Bhagat Phool Singh Mahila Vishwavidyalaya Tender

Supply and election of Goodridge Almirante type M.S. pedestal made of 50 mm *50 mm * 6 mm angle Iron frame with 3.00 mm thick M.S. sheet covering including shutters with suitable hinges and looking arrangement with the Godrich type handle including round bars. The to covering should have a downward overhang of 75 mm on all sides of pedestal, having two sets of water proof ventilation holes of suitable size on the sides, at top and bottom, each set containing four No’s. holes to discharge the heat produced by suitable size to make it water proof . The pedestal duly painted both inside and outside with two coats of approved paint and primary coat and its legs are embedded upto the entire depth in 1:2:4 cement concrete block, projected 75 mm all around the pedestal and 200 mm above the ground level including the cost of all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in charge of the work .M.S. pedestal of size 600 mm wide, 750 mm high, 300 mm deep and bottom totally open , duly embedded in cement concrete block of size 900 mm*450 mm*200 mm above ground level , having a base of size 900 mm* 600 mm* 250 mm below ground level. (HSR-23.27.1)

Providing and fixing 4.00 mm dia G1. Wire on surface or in recess for loop carthing as required. HSR - 24.1.13

Supply and erection of 20mm x 3 mm thick GI, tape fixed with suitable G.I. stapples of same size. HSR - 24.1.14

Extra for using salt and char coal/coke for pipe earth electrode as required. HSR - 24.1.2

Supply and erection of suitable compression type brass cable glands for underground Cable 240 sqmm Cable 3 to 3.5 Core HSR - 24.2.7.7

Supply and erection of aluminium lugs heavy duty including crimping etc. upto the entire satisfaction of the Engineer- in-charge of the work. 240 sqmm HSR - 24.2.8.14

Supply and erection of stay set complete (galvanised) with 19/20mm dia x1.8 metres long stay rod, anchor plate of size 45 cm x 45 cm x 7.5mm, thimble, stay clamps, turn buckle (20mm x 60cm), 7 / 4.00mm dia G.I stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 gradet stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. DSR-12.1

Supply of 100mm dia G.I pipe (Medium Class) DSR -2834

Supply and erection of pre-stressed cement concrete pole of suitable length with a given planting depth confirming to IS-1678/ 1960/1978 below ground level in excavated pit of suitable dimensions complete in all respect as approved by Engineer-in-charge at site PCC Pole Overall Length 11 metre, Planting depth 1.80 metre, W/L 400 kg CSR-34.32

Supply of MS Angle 50x50x6mm (DHBVN - 2.4)

Supply of MS Clamps / Flat 50 x 6 complete in all respect , upto entire satisfaction of engineer in charge. (DHBVN - 3.3)

S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Mtr below ground level including diging and refilling of earth including cost of suitable size socket/cuppler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HDPE pipe 120/105 mm outer dia/ inner dia (HSR-24.5.2.5)

Supply of G.I.Nut and bolts (DHBVN- 15.3)

Supply of cleats 5 hole for Routing of LT PVC Cables to be mounted on PCC poles (DHBVN-56.6)

Supply of SS cable ties releaseable ARC for dia 250 mm , comlplete in all respect , upto entire satisfaction of engineer in charge. (DHBVN- 63 b)

Erection of MS Angle 50x50x6mm (DHBVN - Sub head (K) 2.3)

Erection of MS Clamps / Flat 50x6 complete in all respect , upto entire satisfaction of engineer in charge. (DHBVN - 3.2)

Erection of Lightering Arrestor 9 KV, 5KA (DHBVN - 8.1)

Erection of G.I.Nut and bolts (DHBVN- 10.1)

Erection of SS cable ties releaseable ARC for dia 250 mm , complete in all respect , upto entire satisfaction of engineer in charge. (DHBVN- New addition 13 (ii))

Supply and erection of MS flat 25x6x450mm long complete in all respect upto entire satisfaction of Engineer incharge of work. (NS)

Supply and erection of10mmx 75mm, Alloy steel, Hexagonal Head fastners bolt with nut and plain washer, bolt with nut for erection of cable tray along with wall horizontally complete in all respect upto entire satisfaction of Engineer incharge of work. (NS)

Supply laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and serced cable 1100volts grade 240sq.mm, 3.5core Ard. as per IS 7098 (Part-1) 1988 to be laid loose in the existing trench or pipe complete in all respect up to entire Satisfaction of Engineer incharge of work. Make RR, Havells & Polycab (NS)

Supply of Hot Dip Galvanized octagonal pole of 3mm thickness, with base plate including cost of nut and bolts , earthing studs, Integral Cable termination arrangement 5 mm thick Bakelite base plate on suitable welded MS/GI bracket 32 A four way connector 2 no 10 A SP MCB , end cover and all accessories as supplied by the manufacture 7 Mtr Long pole with top dia 75 0mm and bottom dia 150 mm with base plate of size 300 x 300 x 20 mm HSR-24.4.4.8.5

EARTHING AND LIGHTENING ARRESTOR Earthing with GL earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. (but without charcoal or coke and salt) as required. HSR-24.1.1

Extra for using salt and char coal/coke for pipe earth electrode as required. HSR-24.1.2

Providing and fixing 4.00 mm dia G1. Wire on surface or in recess for loop carthing as required. HSR-24.1.13

Supply and erection of GI bracket made of 32 mm dia medium class GI pipe, having 15 deg angle from horizontal,suitable for fixing on top of Street Light pole 150 cm long, with 30 cm high suitable size pole cap HSR - 24.4.2.4

S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Mtr below ground level including diging and refilling of earth including cost of suitable size socket/cuppler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HDPE pipe 40/32 mm outer dia/ inner dia HSR-24.5.2.1

Supply and erection of suitable compression type brass cable glands for underground Cable :- Upto 6 Sq mm cable 2 to 4 Core HSR-24.2.7.1

Supply and erection of copper lugs including crimping etc. entire satisfaction of Engineer-in- Charge of the work. 6 sqmm HSR- 24.2.6.4

Supplying, installation, Testing & commissioning of LED street light fitting 45 watt. Make Havells model no. ENDURASUNDOWNSL45WLED765 PASYBOPC or equivalent make Philips & Wipro Complete in all respect up to the entire satisfaction of Engineer - incharge of the work. NS

Supply and erection of PVC /XLPE insulated (Heavy Duty) electrical cable for working voltage up to and including 1100Volts to IS 1554 (Part –I) 1988/7098 (Part-I) with aluminium conductor – ISI mark laying and fixing of cable on surface / cable tray etc. as required, including transportation, loading and unloading etc. complete in all respect. 06 Sq.mm 2core cable (Ard.) NS