Urban Development Authority Tender

Search for the latest Gujarat tenders online related to civil works, road & transport, pipelines and more easily here on BidAssist. Here you can get any and every tender that is posted on the eProcurement Gujarat website, minus the clutter. No need for a tender ID, as on BidAssist, you can view any Gujarat tender by merely typing Gujarat in the search box.

Urban Development Authority Tender

Works

Civil And Construction

Drainage Work

Eprocure

Ahmedabad, Gujarat

Opening Date11 Oct 2024

Closing Date12 Dec 2024

Tender AmountRefer Documents

Notes

Download

Costs

EMD
₹ 1,20,00,000
Document Cost
₹ 18,000
Tender Fee
Refer Documents

Summary

Construction And 5 Years Of Operation And Maintenance Of Storm Water Disposal Scheme For Shela, Manipur, Godhavi And Sanathal-telav.

Description

Unlock the Tender details for free

Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user

Contact

Tender Id
2024_AUDA_830099_1
Tender No
Job No APLIP/8/2024-25
Tender Authority
Urban Development Authority View
Purchaser Address
-
Website
http://eprocure.gov.in

Unlock the Tender details for free

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

Request Call Back

BOQ Items

DO_NOT_SHOW

Quantity-

Rate-

Amount -

View all details for FREE

(iv) For depth greater than 4.5 m upto 6.0 m

Quantity2760

Rate-

Amount -

(v) For depth greater than 6.0 m upto 7.5 m

Quantity132

Rate-

Amount -

Providing bedding including ramming, watering, levelling consolidating etc. complete as per standard and instruction of engineer in charge with required quality sand brought from outside including all lead.

Quantity3710

Rate-

Amount -

Providing and laying controlled cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and curing etc. complete. (including cost of form work but excluding cost of reinforcement) (For bedding)

Quantity751

Rate-

Amount -

Providing and casting in situ mass cement concrete in 1:4:8 proportion using granite quartzite trap metal of size 25 mm to 40 mm including consolidation curing etc. complete.

Quantity15525

Rate-

Amount -

Providing TMT Bar Fe-500D reinforcement bars for R. C. C. work including bending, binding and placing in position etc. complete.

Quantity17

Rate-

Amount -

Providing and supplying lSI marked R.C.C. pipes with Ordinary Portland Cement in standard lengths of following class and diameter suitable Socket and Spigot joints including EPDM Rubber Ring as per for IS 5382-1985 including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to site stacking etc. complete. (IS - 458/2021) 'Note : One rubber ring should be supplied with each full length socketed pipe. RCC NP3 Pipe (i) 600 mm dia

Quantity8675

Rate-

Amount -

(ii) 700 mm dia.

Quantity730

Rate-

Amount -

(iii) 800 mm dia.

Quantity2180

Rate-

Amount -

(iv) 900 mm dia.

Quantity2710

Rate-

Amount -

(v) 1000 mm dia.

Quantity2370

Rate-

Amount -

(vi) 1200 mm dia.

Quantity2610

Rate-

Amount -

(vii) 1400 mm dia.

Quantity2680

Rate-

Amount -

(viii) 1600 mm dia.

Quantity1850

Rate-

Amount -

(x) 2000 mm dia.

Quantity320

Rate-

Amount -

RCC NP4 Pipe (i) 450 mm dia.

Quantity11100

Rate-

Amount -

(ii) 1600 mm dia.

Quantity150

Rate-

Amount -

(iii) 2000 mm dia.

Quantity415

Rate-

Amount -

(iv) 2200 mm dia.

Quantity60

Rate-

Amount -

Lowering, laying and jointing R. C. C. pipes of following diameters in proper position, grade and alignment at all level as directed by Engineer-in-charge including labour, giving hydraulic testing as per lSI code etc. complete. RCC Pipes (any depth) (i) 450 mm dia

Quantity11100

Rate-

Amount -

(ii) 600 mm dia.

Quantity8675

Rate-

Amount -

(iii) 700 mm dia.

Quantity730

Rate-

Amount -

(iv) 800 mm dia.

Quantity2180

Rate-

Amount -

(v) 900 mm dia.

Quantity2710

Rate-

Amount -

(vi) 1000 mm dia.

Quantity2370

Rate-

Amount -

(vii) 1200 mm dia.

Quantity2610

Rate-

Amount -

(viii) 1400 mm dia.

Quantity2680

Rate-

Amount -

(ix) 1600 mm dia.

Quantity2000

Rate-

Amount -

(x) 2000 mm dia.

Quantity735

Rate-

Amount -

(xi) 2200 mm dia.

Quantity60

Rate-

Amount -

Providing & Constructing Precast RCC machinehole in RCC M-40 grade Controlled cement concrete as per drawing, in OPC including excavation, 80 mm thick P.C.C. in M-15, Reinforcement in TMT Fe-500D, PVC Foot steps, Providing & fixing FRC machinehole frame & cover complete etc. complete. (a) For 600, 700 & 800 mm dia. Pipe (upto 4.0 mt. depth) (i) 1.2 dia x 2.0m Depth

Quantity214

Rate-

Amount -

(ii) 1.2 dia - 2.01 to 2.99 m Depth

Quantity17

Rate-

Amount -

(iii) 1.2 dia x 3.0m Depth

Quantity3

Rate-

Amount -

(iv) 1.2 dia - 3.01 to 3.99 m Depth

Quantity2

Rate-

Amount -

(b) For 600, 700 & 800 mm dia. Pipe (above 4.0 m depth) & For 900 mm dia.pipe for any depth (i) 1.5 dia x 2.0m Depth

Quantity39

Rate-

Amount -

(ii) 1.5 dia - 2.01 to 2.99m Depth

Quantity8

Rate-

Amount -

(iii) 1.5 dia x 3.0m Depth

Quantity6

Rate-

Amount -

(iv) 1.5 dia - 3.01 to 3.99 m Depth

Quantity3

Rate-

Amount -

(v) 2.0 dia. x 3.0 m. depth

Quantity19

Rate-

Amount -

(vi) 2.0 dia. - 3.01 m. to 3.99 m. depth

Quantity7

Rate-

Amount -

(vii) 2.0 dia. x 4.0 m. depth

Quantity18

Rate-

Amount -

(viii) 2.0 dia. - 4.01 m. to 4.99 m. depth

Quantity10

Rate-

Amount -

Quantity2

Rate-

Amount -

(ii) 2.4 dia - 5.01 to 5.99 m Depth

Quantity2

Rate-

Amount -

Constructing Cast in Situ RCC Box in RCC M30 grade concrete with TMT Fe-500 reinforcement including PCC 1:2:4, RCC M30 for wall, base slab and top slab, including formwork etc. complete. Concrete work should be fair finish. P.C.C (M-15)

Quantity3431

Rate-

Amount -

R.C.C. Base slab (M-30)

Quantity6403

Rate-

Amount -

R.C.C. walls (M-30)

Quantity5177

Rate-

Amount -

R.C.C. Top slab (M-30)

Quantity6388

Rate-

Amount -

TMT -Fe -500

Quantity1947

Rate-

Amount -

Providing and fixing plastic moulded reinforced steps with 10 mm TOR steel bar with plastic polyproclene (P.P.) material (vergin) etc. complete.

Quantity1690

Rate-

Amount -

Providing fixing in position with proper Jointing , the Precast RCC box Chamber with cover of 800 mm x 800 mm x 800 mm clear section size , made of M-50 grade of concrete with Reinforcement TMT Fe 500 D as per by wet Casting method with necessary cut out in the wall for pipe/drain connection. The rates shall be including the cost of necessary excavation, 100 mm thick PCC in M 10 for foundation & 100 mm thick as bottom , Loading & Transportation to site, unloading, placing, pipe jointing etc as directed by engineer in charge.

Quantity740

Rate-

Amount -

RCC precast M.H. Frame & Cover Manufacture, supply & Delivery at site of work precast RCC M.200 Frame & cover suitable to drainage M.H. and as per type design & Drawing including cost of reinforcement M.S. Angles or Flat, curing mold work etc. (Heavy Duty) 'Frame & Cover

Quantity105

Rate-

Amount -

Extra rate over item of excavation of earth for excavation of asphalt pavement/RCC of thickness upto 0.3 mt. ( By any kind of breaker machine) including cost of operator , fuel & transportation etc. complete.

Quantity60677

Rate-

Amount -

Reinstatement of Bituminous road including with 37.5 mm thick BUSG with Asphalt VG 30 @ 15 kg/10 Sqm for grouting and 5 kg /10 Sqm for tack coat on base course with BT aggregate,200 mm thick WMM ,100 mm thick WBM with 22.4 to 53 mm aggregate,100 mm thick WBM with 45 mm to 63 mm aggregate,200 mm thick GSB I with necessary excavation/loosening and recompacting ground as per respective MoRTH specification and as directed by engineer in charge.

Quantity60597

Rate-

Amount -

Refilling the pipeline trenches including ramming, watering, consolidating disposal of surplus stuff as directed within a radius of 3 km.

Quantity264241

Rate-

Amount -

Shoring or timbering for trench with 50 mm thick planks and suitable size struts etc. complete.

Quantity33913

Rate-

Amount -

Construction of chambers in RCC M30 with Ordinary Portland cement with TMT Fe-500 reinforcement,PCC150 mm thick in M 15,15 mm thick inside cement plaster with Ordinary Portland cement in C.M.1:3 and including the cost of excavation, refilling and PVC foot steps including providing RCC Slab in one single piece with Providing & fixing of FRC (heavy duty) machinehole frame and cover etc. complete. For 1600 mm, 1800 mm, 2000 mm & 2200 mm dia RCC Pipe Excavation (i) For depth upto 1.5 m.

Quantity4425

Rate-

Amount -

(ii) For depth greater than 1.5 m upto 3.0 m

Quantity4143

Rate-

Amount -

(iii) For depth greater than 3.0 m upto 4.5 m

Quantity2384

Rate-

Amount -

(iv) For depth greater than 4.5 m upto 6.0 m

Quantity193

Rate-

Amount -

PCC M-15

Quantity337

Rate-

Amount -

RCC M-30 (i) RCC Wall

Quantity1394

Rate-

Amount -

(ii) RC.C. Top Slab

Quantity343

Rate-

Amount -

(iii) RC.C. Base Slab

Quantity520

Rate-

Amount -

TMT Fe-500D Reinforcement

Quantity263

Rate-

Amount -

15 mm thick Inside Cement Plaster in CM 1 : 3

Quantity5699

Rate-

Amount -

Machinehole Frame & Cover

Quantity148

Rate-

Amount -

Refilling

Quantity5764

Rate-

Amount -

PVC steps

Quantity1539

Rate-

Amount -

40 mm thick IPS Flooring (1:2:4)

Quantity113

Rate-

Amount -

Construction of outlet structures in RCC M30 with Ordinary Portland cement with TMT Fe-500 reinforcement,PCC in M 15, RCC base slab & RCC wall, rubble pitching, 40 mm thick flooring in 1:2:4 with 20 mm thick cement plaster with Ordinary Portland cement in C.M.1:3 with water proofing compound etc. complete Excavation (i) For depth upto 1.5 m.

Quantity1130

Rate-

Amount -

(ii) For depth greater than 1.5 m upto 3.0 m

Quantity1004

Rate-

Amount -

(iii) For depth greater than 3.0 m upto 4.5 m

Quantity782

Rate-

Amount -

(iv) For depth greater than 4.5 m upto 6.0 m

Quantity553

Rate-

Amount -

(v) For depth greater than 6.0 m upto 7.5 m

Quantity102

Rate-

Amount -

PCC M-15

Quantity42

Rate-

Amount -

RCC M-30 (i) RCC Wall

Quantity75

Rate-

Amount -

(ii) RC.C. Base Slab

Quantity172

Rate-

Amount -

TMT Fe-500D Reinforcement

Quantity31

Rate-

Amount -

20 mm thick Inside Cement Plaster in CM 1 : 3 with water proofing

Quantity420

Rate-

Amount -

40 mm thick cement concrete flooring 1:2:4 with water proofing compound

Quantity272

Rate-

Amount -

Rubble pitching

Quantity376

Rate-

Amount -

PVC water stop

Quantity302

Rate-

Amount -

Supplying, cleaning, cutting, bending, welding, fabricating, erecting structural steel in position irrespective of locations and levels as per drawing including handling and transport etc. complete including applying two coats of primer red oxide and two coats of approved quality of paint over it etc. complete as directed for Flap gate.

Quantity6038

Rate-

Amount -

Providing connection of Proposed box to Existing Structure by Hilti or similar system incuding making hole water tight, RCC wall by providing & laying CC M30 including necessary demolition, roughning & cleaning of concrete surface including formwork, vibrating, curing & using Water Proofing compound & quik setting material to make it leak proof etc. comp. as directed by Engineer in charge

Quantity1

Rate-

Amount -

Pushing Work Providing and constructing RCC M-35 grade RCC box of following size in segments of required length including open excavation for thrust bed necessary formwork, concreting curing, vibrating, pushing etc. complete as per contractor's own design approved by competent authority based on approved GAD by competent authority. The item includes a) Providing and laying M-25 grade for cast in situ thrust bed and thrust wall with necessary excavation with shoring and strutting, formwork, curing, vibrating as per contractor's own design approved by competent authority. b) Providing and casting RCC box in M-35 grade concrete. c) Providing and fixing TMT-Fe-500D bars for RCC box including thrust bed and thrust wall including supplying, cleaning, cutting, bending and placing in position, lapping, binding with 16 SWG soft iron wire irrespective of locations and levels. d) Providing front shield, intermediate shield, jointing, jacking rigs, sliding channels spacers etc. All the structural steel used except intermediate shields will be ownership of contractor after pushing work is completed. e) Pushing with hydraulic jack without disturbance to pavement including all necessary excavation for thrust bed and thrust wall, necessary shoring and strutting required, necessary dewatering required if any, excavation within the box with all necessary refilling upto ground level after pushing work completed including carting of extra earth upto a lead of 5 Kms. This also includes necessary labour cost for pushing and including necessary cost of hydraulic pipe and oil for hydraulic jacks including necessary depreciation cost of jack. f) Applying 2 coats of approved quality epoxy painting on top and sides of precast units after casting work completed including necessary groutings with cement between two precast units after pushing work is completed. 2.5 m. x 2.5 m.

Quantity60

Rate-

Amount -

Manufacturing, testing, supplying, loading, transporting to worksite, unloading. RCC pipe in OPC Cement with Socket and spigot joints as per IS 458 -2021 including EPDM Rubber ring as per IS 5382-1985 etc. comp. & lowering in Box as Directed by Engineering in charge. RCC NP4 Pipe (with OPC Cement) 1600 mm dia.

Quantity60

Rate-

Amount -

Construction of Storm Water Pumping Station (at Shela Pond, Manipur-Godhavi Pond 1, Manipur-Godhavi Pond-2 & at Sanathal Telav with Compound wall including Internal road, main gate (Civil Work) Excavation for foundation for all sorts of soil & murrum including sorting out and stacking of useful materials and disposing of the excavated stuff up to 50 meter lead. (i) For depth upto 1.5 m.

Quantity3863

Rate-

Amount -

(ii) For depth greater than 1.5 m upto 3.0 m

Quantity2835

Rate-

Amount -

(iii) For depth greater than 3.0 m upto 5.0 m

Quantity3111

Rate-

Amount -

(iv) For depth greater than 5.0 m upto 6.0 m

Quantity1419

Rate-

Amount -

(v) For depth greater than 6.0 m upto 7.0 m

Quantity1305

Rate-

Amount -

(vi) For depth greater than 7.0 m upto 8.0 m

Quantity1107

Rate-

Amount -

(vii) For depth greater than 8.0 m upto 9.0 m

Quantity910

Rate-

Amount -

(viii) For depth greater than 9.0 m upto 10.0 m

Quantity623

Rate-

Amount -

(ix) For depth greater than 10.0 m upto 11.0 m

Quantity460

Rate-

Amount -

(x) For depth greater than 11.0 m upto 12.0 m

Quantity191

Rate-

Amount -

(xi) For depth greater than 12.0 m upto 13.0 m

Quantity123

Rate-

Amount -

(xii) For depth greater than 13.0 m upto 14.0 m

Quantity55

Rate-

Amount -

'Filling with available excavated earth (excluding rock) in trenches, plinth, sides of foundation in layers not exceeding 20 cm in depth consolidating each deposited layer by ramming and watering.

Quantity9079

Rate-

Amount -

Providing and laying ordinary cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and curing etc. complete (with form work) For Foundation and in plinth below flooring.

Quantity469

Rate-

Amount -

Providing and laying cement concrete M15( 1:2:4) (1 cement : 2 coarse sand : 4 hand broken stone aggregate 20 mm nominal size) and curing etc. complete (Excluding cost of form work) For Foundation and in plinth.

Quantity66

Rate-

Amount -

Providing and laying controlled cement concrete M-30 'with Ordinary portland cement for water retaining structures with vibrating, curing etc. complete including the cost of form work but excluding the cost of reinforcement for RCC work stated below etc. 'complete at any height depth as directed. R.C.C. slab and footings

Quantity1051

Rate-

Amount -

R.C.C. walls and baffle wall

Quantity1878

Rate-

Amount -

R.C.C. staircase

Quantity20

Rate-

Amount -

R.C.C Beams

Quantity193

Rate-

Amount -

Platform

Quantity20

Rate-

Amount -

Fillet

Quantity20

Rate-

Amount -

RCC Column

Quantity47

Rate-

Amount -

R.C.C. Pedestal

Quantity20

Rate-

Amount -

R.C.C. Top slab

Quantity139

Rate-

Amount -

Providing and laying controlled cement concrete in M-30 grade concrete in Ordinary Portland Cement with vibrating, curing etc. complete including the cost of form work but excluding the cost of reinforcement for RCC work stated below etc. 'complete at any height as directed. (For Retaining wall type compound wall of sewage pumping stations) RCC Column

Quantity24

Rate-

Amount -

RCC Coping

Quantity15

Rate-

Amount -

Providing and laying controlled cement concrete M25 for superstructure (above plinth level) in ordinary portland cement with vibrating, curing etc. complete including the cost of form work but excluding the cost of reinforcement for RCC work stated below etc. complete at any height, 'as directed. (For super strucutre of storm water pumping stations & compound wall of sewage pumping stations) R.C.C. beams, lintels and bracket for gantry or chain pully blocks, plinth beams, tie beams.

Quantity165

Rate-

Amount -

R.C.C. slabs and platform

Quantity122

Rate-

Amount -

R.C.C. weather shed, pardi & staircase

Quantity20

Rate-

Amount -

R.C.C. columns

Quantity90

Rate-

Amount -

R.C.C. footing

Quantity79

Rate-

Amount -

R.C.C. walls

Quantity16

Rate-

Amount -

R.C.C. coping

Quantity18

Rate-

Amount -

Providing and laying cement concrete 1:1.5:3 (1 cement :1.52- Coarse Sand: 3-graded stone aggregates 20 mm nominal size) & curing complete including cost of formwork excluding cost of reinforcement for RCC work in Foundation & Plinth. (upto 10 ton)

Quantity20

Rate-

Amount -

Providing TMT Bar Fe-500 reinforcement bars for R. C. C. work including bending, binding and placing in position complete upto floor two level.

Quantity498

Rate-

Amount -

Providing and fixing water tight construction or expansion joints 150 mm. dia. Wide thin ribbed PVC etc. complete.

Quantity2181

Rate-

Amount -

Half brick masonary in common burnt clay building bricks having crushing strength not less than 35 Kg./sq.cm. in cement mortar (1:4) in super structure.

Quantity40

Rate-

Amount -

Brick work using common burnt clay building bricks having crushing strength not less than 35kg / Sq. C. M. in ramp, steps and Foundation & Plinth in cement morter1:5 (1 cement : 5 coarse sand) including racking out joints, curing, scaffolding required if any etc. complete, as directed.

Quantity312

Rate-

Amount -

Brick work using common burnt clay building bricks having crushing strength not less than 35 kg / Sq. Cm. in foundation and plinth in cement mortar 1:6. (1 cement : 6 coarse sand)

Quantity20

Rate-

Amount -

Brick work using common burnt clay building bricks having crushing strength not less than 35 kg/cm2 in superstructure and parapet in cement mortar 1:6. (1 cement : 6 coarse sand)

Quantity308

Rate-

Amount -

Providing and applying with two coats 20 mm thick inside cement plaster with Ordinary Portland cement and water proofing agent on inside of inlet chamber & sump consisting of 12 mm thick backing coat of C. M. 1:3 (1 cement : 3 sand) and 8 mm thick finishing coat of C. M. 1:1 (1 cement: 1 sand) etc. complete including necessary curing, scaffolding required if any etc. complete.

Quantity3700

Rate-

Amount -

Providing and applying 20 mm thick sand faced cement plaster at outside RCC / brick on work upto height 10 mtr. above ground level consisting of 12 mm thick backing coat of C. M. 1:3 (1 cement : 3 sand) and 8 mm thick finishing coat of C. M. 1:1 (1 cement : 1 sand) etc. complete.

Quantity3362

Rate-

Amount -

Providing and applying 15 mm thick cement plaster in single coat on brick / concrete work for interior plastering upto floor two level finished even and smooth in Cement mortar 1 : 3 (1 cement : 3 sand) etc. complete as directed

Quantity4712

Rate-

Amount -

Providing and laying 40 mm thick cement concrete flooring in 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including water proofing compound finishing with a floating of neat cement etc. complete laid in one layer finished including necessary curing with sulphate resistant cement in bottom of Inlet chamber & sump etc.

Quantity430

Rate-

Amount -

Providing and laying polished Kota stone slab 25 mm thick in riser of steps, dado & pillars, skirting, laid on 10 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry including rubbing and polishing etc. complete in H.T., L.T. room etc.

Quantity160

Rate-

Amount -

Providing and laying polished Kota stone slab flooring over 20 mm (average) thick base of cement mortar 1:6 (1 cement : 6 coarse sand) laid over and jointed with grey cement slurry including rubbing and polishing etc. complete 25 mm thick in H.T., L.T. Room etc. of pumping stations.

Quantity198

Rate-

Amount -

Providing and laying 40 mm thick heavy duty cement concrete flooring in 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) with ironite powder including finishing with a floating of neat cement etc. complete at plinth level of pumping station. 40 mm thick

Quantity508

Rate-

Amount -

Distempering in 3 coats with oil bound distemper of approved brand and manufacture and of required shade on wall surface to give an even shade over and including a primer coat with distemper primer of approved brand, thoroughly brushing the surface free from mortar dropping and other foreign material and also inclusive of preparing the surface even and smooth etc. complete.

Quantity3242

Rate-

Amount -

Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture of undercoated wall surface to give an even shade including thoroughly brushing the surface free from mortar dropings and other foreign matter and sand papered smooth.

Quantity1892

Rate-

Amount -

Providing and fixing window having extruded aluminum Colour anodized section frame main outer size 95mm x 24mm x 1.17 mm (of Jindal Section no : 2459 @ wt. of 0.738 Kg/mt), horizontal Three track member size 92mm x 31.75 mm x 1.30 mm (of Jindal Section no. 8688, @ Wt. 1.07 Kg/mt), vertical member of size 92mm x 31.75mm x 1.50 mm (of Jindal Section no. 8933, @ Wt. 1.06 Kg/mt.) with sliding shutters of horizontal member size 40mm x 18mm x .29 mm (of Jindal section no. 8947 @ wt. 0.456 Kg/mt.) vertical member of size 40mm x 18mm x 1.29mm (of Jindal Section no. 8949 @ wt. of 0.456 Kg/mt with 5 mm thick transparent bronze colour tinted float glass with powder coated aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame as per details etc.

Quantity48

Rate-

Amount -

Providing and fixing standard extruded of alluminimum section of size 63mm x 38.10mm x 1.2mm (Jindal Section : 2434, @ Wt. 0.643 Kg/mt.) with colour powder coated alluminium frame for ventilation with 5 mm thick frosted glass as details etc complete for Ventilation.

Quantity42

Rate-

Amount -

Providing & fixing in position aluminium grill with 15 micron natural matt brush finish anodised as per over all size shown on the drawings and aluminium sections of approved make conforming to IS:733 and IS : 1285, made out of DG - 104 design ( Jindal or equivalent ) fixed with required size F channel, rawl plugs and screws or with fixing clips, or with expansion hold esters including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. and aluminium snap beading for glazing / panelling, C. P.brass/stainless steel screws, including standard anodised aluminium fittings and fixtures of approved make and of adequate size and in adequate numbers, including cost and fixing of fixtures etc. complete as per detailed drawings with all lead and lifts.

Quantity90

Rate-

Amount -

Providing and fixing rolling shutter of approved make made of 80 mm. wide M.S. laths inter lock together their entire length and jointed together at the end locks mounted on specially designed pipe shaft with bracket plates, guide channels and outside locking with push- pull operation including the cost of hood cover and spring etc. complete. Shutters having width below 3.5 m.

Quantity20

Rate-

Amount -

Providing and fixing 50 cm wide M.S. Ladder fabricated from M.S. Flats 10 mm x 75 mm with 20 mm dia steel bar steps in double rows, @ 30 em C/C. The include stays of 10 mm x 50 mm flats fixed at 3 meter C/C wtih welding anchoring and 3 coats anticorrosive paint. (M.S. ladder (without safty cage)

Quantity72

Rate-

Amount -

Providing and fixing 40mm dia. GI pipe medium weight (3.17 kg/rmt approx ) quality as railing with angle iron support at 1.5 m c/c using 75 x 75 x 10 mm angles, 1.15 m long with three rows of pipes as railing including necessary painting with two coats of approved quality oil paint over one coat of approved primer including necessary welding, bolting required, if any.

Quantity150

Rate-

Amount -

Providing and fixing MS grating with 8 mm thick 50 mm wide flat at 50 mm c/c to form grid pattern as specified and wherever directed including two coats of approved quality oil paint with one coat of primer red oxide etc. complete.

Quantity70

Rate-

Amount -

Quantity8458

Rate-

Amount -

Providing and fixing plastic moulded reinforced steps with 10 mm TOR steel bar with plastic polyproclene (P.P.) material (vergin) etc. complete.

Quantity127

Rate-

Amount -

Grouting with 1:3 cement mortar for anchor bolt pockets machine bases, pipe sleeves, pocket holes etc. including roughening and cleaning of concrete surfaces curing etc. complete.

Quantity8

Rate-

Amount -

Providing, Cement vata (10cm. X 10. cm. size) quarter round in cement motar 1:1 including neat cement finishing, watering etc. complete.

Quantity436

Rate-

Amount -

Providing 100 mm x 100 mm size vata in cement concrete (1:2:4) including water proofing compounds, smooth finish, curing, etc. complete for the internal side of the sump, pump house and chlorination room.

Quantity404

Rate-

Amount -

Supplying & fixing insert plate of size 150 x 150 x 6 mm in wall alongwith ISA 100 x 100 x 8 mm angle in position for support of vertical delivery pipe, as per drawing including handling and transporting etc. complete.

Quantity100

Rate-

Amount -

Providing and laying brick bat coba on terrace including 'necessary watering , ramming, etc.complete.

Quantity558

Rate-

Amount -

Providing and fixing in position PVC vent pipes of 160 mm dia 3 m length.

Quantity156

Rate-

Amount -

Providing, Supplying and fixing ISI mark G.I pipes with coupling of following class and diameter including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to departmental stores, stacking etc. complete. (IS:1239) Medium Duty. 15 mm dia GI pipe sleeves

Quantity20

Rate-

Amount -

25 mm dia GI pipe sleeves

Quantity20

Rate-

Amount -

50 mm dia GI pipe sleeves

Quantity20

Rate-

Amount -

Dewatering by pumping set of required capacity including temporary platform carting pumping at site and fixing the same in position including all accessories, and fuel and labour etc. complete.

Quantity172800

Rate-

Amount -

Labour charges for writing of capital letter in green plaster of 30 cm height, 25 mm thick and 12 mm embossed as per given detail in outside of compound wall as instructed by Engineer in charge.

Quantity196

Rate-

Amount -

Providing in line level plumb, fabricating and fixing three row horizontal barbed wire fencing and punched tape concertina coil of 9 turns per meter of 610 mm diameter fixied with clips on top of the angle iron posts. The punched tape concertina coil having sharp barbs at every 25 mm spacing shall be 0.5 mm thick and 19 mm width and weighting 13 Kg./100 mtr. (Average) as per manufacture's specification. The rate shall also include providing and fixed 1.20 mt. total long MS angle 40 x 40 x 6 mm @ 3.00 mt. c/c spacing embedded in RCC column, angle posts shall be painted with one coats of red oxide and two coats of enamel paint of approved quality at top of compound wall.

Quantity585

Rate-

Amount -

Fabricating and fixing in position MS structural section such as flat, pipes, plates, hold fast, anchoring bolts / bars of required size including fixing, welding and two coats of approved anti corrosive paint over prime coat of red-oxide including RCC gate column as per drawing etc. complete as directed by Engineer-in-charge. a) 2.2 m height and 6 m wide main and wicket gate

Quantity2600

Rate-

Amount -

Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an required shape even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials. Etc. Complete.

Quantity2935

Rate-

Amount -

Construction of 200mm thick un-reinforced, dowel jointed, plain cement concrete pavement with M-35 grade of concrete including Provision of contraction, expansion, construction and longitudinal joints, joint filler,, sealant primer, joint sealant,, dowel bar,Tie rod, admixtures as approved, finishing to line sand grades as per drawing as per MoRTH clause 602 over a 100mm thick DLC in M10 with necessary excavation / loosening and re-compacting ground as per detail and specification.

Quantity180

Rate-

Amount -

Earthwork in embankment including breaking clods, dressing with all lead and lift including rolling of earthwork in layers including filling in depression, including water of earth as directed. (from borrow area within 3 km lead).

Quantity3800

Rate-

Amount -

Empty boring through all sorts of strata for providing 0.35m diameter R.C.C bored piles to required depth including providing necessary casing pipe with all plants and equipments as required complete. 350 mm (for compound wall of sewage pumping station)

Quantity545

Rate-

Amount -

Providing & laying controlled cement concrete M 300 for R.C.C. bored piles of 0.35 / 0.45 m dia. including ramming, vibrating, curing and finishing complete.

Quantity64

Rate-

Amount -

Providing & casting in-situ controlled cement 'concrete M 300 for R.C.C. pile cap including necessary formwork, vibrating, curing and finishing 'complete.

Quantity88

Rate-

Amount -

Providing and fixing iron doors including using the frames of channels, angles and flats and MS sheets as per drawing including revating or welding and fixing in concrete block including iron fixture and fastening with one coat of primer and 3 coats of enamel paint etc. complete.

Quantity2520

Rate-

Amount -

Pipeline from Pond to SWPS Excavation for trenches with shoring & strutting if required as per required gradient and line including all safety provision using site rails and stacking excavated stuff including up to all required lead cleaning the site etc. complete for all lift and strata as specified. In all sorts of Soil and soft murrum. 0.0 to 1.5 m.

Quantity2721

Rate-

Amount -

1.5 to 3.0 m.

Quantity2272

Rate-

Amount -

3.0 to 4.5 m.

Quantity1821

Rate-

Amount -

4.5 to 6.0 m.

Quantity1259

Rate-

Amount -

6.0 to 7.5 m.

Quantity679

Rate-

Amount -

7.5 to 9.0 m.

Quantity186

Rate-

Amount -

Providing and supplying lSI Standard R.C.C. pipes(OPC) in standard lengths of following class and diameter suitable for either collar joints or rubber ring joints including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to departmental stores, stacking etc. complete. (IS - 458/ 1989) 'Note : One rubber ring should be supplied with each full length socketed pipe, cost included in rates below. RCC NP4 Pipe 1200 mm dia.

Quantity100

Rate-

Amount -

1600 mm dia.

Quantity100

Rate-

Amount -

Lowering, laying and jointing R. C. C. pipes of following diameters in proper position, grade and alignment at all level as directed by Engineer-in-charge including conveyance from stores to site of work, labour, giving hydraulic testing as per lSI code. RCC Pipes (Any depth) 1200 mm dia.

Quantity100

Rate-

Amount -

1600 mm dia.

Quantity100

Rate-

Amount -

Providing & Constructing Precast RCC Manhole in RCC M-40 grade Controlled concrete as per drawing, in OPC including excavation, 80 mm thick P.C.C. in M-15, Reinforcement in TMT-500, PVC Foot steps, Providing & fixing FRC Manhole frame & cover complete etc. For 1200 dia. pipe for any depth 2.0 dia x 7.0m Depth

Quantity2

Rate-

Amount -

2.0 dia - 7.01 to 7.99 m Depth

Quantity2

Rate-

Amount -

For 1600 dia. pipe for any depth 2.4 dia x 5.0m Depth

Quantity1

Rate-

Amount -

2.4 dia - 5.01 to 7.99 m Depth

Quantity1

Rate-

Amount -

For 1600 dia. pipe for any depth 2.4 dia x 8.0m Depth

Quantity1

Rate-

Amount -

2.4 dia - 8.01 to 8.99 m Depth

Quantity1

Rate-

Amount -

Refilling the trenches incl. ramming, watering, consolidating desposal of surplus stuff as directed within a radius of 3 km.

Quantity8491

Rate-

Amount -

Rising Main for (SWPS at Shela pond, Manipur-godhavi pond-1, Manipur-godhavi pond-2 & at Sanathal - Telav) Excavation for pipeline trenches with shoring & strutting if required as per required gradient and line including all safety provision using site rails and stacking excavated stuff including up to all required lead cleaning the site etc. complete for all lift and strata as specified. In all sorts of Soil and murrum. (i) For depth upto 1.5 m.

Quantity31825

Rate-

Amount -

(ii) For depth greater than 1.5 m upto 3.0 m

Quantity9396

Rate-

Amount -

Designing, Manufacturing, Lowering, Laying and Jointing MS pipe as well as MS specials in accordance of IS:5822-1994 or its latest edition in suitable lengths from MS plates (plates shall be as per IS : 2062-1992 or its latest editin of Grade 'B'-Fe 410), as per IS : 3589-1991 or its latest edition including cutting, bending of plates to the required shapes,welding by Submerged Arc Welding, having joints with bevelled ends including ultrasonic and Radiographic at random including inside zinc epoxy paint in two coats and 25 mm thick guniting on outside in CM (1:3) under pressure with reinforcement as per IS 1566 including mixing,curing etc. and hydraulic testing and tolerances for outside diameter of pipe shell. Circularity test as per IS : 3589-1991 and all other required tests, carting to the site of coating and unloading, stacking, etc. including all taxes, duties, local taxes etc. complete, as required. '1016 mm Outside diameter with 8.8 mm thick MS plate

Quantity2500

Rate-

Amount -

1219 mm Outside diameter with 10 mm thick MS plate

Quantity3750

Rate-

Amount -

Supply, fabrication, transporting, including all taxes, insurance etc. aligning & fixing in position flange ends and mild steel specials and fixtures including in lining and out coating in accordance with IS : 5822-1994 or its latest edition from MS plates or coils (plate shall be as per IS : 2062 as per its latest eidtion of Grade-B Fe-410 & coil shall be as per IS : 10748 as per its latest edition). Pipe manufactured shall be as per IS : 3589-2001 or its latest edition including cutting, bending, drilling holes and complete welding. The rate also includes supply of rubber packing, bolts, nuts etc. wherever required including Radiographic testing or Ultrasonic testing in factory (15% of welded length of each joint) as per IS- 3589-2001. M.S. specials flanged ends Above 300 mm dia.

Quantity49515

Rate-

Amount -

Providing,supplying ,fixing ISI mark Ductile Iron D/F manually gear operated SLUICE VALVE including taxes, insurance, transportation, fright charges, Octroi Inspection, charges, loading , unloading, conveyance to site stacking, etc. complete. valve with ISI mark only. PN 1.0 with hand wheel /cap operated (PD Type Short body) 700 mm dia

Quantity2

Rate-

Amount -

800 mm dia

Quantity2

Rate-

Amount -

200 mm dia.

Quantity14

Rate-

Amount -

200 mm dia.

Quantity14

Rate-

Amount -

Quantity16

Rate-

Amount -

Providing and laying controlled cement concrete M20 (1:1.5:3) for thrust block & encasing including formwork but excluding the cost of reinforcement with curing etc. complete, as directed.

Quantity695

Rate-

Amount -

Providing TMT Bar Fe-500 bar reinforcement for R.C.C work including bending, binding and placing in position complete up to floor two level.

Quantity5

Rate-

Amount -

Quantity12952

Rate-

Amount -

Quantity12952

Rate-

Amount -

Refilling the pipeline trenches including ramming, watering, consolidating desposal of surplus stuff as directed within a radius of 3 km.

Quantity34817

Rate-

Amount -

Construction of chambers in RCC M30 with OPC cement with TMT Fe-500 reinforcement,PCC150 mm thick in M 15,15 mm thick inside cement plaster with OPC Cement in C.M.1:3 and depth of chamber from G.L. to pipe invert level including complete civil works and inclusive of the cost of excavation, refilling and PVC foot steps including providing RCC Slab in one single piece with fixing of FRC (heavy duty) machinehole frame and cover. Excavation (i) For depth upto 1.5 m.

Quantity365

Rate-

Amount -

(ii) For depth greater than 1.5 m upto 3.0 m

Quantity334

Rate-

Amount -

PCC M-15

Quantity29

Rate-

Amount -

RCC M-30 RCC Wall

Quantity83

Rate-

Amount -

RC.C. Top Slab

Quantity25

Rate-

Amount -

RC.C. Base Slab

Quantity34

Rate-

Amount -

TMT Fe-500 Reinforcement

Quantity18

Rate-

Amount -

15 mm thick Inside Cement Plaster in CM 1 : 3

Quantity379

Rate-

Amount -

RCC Precast MH Frame & Cover

Quantity18

Rate-

Amount -

Refilling

Quantity388

Rate-

Amount -

PVC steps

Quantity144

Rate-

Amount -

Providing connection of Proposed Pipe to Existing Structure by Hilti or similar system incuding making hole water tight, RCC wall by providing & laying CC M30 including necessary demolition, roughning & cleaning of concrete surface including formwork, vibrating, curing & using Water Proofing compound & quik setting material to make it leak proof etc. comp. as directed by Engineer in charge

Quantity3

Rate-

Amount -

Quantity504

Rate-

Amount -

Pushing Work Laying 1.8 m. dia. RCC NP4 pipe (by Pushing method) of required length including open excavation for thrust bed necessary form work, concreting, curing, vibrating , pushing etc. complete as per contractor's own design approved by competent authority based on approved GAD by competent authority. The item includes (a) Providing and laying M-25 grade for cast in situ thrust bed and thrust wall with necessary excavation with shoring and strutting, formwork, curing, vibrating as per contractor's own design approved by Authority. (b) Providing and fixing TMT-Fe-500 bars including thrust bed and thrust wall including supplying, cleaning, cutting, bending and placing in position, lapping, binding with 16 SWG soft iron wire irrespective of locations and levels (c) Providing front shield, intermediate shield, jointing, jacking rigs, sliding channels spacers etc. All the structural steel used except intermediate shields will be ownership of contractor after pushing work is completed. (d) Pushing with hydraulic jack without disturbance to pavement including all necessary excavation for thrust bed and thrust wall, necessary shoring and strutting required, necessary dewatering required if any, excavation within the Pipe with all necessary refilling upto ground level after pushing work completed including carting of extra earth upto a lead of 5 Kms. This also includes necessary labour cost for pushing and including necessary cost of hydraulic pipe and oil for hydraulic jacks including necessary depreciation cost of jack. (e) Applying 2 coats of approved quality epoxy painting on precast units after casting work completed including necessary groutings with cement between two precast units after pushing work is completed.

Quantity60

Rate-

Amount -

Excavation for pipeline trenches with shoring & strutting if required as per required gradient and line including all safety provision using site rails and stacking excavated stuff including up to all required lead cleaning the site etc. complete for all lift and strata as specified. In all sorts of Soil and soft murrum. (i) For depth upto 1.5 m.

Quantity51

Rate-

Amount -

(ii) For depth greater than 1.5 m upto 3.0 m

Quantity51

Rate-

Amount -

(iii) For depth greater than 3.0 m upto 4.5 m

Quantity51

Rate-

Amount -

(iv) For depth greater than 4.5 m upto 6.0 m

Quantity14

Rate-

Amount -

Construction of chambers built in RCC M30 with OPC cement with TMT Fe-500 reinforcement, PCC 150 mm thick in M 15, RCC M30 for wall, base slab and top 'slab, including formwork etc. complete. Concrete 'work should be fair finish. PCC (M-15)

Quantity6

Rate-

Amount -

RCC (M-30) i) Top Slab

Quantity9

Rate-

Amount -

ii) Bottom Slab

Quantity9

Rate-

Amount -

iii) Wall

Quantity27

Rate-

Amount -

Reinforcement TMT Fe-500

Quantity5.63

Rate-

Amount -

Providing and applying 15 mm thick cement plaster in single coat on brick / concrete work for interior plastering upto floor any level finished even and smooth in Cement mortar 1:3 (1 cement : 3 sand) including racking out joint curing, scaffolding required if any, with necessary cement finishing etc. complete as directed.

Quantity120

Rate-

Amount -

Providing and laying cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including finishing with a floating of neat cement etc. complete laid in one layer finished including necessary curing and with ordinary portland cement. 40 mm thick.

Quantity43

Rate-

Amount -

Quantity2

Rate-

Amount -

Providing and fixing water tight construction or expansion joints 150 mm. dia. Wide thin ribbed PVC.

Quantity20

Rate-

Amount -

Quantity40

Rate-

Amount -

Providing and supplying lSI Standard R.C.C. pipes (OPC) in standard lengths of following class and diameter suitable Collar joints or rubber rings joints including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to departmental stores, stacking etc. complete. (IS - 458/ 2021) 'Note : One rubber ring should be supplied with each full length socketed pipe, cost included in rates below. 'RCC NP4 Pipe (with OPC Cement) 1800 mm dia.

Quantity60

Rate-

Amount -

Designing, Manufacturing, Lowering in pipe, Laying and Jointing MS pipe as well as MS specials in accordance of IS:5822-1994 or its latest edition in suitable lengths from MS plates (plates shall be as per IS : 2062-1992 or its latest editin of Grade 'B'-Fe 410), as per IS : 3589-1991 or its latest edition including cutting, bending of plates to the required shapes,welding by Submerged Arc Welding, having joints with bevelled ends including ultrasonic and Radiographic at random including inside zinc epoxy paint in two coats and 40 mm thick guniting on outside in CM (1:3) under pressure with reinforcement as per IS 1566 including mixing,curing etc. and hydraulic testing and tolerances for outside diameter of pipe shell. Circularity test as per IS : 3589-1991 and all other required tests, carting to the site of coating and unloading, stacking, etc. including all taxes, duties, local taxes etc. complete, as required. '1219 mm Outside diameter with 10.0 mm thick MS plate

Quantity30

Rate-

Amount -

Refilling the pipeline trenches including ramming, watering, consolidating desposal of surplus stuff as directed within a radius of 3 km.

Quantity83

Rate-

Amount -

Providing and fixing plastic moulded reinforced steps with 10 mm TOR steel bar with plastic polyproclene (P.P.) material (vergin) etc complete.

Quantity33

Rate-

Amount -

Pipeline Bridge for laying 1200 mm dia Rising main on dholka Branch Canal Carry out complete alignment grid survey work by total station along bridge alignment including marking of center line of alignment, taking ground level details of existing structures, details of all machineholes, catch pits, pipe line, valves, light poles, trees, overhead electrical lines, BSNL section pillar / box, Torrent electrical boxes, PMT including number marked on them, road dividers, footpaths, etc. within 40 m from center line and providing, fixing necessary reference pillars, establishing bench mark, establishing foundation layout on ground, including submission longitudinal section, cross section and drawing report of survey work in three hard copies with soft copy in CD to Engineer-in-charge as directed.

Quantity1

Rate-

Amount -

Carryout soil investigation work including drilling 150 mm dia bore holes in all sorts of soil, ordinary rock and hard rock, up to maximum depth as mentioned, collection undisturbed samples and conduction standard penetration tests alternate at an interval of 1.5 to 2.0 m depth, conducting necessary laboratory tests for all type of classification and determination of soil parameters if required, including submission of report in three copies covering investigation data and recommendation for SBC and the pile capacity considering the design criteria, all per specification.

Quantity50

Rate-

Amount -

Demarkation of road alignment including marking out road line by providing and fixing wooden pegs or steel rod of required size at every 25 M to 50 M. including excavating trenches ion both sodes of 0.30 m. x 0.30M. including supplying of labours and all materials for every work etc. complete.

Quantity0.06

Rate-

Amount -

Dismantling of Structures (Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres)By Mechanical Means for items Prestressed / Reinforced cement concrete grade M-20 & above.

Quantity10

Rate-

Amount -

Providing temporary barricade including all road safety devices on both sides of flyover and arrangement for traffic diversion such as traffic signals, traffic marshals during construction at site, for day and night as per technical specifications and drawings. Temporary barricade shall be of plain MS sheet 1.5mm thick fixed with steel frame as per drawing, painting (including primer of approved quality) with synthetic enamel paint of approved color, quality and brand, writing lettering and logo of AUDA including maintenance of the same duly cleaning the same on fortnightly basis and painting as required, arrangement for blinker lights on barricades during night as per requirement and as per the instruction of the engineer. Barricading should be rugged. During the construction, barricading has to be kept continuously. Nothing extra will be paid for dismantling and re-erecting the barricades for other location of flyover and for the purpose of road widening/diversion/resurfacing, utility identification/diversion etc.There should not be any opening at the end of barricade except at locations approved by Engineer. Note: (i) Barricades on either side shall be measured individually. (ii) Once barricade has been provided and work started, removal of barricade will not be permitted till completion of pile, pile cap, pier and pier caps, portal beams, segment erection, I girder, erection, till completion of entire superstructure. (iii) While erecting barricade, the bottom gap between barricade and road should be plugged with cement concrete from inside, where required. (iv) There should be minimum openings at the end of barricade to allow access of trucks / lorries and machine to site work area. Even these spacing should have proper opening & closing arrangements. (v) For 2.0m barricades adequate blinking lights on barricade during night time must be ensured. The cost of this item should include provision for power pack / Genset etc. so as to ensure the blinking of lights in night time as long as barricades are in position at the work spot. (vi) After completion of the entire work, the barricades shall be the property of the contractor. (vii) If the cleaning is not done including removal of posters regularly, a recovery shall be made at the rate of 0.1% of the accepted rate of item per fortnight on prorata basis of length not cleaned. (viii) The rates should be all inclusive for shifting/erecting/re-erecting the barricade for utility diversion/identification & road widening/diversions. (ix) The barricading shall be provided as per Item, Specification, Drawing, only. Any type of change / modification will not be allowed without written permission of Engineer In charge , and in such case rate reduction will be imposed based on allowed barricading with written permission for specific area with valid reason. (x) Barricading of height 2.0m height as per tender drawing . Payment shall be made at 70% on erection of barricade and 30% on removal of barricade as per the instructions of Engineer. (xi) It is specifically highlighted that barricading provided during construction shall be limited to 1m to 2m from outer edge of structure to be constructed. Barricading of height 2.0 m height as per GFCD. Payment shall be made at 70% on erection of barricade and 30% on removal of barricade after completion of project as per the instructions of Engineer.

Quantity30

Rate-

Amount -

Excavation for foundation in sand, gravel, clay soft soils and murrum etc. including shoring, strutting dewatering as necessary and disposing of the excavated stuff as directed.(A) Depth upto 3.0 M. and lead upto 100m for 10 Cum.

Quantity120

Rate-

Amount -

Providing and filling in foundation with ordinary Cement concrete M15 mix and providing necessary vertical pin headers including formwork, vibrating, ramming and curing complete.

Quantity10

Rate-

Amount -

Empty boring through all sorts of strata for providing R.C.C. bored piles to required depth including providing necessary casing pipe with all plants and equipments as required complete. For 750 mm dia.

Quantity330

Rate-

Amount -

Providing and laying controlled cement concrete M35 for R.C.C. bored piles including ramming, vibrating, curing and finishing complete.

Quantity150

Rate-

Amount -

Carrying out High strain Dynamic Test on any working pile / Test pile as selected by the Engineer-in-charge. The test shall be carried out by agency approved by engineer in charge as per IRC-Notification 54 and submitting results / reports in three hard copies with soft copy in CD. Item includes all necessary arrangements required for the test. (with guided frame arrangement) as directed by engineer in charge.

Quantity1

Rate-

Amount -

Performing Integrity Test (low strain) on all vertical pile. The item shall include chipping of weak concrete at the top of pile, leveling, bending of reinforcing bars, preparation of pile head including testing with pile driving analyzer or approved equivalent. To be carried out at least 15 days after concreting of piles. A specialist approved Agency shall be employed by the Contractor for the test. The test shall be carried out as per relevant ASTM code. The item is including complete testing with approved apparatus, analysis of results and conclusions including submission of test reports in three hard copies with soft copy in CD. as directed by engineer in charge.

Quantity6

Rate-

Amount -

Supplying, fabricating and placing in position MS liner made of 6 mm thick MS plate for cast-in-situ concrete piles including all operation such as straightening, cutting, bending to shape, welding, fabricating, driving, placing in position, applying protective coating, etc. complete as per specification. Depth of liner shall be decided by Engineer-in-charge as per site condition.

Quantity10

Rate-

Amount -

Providing and casting in situ controlled cement concrete M30 for R.C.C. pile cap including necessary formwork, vibrating, curing and finishing complete.

Quantity60

Rate-

Amount -

Providing and laying controlled cement concrete M25 for foundation and superstructure (above plinth level) with vibrating, curing etc. complete including the cost of form work but excluding the cost of reinforcement for RCC work etc. complete at any height, 'as directed. ( Thrust Block )

Quantity80

Rate-

Amount -

Providing and casting in situ controlled cement concrete M30 bed blocks or pedestals and Seismic Restrainer of required size below bearings as per detailed drawings, centering, shuttering, scaffolding, wherever necessary, laying vibrating, curing and finishing complete.

Quantity20

Rate-

Amount -

Providing and fixing in position fully moulded restrained elastomeric Bearings as per detailed drawings.

Quantity107520

Rate-

Amount -

Providing and applying Coal Tar Epoxy protective paint for Pile Cap in two coats of DFT 210 microns for foundations /concrete surfaces in contact with soil complete as per Specifications and as directed by the Engineer including all leads and lifts etc. complete.

Quantity100

Rate-

Amount -

Providing and casting in situ controlled cement concrete M-35 for average 75 mm thick wearing coat laid as directed dincluding tamping, vibrating, finishing, curing and fillingin joints with bitumen complete. (more than 10 ton)

Quantity20

Rate-

Amount -

Quantity36320

Rate-

Amount -

Providing and fixing in position (Thermo mechanically Treated bars) TMT Fe500 D conforming to IS 1786 reinforcing bars of various diameters. For Pile

Quantity27

Rate-

Amount -

For Pile cap

Quantity9

Rate-

Amount -

Thrust box

Quantity12

Rate-

Amount -

Wearing coat

Quantity2

Rate-

Amount -

ELECTRO-MECHANICAL AND INSTRUMENTATION WORKS FOR SWPS AT SHELA POND SEWAGE SUBMERSIBLE NON CLOG PUMP-MOTOR SET Supply, Installation, Testing and Commissioning of Submersible NC Pump-Motor set suitable for sewage application with semi-open or suitable type Impeller & wear Rings in CF8M with CI FG 260 Casing & casing cover, SS 410 shaft & with motor suitable for 3-Phase, 415 V, 50 Hz., AC induction Air filled dry type submersible motor of mini. rating as specified having max. 1000 RPM sync. speed, insulation Class 'F' With temp. rise limited to class B and IP-68 protection. The scope shall include all required accessories viz. automatic coupling device, SS-304 heavy duty & of suitable size double guide pipes of length to suit the sump height with required supports, SS-304 or suitable stainless steel grade Chain with shackles (shall be with dual hook / shackles of 300 mm or suitable higher size at app. every 1.5m C-C distance) & of length as per sump height + min. 3m, Submersible Power & control cable (copper flexible & stranded type conductor of reqd. cores & size for each pump motor set) & length of sump height + min. 20 m long each run with necessary electrical termination connection at junction box / starter panel and RCC foundation blocks for auto coupling & delivery bend & suitable to install pump set in new sump, PMU etc. complete as per IS, Tender Drawings and Specification and also including in scope any other parts / accessories / fittings required to complete the work in all respects & satisfactory operation of pump set. Pump Capacity: 2400 m3/hr, Head: 20 m Motor Rating: 200 kW mini. (or higher standard rating as reco. by pump manufacturer) Over all Efficiency at Duty: min. 75.0 %

Quantity4

Rate-

Amount -

VALVES Supply, installation, testing & commissioning of Non slam, flanged, Multi door, swing type Non Return Valve conforming to IS 5312, Part 2 having pressure rating PN 1.0, having C.I. body and doors, CF8M seat rings alongwith all necessary hardwares, bolts, nuts & washers, gaskets, etc. as per specification and complete in all respect. Size: 700 mm NB (At Delivery of each Pump)

Quantity4

Rate-

Amount -

Supply, installation, testing and commissioning of Manual Gear operated Horizontal shaft CI DF Butterfly Valve, conforming to IS 13095 / BS EN 593, PN 1.0 with SS 304 renewable seat rings, indicator, gear box with bolts, nuts & washers, gaskets, etc. as per specifications and complete in all respect. Size: 700 mm NB (at Delivery of each pumps)

Quantity4

Rate-

Amount -

Item Description as per 2.1.1 and of following size complete in all respect. Size: 1000 mm NB (at Header after Flow Meter)

Quantity1

Rate-

Amount -

Supply, installation, testing and commissioning of Flange ends Expansion Bellow (PN 1.0) as per EJMA standards and as per specs. and complete in all respect. Size: 700 mm NB x 300 mm (L) (at Del. of each pump)

Quantity4

Rate-

Amount -

Item Description as per 3.1.1 and of following size complete in all respect. Size: 1000 mm NB x 300 mm (L) (at header near BFV)

Quantity1

Rate-

Amount -

CI PIPES Supply, installation, connection, testing and commissioning of double flanged delivery and header CI pipes conforming to IS 1536 / 1537, Class B with connection and complete in all respect. Size: 700 mm dia. & above

Quantity30600

Rate-

Amount -

CI FITTINGS & SPECIALS Supply, installation, connection, testing and commissioning of Flanged delivery and header CI Fittings and Specials like 90 deg. Bend, Blind Flanges, Reducer / Enlarger, Duck foot bend, TEE, etc. conforming to IS 1538 and complete in all respect. Size: 700 mm dia. & above

Quantity11850

Rate-

Amount -

MS PIPES & SPECIALS: Supply, Gas cutting of pipe, Fabrication, welding, Installation, testing and commissioning of MS pipe & Specials, reducer, expander, bend, Y-Joint, TEE etc. conforming to IS 3589 & flanges confirming to IS 6392-PN-1.0, fabricated from MS. plate with necessary supports & anchoring. Pipe fabricated from MS plate. (Excluding supply of flange) Size : 1200 mm NB X min. 10.0 mm Thk

Quantity1

Rate-

Amount -

Supply, welding , Installation, testing & commissioning of MS flat machined faced flanges confirming to IS 6392 & drilled as per IS-1538 with drilling off centre bolt holes and flange thickness as per PN 1.0 including cutting & welding. Size : 1200 mm NB-Drilled

Quantity1

Rate-

Amount -

Flanged Joints of Pipes, Fittings and Specials: Supply, Installation, Making of Flanged CI / GI / MS Pipes, Fittings and Specials Joints with all jointing materials, rubber packing, nut bolts, labour etc.for complete connection. Size: 500 mm dia (or as per actual Pump Del. Flange)

Quantity4

Rate-

Amount -

Item Description as per 4.3.1 and of following size complete in all respect. Size: 700 mm dia

Quantity32

Rate-

Amount -

Item Description as per 4.3.1 and of following size complete in all respect. Size: 1000 mm dia

Quantity13

Rate-

Amount -

Item Description as per 4.3.1 and of following size complete in all respect. Size: 1200 mm dia

Quantity1

Rate-

Amount -

SLUICE GATE Supply, installation, testing and commissioning of Manual Gear Operated C.I. Sluice Gate conforming to AWWA C 501 or IS : 13349 - 1992 Class - 1 with rising spindle, single faced, wall thimble mounted, handwheel, flange back frame, head stock, Spindle with supports brackets having length as specified or to suit site condition, suitable for seating as well as unseating water head and as per specifications and complete in all respect. Size : 1600 mm X 1600 mm - approx. 8.3 m spindle length (at Inlet Pipe) - Conventional Bottom Closing or suitable Closing

Quantity1

Rate-

Amount -

BOX TYPE MANUAL MESH SCREEN Supply, Installation, Testing and Commissioning of Box Type Manual mesh Screen having following size, made of SS 304 material having round bars of size 9 mm dia. with clear bar opening as specified here below, suitably welded in outer frame of equal Leg SS angle of size 50 mm x 50 mm x 6 mm thick or higher, with intermediate support at required locations, complete as per specs. & shall also including followings: The screen shall be with SS perforated Screening Material Collection Box at bottom end of Screen having size as specified, fabricated from 3 mm thk. SS sheet, screen shall be suitable to slide complete screen through rollers between existing guide channel of MCP 400, embedded/ fixed in wall on both sides of RCC wall up to top of chamber with all necessary hardware, SS nuts, bolts & washers, sacrificial Brass lugs on sides, min. two lifting lugs/hooks & SS lifting chain having intermediate link/chain of 300 mm dia. or suitable higher size at every 1.5 m distance with shackle, etc. complete in all respects and provided with 1 set of cleaning rake with each screen complete as per specification and complete in all respect. Screen Size: 2200mm (W-or as per actual site) x 2200mm (H) x 300 mm (D) Screening Box size: 300 mm height with width & depth as per screen Opening: 50 mm x 50 mm sq. opening. (w/o Guide channel & MS supporting structure) (Note: Screen suitable for 2300 mm chamber width or to suit site requirement.)

Quantity1

Rate-

Amount -

SINGLE GIRDER EOT CRANE: Providing and errecting Single girder type E.O.T. crane with electrically operated hoist, class II duty, geared travelling trolly with lift as specified here below complete with long travel rail track (40 sq.mm. bar), moving or cross girder, all three motions electrically operated by suitable rating motor IP54, control panel, & down pendant control block, brake, safety device, cables from motor to starter panel & other required accessoaries & manufactured and tested as per IS-807, IS-3938 & IS-3177, class-II, complete as per IS & Specifications. Capacity: min. 5 Ton, (at Pump House) Span: App.8.5 m (or as per site) Lift: 14.0 m or (or as per site) Bay length: App. 12 m (or as per site) Note: Minimum as specified capacity or higher as per requirement such that EOT crane capacity is min.1.25 times of the pump set or single heaviest component to be lifted within pump house.

Quantity1

Rate-

Amount -

MONORAIL EOT WITH ELECTRIC CHAIN HOIST Supply, installation, testing & commissioning of Electrically Operated Chain Hoist & Electrically operated Trolley, suitable to operate on Mono Rail Girder having motorised motion in vertical lifting & cross travel, manufactured as per IS:6547-1972-Class-II & IS-3177- Class-II, complete with electrically operated chain hoist & Electically operated geared trolley, brake, chain-gear, motors, safety device, pendant push button, starter panel, cables from motor to starter panel and all other required accessories like limit switches, panel, power supply system (Fastoon cable type), fasteners, epoxy painting, etc. tested for over load as per IS complete as per specifications and complete in all respect. Capacity : 1 Ton. Min. (at Inlet chamber) Lift : 11.00 m as mini. or as per site req. Bay Length: 6.0 m min. or as per site req. (w/o MONORAIL GIRDER & MS supporting structure) Note: (1) Minimum as specified capacity or higher as per requirement such that ECH capacity is min.1.25 times of the screen or single heaviest component to be lifted within Inlet chamber.

Quantity1

Rate-

Amount -

PORTABLE DEWATERING / DESILTING PUMP Supply and testing of Submersible non clog Portable Dewatering Pumpset with C.I. casing & CF8M impeller, 30 m flexible PVC delivery hose pipe of pump delivery size, rated for 6.0 kg / cm2 presure, 15 mtr SS lifting chain, 20m pair of cable for motor to starter panel, suitable for 3Phase, 415 V, 50 Hz AC supply and min. motor rating as indicated here below, Switch-Starter panel with PMU suitable inter lock for winding protection, moisture controller for fault detection and auto stop facility, with buit-in level switch for dry run protection and auto stop facility, 20 m suitable size power supply cable to starter panel, GI/CI pump stool and other required accessories for wet well. Capacity : 25 m3 / hr. Head : 15 m Motor Rating: Mini. 3.7 kW (or higher rating as reco. by pump manufacturer)

Quantity1

Rate-

Amount -

Providing, Supply of Structure Steel at site of work with freight, loading, unloading carting, etc. including all taxes and duties complete such as joints, channels, angles, Iron Rails, ISA/ISMC/ISMB/MS flat, Plates, Chequered plates (below 10mm thickness) for cable trench etc. required for support structure of all Electro-mechanical equipment, piping, etc. for support on floor / wall / beam / brackets etc. as per tender and IS.

Quantity2000

Rate-

Amount -

Labour Charges for lowering, laying, Fixing with fabrication various size section of MS such as joints, channels, angles, Iron Rails, ISA/ISMC/ISMB/MS flat, Plates, Chequered plates, for cable trench etc Complete with two coats of red oxide and two coats of approved colour shade of epoxy paint as per relevant IS and as per specification.

Quantity2000

Rate-

Amount -

ELECTRICAL WORK: 11 kV SWITCHYARD / TWO POLE (DP) STRUCTURE: Supply, Installation, Testing and Commissioning of 11 kV, 3 Phase, 50 Hz, Two Pole Structure made of 6" X 3" 'I' section girder having min. 9mtr. length, 4" X 2" M.S. channels, angles, clamps, nuts, bolts, stay wires including earthing system etc. suitable for erection of following / indicated accessories duly connected with ACSR conductor as per approved drawings & in compliance with requirements of IS/IEC / Power Supply Co.: (a) 11kV 200A DO (drop out) fuses with S.R.B.P. tubes carries (03 nos.) (b) 11kV 400A G.O.D. switch complete with insulators, operating handle with galvanized pipe, square bar etc. (01 set) (c) 11kV lightning arrestors with clamps (03 nos.) (d) 11kV shackle (Disc/Pin/Post) as required insulators (06 nos.) (e) ACSR Dog Conductor (mini. 30Mt.) (f) 11 kV fiber operating rod (g) 20 mm dia. GI stay sets (2 sets), required foundation etc. and to be painted with two coat of red oxide and final two coat of Aluminium paint at site as per IS, Specification and Drg.

Quantity1

Rate-

Amount -

H.T. INDOOR SWITCH GEAR PANEL SITC of 11 kV, 500 MVA, 630A, Indoor, Extensible type, Horizontal draw out, Motorised spring charging mechanism, 3 breaker Vacuum Circuit Breaker Panel (1 No. Incomer + 2 Nos. outgoing), with EC grade copper busbars along with required Resin cast CT Dual primary & secondary, Cl: 0.5/5P10, 15VA, Digital MFM with RS 485 with 3 Line Display, Class-0.5s and PT (dual secondary) Cl:0.5/3P, min 200VA or higher for metering and protection, 110V DC power pack for individual incoming and outgoing feeder, Annunciator, Hooter, Indicating lamps, Numerical Protection relay (Current & Voltage Based) with RS 485 with combined protection for 3O/C+1E/F, S/C, Under & Over Voltage, Tfr. Protection Aux. relay etc. High speed tripping relay, Trip ckt supervision relay, Fuse failure relay, Digital Power factor meter, Ammeter, Voltmeter (Only I/C), A/M switch suitable for PLC/SCADA etc. complete in all respects as per IS, Specification.

Quantity1

Rate-

Amount -

SITC of H.V. CABLES SITC of 11 kV (E), 3C x 240 sq.mm., Aluminium, extruded innersheath, Armoured, XLPE , H.V Cable as per IS 7098 (part 2) and Tech. Specification. (DP Structure to HT Panel, HT Panel to TFR 1 & 2)

Quantity100

Rate-

Amount -

SITC of the Indoor Heat shrinkable Termination: SITC of Indoor H.T. cable end terminations Kit for 11 kV (E), 3C x 240 sq.mm. XLPE armoured cable with all accessories as required.

Quantity5

Rate-

Amount -

SITC of the Outdoor Heat shrinkable Termination: SITC of Outdoor H.T. cable end terminations Kit for 11 kV (E), 3C x 240 sq.mm. XLPE armoured cable.

Quantity1

Rate-

Amount -

DISTRIBUTION TRANSFORMER SITC of 1000kVA, 11/0.433 kV, Outdoor Transformer continuously rated, 3-phase, 50 Hz, OCTC, ONAN cooled, copper double wound core type, vector group Dyn11, Delta(HT)/Star(LT), Oil immersed winding with temperature rise in oil / winding 40/45 deg.C above design temperature with neutral brought out to connect to separate earthing including Terminal arrangement bushing / cable Box on HT side and cable box on LT side, first fill of oil along with Fittings & accessories as per Energy Efficiency level-1 of IS:1180 (Part-1):2021 and its latest amendments etc. and Tender Specification. Note: Transformer shall be suitable for parallel operation. Minimum requirement shall be as below: Both transformer shall have " Identical X/R ratio, phase angle shift, polarity, phase sequence, frequency, position of tap changer. Turns ratio & voltage ratio".

Quantity2

Rate-

Amount -

Supply and levelling of Transformer yard using gravel, fine sand and other required filing material, enmarked for the Transformer yard including removing of trees or boulders etc. if any. The general level of the yard shall be at a convenient level for movement of man and material and it should match with FGL and as per Specification and Drg.

Quantity70

Rate-

Amount -

Supply and Installation of GI Chain link fencing frames with L angle/Channel post around Transformer yard etc. as per Specification and Drg.

Quantity30

Rate-

Amount -

SITC of 3.0 mtr wide gate with GI chain link as per Specification and Drg.

Quantity2

Rate-

Amount -

LOW VOLTAGE (LT) PANEL BOARD (PMCC) : SITC of PMCC Panel (50kA), compartmentalized, Stand mounted, operating height maximum 1800/1900 mm, Extensible on both ends, suitable for Manual & Auto operation -Local & through PLC/SCADA operation as per site conditions complete in all respects as per Tender SLD / Specification / IS and including following as minimum: (1) INCOMER 1&2: FP, 1600A, 50 KA Microprocessor EDO ACB LSIG with inbuilt RS 485 MODBUS communication with Digital Voltmeter with VSS, Digital PF Meter, Digital Ammeter with ASS, Resin Cast CT- Cl : 0.5,10VA, Digital MFM with RS-485 Cl. 0.5, Breaker Control Switch (TNC), A/M, L/R switch, Indicating lamps, Push buttons etc,. with electrical & mechanical interlocking between Incomers and buscoupler. (1.1) Surge protection device, 3P + N, Type 2 for lightning/surge protection. Load sensing CT in Incomer & Busbar for APFC panel along with 2 nos. Resin cast Summation CT 5A+5A/5A, Cl.-0.5. Constant voltage/control voltage transformer 1500VA, 415V/230V AC, with tapping +/-5% in steps of 2.5%, 32A DP MCB & 25A Power contactor. (2) BUS-COUPLER: One no. FP 1600A ACB (same as per Incomer) (2.1) 1600A TPN, EC grade AL Main busbars. (Busbars size as per 50KA fault level and Temperature rise with current density 0.8A/Sq.mm) (3) TRANSFORMER FIXED COMPENSATION FEEDER (45 KVAr): 2 Sets: Each comprising of 125A FP Thermal magnetic MCCB, Ind. Lamp, with Capacitor duty contactor,ON Delay timer, individual MCCB/MCB as per Tender SLD. (4) SOFT STARTER FOR 200 KW MOTOR : 4 NOS Each feeder comprising of Soft Starter with Internal/External bypass contactor for 200 kW Motor or higher as per pump manufacturer reco. with soft starter rating minimum (383A @ 50deg C) with suitable derating with detachable type door mounted display key pad and with 630A TPN microprocessor MCCB LSIG, 550A, AC3 duty Line contactor, Semi conductor fuse, Digital MFM with RS-485 Cl. 0.5, Digital Ammeter,ASS, Resin Cast CT Cl: 0.5, PMU,Temperature Scanner with RS-485, SPP, A/M, L/R switch, Indicating lamps, Push buttons etc. (5) 270 KVAR APFC POWER FEEDER: 2 NOS: Each feeder comprising of 630A TPN TM ACB, 50kA with Digital Ammeter, ASS, CT, Indicating lamp, etc.complete in all respects. (6) 63A TPN TM MCCB FEEDER : 2 Nos. (2 nos. Spare) Each feeder comprising of 63A TPN Thermal Magnetic (TM) MCCB, with indicating lamp etc. (7) 32A TPN TM MCCB FEEDER : 3 Nos.(1no. Desilting Pump, 2nos. spare) Each feeder comprising of 32A TPN Thermal Magnetic (TM) MCCB, with indicating lamp etc. (8) 63A TPN TM MCCB FEEDER FOR ALL MCB FEEDERS: 2 sets: Incomer: 63A TPN Thermal Magnetic (TM) MCCB, with indicating lamp etc. 8.1) 8 nos. 32A 'C' curve 4P MCB feeders (for 1no. Ind LDB, PLC Panel, 2nos. EOT & 4 nos. spare feeders) 8.2) 1 nos. 32A 'C' curve 4P MCB with Time switch,32A contactor 4P,ON lamp feeders (for Outdoor LDB) 8.3) 4 nos. 16A DP MCB feeders (for single phase supply for 2nos. X'mer marshaling box, HT Panel & Spare.) (9) Multiplication relay as required for dry run protection of pumps. NOTE: 1). All MCCB shall be 50KA, Ics = 100% Icu, inbuilt protection with adj O/L and Adj.S/c (LSIG for MP MCCB),Extended rotary handle, Terminal spreader, Auxiliary Change over contact and trip contact as required.2) All MFM, ACB, Soft Starter,MPR,Temp.Scanner etc shall be with inbuilt RS 485.

Quantity1

Rate-

Amount -

SITC of 270 KVAR at 415V, APFC Panel,compartmentalised, Stand mounted, extensible type on both sides with Horizontal bus bar arrangement as per site requirement & complete in all respects as per SLD / Specification / IS and including following as minimum: (1) INCOMER: 1.1 630A, TPN, 50 KA TM ACB LSIG with Digital Voltmeter with VSS, Digital Ammeter with ASS, Resin Cast CT- Cl : 1.0,10VA, Breaker Control Switch (TNC), A/M, L/R switch, Indicating lamps, Push buttons etc. 1.2 Microprocessor based APFC Relay,144sq.mm, 16 STEP with RS 485 with minimum operating current 10mA. 2. OUTGOING CAPACITOR FEEDER: Capacitor feeder of following rating comprising of TPN MCCB/MCB with ON & TRIP Indication, Capacitor duty contactor,Heavy duty MPP / gas filled capacitor unit, A/M Switch, ON Delay timer,ON / OFF Push button, ON, TRIP, Auto & Manual Indication lamp etc. as per Tender SLD& Specification 2.1 50 KVAR FEEDER: 4 NOS 2.2 20 KVAR FEEDER: 1 NO 2.3 10 KVAR FEEDER: 4 NOS 2.4 5 KVAR FEEDER: 1 NO 2.5 2 KVAR FEEDER: 2 NOS 2.6 1 KVAR FEEDER: 1 NO 2.7.Two nos. Vacant feeder suitable for 1-50KVAr and 1-20KVAr to be provided. NOTE: 1. cooling/exhaust fan : Heavy duty 8" Metalic Housing and Metal Impeller / Blade / Vanes of Minimum2nos. or higher as required at the top of the panel with canopy/hood. 2. For Capacitors of rating ≤ 5 KVAr only, All types viz. APP/MPP/Gas Filled are acceptable.

Quantity2

Rate-

Amount -

SITC of Lighting Distribution Board (LDB) as under: SITC of 3 Phase 4 Wire 4P, double door Prewired LDB each for Indoor Lighting & Outdoor Lighting Suitable to house : Incoming: 32A FP, ELMCB (30mA) Outgoing: 20A SP MCB (9 nos.) & 16A SP MCB (9 nos.)

Quantity2

Rate-

Amount -

LOW VOLTAGE (LT) CABLES Supply, laying, testing and commissioning of 1.1 kV, A2XFY(X)/2XWY(X) XLPE insulated (IS 7098) AL / Cu stranded conductor, Extruded innersheath cables as per specification & IS. The cable when laid outside the building shall be laid underground in trench with brick & sand protection/in DWC pipes as per specified method and shall be laid in prepared trench/ on cable tray when laid inside the building. SITC of 3.5C x 300 sq. mm. A2XFY(X) Cable (6 Runs/ incomer -TFR to PMCC Panel)

Quantity430

Rate-

Amount -

3.5C x 240 sq. mm. A2XFY Cable (2 Runs for PMCC to APFC Panel)

Quantity90

Rate-

Amount -

4C x 6 sq. mm. A2XFY(X) Cable (For 1no. Indoor LDB, Outdoor LDB, 1no. Portable Desilting Pump Panel, WR-DB with TPN MCB at Pump House)

Quantity120

Rate-

Amount -

4C x 2.5 sq. mm. 2XWY/2XFY(X) Cable (For 1no. TPN MCB for Elect. Crane at Pump House, for ECH at Screen, 1no. Portable Desilting Pump, PLC Panel & for 6 nos. street light)

Quantity330

Rate-

Amount -

2C x 2.5 sq. mm. Multi strand 2XWY(X) Cable (For HT Panel, for 2nos. APFC CT & X'mer marshaling box Single Phase Supply)

Quantity150

Rate-

Amount -

10C x 1.5 sq.mm. 2XWY(X )Cable (2Run Tr. to HT Panel control cable)

Quantity120

Rate-

Amount -

CABLE END TERMINATION AND CONNECTION: SITC of Double compression Ni-Plated brass cable glands and crimping type Bimetallic lugs / sockets with necessary tools and equipments as specified in specifications and IS. The glands and lugs / sockets shall be suitable for cable size and type mentioned below & as per specifications. 1) Earthing the glands and armouring with earthing clamp and jumper and also connecting to common earth bar. 2) The job also includes, if necessary, supply & fixing of extension busbar of same material on MCCB or panel board terminal / connector to connect more than one no. of parallel cables or to connect higher size cable to lower size unit. The job also includes earthing the glands and armour of the cable with common earth bar or flexible copper mesh.(Cable termination qty. shall be as per site requirement) (3.5C x 300 sq. mm. A2XFY(X) Cable (6 Runs/ incomer -TFR to PMCC Panel)

Quantity24

Rate-

Amount -

3.5C x 240 sq. mm. A2XFY Cable (2 Runs for PMCC to APFC Panel)

Quantity8

Rate-

Amount -

4C x 6 sq. mm. A2XFY(X) Cable (For 1no. Indoor LDB, Outdoor LDB, 1no. Portable Desilting Pump Panel, WR-DB with TPN MCB at Pump House)

Quantity8

Rate-

Amount -

4C x 2.5 sq. mm. 2XWY/2XFY(X) Cable (For 1no. TPN MCB for Elect. Crane at Pump House, for ECH at Screen, 1no. Portable Desilting Pump, PLC Panel & for 6 nos. street light)

Quantity20

Rate-

Amount -

2C x 2.5 sq. mm. Multi strand 2XWY(X) Cable (For HT Panel, for 2nos. APFC CT & X'mer marshaling box Single Phase Supply)

Quantity10

Rate-

Amount -

10C x 1.5 sq.mm. 2XWY(X )Cable (2Run Tr. to HT Panel control cable)

Quantity8

Rate-

Amount -

CABLE TRAY SITC of G.I. (hot dip galvanised )Ladder type medium duty (2mm thick) Cable Tray with necessary bends, tees, reducers, covers and clamps for fixing. All material shall be Hot dip galvanised as per Specification. And including all accessories. 700 x 100 mm - Ladder type

Quantity20

Rate-

Amount -

300 x 100 mm - Ladder type

Quantity25

Rate-

Amount -

150 x 50 mm - Ladder type

Quantity50

Rate-

Amount -

Supply, laying and erection of 125 mm (ID) approved make Double Walled Corrugated pipes (DWC) of polyethelene (confirming to IS-14930 II) with necessary connecting accessories of same material at required depth for laying of cable below ground / road surface for enclosing cable and back filling the same to make ground as per original. (For HT cable from HT panel to each Tr./ at road crossing, etc. ).

Quantity30

Rate-

Amount -

Supply, laying and erection of 75 mm ID approved make Double Walled Corrugated pipes (DWC) of polyethelene (confirming to IS-14930 II) with necessary connecting accessories of same material at required depth for laying of cable below ground / road surface for enclosing cable and back filling the same to make ground as per original. (LT cable from Transformer to PMCC panel / road crossing etc)

Quantity100

Rate-

Amount -

Making Trench/ excavation in soft soil of suitable width and of depth (minimum 750mm depth (LT) & 1000mm for HT) for laying cable/ DWC pipe and back filling the same and making the surface as normal ground as per IS & Tender Specification/Drg. (For laying of HT/LT cable)

Quantity150

Rate-

Amount -

Cable Protection/ Covering in Trench: Cable Covering with second class bricks or cement tiles laid cover the cable (top) & also on both side with sand bedding/cushioning of 75mm.& covering of 150mm Layer of sand above cable (16 bricks per meter.) as per IS & Tender Drg/ Specification. (For HT/LT cable protection ) complete in all respects as instructed by EIC.

Quantity30

Rate-

Amount -

CHEMICAL EARTHING SYSTEM SITC of Maintenance free chemical earthing (copper) with earthpit of minimum bore size dia. 225mm Safe Earthing Electrode consisting Pipe-in-Pipe Technology as per IS-3043:1987 /Tech spec. made of corrosion free Pipes having Outer pipe dia of 48 mm having 250 Micron copper plating, Inner corrosion free Hot dip galvanised (80 to 100 micron) pipe dia of 26 mm with copper flat strip type connection terminal 14mm dia with constant ohmic value surrounded by highly conductive corrosion resistant chemical compound with high charge dissipation suitable for electrical installation & of 3Mtr. length of Pipe with two nos. 25Kg. bag of Back filling compound.. (2 nos. HT Panel, 2 nos. Each for neutral of Tr.-1 & 2, 2 nos. LA of DP structure, 2 nos. PLC Panel) NOTE: Earthing Resistance value & date shall be painted on the chamber cover.

Quantity10

Rate-

Amount -

SITC of Maintenance free chemical earthing with earthpit of minimum bore size dia. 225mm Safe Earthing Electrode consisting Pipe-in-Pipe Technology as per IS-3043:1987 /Tech spec. made of corrosion free Hot dip Galvanised (min 150 Microns) Pipes having Outer pipe dia of 76 mm , Inner corrosion free Hot dip galvanised (80 to 100 micron) pipe dia of 26 mm with copper flat strip type connection terminal 14mm dia with constant ohmic value surrounded by highly conductive corrosion resistant chemical compound with high charge dissipation suitable for electrical installation & 3Mtr. length of Pipe with two nos. 25Kg. bag of Back filling compound. (2 nos. Each for Tr.1 & Tr. 2 Body, PMCC, 2 nos. DP Structure & all elect. Equipments) NOTE: Earthing Resistance value & date shall be painted on the chamber cover.

Quantity10

Rate-

Amount -

SITC of pipe type earthing having 150 cms long and 2.5cms dia. Galvanised iron pipe with coupling and buch buried in specially prepared earth pit complete with necessary 8 SWG earth wire (For 2 nos. Gate light & 6 nos. street light poles earthing)

Quantity8

Rate-

Amount -

SITC of 50mm(w) x 8mm(T) etc. sizes as required, HOT dip galvanized GI Strip including supply & fixing using GI spacers, saddles when laid inside the building and inclusive of excavation & refilling of earth when laid outside the building & interconnection with earth pit & all electro-mechanical equipments. (50X8 G.I Strip wt.3.12 kg/m, 3.12x100Mt.=312kg.)

Quantity312

Rate-

Amount -

Supply, laying and erection of 25mm(w) x 3mm(T) etc. sizes as required, HOT dip galvanized GI Strip including supply & fixing using GI spacers, saddles when laid inside the building and inclusive of excavation & refilling of earth when laid outside the building & interconnection with earth pit & all electro-mechanical equipments. (25X3 G.I Strip, 0.6 Kg/m, 0.6x30Mt.=18Kg.)

Quantity20

Rate-

Amount -

Supply, laying and erection of 40mm(w) x 6mm(T) etc. sizes Copper Strip including supply & fixing of bolts, saddles when laid inside the building and inclusive of excavation & refilling of earth when laid outside the building & interconnection with earth pit & Tr. neutral. (40X6 Cu. Strip, 1.88 Kg/m, 1.88 x 100mtr.=190Kg.) Copper Bolt,Nuts ,Washers shall be used for Connecting Earth electrode to individual eqp. Bitumen shall be used at the place of joint/welding.

Quantity190

Rate-

Amount -

Supply, laying and erection of 25mm(w) x 3mm(T) etc. sizes Copper Strip including supply & fixing of bolts, saddles when laid inside the building and inclusive of excavation & refilling of earth when laid outside the building & interconnection with earth pit & PLC Panel (25X3 Cu. Strip, 0.761 Kg/m, 0.761 x 20 mtr.=15 Kg.) Copper Bolt,Nuts ,Washers shall be used for Connecting Earth electrode to individual eqp. Bitumen shall be used at the place of joint/welding. ( For PLC Panel Earthing)

Quantity15

Rate-

Amount -

SITC of HOT Dip Galvanized iron strip wire 8 SWG (For LDB, LCS, etc.) (8 SWG G.I Strip, 0.103 Kg/m, 0.103 x 200Mt.=20 Kg.)

Quantity20

Rate-

Amount -

INTERNAL WIRING SITC of Mains & outlet points wiring with 1.1 kV grade FRLS PVC insulated ISI marked flexible stranded copper conductor wires with medium class min. 25mm. dia. Rigid PVC pipe and accessories to be erected concealed in / to be run on surface / wall / ceiling with following sizes as mentioned below. The unit rate wirings shall be with connector, PVC junction box, wires, holder, ceiling rose, angle holder, switch, sockets, switch board, brass chromium / cadmium plated machine screws, phase and neutral wires, green Earth continuity wires etc. as required to complete wiring from LDB panel to the final outlet termination points. The wiring shall be as per IS:732, IS:4648 and as per tender specification / IS. (a) SITC of Mains wiring with 3 wire 1.5 sq.mm.

Quantity100

Rate-

Amount -

As per Sr. No.-9.1 (b) SITC of Mains wiring with 3 wire 2.5 sq.mm as per tender specification & IS.

Quantity50

Rate-

Amount -

As per Sr. No.-9.1 (c) SITC of Mains wiring with 4 wire 1.5 sq.mm as per tender specification & IS.

Quantity50

Rate-

Amount -

As per Sr. No.-9.1 (d) SITC of Mains wiring with 4 wire 2.5 sq.mm as per tender specification & IS.

Quantity50

Rate-

Amount -

SITC of Point wiring for Light / fan / Bell / Primary Point with 2nos. 1.5 sq. mm & earth wire of 1.5 sq. mm (green) both are of ISI marked 1.1 kv grade FRLS PVC insulated multistrand copper wires , pipe to be erected concealed in flushed on wall / ceiling, complete with 6A Tissino Type ISI marked flush type switch / bell push & accessories erected on metal / PVC Box covered with 3 mm thick PC (Polycarbonate) / Acrylic sheet with necessary lamp holder / ceiling Rose / H. D. connector as directed with medium class Rigid PVC pipe & accessories.

Quantity23

Rate-

Amount -

SITC of 6A independent Plug with 2nos. 1.5 sq.mm Cu. Mains size wiring & earthwire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires with medium class Rigid PVC pipe and accessories to be erected on wall / ceiling, complete with ISI marked 3 / 5 Pin socket and tissino type switch erected with earth continuity connection erected on Metal / PVC box covered with 3 mm thick PC(Polycarbonet) / Acrylic sheet. (1 no. AUDA HT Room, 2 nos. LT Room,)

Quantity3

Rate-

Amount -

SITC of One 300/380 mm dia. Ex fan 16A independent Plug point near Ex. Fan with 2nos. 4 sq.mm Cu. Mains size wiring & earthwire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires with medium class Rigid PVC pipe and accessories to be erected on wall / ceiling, complete with ISI marked 3Pin socket and tissino type switch erected with earth continuity connection erected on Metal / PVC box covered with 3 mm thick PC(Polycarbonet) / Acrylic sheet. Plug point shall be near Ex.Fan. ( 2 nos. LT Room)

Quantity2

Rate-

Amount -

SITC of 6/16A independent Plug with 2nos. 4 sq.mm Cu. Mains size wiring & earthwire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires with medium class Rigid PVC pipe and accessories to be erected on wall / ceiling, complete with ISI marked 3 / 5 Pin socket and tissino type switch erected with earth continuity connection erected on Metal / PVC box covered with 3 mm thick PC(Polycarbonet) / Acrylic sheet. (1no. AUDA HT Room, 2 nos. LT Room)

Quantity3

Rate-

Amount -

SITC of Single Phase 20A 3 Pin Metal clad Industrial Type Socket with plug top and 20A SPMCB, suitable for flush mounting, in 16 SWG MS box of suitable size and covered with 3 mm thick electrical grade hylam sheet or equivalent ISI marked Electrical grade Bakelite sheet and earthing with 2.5 sq.mm insulated copper wire run inside the conduit including interconnections etc. complete as required. (1no. at LT Room )

Quantity1

Rate-

Amount -

SITC of Sheets steel powder coated weather proof enclosure with One no. 32A, 415V 4P MCB for Motor & Inductive load (C Curve) having 10 KA breaking capacity & confirms to IS: 8828. (1 no.WR DB TPN MCB at PH, 1 no. for EOT at pump house, 1no. for ECH , 1no. Portable desilting pump)

Quantity4

Rate-

Amount -

LED LIGHT FIXTURES & LIGHTING: SITC of Indoor wall mounting 20Watt or up to 25% higher wattage LED 4 feet Tube Light indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA polyester powder coated and high U.V. & corrosion resistance with diffuser and/or Polycarbonate optics with company mark/name 120 to 300 V,Power Factor more than 0.9, THD 20 %, CCT 4000 K to 6500K, Uniformity ratio 0.7, Luminaries efficacy 85 lumens/watt , LED driver efficiency 85 % (Each fitting required LM-79 & LM-80 Certificates) Tube Light with integral / non-integral driver, Surge-4KV,IP-20, 4 feet, Cat-III (For 3 nos. AUDA HT Room, 10 nos. at LT room)

Quantity13

Rate-

Amount -

Item description as per Sr. No. 10.1 SITC of 7 watts LED Lamps integral type,cool white with PC diffuser suitable for B22 LAMP holder(For 1no. AUDA HT Room, 1 nos. at LT Room).

Quantity2

Rate-

Amount -

SITC of 380mm sweep 1400 R.P.M exhaust fan, capacitor type, having double ball bearing, M.S.blades, mounting frame, forearms, suitable to operate on 230V,50 HZ AC supply conforming to IS: 2312.Fan shall be painted with epoxy grey colour controlled by one 6 A flush type switch on board and 6A plug point near Ex. fan.(2 nos. LT room)

Quantity2

Rate-

Amount -

SITC of 40W LED Surface / Wall mounted LED Flood Light fittings with High power White LEDs wattage of 1Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses with company mark/name engraved or embossed 120 to 300 V,Power Factor more than 0.95, THD 20 %, CCT 5000 K to 5700K, Uniformity ratio 0.45, Luminaries efficacy 85 lumens/watt . LED driver efficiency 85 %. ( Each fittings required LM-79 & LM-80 certificates) (IP-65), Surge -4KV Cat-III For Indoor use: (2nos. at LT Room cum PH)

Quantity2

Rate-

Amount -

SITC of 'B' class galvanised iron pipe 32 mm outside dia 45 cms long duly welded on 20 cms x 20 cms x 3 mm thick M.S. base plate, erected on wall or corner for mounting luminaries with necessary hardware materials duly painted for wall mounting indoor flood light fixtures on Wall of Buildings & post top lantern.

Quantity10

Rate-

Amount -

EXTERNAL LIGHTING (Flood LIGHT): SITC of 70W LED Wall mounted LED Flood Light fittings with High power White LEDs wattage of 1Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses with company mark/name engraved or embossed 120 to 300 V,Power Factor more than 0.95, THD 20 %, CCT 5000 K to 5700K, Uniformity ratio 0.45, Luminaries efficacy 85 lumens/watt . LED driver efficiency 85 %. ( Each fittings required LM-79 & LM-80 certificates) (IP-65), Surge -4KV Cat-III For Outdoor use: (6 nos. for area lighting)

Quantity6

Rate-

Amount -

SITC of 40watt, Cat-III Post Top Lantern LED fitting comprises of 650 MM TOP Diameter, 120 degree beam angle with 3 Nos. Supporting Ribs and with 0.5mt. G.I. fitting pipe (for Gate light)

Quantity2

Rate-

Amount -

EXTERNAL LIGHTING (STREET LIGHT): SITC of Street Light Pole, steel tubular swaged type, 7.5 meter long with single arm & M.S.base plate with pipe cap and over hung 1.5 m long having dia to suit the socket of 240V LED street light fixtures. Street light pole unit rate shall be with (i) IP 65 SMC box of size 20 x 15 x 15 cms. with MCB & terminal strip inside the box with hinged/sliding door (ii) 50mm dia, B class GI pipe bracket min.1.5mtr long for Incoming & outgoing cable (iii)MS Cable Clamp of 25 x 3mm (iv)SITC of 1.5 Mtr.single Arm bracket of medium duty MS pipe of 4.2 cms. Out side dia complete with suitable sleeve tubing 45 cms. long of required size of pole top etc. and having spread of 1.5.mtr. length with 110 deg.(v) Complete painted with one coat of Red oxide / PU base primer and two coats of Aluminium / PU paint for Pole,Arm, pipe etc.

Quantity6

Rate-

Amount -

SITC of 70W LED Street light fittings with High power White LEDs wattage of 1Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses with company mark/name engraved or embossed 120 to 300 V,Power Factor more than 0.95, THD 20 %, CCT 5000 K to 5700K, Uniformity ratio 0.45, Luminaries efficacy 85 lumens/watt . LED driver efficiency 85 %. ( Each fittings required LM-79 & LM-80 certificates) Street Light (IP-65), Surge -4KV, 70 watt Cat-III

Quantity6

Rate-

Amount -

SITC of M-20 / 1:2:4 cement concrete foundation for Street light pole & 70 % PCC from bottom including excavation for the pole of size 60 x 60 x 120 cms. Deep in below ground level with plinth of 45 cms x 45 cms(or 45 cms dia x 45 cms) high upper ground level with necessary curing and finishing in approved manner.

Quantity6

Rate-

Amount -

SAFETY ACCESSORIES SITC of following safety accessories complete with necessary fixing brackets, other accessories and tools etc. as required to complete the job. Supply & Erecting carbon dioxide (CO2) fire extinguisher of 6.5kg capacity with necessary clamps made from 50 x 6 mm M.S. Flat with nut & bolts grouted in wall complete. (for 2nos. X'mer-1 & 2, 1no. HT Room, 1no. for LT Room)

Quantity4

Rate-

Amount -

Supplying of standard first AID box with antiseptic cream, medicine for use on wounds due burn, crepe bandage, guage bandage, medicated ready to use bandage (Band-aid) adhesive tape for medicinal user, scissors, antiseptic solution (Savlon or similar) etc. (All above contents shall be of standard makes) (1 no. for HT room, 1no. For LT Room)

Quantity2

Rate-

Amount -

Supply & fixing of printed instruction (First Aid) Chart both in English and Gujarati and duly framed with front glasses, for treatment of person suffering from electric shock. (1 no. for HT Room, 1 no. For LT Room)

Quantity2

Rate-

Amount -

Supplying & fixing of floor mounting stand for keeping four nos. of FIRE buckets comprising 1500 mm in length, 900 mm height frame made out of 30mm X30 mm X 4 mm angle iron with cross supports for legs, welded with 4 hooks and duly painted with one coat of red lead and two coats of approved enamelled silver paint. ( HT Panel, Tr. 1 & 2)

Quantity3

Rate-

Amount -

Supply and fixing of 20 W fluorescent lamp operated emergency light with maintenance free battery for 3 hours operation during mains power failure. (for 1no. LT Room)

Quantity1

Rate-

Amount -

Supply and laying of Synthetic Insulating Mat of Class - B of min. thickness 12mm as per IS:15652 and with good electrical insulation property for 11kV/22KV as per site requirement. (for HT Panel)

Quantity3

Rate-

Amount -

Supply and laying of Synthetic Insulating Mat of Class - A of min. thickness 4mm as per IS:15652 and with good electrical insulation property for 1.1KV/3.3KV as per site requirement. (for LT Panel)

Quantity12

Rate-

Amount -

Providing pair of rubber hand gloves ISI make suitable for working on 22 KV supply

Quantity2

Rate-

Amount -

LIASONING CHARGES FOR OBTAINING NOC Power Liasoning Charges for obtaining N.O.C from Electrical Inspector / Statutory authority for Power / Ele. Installation. (Fees shall be paid by tenderer for obtaining N.O.C. from Electrical Inspector / Statutory authority on behalf of client and shall be reimbursed on submission of original receipt to Client). Liasoning Charges shall include preparing required attested documents & drawing for obtaining NOC on behalf of client (Applicable Fees / deposits shall be reimbursed by Client).

Quantity1

Rate-

Amount -

INSTRUMENTATION PRESSURE MEASURING SYSTEM Supply, installation, testing & commissioning of Diaphragm Type pressure guage having 150 mm dial with necessary fittings/accessories in SS 316, manifold valve, snubber, nipples etc. complete.at deliry line of each Pump. Range :0 - 1.6 Kg/cm2 (at pump's delivery side)

Quantity4

Rate-

Amount -

Supply, installation, testing and commissioning of Hydrostatic type Level Transmitter for level based auto operation of pump along with 20 meter cable, junction box, all mounting accessories, hardware, Fixing of 2" size PVC pipe in sump for installation the Hydrostatic sensor, Clamp,etc. complete in all respects and as per specs and having following measurement ranges . Meas. Range: upto 10 m at sump

Quantity1

Rate-

Amount -

Supply, installation, testing and commissioning of Float type Level Switch along with 20 mtr. Cable and WP Junction Box (at sump for dry run protection of pumps) complete in all respects and as per specification.The scope also includes providing 4" flanged , puddle pipe approximate 300 mm long including fixing of the same in civil structure slabe of pump house for mounting of level switch.The work also include all necessary work like make hole,repair / modificationin slab, etc.

Quantity1

Rate-

Amount -

ELECTRO MAGNETIC FLOWMETER Supply, installation, testing and commissioning of remote type Full Bore Electromagnetic flow meter comprising of IP-68 Sensor, IP-65/66 remote transmitter with 20 m cable between sensor and transmitter,Panel mounted flow indicator cum Totalizer along with all mounting accessories,complete as require , hardware, etc. and joing with pipe & associated items like valve, expansion bellows, complete in all respect and as per specs and shall have following size and measurement range. The scope also includes necessary connection with header pipe. Meter Size : 1000 mm NB (At Header Line) Pipe size: 1000 mm NB Flow Measurement Range: 1500-7500 m3/hr Pipe Material : C.I

Quantity1

Rate-

Amount -

PLC BASED INSTRUMENT CONTROL PANEL Supply, Installation, Testing & Commissioning of PLC Based Instrument control Panel with 7" Color Touch Screen HMI, 4G GPRS modem for Future Remote Data transmission to central SCADA of Client/ AUDA, Modbus Communication Port for MFF, Multiplication relay for Dry run protection of pump, etc. Instrument Control Panel '(PLC Enclosure / Panel ) with necessary PLC based logic and wiring , Min 1 nos. flow indicator/totalizer, Min. 1 no. process Indicator, Min 2 no. analog signal multiplier, Min. 1 kVA UPS (with 30 min backup alongwith filter for harmonic, suitable rating SMF batteries alongwith battery charger, cabling between UPS and battery and all other accessories as per standard), etc. complete in all respects and as per specs PLC having minimum I/O count of 20DI / 10 DO / 4AI / 0AO.All work shall be carrierd out complete in all respects and as per tender specifications.

Quantity1

Rate-

Amount -

INSTRUMENT CABLE & ACCESSORIES 'Supply, Laying, Installation, Connection, Termination, Testing & Commissioning of Instrument Cables, along with cable glands, lugs, cable trays, required junction boxes, fittings and accessores as per specs. The unit rate shall include a. Supply, loading & unloading of the cable at site from store. B. Shifitng of cable from site store to place of installation. c. Fixing of cable clamps, brackets, supports, route markers etc. where ever required to fix the cables safely. d. Excavation, back filling and levelling of ground alongwith laying of fine sand, protection bricks and other necessary civil material for laying cables outside the building. e.Testing and submission of sketches & reports of all the cables laid. POWER CABLE 3C X 1.5sq.mm.

Quantity25

Rate-

Amount -

CONTROL CABLE 10C X 1.5 sq.mm.

Quantity80

Rate-

Amount -

SIGNAL CABLE 1P X 1.5sq.mm.

Quantity20

Rate-

Amount -

INSTRUMENT CABLE TRAY GI Perorated type cable tray shall be made out of galvanized MS sheets of 2.0 mm thickness with required asccessories . All material shall be Hot dip galvanised as per IS 2629 as mentioned in specification and tray hardware shall be in GI. 50 X 25 mm - Perforated type

Quantity30

Rate-

Amount -

CABLE END TERMINATION AND CONNECTION : 'Supply, fixing, connection, testing and commissioning of double compression brass cable glands and crimping type Bimetalic lugs / sockets with necessary tools and equipments as specified in specifications and IS complete in all respects. The glands and lugs / sockets shall be suitable for cable size and type mentioned above. The job also includes earthing the glands and armour of the cable with common earth bar or flexible copper mesh as applicable. POWER CABLE 3C X 1.5sq.mm

Quantity2

Rate-

Amount -

CONTROL CABLE 10C X 1.5sq.mm

Quantity8

Rate-

Amount -

SIGNAL CABLE 1P X 1.5sq.mm.

Quantity6

Rate-

Amount -

TEST EQUIPMENT Magger of range 0 -1000V

Quantity1

Rate-

Amount -

Clipon meter (Battery operated) satisfying the following. (i)With 0.100 mA, 0-1 A and 0-200 A AC (ii) With 0-100 mV, 0-3 V, 0-30 V, 0-300 V and 0-1000 V (iii) Least five (0-100) m.Ohm,(0-1) Ohm, (0-10) Ohm, (0-100) Ohm, (0-1000) Ohm. (iv) The input impedence shall not be less than one maga ohms for voltage range.

Quantity1

Rate-

Amount -

LADDER Ladder shall be made out of light aluminium allow of good strength. They shall be of step ladder, foldable, self supportig type with sperader of metalic angles or high strength. (i) 6 Meter long

Quantity1

Rate-

Amount -

OFFICE FURNITURE Office table of size 1200 mm X 600 mm

Quantity1

Rate-

Amount -

Steel Office chair

Quantity3

Rate-

Amount -

Steel cupboard (6 feet H x 3.5 feet W x 1.0 feet 4 inch D)

Quantity1

Rate-

Amount -

ELECTRO-MECHANICAL AND INSTRUMENTATION WORKS FOR SWPS AT MANIPUR GODHAVI POND-1 SEWAGE SUBMERSIBLE NON CLOG PUMP-MOTOR SET Supply, Installation, Testing and Commissioning (SITC) of Submersible NC Pump-Motor set suitable for sewage application with semi-open or suitable type Impeller & wear Rings in CF8M with CI FG 260 Casing & casing cover, SS 410 shaft & with motor suitable for 3-Phase, 415 V, 50 Hz., AC induction Air filled dry type submersible motor of mini. rating as specified having max. 1000 RPM sync. speed, insulation Class 'F' With temp. rise limited to class B and IP-68 protection. The scope shall include all required accessories viz. automatic coupling device, SS-304 heavy duty & of suitable size double guide pipes of length to suit the sump height with required supports, SS-304 or suitable stainless steel grade Chain with shackles (shall be with dual hook / shackles of 200 mm or suitable higher size at app. every 1.5m C-C distance) & of length as per sump height + min. 3m, Submersible Power & control cable (copper flexible & stranded type conductor of reqd. cores & size for each pump motor set) & length of sump height + min. 10 m long each run with necessary electrical termination connection at junction box / starter panel and RCC foundation blocks for auto coupling & delivery bend & suitable to install pump set in new sump, PMU etc. complete as per IS, Tender Drawings and Specification and also including in scope any other parts / accessories / fittings required to complete the work in all respects & satisfactory operation of pump set. Pump Capacity: 2400 m3/hr, Head: 19 m, Motor Rating: 180 kW mini. (or higher rating as reco. by pump mfg.) Over all Efficiency at Duty: min. 75.0 %

Quantity3

Rate-

Amount -

Quantity3

Rate-

Amount -

Quantity3

Rate-

Amount -

Item Description as per 2.2.1 and of following size complete in all respect. Size: 900 mm NB (at Header after Flow Meter)

Quantity1

Rate-

Amount -

Quantity3

Rate-

Amount -

Item Description as per 3.1.1 and of following size complete in all respect. Size: 900 mm NB x 300 mm (L) (On header near BFV)

Quantity1

Rate-

Amount -

Quantity20000

Rate-

Amount -

Quantity7850

Rate-

Amount -

Quantity1

Rate-

Amount -

Quantity1

Rate-

Amount -

Quantity3

Rate-

Amount -

Item Description as per 5.3.1 and of following size complete in all respect. Size: 700 mm dia

Quantity21

Rate-

Amount -

Item Description as per 5.3.1 and of following size complete in all respect. Size: 900 mm dia

Quantity11

Rate-

Amount -

Item Description as per 5.3.1 and of following size complete in all respect. Size: 1000 mm dia

Quantity1

Rate-

Amount -

SLUICE GATE Supply, installation, testing and commissioning of Manual Gear Operated C.I. Sluice Gate conforming to AWWA C 501 or IS : 13349 - 1992 Class - 1 with rising spindle, single faced, wall thimble mounted, handwheel, flange back frame, head stock, Spindle with supports brackets having length as specified or to suit site condition, suitable for seating as well as unseating water head and as per specifications and complete in all respect. Size : 1200 mm X 1200 mm - approx. 7.0 m spindle length (at Inlet Pipe) - Conventional Bottom Closing or suitable Closing

Quantity1

Rate-

Amount -

BOX TYPE MANUAL MESH SCREEN Supply, Installation, Testing and Commissioning of Box Type Manual mesh Screen having following size, made of SS 304 material having round bars of size 9 mm dia. with clear bar opening as specified here below, suitably welded in outer frame of equal Leg SS angle of size 50 mm x 50 mm x 6 mm thick or higher, with intermediate support at required locations, complete as per specs. & shall also including followings: The screen shall be with SS perforated Screening Material Collection Box at bottom end of Screen having size as specified, fabricated from 3 mm thk. SS sheet, screen shall be suitable to slide complete screen through rollers between guide channel of MCP 400, embedded/ fixed in wall on both sides of RCC wall up to top of chamber with all necessary hardware, SS nuts, bolts & washers, sacrificial Brass lugs on sides, min. two lifting lugs/hooks & SS lifting chain having intermediate link/chain of 300 mm dia. or suitable higher size at every 1.5 m distance with shackle, etc. complete in all respects and provided with 1 set of cleaning rake with each screen complete as per specification and complete in all respect. Screen Size: 1900 mm (W-or as per actual site) x 1900 mm (H) x 300 mm (D) Screening Box size: 300 mm height with width & depth as per screen Opening: 50 mm x 50 mm sq. opening. (w/o Guide channel & MS supporting structure) (Note: Screen suitable for 2000 mm chamber width or to suit site requirement.)

Quantity1

Rate-

Amount -

SINGLE GIRDER EOT CRANE: SITC of Single girder type E.O.T. crane with electrically operated hoist, class II duty, geared travelling trolly with lift as specified here below complete with long travel rail track (40 sq.mm. bar), moving or cross girder, all three motions electrically operated by suitable rating motor IP54, control panel, & down pendant control block, brake, safety device, cables from motor to starter panel & other required accessoaries & manufactured and tested as per IS-807, IS-3938 & IS-3177, class-II, complete as per IS & Specifications. Capacity: min. 5 Ton, (at Pump House) Span: App.8.5 m (or as per site) Lift: 14.0 m or (or as per site) Bay length: App. 12 m (or as per site) Note: Minimum as specified capacity or higher as per requirement such that EOT crane capacity is min.1.25 times of the pump set OR single heaviest component to be lifted within pump house.

Quantity1

Rate-

Amount -

MONORAIL EOT WITH ELECTRIC CHAIN HOIST Supply, installation, testing & commissioning of Electrically Operated Chain Hoist & Electrically operated Trolley, suitable to operate on Mono Rail Girder having motorised motion in vertical lifting & cross travel, manufactured as per IS:6547-1972-Class-II & IS-3177- Class-II, complete with electrically operated chain hoist & Electically operated geared trolley, brake, chain-gear, motors, safety device, pendant push button, starter panel, cables from motor to starter panel and all other required accessories like limit switches, panel, power supply system (Fastoon cable type), fasteners, epoxy painting, etc. tested for over load as per IS complete as per specifications and complete in all respect. Capacity : 1 Ton. Min. (at Inlet chamber for Manual Screen) Lift : 11.00 m as mini. or as per site req. Bay Length: 6.0 m min. or as per site req. (w/o MONORAIL GIRDER & MS supporting structure) Note: (1) Minimum as specified capacity or higher as per requirement such that ECH capacity is min.1.25 times of the screen or single heaviest component to be lifted within Inlet chamber.

Quantity1

Rate-

Amount -

Quantity1

Rate-

Amount -

Quantity2000

Rate-

Amount -

Quantity2000

Rate-

Amount -

Quantity1

Rate-

Amount -

SITC of H.V. CABLES SITC of 11 kV (E), 3C x 240 sq.mm., Aluminium, extruded innersheath, Armoured, XLPE , H.V Cable as per IS 7098 (part 2) and Tech. Specification. (Torrent HT panel to AUDA HT panel, HT panel to TFR 1 &2)

Quantity100

Rate-

Amount -

SITC of the Indoor Heat shrinkable Termination: SITC of Indoor H.T. cable end terminations Kit for 11 kV (E), 3C x 240 sq.mm. XLPE armoured cable with all accessories as required.

Quantity6

Rate-

Amount -

DISTRIBUTION TRANSFORMER SITC of 630kVA, 11/0.433 kV, Outdoor Transformer continuously rated, 3-phase, 50 Hz, OCTC, ONAN cooled, copper double wound core type, vector group Dyn11, Delta(HT)/Star(LT), Oil immersed winding with temperature rise in oil / winding 40/45 deg.C above design temperature with neutral brought out to connect to separate earthing including Terminal arrangement bushing / cable Box on HT side and cable box on LT side, first fill of oil along with Fittings & accessories as per Energy Efficiency level-1 of IS:1180 (Part-1):2021 and its latest amendments etc. and Tender Specification. Note: Transformer shall be suitable for parallel operation. Minimum requirement shall be as below: Both transformer shall have " Identical X/R ratio, phase angle shift, polarity, phase sequence, frequency, position of tap changer. Turns ratio & voltage ratio".

Quantity2

Rate-

Amount -

Quantity70

Rate-

Amount -

Supply and Installation of GI Chain link fencing frames with L angle/Channel post around Transformer yard etc. as per Specification and Drg.

Quantity30

Rate-

Amount -

SITC of 3.0 mtr wide gate with GI chain link as per Specification and Drg.

Quantity2

Rate-

Amount -

LOW VOLTAGE (LT) PANEL BOARD (PMCC) : SITC of PMCC Panel (50kA), compartmentalized, Stand mounted, operating height maximum 1800/1900 mm, Extensible on both ends, suitable for Manual & Auto operation -Local & through PLC/SCADA operation as per site conditions complete in all respects as per Tender SLD / Specification / IS and including following as minimum: (1) INCOMER 1&2: FP, 1000A, 50 KA Microprocessor EDO ACB LSIG with inbuilt RS 485 MODBUS communication with Digital Voltmeter with VSS, Digital PF Meter, Digital Ammeter with ASS, Resin Cast CT- Cl : 0.5,10VA, Digital MFM Cl. 0.5 with RS-485, Breaker Control Switch (TNC), A/M, L/R switch, Indicating lamps, Push buttons etc,. with electrical & mechanical interlocking between Incomers and buscoupler. (1.1) Surge protection device, 3P + N, Type 2 for lightning/surge protection. Load sensing CT in Incomer & Busbar for APFC panel along with Cl.-0.5. Constant voltage/control voltage transformer 1500VA, 415V/230V AC, with tapping +/-5% in steps of 2.5%, 25A DP MCB & 25A Power contactor. (2) BUS-COUPLER: One no. FP 1000A ACB (same as per Incomer) (2.1) 1000A TPN, EC grade AL Main busbars. (Busbars size as per 50KA fault level and Temperature rise with current density 0.8A/Sq.mm) (3) TRANSFORMER FIXED COMPENSATION FEEDER (25 KVAr): 2 Sets: Each comprising of 63A FP Thermal magnetic MCCB, Ind. Lamp, with Capacitor duty contactor,ON Delay timer, individual MCCB/MCB as per Tender SLD. (4) SOFT STARTER FOR 180 KW MOTOR : 3 NOS Each feeder comprising of Soft Starter with Internal/External bypass contactor for 180 kW Motor or higher as per pump manufacturer reco. with soft starter rating minimum (383A @ 50deg C) with suitable derating with detachable type door mounted display key pad and with 630A TPN microprocessor MCCB LSIG, 550A, AC3 duty Line contactor, Semi conductor fuse, Digital MFM Cl. 0.5 with RS-485, Resin Cast CT Cl: 0.5, PMU,Temperature Scanner with RS-485, SPP, A/M, L/R switch, Indicating lamps, Push buttons etc. (5) POWER FEEDER FOR 245 KVAR APFC-1: 1 NO: Each feeder comprising of 630A TPN TM EDO- ACB, 50kA with with Digital Ammeter, ASS, CT, Indicating lamp, etc.complete in all respects. (6) POWER FEEDER FOR 125 KVAR APFC-2: 1 NO: Each feeder comprising of 320A TPN TM MCCB, 50kA with with Digital Ammeter, ASS, CT, Indicating lamp, etc.complete in all respects. (7) 63A TPN TM MCCB FEEDER : 2 Nos. (2 nos. Spare) Each feeder comprising of 63A TPN Thermal Magnetic (TM) MCCB, with indicating lamp etc. (8) 32A TPN TM MCCB FEEDER : 3 Nos.(2nos. spare, 1no. Desilting Pump) Each feeder comprising of 32A TPN Thermal Magnetic (TM) MCCB, with indicating lamp etc. (9) 63A TPN TM MCCB FEEDER FOR ALL MCB FEEDERS: 2 sets: Incomer: 63A TPN Thermal Magnetic (TM) MCCB, with indicating lamp etc. 9.1) 8 nos. 32A 'C' curve 4P MCB feeders (for 1no. Ind LDB, PLC Panel, 2nos. EOT & 4 nos. spare feeders) 9.2) 1 nos. 32A 'C' curve 4P MCB with Time switch,32A contactor 4P,ON lamp feeders (for Outdoor LDB) 9.3) 4 nos. 16A DP MCB feeders (for single phase supply for 2nos. X'mer marshaling box, HT Panel & Spare.) (10) Multiplication relay as required for dry run protection of pumps. NOTE: 1). All MCCB shall be 50KA, Ics = 100% Icu, inbuilt protection with adj O/L and Adj.S/c (LSIG for MP MCCB),Extended rotary handle, Terminal spreader, Auxiliary Change over contact and trip contact as required.2) All MFM, ACB, Soft Starter,MPR,Temp.Scanner etc shall be with inbuilt RS 485.

Quantity1

Rate-

Amount -

SITC of 245 KVAR at 415V, APFC-1 Panel, compartmentalised, Stand mounted, extensible type on both sides with Horizontal bus bar arrangement as per site requirement & complete in all respects as per SLD / Specification / IS and including following as minimum: (1) INCOMER: 1.1 630A, TPN, 50 KA TM ACB LSIG with Digital Voltmeter with VSS, Digital Ammeter with ASS, Resin Cast CT- Cl : 1.0,10VA, Breaker Control Switch (TNC), A/M, L/R switch, Indicating lamps, Push buttons etc. 1.2 Microprocessor based APFC Relay,144sq.mm, 16 STEP with RS-485 with minimum operating current 10mA. 2. OUTGOING CAPACITOR FEEDER: Capacitor feeder of following rating comprising of TPN MCCB/MCB with ON & TRIP Indication, Capacitor duty contactor,Heavy duty MPP / gas filled capacitor unit, A/M Switch, ON Delay timer,ON / OFF Push button, ON, TRIP, Auto & Manual Indication lamp etc. as per Tender SLD& Specification 2.1 50 KVAR FEEDER: 3 NOS 2.2 20 KVAR FEEDER: 3 NOS 2.3 10 KVAR FEEDER: 2 NOS 2.4 5 KVAR FEEDER: 2 NOS 2.5 2 KVAR FEEDER: 2 NOS 2.6 1 KVAR FEEDER: 1 NO 2.7 Two nos. Vacant feeder suitable for 1-50KVAr and 1-20KVAr to be provided. NOTE: 1. cooling/exhaust fan : Heavy duty 8" Metalic Housing and Metal Impeller / Blade / Vanes of Minimum2nos. or higher as required at the top of the panel with canopy/hood. 2. For Capacitors of rating ≤ 5 KVAr only, All types viz. APP/MPP/Gas Filled are acceptable.

Quantity1

Rate-

Amount -

SITC of 125 KVAR at 415V, APFC-2 Panel,compartmentalised, Stand mounted, extensible type on both sides with Horizontal bus bar arrangement as per site requirement & complete in all respects as per SLD / Specification / IS and including following as minimum: (1) INCOMER: 1.1 320A, TPN, 50 KA TM MCCB LSIG with Digital Voltmeter with VSS, Digital Ammeter with ASS, Resin Cast CT- Cl : 1.0,10VA, Breaker Control Switch (TNC), A/M, L/R switch, Indicating lamps, Push buttons etc. 1.2 Microprocessor based APFC Relay,144sq.mm, 12 STEP with RS 485 with minimum operating current 10mA. 2. OUTGOING CAPACITOR FEEDER: Capacitor feeder of following rating comprising of TPN MCCB/MCB with ON & TRIP Indication, Capacitor duty contactor,Heavy duty MPP / gas filled capacitor unit, A/M Switch, ON Delay timer,ON / OFF Push button, ON, TRIP, Auto & Manual Indication lamp etc. as per Tender SLD& Specification 2.1 25 KVAR FEEDER: 3 NOS 2.2 20 KVAR FEEDER: 1 NO 2.3 10 KVAR FEEDER: 2 NOS 2.4 5 KVAR FEEDER: 1 NO 2.5 2 KVAR FEEDER: 2 NOS 2.6 1 KVAR FEEDER: 1 NO 2.7.Two nos. Vacant feeder suitable for 1-25KVAr and 1-10KVAr to be provided. NOTE: 1. cooling/exhaust fan : Heavy duty 8" Metalic Housing and Metal Impeller / Blade / Vanes of Minimum2nos. or higher as required at the top of the panel with canopy/hood. 2. For Capacitors of rating ≤ 5 KVAr only, All types viz. APP/MPP/Gas Filled are acceptable.

Quantity1

Rate-

Amount -

Quantity2

Rate-

Amount -

Quantity310

Rate-

Amount -

3.5C x 240 sq. mm. A2XFY Cable (2 Runs for PMCC to APFC-2 Panel, 1 Runs for PMCC to APFC-1 Panel)

Quantity80

Rate-

Amount -

4C x 6 sq. mm. A2XFY(X) Cable (For 1nos. Indoor LDB, Outdoor LDB, 1nos. Portable Desilting Pump, WR-DB with TPN MCB at Pump House & for 6 nos. street light)

Quantity320

Rate-

Amount -

4C x 2.5 sq. mm. 2XWY/2XFY(X) Cable (For 1no. TPN MCB for Elect. Crane at Pump House, for ECH at Screen & PLC Panel)

Quantity100

Rate-

Amount -

2C x 2.5 sq. mm. Multi strand 2XWY(X) Cable (For HT Panel, for 2nos. APFC CT & X'mer marshaling box Single Phase Supply)

Quantity150

Rate-

Amount -

10C x 1.5 sq.mm. 2XWY(X )Cable (2Run Tr. to HT Panel control cable)

Quantity120

Rate-

Amount -

Quantity16

Rate-

Amount -

3.5C x 240 sq. mm. A2XFY Cable (2 Runs for PMCC to APFC-2 Panel, 1 Runs for PMCC to APFC-1 Panel)

Quantity6

Rate-

Amount -

4C x 6 sq. mm. A2XFY(X) Cable (For 1nos. Indoor LDB, Outdoor LDB, 1nos. Portable Desilting Pump, WR-DB with TPN MCB at Pump House & for 6 nos. street light )

Quantity20

Rate-

Amount -

4C x 2.5 sq. mm. 2XWY/2XFY(X) Cable (For 1no. TPN MCB for Elect. Crane at Pump House, for ECH at Screen & PLC Panel)

Quantity6

Rate-

Amount -

2C x 2.5 sq. mm. Multi strand 2XWY(X) Cable (For HT Panel, for 2nos. APFC CT & X'mer marshaling box Single Phase Supply)

Quantity10

Rate-

Amount -

10C x 1.5 sq.mm. 2XWY(X )Cable (2Run Tr. to HT Panel control cable)

Quantity8

Rate-

Amount -

Quantity20

Rate-

Amount -

300 x 100 mm - Ladder type

Quantity20

Rate-

Amount -

150 x 50 mm - Ladder type

Quantity50

Rate-

Amount -

Quantity30

Rate-

Amount -

Quantity100

Rate-

Amount -

Quantity150

Rate-

Amount -

Quantity30

Rate-

Amount -

CHEMICAL EARTHING SYSTEM SITC of Maintenance free chemical earthing (copper) with earthpit of minimum bore size dia. 225mm Safe Earthing Electrode consisting Pipe-in-Pipe Technology as per IS-3043:1987 /Tech spec. made of corrosion free Pipes having Outer pipe dia of 48 mm having 250 Micron copper plating, Inner corrosion free Hot dip galvanised (80 to 100 micron) pipe dia of 26 mm with copper flat strip type connection terminal 14mm dia with constant ohmic value surrounded by highly conductive corrosion resistant chemical compound with high charge dissipation suitable for electrical installation & of 3Mtr. length of Pipe with two nos. 25Kg. bag of Back filling compound.. (2 nos HT Panel, 2nos. Each for neutral of Tr.-1 & 2 & 2nos. PLC Panel) NOTE: Earthing Resistance value & date shall be painted on the chamber cover.

Quantity8

Rate-

Amount -

SITC of Maintenance free chemical earthing with earthpit of minimum bore size dia. 225mm Safe Earthing Electrode consisting Pipe-in-Pipe Technology as per IS-3043:1987 /Tech spec. made of corrosion free Hot dip Galvanised (min 150 Microns) Pipes having Outer pipe dia of 76 mm , Inner corrosion free Hot dip galvanised (80 to 100 micron) pipe dia of 26 mm with copper flat strip type connection terminal 14mm dia with constant ohmic value surrounded by highly conductive corrosion resistant chemical compound with high charge dissipation suitable for electrical installation & 3Mtr. length of Pipe with two nos. 25Kg. bag of Back filling compound. (2nos. Each for Tr.1 & Tr. 2 Body, PMCC & all elect. Equipments) NOTE: Earthing Resistance value & date shall be painted on the chamber cover.

Quantity8

Rate-

Amount -

Quantity8

Rate-

Amount -

Quantity312

Rate-

Amount -

Quantity20

Rate-

Amount -

Quantity190

Rate-

Amount -

Quantity15

Rate-

Amount -

SITC of HOT Dip Galvanized iron strip wire 8 SWG (For LDB, LCS, etc.) (8 SWG G.I Strip, 0.103 Kg/m, 0.103 x 200Mt.=20 Kg.)

Quantity20

Rate-

Amount -

Quantity100

Rate-

Amount -

As per Sr. No.-9.1 (b) SITC of Mains wiring with 3 wire 2.5 sq.mm as per tender specification & IS.

Quantity50

Rate-

Amount -

As per Sr. No.-9.1 (c) SITC of Mains wiring with 4 wire 1.5 sq.mm as per tender specification & IS.

Quantity50

Rate-

Amount -

As per Sr. No.-9.1 (d) SITC of Mains wiring with 4 wire 2.5 sq.mm as per tender specification & IS.

Quantity50

Rate-

Amount -

Quantity24

Rate-

Amount -

Quantity4

Rate-

Amount -

Quantity2

Rate-

Amount -

Quantity4

Rate-

Amount -

Quantity1

Rate-

Amount -

Quantity4

Rate-

Amount -

Quantity14

Rate-

Amount -

Item description as per Sr. No. 10.1 SITC of 7 watts LED Lamps integral type,cool white with PC diffuser suitable for B22 LAMP holder(For 1no. AUDA HT Room, 1 nos. at LT Room).

Quantity2

Rate-

Amount -

Quantity2

Rate-

Amount -

Quantity2

Rate-

Amount -

Quantity10

Rate-

Amount -

Quantity6

Rate-

Amount -

SITC of 40watt, Cat-III Post Top Lantern LED fitting comprises of 650 MM TOP Diameter, 120 degree beam angle with 3 Nos. Supporting Ribs and with 0.5mt. G.I. fitting pipe (for Gate light)

Quantity2

Rate-

Amount -

Quantity6

Rate-

Amount -

Quantity6

Rate-

Amount -

Quantity6

Rate-

Amount -

Quantity4

Rate-

Amount -

Quantity2

Rate-

Amount -

Quantity2

Rate-

Amount -

Quantity3

Rate-

Amount -

Supply and fixing of 20 W fluorescent lamp operated emergency light with maintenance free battery for 3 hours operation during mains power failure. (for 1no. LT Room)

Quantity1

Rate-

Amount -

Supply and laying of Synthetic Insulating Mat of Class - B of min. thickness 2.5mm as per IS:15652 and with good electrical insulation property for 11kV/22KV as per site requirement. (for HT Panel)

Quantity3

Rate-

Amount -

Supply and laying of Synthetic Insulating Mat of Class - A of min. thickness 2mm as per IS:15652 and with good electrical insulation property for 1.1KV/3.3KV as per site requirement. (for LT Panel)

Quantity12

Rate-

Amount -

Providing pair of rubber hand gloves ISI make suitable for working on 22 KV supply

Quantity2

Rate-

Amount -

Quantity1

Rate-

Amount -

Quantity3

Rate-

Amount -

Quantity1

Rate-

Amount -

Quantity1

Rate-

Amount -

ELECTRO MAGNETIC FLOWMETER Supply, installation, testing and commissioning of remote type Full Bore Electromagnetic flow meter comprising of IP-68 Sensor, IP-65/66 remote transmitter with 20 m cable between sensor and transmitter,Panel mounted flow indicator cum Totalizer along with all mounting accessories,complete as require , hardware, etc. and joing with pipe & associated items like valve, expansion bellows, complete in all respect and as per specs and shall have following size and measurement range. The scope also includes necessary connection with header pipe. Meter Size : 900 mm (At Header Line) Pipe size: 900 mm Flow Measurement Range: 1200-5000 m3/hr Pipe Material : C.I

Quantity1

Rate-

Amount -

PLC BASED INSTRUMENT CONTROL PANEL Supply, Installation, Testing & Commissioning of PLC Based Instrument control Panel with 7" Color Touch Screen HMI, 4G GPRS modem for Future Remote Data transmission to central SCADA of Client/ AUDA, Modbus Communication Port for MFF, Multiplication relay for Dry run protection of pump, etc. Instrument Control Panel '(PLC Enclosure / Panel ) with necessary PLC based logic and wiring , Min 1 nos. flow indicator/totalizer, Min. 1 no. process Indicator, Min 2 no. analog signal multiplier, Min. 1 kVA UPS (with 30 min backup alongwith filter for harmonic, suitable rating SMF batteries alongwith battery charger, cabling between UPS and battery and all other accessories as per standard), etc. complete in all respects and as per specs PLC having minimum I/O count of 20DI / 10 DO / 4AI / 0AO. All work shall be carrierd out complete in all respects and as per tender specifications.

Quantity1

Rate-

Amount -

Quantity25

Rate-

Amount -

CONTROL CABLE 10C X 1.5 sq.mm.

Quantity60

Rate-

Amount -

SIGNAL CABLE 1P X 1.5sq.mm.

Quantity20

Rate-

Amount -

Quantity30

Rate-

Amount -

Quantity2

Rate-

Amount -

CONTROL CABLE 10C X 1.5sq.mm

Quantity6

Rate-

Amount -

SIGNAL CABLE 1P X 1.5sq.mm.

Quantity6

Rate-

Amount -

TEST EQUIPMENT Magger of range 0 -1000V

Quantity1

Rate-

Amount -

Quantity1

Rate-

Amount -

Quantity1

Rate-

Amount -

OFFICE FURNITURE Office table of size 1200 mm X 600 mm

Quantity1

Rate-

Amount -

Steel Office chair

Quantity3

Rate-

Amount -

Steel cupboard (6 feet H x 3.5 feet W x 1.0 feet 4 inch D)

Quantity1

Rate-

Amount -

ELECTRO-MECHANICAL AND INSTRUMENTATION WORKS SWPS AT MANIPUR GODHAVI POND-2 SEWAGE SUBMERSIBLE NON CLOG PUMP-MOTOR SET Supply, Installation, Testing and Commissioning (SITC) of Submersible NC Pump-Motor set suitable for sewage application with semi-open or suitable type Impeller & wear Rings in CF8M with CI FG 260 Casing & casing cover, SS 410 shaft & with motor suitable for 3-Phase, 415 V, 50 Hz., AC induction Air filled dry type submersible motor of mini. rating as specified having max. 1000 RPM sync. speed, insulation Class 'F' With temp. rise limited to class B and IP-68 protection. The scope shall include all required accessories viz. automatic coupling device, SS-304 heavy duty & of suitable size double guide pipes of length to suit the sump height with required supports, SS-304 or suitable stainless steel grade Chain with shackles (shall be with dual hook / shackles of 200 mm or suitable higher size at app. every 1.5m C-C distance) & of length as per sump height + min. 3m, Submersible Power & control cable (copper flexible & stranded type conductor of reqd. cores & size for each pump motor set) & length of sump height + min. 10 m long each run with necessary electrical termination connection at junction box / starter panel and RCC foundation blocks for auto coupling & delivery bend & suitable to install pump set in new sump, PMU etc. complete as per IS, Tender Drawings and Specification and also including in scope any other parts / accessories / fittings required to complete the work in all respects & satisfactory operation of pump set. Pump Capacity: 2400 m3/hr, Head: 19 m Motor Rating: 180 kW mini. (or higher rating as reco. by pump mfg.) Over all Efficiency at Duty: min. 75.0 %

Quantity3

Rate-

Amount -

Quantity3

Rate-

Amount -

Quantity3

Rate-

Amount -

Item Description as per 2.2.1 and of following size complete in all respect. Size: 900 mm NB (at Header after Flow Meter)

Quantity1

Rate-

Amount -

Quantity3

Rate-

Amount -

Item Description as per 3.1.1 and of following size complete in all respect. Size: 900 mm NB x 300 mm (L) (On header near BFV)

Quantity1

Rate-

Amount -

Quantity19850

Rate-

Amount -

Quantity7850

Rate-

Amount -

Quantity1

Rate-

Amount -

Quantity1

Rate-

Amount -

Quantity3

Rate-

Amount -

Item Description as per 5.3.1 and of following size complete in all respect. Size: 700 mm dia

Quantity21

Rate-

Amount -

Item Description as per 5.3.1 and of following size complete in all respect. Size: 900 mm dia

Quantity11

Rate-

Amount -

Item Description as per 5.3.1 and of following size complete in all respect. Size: 1000 mm dia

Quantity1

Rate-

Amount -

SLUICE GATE Supply, installation, testing and commissioning of Manual Gear Operated C.I. Sluice Gate conforming to AWWA C 501 or IS : 13349 - 1992 Class - 1 with rising spindle, single faced, wall thimble mounted, handwheel, flange back frame, head stock, Spindle with supports brackets having length as specified or to suit site condition, suitable for seating as well as unseating water head and as per specifications and complete in all respect. Size : 1200 mm X 1200 mm - approx. 7.0 m spindle length (at Inlet Pipe) - Conventional Bottom Closing or suitable Closing

Quantity1

Rate-

Amount -

BOX TYPE MANUAL MESH SCREEN Supply, Installation, Testing and Commissioning of Box Type Manual mesh Screen having following size, made of SS 304 material having round bars of size 9 mm dia. with clear bar opening as specified here below, suitably welded in outer frame of equal Leg SS angle of size 50 mm x 50 mm x 6 mm thick or higher, with intermediate support at required locations, complete as per specs. & shall also including followings: The screen shall be with SS perforated Screening Material Collection Box at bottom end of Screen having size as specified, fabricated from 3 mm thk. SS sheet, screen shall be suitable to slide complete screen through rollers between guide channel of MCP 400, embedded/ fixed in wall on both sides of RCC wall up to top of chamber with all necessary hardware, SS nuts, bolts & washers, sacrificial Brass lugs on sides, min. two lifting lugs/hooks & SS lifting chain having intermediate link/chain of 300 mm dia. or suitable higher size at every 1.5 m distance with shackle, etc. complete in all respects and provided with 1 set of cleaning rake with each screen complete as per specification and complete in all respect. Screen Size: 1900mm (W-or as per actual site) x 1900mm (H) x 300 mm (D) Screening Box size: 300 mm height with width & depth as per screen Opening: 50 mm x 50 mm sq. opening. (w/o Guide channel & MS supporting structure) (Note: Screen suitable for 2000 mm chamber width or to suit site requirement.)

Quantity1

Rate-

Amount -

SINGLE GIRDER EOT CRANE: SITC of Single girder type E.O.T. crane with electrically operated hoist, class II duty, geared travelling trolly with lift as specified here below complete with long travel rail track (40 sq.mm. bar), moving or cross girder, all three motions electrically operated by suitable rating motor IP54, control panel, & down pendant control block, brake, safety device, cables from motor to starter panel & other required accessoaries & manufactured and tested as per IS-807, IS-3938 & IS-3177, class-II, complete as per IS & Specifications. Capacity: 5 Ton, (at Pump House) Span: App.8.5 m (or as per site) Lift: 14.0 m or (or as per site) Bay length: App. 12 m (or as per site) Note: Minimum as specified capacity or higher as per requirement such that EOT crane capacity is min.1.25 times of the pump set OR single heaviest component to be lifted within pump house.

Quantity1

Rate-

Amount -

MONORAIL EOT WITH ELECTRIC CHAIN HOIST Supply, installation, testing & commissioning of Electrically Operated Chain Hoist & Electrically operated Trolley, suitable to operate on Mono Rail Girder having motorised motion in vertical lifting & cross travel, manufactured as per IS:6547-1972-Class-II & IS-3177- Class-II, complete with electrically operated chain hoist & Electically operated geared trolley, brake, chain-gear, motors, safety device, pendant push button, starter panel, cables from motor to starter panel and all other required accessories like limit switches, panel, power supply system (Fastoon cable type), fasteners, epoxy painting, etc. tested for over load as per IS complete as per specifications and complete in all respect. Capacity : 1 Ton. Min. (at Inlet chamber for Manual Screen) Lift : 11.00 m as mini. or as per site req. Bay Length: 6.0 m min. or as per site req. (w/o MONORAIL GIRDER & MS supporting structure) Note: (1) Minimum as specified capacity or higher as per requirement such that ECH capacity is min.1.25 times of the screen or single heaviest component to be lifted within Inlet chamber.

Quantity1

Rate-

Amount -

Quantity1

Rate-

Amount -

Quantity2000

Rate-

Amount -

Quantity2000

Rate-

Amount -

Quantity1

Rate-

Amount -

Quantity100

Rate-

Amount -

SITC of the Indoor Heat shrinkable Termination: SITC of Indoor H.T. cable end terminations Kit for 11 kV (E), 3C x 240 sq.mm. XLPE armoured cable with all accessories as required.

Quantity6

Rate-

Amount -

DISTRIBUTION TRANSFORMER SITC of 630kVA, 11/0.433 kV, Outdoor Transformer continuously rated, 3-phase, 50 Hz, OCTC, ONAN cooled, copper double wound core type, vector group Dyn11, Delta(HT)/Star(LT), Oil immersed winding with temperature rise in oil / winding 40/45 deg.C above design temperature with neutral brought out to connect to separate earthing including Terminal arrangement bushing / cable Box on HT side and cable box on LT side, first fill of oil along with Fittings & accessories as per Energy Efficiency level-1 of IS:1180 (Part-1):2021 and its latest amendments etc. and Tender Specification. Note: Transformer shall be suitable for parallel operation. Minimum requirement shall be as below: Both transformer shall have "Identical X/R ratio, phase angle shift, polarity, phase sequence, frequency, position of tap changer. Turns ratio & voltage ratio".

Quantity2

Rate-

Amount -

Quantity70

Rate-

Amount -

Supply and Installation of GI Chain link fencing frames with L angle/Channel post around Transformer yard etc. as per Specification and Drg.

Quantity30

Rate-

Amount -

SITC of 3.0 mtr wide gate with GI chain link as per Specification and Drg.

Quantity2

Rate-

Amount -

LOW VOLTAGE (LT) PANEL BOARD (PMCC) : SITC of PMCC Panel (50kA), compartmentalized, Stand mounted, operating height maximum 1800/1900 mm, Extensible on both ends, suitable for Manual & Auto operation -Local & through PLC/SCADA operation as per site conditions complete in all respects as per Tender SLD / Specification / IS and including following as minimum: (1) INCOMER 1&2: FP, 1000A, 50 KA Microprocessor EDO ACB LSIG with inbuilt RS 485 MODBUS communication with Digital Voltmeter with VSS, Digital PF Meter, Digital Ammeter with ASS, Resin Cast CT- Cl : 0.5,10VA, Digital MFM Cl. 0.5 with RS-485, Breaker Control Switch (TNC), A/M, L/R switch, Indicating lamps, Push buttons etc,. with electrical & mechanical interlocking between Incomers and buscoupler. (1.1) Surge protection device, 3P + N, Type 2 for lightning/surge protection. Load sensing CT in Incomer & Busbar for APFC panel along with Cl.-0.5. Constant voltage/control voltage transformer 1500VA, 415V/230V AC, with tapping +/-5% in steps of 2.5%, 32A DP MCB & 25A Power contactor. (2) BUS-COUPLER: One no. FP 1000A ACB (same as per Incomer) (2.1) 1000A TPN, EC grade AL Main busbars. (Busbars size as per 50KA fault level and Temperature rise with current density 0.8A/Sq.mm) (3) TRANSFORMER FIXED COMPENSATION FEEDER (25 KVAr): 2 Sets: Each comprising of 63A FP Thermal magnetic MCCB, Ind. Lamp, with Capacitor duty contactor,ON Delay timer, individual MCCB/MCB as per Tender SLD. (4) SOFT STARTER FOR 180 KW MOTOR : 3 NOS Each feeder comprising of Soft Starter with Internal/External bypass contactor for 180 kW Motor or higher as per pump manufacturer reco. with soft starter rating minimum (383A @ 50deg C) with suitable derating with detachable type door mounted display key pad and with 630A TPN microprocessor MCCB LSIG, 550A, AC3 duty Line contactor, Semi conductor fuse, Digital MFM Cl. 0.5 with RS-485, Resin Cast CT Cl: 0.5, PMU,Temperature Scanner with RS-485, SPP, A/M, L/R switch, Indicating lamps, Push buttons etc. (5) POWER FEEDER FOR 245 KVAR APFC-1: 1 NO: Each feeder comprising of 630A TPN TM EDO- ACB, 50kA with with Digital Ammeter, ASS, CT, Indicating lamp, etc.complete in all respects. (6) POWER FEEDER FOR 125 KVAR APFC-2: 1 NO: Each feeder comprising of 320A TPN TM MCCB, 50kA with with Digital Ammeter, ASS, CT, Indicating lamp, etc.complete in all respects. (7) 63A TPN TM MCCB FEEDER : 2 Nos. (2 nos. Spare) Each feeder comprising of 63A TPN Thermal Magnetic (TM) MCCB, with indicating lamp etc. (8) 32A TPN TM MCCB FEEDER : 3 Nos.(2nos. spare, 1no. Desilting Pump) Each feeder comprising of 32A TPN Thermal Magnetic (TM) MCCB, with indicating lamp etc. (9) 63A TPN TM MCCB FEEDER FOR ALL MCB FEEDERS: 2 sets: Incomer: 63A TPN Thermal Magnetic (TM) MCCB, with indicating lamp etc. 9.1) 8 nos. 32A 'C' curve 4P MCB feeders (for 1no. Ind LDB, PLC Panel, 2nos. EOT & 4 nos. spare feeders) 9.2) 1 nos. 32A 'C' curve 4P MCB with Time switch,32A contactor 4P,ON lamp feeders (for Outdoor LDB) 9.3) 4 nos. 16A DP MCB feeders (for single phase supply for 2nos. X'mer marshaling box, HT Panel & Spare.) (10) Multiplication relay as required for dry run protection of pumps. NOTE: 1). All MCCB shall be 50KA, Ics = 100% Icu, inbuilt protection with adj O/L and Adj.S/c (LSIG for MP MCCB),Extended rotary handle, Terminal spreader, Auxiliary Change over contact and trip contact as required.2) All MFM, ACB, Soft Starter,MPR,Temp.Scanner etc shall be with inbuilt RS 485.

Quantity1

Rate-

Amount -

Quantity1

Rate-

Amount -

Quantity1

Rate-

Amount -

Quantity2

Rate-

Amount -

Quantity310

Rate-

Amount -

3.5C x 240 sq. mm. A2XFY Cable (2 Runs for PMCC to APFC-2 Panel, 1 Runs for PMCC to APFC-1 Panel)

Quantity80

Rate-

Amount -

4C x 6 sq. mm. A2XFY(X) Cable (For 1nos. Indoor LDB, Outdoor LDB, 1nos. Portable Desilting Pump, WR-DB with TPN MCB at Pump House & for 6 nos. street light )

Quantity320

Rate-

Amount -

4C x 2.5 sq. mm. 2XWY/2XFY(X) Cable (For 1no. TPN MCB for Elect. Crane at Pump House, for ECH at Screen & PLC Panel)

Quantity100

Rate-

Amount -

2C x 2.5 sq. mm. Multi strand 2XWY(X) Cable (For HT Panel, for 2nos. APFC CT & X'mer marshaling box Single Phase Supply)

Quantity150

Rate-

Amount -

10C x 1.5 sq.mm. 2XWY(X )Cable (2Run Tr. to HT Panel control cable)

Quantity120

Rate-

Amount -

Quantity16

Rate-

Amount -

3.5C x 240 sq. mm. A2XFY Cable (2 Runs for PMCC to APFC-2 Panel, 1 Runs for PMCC to APFC-1 Panel)

Quantity6

Rate-

Amount -

4C x 6 sq. mm. A2XFY(X) Cable (For 1nos. Indoor LDB, Outdoor LDB, 1nos. Portable Desilting Pump, WR-DB with TPN MCB at Pump House & for 6 nos. street light )

Quantity20

Rate-

Amount -

4C x 2.5 sq. mm. 2XWY/2XFY(X) Cable (For 1no. TPN MCB for Elect. Crane at Pump House, for ECH at Screen & PLC Panel)

Quantity6

Rate-

Amount -

2C x 2.5 sq. mm. Multi strand 2XWY(X) Cable (For HT Panel, for 2nos. APFC CT & X'mer marshaling box Single Phase Supply)

Quantity10

Rate-

Amount -

10C x 1.5 sq.mm. 2XWY(X )Cable (2Run Tr. to HT Panel control cable)

Quantity8

Rate-

Amount -

Quantity20

Rate-

Amount -

300 x 100 mm - Ladder type

Quantity20

Rate-

Amount -

150 x 50 mm - Ladder type

Quantity50

Rate-

Amount -

Quantity30

Rate-

Amount -

Quantity100

Rate-

Amount -

Quantity150

Rate-

Amount -

Quantity30

Rate-

Amount -

CHEMICAL EARTHING SYSTEM SITC of Maintenance free chemical earthing (copper) with earthpit of minimum bore size dia. 225mm Safe Earthing Electrode consisting Pipe-in-Pipe Technology as per IS-3043:1987 /Tech spec. made of corrosion free Pipes having Outer pipe dia of 48 mm having 250 Micron copper plating, Inner corrosion free Hot dip galvanised (80 to 100 micron) pipe dia of 26 mm with copper flat strip type connection terminal 14mm dia with constant ohmic value surrounded by highly conductive corrosion resistant chemical compound with high charge dissipation suitable for electrical installation & of 3Mtr. length of Pipe with two nos. 25Kg. bag of Back filling compound.. (2 nos HT Panel, 2nos. Each for neutral of Tr.-1 & 2 & 2nos. PLC Panel) NOTE: Earthing Resistance value & date shall be painted on the chamber cover.

Quantity8

Rate-

Amount -

SITC of Maintenance free chemical earthing with earthpit of minimum bore size dia. 225mm Safe Earthing Electrode consisting Pipe-in-Pipe Technology as per IS-3043:1987 /Tech spec. made of corrosion free Hot dip Galvanised (min 150 Microns) Pipes having Outer pipe dia of 76 mm , Inner corrosion free Hot dip galvanised (80 to 100 micron) pipe dia of 26 mm with copper flat strip type connection terminal 14mm dia with constant ohmic value surrounded by highly conductive corrosion resistant chemical compound with high charge dissipation suitable for electrical installation & 3Mtr. length of Pipe with two nos. 25Kg. bag of Back filling compound. (2nos. Each for Tr.1 & Tr. 2 Body, PMCC & all elect. Equipments) NOTE: Earthing Resistance value & date shall be painted on the chamber cover.

Quantity8

Rate-

Amount -

Quantity8

Rate-

Amount -

Quantity312

Rate-

Amount -

Quantity20

Rate-

Amount -

Quantity190

Rate-

Amount -

Quantity15

Rate-

Amount -

SITC of HOT Dip Galvanized iron strip wire 8 SWG (For LDB, LCS, etc.) (8 SWG G.I Strip, 0.103 Kg/m, 0.103 x 200Mt.=20 Kg.)

Quantity20

Rate-

Amount -

Quantity100

Rate-

Amount -

As per Sr. No.-9.1 (b) SITC of Mains wiring with 3 wire 2.5 sq.mm as per tender specification & IS.

Quantity50

Rate-

Amount -

As per Sr. No.-9.1 (c) SITC of Mains wiring with 4 wire 1.5 sq.mm as per tender specification & IS.

Quantity50

Rate-

Amount -

As per Sr. No.-9.1 (d) SITC of Mains wiring with 4 wire 2.5 sq.mm as per tender specification & IS.

Quantity50

Rate-

Amount -

Quantity24

Rate-

Amount -

Quantity4

Rate-

Amount -

Quantity2

Rate-

Amount -

Quantity4

Rate-

Amount -

Quantity1

Rate-

Amount -

Quantity4

Rate-

Amount -

Quantity14

Rate-

Amount -

Item description as per Sr. No. 10.1 SITC of 7 watts LED Lamps integral type,cool white with PC diffuser suitable for B22 LAMP holder(For 1no. AUDA HT Room, 1 nos. at LT Room).

Quantity2

Rate-

Amount -

Quantity2

Rate-

Amount -

Quantity2

Rate-

Amount -

Quantity10

Rate-

Amount -

Quantity6

Rate-

Amount -

SITC of 40watt, Cat-III Post Top Lantern LED fitting comprises of 650 MM TOP Diameter, 120 degree beam angle with 3 Nos. Supporting Ribs and with 0.5mt. G.I. fitting pipe (for Gate light)

Quantity2

Rate-

Amount -

Quantity6

Rate-

Amount -

Quantity6

Rate-

Amount -

Quantity6

Rate-

Amount -

Quantity4

Rate-

Amount -

Quantity2

Rate-

Amount -

Quantity2

Rate-

Amount -

Quantity3

Rate-

Amount -

Supply and fixing of 20 W fluorescent lamp operated emergency light with maintenance free battery for 3 hours operation during mains power failure. (for 1no. LT Room)

Quantity1

Rate-

Amount -

Supply and laying of Synthetic Insulating Mat of Class - B of min. thickness 2.5mm as per IS:15652 and with good electrical insulation property for 11kV/22KV as per site requirement. (for HT Panel)

Quantity3

Rate-

Amount -

Supply and laying of Synthetic Insulating Mat of Class - A of min. thickness 2mm as per IS:15652 and with good electrical insulation property for 1.1KV/3.3KV as per site requirement. (for LT Panel)

Quantity12

Rate-

Amount -

Providing pair of rubber hand gloves ISI make suitable for working on 22 KV supply

Quantity2

Rate-

Amount -

Quantity1

Rate-

Amount -

Quantity3

Rate-

Amount -

Quantity1

Rate-

Amount -

Quantity1

Rate-

Amount -

ELECTRO MAGNETIC FLOWMETER Supply, installation, testing and commissioning of remote type Full Bore Electromagnetic flow meter comprising of IP-68 Sensor, IP-65/66 remote transmitter with 20 m cable between sensor and transmitter,Panel mounted flow indicator cum Totalizer along with all mounting accessories,complete as require , hardware, etc. and joing with pipe & associated items like valve, expansion bellows, complete in all respect and as per specs and shall have following size and measurement range. The scope also includes necessary connection with header pipe. Meter Size : 900 mm (At Header Line) Pipe size: 900 mm Flow Measurement Range: 1200-5000 m3/hr Pipe Material : C.I

Quantity1

Rate-

Amount -

PLC BASED INSTRUMENT CONTROL PANEL Supply, Installation, Testing & Commissioning of PLC Based Instrument control Panel with 7" Color Touch Screen HMI, 4G GPRS modem for Future Remote Data transmission to central SCADA of Client/ AUDA, Modbus Communication Port for MFF, Multiplication relay for Dry run protection of pump, etc. Instrument Control Panel '(PLC Enclosure / Panel ) with necessary PLC based logic and wiring , Min 1 nos. flow indicator/totalizer, Min. 1 no. process Indicator, Min 2 no. analog signal multiplier, Min. 1 kVA UPS (with 30 min backup alongwith filter for harmonic, suitable rating SMF batteries alongwith battery charger, cabling between UPS and battery and all other accessories as per standard), etc. complete in all respects and as per specs PLC having minimum I/O count of 20DI / 10 DO / 4AI / 0AO. All work shall be carrierd out complete in all respects and as per tender specifications.

Quantity1

Rate-

Amount -

INSTRUMENT CABLE & ACCESSORIES 'Supply, Laying, Installation, Connection, Termination, Testing & Commissioning of Instrument Cables, along with cable glands, lugs, cable trays, required junction boxes, fittings and accessores as per specs. The unit rate shall include a. Supply, loading & unloading of the cable at site from store. B. Shifitng of cable from site store to place of installation. c. Fixing of cable clamps, brackets, supports, route markers etc. where ever required to fix the cables safely. d. Excavation, back filling and levelling of ground alongwith laying of fine sand, protection bricks and other necessary civil material for laying cables outside the building. e. Testing and submission of sketches & reports of all the cables laid. POWER CABLE 3C X 1.5sq.mm.

Quantity25

Rate-

Amount -

CONTROL CABLE 10C X 1.5 sq.mm.

Quantity60

Rate-

Amount -

SIGNAL CABLE 1P X 1.5sq.mm.

Quantity20

Rate-

Amount -

Quantity30

Rate-

Amount -

Quantity2

Rate-

Amount -

CONTROL CABLE 10C X 1.5sq.mm

Quantity6

Rate-

Amount -

SIGNAL CABLE 1P X 1.5sq.mm.

Quantity6

Rate-

Amount -

TEST EQUIPMENT Magger of range 0 -1000V

Quantity1

Rate-

Amount -

Quantity1

Rate-

Amount -

Quantity1

Rate-

Amount -

OFFICE FURNITURE Office table of size 1200 mm X 600 mm

Quantity1

Rate-

Amount -

Steel Office chair

Quantity3

Rate-

Amount -

Steel cupboard (6 feet H x 3.5 feet W x 1.0 feet 4 inch D)

Quantity1

Rate-

Amount -

ELECTRO-MECHANICAL AND INSTRUMENTATION WORKS SWPS AT SANATHAL TALAV SEWAGE SUBMERSIBLE NON CLOG PUMP-MOTOR SET Supply, Installation, Testing and Commissioning of Submersible NC Pump-Motor set suitable for sewage application with semi-open or suitable type Impeller & wear Rings in CF8M with CI FG 260 Casing & casing cover, SS 410 shaft & with motor suitable for 3-Phase, 415 V, 50 Hz., AC induction Air filled dry type submersible motor of mini. rating as specified having max. 1000 RPM sync. speed, insulation Class 'F' With temp. rise limited to class B and IP-68 protection. The scope shall include all required accessories viz. automatic coupling device, SS-304 heavy duty & of suitable size double guide pipes of length to suit the sump height with required supports, SS-304 or suitable stainless steel grade Chain with shackles (shall be with dual hook / shackles of 300 mm or suitable higher size at app. every 1.5m C-C distance) & of length as per sump height + min. 3m, Submersible Power & control cable (copper flexible & stranded type conductor of reqd. cores & size for each pump motor set) & length of sump height + min. 20 m long each run with necessary electrical termination connection at junction box / starter panel and RCC foundation blocks for auto coupling & delivery bend & suitable to install pump set in new sump, PMU etc. complete as per IS, Tender Drawings and Specification and also including in scope any other parts / accessories / fittings required to complete the work in all respects & satisfactory operation of pump set. Pump Capacity: 2400 m3/hr, Head: 19 m Motor Rating: 180 kW mini. (or higher standard rating as reco. by pump manufacturer) Over all Efficiency at Duty: min. 75.0 %

Quantity4

Rate-

Amount -

Quantity4

Rate-

Amount -

Quantity4

Rate-

Amount -

Item Description as per 2.1.1 and of following size complete in all respect. Size: 1000 mm NB (at Header after Flow Meter)

Quantity1

Rate-

Amount -

Supply, installation, testing and commissioning of Flange ends Expansion Bellow (PN 1.0) as per EJMA standards and as per specs. and complete in all respect. Size: 700 mm x 300 mm (L) (on Del. of each pump)

Quantity4

Rate-

Amount -

Item Description as per 3.1.1 and of following size complete in all respect. Size: 1000 mm x 300 mm (L) (On header near BFV)

Quantity1

Rate-

Amount -

CI PIPE AND SPECIALS Supply, installation, connection, testing and commissioning of double flanged delivery and header CI pipes conforming to IS 1536 / 1537, Class B with connection and complete in all respect. Size: 700 mm dia. & above

Quantity24400

Rate-

Amount -

Quantity11850

Rate-

Amount -

Quantity1

Rate-

Amount -

Quantity1

Rate-

Amount -

Quantity4

Rate-

Amount -

Item Description as per 4.3.1 and of following size complete in all respect. Size: 700 mm dia

Quantity24

Rate-

Amount -

Item Description as per 4.3.1 and of following size complete in all respect. Size: 1000 mm dia

Quantity13

Rate-

Amount -

Item Description as per 4.3.1 and of following size complete in all respect. Size: 1200 mm dia

Quantity1

Rate-

Amount -

SLUICE GATE Supply, installation, testing and commissioning of Manual Gear Operated C.I. Sluice Gate conforming to AWWA C 501 or IS : 13349 - 1992 Class - 1 with rising spindle, single faced, wall thimble mounted, handwheel, flange back frame, head stock, Spindle with supports brackets having length as specified or to suit site condition, suitable for seating as well as unseating water head and as per specifications and complete in all respect. Size : 1600 mm X 1600 mm - approx. 5.0 m spindle length (at Inlet Pipe) - Conventional Bottom Closing or suitable Closing

Quantity1

Rate-

Amount -

Quantity1

Rate-

Amount -

SINGLE GIRDER EOT CRANE: Providing and errecting Single girder type E.O.T. crane with electrically operated hoist, class II duty, geared travelling trolly with lift as specified here below complete with long travel rail track (40 sq.mm. bar), moving or cross girder, all three motions electrically operated by suitable rating motor IP54, control panel, & down pendant control block, brake, safety device, cables from motor to starter panel & other required accessoaries & manufactured and tested as per IS-807, IS-3938 & IS-3177, class-II, complete as per IS & Specifications. Capacity: min. 5 Ton, (at Pump House) Span: App.8.5 m (or as per site) Lift: 14.0 m or (or as per site) Bay length: App. 12 m (or as per site) Note: Minimum as specified capacity or higher as per requirement such that EOT crane capacity is min.1.25 times of the pump set OR single heaviest component to be lifted within pump house.

Quantity1

Rate-

Amount -

Quantity1

Rate-

Amount -

Quantity1

Rate-

Amount -

Quantity2000

Rate-

Amount -

Quantity2000

Rate-

Amount -

Quantity1

Rate-

Amount -

Quantity1

Rate-

Amount -

Quantity100

Rate-

Amount -

SITC of the Indoor Heat shrinkable Termination: SITC of Indoor H.T. cable end terminations Kit for 11 kV (E), 3C x 240 sq.mm. XLPE armoured cable with all accessories as required.

Quantity5

Rate-

Amount -

SITC of the Outdoor Heat shrinkable Termination: SITC of Outdoor H.T. cable end terminations Kit for 11 kV (E), 3C x 240 sq.mm. XLPE armoured cable.

Quantity1

Rate-

Amount -

DISTRIBUTION TRANSFORMER SITC of 800kVA, 11/0.433 kV, Outdoor Transformer continuously rated, 3-phase, 50 Hz, OCTC, ONAN cooled, copper double wound core type, vector group Dyn11, Delta(HT)/Star(LT), Oil immersed winding with temperature rise in oil / winding 40/45 deg.C above design temperature with neutral brought out to connect to separate earthing including Terminal arrangement bushing / cable Box on HT side and cable box on LT side, first fill of oil along with Fittings & accessories as per Energy Efficiency level-1 of IS:1180 (Part-1):2021 and its latest amendments etc. and Tender Specification. Note: Transformer shall be suitable for parallel operation. Minimum requirement shall be as below: Both transformer shall have " Identical X/R ratio, phase angle shift, polarity, phase sequence, frequency, position of tap changer. Turns ratio & voltage ratio".

Quantity2

Rate-

Amount -

Quantity110

Rate-

Amount -

Supply and Installation of GI Chain link fencing frames with L angle/Channel post around Transformer yard etc. as per Specification and Drg.

Quantity50

Rate-

Amount -

SITC of 3.0 mtr wide gate with GI chain link as per Specification and Drg.

Quantity3

Rate-

Amount -

LOW VOLTAGE (LT) PANEL BOARD (PMCC) : SITC of PMCC Panel (50kA), compartmentalized, Stand mounted, operating height maximum 1800/1900 mm, Extensible on both ends, suitable for Manual & Auto operation -Local & through PLC/SCADA operation as per site conditions complete in all respects as per Tender SLD / Specification / IS and including following as minimum: (1) INCOMER 1&2: FP, 1250A, 50 KA Microprocessor EDO ACB LSIG with inbuilt RS 485 MODBUS communication with Digital Voltmeter with VSS, Digital PF Meter, Digital Ammeter with ASS, Resin Cast CT- Cl : 0.5,10VA, Digital MFM with RS-485 Cl. 0.5, Breaker Control Switch (TNC), A/M, L/R switch, Indicating lamps, Push buttons etc,. with electrical & mechanical interlocking between Incomers and buscoupler. (1.1) Surge protection device, 3P + N, Type 2 for lightning/surge protection. Load sensing CT in Incomer & Busbar for APFC panel along with Cl.-0.5. Constant voltage/control voltage transformer 1500VA, 415V/230V AC, with tapping +/-5% in steps of 2.5%, 32A DP MCB & 25A Power contactor. (2) BUS-COUPLER: One no. FP 1250A ACB (same as per Incomer) (2.1) 1250A TPN, EC grade AL Main busbars. (Busbars size as per 50KA fault level and Temperature rise with current density 0.8A/Sq.mm) (3) TRANSFORMER FIXED COMPENSATION FEEDER (35 KVAr): 2 Sets: Each comprising of 100A FP Thermal magnetic MCCB, Ind. Lamp, with Capacitor duty contactor,ON Delay timer, individual MCCB/MCB as per Tender SLD. (4) SOFT STARTER FOR 180 KW MOTOR : 4 NOS Each feeder comprising of Soft Starter with Internal/External bypass contactor for 180 kW Motor or higher as per pump manufacturer reco. with soft starter rating minimum (383A @ 50deg C) with suitable derating with detachable type door mounted display key pad and with 630A TPN microprocessor MCCB LSIG, 550A, AC3 duty Line contactor, Semi conductor fuse, Digital MFM with RS-485 Cl. 0.5, Resin Cast CT Cl: 0.5, PMU,Temperature Scanner with RS-485, SPP, A/M, L/R switch, Indicating lamps, Push buttons etc. (5) 245 KVAR APFC POWER FEEDER: 2 NOS: Each feeder comprising of 630A TPN TM ACB, 50kA with with Digital Ammeter, ASS, CT, Indicating lamp, etc.complete in all respects. (6) 63A TPN TM MCCB FEEDER : 2 Nos. (2 nos. Spare) Each feeder comprising of 63A TPN Thermal Magnetic (TM) MCCB, with indicating lamp etc. (7) 32A TPN TM MCCB FEEDER : 3 Nos.(1no. Portable Desilting Pump, 2nos. spare) Each feeder comprising of 32A TPN Thermal Magnetic (TM) MCCB, with indicating lamp etc. (8) 63A TPN TM MCCB FEEDER FOR ALL MCB FEEDERS: 2 sets: Incomer: 63A TPN Thermal Magnetic (TM) MCCB, with indicating lamp etc. 8.1) 8 nos. 32A 'C' curve 4P MCB feeders (for 1no. Ind LDB, PLC Panel, 2nos. EOT & 4 nos. spare feeders) 8.2) 1 nos. 32A 'C' curve 4P MCB with Time switch,32A contactor 4P,ON lamp feeders (for Outdoor LDB) 8.3) 4 nos. 16A DP MCB feeders (for single phase supply for 2nos. X'mer marshaling box, HT Panel & Spare.) (9) Multiplication relay as required for dry run protection of pumps. NOTE: 1). All MCCB shall be 50KA, Ics = 100% Icu, inbuilt protection with adj O/L and Adj.S/c (LSIG for MP MCCB),Extended rotary handle, Terminal spreader, Auxiliary Change over contact and trip contact as required.2) All MFM, ACB, Soft Starter,MPR,Temp.Scanner etc shall be with inbuilt RS 485.

Quantity1

Rate-

Amount -

SITC of 245 KVAR at 415V, APFC Panel,compartmentalised, Stand mounted, extensible type on both sides with Horizontal bus bar arrangement as per site requirement & complete in all respects as per SLD / Specification / IS and including following as minimum: (1) INCOMER: 1.1 630A, TPN, 50 KA TM ACB LSIG with Digital Voltmeter with VSS, Digital Ammeter with ASS, Resin Cast CT- Cl : 1.0,10VA, Breaker Control Switch (TNC), A/M, L/R switch, Indicating lamps, Push buttons etc. 1.2 Microprocessor based APFC Relay,144sq.mm, 12 STEP with RS 485 with minimum operating current 10mA. 2. OUTGOING CAPACITOR FEEDER: Capacitor feeder of following rating comprising of TPN MCCB/MCB with ON & TRIP Indication, Capacitor duty contactor,Heavy duty MPP / gas filled capacitor unit, A/M Switch, ON Delay timer,ON / OFF Push button, ON, TRIP, Auto & Manual Indication lamp etc. as per Tender SLD& Specification 2.1 50 KVAR FEEDER: 4 NOS 2.2 25 KVAR FEEDER: 1 NO 2.3 10 KVAR FEEDER: 1 NO 2.4 5 KVAR FEEDER: 1 NO 2.5 2 KVAR FEEDER: 2 NOS 2.6 1 KVAR FEEDER: 1 NO 2.7.Two nos. Vacant feeder suitable for 1-50KVAr and 1-25KVAr to be provided. NOTE: 1. cooling/exhaust fan : Heavy duty 8" Metalic Housing and Metal Impeller / Blade / Vanes of Minimum2nos. or higher as required at the top of the panel with canopy/hood. 2. For Capacitors of rating ≤ 5 KVAr only, All types viz. APP/MPP/Gas Filled are acceptable.

Quantity2

Rate-

Amount -

Quantity2

Rate-

Amount -

Quantity450

Rate-

Amount -

3.5C x 240 sq. mm. A2XFY Cable (2 Runs for PMCC to APFC Panel)

Quantity90

Rate-

Amount -

4C x 6 sq. mm. A2XFY(X) Cable (For 1no. Indoor LDB, Outdoor LDB, 1no. Portable Desilting Pump Panel, WR-DB with TPN MCB at Pump House)

Quantity120

Rate-

Amount -

4C x 2.5 sq. mm. 2XWY/2XFY(X) Cable (For 1no. TPN MCB for Elect. Crane at Pump House, for ECH at Screen, 1no. Portable Desilting Pump, PLC Panel & for 6 nos. street light)

Quantity330

Rate-

Amount -

2C x 2.5 sq. mm. Multi strand 2XWY(X) Cable (For HT Panel, for 2nos. APFC CT & X'mer marshaling box Single Phase Supply)

Quantity150

Rate-

Amount -

10C x 1.5 sq.mm. 2XWY(X )Cable (2Run Tr. to HT Panel control cable)

Quantity120

Rate-

Amount -

Quantity20

Rate-

Amount -

3.5C x 240 sq. mm. A2XFY Cable (2 Runs for PMCC to APFC Panel)

Quantity8

Rate-

Amount -

4C x 6 sq. mm. A2XFY(X) Cable (For 1no. Indoor LDB, Outdoor LDB, 1no. Portable Desilting Pump Panel, WR-DB with TPN MCB at Pump House)

Quantity8

Rate-

Amount -

4C x 2.5 sq. mm. 2XWY/2XFY(X) Cable (For 1no. TPN MCB for Elect. Crane at Pump House, for ECH at Screen, 1no. Portable Desilting Pump, PLC Panel & for 6 nos. street light)

Quantity20

Rate-

Amount -

2C x 2.5 sq. mm. Multi strand 2XWY(X) Cable (For HT Panel, for 2nos. APFC CT & X'mer marshaling box Single Phase Supply)

Quantity10

Rate-

Amount -

10C x 1.5 sq.mm. 2XWY(X )Cable (2Run Tr. to HT Panel control cable)

Quantity8

Rate-

Amount -

Quantity20

Rate-

Amount -

300 x 100 mm - Ladder type

Quantity20

Rate-

Amount -

150 x 50 mm - Ladder type

Quantity50

Rate-

Amount -

Quantity30

Rate-

Amount -

Quantity100

Rate-

Amount -

Quantity150

Rate-

Amount -

Quantity30

Rate-

Amount -

Quantity10

Rate-

Amount -

Quantity10

Rate-

Amount -

Quantity8

Rate-

Amount -

Quantity312

Rate-

Amount -

Quantity20

Rate-

Amount -

Quantity190

Rate-

Amount -

Quantity15

Rate-

Amount -

SITC of HOT Dip Galvanized iron strip wire 8 SWG (For LDB, LCS, etc.) (8 SWG G.I Strip, 0.103 Kg/m, 0.103 x 200Mt.=20 Kg.)

Quantity20

Rate-

Amount -

Quantity100

Rate-

Amount -

As per Sr. No.-9.1 (b) SITC of Mains wiring with 3 wire 2.5 sq.mm as per tender specification & IS.

Quantity50

Rate-

Amount -

As per Sr. No.-9.1 (c) SITC of Mains wiring with 4 wire 1.5 sq.mm as per tender specification & IS.

Quantity50

Rate-

Amount -

As per Sr. No.-9.1 (d) SITC of Mains wiring with 4 wire 2.5 sq.mm as per tender specification & IS.

Quantity50

Rate-

Amount -

Quantity23

Rate-

Amount -

Quantity3

Rate-

Amount -

Quantity2

Rate-

Amount -

Quantity3

Rate-

Amount -

Quantity1

Rate-

Amount -

Quantity4

Rate-

Amount -

Quantity13

Rate-

Amount -

Item description as per Sr. No. 10.1 SITC of 7 watts LED Lamps integral type,cool white with PC diffuser suitable for B22 LAMP holder(For 1no. AUDA HT Room, 1 nos. at LT Room).

Quantity2

Rate-

Amount -

Quantity2

Rate-

Amount -

Quantity2

Rate-

Amount -

Quantity10

Rate-

Amount -

Quantity6

Rate-

Amount -

SITC of 40watt, Cat-III Post Top Lantern LED fitting comprises of 650 MM TOP Diameter, 120 degree beam angle with 3 Nos. Supporting Ribs and with 0.5mt. G.I. fitting pipe (for Gate light)

Quantity2

Rate-

Amount -

Quantity6

Rate-

Amount -

Quantity6

Rate-

Amount -

Quantity6

Rate-

Amount -

Quantity4

Rate-

Amount -

Quantity2

Rate-

Amount -

Quantity2

Rate-

Amount -

Quantity3

Rate-

Amount -

Supply and fixing of 20 W fluorescent lamp operated emergency light with maintenance free battery for 3 hours operation during mains power failure. (for 1no. LT Room)

Quantity1

Rate-

Amount -

Supply and laying of Synthetic Insulating Mat of Class - B of min. thickness 12mm as per IS:15652 and with good electrical insulation property for 11kV/22KV as per site requirement. (for HT Panel)

Quantity3

Rate-

Amount -

Supply and laying of Synthetic Insulating Mat of Class - A of min. thickness 4mm as per IS:15652 and with good electrical insulation property for 1.1KV/3.3KV as per site requirement. (for LT Panel)

Quantity12

Rate-

Amount -

Providing pair of rubber hand gloves ISI make suitable for working on 22 KV supply

Quantity2

Rate-

Amount -

Quantity1

Rate-

Amount -

Quantity4

Rate-

Amount -

Quantity1

Rate-

Amount -

Quantity1

Rate-

Amount -

ELECTRO MAGNETIC FLOWMETER Supply, installation, testing and commissioning of remote type Full Bore Electromagnetic flow meter comprising of IP-68 Sensor, IP-65/66 remote transmitter with 20 m cable between sensor and transmitter,Panel mounted flow indicator cum Totalizer along with all mounting accessories,complete as require , hardware, etc. and joing with pipe & associated items like valve, expansion bellows, complete in all respect and as per specs and shall have following size and measurement range. The scope also includes necessary connection with header pipe. Meter Size :1000 mm (At Header Line) Pipe size: 1000 mm Flow Measurement Range: 1500-7500 m3/hr Pipe Material : C.I.

Quantity1

Rate-

Amount -

PLC BASED INSTRUMENT CONTROL PANEL Supply, Installation, Testing & Commissioning of PLC Based Instrument control Panel with 7" Color Touch Screen HMI, 4G GPRS modem for Future Remote Data transmission to central SCADA of Client/ AUDA, Modbus Communication Port for MFF, Multiplication relay for Dry run protection of pump, etc. Instrument Control Panel '(PLC Enclosure / Panel ) with necessary PLC based logic and wiring , Min 1 nos. flow indicator/totalizer, Min. 1 no. process Indicator, Min 2 no. analog signal multiplier, Min. 1 kVA UPS (with 30 min backup alongwith filter for harmonic, suitable rating SMF batteries alongwith battery charger, cabling between UPS and battery and all other accessories as per standard), etc. complete in all respects and as per specs PLC having minimum I/O count of 20DI / 10 DO / 4AI / 0AO. All work shall be carrierd out complete in all respects and as per tender specifications.

Quantity1

Rate-

Amount -

Quantity25

Rate-

Amount -

CONTROL CABLE 10C X 1.5 sq.mm.

Quantity80

Rate-

Amount -

SIGNAL CABLE 1P X 1.5sq.mm.

Quantity20

Rate-

Amount -

Quantity30

Rate-

Amount -

Quantity2

Rate-

Amount -

CONTROL CABLE 10C X 1.5sq.mm

Quantity8

Rate-

Amount -

SIGNAL CABLE 1P X 1.5sq.mm.

Quantity6

Rate-

Amount -

TEST EQUIPMENT Magger of range 0 -1000V

Quantity1

Rate-

Amount -

Quantity1

Rate-

Amount -

Quantity1

Rate-

Amount -

OFFICE FURNITURE Office table of size 1200 mm X 600 mm

Quantity1

Rate-

Amount -

Steel Office chair

Quantity3

Rate-

Amount -

Steel cupboard (6 feet H x 3.5 feet W x 1.0 feet 4 inch D)

Quantity1

Rate-

Amount -

Shifting of Utilities Manufacturing, testing, supplying, loading, transporting to worksite, unloading, lowering, laying and jointing R. C. C. pipes in SRC Cement of following class with Socket and spigot joints as per IS 458 -2021 including EPDM Rubber ring as per IS 5382-1985 etc. comp. As Directed by Engineering in charge. (a) 300 mm dia NP3 class

Quantity50

Rate-

Amount -

(b) 450 mm dia NP3 class

Quantity50

Rate-

Amount -

Quantity50

Rate-

Amount -

(d) 900 mm dia NP3 class

Quantity50

Rate-

Amount -

Providing and laying controlled cement concrete M20 for foundation and superstructure with vibrating, curing etc. complete including the cost of form work but excluding the cost of reinforcement for RCC work stated below etc. complete at any height as directed. 'i) Slab

Quantity100

Rate-

Amount -

ii) Wall

Quantity100

Rate-

Amount -

Providing And Jointing Stoneware Pipes Incl. Excavation Up to 2 Mt. Refilling, Transporting Pipes To Work Site, Unloading, Lowering In Trench, jointing material Such As Cement, sand, Hemp Bitumen As Directed, Incl. Watering The Trenches Spreading And Carting away Of Surplus material as directed by engineer in charge. (a) 150 mm dia.

Quantity100

Rate-

Amount -

(b) 230 mm dia.

Quantity100

Rate-

Amount -

Making connection to the ex.M.H. in running sewer incl. Dewatering and other required machinery etc. of following dia pipes at any convenient time. All damaged work shall be well repaired as per instructions. etc. complete. a) 150mm dia to 300mm dia

Quantity20

Rate-

Amount -

b) 400mm to 600 mm dia.

Quantity20

Rate-

Amount -

c) 700 mm to 900 mm dia.

Quantity20

Rate-

Amount -

Providing and supplying D. I. K-9 grade pipes with EPDM gasket for following nominal bore diameter with internal cement mortar lining including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to departmental stores, stacking etc. complete. (IS 8329-2000) '300 mm dia

Quantity100

Rate-

Amount -

350 mm dia

Quantity100

Rate-

Amount -

400 mm dia

Quantity100

Rate-

Amount -

450 mm dia

Quantity100

Rate-

Amount -

500 mm dia

Quantity100

Rate-

Amount -

600 mm dia

Quantity100

Rate-

Amount -

700 mm dia

Quantity100

Rate-

Amount -

800 mm dia

Quantity50

Rate-

Amount -

900 mm dia

Quantity50

Rate-

Amount -

Lowering, laying and jointing DI pipes of various classes with specials of following diameters in proper position, grade and alignment as directed by Engineer-in-charge including hydraulic testing etc. comp. '300 mm dia

Quantity100

Rate-

Amount -

350 mm dia

Quantity100

Rate-

Amount -

400 mm dia

Quantity100

Rate-

Amount -

450 mm dia

Quantity100

Rate-

Amount -

500 mm dia

Quantity100

Rate-

Amount -

600 mm dia

Quantity100

Rate-

Amount -

700 mm dia

Quantity100

Rate-

Amount -

800 mm dia

Quantity50

Rate-

Amount -

900 mm dia

Quantity50

Rate-

Amount -

P/F with lead joints the CI/MS fitting over cut ends of existing C.I/M.S. Pipes by prior jute caulking pouring lead and caulking against to finish properly a) 100 mm dia

Quantity20

Rate-

Amount -

b) 150 mm dia

Quantity20

Rate-

Amount -

c) 200 mm dia

Quantity20

Rate-

Amount -

d) 250 mm dia

Quantity20

Rate-

Amount -

e) 300 mm dia.

Quantity20

Rate-

Amount -

f) 350 mm dia

Quantity20

Rate-

Amount -

g) 400 mm dia

Quantity10

Rate-

Amount -

h) 450 mm dia

Quantity10

Rate-

Amount -

i) 500 mm dia

Quantity10

Rate-

Amount -

j) 600 mm dia

Quantity10

Rate-

Amount -

k) 700 mm dia

Quantity10

Rate-

Amount -

Connecting the collapsed water supply pipe line of following diameter as soon as possible bases, recovery including all allied works like carting necessary pipe pieces from owner stors, cutting the fractured ends to proper shape, pumping out water working in wet condition, working in at an instructured specific time of day or night etc. complete in any length. a) 100 mm dia

Quantity10

Rate-

Amount -

b) 150 mm dia

Quantity10

Rate-

Amount -

c) 200 mm dia

Quantity10

Rate-

Amount -

d) 250 mm dia

Quantity10

Rate-

Amount -

e) 300 mm dia.

Quantity10

Rate-

Amount -

f) 350 mm dia

Quantity10

Rate-

Amount -

g) 400 mm dia

Quantity10

Rate-

Amount -

h) 500 mm dia

Quantity10

Rate-

Amount -

i) 600 mm dia

Quantity10

Rate-

Amount -

Manufacture, supply & delivery ,including fixing of Ductile Iron flange socket spigot bends, tees, reducers of any other specials as per BS-EN-545/1995 class-A series K12 suitable for use with DI pipes manufactured per IS 8329/1994 delivery of specials is to be made to Store or site of works any where including all taxes, loading, unloading, carting, stacking, insurance, inspection charges, octroi etc. complete. Upto 300 mm dia

Quantity500

Rate-

Amount -

350 & Above dia

Quantity500

Rate-

Amount -

P/F hanging by any means to proper gradient to keep the temporary PVC lines (6kg/Sq.cm) flowing the following sizes of PVC pipes to maintain the drainage coming from distant bunglows to the chamber which is open from all sides causing collapse of flowing existing drainage incoming line to MH and keeping the pit free from rubbish. a) 110 mm dia.

Quantity200

Rate-

Amount -

b) 160 mm dia

Quantity200

Rate-

Amount -

c) 250 mm dia.

Quantity200

Rate-

Amount -

Removing silt from existing drainage line of any dia. meter in running water and carting the same up to all lead and lift as mention below etc. complete as per instruction of engineer in charge.

Quantity200

Rate-

Amount -

Repairing damaged M.H. and rasing M.H. up to road level incl. removing damaged brick work and repairing by brick masonry in C.M. 1:5 and plaster in C.M. 1:3 and fixing C.I. steps and existing MH sheet cover, removing the debris from MH and carting the same as directed. a) upto 0.15 mt (@ Two Coarse)

Quantity10

Rate-

Amount -

b) upto 0.35 mt (@ Four Coarse)

Quantity10

Rate-

Amount -

Demolition and disposal of unserviceable materials with all lead and lift.(i) Un reinforcement cement concrete

Quantity500

Rate-

Amount -

Demolition and disposal of stacking of serviceable materials and disposal of unserviceable materials with all lead and lift (i) R.C.C work

Quantity500

Rate-

Amount -

Demolition of Brick work and stone masonary including stacking of serviceable materials and disposal of unserviceable materials with all lead and lift.(i) In cement mortar.

Quantity500

Rate-

Amount -

Providing and operation dewatering Pump including fuel charges & operator Charges etc. as directed etc. comp. (Shift for Eight Hour) (For Each Pump Set, No payment should be allowed for non working condition of machinery )

Quantity1000

Rate-

Amount -

Constructing Slab Type M.H. Chamber of following size incl. excavation, refilling, brick bats cement concrete (1:5:10) of thickness 15 C.M., C.C. channel (1:2:4) of thickness 10 C.M., finished 15 mm thick cement plaster inside & outside (only for shaft) in C.M.1:3, finishing with cement slurry, P/F 4 mm dia. M.S Steel HDPE coated steps 35 cm c/c at 35 cm staggered Masonry in C.M. 1:5, RCC slab in CC 1 : 1.5 : 3 of thickness 23 C.M, including Cantering & reinforcement (double jalli at 15 C.M c/c bothway 12 mm dia.) but excluding the cost of Manhole seat cover etc. completed (Inside Clear, M.H. length should be parallel to the flow, For Pipe dia. = 800 mm i) 1 m x 1.4 m x 3 m

Quantity5

Rate-

Amount -

ii) 1 m x 1.4 m x 4 m

Quantity5

Rate-

Amount -

iii) 1 m x 1.4 m x 6 m

Quantity5

Rate-

Amount -

Extra rate over item of Constructing Slab Type M.H. Chamber of following size for constructing M.H. Chamber, per 1.00 Decimeter of additional depth or part there of etc. complete. (inside) and depth from For Pipe dia. = 800 mm i) 1 m x 1.4 m Manhole depth from 4.0 to 5. 0 m

Quantity5

Rate-

Amount -

ii) 1 m x 1.4 m Manhole depth from 6.0 to 7. 0 m

Quantity5

Rate-

Amount -

Constructing Scrapper Slab Type M.H. Chamber of following size incl. excavation, refilling, brick bats cement concrete (1:5:10) of thickness 15 C.M., C.C. channel (1:2:4) of thickness 10 C.M., finished 15 mm thick cement plaster inside (SRC) & outside (only for shaft) in C.M.1:3, finishing with cement slurry, P/F 4 mm dia M.S Steel HDPE coated steps 35 cm c/c at 35 cm staggered Masonry in C.M. 1:5, RCC slab in CC 1 : 1.5 : 3 of thickness 23 C.M, including Cantering & reinforcement (double jalli at 15 C.M c/c bothway 12 mm dia.) but excluding the cost of Manhole seat cover etc. completed (Inside Clear, M.H. length should be parallel to the flow, For Pipe dia. = 1000 mm i) 1.6 m x 1.6 m x 3 m

Quantity5

Rate-

Amount -

ii) 1.6 m x 1.6 m x 4 m

Quantity5

Rate-

Amount -

iii) 1.6 m x 1.6 m x 6 m

Quantity5

Rate-

Amount -

Extra rate over item of Constructing Scrapper Slab Type M.H. Chamber of following size for constructing M.H. Chamber, per 1.00 Decimeter of additional depth or part there of etc. complete. (inside) and depth from For Pipe dia. = 1000 mm i) 1.6 m x 1.6 m Manhole depth from 4.0 to 5. 0 m

Quantity5

Rate-

Amount -

ii) 1.6 m x 1.6 m Manhole depth from 6.0 to 7. 0 m

Quantity5

Rate-

Amount -

Quantity30

Rate-

Amount -

Environmental Items Covered under Environmental BOQ Trainings as per Capacity Building Program Training on Plans and Protocols

Quantity1

Rate-

Amount -

Orientation to Workers on EMP implementation

Quantity1

Rate-

Amount -

Environmental Quality Monitoring as per Environmental Quality Monitoring Plan Air Quality Monitoring Preconstruction stage – At four sensitive receptor locations along drainage routes, one time (24 hr.)

Quantity4

Rate-

Amount -

Preconstruction stage – At four SWPS locations, one time 24 hr.

Quantity4

Rate-

Amount -

Construction stage – At four sensitive receptor locations along drainage routes, once in a quarter during construction period of 24 months

Quantity18

Rate-

Amount -

Construction stage – At four locations once in a quarter during construction period of 24 months

Quantity32

Rate-

Amount -

Noise Level Monitoring Preconstruction stage – At four sensitive receptor locations along drainage routes, one time (24 hr.)

Quantity4

Rate-

Amount -

Preconstruction stage – At four locations one time 24 hr.

Quantity4

Rate-

Amount -

Construction stage – At four sensitive receptor locations along drainage routes, once in a quarter for construction period of 24 months

Quantity18

Rate-

Amount -

Construction stage – At four locations once in a quarter for construction period of 24 months

Quantity32

Rate-

Amount -

Surface Water Quality Monitoring Preconstruction stage – At four Storm Water receiving pond & Gota-Godhavi Canal, one time

Quantity4

Rate-

Amount -

Construction stage – At four Storm Water Receiving Pond and Gota-Godhavi Canal, Pre & Post Monsoon - 3 times a year during construction period of 2 yr.

Quantity24

Rate-

Amount -

Sediment Quality - Preconstruction stage - at four Storm Water receiving ponds, one time

Quantity4

Rate-

Amount -

Operation & Maintenance - Fixed Cost Carrying out Operation and Maintenance of works for a period of 5 years - Fixed Cost (Including Man Power, Repairs / Replacement / Maintenance of Electro-mechanical, piping & instrumentation / automation works including Spares, Consumables, Lubricants, etc. Repairs & Maintenance of Civil Structure, Storm Water Network with machineholes, storm water disposal pumping station) & to operate the Storm Water Disposal Scheme etc. (24 x 7) complete as per Tender Requirement. 1st Year

Quantity12

Rate-

Amount -

2nd Year

Quantity12

Rate-

Amount -

3rd Year

Quantity12

Rate-

Amount -

4th Year

Quantity12

Rate-

Amount -

5th Year

Quantity12

Rate-

Amount -

768 More

Evaluation Notes How It Works ?

Partners

Payment Type

Bank Certification Amount

Bank Guarantee Amount

Additional Info 1

Additional Info 2

Additional Info 3

Additional Info 4

Remarks

Potential Partner

Select Your Requirements

Help me get relevant partners for joint bidding

Help me get relevant material suppliers

Help me get project financing

Past Bidders
This list is curated from the bidders of the similar tenders in the past

Unlock the Tender details for free

Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
Awarded Ratexx%

Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
Awarded Ratexx%

Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
Awarded Ratexx%

Urban Development Authority Tender