PF (J.I.S.)- E.T. Thread 1-1/2"ET
2
665
1330
... More
Eqpt. Thread 2" PF (J.I.S.) -E.T. Thread 1-1/2"ET
2
994
1988
... More
LIGHTING POLES
-
-
-
... More
Installation of platform Lighting pole as per std. 7-51-0202, including all welding, structural works, paint and all sundry materials as required, including painting, (excluding supply and installation of control gear box/junction box), but including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
... More
Lighting poles including supply and connection of wires upto fixtures for safe areas.
6
902
5412
... More
Lighting poles for hazardous areas.
13
980
12740
... More
Installation of street lighting poles (single bracket/double bracket) including built in marshalling box and necessary wire/cable running from marshalling box to the lighting fixture, cable termination and connection, fixing of cable glands and lugs, including all civil works, excavation, foundation, disposal of surplus earth, providing shoring, strutting and dewatering if required and including supply of cement, steel, GI pipes, base plates, paint and all sundry materials as required, including painting, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
... More
Poles as per std. 7-51-0233 FLP MB for Gas IIA/IIB, Temp Class T3 for hazardous area
6
3233
19398
... More
Poles as per std. 7-51-0234 sht. 1 of 2 (Single bracket)
6
3395
20370
... More
Poles as per std. 7-51-0234 sht. 1 of 2 (Double bracket)
6
3565
21390
... More
Poles as per std. 7-51-0234 sht. 2 of 2 (Single bracket)
140
3743
524020
... More
Poles as per std. 7-51-0234 sht. 2 of 2 (Double bracket)
6
3930
23580
... More
Poles as per std. 7-51-0235 sht. 1 of 2
2
4789
9578
... More
Poles as per std. 7-51-0235 sht. 2 of 2
2
5747
11494
... More
Installation of G.I. light pole for aviation lights including all civil works, structural steel works, foundation, providing shoring, strutting and de-watering as required and including supply of cement, steel, GI pipes, base plates, adaptors, reducers, paint and all sundry materials as required, including painting, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge
-
-
-
... More
Poles as per std. 7-51-0220 Detail-1
2
1302
2604
... More
Poles as per std. 7-51-0220 Detail-2
2
1108
2216
... More
HAZARDOUS AREA LIGHTING FIXTURES AND ACCESSORIES
-
-
-
... More
Installation, connection, testing and commissioning of following types of flame proof/Div.2 lighting fixtures and accessories, including cable termination and connection, fixing of cable glands, lugs, including supply of necessary hardwares, including transportation from store/yard to site at the place of installation, unpacking, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
... More
Well glass type pole mounting type for Ground Level.
6
248
1488
... More
FLP double obstruction aviation fixture.
13
704
9152
... More
Well glass type pole mounting type for Platform.
13
248
3224
... More
Well glass type bracket mounted.
66
186
12276
... More
Well glass type ceiling mounted.
6
186
1116
... More
Bulk head type, column/ceiling mounted.
6
304
1824
... More
Flood light fixtures.
209
498
104082
... More
3-way, junction box.
13
83
1079
... More
4-way, junction box.
2
83
166
... More
Supply and installation of Type-`A' clamps(for bracket mounted lighting fixtures) including bolt (MOC SS304) for fixing the fixture to the clamp as per EIL std.no.7-51-0221, including supply and fixing of anchor fasteners, nuts and bolts, washers etc. as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
66
412
27192
... More
Supply and installation of Type-`B' clamps(for ceiling mounted lighting fixtures) including bolt (MOC SS304) for fixing the fixture to the clamps per EIL std.no.7-51-0221, including supply and fixing of anchor fastners,nuts and bolts,washers as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
6
343
2058
... More
Supply and installation of adapters for Platform and ground pole mounted lighting fixtures as perEIL std.no.7-51-0221, approved drawings, specifications of this tender and directions of Engineer- in-Charge.
13
162
2106
... More
SAFE AREA LIGHTING FIXTURES
-
-
-
... More
Supply, installation, testing and commissioning of following energy efficient lighting fixtures and connecting to wiring junction box/marshalling box complete with lamps and necessary control gear including supply of all connected materials like flexible conduit, clamps, supports, chains, anchor fastners, bolts, nuts and washers etc. as required, including supply and fixing of cable glands, lugs, including all labour and materials, as per approved drawings, data sheet for lighting fixture schedule, EIL installation standards, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
... More
Type LED 1 Fixtures.
2
2573
5146
... More
Type LED 2 Fixtures.
2
2573
5146
... More
Type LED 3 Fixtures.
2
918
1836
... More
Type LED 5 Fixtures.
2
2573
5146
... More
Type LED 6 Fixtures.
2
1027
2054
... More
Type LED 8 Fixtures.
2
1636
3272
... More
Type LED IND-1 Fixtures.
2
928
1856
... More
Type LED IND-2 Fixtures.
2
1446
2892
... More
Type LED IND-4 Fixtures.
2
2672
5344
... More
Type LED RSD-10 Fixtures.
2
928
1856
... More
Type LED SFD-12 Fixtures.
2
928
1856
... More
Type LED LB-1 Fixtures.
2
6542
13084
... More
Type LED HB-1 Fixtures.
2
7983
15966
... More
Type LED HB-2 Fixtures.
2
11206
22412
... More
Type LED BK-1 Fixtures.
2
679
1358
... More
Type LED BK-2 Fixtures.
2
2838
5676
... More
Type LED BK-3 Fixtures.
2
3418
6836
... More
Type LED ST-4 Fixtures.
2
5427
10854
... More
Type LED ST-10 Fixtures.
2
5179
10358
... More
Type LED FD-1 Fixtures.
2
5427
10854
... More
FANS AND EXHAUST FANS
-
-
-
... More
Supply, installation, connection, testing and commissioning of following types of exhaust fans including supply of all necessary supports etc., including fixing of cable glands, lugs with BEE(Bureau of Energy Efficiency) rating of minimum 3 star including all labour and materials and accessories like mounting frame, fixing bolt, wire guard/louvres etc., as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
... More
300 mm dia., 1 phase, 900 rpm, wall mounting type epoxy painted exhaust fan with louvres.
2
2482
4964
... More
450 mm dia., 1 phase, 900 rpm, wall mounting type epoxy painted exhaust fan with louvres.
2
3311
6622
... More
Supply, installation, connection, testing and commissioning of 240 V AC, 1200 mm sweep ceiling fan with regulator (labeled as minimum 3-star by Bureau of Energy Efficiency)including providing clamp/hook in RCC slab, if necessary, providing, fixing, ceiling, rose, wiring, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
2
1654
3308
... More
SOCKETS / RECEPTACLES AND SWITCHES / MCB UNITS
-
-
-
... More
Supply, installation, connection, testing and commissioning of following ratings of 240 V, single phase, sockets/receptacles and metallic outlet boxes as described below including supply of all connected materials, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
... More
6 A, 5 pin plate type flush/ surface mounting sockets/receptacles.
2
145
290
... More
16/6 A, 6 pin plate type flush/ surface mounting sockets/receptacles.
2
251
502
... More
20 A, 3 pin surface mounted industrial type switch socket with plug and sheet steel painted box.
2
1102
2204
... More
Supply, installation, connection, testing and commissioning of following ratings of 240 V, single phase switches/MCB units, including outlet boxes and associated accessories, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
... More
5 A, plate type flush/surface mounted switches.
2
138
276
... More
15 A, plate type flush/surface mounted switches.
2
162
324
... More
32A, DP MCB unit in moulded case enclosure for window / split type air conditioner.
2
1077
2154
... More
JUNCTION BOXES (OUTDOOR / INDOOR TYPE)
-
-
-
... More
Supply and installation of dust and vermin proof G.I. sheet steel (1.6 mm thick) junction box WP type suitable for outdoor/indoor installation with number of outgoing ways as under, complete with PVC connectors, supply and fixing of cable glands, including supply of required size and number of terminals, including all labour and materials, as per approved drawings, specifications of thistender and directions of Engineer-in-Charge.
-
-
-
... More
3 way.
6
1011
6066
... More
4 way.
6
1111
6666
... More
LIGHTING / POWER PANELS AND DISTRIBUTION BOARDS
-
-
-
... More
Supply, installation, connection, testing and commissioning of safe area lighting/power panels, surface/flush mounting type, wall mounting type in dust tight (with hinged cover) sheet steel enclosure having 4 pole incomer and single pole MCB (9 kA type) for outgoing circuit control with complete wiring, including cable termination, connection and fixing of cable glands, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
... More
63 A, 4 pole incomer MCB isolator and 18 Nos. outgoing single pole MCBs (upto 20 A) and ELCBs in each outgoing circuit
7
25644
179508
... More
WIRING
-
-
-
... More
Supply and laying of (concealed type) PVC conduit of following diameter and associated fittings in brick walls, RCC slabs/ceilings for lighting/ power/telephone, fire alarm/plant communication points etc., including supply of G.I. sheet steel junction boxes with acrylic cover, pull wire, making cuts and chasis in built up brick work, RCC slabs/ceilings and making good the same, including all labour and materials, as per approved drawings, specifications of this tender and directions ofEngineer-in-Charge.
-
-
-
... More
25 mm diameter.
66
40
2640
... More
40 mm diameter.
66
71
4686
... More
Circuit wiring in non-hazardous areas using (size given below), copper conductor, XLPE insulated, FRLS outer sleeve cables (third core for earthing), from lighting/power panel/distribution junction box, excluding the supply of cable, junction boxes and cable glands but including termination and connection, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
... More
3 C x 2.5 sq. mm
331
19
6289
... More
3 C x 4 sq. mm
66
23
1518
... More
Circuit wiring in hazardous areas using (sizes given below) copper conductor, XLPE insulated, FRLS outer sleeve armoured cables (third core for earthing) from lighting/power panel/distribution junction box onwards, excluding the supply of cables, junction boxes and cable glands but including fixing of cable glands, supply and fixing of clamps, cable terminations and connections, including all labour and materials, as per approved drawings, specifications of this tender anddirections of Engineer-in-Charge.
-
-
-
... More
3 C x 2.5 sq. mm
8281
21
173901
... More
3 C x 4 sq. mm
66
26
1716
... More
Circuit wiring with 660 V grade, (sizes given below), FRLS PVC insulated copper wires in already laid surface/concealed conduit from lighting panel/power panel onwards including the supply of wires, termination and connection, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
... More
3 Nos x 1.5 sq. mm
66
30
1980
... More
3 Nos x 2.5 sq. mm
66
35
2310
... More
5 Nos x 1.5 sq. mm
66
38
2508
... More
5 Nos x 2.5 sq. mm
66
45
2970
... More
7 Nos x 1.5 sq. mm
66
52
3432
... More
7 Nos x 2.5 sq. mm
66
72
4752
... More
9 Nos x 1.5 sq. mm
66
74
4884
... More
Circuit wiring in non-hazardous areas using (size given below), copper conductor, XLPE insulated, FRLS outer sleeve cables (third core for earthing) from lighting panel/distribution junction box onwards including the supply of cable, junction boxes and cable glands, including termination and connection, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
... More
3 C x 2.5 sq. mm armoured Cu cables.
663
53
35139
... More
Supply and laying of (surface type) G.I. conduit of following diameter and associated fittings from lighting/ power, telephone, fire alarm/plant communication points etc., including supply ofG.I. sheet steel junction boxes with acrylic cover, pull wire, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
... More
25 mm diameter.
14
118
1652
... More
40 mm diameter.
14
179
2506
... More
Supply and laying of (surface type) approved make of black enamelled steel conduit of following diameter and associated fittings from lighting/power panel, telephone, fire alarm/plant communication points etc., including supply of G.I. sheet steel junction boxes with acrylic cover, pull wire, including all labour and materials, as per approved drawings, specifications of thistender and directions of Engineer-in-Charge.
-
-
-
... More
25 mm diameter.
66
77
5082
... More
40 mm diameter.
66
127
8382
... More
Supply and installation of 50 mm x 50 mm, (18 SWG) 'METSEC' channel with removable cover, including supply of all connected hardware, supports, all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
66
279
18414
... More
Circuit wiring with 660 V grade (sizes given below) PVC insulated copper conductor wires in already installed metsec channel including the supply of wires, termination, connection and harnessing of wires etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
... More
1.5 sq. mm wires.
66
17
1122
... More
2.5 sq. mm wires.
66
26
1716
... More
EARTH ELECTRODES
-
-
-
... More
Supply, installation, testing and commissioning of maintenance free chemical earth pits complete with earth electrode with Cu bonded high tensile low carbon steel core electrode, as per drawing B269-999-16-50-4004 and all necessary materials including excavation of earth pit, filling with maintenance free chemical for ease of operation and maintenance, back filling, providing necessary brick work, connections, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
35
19886
696010
... More
EARTH STRIPS
-
-
-
... More
Supply, installation and connection of following GI earthing strip along the cable trenches or cable trays or fixing to walls or structures including welding at joints, providing anti-corrosive paint or bitumen and jute covering for welded portion, clamping and necessary hardware for connecting, etc., including all labour and materials, as per approved drawings, specifications of this tenderand directions of Engineer-in-Charge.
-
-
-
... More
75 x 10 mm
66
279
18414
... More
50 x 6 mm
1656
178
294768
... More
40 x 5 mm
1656
138
228528
... More
25 x 3 mm
143
83
11869
... More
100x 12 mm
663
347
230061
... More
Supply, installation and connection of following GI earthing strip buried individually at a depth of 500 mm including welding at joints, providing anti-corrosive paint or bitumen and jute covering for welded portion, clamping and necessary hardware for connecting, excavation and refilling etc., including all labour and materials, as per approved drawings, specifications of this tender anddirections of Engineer-in-Charge.
-
-
-
... More
75 x 10 mm
66
318
20988
... More
50 x 6 mm
3181
220
699820
... More
40 x 5 mm
66
194
12804
... More
25 x 3 mm
66
138
9108
... More
100 x 12 mm
143
389
55627
... More
EARTHING CONNECTION
-
-
-
... More
Connecting individual equipment to the earth strip or earth plate with following sizes of G.I. wire /G.I. wire rope including the supply of G.I. wire /G.I. wire rope, lugs, conductors, connecting to theG.I. strip or earth plate and necessary hardware for connection, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
... More
3/8" dia (10 mm) flexible rope.
663
62
41106
... More
5/8" dia (16 mm) flexible rope.
331
113
37403
... More
8 SWG GI Wire.
331
15
4965
... More
Supply and installation of 5 m long, 25 sq. mm (168/0.01772") insulated single core copper flexible conductor with crimped type lug at one end and approved crocodile clip at other end, including all labour and materials, as per approved drawings, specifications of this tender anddirections of Engineer-in-Charge.
-
-
-
... More
5 m long, 25 sq. mm (168/0.01772") insulated single core Cu flexible conductor.
3
1378
4134
... More
Supply and installation of 25 sq. mm (168/0.01772") copper flexibles of following length with copper lugs crimped on both sides for earthing of pipeline vessels, equipments (non electrical) as per std. 7- 51-0112, including all labour and materials, as per approved drawings, specificationsof this tender and directions of Engineer-in-Charge.
-
-
-
... More
300 mm
33
304
10032
... More
500 mm
66
359
23694
... More
1500 mm
14
660
9240
... More
EARTH PLATES
-
-
-
... More
Supply, installation and connection of GI earth plates as per std. 7-51-0103, complete with anchor bolts, including all labour and materials, as per approved drawings, specifications of this tenderand directions of Engineer-in-Charge.
-
-
-
... More
GI earth plate as per std. 7-51-0103.
54
549
29646
... More
CABLES FOR NGR CONNECTION
-
-
-
... More
Connecting neutral of the transformer/Generator through following single core PVC/XLPE insulated cable to NGR including supply of Al/Cu conductor, PVC/XLPE insulated, unarmoured and PVC sheathed cables, clamps, necessary supports, all hardware, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
... More
6.6 kV 185 mm² XLPE insulated Aluminium conductor cable for NGR connection
14
766
10724
... More
EARTHING CONNECTORS
-
-
-
... More
Supply and installation of MS ear of width 50 mm and thickness 5 mm for earthing of process vessels, steel structures, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
... More
Minimum 75mm to maximum 300 mm long
6
456
2736
... More
EARTHING CABLES
-
-
-
... More
Supply of 1100 V grade, multi stranded Copper Conductor, XLPE/PVC insulated and unarmoured cables (with green/yellow strips or green colour outer sleeve) of following sizes as per EIL standard specification No. 6-51-0051, data sheet, specifications of this tender and directions ofEngineer-in-Charge.
-
-
-
... More
1 C x 185 Sqmm
66
1044
68904
... More
Termination & connection of leads of 1100 V grade, multi stranded Copper Conductor, XLPE/PVC insulated and unarmoured, cables of following sizes for earthing of equipment, including supply of lugs, supply and fixing of GI saddles and saddle bars, cutting and stripping of cable insulation, crimping the lug on to the conductor, clamping of the cable, including all labour and materials as per approved drawings, specifications of this tender and directions of Engineer-in-Charge
-
-
-
... More
1 C x 185 Sqmm
6
1450
8700
... More
PLANT COMMUNICATION SYSTEM
-
-
-
... More
Installation, termination, connection, testing and commissioning of following plant communication system (including back up battery bank, battery charger etc.), including transportation from store/yard to site at the place of installation, assembling and installing in foundation or fixing to wall/structure, aligning, levelling, grouting, cable termination, wiring and all inter-connection and making earth connection etc., first charging of battery, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
... More
Acoustic hood (FLP/industrial type).
7
373
2611
... More
Desk type intercom station upto 24 keys.
3
829
2487
... More
Desk type intercom station with above 24 and upto 54 Keys.
2
1285
2570
... More
Weather Proof Intercom station with upto 3 Nos dual position Keys (FLP/Industrial type)
14
331
4634
... More
Weather proof loudspeakers (FLP/Industrial Type).
10
207
2070
... More
Loud speakers with amplifier (FLP/industrial type).
10
373
3730
... More
Beacon Lamps (FLP/industrial type).
8
331
2648
... More
FIRE ALARM SYSTEM
-
-
-
... More
Installation, termination and connection of following fire alarm panel including Power Pack and battery backup system and all associated items, including transportation from store/yard to site at the place of installation, assembling and installation on foundation or fixing to wall or steel structures, aligning, levelling, grouting, termination and connection of cables, making earth connections etc., including all labour and materials, as per approved drawings, specifications ofthis tender and directions of Engineer-in-Charge.
-
-
-
... More
Break glass type fire alarm boxes.
99
248
24552
... More
Exit signs.
3
124
372
... More
Hooters.
3
145
435
... More
Sirens with starters.
3
248
744
... More
Multi sensor type detectors
3
394
1182
... More
Fault Isolator modules
3
248
744
... More
Input/Monitoring relay module
3
248
744
... More
Output/Control Relay Module
3
248
744
... More
Hooter Acknowledge Box
3
394
1182
... More
Heat detectors.
3
83
249
... More
Linear beam detectors.
3
269
807
... More
LAYING OF COMMUNICATION / FIRE ALARM CABLES
-
-
-
... More
Horizontal and vertical laying/pulling through of communication/fire alarm cables of the following overall diameters in ready trays/trenches/conduits or supported on structures including supplying and fixing of GI saddle and saddle bars, stainless steel strip number tags, including transportation from store/yard to site at the place of installation, unpacking, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge
-
-
-
... More
Cables of overall dia. upto 35 mm.
12250
17
208250
... More
Cables of overall dia. above 35 mm.
12525
23
288075
... More
Laying of HDPE ducts for laying of optical fiber cables between various substations, pulling through pipes or supported on structures including supplying and fixing of GI saddle and saddle bars, including supply and fixing of printed stainless steel/ non magnetic non corrosive metal tags, including transportation from store/yard to site at the place of installation, unpacking, including all labour and materials, as per approved drawings, specifications of this tender anddirections of Engineer-in-Charge
-
-
-
... More
HDPE duct with overall dia. Upto 60mm
31988
17
543796
... More
Laying of optical fiber cables between various buildings in already laid HDPE conduits for plant communication and fire alarm data highway, feeder differential protection, etc., including supply of all hardware, splice connectors, accessories, pulling through pipes or supported on structures including supply and fixing of printed stainless steel/ non magnetic non corrosive metal tags, including transportation from store/yard to site at the place of installation, unpacking, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
... More
Cables of overall dia. upto 40 mm.
31988
20
639760
... More
STRAIGHT THROUGH JOINTS COMMUNICATION / FIRE ALARM CABLES
-
-
-
... More
Making of straight through joints for polyethylene insulated armoured jelly filled/ non filled overall PVC jacketed, including supply of all necessary materials for the joint, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in- Charge.
-
-
-
... More
For Non-Jelly filled cables of size 2.5 mm² 2 pair
3
383
1149
... More
For Non-Jelly filled cables of size 2.5 mm² 4 pair
3
552
1656
... More
For Non-Jelly filled cables of size 2.5 mm² 6 pair
3
721
2163
... More
For Non-Jelly filled cables of size 2.5 mm² 12 pair
3
994
2982
... More
END TERMINATIONS FOR COMMUNICATION/ FIRE ALARM CABLES.
-
-
-
... More
Supply ,Installation, testing and commissioning of Fiber Optic Patch panel (LIU) for following type & number of fiber for OFCs including all accessories for terminating, pigtails with Connectors, patch cords with connectors, Splicing sleeves and splice tray including all labour and materials as per approved drawings specifications of this tender and directions of engineer-in-Charge
-
-
-
... More
For 8 fiber Mono mode cable with LC pigtails and LC patch cords
6
14864
89184
... More
For 8 fiber Mono mode cable with LC pigtails and SC patch cords
6
14864
89184
... More
For 8 fiber Mono mode cable with LC pigtails and ST patch cords
6
14864
89184
... More
For 8 fiber Mono mode cable with SC pigtails and LC patch cords
6
14864
89184
... More
For 8 fiber Mono mode cable with SC pigtails and SC patch cords
6
14864
89184
... More
For 8 fiber Mono mode cable with SC pigtails and ST patch cords
6
14864
89184
... More
For 8 fiber Mono mode cable with ST pigtails and LC patch cords
6
14864
89184
... More
For 8 fiber Mono mode cable with ST pigtails and SC patch cords
6
14864
89184
... More
For 8 fiber Mono mode cable with ST pigtails and ST patch cords
6
14864
89184
... More
Termination of optical fiber cables for various systems including supply of all hardware, splice connectors, accessories, including all labour and materials as per approved drawings specifications of this tender and directions of engineer-in-Charge
-
-
-
... More
8 Fiber
66
3646
240636
... More
SUPPLY OF COMMUNICATION / FIRE ALALRM CABLE / CONDUITS / DUCTS
-
-
-
... More
Supply of Mono mode, jelly filled, Optical fiber cable with non metallic armour with following number of cores & construction, as per EIL standard specifications, data sheet, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
... More
8 Fiber unitube construction
24413
52
1269476
... More
Supply of HDPE ducts for laying of optical fiber cables between various substations, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge
-
-
-
... More
HDPE duct with overall dia. Upto 60mm
24413
90
2197170
... More
CIVIL WORKS/M.S. CHEQUERED PLATE
-
-
-
... More
Excavation and backfilling of trenches for cables and earth strip etc. , for a maximum depth of 1.5 m, shoring, shuttering and dewatering (if necessary) including consolidation and disposal of surplus earth up to a distance of 30 m, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. (Excavated trenchdimensions shall be measured).
-
-
-
... More
Excavation and backfilling of trenches in all types of soil except rock.
7
248
1736
... More
Supply and laying of 40 mm size gravel in one layer of 100/150 mm thick including dressing of soil surface and laying the aggregate in uniform layer and density, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in- Charge ( Aggregate will be measured in boxes of size 1.5 m x 1.5 m x 0.5 m which shall be taken as 1 cubic metre, the boxes are to be furnished by the contractor free of cost for measuringpurposes).
-
-
-
... More
40 mm size gravel.
113
1022
115486
... More
Supply and spreading of approved fine river sand/stone dust in cable trenches, including all labour and materials, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
... More
Stone dust grading Zone-II, grading limits as per IS-383.
4394
1132
4974008
... More
Supply and spreading of approved FLY ASH BRICKS - TYPE-5 of 75 mm thickness in cable trenches for cable protection, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. (Actual area of laid brick surfaces shall be measured).
-
-
-
... More
Bricks.
2619
555
1453545
... More
Providing and laying plain cement concrete for all depths below and up to a plinth level in foundations including tamping, ramming, vibrating, curing, shuttering etc. all as specified in any shape, position, thickness and finishing the top surface rough or smooth as specified and directed, including supply of all materials and all complete for concrete of M-15 grade with 20 mm and down size graded crushed stone aggregates, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
... More
Plain cement concrete.
2
3936
7872
... More
Supply, fabrication and installation of 6 mm thick M.S. chequered plate for covering floor cut- outs/cable trenches etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
... More
6 mm thick M.S. chequered plate.
66
2482
163812
... More
Supply and installation of fire proof sealing system as per IEC-60332 including supply and fabrication of steel frames and other accessories (cement, gravel, sand etc.) including drilling, cutting, welding, surface preparation, dressing/ chipping of concrete, enlargement etc. including all minor masonry and structural works and repair of all damages in line with the enclosed job specification and instructions of the Engineer-in-Charge
56
30685
1718360
... More
Making through and through cut outs in pockets of size 150 mm dia in the RCC floor/walls of trenches/buildings of thickness upto 200mm for facilitation cable entries using concrete cutting machines including all labour and materials as per approved drawings, specifications of thistender and directions of Engineer -in-charge
2
580
1160
... More
LAN SYSTEMS
-
-
-
... More
Supply, installation, connection, testing and commissioning of following ratings of 240 V, single phase, sockets/receptacles/switches as described below including all connected materials, outlet boxes and associated accessories including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.
-
-
-
... More
3 Nos 6 A, 5 pin flush/ surface mounting sockets/receptacles with 1 Nos 15 A, piano type flush/surface mounted switches.
2
518
1036
... More
3 nos 6 A, 5 pin plate type flush/ surface mounting sockets/receptacles with 1 Nos 15 A, plate type flush/surface mounted switches.
2
518
1036
... More
PAINTING & MARKING
-
-
-
... More
Letter painting and marking of all buses of switchboards, all incomers, bus couplers, outgoings with details of Tag No, feeder rating in KW/Amp, sending end source, in the front of the panels and bus bar, panel nos.etc. on the rear side of the panels for all switchboards, all other substation equipment viz.transformers, capacitors, neutral grounding resistors, VFD panels, other panels, etc for equipment housed in electrical substations including supply of all material such as stickers, enamel paints, stencil, etc including supply of all labour, materials as per the specification of this tender and directions of Engineer-in-Charge.
-
-
-
... More
Each alphabet/character upto 2 inch in height/length
3175
6
19050
... More
Each alphabet/character above 2 inch and Upto 4 inch in height/length
10269
9
92421
... More
Each alphabet/character above 4 inch and Upto 8 inch in height/length
7663
14
107282
... More
Each alphabet/character above 8 inch and Upto 12 inch in height/length
925
25
23125
... More
Letter painting of tag nos., applicable circuit nos. for identification with red/black/white paint for all outdoor equipment in safe and hazardous areas viz. light fittings, control gear boxes, lighting/power panels, welding receptacles, convenience receptacles, local control stations, fire alarm manual call points, fire alarm detectors, motors, field call stations, loud speakers, etc. including supply of enamel paint, all hardware as required, supply of all labour, materials as per the specification of this tender and directions of Engineer-in-Charge.
-
-
-
... More
Each alphabet/character upto 2 inch in height/length
2100
6
12600
... More
Each alphabet/character above 2 inch and Upto 4 inch in height/length
4850
9
43650
... More
Each alphabet/character above 4 inch and Upto 8 inch in height/length
2350
14
32900
... More
Each alphabet/character above 8 inch and Upto 12 inch in height/length
694
25
17350
... More
MV (415V) FEEDER MODIFICATION
-
-
-
... More
MCB BOX
-
-
-
... More
Modular cable duct
-
-
-
... More
Supply of modular cable duct made of Polyolefin or equivalent chemically inert material of inside width (240 mm or above), inside height (150 mm or above) in lengths of 1 meter or higher with flame retardant property and with detachable type duct cover of high mechanical strength and provision to drain accumulated water inside duct complete with all accessories required for laying of duct and other technical parameters as per drawings, specifications of tender and directions of engineer-in-charge for laying of power and communication cables.
1559
2237
3487483
... More
Laying of light weight modular cable duct made of Polyolefin or equivalent chemically inert material of inside width (240 mm or above), inside height (150 mm or above) in lengths of 1 meter or higher as per drawings, specifications of tender and directions of engineer-in-charge forlaying of power and communication cables.
1048
342
358416
... More
Supply of Manpower :
Agency to provide & mobilise following manpower as per instructions of Engineer in-charge for delivering exclusive service to B AND R . However, 2 weeks' notice shall be given for mobilisation and 1 day notice shall be given for demobilisation. Note that quoted rate of manpower deployment shall be inclusive of cost towards required PPEs, facilities ecessary for functioning at site and complience of applicable Statutory obligation e.g P.F. & ESI etc. (1 Man-Month should be considered as 30 man-days).
-
-
-
... More
DISCIPLINE ENGINEER :
-
-
-
... More
ELECTRICAL
7
30688
214816
... More
SUPERVISOR
-
-
-
... More
ELECTRICAL
7
20254
141778
... More
LICENSED ELECTRICIAN
7
20254
141778
... More
"NOTE:-
THE ABOVE RATE SHALL BE INCLUSIVE OF ALL TAXES & DUTIES, ROYALTIES, CESS, FEE, ENVIORMENTAL & POLLUTION, FITNESS & SAFETY CLEARANCE CHARGES (IF ANY), OR ANY OTHER INCIDENTAL CHARGES ETC BUT EXCLUDING GST."
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%