Bhagat Phool Singh Mahila Vishwavidyalaya Tender
If you want to inquire about any e-tender the Haryana government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Haryana tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Haryana etender you're looking for. Read further to learn how to search and bid for etender Haryana.
Costs
EMD
₹ 15,18,500Document Cost
₹ 23,600Tender Fee
₹ 1,180
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_HRY_289396_1Bid Award Id
ViewTender No
140Tender Authority
Bhagat Phool Singh Mahila Vishwavidyalaya ViewPurchaser Address
-Website
http://etenders.hry.nic.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.HSR:-5.45 + 15 mm cement plaster on the rough side of single or half brick wall of mix : 1 :4 (1 cement: 4 fine sand). HSR:- 11.6.1 .
13197.61
1992839
151
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead: HSR:- 5.29.1 Of area 3 sq. metres and below
465
56265
121
Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge (HSR-5.49)
85
1445
17
Dismantling tiled roofing with battens, boarding etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. (HSR-5.13)
1400.25
65811
47
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar ( HSR-5.7.4)
134.35
87999
655
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1: 1.5:3 or richer mix (i/c equivalent design mix) (HSR-5.23)
278.98
402010
1441
Dismantling cement conglomerate / terrazzo floors 25 mm to 50 mm manually/ by mechanical means and disposal of material within standard lead as per direction of Engineer- in-charge.(HSR-5.42)
229.42
25006
109
Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres 15 mm to 40 mm nominal bore lead as oer direction of Enaineer-in-charge: (HSR-5.55.1)
500
17000
34
Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge: Up to 150 mm diameter metre (HSR-5.56.1 )
300
30300
101
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.HSR:-5.45
2375.59
87896
37
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles above 25 mm and up to 40 mm(HSR-5.43.2)
482.89
20281
42
Dismantling Stone Spalls or Brickbats Filling Grouted with natural silt and clay (HSR-5.4.2)
16.56
3676
222
Providing and laying in position cement concrete of specifiedgrade excluding the cost of centering and shuttering - All workbelow plinth level and up to Floor IV level 1 :4: 8 ( 1 Cement : 4 coarse sand (zone-Ill) : 8 graded cum stone aggregate 40 mm nominal size) (HSR-6.1.6)
393.21
1075429
2735
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor four level, excluding the cost of centering, shuttering and finishing: 1 :2:4 (1 Cement : 2 coarse sand (zone-Ill) : 4 graded stone aggregate 20 mm nominal size) (HSR-6.2.2)
49.34
192129
3894
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement-All work up to plinth level:1 :2:4 (1 cement : 2 coarse sand (zone-Ill) : 4 graded cum stone aggregate 20 mm nominal size) (HSR -6.14.2)
12.39
53760
4339
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: HSR:- 6.1.2 1:2:4 (1 cement : 2 coarse sand (zone-Ill) : 4 graded cum stone aggregate 20 mm nominal size)
57.66
224412
3892
Brick work with common burnt clay non-modular bricks of class designation 7 .5 in superstructure above plinth level up to floor IV level in all shapes and sizes in : HSR:-7.22.2 Cement mortar 1:6 (1 cement: 6 coarse sand)
59.93
260216
4342
Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in: Cement Mortar 1:6 (1 cement: 6 coarse sand). (HSR-7.20.2)
29.56
123649
4183
Brick work with common burnt clay non-modular bricks of class designation 7 .5 in superstructure above plinth level up to floor IV level in all shapes and sizes in : (HSR-7.22.1) Cement mortar 1:4 (1 cement: 4 coarse sand)
11.87
52655
4436
Half brick masonry with common burnt clay non-modular bricks of class designation 7 .5 in superstructure above plinth level up to floor IV level.Cement mortar 1:3 (1 cement :3 coarse sand)(HSR-7.28.1)
30.19
17540
581
Providing and laying autoclaved aerated cement blocks masonry cum 472 3573 4046 with 150mrn/230mm/300 mm thick AAC blocks in super structure above plinth level up to floor IV level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-inCharge. (Thepayment of RCC band and reinforcement shall be made for separately). HSR:- 7.51
21.23
85896
4046
Dismantling wire gauze with frame work including separating frame Frame work and putting wire gauge into rolls. (old HSR-8.14)
1644.84
6414
3.9
Providing and laying brick tiles over mumty roofs, grouted with cement mortar 1 :3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement, over 12 mm layer of cement mortar 1 :3 (1 cement : 3 fine sand) and finished neat: HSR:-9.14.1 With common burnt clay non-modular brick tiles of class sqm designation 1 O
2807
1176133
419
Providing gola 75x75 mm in cement concrete 1 :2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1 :3 (1 cement : 3 fine sand) as per standard design : HSR:-9.17.1 In 75x75 mm deep chase
3299.16
412395
125
Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. HSR:-9.57.1 75 mm diameter
120
16320
136
Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. HSR:-9.57.2 110 mm diameter
2134.15
478049
224
Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. HSR:-9.57.3 150mm diameter
125
37625
301
Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 1 O mm gap for thermal expansion. HSR:-9.58.5.2 110 mm bend
270
28080
104
10 cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa @ 35 kg per cum of earth and gobri leaping with mix 1: 1 (1 clay : 1 cow dung) and covered with flat tile bricks, grouted with cement mortar 1 :3 (1 cement: 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finished neat: With common burnt clay non-modular brick tile of class designation 10 (HSR-9.11.1)
2008.56
1098682
547
Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 1 O mm gap for thermal expansion. Single tee without door 110x110x110 mm (HSR-9.58.4.2)
60
9600
160
Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm centre to centre and cross 'T' of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures,smoke detectors etc. Main 'T' runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1 .6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm centre to centre along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.GI Metal Ceiling Lay in plain Tegular edge Global white colour tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. (HSR 9.47.1)
48.77
50281
1031
Hoisting wooden battens and placing lintels and placing in position up to floor (HSR-9.5)
10
13310
1331
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make, inall colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1 :3 (1 cement : 3 coarse sand) and jointing with grey cement slurry@ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. HSR:-10.62
2536.39
1618216
638
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1 :4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. (HSR-10.60)
962.99
738613
767
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1 :4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-charge: Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. . (HSR-10.50.1)
447.74
1357099
3031
Mirror polishing on marble work/Granite work/stone work whereever reqired to give high gloss finish complete. HSR:-10.104
7141.4
2056723
288
Providing and fixing of Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 ( 1 cement : 4 coarse sand) :10.37.1 25 mm thick (HSR 10.37)
5984.3
5296105
885
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1 :4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete10.63.2 Size of Tile 600x600 mm (HSR 10.63.2)
2708.28
2992649
1105
Providing and laying of conglomerate floor 50mm thick cement concrete topping 1 :2:4 (HSR 10.7)
2797.47
676987
242
Providing and laying 60mm thick factory made cement concrete inter1ocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over (BIS 15658:2006) and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. (HSR-10.76)
1594.16
993161
623
Providing and laying Baroda Green marble stone 17mm and above thick flooring included matching the grains of marble slab in any pattern as specified laid over 12mm thick cement sand mortar 1 :3 and jointed with white slurry mixed with pigment to match the shade of marble including rubbing and polishing. The rates are for all heights / storey. The sample shall be got approved from Engineer In Charge. (HSR-10.48)
50.76
67460
1329
Providing and laying Baroda Green marble stone 17mm and above thick in risers of step, skirting , dado, pillars and wall lining included matching the grains of marble slab in any pattern as specified laid over 12mm thick cement sand mortar 1 :3 and jointed with white cement slurry mixed with pigment to match the shade of marble including rubbing and polishing. The rates are for all heights / storey. The sample shall be got approved from Engineer In Charge (HSR-10.47 )
19.64
26690
1359
Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade. HSR:-11.78
18895.59
661345
35
Providing and applying two coats white cement based putty of approved brand and manufacturer, over plastered surface and grinding the surface smooth with sand paper to get en even and smooth finish including cost and carriage of all material , labour charges, scaffolding, sundries etc. complete.HSR:-11.58
57367.24
2065220
36
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface: HSR:-11.67.1 Water thinnable cement primer
31031.01
775775
25
Distempering with 1st quality acrylic distemper, having voe (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. HSR:-11.66.2 Two coats
11571.74
358723
31
Providing and fixing of chicken wire mesh for avoiding cracks in plaster with necessary nail/screws etc. complete in all respect to the entire satisfaction of engineer-in-charge (HSR 11.17)
1000
262000
262
Pointing on tile brick work with cement mortar 1 :3 (1 cement : 3 fine sand): Flush/ Ruled/ Struck or weathered pointing (HSR-11.26.1)
7701.37
392769
51
Applying pink primer or aluminium priming coat on wood work including preparation of surface, Knotting and stopping etc (HSR 11.77)
901.77
18937
21
15 mm cement plaster on rough side of single or half brick wall of mix:1 :4 (1 cement: 4 coarse sand) (HSR-11.9.1)
668.95
76929
115
12 mm cement plaster of mix 1 :4 (1 cement: 4 fine sand) (HSR-11.5.3)
1839.27
172891
94
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including water thinnable priming coat with cement prime (HSR-11.64.1).
11508.26
575413
50
Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 litre/1 O sqm over and including priming coat of exterior primer applied @ 2.20kg/10 sqm)(HSR-11.95.1)
3024.98
296448
98
Painting over the wooden surface with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. (HSR-11.83.1)
2201.47
118879
54
Preparation of ply wood surface for painting including sand papering the surface and applying filling with approved quality filler consisting of white lead, linseed oil, varnish and chalk mitti including finishing the surface to required finish complete.(HSR-11.76)
142.27
5833
41
Providing and fixing ISi marked flush door shutters conforming to IS : 2202 (Part I) non - decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. HSR:-12.37.1 35 mm thick including ISi marked Stainless Steel butt hinges with necessary screws
676.46
1060689
1568
Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws: 35 mm thick shutters HSR :-12.19.1.2.2 Kiln seasoned and chemically treated Hollock wood.
526.29
1170995
2225
Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISi marked M.S. pressed butt hinges bright finished of required size with necessary screws.Kiln seasoned and chemically treated Hollock wood HSR:-12.10.2.1 35 mm thick
239.46
524656
2191
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick: HSR:- 12.9.8 Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture with matching wood beading
355.15
371486
1046
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick: HSR:- 12.9.7.1 Float glass panes 4 mm thick glass pane (weight not less than sqm 10kg/sqm).
114.99
123959
1078
Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately) . HSR:-12.27.1 18 mm thick
781.57
807361
1033
Providing and fixing aluminium tower bolts, ISi marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete HSR:-12.99.4 150x10 mm
375
25875
69
Providing and fixing aluminium sliding door bolts, ISi marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : HSR:-12.98.2 250x16 mm
165
33000
200
Providing and fixing aluminium handles, ISi marked, anodised (anodic coating not less than grade AC 1 O as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete 125mm ( HSR-12.102.1)
261
14355
55
Providing and fixing aluminium hanging floor door stopper, ISi marked, anodised (anodic coating not less than grade AC 1 O as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. HSR:-12.103.2 Twin rubber stopper
520
30160
58
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISi marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately.Kiln seasoned and chemically treated Hollock wood HSR:-12.7.2.1 35 mm thick shutters + Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick: HSR:-12.9.2 Kiln seasoned and chemically treated Hollock wood
52.67
164172
3117
Providing and fixing factory made 30 mm thick door shutter made of solid PVC foam profile. The styles & rails shall be of size 75 mm x 30 mm having wall thickness 5 mm. The styles, top & bottom rails shall have one side wall thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power. The styles and rails shall be reinforced with M.S. tubes of size 33 mm x 17 mmx 1 mm, painted with primer , all four comers of reinforcement to be welded or sealed. Solid PVC extruded bidding (push fit type) will be set inside the styles and the rails with a cavity, to receive single piece extruded 5mm PVC sheet as panel. The styles and rails will be mitred cut and joint with the help of PVC solvent cement & self driven self tapping screws. Single piece extruded solid PVC lock rail of size 100 mm x 30 mm with wall thickness 5 mm & 15 mm integrally extruded in the middle of the lock rail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100mm x 8 mm complete as per manufacturer's specifications and direction of Engineer-in-charge. HSR:-12.122.2 Decorative finish (both side wood grained finish)
80
231680
2896
Providing and fixing ISi marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. HSR:-12.36.1 35 mm thick including ISi marked Stainless Steel butt hinges with sqm necessary screws
81.65
218087
2671
Providing and fixing aluminium sliding door bolts, ISi marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :300x16 mm (HSR-12.98.1)
251
56475
225
Providing and fixing aluminium tower bolts, ISi marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete 50x10 mm (HSR-12.99.2)
400
37600
94
Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. 100mm( HSR-12.75.2)
200
13600
68
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS: 3564, embossed on the body, door weight up to 36 kg to 80 kg and door width from 701 mm to 1 000 mm), with double speed adjustment with necessary accessories and screws etc. complete. (HSR-12.89)
240
188400
785
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) (HSR-12.159.2) only labour rate
176.5
29652
168
Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel crews etc. complete :125x64x2.50 mm (HSR-12.74.1)
200
17000
85
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding (HSR-12.50.1)
1365
139230
102
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smoth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) (HSR-12.157.1.1)
1166.98
421279
361
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) (HSR 12.159.2)
556.13
575038
1034
Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. With 2nd class teak wood beading 62X 19 mm (HSR-12.33.1 )
1644.84
1843865
1121
Providing and fixing of roller blinds on windows complete with material and labour complete with push up & down arrangement as per approved design / colour and Engineer-in-charge. (HSR12.114)
10
22370
2237
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade I Type II, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides. HSR:-12.158.2)
462.92
408758
883
Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screw35 mm thick shutters with ISi marked M.S. pressed butt hinges bright finished of required size.(HSR-12.32.1.2)
21.85
48900
2238
Providing and fixing ISi marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters30 mm thick including ISi marked Stainless Steel butt hinges with necessary screws .(HSR-12.37.2)
59.28
89097
1503
Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISi marked M.S. pressed butt hinges bright finished of required size with necessary screws.Second class teak wood 35 mm thick .(HSR-12.10.1.2)
55.31
121184
2191
Providing and fixing ISi marked M.S. pressed butt hinges bright finished with necessary screws etc. complete125x65x2.12 mm(HSR-12.55.1)
100
3600
36
Providing and fixing aluminium handles, ISi marked, anodised (anodic coating not less than grade AC 1 O as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete 100 mm(HSR-12.102.2)
30
1440
48
Providing and fixing ISi marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:25 mm thick (for cupboard) including ISi marked nickel plated bright finished M.S. piano hinges with necessary screw(HSR-12.37.3)
27.43
40431
1474
Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete :150 mm (HSR-12.70.1)
30
720
24
Providing and fixing aluminium sliding door bolts, ISi marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :300x16 mm (HSR-12.99.3)
43
3483
81
Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws: 35 mm thick shutters HSR :-12.19.1.2.1 Second class teak wood.
5.15
17870
3470
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid separately). Kiln seasoned and chemically treated Hollock wood . HSR:-12.1.3
0.49
29248
59691
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : 12.157.1.2 For fixed portion Powder coated aluminium (minimum thickness ofpowder coating 50 micron)
1129.56
442787
392
Providing and fixing Brass 100mm mortice latch and lock with 6 levers each without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. HSR:-12.164
7
2513
359
Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineer-in-charge HSR:- 12.167.2 Powder coated minimum thickness 50 micron aluminium
14
1092
78
Providing and fixing aluminium hanging floor door stopper, ISi marked, anodised (anodic coating not less than grade AC 1 O as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. HSR:-12.103.1 Single rubber stopper
7
217
31
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 356 4, embossed on the body, door weight up to 35 kg and door width up to 7 00 mm), with necessary accessories and screws etc. complete. HSR:-12.88
7
6524
932
Providing and fixing ISi marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: HSR:-12.97 .2 125x63x4 mm
21
2100
100
Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 2.0 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 2.00 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: .Profile C HSR:- 13.3.2.1 Fixing with adjustable lugs with split end tail to each jamb
941.56
384156
408
HSR:- 13.3.3.1 Fixing with adjustable lugs with split end tail to each jamb
459.46
199405
434
Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 2.0 mm thickness,including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 2.00 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge:Profile B Fixing with adjustable lugs with split end tail to each jamb( HSR-13.3.1.1)
812.11
310226
382
Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately)rebate for 35mm door shutter (HSR-13.3.3.2)
400
171200
428
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). (HSR 13.41)
15960
7070280
443
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (HSR 13.27)
1678.75
134300
80
Removal of existing IPB by manual means and disposal of dismantled material with all lifts and up to a lead of 1000 m as per technical specification clause 202.3 HSR:-17.70
125
9500
76
Relaying of available (removed and stacked) Interlocking Paver Block Pavement having thickness 1 OOmm/80 mm/ 60 mm (average = 80mm) as per drawings and Technical Specification Clause 1504 HSR:-17.71
125
9250
74
In-filling / sealing of joint between RCC lintel cum sunshade and wall (on sqm external side) in all floors by pushing in Grout RW/equivalent in paste form and coving 20 mm x 20 mm after applying a coat of Zycosil/equivalent & Zycoprime/equivalent solution before cement plastering of top, bottom and sides of RCC sunshade.HSR:- 18.36
5541.13
155151
28
Providing and fixing SFRC MANHOLE COVERS AND FRAMES MARKED WITH IS: 12592 including setting the same to correct lines and levels in 1 :3 cement sand mortar over manhole including carriage loading unloading stacking handling re-handling etc. complete in all respects to the satisfaction to the Engineer-in-charge. HSR:- 21.93.1 Type:- Extra Heavy Duty Set (EHD-35) 560MM Clear Opening
92
118956
1293
Constructing brick masonry inspection Chamber sizes as given below up to 0.60 metre average depth in cement mortar 1 :5 lime concrete with 40 per cent lime mortar 2:3 in foundation cement concrete 1 :2:4 benching 12mm thick cement plaster 1 :2 with a floating coat of 1 mm thick of neat cement R.C.C. 1 :2:4 slab 100 mm thick/cement concrete topping, 50mmthick: with 455mmx455mm / 455mm x610mm inside light duty C.I. inspection chamber cover and frame weight as per 1.5.1. specification painted with 3 coats of black bitumastic superior paint complete as per standard design. (HSR-21.84.1)
20
78100
3905
Construction of circular standard brick-masonry manhole chambers to standard drawings on S.W. pipe sewers or other circular sewers up to the required depth in 1 :5 cement sand mortar lime concrete in bed and sides of pipe-sewer and cement concrete 1 :2:4 in benching 12 mm thick water tight 1 :2 cement sand plaster with a floating coat of neat cement and finished with two coats of sodium embedded in 1 :2 cement sand mortar complete. The rate covers the cost of carriage of C.I. manhole, frame and cover and malleable iron steps from the stores of the engineer-in-charge of the works to site of works. the rate also includes the cost of accurately planed and fitted centring supports for all works as well as for all curves and special works cleaning out their beds etc. Sodium silicate will be supplied free of cost at the stores of the Engineer-in-charge. n 300 mm internal diameter pipe sewer (HSR 21.91.5)
10
110720
11072
Constructing brick masonry inspection Chamber sizes as given below up to 0.60 metre average depth in cement mortar 1 :5 lime concrete with 40 per cent lime mortar 2:3 in foundation cement concrete 1 :2:4 benching 12mm thick cement plaster 1 :2 with a floating coat of 1 mm thick of neat cement R.C.C. 1 :2:4 slab 100 mm thick/cement concrete topping, 50mm thick: with 455mmx455mm / 455mm x610mm inside light duty C.I. inspection chamber cover and frame weight as per 1.5.1. specification painted with 3 coats of black bitumastic superior paint complete as per standard design. HSR:-21.84.3 Size 600 mm X900 mm inside (with 455 mm x 455 mm cover and frame light duty single seal weighing 20 kg with R.C.C. slab)
10
60900
6090
Providing salt glazed stone ware pipes grade 'A' in standard length of 600 mm each pipe marked with IS: 651 and their lowering, cutting, jointing and testing as described in item No. 21.38, 21.39, item 21.40 induding the cost of jointing materials as well as carriage, loading, unloading, stacking, handling, re-handling etc. complete in all respects to the satisfaction of Engineer-in-charge. HSR:-21.94.3 200mm i/d
100
26700
267
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 20 mm nominal bor HSR- 22.94.2
98
17052
174
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bor HSR- 22.103.3
105
34335
327
Providing and fixing 8 mm dia C.P. I S.S. Jet with flexible tube up to 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge. HSR-22.38
118
31860
270
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore HSR-22.106.1 Make:- Jaquar , Hindware.
300
153600
512
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore HSR-22.107.1 Make:- Jaquar , Hindware.
320
182080
569
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40 mm dia HSR-22.14.2.2
300
19200
64
Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White HSR-22.39(Make:- Century/ Hindware)
55
46255
841
Providing and fixing Unplasticised PVC connection pipe with brass unions: 45 cm length 15 mm nominal bore HSR-22.101.2.1
190
10830
57
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end): 20 mm nominal bore HSR-22.98.2
92
39560
430
Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. HSR-22.109
200
11000
55
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White vitreous chinaware Wash basin size 630x450 mm with a pair of 15 mm C. P. brass pillar taps HSR-22.1.1
38
86260
2270
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. HSR - 22.181 Make:- Sintex, Polywell, Sheetal or Equivelent
36500
292000
8
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. 25 mm dia nominal bore (HSR-22.88.3)
125
39750
318
Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. HSR:-22.209
100
91000
910
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. 20 mm dia nominal bore (HSR-22.88.2)
125
29875
239
Providing and fixing in position concealed cistern including flushing plate of approved make (to the approval of the Engineer-in-charge) complete in all respect.HSR:-22.217
14
111664
7976
Providing and fixing one piece construction white vitreous chinaware squatting plate with an integral longitudinal flushing pipe, white P.V.C. flushing cistern, with fittings, standard size G.I. / PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete, including painting of fittings and cutting and making good the walls and floors etc. wherever required HSR:-22.27.5 Range of four squatting plates with 10 litre P.V.C. automatic flushing cistern. (Make:- Jaquar, Hindware)
15
163185
10879
Providing and fixing white vitreous chinaware extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous chinaware cistern / PVC cistern (with brass fitting) into the wall with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete.HSR:-22.33
21
254184
12104
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. 15 mm dia nominal bore (HSR-22.88.1)
125
23875
191
Providing and fixing 15 mm C.P. brass laboratory cock swan neck / Sink Mixture of best quality (to the approval of Engineer-in-charge). HSR:-22.8.2 Two way (Make:- Jaquar, Hindware)
102
282744
2772
Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. HSR:-22.115.2 Waste coupling 36 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms
116
9396
81
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end): 80 mm nominal bor HSR-22.98.7
1
2119
2119
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White vitreous chinaware Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests (HSR-22.22.1)
33
129063
3911
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White vitreous chinaware Wash basin size 630x450 mm with a pair of 15 mm C. P. brass pillar taps (HSR-22.1.1)
8
18160
2270
Providing and fixing white vitreous chinaware laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : Size 600x450x200 mm (HSR-22.6.2)
11
51491
4681
Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISi : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately. (HSR-22.182)
17000
136000
8
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 15 mm nominal bore (HSR-22.103.1)
35
10185
291
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end): 32 mm nominal bore. (HSR-22.98.3)
20
10860
543
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 25 mm nominal outer dia Pipes (HSR-22.85.3)
850
221850
261
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 32 mm nominal outer dia Pipes (HSR-22.85.4)
650
226200
348
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 20 mm nominal outer dia Pipes (HSR-22.85.2)
400
81200
203
Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore (HSR-22.105.1)
55
31515
573
Providing and fixing Stainless Steel A ISi 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink with drain board 510x1040 mm bowl depth 250 mm (HSR-22.10.1.1)
13
54145
4165
Providing and fixing Unplasticised PVC connection pipe with brass unions:4cm length 15 mm nominal bore [HSR 22.101.2.2].
20
1480
74
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. . [HSR 22.15]
10
8230
823
Providing and fixing white vitreous chinaware battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge. (HSR-22.46)
2
12426
6213
Providing and fixing Unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. .(HSR-22.128.2).
20
1720
86
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal outer dia Pipes(HSR-22.86.1)
150
34500
230
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal outer dia Pipes(HSR-22.86.2)
600
177600
296
Providing and fixing gun metal gate valve with C.I. wheel of approved quality(screwed end)25 mm nominal bore(HSR-22.98.1)
10
4640
464
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end):40 mm nominal bore (HSR-22.98.4)
10
6350
635
Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design: 300 mm diameter S.W. pipe (HSR 22.165.5)
200
88400
442
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet: HSR:-22.102.2 150 mm diameter
50
8450
169
Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) 1st course of applying cement slurry @ 4.4 kg/sqm mixed with waterproofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.(ii) llnd course of 20 mm cement plaster 1 :3 (1 cement : 3 coarse sand)mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface.(iii) lllrd course of applying blown or residual bitumen applied hot at 1.7 kg.per sqm of area.(iv) lvth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen@ 1.7kg/sqm). (HSR 28.14)
1800
756000
420
Distempering with 1st quality acrylic distemper (Ready mix) having voe content less than 50 grams/ litre of approved brand and manufacture to give an even shade: HSR:-30.25.1 Old work (one or more coats)
83775.49
2680815
32
Finishing walls with Acrylic Smooth exterior paint of required shade: Old work (Two or more coat applied @ 1.67 litre/ 10 sqm) on existing cement paint surface (HSR-30.37.1)
23202.65
1647388
71
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. HSR:-30.22.
30772.07
338492
11
Renewal of old putty of Glass panes. HSR:-30.58
1833
34827
19
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade One or more coats on old work (HSR-30.28.1)
6456.45
277627
43
Finishing walls with water proofing cement paint of required shade: Old work (one or more coats applied @ 2.20 kg/1 O sqm) over priming coat of primer applied @ 0.80 litres/10 sqm complete including cost of Priming coat. (HSR-30.35.1 )
9515.39
523346
55
Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work (HSR-30.27 .1)
137.29
6452
47
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in Charge. With cement mortar 1 :4 ( 1 cement: 4 coarse sand) (HSR-30.16.2)
6683.94
1323420
198
Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 4 mm (weight not less than 1 Okg/sqm) (HSR-30.54.1)
150
95400
636
Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge. (HSR 30.18)
8692.58
8692
1
Removing white or colour wash by scrapping and sand papering sqmand preparing the surface smooth including necessary repairs to scratches etc. complete (HSR-30.21)
3616.63
28933
8
Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia up to 300mm . HSR:-30.91
1000
103000
103
Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity 0.043 W/m K as per ASTM 518:1991,in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm Including both sides) comprising of main-T runners of size 24x38 mm of length 3000 mm, cross - T of size 24x32 mm of length 1200 mm and secondary Intermediate cross-T of size 24x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm centre to centre and 40 mm long dry wall S.S screws. The work shall be carried out as per cifications, drawing and as per directions of the Engineer-in Charge. With 15 mm thick tegular edged light weight calcium silicate false ceiling tiles. (HSR- 32.42.1)
96.79
110437
1141
G.I Barbed Wire Fencing 1.2 Metre High Labour Machinery Material Providing and fixing 1.2 metres high GI barbed wire fencing with 1.8 m angle iron posts 40 mm x40 mm x 6 mm placed every 3 metres centre tocentre founded in M15 grade cement concrete,0.6 metre below ground level, every 15th post, last but one end post and comer post shall be strutted on both sides and end post on one side only and provided with 9 horizontal lines and 2 diagonals interwoven with horizontal wires, fixed with GI staples, tum buckles etc complete as per clause 807 (HSR 34.29.1)
895.66
263324
294
EPDM Gasket for uPVC window/door (HSR-B-0781)
100
1900
19
G.I. inlet connection (B-1158)
20
1200
60
S.C.I. gully or nahani grating 100 mm dia (B1120)
20
500
25
C.P. brass waste 40 mm (B1283)
20
1900
95
8 mm dia C.P. Brass/ S.S. Jet with flexible tube up to 1 metre long with S.S. each 200 triangular plate for European type W.C. (B1079)
10
2000
200
White plastic seat (solid) with lid C.P. brass hinges and rubber buffers (B1234)
10
4000
400
G.I. flush pipe and C.P. brass spreader including C.P. connecting pipe Range of four each 1430 lipped urinals (B1464)
10
14300
1430
G.I. inlet connection (B-1158)
65
3900
60
M.S. Clamp RM106
30
600
20
Providing and fixing bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete (N.S)
25
36000
1440
Providing and laying 8 mm wooden flooring, skirtting shade knowswiss complete in all respects as per satisfaction of Engineer in charge. (NS items)
83.61
106184
1270
P& F PVC Wall panneling as per specifications and satisfaction of Engineer In charge (NS)
41.8
33440
800
P& F 3mm thick DND fiber glass sheet, UV stabilized material with sheet fitting and water proofing with silicon sealant, screws etc. without welding job work complete in all respects and satisfaction of Engineer in charge. (N.S Items)
183.48
463103
2524
P& F 5mm thick DND make designer fiber glass sheet, UV stabilized material with sheet fitting and water proofing with silicon sealant, screws, sacffolding etc. without welding job work complete in all respects and satisfaction of Engineer in charge. (N.S Items)
300
1497000
4990
Finishing walls with exterior grit ready mixed product with natural stone granules (N.S. items)
668.95
193995
290
Flush valve (N.S Item)
24
15240
635
Rrplacement of double side leminated fabric 580 GSM glossy including screws, aluminium strips, cutting jointing and labour etc. complete in all respect. Make:- SRF . N.S
1060
212636
200.6
Filling silicon of jointing as per requirement at site complete in all respect.N.S
6
1770
295
NS Item- P/F SS 20mm dia hanging rod/ovalshaped heavy quality i/c SS wall clamps complete fixing in position.
50
13600
272
NS Item- Providing and fixing CP Pilar Cock etc. complete in all respect.
50
37700
754
NS Item- Providin, laying and jointing specialswith required rubber seal and solvent of PVC/SWR pipe class (type B) and ISI marked i/c filling joint solvent mixture complete in all respect.) (NS). A) 110mm dia Plain Bend
50
7550
151
NS Item-Single junction with door
25
4228
169.15
NS Item- Providing ,laying and jointing specials with required rubber seal and solvent of PVC/SWR pipe class (type B) and ISI marked i/c filling joint solvent mixture complete in all respect.) (NS). A) 110mm dia socket.
50
4350
87
NS Item- Providing,laying and jointing specials with required rubber seal and solvent of PVC/SWR pipe class (type B) and ISI marked i/c filling joint solvent mixture complete in all respect.) (NS). A) 90mm dia COWEL
25
635
25.4
NS Item-Providing, laying and jointing specials with required rubber seal and solvent Of PVC/SWR pipe class (type B) and ISI marked i/c filling joint solvent mixture complete in all respect.) (NS) A) 90mm dia SOCKET
25
441
17.65
NS item-Providing and fixing CPVC fittings of ISI Marked, Prince make, complete in all respect. Union 25mm
25
2250
90
NS Item-Providing and fixing CPVC fittings of ISI Marked, Prince make, complete in all respect. Ball Valve (Union Type) 25mm
25
5750
230
NS Item-Providing and fixing CPVC fittings of ISI Marked, Prince make, complete in all respect. Ball Valve (Union Type) 40mm
25
14675
587
NS Item-Miscellaneous petty repair of plumbing work inclusive of detection of leakage rectification T and P used cost of Dhaga, Safida etc. complete in all respect.
50
15000
300
NS Item-Miscellaneous petty repair of carpenter work inclusive of removal of doors/windows,repair work T and P used, Nails, Screws etc. complete in all respect.
200
60000
300
NS Item-Providing and Fixing CP Waste Coupling etc. complete in all respect.
200
50600
253
NS Item-Providing and Fixing Sink Coupling etc. complete in all respect
50
12650
253
NS Item-Providing and Fixing CERA SEAT COVER complete in all respect.
50
26800
536
NS Item-Providing and Fixing Face Spandle etc. complete in all respect.
50
10100
202
NS Item-Providing and Fixing Tank Nipple 1" etc. complete in all respect.
50
14150
283
NS Item-P/F PVC Tank cover complete as per NS.
200
40000
200
NS Item-Repair of PVC cistern by changing syphon etc. complete in all respect.
50
10600
212
NS Items-Jointing CPVC pipes to GI pipes by fixing MTA etc. complete in all respect.
150
28650
191
NS Items-Jointing CPVC pipes to GI pipes by fixing FTA etc. complete in all respect.
100
12200
122
NS Item-Providing and Fixing CP Flunch etc. complete in all respect. (IN EACH)
200
3000
15
NS Items - Supply and Fixing of precast Concrete Rest bench with back rest / hand rest. Each bench consists of 2 nos. base support grey cement in white colour (thickness 85 mm, Back hight 890 mm, Front height 450 mm, and Base width 690 mm) and 1 nos. reinforced concrete plank in green / red colour of size 150 mm x 400 mm x50 mm and 1 no of reinforced concrete plank in green / red colour of size 1500 mm X 425 MM X 50MM. Overall Dimensions Seating length of the Bench 1500mm, Seating height of the Bench 450mm Total height of the Bench 890 mm. Manufatured by using M-30 grade of Concrete using vibro compaction process & complete in all respect as per Engineer-In-Charge.
100
590000
5900
Providing and fixing wooden almmirah of with MDF 19mm laminated board i/c all necessary fittings etc. Complete
20
178180
8909
Supply and erection of miniature circuit Breaker/isolator 240/415 V in the existing distribution board including making necessary connections:- 6 amp. to 32 amp Single Pole HSR-23.22.5.1
697
112914
162
40 amp to 63 amp. MCB's FOUR POLE HSR -23.22.5.8
130
187980
1446
Providing and fixing Piano type accessories of approved make in existing box and Bakelite sheet including fixing and making necessary connections, complete in all respect. Ceiling rose flush/surface type HSR-23.8.1.5
1394
27880
20
Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in existing MS/PVC Conduit etc as required. 1 run of Size 1.50 Sqmm(1/1.40mm) HSR-23.5.6.1
9415
555485
59
1 run of Size 4 Sqmm(1/2.24mm) HSR-23.5.6.3
4695
572790
122
Supply and erection of PVC CONDUIT ISI marked (Medium) recessed in wall/ceiling etc. including the cost of PVC bends, inspection boxes, iron hooks and cement concrete etc. complete in all respect up to the entire satisfaction of Engineer-in-Charge of work. PVC pipe of 25 mm dia. HSR-23.7.6.2
2900
104400
36
Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. 5 amp. 1 way switch HSR-23.8.11.1
1482
68172
46
15 amp. 1 way switch HSR-23.8.11.3
305
28060
92
5 amp. Socket HSR-23.8.11.4
364
33488
92
15 amp. 6 pin Socket HSR-23.8.11.5
305
42395
139
step type Fan Regulator 2 modules 300 watt HSR-23.8.11.7
316
91008
288
Blanking plate HSR-23.8.11.10
134
2680
20
Providing and fixing Piano type accessories of approved make in existing box and Bakelite sheet including fixing and making necessary connections, complete in all respect. Bakelite angle/straight button holder large size. HSR - 23.8.1.12
724
36924
51
Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects. 1 & 2 Modules including combined plate for Telephone and data HSR-23.8.10.1
225
23400
104
4 Modules HSR-23.8.10.3
124
19468
157
8Modules HSR-23.8.10.5
164
42804
261
Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. 4 pole MCCB 200 to 250 amp HSR-23.22.1.11
4
48416
12104
Replacement of ball bearing of a ceiling fan including greasing, re-assembling and testing etc. HSR-23.15
636
60420
95
Replacement of a fan condenser complete with connections and testing etc. 2 to 3.5 mfd. HSR-23.17.1
869
48664
56
Providing and fixing Piano type accessories of approved make in existing box and Bakelite sheet including fixing and making necessary connections, complete in all respect. Switch 5 amp. on existing sheet. HSR-23.8.1.1
3120
56160
18
Wall socket 5 amp on existing sheet. HSR-23.8.1.2
910
29120
32
15 amp. switch on existing sheet. HSR-23.8.1.3
272
18496
68
6 pin 15 multi socket on existing sheet HSR-23.8.1.4
266
23408
88
Ceiling rose flush/surface type HSR-23.8.1.5
1559
31180
20
Supply and erection of suitable MS/GI Box covered with 3 mm thick Bakelite sheet as below 180 mm X 100 mm X 60 mm HSR-23.8.3.3
240
30000
125
200 mm X 150 mm X 60 mm deep metal box HSR-23.8.3.4
192
33984
177
Supply and Fixing 3 mm thick Bakelite sheet cover on existing MS/PVC junction box/tee etc including fixing with brass screws and washers. HSR-23.8.12
960
8640
9
Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. 4 pole MCCB 6 amp to 100 amp HSR-23.22.1.9
17
116705
6865
40 amp to 63 amp. Double pole HSR-23.22.5.4
96
72768
758
Providing and fixing Piano type accessories of approved make in existing box and Bakelite sheet including fixing and making necessary connections, complete in all respect. Socket size rotary step type Electronic regulator for A.C. ceiling fan HSR-23.8.1.13
1015
213150
210
Call bell 220/230 volts musical type HSR-23.8.1.6
15
1515
101
Bell Push HSR-23.8.11.6
15
1290
86
12 Modules HSR-23.8.10.6
38
12008
316
Wiring in PVC conduit system for 3-pin 15amp. Plug point by using 2 no 4 sqmm FRLS copper wire and 1 no 4 Sqmm FRLS copper wire for earthling , including providing 1 no 15/16 Amp 3/6 pin socket and 1 no 15/16 Amp switch required MS Box etc complete as required HSR-23.3.5.2 Group B
43
51127
1189
Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in PVC Conduit etc as required. 1 run of Size 1.50 Sqmm(1/1.40mm) HSR- 23.3.6.1
350
34300
98
1 run of Size 2.50 Sqmm(1.1.80mm) HSR- 23.3.6.2
300
37800
126
1 run of Size 4 Sqmm(1/2.24mm) HSR- 23.3.6.3
280
45080
161
Supply and erection of U- PVC Trunking/Channel of following size including cost of fixing on wall, floor and ceiling etc. with required material complete the job in all respect up to entire satisfaction of the Engineer-in-charge of work. 50x50 mm HSR - 23.23.5.4
830
70550
85
Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to to the entire satisfaction of the Engineer-in-Charge of the work. TPN DB Horizontal type Double Door 8 way ( 8 incoming 3phase*8 outgoing) HSR-23.22.4.7
8
35456
4432
Vertical TPN DB Double Door 4 way ( 8 incoming and 3phase*4 outgoing) HSR-23.22.4.9
3
20451
6817
TRIPLE POLE MCCB 16 to 100 Amp HSR-23.22.1.3
13
67470
5190
40 amp to 63 amp. MCB's TRIPLE POLE HSR-23.22.5.6
6
6972
1162
6 amp. to 32 amp MCB's FOUR POLE HSR-23.22.5.7
6
6114
1019
40 amp to 63 amp. MCB's FOUR POLE HSR-23.22.5.8
9
13014
1446
Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects. 6 Modules(For Misc Jobs) HSR-23.8.10.4
4
832
208
Supply and erection of M.S. angle iron frame duly welded for housing M.S. sheet & main switches etc. on it, fixed on wall by means of suitable size of rag bolts with cement concrete, duly painted with three coats of approved paint including one coat of red oxide. HSR-23.24.1
200
18800
94
Wiring only in existing conduit and MS Box for Light/Fan/call bell point in 1.5 sqmm FRLS PVC insulated copper conductor cable , without separate control switch Group A HSR - 23.5.3.1
108
17172
159
Wiring in PVC conduit system for 3-pin 15amp. Plug point by using 2 no 4 sqmm FRLS copper wire and 1 no 4 Sqmm FRLS copper wire for earthling , including providing 1 no 15/16 Amp 3/6 pin socket and 1 no 15/16 Amp switch required MS Box etc complete as required Group A HSR - 23.53.5.1
13
13338
1026
Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to to the entire satisfaction of the Engineer-in-Charge of the work. TPN DB Horizontal type Double Door 4 way ( 8 incoming and 3phase*4 outgoing) HSR - 23.22.4.5
2
6062
3031
Vertical TPN DB Double Door 4 way ( 8 incoming and 3phase*4 outgoing) HSR - 23.22.4.9
1
6817
6817
Vertical TPN DB Double Door 8 way ( 8 incoming 3phase*8 outgoing) HSR - 23.22.4.11
1
9051
9051
6 amp. to 32 amp MCB's FOUR POLE HSR- 23.22.5.7
5
5095
1019
Supply and Fixing Bakelite sheet on existing MS/GI/wooden/PVC box etc including fixing with brass screws and washers. 3 mm thick HSR - 23.8.2.2
2040
26520
13
Supply, installation, testing and commissioning of load bank with digital Meter module cost of digital Amp./ volt Meter with selector switch wiring (but EXCLUDING COST of incoming and outgoing MCCB’s) etc. suitable for operation of 240/415 volts A.C. Supply with both side cable allay, inter connection and fixing the same in existing MS pedestal/ wall complete with all labour and material required for the same up to the entire satisfaction of Engineer-in charge of work. Load Bank 4 way 250 A HSR-23.24.4.1
2
96682
48341
TRIPLE POLE MCCB 400 Amp HSR- 23.22.1.7
2
36496
18248
40 amp to 63 amp. MCB's FOUR POLE HSR- 23.22.5.8
36
52056
1446
Supply and Fixing Bakelite sheet on existing MS/GI/wooden/PVC box etc including fixing with brass screws and washers. 5 mm thick HSR- 23.8.2.1
1600
27200
17
Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in existing MS/PVC Conduit etc as required. 1 run of Size 10 Sqmm(1/3.50 mm) HSR- 23.5.6.5
120
41640
347
S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Mtr below ground level including diging and refilling of earth including cost of suitable size socket/cuppler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HDPE pipe 90/75 mm outer dia/inner dia HSR-24.5.2.4
80
14400
180
Supply and erection of GI bracket made of 32 mm dia medium class GI pipe, having 15 deg angle from horizontal, suitable for fixing on top of Street Light pole 90 cm long, with 20 cm high suitable size pole cap HSR-24.4.2
76
41344
544
Supply and erection of Single Phase weather proof M.S. box of size 20 cm x 15 cm x 10 cm with hinged cover made of 2 mm thick MS sheet, locking arrangements, housed in wall/fixed on pole , including the cost of 1 no 4 way 16 A bakellite connector, 1 no. 6 amp SP MCB and 1 Nos. 16 amp. neutral links fixed on bakellite sheet in the M.S. box including painting and necessary connections. HSR-24.4.5
16
10240
640
S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Mtr below ground level including diging and refilling of earth including cost of suitable size socket/cuppler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HDPE pipe 90/75 mm outer dia/inner dia HSR-24.5.2.4
40
7200
180
STREET LIGHT 3 Meters long 50 mm dia pole duly embeded 0.6 m below ground level. HSR-24.4.1.1
20
42800
2140
S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Mtr below ground level including diging and refilling of earth including cost of suitable size socket/cuppler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HDPE pipe 63/50 mm outer dia/inner dia HSR-24.5.2.3
50
6950
139
Earthing with G.I earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. (but without charcoal or coke and salt) as required. HSR-24.1.1
17
51799
3047
Extra for using salt and char coal/coke for pipe earth electrode as required. HSR-24.1.2
17
12410
730
Supply and erection of 20mm x 3 mm thick GI, tape fixed with suitable G.I. stapples of same size. HSR-24.1.14
100
6900
69
Supply and erection of suitable compression type brass cable glands for underground Cable :- 25 sqmm to 50 sqmm Cable 2 to 4 Core HSR-24.2.7.3
24
2064
86
Supply and erection of aluminium lugs heavy duty including crimping etc. upto the entire satisfaction of the Engineer- in-charge of the work. 35 sqmm HSR-24.2.8.6
56
672
12
50 sqmm HSR-24.2.8.7
32
544
17
Supply and erection of straight through joint (cable jointing kit) 1.1 KV grade complete with required quantity of resin, hardner, plastic mould G.P. Putty, adhesive, earth continuity, connections and fixing the same in postion complete with joint etc. - Straight through Joint. For 25 sqmm to 50 sqmm Cable 3 to 4 Core HSR-24.2.9.5
1
2682
2682
S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Mtr below ground level including diging and refilling of earth including cost of suitable size socket/cuppler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HDPE pipe 90/75 mm outer dia/inner dia HSR-24.5.2.5
200
36000
180
Providing and fixing 4.00 mm dia G1. Wire on surface or in recess for loop carthing as required. HSR-24.1.13
80
1920
24
Supply and erection of suitable compression type brass cable glands for underground Cable :- Upto 6 Sq mm cable 2 to 4 Core HSR - 24.2.7.1
58
2088
36
25 sqmm to 50 sqmm Cable 2 to 4 Core HSR - 24.2.7.3
2
172
86
Supply and erection of aluminium lugs heavy duty including crimping etc. upto the entire satisfaction of the Engineer-in-charge of the work. 4 sqmm to 6 sqmm HSR- 24.2.8.2
16
80
5
16 sqmm HSR- 24.2.8.4
16
144
9
Supply and erection of weather proof M.S. box size 20 cm * 15 cm * 10 cm covered with 3.00 mm thick M.S. sheet hinged cover, locking arrangement, housed in wall, including the cost of 1 no. 16 amp. 415 volts SPMCB and 2 no. 63 amp. 415 volts neutral links fixed on hard wood board/ 10 mm Bakelite sheet in the M.S. box including painting and necessary connections. HSR- 24.4.16
14
8442
603
Providing and fixing in position best Indian make (to the approval of the engineer-in-charge) storage type automatic electric water heater, pressure/non-pressure type thermostatically controlled, suitable for operation on 230 volts, 50 cycles single phase vertical wall mounting fitted with-draw able and adjustable type AC, thermostat. Thermostat knob to be readily accessible through the opening of suitable cover for and adjustment of temperature in the installed position of heater and the thermostat should be withdrawn without having to drain the water, electric heating element made out of copper tube (heating element should be easily removed and replaced in the installed position of heater) A neon indicator 1 AMP, inner container made out of copper tinned both from inside and outside, outer container made out of mild steel sheet finished in gleaming white stove enamel paint, insulated between the inner and outer with fibre glass wool with 1 Meter length of suitable capacity 3 core flexible cord with plug and non return valve plastic/lead connections or pressure release valve (where required). Complete including fixing and testing for a week (as required by Engineer-in- charge 50 Litres capacity Make :- RACOLD, HAVELLS & Crompton HSR-22.216.5
4
56996
14249
Supply, erection, testing of Ceiling fans IS marked (as per IS code 374) with suitable GI pipe complete in all respects complete as per directions of Engineer-in-charge 48" (1200mm) With BEE 5 Star Ratting Make :- Havells, Orient, Cromption with 3 year warranty HSR-20.71.1
260
598000
2300
Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:- Overall size 6sq.mm (2Core) Armoured (Loose) CSR - 34.10 (B)
420
32550
77.5
Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS:7098 (Part-1)1988 to be laid 1Meter below ground level including excavation, sand cushioning, covering with sand & First Class bricks and back filling the trench etc., of the required size as per PWD General Specifications:- Overall size 25sq.mm (4Core) Armoured (Underground) CSR-31.10 (A) (xxxviii)
130
57811
444.7
Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS:7098 (Part-1)1988 to be laid (On Surface) as per PWD General Specifications:- verall size 6sq.mm (2Core) Armoured (On Surface) CSR-31.10 (E)
60
5718
95.3
Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid (On Surface) as per PWD General Specifications:- Overall size 6sq.mm (2Core) Un-armoured (On-Surface) CSR-34.10 (C)
400
26680
66.7
Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS:7098 (Part-1)1988 to be laid (On Surface) as per PWD General Specifications:- Overall size 50sq.mm (4Core) Armoured (On-Surface) CSR - 34.10(xl)
160
42928
268.3
Supply and erection of MS saddle and clamps including the cost of all labour and material required to complete the job in all respect and upto entire satisfaction of the Engineer-in-charge of work. EL035
1140
22800
20
Supply and erection of Water cooler 150Ltr. / Hour 150 liters capacity, Material of water cooler body fully SS with =0.5mm thickness, Meterial of water storage tank sheet SS Grade 304 with 0.5mm thickness ISI makred IS:1475 latest Make:- USHA, Sidhwal & Blue Star.
10
476980
47698
Supply and erection of water treatment and water purification system semi automatice with extenal auto cut off UV potable water purification system , water TDS allowed to the system 1000, water purification technology UV, aavailability of sediment and activated carbon filter, filtration capacity =50Ltr. hours, Output water conforming standerd IS 10500 (latest) Make :- Kent, AD-TECK & Aquaguard
10
149530
14953
Suppy & erection of LED flood light fitting 200watt. Make Havells model no. JETAIRISMAXFL200WLED757PWBLTG, / Make Philips Model no. BVP483PLED210X2CWSWBPSUP4145 & Make Wipro Model no. LF30-272-060-57-XX with warranty 2 year &all latest updated specification complete in all respect up to the entire satisfaction of Enginner in charges of the work. (NS)
14
228900
16350
Supply, installation and testing of Slim Digital Podium with the minimum features of i5, 4GB RAM, 1 TB HDD, Windows 10, 2x 25W Speakers inbuilt, 21.5'' Touch Screen (finger & pen touch), Support Gooseneck Microphone, Wireless Mike, Central Volume Controller inbuilt, Built in Audio System, Inbuilt space for Amplifiers, Speakers & PC. High Quality 1.6mm metallic powder coated with inbuilt power sockets. Rugged body design with caster wheels make it easy to move around. Make:- Brio/Vectra/Peoplelink
2
376000
188000
Supply, installation and testing of Power Extension Board complete in all respect.
2
1000
500
Supply, Installation, Testing of Digital Wireless Speakerphone with 3 Extension Mics. Speakerphone features:- It should come up with Audio Conference microphone and Wireless Receiver. USB port or better for charging. LED indicator for batery status for charging. 6.3mm Stereo Output Port. Frequency Range of 2,400 ～ 2,483 GHz, bandwidth Efficient Modulation Format. OTA programming: Support 5 or 2 Mbps Over-the-Air Data Rate or better. Microphone coverage: Coverage range of 360-degree or better. Should have an Reverberation time of 0.5 seconds or better. Noise level 48 dBA, Audio Pickup of Up to 10 ft radial or better. Should have an Acoustic Echo Cancellation of 40dB or better. Audio Features Should have Automatic Echo Cancellation, Automatic Gain Control, Automatic Noise reduction, Automatic Non Linear Processing, Automatic Level Control, Automatic Microphone Equalizer. Humidity: It should support Non- Operating humidity ( Non Condensation) of 20-85% or better. Cascading It should supplied with 3 microphone units. Make: Peoplelink/LG
1
210000
210000
Supply, Installation, Testing of High Quality HDMI Cable complete in all respect.
100
36000
360
Supply & erection of LED batten Tube light fitting 20 watt. Make Havells, Philips, Wipro with warranty 2 year & all new latest updated specification Complete in all respect up to the entire satisfaction of Engineer - in charge of the work. NS
1913
497380
260
Supply and erection of LED Street light fitting 60watt. Make Havells, Philips, Wipro with warranty 2 year & all new latest updated specification Complete in all respect up to the entire satisfaction of Engineer - in charge of the work. NS
42
201600
4800
Supply and erection of LED Street light fitting 45watt. Make Havells, Philips, Wipro with warranty 2 year & all new latest updated specification Complete in all respect up to the entire satisfaction of Engineer - in charge of the work. NS
76
243200
3200
Full stator rewinding of ceiling fans 48'' including cleaning & insulating the stator slots, sleeving, soldering, wrapping of cotton tape, varnishing & etc. complete in all respect up to the entire satisfaction of Engineer-in-charge of the work. NS
192
67200
350
Full stator rewinding of Exhaust Fan 12'' including cleaning & insulating the stator slots, sleeving, soldering, wrapping of cotton tape, varnishing & etc. complete in all respect up to the entire satisfaction of Engineer-in-charge of the work. NS
144
79200
550
Supply and erection of MS saddle complete in all respect up to the entire satisfaction of Engineer-in-charge of the work. NS
10
2150
215
Supply and erection of heavy duty exhaust fan 9'' with double ball barring with Shutter ( Louver ) Aluminium Body make Crompton, havells, Orient with (Warranty 2 year) complete in all respect up to the entire satisfaction of Engineer-in charges of the work. NS
96
268800
2800
Supply and erection of heavy duty exhaust fan 12'' with double ball barring with Shutter ( Louver ) Aluminium Body make Crompton, havells, Orient with (Warranty 2 year) in all respect up to the entire satisfaction of Engineer-in charges of the work. NS
86
309600
3600
Supply and erection of LED bulb 18watt. Make Havells, Philips & Wipro with warranty 2 year Complete in all respect up to the entire satisfaction of Engineer- in-charge of the work. NS
34
8840
260
Supply and erection of Decorative dome 16'' round light heavy material polycarbonate lights with fix in wall complete in all respect up to the entire satisfaction of Engineer-in-charge of the work. NS
34
122400
3600
Supply and erection of PVC /XLPE insulated (Heavy Duty) electrical cable for working voltage up to and including 1100Volts to IS 1554 (Part –I) 1988/7098 (Part-I) with aluminum conductor – ISI mark laying of underground cable in pipe / existing open / closed trench etc. including transportation, loading and unloading etc. complete in all respect. i) 35 Sq.mm 3.5 core cable (Ard.)
105
30135
287
Supply and erection of PVC /XLPE insulated (Heavy Duty) electrical cable for working voltage up to and including 1100Volts to IS 1554 (Part –I) 1988/7098 (Part-I) with aluminum conductor – ISI mark laying of underground cable in pipe / existing open / closed trench etc. including transportation, loading and unloading etc. complete in all respect. 50 Sq.mm 3.5 core cable (Ard.)
200
68800
344
Supply and erection of Extension computer board (4+4) 4switch + 4 socket Make Cona, Havells, Anchor
85
45900
540
Supply & erection of LED false ceiling light (2x2) 36 watt. Make Havells Model no. PLANO2X2PLR36WLED 857S / Make Philips Model no. RC420BMLED34S6500PSDWH & Make Wipro Model no. CRC010R036HP57HEG2 with warranty 2 year & all latest updated specification complete in all respect up to the entire satisfaction of Engieer in Charges of the work. (NS)
156
499200
3200
Supply of Master Console with the features of Micro Controller Based Digital Technology, 32 Character 02 Line LCD Display, 24 Key membrane keypad, Slot provided to support up to 16 GB SD Card, Input Supply 220V AC, 50Hz, Single Phase, Power Consumption in Stand By mode Up to 06 Watt, Power Consumption during operating mode 10 to 15 Watt as per Volume, Speaker Loudness On 100% volume at Source 90- 110db , Cabinet Powder Coated Sheet MS Body, Speaker Volume Control Rotary Knob , Microphone Jack Standard 6.35mm, External Audio in Jack Standard 3.5mm, System should have Upto 200 speakers in 99 Zones, Comes in capacities of 10, 20, 30, 40, 60, 80 and 99 zones, User Can initaite a call from Master Control to any zone and have two way communciation in Half Duplex Mode. Since Each speaker has builtin microphone so one can have a talk back experiance with master control. Each speaker is programmed with a unique address, so master can dial that particular address to initate a call. Master can initiate a commom annoucement to all the zones together. User can make 5 groups of 10 zones Each to make a common annoucement in various group of speakers. 3.5mm Aux Jack is available to Play user choice music through laptop, mobile, computer etc. 6.35mm standard Jack is available on master control to connect any desired microphone, be it be table tap, gooseneck, wireless, wired etc. Speakers comes with builtin microphone. System comes with integrated Scheduling feature. User can program the whole schedule of the day and bells/prerecorded messages will ring automatically. Bell Sounds can be MP3 files to be uplaoded in Micro SD card. etc. Make:- Ahuja/SuperSync/Bosch
1
98000
98000
Supply of Speaker Unit with the features of Technology used Micro Controller Based Digital Technology, Input Supply 220V AC, 50Hz, Single Phase, Power Consumption in Stand By mode Approx 1 Watt., Power Consumption during operating mode 08 to 10 Watt as per Volume, Speaker Loudness On 100% volume at Source 125-130db, Cabinet Powder Coated Sheet MS Body, Speaker 04 Inches 10 Watt, Microphone Built in Condenser Mic, Speaker Volume Control Rotary Knob , Connection Terminals, Push fit type etc. Make:- Ahuja/SuperSync/Bosch
75
262500
3500
Supply of 18'' PA Gooseneck Microphone with the features of Frequency Response 100-15,000Hz, Impedance 1000Ω, Sensitivity 7mV/Pa, Power Source 3V-9V DC. It is suitable for various PA applications such as on Lecterns and Podiums, Open Conferences etc. The sleek and slender design makes the microphones unobtrusive & base has a female XLR connector for directly mounting the gooseneck microphone and a male XLR socket at the rear for connecting standard microphone cable to the amplifier. On/Off switch provided. Special electronic circuitry for minimal switch noise. Heavy weight housing with anti-skid feet ensures stability. Make:- Ahuja/SuperSync/Bosch
1
7800
7800
Supply of Indoor 20/30 Watt Wall Speaker with the features of Weather resistant — for use under roof eaves. Foam layer to protect speakers from dust. Array of speakers radiate forward sound beam for wider audience coverage. Speaker connections through a terminal strip at the rear. Available in 100V line matching transformer version and low impedance version. Make:- Ahuja/SuperSync/Bosch
36
158400
4400
Supply of 250 watts High Wattage PA Mixer Amplifier with the features of Speaker Output 4Ω, 8Ω, 70V & 100V, Frequency Response 50-15,000Hz ±3dB, Support 6 Mic & 2 Aux Inputs. Built-in MP3 player with remote control for USB, SD/MMC card reader & Bluetooth feature. Preamplifier and Line Output for connecting to a Booster Amplifier and for recording the programme. Instant transfer to DC power (Car Battery) if AC power fails.Make:- Ahuja/SuperSync/Bosch
1
24524
24524
Supply of Base Terminal One way for Indoor speaker capacity 25 watts complete in all respect to support the speakers Make:- Ahuja/SuperSync/Bosch
36
143820
3995
Supply & laying of 2 core 1.5 sq. mm Speaker copper cable Make:- Usha/Tekson/Deepcab
4000
240000
60
Supply & laying of 2 Core 4mm Electrical Armoured Copper cable Make:- Usha/Deepcab/Havells/Polycab
50
8000
160
Supply & laying of 3 core 1.5 sq. mm Shielded cable Make:- Usha/Tekson/Deepcab/Polycab
4000
240000
60
Supply and laying of PVC Batten/ Pipe size 25/32mm
1500
48000
32
Supply and erection of PVC Batten/ Pipe size 50 mm
300
27000
90
Supply of Big Size Equipment Rack with Cable Manager, Power extension Board and Cooling Exhaust for Amplifiers. Make:- Rackom/Comrack/D-Link
1
42000
42000
Installation, Testing & Cabling Charges
1
120000
120000
Supply , Installation , Testing and Commissioning of 4MP Fixed Starlight IR Bullet Camera with the minimum features of Image Sensor 1/2.7” CMOS, Signal System PAL/NTSC, Min Illumination Color: 0.002Lux@ (F1.6, ACG ON), B/W: 0Lux with IR, Shutter Time 1s to 1/100,000s, Day & Night Dual IR Cut Filter with Auto Switch, Wide Dynamic Range 120dB, Focus 4mm, Lens Mount M12 Aperture F1.6, Fixed FOV Horizontal field, IR LEDS 2, IR Range Up to 50m, Video Compression IH+265/H.265/H.264, Max. Resolution 2560x1440, Built-in Mic, Operating Conditions -30o C~60oC, Audio Compression G.711/G.711U/ADPCM, Audio Bit Rate 8K~48Kbps, IP67, Privacy Mask 4 regions, Smart Defog, POE etc. complete in all respect upto entire satisfaction Engineer in charge of works. Make:- MobotiX/Bosch/Pelco/Impact by Honeywell
12
83400
6950
Supply , Installation , Testing and Commissioning of 4MP Fixed Starlight IR Dome Camera with the minimum features of Image Sensor 1/2.7” CMOS, Signal System PAL/NTSC, Min Illumination Color: 0.002Lux@ (F2.0, ACG ON), B/W: 0Lux with IR, Shutter Time 1s to 1/100,000s, Day & Night Dual IR Cut Filter with Auto Switch, Wide Dynamic Range 120dB, Focus 2.8mm, Lens Mount M12 Aperture F1.6, Fixed FOV Horizontal field of view 103.4° ; Vertical field of view: 58.1°, IR LEDS 1, IR Range Up to 30m, Video Compression IH+265/H.265/H.264, Max. Resolution 2560x1440, Built-in Mic, Operating Conditions -30o C~60oC, Audio Compression G.711/G.711U/ADPCM, Audio Bit Rate 8K~48Kbps, IP66, Privacy Mask 4 regions, Smart Defog, POE etc. complete in all respect upto entire satisfaction Engineer in charge of works. Make:- MobotiX/Bosch/Pelco/Impact by Honeywell
20
137000
6850
Supply , Installation , Testing and commissioning of 80 Ch NVR with the features of Max Resolution 12MP, Support 8 SATA interfaces for 8 HDDs, capacity upto Up to 10TB for Each HDD, HDMI Video output at up to 4K (3840 × 2160) resolution, IH+265 compression effectively, Support HDMI and VGA simultaneous output, Support TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, I GMP, QoS, IPV4, IPV6, Multicast, ARP, UDP, SNMP, SSL, Telnet, RTMP, NFS, System Compatibility ONVIF (PROFILE S/T), Alarm In/Out 16/4, 2 self-adaptive 10/100/1000 Mbps network interfaces, Bandwidth Income 320Mbps; Outgoing 320Mbps, Two-way Audio Input 1-ch, 3.5mm etc. complete in all respect upto entire satisfaction Engineer in charge of works. Make:- MobotiX/Bosch/Pelco/Impact by Honeywell
1
158000
158000
Supply , Installation , Testing and commissioning of Gang Box size 5x5 for CCTV Camera complete in all respect upto entire satisfaction Engineer in charge of works.
30
9000
300
Supply , Installation , Testing and commissioning of Hard Disk 6TB with complete in all respect upto the entire satisfaction of the in charge of the work. Make:- WD/Seagate
2
41600
20800
Supply Installation Testing & Commissioning of 4 Pair CAT 6 UTP Cable complete in all respect upto entire satisfaction Engineer in charge of works.Make: D-link/Digisol/Schinder
1480
59200
40
Supply Installation Testing & Commissioning of 16 Port 10/100/1000 Mbps POE powered Networking switch for camera's complete in all respect upto entire satisfaction Engineer in charge of works. Make : D-link/ AT/Extreme / Cisco / HP
4
76000
19000
Supply Installation Testing & Commissioning of 55" LED Monitor, 4K, HDMI Port, 20 Watts Output, 4K Display Resolution etc. Make: Panasonic/Samsung/LG/ Sony
3
247500
82500
Supply, installation, testing & commissioning of Wall mounted 4U enclosure/ Equipment Rack with complete in all respect upto entire satisfaction Engineer in charge of works. Make: COMRACK/D-Link/Rackom
4
11800
2950
Supply Installation Testing & Commissioning of 3 Core Power Cable 1.5 sqmm. Make: Finolex/Polycab/Havells/Usha
550
33000
60
Supply and erection of PVC conduit pipe ISI marked (Medium) recessed on wall/ ceiling etc. i/c cost of PVC bends, inspection box and all other material reqd to complete the job in all respect to the entire satisfaction of Engineer-in-Charge of work. a) 32 mm Dia
200
7200
36
Supply Installation ,Testing & Commissioning of High Quality 4K HDMi Cable with 10 - 15 Mtrs. length complete in all respect upto the entire satisfaction of the in charge of the work.
1
4350
4350
Supply , Installation , Testing and commissioning of Wireless mouse with complete in all respect upto the entire satisfaction of the in charge of the work. Make:- HP/DELL/INTEX/LOGITECH
1
550
550
Supply , Installation , Testing and commissioning of 2 KVA online UPS with 3 Batteries with 1 hour backup complete in all respect upto the entire satisfaction of the in charge of the work. Make:- Microtek/Luminous/APC/Eaton
1
78000
78000
Supply & erection of LED batten Tube light fitting 36 watt. Wipro equivalent Havells, Philips , with 2 year warranty Complete in all respect up to the entire satisfaction of Engineer - in charge of the work. NS
85
55250
650
Supply and erection of LED flood light fitting 120 watt. Colour temperature 6000K, Wipro, Havells, Philips, with 2 year warranty Complete in all respect up to the entire satisfaction of Engineer - incharge of the work. NS
4
41996
10499
Supply and erection of heavy duty exhaust fan 18'' with double ball barring make Crompton, havells, Orient with (Warranty 2 year) in all respect up to the entire satisfaction of Engineer-in charges of the work. NS
2
10800
5400
Supply, Installation & Testing of CHAIRMAN UNIT with the minimu features of Microphone -63dBV/µbar (7.5mV/Pa), Current Consumption 50mA Max., Mic Auto Switch-Off Time 75 seconds approx., Input Line, Output Line, Headphone, Speaker Max Input 300mW, Controls Priority Switch, Talk Switch, Speaker Volume Control, Headphone Volume Control etc. Chairman unit has a TALK switch with LED. It also has a PRIORITY switch with LED. When priority switch is pressed, a chime tone is generated to seek attention and mute the active delegate microphones etc. Complete in all Respect upto the entire satisfaction of the in charge of the work. Make Ahuja/Bosch/Tannoy
1
15000
15000
Supply, Installation & Testing of Delegate Unit with the minimum features of Microphone -63dBV/µbar (7.5mV/Pa), Current Consumption 50mA Max., Mic Auto Switch-Off Time 75 seconds approx., Input Line, Output Line, Headphone Speaker, Max Input 300mW, Controls, Talk Switch, Speaker Volume Control, Headphone Volume Control. Each unit is provided with a long gooseneck condenser microphone which is highly sensitive and unidirectional. The microphone is provided with a diffused LED housing to provide positive visual identification of the unit in operation. The built-in speaker in Each unit provides clear and crisp sound reinforcement. The output level of the speaker can be adjusted through a recessed volume control in the unit. Each unit has a headphone output, TALK switch and a TALK LED. The MIC LEVEL LED in the delegate unit flickers to indicate microphone input signal level.Ahuja/Bosch/ Tannoy
10
130800
13080
Supply & Installation of 50 Watts Central Mixer Amplifier with the minimum features of Line Output 1 17.5V DC/3A Max.; -34dBV (20mV), Line Output 2 17.5V DC/3A Max.; -34dBV (20mV), Power Output 50W RMS at 2% THD, 90W Max., Inputs 3×Mic 0.65mV/4.7kΩ, 1×Aux 100mV/470kΩ, Frequency Response 60-14,000Hz (± 3dB), S/N Ratio 60dB, Tone Controls Bass: -10dB at 100Hz, Treble: -10dB at 10kHz, Preamp Output 200mV/600Ω, Line Output 1V/1kΩ, Send Output 200mV/600Ω, Return Input 200mV/10kΩ, Speaker Output 4Ω, 8Ω, 16Ω, 70V & 100V, Power Requirement AC: 220-240V, 50/60Hz, DC: 24V (2×12V Car Battery), Power Consumption 250VA, Protections AC Fuse 1×3 Amp , DC Fuse 2×10 Amp.. Make: Ahuja/Bosch/Tannoy
1
42480
42480
Supply & Installation of 8 Core PVC Cable With connector 2.5 for fix fitting under table chairman / Del. Unit complete in all respect. Make:- Ahuja/Tannoy/Bosch
10
10320
1032
Supply & Installation of Junction/Connector boxfor fix fitting under table chairman / Del. Unit complete in all respect. Make:- Ahuja/Tannoy/Bosch
10
11500
1150
Supply & Installation of 10 Watts Ceiling/Wall speaker with the features of Power Taps On 100V 10/5/2.5W, Impedance 1k/2k/4kΩ, Frequency Response 60-15,000Hz, SPL at 1kHz (1W/1m) 92dB. 15.24 cm (6”) Full Range Speaker with power taps of 10/5/2.5W. 10 Watts continuous power handling capacity. Easy mounting with spring loaded wing clamps. 100V operation with easy selection of power taps through a terminal block. Make Ahuja/Tannoy /BOSCH
6
21456
3576
Supply & Installation of 250 watts High Wattage PA Mixer Amplifier with the features of Speaker Output 4Ω, 8Ω, 70V & 100V, Frequency Response 50-15,000Hz ±3dB, Support 6 Mic & 2 Aux Inputs. Built-in MP3 player with remote control for USB, SD/MMC card reader & BT feature. Preamplifier and Line Output for connecting to a Booster Amplifier and for recording the programme. Instant transfer to DC power (Car Battery) if AC power fails. Make Ahuja/Tannoy /BOSCH
1
38160
38160
Supply & Installation of Elegant & affordable high performance dual channel handheld wireless microphone available in eight pairs of frequencies. Two handheld dynamic transmitters, Each operating on 2 × 1.5V AA pencil cells. Receiver operates on 12V DC through an AC adaptor. Separate volume control for both channels on the front panel of the receiver. Make Ahuja/Tannoy /BOSCH
1
15300
15300
Supply , installation, testing of Composite Audio Cable multi Stranded 2 Core double insulated. complete on all respect. Make: -CHETAN/DEEPCAB/Usha/Tekson
80
5520
69
Supply, Installation, Testing of 4 Pair CAT 6 UTP Cable complete in all respect. Make:- D-Link/Molex/Schneider
90
3420
38
Supply, installation, testing of 22U Equipment Rack for AV products with Cable Manager, Power extension Board and Cooling Exhaust fan. Make: Rackom/ Comrack/Valrack
1
23760
23760
Supply, installation, testing of HDMI cable in existing pipe/ channel connectors at both ends complete in all respect. Make / Extron / Linetek/ Krammer/ Data Cables
100
35400
354
Supply, Installation, Testing of HDMI splitter 8 incoming + 1 outgoing complete in all respect. Make Extron / Linetek/Krammer
1
59000
59000
Supply, Installation, Testing of HDMI splitter 1 incoming + 4 outgoing complete in all respect. Make Extron / Linetek/Krammer
1
38000
38000
Supply, Installation, Testing of VGA splitter 1 incoming + 4 outgoing complete in all respect. Make Extron / Linetek/Krammer/Custom
1
9800
9800
Supply, Installation, Testing of 24 Port Networking Switch 10/100 Mbps complete in all respect. Make Cisco/HP/D-Link/Juniper
1
29760
29760
Supply, Installation, Testing of Multimedia 3,800 Lumens XGA Business Projector with minimum features of Native Resolution: 1024x768, Light Source: Lamp, Lamp Watt: 190W, Image size: 30" - 300", Optical Zoom: 1.1x, Support Ports Audio in/out, HDMI, Dual VGA, Mini USB Port, Kensington® Lock Slot, RS232 support complete in all respect. Make LG/Barco/Viewsonic/Casio
1
59400
59400
Supply, Installation, Testing of Imported Motorized Projector Screen 6*8 upto the complete satisfaction of the work Make: Suvira/ Liberty/Winger
1
19440
19440
Supply, Installation, Testing of Projector Ceiling Mount Kit upto the complete satisfaction of the work Make: Suvira/ Liberty/Winger
1
3600
3600
Supply, Installation, Testing of Hydroulic Desk top Plug Connection Panel having 1 nos network ports, 1 no. RGB port, 1 no. 5 amp AC socket, 1 no. audio port and 1 no. HDMi port complete on all respect . Make Linetek/ Canara/ RANZ/Data Cables
7
94920
13560
Supply and erection of PVC pipe25mm dia ISI marked ( Medium ) on ceiling etc. including the cost of PVC bends , inspection boxes , iron hooks etc. with complete in all respect upto the entire satisfaction of Engineer-in-charge of work Make: AKG/Kalinga / Ravindra/ Diplast/Poly
50
2100
42
Supply, installation, testing of VGA cable complete in all respect. Make: Extron / Linetek/ Data Cables
50
14400
288
Supply, installation, testing of 3 core Multistrand 1.5sqmm annealed copper conductor Power cable in existing pipe / channel I/C connection etc. Make:- Finolex/Havell/ Polycab
60
3780
63
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements