Western Railway Tender

... More
The WR has issued a formal invitation for competitive bids for the Western Railway project, for Part Supply Of Material, Installation, Testing & Commissioning Of Signalling Material In Connection With Replacement Of Outdoor Signaling Gears At Bilimora & Bhilad Station Of Mumbai Division Western Railway. in Valsad, Gujarat, with an estimated contract value of Rs. 3,02,98,338. The bid opening date for this tender is 22-10-2026 and the last date for bid submission is 18-11-2026. Interested bidders for Western Railway tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.

Western Railway - WR Tender - Gujarat Tender

Opening Date22 Oct 2026
Closing Soon18 Nov 2026
Tender Amount₹ 3,02,98,338.03 
Notes
Download

Costs

Description

Part Supply Of Material, Installation, Testing & Commissioning Of Signalling Material In Connection With Replacement Of Outdoor Signaling Gears At Bilimora & Bhilad Station Of Mumbai Division Western Railway.

AI Insights

Unlock AI Insights for this Tender

Sign in to request AI-powered insights, eligibility criteria and automated analysis for this tender.

Contact

Unlock the Tender details

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

Unlock the Tender details
... More
Providing brick masonry in ratio 1:6 cement and mortar including plastering with 1:4 20 cement and sand mixture both sides, 20 mm thick each with contractor's owned class II bricks, including excavation, curing, grouting, bolting etc. wherever required. Bricks sand and cement to be supplied by the contractor.(Bhilad:-5 & Billimora:-5)

10

2061

20613.6

... More
Double Walled Corrugated(DWC) HDPE Pipe with associated collars etc. as per RDSO SpecificationNo.RDSO/SPN/204/2011or latest anti-rodent & anti-oxidant and non flamepropagating 24 type in 6 metersstraightlength and of size120 mm outer die,&103.5mm inner dia. (The manufacturers,suppliers must produce valid ISlicenseandshould be certified underISO9000 and shall submitcopy of certificate).One of the followingcoupling arrangements should alsobe supplied with each pipe asper the siterequirement. 1)Suitable snap fit couplerwithrubber 'O-Ring 2)Spacers 3)Tees 4)Bend, 5) End-cap(The total quantity ofabove items is equal to no. of pipessupplied.) DWC pipe shall be marked atevery 1 mtr lengthin such a way that manufacturer's name, vender name and year of manufacture can beeasily identified.(Bhilad:-20 & Billimora:-20)

40

1912

76488

... More
Removal of rails.(Bhilad:-25 & Billimora:-25)

-

-

56

... More
Offset brackets for Main Signal, made of tubular steel, outer diameter 140 mm, thickness of pipe 4.5 mm. horizontal length of pipe 545 mm & vertical length of pipe 324 mm with fixing arrangement on Main Signal post as per Drawing No SW/554/G/R.(Bhilad:-4 & Billimora:-4)

8

4439

35514.24

... More
Excavation and casting of foundation for main signal post as per CSTE 6294 (WR) 6 with contractor's own material, including cement and anchor colt of standard size. The required scafolding ferma etc. for casting of the foundation is to be brought by the contractor with his own cost. (Bhilad:-14 & Billimora:-13)

27

8437

227808.18

... More
SS Location box is made of Spl Grade SS 304 of sizeas per drg. No.DRM/SG/945 (Half app.Case). Manufacturer'scertificate in regard tograde of stainless steeland test report shall besubmitted at the time ofsupply. Note:-(1)Enclosedshould be made of 1.6mm & door made of 2mm thick SS 304 sheet.(2)SS 20 mm (rod) X 100mm (height) male femalehinges for moving doorsmoothly. (3)SS 16 mmRod fix handle for boththe door. (4)SS sheetstiffner (0.8 to 1 mmthickness) for strengthenthe door both side. (5) SShook (6 mm rod) to beprovided on both doorsfor keeping the door openposition. Stoppers to beprovided for both doors.(6)E-type lockingarrangement (W11) forboth door and lifting hook(5X150 mm) 02 Nos (7)SS sheet 250 mm x 17 450mm for half location boxprovision of any writingwork at front side dooretc. (8) Provision ofswitch board for locationlight fitted with one twopin holder, One three pinsocket (female) and twopiano type switches of 6Afor location boxes withinternal wiring 2.5 sq.mm flexible copper wires,Holders ,socket andswitch should be of ISImark. (9)Indian Railwayproperty tag is providedon two side with followingdetails, Sr. No, Manufacturing firm name& year of Manufacturing.(10)White enamel paintshall be provided insidelocation box. (11)SSangle frame 30 mm x 30mm x 5 mm is providedalong with location box.(12)Earth GI clamp 5 mmx 50 mm flat is providingto location at two ends toconnection earth GI patti.(13)All hardware used inlocation box for mountingarrangements shall be ofSS (nuts, bolts, washersetc). (14)Suitable locationbox Hylam fabrication toprovide the clear space ofwriting to 18 cm to 20cm. (15) Packing eachlocation box to beshipped using wrapping plastic sheet around location box. (Bhilad:-15 & Billimora:-15)

30

51998

1559940

... More
Supply & Fixing of Protective screen of expanded metal 12SWG of Size 1200 X 1500 mm on Signaling as per standard practice for protecting against voltage in AC Traction area as per instruction of Engineer Incharge.

10

4520

45203.1

... More
Supply and Installation of White Zink plated MS channel of size 100x50x1.2mtr.long along with fixing Hardware. (Bhilad:-50 & Billimora:-50)

100

1518

151830

... More
Fabrication and xing of Signal Number Plate (CSTEDrg No CSTE/6186) All material 5 required for this work shall be supplied by Contractor. Material used for number plate should be comply to the specication ETI/OHE/33A (12/97) Rev-8. CSTE drawing to be followed for dimentions only.(Bhilad:-14 & Billimora:-13)

27

615

16620.93

... More
Fixing of Electrical Point Machine on the extended sleepers at points as per std. practice and as per RDSO Drg No. SA 91 51-52 or 9710 or 9161 as per section of rails used. Item includes fixing switch extension bracket, providing insulation for switch extension bracket, fixing ground connection, adjusting opening of the switches and adjusting the point machine with crank handle. The item also includes : (i) Complete material for installation like ground-connections, switch extension brackets, point insulation material, I pipes, wiring materials, various fixing nuts & bolts including castle nuts, spring washers (ii) All smithy & fitting works required at site for complete 16 installation. (iii) Installation of gauge tie plate & providing insulation for gauge tie plate (Insulation in William Stretcher Bar will be Provide by Railways). (iv) Wiring inside the point machine, insertion and termination of tail cable in point machine and junction boxes / location box /cable hut as per extent practice on WR and the instruction of Railway Engineer at site. (v) Supply and fixing of suitable size GI pipes with flange for taking cable into point machine. Note ; The ground connections shall be suitable to the Point Machines as specified by Engineer-in-charge and shall be suitable to the point lay out i.e. 60 Kg. / 52 Kg / 90R as per yard layout. Electrical Point Machine and M-6 / Screw less terminals will be supplied by Railways / covered in Schedule separately.(Bhilad:-18 & Billimora:- 20)

38

22354

849472.14

... More
Dismantling of Concrete foundation/ DemolishingRCC/CC/Stone work /CuttingTar/ 24 carpentering/ CC Flooring/Precast concrete slab/ Brick work including leading the debrisinside Railway limit or outsideRailway limit as directed by site in charge. This work to be done by contactors with his own vehicle and labour.(Bhilad:-10 & Billimora:-10)

20

605

12108.2

... More
Excavation and Casting of foundation for Shunt Signal as per Drg. No. CSTE/6090 with 11 Contractor's own materials including Cement and Anchor Bolts of Standard Size. The required scaffolding, Ferma etc. for Casting of foundation will have to be brought by the Contractor at his own cost.(Bhilad:-10 & Billimora:-8)

18

6139

110515.68

... More
Releasing of Existing Panel, Power Equipments, relays and relay racks, CT racks, Batteries etc.as per the instructions of RlyEngineer at site & their transportation to nominated depot. This work to be done by contactors with his own vehicle and labour.(Bhilad:-1 & Billimora:-1)

2

14762

29525.46

... More
Painting of two coats of synthetic enamel paint over one coat of primer on the following after scraping & cleaning surface wherever necessary with contractor's own supply of 18 paints. Wherever required contractor shall apply coating of epoxy paint also as per instructions of site-in-charge. Epoxy paint will be supplied by Railways. NOTE: - The paint and primer should be from Asian Paints/ Nerolac / Dulux / Berger. The primer / enamel paints (Aluminum synthetic, black enamel, brilliant white and yellow) will be as per (IS 5660 of 1970) / (IS 2932 of 1974).Track Lead Junction Box. (Black enamel outside only).(Bhilad:-120 & Billimora:-160)

280

65

18418.4

... More
Fixing of ARA Terminals /Screw less connectors and fuse blocks on phenolic 36 laminated sheets and fixing by stainless steel/brass nuts & bolts. This includes provision of two additional holes on the board on either side for cable conductor entry. (Bhilad:-9000 & Billimora:- 9000)

18000

22

409500

... More
Supply of Standard Tools set.(Bhilad:-1 & Billimora:-1)

-

-

34

... More
Adjustable Track Feed Resistance disc type 30 ohms as per RDSO Drg. No. SA 20166/M (Adv.) with latest amendments (with Phenolic molded base).(Bhilad:-34 & Billimora:-41)

75

978

73384.5

... More
Supply of Point Motor for 110VDC with 400v AC immunity as per IRSS:37/82.(Bhilad:- 8 & Billimora:-10)

18

18882

339888.24

... More
Installation of Maintenance Free Earth Electrode for Maintenance Free Earth spec of RDSO/SPN/197/2008. (Bhilad:-59 & Billimora:-58)

117

1456

170444.43

... More
Horizontal direction drilling/boring without damage of surface road using Auger Machine. The bore shall be 150 mm Dia & shall be done at the depth of minimum 1200 mm from the 45 ground level. The ground level shall be considered ignoring the bank height of the bank of the road. The length of the bore shall be minimum 4 Mtr long. The HDD with or without HDPE pipe as per direction of Engineer In charge.Note: HDPE pipe supply is taken as separate item. This item also includes cable laying (HDD boring). (Bhilad:-700 & Billimora:-700)

1400

1187

1662990

... More
Digging of cable pit (min2x2x1m) as per instruction of Site Engineer, supplying and 46 filling of sand before and after coiling the cables, covering top of the cable pit with stones and providing brick masonry on all four sides of the cable pit and plastering thereafter.(Bhilad:-1 & Billimora:-1)

2

12567

25135.66

... More
Supply of Digital Insulation Tester 100V/250V/500V range of Model Rishinsu 20 Make :RISHABH or MECO or Similar.(Bhilad:-1 & Billimora:-1)

2

8240

16480.8

... More
HRC fuses block complete with 2A/4A/6A fuse link as per IS 9224/79.(Bhilad:-34 & Billimora:-41)

75

70

5292

... More
Erection of Position Light Shunt signal with Base, Post, and Signal unit. Wiring & Fixing of Number Plate .The work shall be done as per instructions of Rly engineer at site.(Bhilad:-10 & Billimora:-8)

18

4169

75048.66

... More
Correspondence Test of Signalling Gears (Points, Signals, Track Circuits, ICC, BPAC etc.) during Rolling Block /Disconnections/ NI Note: Contactor/Firm should provide sufficient Manpower with Workable tools & Equipments. (Bhilad:-45 & Billimora:-46) (Per Gear consider as Nos)

91

1269

115479

... More
IS 13410: Glass Reinforced Polyester Sheet Moulding Compounds (SMC) Size of Sheet : 1000x1000x8.(Bhilad:-45 & Billimora:-45)

90

5388

484980.3

... More
Installation of Apparatus Cases with miniature 'E' type lock on CC foundation. This includes filling of location foundations with river bed sand and plastering on top of the sand. 'E' Type lock will be provided by Railway.Single Case (Bhilad:-30 & Billimora:-30)

60

1076

64577.4

... More
Channel Pins MS (Galvanized) single groove, 7 mm suitable for 4mm Dia bonding wire as per spec No IRS S 17 & RDSO Drg No. S-69/M. (Bhilad:-500 & Billimora:-500)

1000

6

6040

... More
Lettering / Numbering Termination particulars, equipments names etc., legibly and neatly inside location boxes. This includes supply of paints of Asian Paints/ Nerolac / Dulux / Berger make. Full Case.(Bhilad:-30 & Billimora:-30)

60

129

7755.6

... More
2 Aspect LED Signal Housing made ofSS-304 (Min 1.6mm thick) duly powdercoated in black, with backgroundplates, prewiring for LED Signals,Terminal strip, Reflective strips on rearside, 4 ventilation and Pole Mounting &locking attachment, suitable for REarea. The design shall confirm to IP-54as per unit description as Width260mm, Depth 200mm, Height 650mmas per Drawing No.- DRM/SG/1021(2A) of STAINLESS STEEL (SS-304) 2ASPECT COLOR LIGHT LED SIGNALUNIT (Bhilad:-7 & Billimora:-6)

13

25877

336401

... More
Main Signal Post Tubular 140 mm Dia, 5.6Mtr Length as per IRS: S-6/81 or Latest &RDSO Drg. No. SA-24625 (Advance). (ALLMS PARTS HOT DIP GALVANIZED -100MICRON) (Bhilad:-14 & Billimora:-13)

27

21240

573480

... More
Supply of Signalling Rapid Joint UV resistance cable jointing system with two half separated enclosure tapered at both ends filled with cross linked polymer and highly robust 51 insulating plastic case class -2 joint . The joint shall be as per RDSO draft specs no. RDSO/SPN/TC/101/2012, the jointing kit suitable for signalling cable Size 6 x 1.5, 12 x 1.5, 19 x 1.5 , 30 x 1.5 mm2.Note: The joint made by rapid jointing kit for signalling cable will be temporary. (Bhilad:-4 & Billimora:-4)

8

11200

89600

... More
Painting of two coats of synthetic enamel paint over one coat of primer on the following after scraping & cleaning surface wherever necessary with contractor's own supply of paints. Wherever required contractor shall apply coating of epoxy paint also as per instructions of 19 site-in-charge. Epoxy paint will be supplied by Railways. NOTE: - The paint and primer should be from Asian Paints/ Nerolac / Dulux / Berger. The primer / enamel paints (Aluminum synthetic, black enamel, brilliant white and yellow) will be as per (IS 5660 of 1970) / (IS 2932 of 1974).Point Machine with ground connections complete (Point Machine with Black enamel only outside and ground connections with Red Oxide).(Bhilad:-18 & Billimora:-20)

38

112

4277.28

... More
ARA Terminal blocks with links made of PBT Spec No.s/75/2006 (Rev - 2) with latest amendments and RDSO Drg.No.SA-23741A Alt.4.(Bhilad:-9000 & Billimora:-9000)

18000

75

1350000

... More
Pad locks Godrej make, Hardened NavTal 7 lever, 65mm Dia with common key or similar product having same feature & technical data.(Bhilad:-26 & Billimora:-26)

52

196

10233.08

... More
Fixing of Calling-on Signal/A-Sign/AG-Sign unit on signal post. The item includes fixing 10 ofCo- On signal /'A' sign/ 'AG'sign unit on signal post with bracket, hood etc. Item includes supply bracket & fixing materials etc. by the contactor. The item also includes termination of cables & wiring inside Co- On signal /'A' sign/'AG' sign unit as per standard practice.Note: This Item must be operated individually, Not to be operated in Installation/Erection of CLS.(Bhilad:-8 & Billimora:-10)

18

2391

43048.08

... More
Fixing & wiring of QNA1 / QNA1K relays for GPR Circuit in apparatus case as per Standard practice. Fixing and wiring material shall be supplied by the contactor.(Bhilad:-61 & Billimora:-72)

133

366

48755.14

... More
Shifting & Termination of Signaling cables in S&T gears. It involves disconnection of Old main cable and connection of new main cable (during shifting /NI/Pre-NI). Shunt Signal (Bhilad:- 12 & Billimora:-13)

25

370

9250

... More
Relay, AC Immune, Plug-in-type, style "QNA1K" ACI DC Neutral line, 24V DC 1000 15 Ohms 6F.6B contacts, front contacts metal to carbon and back contacts metal to carbon. Complete with plug board, retaining clip and connectors confirming to IRS: S34, IRS: S23, BRS931A. As per RDSO Specification No. STS/E/Relays/UEA (PI) Dt.30/05/97. Annexure II. The interlocking pin code CDEKY.(Bhilad:-61 & Billimora:-72)

133

5525

734825

... More
Professional AC/DC clamp meter 3 3⁄4 digit, true RMS measurement, For Measurement 33 of DC/AC currents up to 1000A, Voltage up to 600V, resistance up to 40 M, and frequency up to 1 MHz with a set of leads & carrying case. Model - DCM39A or equivalent/ higher make Motwane/Stanley/Fluke/Megger.(Bhilad:-1 & Billimora:-1)

2

12853

25707.18

... More
Excavation and Casting of Apparatus Case foundation with contractor's own materials 27 including cement and anchor bolts of standard size. The required scaffolding Ferma etc. for Casting of foundation will have to be brought by the contractor at his own cost.Single Case as per Drg No SK 748 or CSTE/5074 or SS Location (Bhilad:-30 & Billimora:-30)

60

7162

429757.8

... More
Installation of DC track circuits covering points zones also. The item includes provision of continuity bonds of seven strand PVC jacketed wire/ GI wire 8 SWG on rail joints after drilling bond-hole of 7.0/7.1/7.2mm Dia (double bond with sleeves and rail clips are to be provided at each rail joint), insertion of insulated block joint, fixing of Track lead Junction box on MS angle two numbers of size 40X40X5 mm 1200 mm length for track feed/ jumper / track relay ends of track CCTs (as per double TLJB arrangements) and also for fixing jumper cables as per insulation diagram 60 WR Drg No. CSTE/6055 and standard practice, making rail connections through suitable insulated sleeves from Track lead Junction box at TF, jumper & TR end with seven strand PVC jacketed wire /GI wire 8 SWG, rail clips for fixing bond wire on the TLJB as per standard practice, termination of tail cables on bootleg terminals etc. TF/TR wiring shall be fixed on the suitable arrangement on PRC sleepers with the help of hooks. Hooks shall be provided on PRC sleepers with the help of suitable steel bracket. This item also includes fixing & supply of channel pins etc. The item also includes supply of MS angles/ trestles, GI wire 8 SWG / seven strand PVC jacketed wire, hooks, rail clips etc. (Bhilad:-34 & Billimora:-41)

75

7328

549654

... More
Fixing of Junction type Route Indication 1-Way/2-Way/3-Wayon the top of the signal post.(Bhilad:-2 & Billimora:-4)

6

738

4431

... More
Junction route indicator unit 2 way as per Drg. No. RDSO SA 23402is suitable for LED Signal Lighting Units & as IRS: S-66/84 amndt-1or latest. (Bhilad:-1 & Billimora:-1)

2

20990

41981.52

... More
Low maintenance Lead acid secondary cell 2V/80 AH (Track feed Battery), shelf mounting type conforming to IRS:S- 88/2004 or latest.(Bhilad:-102 & Billimora:-123)

225

2213

498107.25

... More
Supply of SS 304 Troughing with cover of size 150x300x 2.5 mtrs. long and 1.0 mm Thk. Along with fixing clamp and necessary Hardware. (Bhilad:-50 & Billimora:-50)

100

3886

388620

... More
Half Round RCC pipes & collars of 150 mm internal dia (1 meter long) along with collars as per IS No. 458/2003 of NP type. Tenderer shall submit inspection/test report before supply for priorapproval by Engineer in charge. (Bhilad:-500 & Billimora:-500)

1000

159

159000

... More
Track feed battery chargers, 110V AC input, 2 to 6/10 V DC Output; as per Specn.No.IRS.S 89/ 2013 with latest amendments. Charger shall be suitable for charging 80 AH battery.(Bhilad:-34 & Billimora:-41)

75

3523

264245.25

... More
Earthwork in filling in embankment, guide bunds, around buried type abutments, 22 bridge gaps, trolley refuges, rain bunds if provided, platforms etc. with earth excavated from outside railway boundary entirely arranged by the contractor at his own cost as per RDSO's latest guidelines and specifications and special condition of contract including all leads, royalty, lifts, ascents, descents, crossing of nallahs or any other obstructions. The rates shall include all dressing of bank to final profile, demarcation and setting out of profile, site clearance, removing of shrubs, roots of vegetation growth, heavy grass, benching of existing slope of old bank, all handling/re-handling. Taxes, Octroi and royalty etc. as a complete job. Cut trees shall be property of railways and to be deposited in the railway godown unless specified otherwise in the Special conditions of contract. (Bhilad:-5 & Billimora:-5)

10

154

1545.1

... More
Junction route indicator unit 1way as per Drg. No. RDSO SA 23401suitable for LED Signal Lighting Unit & as IRS: S-66/84 amndt-1orlatest. (Supply of LED Unit is not covered in this item).(Bhilad:-1 & Billimora:-2)

3

21050

63151.56

... More
Supply of Digital Earth Resistance tester three terminal type with LED display, 1999 count, KOICO model 5600 or any reputed make approved by engineer in-charge.(Bhilad:-1 & Billimora:-1)

2

13356

26713.68

... More
Digital low current clamp meter to measure current leaks (parasitic draw down to 1 31 mA) and electric loads from 1mA to 100 Amp AC/DC, Voltages from 0 to 600V AC/DC, small jaw size to measure current in signalling circuit, 4 digit display. Make -Fluke, GTC/KEW, Scope or superior with better specification as mentioned with all accessories like test lead, batteries and carrying case, sample may be got approved from consignee before supply.(Bhilad:-1 & Billimora:-1)

2

18194

36388.68

... More
Miniature,Plug in type, M to C,AC immunized, DC biased Track Relay, 2F-2B contacts, style QBAT-9 ohms. Code ABEJX Spec:- RDSO/SPN/84 Ver. 2 : IRS -S@ 45"44@IRS-S-23, IRS-S@ 45<45@ 78.(Bhilad:-10 & Billimora:-12)

22

5393

118660.96

... More
4 Aspect LED Signal Housing made ofSS-304 (Min 1.6 mm thick) dulypowder coated in black, withbackground plates, prewiring for LEDSignals, Terminal strip, Reflective stripson rear side, ventilation, Pole Mounting& locking attachment, suitable for REarea . The design shall confirm to IP-54as per unit description as Width260mm, Depth 200mm, Height1100mm as per Drawing No.- DRM/SG/1021 (4A) of STAINLESSSTEEL (SS-304) 4 ASPECT COLORLIGHT LED SIGNAL UNIT (Bhilad:-7 & Billimora:-7)

-

-

5

... More
Digital Multimeter of Fluke 287 Industrial, True RMS with temperature, Analog bar graph, Digital display, Backlight, 1000V AC/DC, measure up to 10A, 20A for up to 30 seconds or Superior.(Bhilad:-1 & Billimora:-1)

2

78421

156842

... More
Supply of Fiber/ SMC/FRP/RCC Earth Chamber. (Bhilad:-59 & Billimora:-58)

-

-

39

... More
Fabrication and fixing of 'A' Marker (Drg No. CSTE/6180), 'AG' Marker (Drg No. CSTE/6181), 'P' Marker (Drg No. CSTE/6182), Arrow Marker (Drg No. CSTE/6183), 'G' Marker (Drg No. CSTE/6184), 'C' Marker (Drg No. CSTE/6185). Marker disk on signals as per standard practice All material required for this work shall be supplied by Contractor.(Bhilad:-8 & Billimora:-7)

15

1280

19212.3

... More
Cement concrete work for miscellaneous items in the ratio 1: 3: 6. Item includes excavation, ramming, curing and plastering with cement & sand mixture (aggregate not exceeding 3.8 cm.) (Aggregate cement & sand to be supplied by the contractor). (Bhilad:-10 & Billimora:-10)

20

6259

125180

... More
CI Base (As per IRS S-10 & RDSO Drg. No. 2011/M With latestassembly).2. Pinnacle.3. 2 Ladder Assembly, as per RDSO Drg. No.SA-23156, with Base, Ladder Guards, Platform, Front MaintenancePlatform, MS Supporting bracket to Support Ladder.4. Signal FrontStaging Complete Assembly for CLS Unit.5.Signal back staging asper extent WR Practice.(Bhilad:-14 & Billimora:-13)

27

3251

87785.91

... More
Charging of Lead Acid Batteries (2V 80AH) with contractors' own battery grade 61 sulphuric acid and distilled water with a minimum of two charge-discharge cycles, installation of charged batteries in groups & their connection & wiring. The work shall be done as per the extant practice of W.Rly & instruction of the Engineer-in-charge. Detailed measurements of initial charging shall be recorded jointly by the contractor & Rly's site-in-charge.(Bhilad:-102 & Billimora:-123)

225

376

84622.5

... More
Painting of two coats of synthetic enamel paint over one coat of primer on the following after scraping & cleaning surface wherever necessary with contractor's own supply of paints. Wherever required contractor shall apply coating of epoxy paint also as per instructions of 17 site-in-charge. Epoxy paint will be supplied by Railways. NOTE: - The paint and primer should be from Asian Paints/ Nerolac / Dulux / Berger. The primer / enamel paints (Aluminum synthetic, black enamel, brilliant white and yellow) will be as per (IS 5660 of 1970) / (IS 2932 of 1974).Shunt signal post with signal unit, surface base as per Western Railway's Standard Practice.(Bhilad:-12 & Billimora:-13)

25

231

5775

... More
Digging of cable trench 0.3 Mtr. Deep and 0.3 Mtr. Wide on Asphalted Platform / Road / Hard rocky area. Refilling with earth leveling of trenches & restoring the original surface of trenches.(Bhilad:-40 & Billimora:-40)

80

512

41020.8

... More
Lettering / Numbering Termination particulars, equipments names etc., legibly and neatly inside location boxes. This includes supply of paints of Asian Paints/ Nerolac / Dulux / Berger make. Half Case.(Bhilad:-15 & Billimora:-15)

30

88

2645.4

... More
Miniature, Plug in Type, M to C,DC Neutral ,Track relay, ACI, Style QTA2, 9 Ohm, 2F- 1B contact,Code - FGHKX Spec : BRS :939-A & 966 (Appx-F2) & IRS : S-23, S-23,S-34 & 60.(Bhilad:-24 & Billimora:-31)

55

4878

268339.5

... More
2 Amps capacity self resetting fuse madeof Polymeric Positive Coefficient (PPTC)material in thin clip.(Bhilad:-204 & Billimora:-246)

450

10

4689

... More
Hydrometer, Exide make or similar for measuring the specific gravity of Battery Graded acid with mounting stand in location Boxes. (Bhilad:-1 & Billimora:-1)

2

282

564.92

... More
Round head type non deteriorating type low voltage cartridge fuse as per Spec No IRS/S/78/92 with latest amendments 2A/4A/6A capacity. (Bhilad:-306 & Billimora:-369)

675

57

38616.75

... More
Cutting of Hard rock in trenches /Preparation of cable way/Chase 150mm wide at the bottom and 300 mm deep in hard rock (Drg prepared by contactor & approved by Engineer In charge) for laying of S&T cables where minimum required depth not possible & which is verified and 44 agreed by Engineer In charge of the work or his representative shall be made as per Drg. No RE/S&T/ALD/SK/301/85. Refilling of the same with concrete mixture of 1:3:6 from top of the cable way/ chase. Payment of concrete will be made separately through a separate item in the schedule of work.(Bhilad:-10 & Billimora:-10)

20

438

8774.6

... More
Maintenance Free Earth Electrode of length 3m, including supply of 3 bags of Earth enhancement material for earthling (10KGs/bag) for each electrode & other accessories as per Drg. 22 No. SDO / RDSO/ E&B/001 and RDSO Spec No. RDSO / SPN/197/2008. This item includes the following items: (a) Copper bonded steel earth electrode of 3.0 meter long & 17.2 mm dia with Cu-bonding thickness of min 250 micron - 1 no. (b) Earth-enhancing compound (10 Kg/Bag) - 3 No. (c) Cu-strip 200 X 25 X 6 mm to terminate earth rod = 1no. (d) Cu-strip 300 X 25 X 6 mm (MEEB) = 1 no. (e) Cu- strip 150 X 25 X 6 mm (SEEB) = 1 no. (Bhilad:-59 & Billimora:-58)

117

10403

1217151

... More
Erection of Position Light shunt signal on Offset bracket on main signal.(Bhilad:-2 & Billimora:-5)

7

1930

13510

... More
Erection of CLS Post with base and signal unit on top or on OFF set Bracket, fixing of front and back staging, ladder and guards, signal name plates / boards if any with contractor's own brackets and fixing materials. This also includes erection of auxiliary signals like calling on, shunt 8 signal if any. The work shall be done as per instructions of Rly engineer at site. It also includes provision & fixing of maintenance platform as per design given by Engineer -In-Charge at site. It also includes supply of padlock for signal units and cable termination box. X' arms to be provided by the contractor till the signals are introduced. The Item includes cutting of Signal post if required by Site In charge. 2/3/4 aspect signal unit mounted on offset bracket with junction type route indicator 1/2/3 or multilamp lamp route indicators mounted on signal post.(Bhilad:-7 & Billimora:-4)

11

3059

33656.48

... More
SS Location box made of Spl Grade SS 304 of sizeas per drg.No.DRM/SG/948 (Single app. Case).The manufacturer's certificatein regard to grade ofstainless steel and testreport be submitted atthe time of supply. Note:(1)Enclosure should bemade of 1.6 mm & doormade of 2 mm thick SS304 sheet. (2)SS 20 mm(rod) X 100 mm (height)male female hinges formoving door smoothly.(3)SS 16 mm Rod fixhandle for both the door.(4)SS sheet stiffner (0.8to 1 mm thickness) tostrengthen the door bothside. (5) SS hook (6 mmrod) to be provided onboth doors for keepingthe door open position.Stoppers to be providedfor both doors. (6)E-typelocking arrangement(W11) for both door andlifting hook (5X150 mm)02 Nos (7) SS sheet 450mm x 650 mm for fulllocation box provision ofany writing work at frontside door etc. (8)Provision of switch boardfor location light fittedwith one two pin holder,One three pin socket(female) and two pianotype switches of 6A forlocation boxes withinternal wiring 2.5 sq.mm flexible copper wires,Holders ,socket andswitch should be of ISImark. (9)Indian Railwayproperty tag is to be provided on two side withfollowing details, Sr. No,Manufacturing firm name& year of Manufacturing.(10)White enamel paintshall be provided insidelocation box. (11)SSangle frame 30 mm x 30mm x 5 mm is providedalong with location box. (12)Earth GI clamp 5 mmx 50 mm flat is providingto location at two ends toconnection earth GI patti. (13)All hardware used inlocation box for mountingarrangements shall be ofSS (nuts, bolts, washersetc). (14)Suitable locationbox Hylam fabrication toprovide the clear space ofwriting to 18 cm to 20 cm(15) Packing eachlocation box to beshipped using wrappingplastic sheet aroundlocation box.(Bhilad:-30 & Billimora:-30)

-

-

16

... More
Fabrication and fixing of hylum / SMC sheet in location box by providing all fixtures as 31 per Railway Drawing including fixing of PVC coated string rods at the back side for cable support with contractor's own materials. The work shall be done as per Drg and arrangement similar to SK 783-1/2. With latest alterations & as per instructions of Rly engineer at site.Note: SMC sheet will be taken in place of phenolic laminated sheet.Single Case (Bhilad:-30 & Billimora:-30)

60

2445

146721.6

... More
Choke Coil for Single Rail Track Circuit on 25 KV 50 Hz AC Electrified Section as per Spec No IRS S 65/1983 with latest amendments. (Bhilad:-34 & Billimora:-41)

75

2129

159714.75

... More
Fabrication and fixing of Hylum / SMC sheet in location box by providing all fixtures 32 as per Railway Drawing including fixing of PVC coated string rods at the back side for cable support with contractor's own materials. The work shall be done as per Drg and arrangement similar to SK 783-1/2. With latest alterations & as per instructions of Rly engineer at site.Note: SMC sheet will be taken in place of phenolic laminated sheet.Half Case (Bhilad:-15 & Billimora:-15)

30

777

23333.4

... More
Preparation of Cable Route Plan of buried S & T Cables using Radio Detector 8200 GS 4 or Similar model GPS Model,DGSP and Drone for Per Trench per Km. For existing cables as per the instruction of Engineer in-charge. Submission of Drone Report in Hard Copy 1 set and DGPS output in KMZ File format.In Yard Section (Bhilad:-3 & Billimora:-3)(Per trech Km consider as Km)

6

60413

362478

... More
Miniature, Plug in Type, DC Neutral ,Line Relay QSPA1, 24V DC, Slow to Pick up AC Immunized, 12F-4B/8F-4B Contact, Code ABDEJ Spec:BRS:933A ; IRS S 34 ; IRS S 23;IRS S 60-78. (Bhilad:-34 & Billimora:-41)

75

5421

406605

... More
GI wire 8 SWG (4mm Dia) suitable for track circuit rail bonding.(Bhilad:-50 & Billimora:-50)

100

68

6817

... More
Junction route indicator unit 3 ways as per Drg. No. RDSO SA 23403is suitable for LED Signal Lighting Units & as IRS: S-66/84 amndt-1or latest. (Supply of LED Units is not covered in this item).(Bhilad:-0 & Billimora:-1)

1

28167

28167.55

... More
Inkjet Colour Computer Printers for A3 Scanner A3,Print A3.(Bhilad:-1 & Billimora:-1)

-

-

35

... More
Supply of final Cable Route Plan as per laid cable duly measured at every 30m clearly 2 indicating distance of laid cable from fixed point of reference & indicating all track crossings and tail cables in original tracing along with Auto CAD in Pen Drive and Six set copies after approval.(Bhilad:- 1 & Billimora:-1)

2

1580

3160

... More
Calling ON Signal Unit with Brackets & Fixing accessories. CallingOn Signal Unit shall conform to RDSO Drg no 24351(Adv.) Alt1suitable to LED Signal Lighting Unit.(Bhilad:-8 & Billimora:- 10)

18

2669

48049.74

... More
Preparation and fixing of location box board on 03 mm ACP sheet with size 12 x 18 size A3 for location box including pasting of printed/ painted vinyl sheet and lamination (printing/painting of location detail on vinyl sheet covered in schedule item separately).(Bhilad:-45 & Billimora:-45)

-

-

33

... More
Track Lead Junction Boxes as per C.Rly Drg. No.RST 11509 made from fiber glass/SMC/FRP along with terminal blocks.(Bhilad:-136 & Billimora:-164)

300

1120

336195

... More
Gauge Tie plate nylon insulation as per RDSO Drg No: T- 10372Alt2,T- 10368, T- 10371Alt2, T-15083/88/Alt2 & T-11690/Alt2 and to thespec IRS: S-40/84 with latest amendments as applicable.(Bhilad:-8 & Billimora:-10)

18

1503

27066.24

... More
Supply and installation of RCC cable route marker engraved and painted on both side along the route every 50mm and route diversion as per Drg. No 4014/00/CC4 or latest/ Stone marker.(Bhilad:-80 & Billimora:-80)

160

412

66025.6

... More
High density polyethylene pipes (HDPE) of 110 mm/125 mm outer Dia, 10 mm wall thickness, along with one coupler for every 6 Mtr. As per spec. No. Is 4984:2016 with latest amendments and material grade: PE 80.(Bhilad:-700 & Billimora:-700)

1400

701

981400

... More
Provision of bonding with GI wire 4mm Dia (8 SWG) for track jumper & fish plate joints 62 bonds. This will include drilling of 7.0/7.1/7.2 mm Dia holes in rails (4 Nos.) and provision of two jumpers for each bond, clipping of bonds etc. with contractors own tools as per instruction of Rly. Engineer at site. (Bhilad:-50 & Billimora:-50)

100

185

18547

... More
Installation of Apparatus Cases with miniature 'E' type lock on CC foundation. This includes filling of location foundations with river bed sand and plastering on top of the sand. 'E' Type lock will be provided by Railway.Half Case (Bhilad:-15 & Billimora:-15)

30

657

19714.5

... More
Position Light Shunt Signal Unit Complete, with offset bracket, hood,Cover etc. as per Drg. No. SA-23840 suitable for LED Signal Lighting Unit. (Supply of LED Unit is not covered in this item).(Bhilad:-2 & Billimora:-5)

7

3359

23518.18

... More
Termination of outdoor cables, main cables laid in location boxes, Cable termination rack etc. at both ends on ARA terminal or on 8 way terminals or on screw less connectors. Both ends 37 of a cable core terminated shall be counted as one terminal. This includes all associated works of pulling out the cable from underground, peeling off insulation, dressing of cable core supported on sting rod with contractor's own material. The work shall be done as per instructions of Rly engineer at site.(Bhilad:-9000 & Billimora:-9000)

18000

23

426600

... More
Excavation of cable trench as per cable route plan, 1 Mtr. deep and of 0.3 Mtr. to 0.6 Mtr wide advised by Engineer-in-charge alongside the track in normal (all type) soil/strata, conforming to distances as per cable route plan and refilling. This work includes clearing of route 41 from bushes etc., covering of cable laid in trench by loose soil for a layer of 50mm thickness approximately before covering by bricks. The work shall be done as per the extant practice on Western Railway and instructions of Railway Engineer at site. In case 1m depth of trench is not achievable due to site conditions, specific approval of JA grade officer will be required for each site where trench depth of 1m is not possible. Without the approval of JA Grade officer, no payment for trenching will be made for trench depth less than 1m.(Bhilad:-1000 & Billimora:-1200)

2200

839

1845800

... More
Design of Cable Route Plan submission of Three paper copies for approval. (Bhilad:-1 & Billimora:-1)

2

9873

19746

... More
Position Light Shunt Signal Unit Complete with Post (made of GIPipe of 80 mm 10 Diameter Medium Class IS Spec. No. IS: 1239 Pt.1/1990) Base, Hood, and Cover, etc. as per Drg. No. SA-23840,Signal Number Plate, suitable for LED Signal Lighting Unit. (Supplyof LED Unit is not covered in this item). (Bhilad:-10 & Billimora:-8)

18

4530

81540

... More
Erection of CLS Post with base and signal unit on top or on OFF set Bracket, fixing of front and back staging, ladder and guards with contractor's own brackets and fixing materials. This also includes erection of auxiliary signals like calling on, shunt signal if any... The work shall be done 7 as per instructions of Rly engineer at site. It also includes provision & fixing of maintenance platform as per design given by Engineer -In-Charge at site. It also includes supply of padlock for signal units and cable termination box. X' arms to be provided by the contractor till the signals are introduced. The Item includes cutting of Signal post if required by Site In charge. 2/3/4 aspect signal unit mounted directly on signal post.(Bhilad:-7 & Billimora:-9)

16

8338

133419.84

... More
Supply and fixing of polyolefin cable channel (Injection Moulded Plastic cable Duct) of size width 100/200 mm, height 155/230 internal/external, length 1 meter produced of polyolefin 40 with fire, protection class K-1 in accordance with DIN 53438 part all for laying signaling/telecom cables, channel attachable to each other with male female swallowtail connectors and having suitable detachable cover including supply of all fixing materials like Brackets,etc. , as per RDSO STS/E/cable laying practice Vol-IV and as per technical specifications.(Bhilad:-1000 & Billimora:- 1000)

2000

1589

3178000

... More
Portable Handheld Electronic Labeller with 05 nos. of tape cassette having following 36 or better specifications:1) Print Resolution: 180 dpi,64 dots2) Print Speed: 20mm/sec3) No. of Lines Printable: 2 Lines4) Tape Cassette: 12mm 5) AC Adapter with rechargeable alkaline batteries.6) Accepted make: Brother/Epson/Casio. (Bhilad:-1 & Billimora:-1)

2

46259

92518.44

... More
Point insulation Complete set as per RDSO Specification IRS:S-40/84 for Switch bracket, Split-Stretcher bar & Gauge tie plates (52Kg/60Kg as per site requirement).(Bhilad:-8 & Billimora:-10)

18

1345

24226.74

... More
Miniature 'E' type lock complete with keys as per RDSO Drg. No. SA 3473, 3373 & spec. IRS(S) 30/64. Ward to be specified by Engineer - in - charge.(Bhilad:-90 & Billimora:-90)

180

2081

374673.6

... More
Digging of trench 1.2 M deep from rail flange/ road level and, 0.3 Mtr to 0.6 Mtr wide 42 and back filling after placing of DWC/ RCC/GI pipe. (Placing of DWC/RCC/GI pipe covered separately).The ballast disturbed be screened and dressed as required by Engineer-in-charge or his representatives and road tarred immediately. For track crossing, Drg. No.CSTE/3644 Pg.7 of 11 and for Road Crossing, Drg. No. CSTE/3644 Pg. 5 of 11 are to be followed.(Bhilad:-100 & Billimora:-100)

200

873

174786

... More
Cartridge fuse block made of PBT as per RDSO Drg No SA-23748 Alt 4 & Spec No IRS 47 S 75/2006 with the latest amendment. The fuse block shall be suitable for round-head type voltage fuses. This also includes the supply of equivalent no of ND type Fuses of 2A capacity as per specification IRS S-78/92.(Bhilad:-306 & Billimora:-369)

675

129

87351.75

... More
Removal of sleepers. (Bhilad:-25 & Billimora:-125)

-

-

57

... More
Excavation and Casting of Apparatus Case foundation with contractor's own materials 28 including cement and anchor bolts of standard size. The required scaffolding Ferma etc. for Casting of foundation will have to be brought by the contractor at his own cost.Half Case as per Drg No SK 747or CSTE/5074 or SS Location.(Bhilad:-15 & Billimora:-15)

30

5487

164635.8

... More
Providing Ferrules of cable termination as per latest policyissued by HQ. The work to be done without disturbing existingconnections. Contractors will provide ferrules as per colour codeand nomen clature given by Engineer incharge. (Bhilad:-9000 & Billimora:-9000)

18000

4

77940



Evaluation Notes How It Works ?

Related Tenders

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.