Archaeological Survey Of India Tender

Coarse Sand

Belgiri

Mollases

Gond

Cement

Stone agg. 40mm nominal size

Stone agg. 20mm nominal size

R.R. Stone

Stone Slab 40mm thick

Providing and fixing of M.S. gate at stairs of main structure of Jal mahal with MS grill panel 0.80m length and 2.30m height having M.S. angle iron frame size (50x50x6)mm with 16mm sq bars 10cm c/c. including labour and material etc. complete.

Providing and fixing of M.S. gate at Panchkuia side of (Size 2no.x2x1.15x1.50mt and 1no.x2x2.20x1.50mt) 50x50x6 mm angle iron frame with 12mm square bar spacing 10cm c/c with pointed tips and fixed with MS Channel including labour and material etc. complete

Providing and fixing of M.S. gate at boundary wall with panel 1.80 length and 2.20m height having 50x50x6mm M.S. angle iron frame 16mm sq bars 10cm c/c/ with pointed tips including labour and material etc. complete

Providing and applying two or more coat of synthetic enamel paint of approved brand and quality to give an even shade including a coat of primer after scrapping of rusted old pant surface.

Providing and installation of 63mm dia pole 6 mtr height including 1mtr depth below ground level with solar street light 6o watt LED Power with solar panel and LED luminary with built in lithium ion battery (LifePO4) and inbuilt motion sensor for movement tracking with all necessary fittings and the separated design of the solar panel and lamp body etc. complete.

Providing and fixing of 100mm thick Red sand stone (Matching stone) bench size 1.50x0.60x0.45 mtr with two vertical support stone with moulding etc complete

Supply and installation at site of readymade Dustbins of Red Sand Stone of Cylindrical shape in single block having tope molding and depression as per design on extra surface fully open top and outer top dia 580mm and height 750mm of required shape and design including providing inner bins of hard PVC of removal nature to insert under the red sand stone dustbin of size 580mm dia and 750mm height etc. complete

Supply and fixing retro reflective over head signage boards (Both sides) made up of 2mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type-III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC:67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts and nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat and fixing with two vertical 65mm dia (4.5 mm thickness) M.S. rounded pipe and frame 25x25 mm (3.2mm Thickness) square pipe with labour and material etc. complete.

Providing and fixing portable container cabin for watch and ward staff (guard room) in ferrocement material in size of 3.10mx3.10m and height 2.60m with base frame (bottom) 125x65mm C channel of 5mm thickness, cross frame (stiffener bottom) 75x40mm square pipe 1.6mm thick, top rail 60x60mm square pipe 1.6mm thick, Corner post 100x100mm, outside wall/paneling and roof 1.2mm MS corrugated sheet 18gauge, internal wall paneling 6mm pre laminate MDF Play, flooring 19mm thcik MR grade water proof wooden ply with 1.2mm vinyl carpet fitted with screw on pipe, 50mm insulation of glass wool, Aluminium sliding window size 0.75x0.75m with safety grill, Entry main door size 2.10x0.90m, four heavy locks upon corner of container attached with pillar for loading-unloading purpose, Electric fittings-Kalinga wires, 2LED tubelight, 2 Fans, One MCB box, one bulkhead light outside container, 6amp Socket, Switch and power point as per requirement, one 16Amp switch and socket, one office desk size 1.20x0.90mtr, fully of enamel paint outside of container as per selected colour by site incharge, Exterior elevation ACP Sheet at Front side including loading-unloading, transportation charges and proper fixing at site.