Urban Development Authority Tender
Search for the latest Gujarat tenders online related to civil works, road & transport, pipelines and more easily here on BidAssist. Here you can get any and every tender that is posted on the eProcurement Gujarat website, minus the clutter. No need for a tender ID, as on BidAssist, you can view any Gujarat tender by merely typing Gujarat in the search box.
Costs
EMD
₹ 2,30,00,000Document Cost
₹ 18,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_AUDA_715204_1Bid Award Id
ViewTender No
Job No 42 / 2022-23Tender Authority
Urban Development Authority ViewPurchaser Address
-Website
http://eprocure.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
(iv) For depth greater than 4.5 m upto 6.0 m
70040
-
-
(v) For depth greater than 6.0 m upto 7.5 m
35835
-
-
(vi) For depth greater than 7.5 m upto 9.0 m
10645
-
-
(vii) For depth greater than 9.0 m upto 10.5 m
900
-
-
Providing bedding including ramming, watering, levelling consolidating etc. complete as per standard and instruction of engineer in charge with required quality sand brought from outside including all lead. (For Sewerage NEtwork Pipeline & House Connection Pipeline)
8285
-
-
Providing and laying ordinary cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and curing etc. complete. (without form work) (For house connection chamber).
310
-
-
Providing and laying controlled cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and curing etc. complete. (including cost of form work but excluding cost of reinforcement) (For bedding in Trunk Main)
7350
-
-
Providing and casting in situ mass cement concrete in 1:4:8 proportion using granite quartzite trap metal of size 25 mm to 40 mm including consolidation curing etc. complete. (For bedding in Trunk Main)
9550
-
-
Providing TMT Bar Fe-500D reinforcement bars for R. C. C. work including bending, binding and placing in position etc. complete. (For bedding in Trunk Main)
160
-
-
Providing and supplying lSI marked R.C.C. pipes with Sulphate Resisting Cement in standard lengths of following class and diameter suitable Socket and Spigot joints including EPDM Rubber Ring as per for IS 5382-1985 including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to site stacking etc. complete. (IS - 458/2021)
'Note : One rubber ring should be supplied with each full length socketed pipe.
RCC NP3 Pipe
(i) 150 mm dia
13040
-
-
(ii) 200 mm dia.
7910
-
-
(iii) 250 mm dia.
6270
-
-
(iv) 300 mm dia.
2970
-
-
(v) 450 mm dia.
1740
-
-
(vi) 600 mm dia.
2350
-
-
(vii) 900 mm dia.
1080
-
-
RCC NP4 Pipe
(i) 250 mm dia.
335
-
-
(ii) 300 mm dia.
215
-
-
(iii) 450 mm dia.
7355
-
-
(iv) 600 mm dia.
3025
-
-
(v) 900 mm dia.
1595
-
-
(vi) 1600 mm dia.
555
-
-
(vii) 2000 mm dia.
2445
-
-
(viii) 2200 mm dia.
2960
-
-
Lowering, laying and jointing R. C. C. pipes of following diameters in proper position, grade and alignment at all level as directed by Engineer-in-charge including labour, giving hydraulic testing as per lSI code etc. complete.
RCC Pipes
(i) 150 mm dia
13040
-
-
(ii) 200 mm dia.
7910
-
-
(iii) 250 mm dia.
6605
-
-
(iv) 300 mm dia.
3185
-
-
(v) 450 mm dia.
9095
-
-
(vi) 600 mm dia.
5375
-
-
(vii) 900 mm dia.
2675
-
-
(viii) 1600 mm dia.
555
-
-
(ix) 2000 mm dia.
2445
-
-
(x) 2200 mm dia.
2960
-
-
Providing & Constructing Precast RCC machinehole in RCC M-40 grade Controlled cement concrete as per drawing, in OPC including excavation, 80 mm thick P.C.C. in M-15, Reinforcement in TMT Fe-500D, Inside epoxy paint, PVC Foot steps, Providing & fixing FRC machinehole frame & cover complete etc. complete.
(a) For 150,200,250, 300,450 ,600 & 700 mm dia. Pipe (upto 4.0 mt. depth) (i) 1.2 dia x 2.0m Depth
935
-
-
(ii) 1.2 dia - 2.01 to 2.99 m Depth
155
-
-
(iii) 1.2 dia x 3.0m Depth
195
-
-
(iv) 1.2 dia - 3.01 to 3.99 m Depth
85
-
-
(b) For 150,200,250,300,450, 600 & 700 mm dia. Pipe (above 4.0 m depth) & For 900 mm dia.pipe for any depth
(i) 1.5 dia x 3.0m Depth
15
-
-
(ii) 1.5 dia - 3.01 to 3.99 m Depth
10
-
-
(iii) 1.5 dia x 4.0m Depth
85
-
-
(iv) 1.5 dia - 4.01 to 4.99 m Depth
30
-
-
(v) 1.5 dia x 5.0m Depth
35
-
-
(vi) 1.5 dia - 5.01 to 5.99 m Depth
10
-
-
(c) For 1600 mm dia. pipe for any depth
(i) 2.4 dia x 5.0m Depth
5
-
-
(ii) 2.4 dia - 5.01 to 5.99 m Depth
5
-
-
(iii) 2.4 dia x 6.0m Depth
10
-
-
(iv) 2.4 dia - 6.01 to 6.99 m Depth
10
-
-
(v) 2.4 dia x 7.0m Depth
5
-
-
(vi) 2.4 dia - 7.01 to 7.99 m Depth
5
-
-
Providing and constructing vertical drop arrangement for 0.6 m and more difference in height of invert level as required including providing and jointing special such as double T, Bend required 100 mm dia. stoneware pipe fixed in M-100 cement concrete at required level as drawing and as per specification etc. complete.
(i) Vertical drop arrangement as above upto 0.6 m height.
55
-
-
(ii) Extra over above for additional drop beyond 0.6 m
45
-
-
Extra rate over item of excavation of earth for excavation of asphalt pavement/RCC of thickness upto 0.3 mt. ( By any kind of breaker machine) including cost of operator , fuel & transportation etc. complete.
19665
-
-
Reinstatement of Bituminous road including with 37.5 mm thick BUSG with Asphalt VG 30 @ 15 kg/10 Sqm for grouting and 5 kg /10 Sqm for tack coat on base course with BT aggregate,200 mm thick WMM ,100 mm thick WBM with 22.4 to 53 mm aggregate,100 mm thick WBM with 45 mm to 63 mm aggregate,200 mm thick GSB I with necessary excavation/loosening and recompacting ground as per respective MoRTH specification and as directed by engineer in charge.
19665
-
-
Refilling the pipeline trenches including ramming, watering, consolidating disposal of surplus stuff as directed within a radius of 3 km.
826859.58
-
-
Shoring or timbering for trench with 50 mm thick planks and suitable size struts etc. complete.
174850
-
-
Temporary/Permanent plugging and blocking of sewer line,branch connections and diversion of flows and removal of all plugs,etc.
'(i) 300mm dia. & below sewer line
5
-
-
(ii) 400 to 500mm dia. sewer line
5
-
-
(iii) 900mm dia. sewer line
5
-
-
Dewatering by pumping set of required capacity including temporary platform carting pumping at site and fixing the same in position including all accessories, and fuel and labour etc. complete. as per specifications.
189060
-
-
Making connection to the existing machinerhole in running sewer including Dewatering and other required machinery etc. of following diameter pipes at any convenient time. All damaged work shall be well repaired as per instructions of engineer in charge etc. complete. (i) 150 mm to 300 mm dia.
5
-
-
(ii) 400 mm to 600 mm dia.
5
-
-
(iii) 700 mm to 900 mm dia.
5
-
-
Providing and erecting at the site of work steel ventilating column of 150 mm internal diameter and 12.20 Metre High from G.L. to bottom of top grill, including C.I. grill and base plate bolts and nuts etc.and excavation in foundation of size 120 cm. x 120 cm. x 165 cm. and filling the pit with first layer of cement concrete 1:3:6mix (1-cement:3- coarse sand :6-graded stone aggregate 20 mm nominal size) of 120 cm. x 120 cm. x 90 cm. and remaining pit with B.B.C.1:3:6mix (1-cement:3-coarsesand:6-Brick bats 40+50 mm size) and providing fillet in Cement concrete1:2:4 mix (1-cement:2-coarsesand:4-graded stone aggregate 20mm. nominal size) at G.L. and 3 coats of silver paint to ventilating column etc. complete.
30
-
-
Providing and supplying lSI marked only Standard length Stoneware pipes in standard lengths of following class and diameter including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to site stacking etc. complete. (IS - 651 / 1989)Class-AA (For House Connection) (i) 150 mm dia.
25040
-
-
Lowering, laying and jointing Stone Ware pipes of following diameter with cement joints in C. M. 1:1 proportion in proper position, grade and alignment at all level as directed by Engineer-in-charge including Jointing material etc. complete. (i) 150 mm dia.
25040
-
-
Manufacture, supply, delivery & Erecting of RCC Precast chambers (for house connection) with FRC Manhole frame & cover, Providing & fixing light duty, providing PVC foot steps fixing for size as mentioned below. The delivery of chambers with clamps, nuts, bolts is to be made The rates includes all taxes, loading, carting, unloading, stacking,including all taxes etc. complete excluding cost of Excavation, PCC & refilling.
(i) 0.6 m x0.6 mx0.9 m
2505
-
-
Drilling of 1300mm diameter Horizontal borehole for Carrier pipeline under road & ONGC pipeline all in strata with required lengthincluding fixing of 1200mm dia M.S.casing with 16 mm plate thickness pipe with pushing etc complete inclduing Providing & fixing carrier pipe under supervision of authority including Provinding, supplying & fixing of spacer at specified interval between Casing pipe and carrier pipe. construction of brick edge pavementincludingC:C encasing 1:3:6 in 10mtr length of pipe at both side. Construction of Manhole or required size with frame & cover for chamber with etc. complete with all material labour, hydraulic testing of pipe & etc complete. (i) With MS Casing Pipe+ Carrier Pipe 600 mm dia. RCC Pipe (For crossing is Viramgam-Ahmedabad State Highway-17 @ 1 location+For crossing ONGC line at two locations))
135
-
-
Construction of chambers in RCC M30 with Sulphate resistant cement with TMT Fe-500 reinforcement,PCC150 mm thick in M 15,15 mm thick inside cement plaster with Sulphate resistant cement in C.M.1:3 and including the cost of excavation, refilling and PVC foot steps including providing RCC Slab in one single piece with Providing & fixing of FRC (heavy duty) machinehole frame and cover etc. complete. For 2000 mm & 2200 mm dia RCC Trunk Main
Excavation
(i) For depth upto 1.5 m.
6300
-
-
(ii) For depth greater than 1.5 m upto 3.0 m
6300
-
-
(iii) For depth greater than 3.0 m upto 4.5 m
6300
-
-
(iv) For depth greater than 4.5 m upto 6.0 m
6300
-
-
(v) For depth greater than 6.0 m upto 7.5 m
6000
-
-
(vi) For depth greater than 7.5 m upto 9.0 m
3345
-
-
(vii) For depth greater than 9.0 m upto 10.5 m
730
-
-
PCC M-15
510
-
-
RCC M-30
(i) RCC Wall
5670
-
-
(ii) RC.C. Top Slab
550
-
-
(iii) RC.C. Base Slab
1160
-
-
(iv) RC.C. Beam
50
-
-
TMT Fe-500D Reinforcement
857
-
-
15 mm thick Inside Cement Plaster in CM 1 : 3
13895
-
-
Machinehole Frame & Cover
130
-
-
Refilling
16335
-
-
PVC steps
3265
-
-
Pushing Work
Providing and constructing RCC M-35 grade RCC box of following size in segments of required length including open excavation for thrust bed necessary formwork, concreting curing, vibrating, pushing etc. complete as per contractor's own design approved by competent authority based on approved GAD by competent authority.
The item includes
a) Providing and laying M-25 grade for cast in situ thrust bed and thrust wall with necessary excavation with shoring and strutting, formwork, curing, vibrating as per contractor's own design approved by competent authority.
b) Providing and casting RCC box in M-35 grade concrete.
c) Providing and fixing TMT-Fe-500D bars for RCC box including thrust bed and thrust wall including supplying, cleaning, cutting, bending and placing in position, lapping, binding with 16 SWG soft iron wire irrespective of locations and levels.
d) Providing front shield, intermediate shield, jointing, jacking rigs, sliding channels spacers etc. All the structural steel used except intermediate shields will be ownership of contractor after pushing work is completed. e) Pushing with hydraulic jack without disturbance to pavement including all necessary excavation for thrust bed and thrust wall, necessary shoring and strutting required, necessary dewatering required if any, excavation within the box with all necessary refilling upto ground level after pushing work completed including carting of extra earth upto a lead of 5 Kms. This also includes necessary labour cost for pushing and including necessary cost of hydraulic pipe and oil for hydraulic jacks including necessary depreciation cost of jack. f) Applying 2 coats of approved quality epoxy painting on top and sides of precast units after casting work completed including necessary groutings with cement between two precast units after pushing work is completed. '3.0 m. x3.0 m. (Ahmedabad-Viramgam State Highway)
60
-
-
Laying 3.0 mtr. dia. M.S. pipe with 32 mm Plate thickness (by Pushing method) of required length including open excavation for thrust bed necessary formwork, concreting curing, vibrating, pushing etc. complete as per contractor's own design approved by competent authority based on approved GAD by competent authority. (Ahmedabad- Bhavnagar Railway line)
'The item includes
a) Providing and laying M-25 grade for cast in situ thrust bed and thrust wall with necessary excavation with shoring and strutting, formwork, curing, vibrating as per contractor's own design approved by competent authority.
b) Laying of M.S. pipe by Pushing Method.
c) Providing and fixing TMT-Fe-500 bars for thrust bed and thrust wall including supplying, cleaning, cutting, bending and placing in position, lapping, binding with 16 SWG soft iron wire irrespective of locations and levels.
d) Providing front shield, intermediate shield, jointing, jacking rigs, sliding channels spacers etc. All the structural steel used except intermediate shields will be ownership of contractor after pushing work is completed. e) Pushing with hydraulic jack without disturbance to pavement including all necessary excavation for thrust bed and thrust wall, necessary shoring and strutting required, necessary dewatering required if any, excavation within the box with all necessary refilling upto ground level after pushing work completed including carting of extra earth upto a lead of 5 Kms. This also includes necessary labour cost for pushing and including necessary cost of hydraulic pipe and oil for hydraulic jacks including necessary depreciation cost of jack.
70
-
-
Laying 3.0 mtr. dia. M.S. pipe of 32 mm Plate thickness (by Pushing method) of required length including open excavation for thrust bed necessary formwork, concreting curing, vibrating, pushing etc. complete as per contractor's own design approved by competent authority based on approved GAD by competent authority. (For Crossing ONGC line)
The item includes
a) Providing and laying M-25 grade for cast in situ thrust bed and thrust wall with necessary excavation with shoring and strutting, formwork, curing, vibrating as per contractor's own design approved by competent authority.
b) Laying of M.S. pipe by Pushing Method.
c) Providing and fixing TMT-Fe-500 bars for thrust bed and thrust wall including supplying, cleaning, cutting, bending and placing in position, lapping, binding with 16 SWG soft iron wire irrespective of locations and levels.
d) Providing front shield, intermediate shield, jointing, jacking rigs, sliding channels spacers etc. All the structural steel used except intermediate shields will be ownership of contractor after pushing work is completed. e) Pushing with hydraulic jack without disturbance to pavement including all necessary excavation for thrust bed and thrust wall, necessary shoring and strutting required, necessary dewatering required if any, excavation within the box with all necessary refilling upto ground level after pushing work completed including carting of extra earth upto a lead of 5 Kms. This also includes necessary labour cost for pushing and including necessary cost of hydraulic pipe and oil for hydraulic jacks including necessary depreciation cost of jack.
25
-
-
Excavation for foundation for construction of RCC chambers for pushing work with shoring & strutting if required as per required gradient and line including all safety provision using site rails and stacking excavated stuff including up to all required lead cleaning the site etc. complete for all lift and strata as specified. In all sorts of Soil and murrum.
(i) For depth upto 1.5 m.
265
-
-
(ii) For depth greater than 1.5 m upto 3.0 m
265
-
-
(iii) For depth greater than 3.0 m upto 4.5 m
265
-
-
(iv) For depth greater than 4.5 m upto 6.0 m
265
-
-
(v) For depth greater than 6.0 m upto 7.5 m
265
-
-
(vi) For depth greater than 7.5 m upto 9.0 m
120
-
-
Construction of chambers on both side of pushing work built in RCC M30 with Ordinary Portland Cement with TMT Fe-500 reinforcement, PCC 150 mm thick in M 15, RCC M30 for wall, base slab and top slab, including formwork etc. complete. Concrete work should be fair finish.
PCC (M-15)
30
-
-
RCC (M-30)
i) Top Slab
60
-
-
ii) Bottom Slab
75
-
-
iii) Wall
275
-
-
Reinforcement TMT Fe-500D
51
-
-
Providing and applying 15 mm thick cement plaster in single coat on concrete work for interior plastering to RCC chambers finished even and smooth in Cement mortar 1:3 (1 cement : 3 sand) including racking out joint curing, scaffolding required if any, with necessary cement finishing etc. complete as directed.
810
-
-
Providing and laying cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including finishing with a floating of neat cement etc. complete laid in one layer finished including necessary curing and with ordinary portland cement, 40 mm thick to RCC chambers.
240
-
-
Providing, Supplying & Fixing FRC Manhole seat & cover as per IS 12592:2002 etc. complete.
'Heavy Duty Frame & cover suitable for 560 mm dia. Clear opening of MH
10
-
-
Providing and fixing water tight construction or expansion joints 150 mm. dia. Wide thin ribbed PVC etc. complete.
145
-
-
Extra rate over item of excavation of earth for excavation of asphalt pavement/RCC of thickness upto 0.3 mt. ( By any kind of breaker machine) including cost of operator , fuel & transportation etc. complete.
180
-
-
Designing, Manufacturing MS pipe as well as MS specials in accordance of IS:5822-1994 or its latest edition in suitable lengths from MS plates (plates shall be as per IS : 2062-1992 or its latest edition of Grade 'B'-Fe 410), as per IS : 3589-1991 or its latest edition including cutting, bending of plates to the required shapes, welding by Metal arc Welding, having joints with bevelled ends including ultrasonic and Radiographic at random including inside & outside zinc epoxy paint in two coats including hydraulic testing and tolerances for outside diameter of pipe shell. Circularity test as per IS : 3589-1991 and all other required tests, carting to the site of coating and unloading, stacking, etc. including all taxes, duties, local taxes etc. complete, as required.
'3000 mm finished Inside Diameter (FID) 32 mm thick MS Plate thickness. (for Pushing work)
95
-
-
Providing, supplying, lowering, laying & jointing lSI mark R.C.C. pipes with Sulphate Resisting Cement in casing pipe in standard lengths of following class and diameter suitable Socket and Spigot joints including EPDM Rubber Ring as per IS 5382-1985 including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to site stacking etc. complete. (IS - 458/ 2021)
Note : One rubber ring should be supplied with each full length socketed pipe, cost included in rates below.
RCC NP4 Pipe (with SRC Cement) - Carrier pipe for pushing work
2000 mm dia.
60
-
-
2200 mm dia.
95
-
-
Refilling the pipeline trenches including ramming, watering, consolidating desposal of surplus stuff as directed within a radius of 3 km.
615
-
-
Providing and fixing plastic moulded reinforced steps with 10 mm TOR steel bar with plastic polyproclene (P.P.) material (vergin) etc complete.
165
-
-
Construction of Sewage Pumping Station (2 nos. at Shela, 1 no. of SPS in Sanathal -Telav, ISPS at Sanathal-Navapura, with Compound wall including Internal road, main gate (Civil Work)
Excavation for foundation for all sorts of soil & murrum including sorting out and stacking of useful materials and disposing of the excavated stuff up to 50 meter lead. (i) For depth upto 1.5 m.
5995
-
-
(ii) For depth greater than 1.5 m upto 3.0 m
5155
-
-
(iii) For depth greater than 3.0 m upto 5.0 m
6425
-
-
(iv) For depth greater than 5.0 m upto 6.0 m
3035
-
-
(v) For depth greater than 6.0 m upto 7.0 m
2890
-
-
(vi) For depth greater than 7.0 m upto 8.0 m
2690
-
-
(vii) For depth greater than 8.0 m upto 9.0 m
2450
-
-
(viii) For depth greater than 9.0 m upto 10.0 m
1855
-
-
(ix) For depth greater than 10.0 m upto 11.0 m
1645
-
-
(x) For depth greater than 11.0 m upto 12.0 m
1520
-
-
(xi) For depth greater than 12.0 m upto 13.0 m
1120
-
-
(xii) For depth greater than 13.0 m upto 14.0 m
395
-
-
(xiii) For depth greater than 14.0 m upto 15.0 m
300
-
-
'Filling with available excavated earth (excluding rock) in trenches, plinth, sides of foundation in layers not exceeding 20 cm in depth consolidating each deposited layer by ramming and watering.
19805
-
-
Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete.
270
-
-
Filling in foundation and plinth with murrum or selected soil in layers of 20cm.thickness including watering, ramming and consolidating etc complete.
145
-
-
Providing and laying ordinary cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and curing etc. complete (with form work) For Foundation and in plinth below flooring.
765
-
-
Providing and laying cement concrete M15( 1:2:4) (1 cement : 2 coarse sand : 4 hand broken stone aggregate 20 mm nominal size) and curing etc. complete (Excluding cost of form work) For Foundation and in plinth.
110
-
-
Providing and laying controlled cement concrete M-30 'with sulphate resistant cement for water retaining structures with vibrating, curing etc. complete including the cost of form work but excluding the cost of reinforcement for RCC work stated below etc. 'complete at any height depth as directed.
R.C.C. slab and footings
3570
-
-
R.C.C. walls and baffle wall
5805
-
-
R.C.C. staircase in wet well
25
-
-
R.C.C Beams
205
-
-
Platform
25
-
-
Fillet
25
-
-
RCC Column
100
-
-
R.C.C. Pedestal
25
-
-
R.C.C. Top slab
190
-
-
Providing and laying controlled cement concrete in M-30 grade concrete in Ordinary Portland Cement with vibrating, curing etc. complete including the cost of form work but excluding the cost of reinforcement for RCC work stated below etc. 'complete at any height as directed. (For Retaining wall type compound wall of sewage pumping stations)
RCC Column
40
-
-
RCC Coping
25
-
-
RCC Slab & Footing
20
-
-
Providing and laying controlled cement concrete M25 for superstructure (above plinth level) in ordinary portland cement with vibrating, curing etc. complete including the cost of form work but excluding the cost of reinforcement for RCC work stated below etc. complete at any height, 'as directed. (For super strucutre of sewage pumping stations & compound wall of sewage pumping stations)
R.C.C. beams, lintels and bracket for gantry or chain pully blocks, plinth beams, tie beams.
350
-
-
R.C.C. slabs and platform
310
-
-
R.C.C. weather shed, pardi & staircase
35
-
-
R.C.C. columns
160
-
-
R.C.C. footing
110
-
-
R.C.C. walls
35
-
-
R.C.C. coping
10
-
-
Providing and laying cement concrete 1:1.5:3 (1 cement :1.52- Coarse Sand: 3-graded stone aggregates 20 mm nominal size) & curing complete including cost of formwork excluding cost of reinforcement for RCC work in Foundation & Plinth. (upto 10 ton)
25
-
-
Providing TMT Bar Fe-500 reinforcement bars for R. C. C. work including bending, binding and placing in position complete upto floor two level.
1216
-
-
Providing and fixing water tight construction or expansion joints 150 mm. dia. Wide thin ribbed PVC etc. complete.
4995
-
-
Half brick masonary in common burnt clay building bricks having crushing strength not less than 35 Kg./sq.cm. in cement mortar (1:4) in super structure.
25
-
-
Brick masonry in cement mortar (1:5) using common burnt clay building bricks having crushing strength not less than 35kg/cm2 including scaffolding,curing, etc. complete for walls, parapets, etc. at all levels.
495
-
-
Brick work using common burnt clay building bricks having crushing strength not less than 35kg / Sq. C. M. in ramp, steps and Foundation & Plinth in cement morter1:5 (1 cement : 5 coarse sand) including racking out joints, curing, scaffolding required if any etc. complete, as directed.
10
-
-
Brick work using common burnt clay building bricks having crushing strength not less than 35 kg / Sq. Cm. in foundation and plinth in cement mortar 1:6. (1 cement : 6 coarse sand)
35
-
-
Brick work using common burnt clay building bricks having crushing strength not less than 35 kg/cm2 in superstructure and parapet in cement mortar 1:6. (1 cement : 6 coarse sand)
380
-
-
Providing and applying with two coats 20 mm thick inside cement plaster with Ordinary Portland cement and water proofing agent on inside of inlet chamber, screen chamber, wet well, consisting of 12 mm thick backing coat of C. M. 1:3 (1 cement : 3 sand) and 8 mm thick finishing coat of C. M. 1:1 (1 cement: 1 sand) etc. complete including necessary curing, scaffolding required if any etc. complete.
7460
-
-
Providing and applying 20 mm thick sand faced cement plaster at outside RCC / brick on work upto height 10 mtr. above ground level consisting of 12 mm thick backing coat of C. M. 1:3 (1 cement : 3 sand) and 8 mm thick finishing coat of C. M. 1:1 (1 cement : 1 sand) etc. complete.
5150
-
-
Providing and applying 15 mm thick cement plaster in single coat on brick / concrete work for interior plastering upto floor two level finished even and smooth in Cement mortar 1 : 3 (1 cement : 3 sand) etc. complete as directed
5810
-
-
Providing and applying 10 mm thick cement plaster in single coat on concrete work for interior plastering upto floor two level on ceiling finished even and smooth in Cement mortar 1 : 3 (1 cement : 3 sand) etc. complete as directed.
1090
-
-
Providing and laying 40 mm thick cement concrete flooring in 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including water proofing compound finishing with a floating of neat cement etc. complete laid in one layer finished including necessary curing with sulphate resistant cement in bottom of Inlet, Screen Chamber, Wet Well etc.
1420
-
-
Providing and laying polished Kota stone slab 25 mm thick in riser of steps, dado & pillars, skirting, laid on 10 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry including rubbing and polishing etc. complete in H.T., L.T. room etc.
80
-
-
Providing and laying polished Kota stone slab flooring over 20 mm (average) thick base of cement mortar 1:6 (1 cement : 6 coarse sand) laid over and jointed with grey cement slurry including rubbing and polishing etc. complete 25 mm thick in H.T., L.T. Room etc. of sewage pumping stations.
540
-
-
Providing and Laying white glazed tiles 6 mm thick in flooring treads of steps and lading laid on a bed of 12 mm thick cement mortar 1:3 (1-cement :3 coarse sand)finishing with flush pointting in white cement in toilet block.
25
-
-
Providing and laying 40 mm thick heavy duty cement concrete flooring in 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) with ironite powder including finishing with a floating of neat cement etc. complete at plinth level of wet well / pumphouse.
40 mm thick
615
-
-
Providing and laying cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including finishing with a floating of neat cement etc. complete laid in one layer finished including necessary curing and with water proofing compound with ordinary Portland cement. 40 mm thick.
1420
-
-
Providing and laying chequered precast cement concrete tiles 22 mm thick with aggregate of sizes upto 6 mm. laid in floors, trade of steps and landing on a bed of 20 mm thick C.M. 1:6 joint with neat cement slurry with pigment to match the shade of tiles complete.
600
-
-
Distempering in 3 coats with oil bound distemper of approved brand and manufacture and of required shade on wall surface to give an even shade over and including a primer coat with distemper primer of approved brand, thoroughly brushing the surface free from mortar dropping and other foreign material and also inclusive of preparing the surface even and smooth etc. complete.
4220
-
-
Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture of undercoated wall surface to give an even shade including thoroughly brushing the surface free from mortar dropings and other foreign matter and sand papered smooth.
2955
-
-
Providing and applying Epoxy paint of approved make to concrete surface for RCC structure including cleaning the surface by scrapping and air blowers to the satisfaction of Engineer-in-charge necessary scaffolding etc. complete with all leads and lifts and giving satisfactory hydraulic test for water tightness as per IS codes.tightness as per IS codes.
For new surface- Two coats
7460
-
-
Providing & fixing in position aluminum fully paneled doors with 15 micron natural matt brush finish anodized as per over all size shown on the drawings and aluminum sections of approved make conforming to IS:733 and IS : 1285, made out of 102 mm x 45 mm x 1.90 mm thick aluminum outer frame section weighing 1.640Kg/m. and shutter sections with bottom / lock rail 96 mm x 45 mm x 2.7 mm, top rail 48 mm x 45 mm x 2.70 mm weighing 1.38 Kg/m. vertical styles 48 mm x 45 mm x 1.90 mm weighing 0.976 Kg/m. with rounded sides, fixed with roll plugs and screws or with fixing clips, or with expansion hold esters including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. and aluminum snap beading for glazing / paneling, C. P. brass/stainless steel screws, including standard anodized aluminum fittings and fixtures of approved make and of adequate size and in adequate numbers, double action floor springs of approved make for each shutter with standard pivot panels of 12 mm thick pre-laminated three layer medium density, exterior grade particle board (termite proof, water proof and fire proof)Grade 1, Type II conforming to IS : 12823 bounded with phenol formaldehyde synthetic resin, of approved make including cost and fixing of fixtures etc. complete as per detailed drawings with all lead and lifts.
55
-
-
Providing and fixing window having extruded aluminum Colour anodized section frame main outer size 95mm x 24mm x 1.17 mm (of Jindal Section no : 2459 @ wt. of 0.738 Kg/mt), horizontal Three track member size 92mm x 31.75 mm x 1.30 mm (of Jindal Section no. 8688, @ Wt. 1.07 Kg/mt), vertical member of size 92mm x 31.75mm x 1.50 mm (of Jindal Section no. 8933, @ Wt. 1.06 Kg/mt.) with sliding shutters of horizontal member size 40mm x 18mm x .29 mm (of Jindal section no. 8947 @ wt. 0.456 Kg/mt.) vertical member of size 40mm x 18mm x 1.29mm (of Jindal Section no. 8949 @ wt. of 0.456 Kg/mt with 5 mm thick transparent bronze colour tinted float glass with powder coated aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame as per details etc.
125
-
-
Providing and fixing standard extruded of alluminimum section of size 63mm x 38.10mm x 1.2mm (Jindal Section : 2434, @ Wt. 0.643 Kg/mt.) with colour powder coated alluminium frame for ventilation with 5 mm thick frosted glass as details etc complete for Ventilation.
15
-
-
Providing & fixing in position aluminium grill with 15 micron natural matt brush finish anodised as per over all size shown on the drawings and aluminium sections of approved make conforming to IS:733 and IS : 1285, made out of DG - 104 design ( Jindal or equivalent ) fixed with required size F channel, rawl plugs and screws or with fixing clips, or with expansion hold esters including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. and aluminium snap beading for glazing / panelling, C. P.brass/stainless steel screws, including standard anodised aluminium fittings and fixtures of approved make and of adequate size and in adequate numbers, including cost and fixing of fixtures etc. complete as per detailed drawings with all lead and lifts.
140
-
-
Providing and fixing rolling shutter of approved make made of 80 mm. wide M.S. laths inter lock together their entire length and jointed together at the end locks mounted on specially designed pipe shaft with bracket plates, guide channels and outside locking with push- pull operation including the cost of hood cover and spring etc. complete. Shutters having width below 3.5 m.
50
-
-
Providing and fixing 50 em wide M.S. Ladder fabricated from M.S. Flats 10 mm x 75 mm with 20 mm dia steel bar steps in double rows, @ 30 em C/C. The include stays of 10 mm x 50 mm flats fixed at 3 meter C/C wtih welding anchoring and 3 coats anticorrosive paint. (M.S. ladder (without safty cage)
110
-
-
Providing and fixing 40mm dia. GI pipe medium weight (3.17 kg/rmt approx ) quality as railing with angle iron support at 1.5 m c/c using 75 x 75 x 10 mm angles, 1.15 m long with three rows of pipes as railing including necessary painting with two coats of approved quality oil paint over one coat of approved primer including necessary welding, bolting required, if any.
270
-
-
Providing and fixing MS grating with 8 mm thick 50 mm wide flat at 50 mm c/c to form grid pattern as specified and wherever directed including two coats of approved quality oil paint with one coat of primer red oxide etc. complete.
75
-
-
Supplying, cleaning, cutting, bending, welding, fabricating, erecting structural steel in position irrespective of locations and levels as per drawing including handling and transport etc. complete including applying two coats of primer red oxide and two coats of approved quality of paint over it etc. complete as directed for gentry girder, platform, stairs, chequered plate for cable trench etc.
38825
-
-
Providing and fixing plastic moulded reinforced steps with 10 mm TOR steel bar with plastic polyproclene (P.P.) material (vergin) etc. complete.
800
-
-
Providing and fixing to wall, ceiling and floor 10.0 kg.F/cm2 working pressure polythene pipes of the following outside Dia. Low density complete with special flange compression type fittings, wall clips etc. including making good the wall ceiling and floor.
110 mm dia.
125
-
-
Grouting with 1:3 cement mortar for anchor bolt pockets machine bases, pipe sleeves, pocket holes etc. including roughening and cleaning of concrete surfaces curing etc. complete.
15
-
-
Providing, Cement vata (10cm. X 10. cm. size) quarter round in cement motar 1:1 including neat cement finishing, watering etc. complete.
495
-
-
Providing 100 mm x 100 mm size vata in cement concrete (1:2:4) including water proofing compounds, smooth finish, curing, etc. complete for the internal side of the sump, pump house and chlorination room.
700
-
-
Supplying & fixing insert plate of size 150 x 150 x 6 mm in wall alongwith ISA 100 x 100 x 8 mm angle in position for support of vertical delivery pipe, as per drawing including handling and transporting etc. complete.
125
-
-
Providing and laying brick bat coba on terrace including 'necessary watering , ramming, etc.complete.
255
-
-
Providing and fixing in position PVC vent pipes of 160 mm dia 3 m length.
80
-
-
Providing and supplying in standard length lSI mark rigid unplasticised PVC pipes suitable for potable water wtih ring fit joint including cost of rings, as per IS specification no. 4985!1988 including all local and central taxes, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to the departmental stores and Including cost of jointing material etc. complete.
Test Pressure 4 kg/ cm2
110 mm dia.
525
-
-
Providing and laying white glazed tiles 6 mm thick in flooring, treads of steps and landing laid on a bed of 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) finishing with flush pointing in white cement. (Upto 10 ton)
15
-
-
Providing and laying white glazed tiles 6 mm thick in skerting risers of steps and dedo on 10 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) and jointed with white cement slurry. (upto 10 ton)
30
-
-
Providing and fixing water closet squatting pan (Indian type W.C. pan) size 580 mm x 450 mm white colour vitreous china long pattern type conforming to IS : 2556 (Part III) together with 100 mm size vitreous China 'S' trap as per IS : 2556 (Part XIII) both of an approved make including jointing the trap with the pan and soil pipe in C. M. 1:1 (1 cement : 1 sand) with 32 dia. C. P. brass half turn flush cock complete including earthwork, bed concrete of 1:4:8.
5
-
-
Providing and fixing flat back white colour vitreous china wash basin 550 mm x 400 mm size with CI brackets painted white. Wash basin shall have 15 mm dia GI supply pipe, overflow chase, 15 mm dia pillar cock and stop cock with PVC bottle trap and PVC pipe piece upto wall plus 32 mm dia PVC waste pipe upto floor level connected to 32 mm dia CI pipe below floor and connected to nearby floor trap complete with unions and plumber's white soldered joints with necessary cleaning eye, complete. All chases cut in wall for fixing pipes shall be made good in CM (1:4).
5
-
-
Providing, laying and jointing in true line and level U.P.V.C. Pipe (SCH-40) including fittings. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.
15 mm dia.
300
-
-
25 mm dia.
75
-
-
Providing & fixing gun metal check or non return full way wheel valve.
15 mm dia.
10
-
-
Providing and fixing brass screw down stop tap. (A) 15mm dia.
5
-
-
Providing and fixing screw down bib taps of following size.(C)Gun metal screw down bib tap. i) 15mm dia.
10
-
-
Providing and fixing 150 mm x 100 mm intercepting sewer trap embedded in concrete complete including excavation and backfilling.
5
-
-
Constructing machinehole with R.C.C. top slab in 1:2:4 mix (1-cement: 2-coarses and :4- graded stone aggregate 20 mm nominal size) foundation concrete 1:3:6 mix (1-cement : 3-coarse sand : 6-Brick bats 40+50 mm size) inside plastering 15 mm thick with Cement Mortar 1:5 (1-Cement : 5-coarse sand)finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix (1-Cement: 2-Coarses and : 4-stone aggregate 20 mm nominal size) finished smooth complete including curing and festing (i) Inside size 900mm x 1200 mm and 2.0 M. deep including C.I. cover with frame size 560mm diameter total weight of cover and frame to be not less than 128kgs. (Wt. of cover 64Kg. and Wt. of frame 64Kg.) (A) With 230 mm thick walls of brick msonry using brick having crushing strength not less than 35Kg./Sq.cm. in Cement Mortar 1:5 (1-Cement : 5-Coarse sand) (1) A type depth 0.90 Metre for 150 mm diameter sewer.
5
-
-
Constructing brick masonry chamber for under ground C.I. Inspection chamber and bends with bricks having crushing strength not less than 35Kg./Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm internal dimensions total weight of cover with frame to be not less than 38Kg. (Wt. of cover 23Kg.) and Wt. of frame 15Kg.) (R.C.C. top slab e with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete. (ii) Inside dimensions 500mmx700mm and 450mm deep for pipe line with one or two inlets. (upto 10 ton)
5
-
-
Providing and fixing cast iron (Spun) Nahni trap of the following nominal diameter of self cleaning design with C.I. screaed down or hinged grating including cost of cutting and making good the walls and floor 100mm inlet and 50mm outlet. (C) 100mm dia.
5
-
-
Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and water tight C. I. cover with frame of 300 mm x 300 mm size (inside) with standard weight. (i) Square mouth traps.(B) 150mm x 100mm size P or R type.
10
-
-
Providing and fixing100mm size P or Strap for water closet squatting pan including jointing the trap with the pan and soil pipe in cement Mortar1:1 (1-Cement : 1-Fine sand) (A) Vitreous China.
5
-
-
Providing and laying (tolevelorslopes) and jointing with stiff mixture of Cement Mortar in proportion 1:1 Selt glazed stone ware pipes including testing of pipes and joints complete.(B)150mm dia.
75
-
-
Providing erecting and fixing double coated syntex PVC (ISI) water tank of required capacity each with all necessary fittings and connection etc. complete on terrace. (5000 litre each at 3 loacations)
15000
-
-
Providing, Supplying and fixing ISI mark G.I pipes with coupling of following class and diameter including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to departmental stores, stacking etc. complete. (IS:1239) Medium Duty.
15 mm dia GI pipe sleeves
15
-
-
25 mm dia GI pipe sleeves
15
-
-
50 mm dia GI pipe sleeves
15
-
-
Dewatering by pumping set of required capacity including temporary platform carting pumping at site and fixing the same in position including all accessories, and fuel and labour etc. complete.
1576800
-
-
Labour charges for writing of capital letter in green plaster of 30 cm height, 25 mm thick and 12 mm embossed as per given detail in outside of compound wall as instructed by Engineer in charge.
215
-
-
Providing in line level plumb, fabricating and fixing three row horizontal barbed wire fencing and punched tape concertina coil of 9 turns per meter of 610 mm diameter fixied with clips on top of the angle iron posts. The punched tape concertina coil having sharp barbs at every 25 mm spacing shall be 0.5 mm thick and 19 mm width and weighting 13 Kg./100 mtr. (Average) as per manufacture's specification. The rate shall also include providing and fixed 1.20 mt. total long MS angle 40 x 40 x 6 mm @ 3.00 mt. c/c spacing embedded in RCC column, angle posts shall be painted with one coats of red oxide and two coats of enamel paint of approved quality at top of compound wall.
635
-
-
Fabricating and fixing in position MS structural section such as flat, pipes, plates, hold fast, anchoring bolts / bars of required size including fixing, welding and two coats of approved anti corrosive paint over prime coat of red-oxide including RCC gate column as per drawing etc. complete as directed by Engineer-in-charge.
a) 2.2 m height and 6 m wide main and wicket gate
2600
-
-
Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an required shape even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials. Etc. Complete.
1405
-
-
Construction of 200mm thick un-reinforced, dowel jointed, plain cement concrete pavement with M-35 grade of concrete including Provision of contraction, expansion, construction and longitudinal joints, joint filler,, sealant primer, joint sealant,, dowel bar,Tie rod, admixtures as approved, finishing to line sand grades as per drawing as per MoRTH clause 602 over a 100mm thick DLC in M10 with necessary excavation / loosening and re-compacting ground as per detail and specification.
1305
-
-
Earthwork in embankment including breaking clods, dressing with all lead and lift including rolling of earthwork in layers including filling in depression, including water of earth as directed. (from borrow area within 3 km lead).
5275
-
-
Empty boring through all sorts of strata for providing 0.35m diameter R.C.C bored piles to required depth including providing necessary casing pipe with all plants and equipments as required complete. 350 mm (for compound wall of sewage pumping station)
885
-
-
Empty boring through all sorts of strata for providing 0.45 mt diameter R.C.C. bored piles to required depth including providing necessary casing pipe with all plants and equipments as required complete. (for compound wall at sewage pumping station)
720
-
-
Providing & laying controlled cement concrete M 300 for R.C.C. bored piles of 0.35 / 0.45 m dia. including ramming, vibrating, curing and finishing complete.
220
-
-
Providing & casting in-situ controlled cement 'concrete M 300 for R.C.C. pile cap including necessary formwork, vibrating, curing and finishing 'complete.
170
-
-
Distempering in 2 coats with oil bound distemper of approved brand and manufacture and of required shade on wall surface to give an even shade over and including a primer coat with distemper primer of approved brand, thoroughly brushing the surface free from mortar dropping and other foreign material and also inclusive of preparing the surface even and smooth etc. complete, as directed. (For compound wall)
2380
-
-
Providing and fixing PVC pipe of 6Kg./cm2 of 140 mm dia for rain water with shoe.
75
-
-
Providing and laying broken China Mosaic flooring for terrace using 12 mm to 20 mm broken pieces of glazed tiles to be laid over Cement mortar 1:3 to plain or slope and to be tempered to bring mortar crème out upto surface using white cement including rounding of junctions and extending them upto 15 cm. along the wall, clearing with water and oxalic acid etc. as directed.
240
-
-
Rising Main (Shela SPS-01 to Exist. TM, Shela SPS-02 to Exist. TM,Sanathal SPS to Proposed TM on 36 mt. Road, ISPS to Inlet Chamber of Proposed STP ( With Pushing Work)
Excavation for pipeline trenches with shoring & strutting if required as per required gradient and line including all safety provision using site rails and stacking excavated stuff including up to all required lead cleaning the site etc. complete for all lift and strata as specified. In all sorts of Soil and murrum.
(i) For depth upto 1.5 m.
36340
-
-
(ii) For depth greater than 1.5 m upto 3.0 m
10580
-
-
Providing and supplying DI K-9 grade pipe with EPDM gasket for following nominal bore diameter with internal cement mortar lining including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to site, stacking etc. complete. (IS 8329-2000).
300 mm dia
1550
-
-
600 mm dia
3200
-
-
Lowering, laying and jointing DI Pipes of various classes with specials of following diameters in propoer position grade and alignment as directed by Engineer in charge. 300 mm dia
1550
-
-
600 mm dia.
3200
-
-
Designing, Manufacturing, Lowering, Laying and Jointing MS pipe as well as MS specials in accordance of IS:5822-1994 or its latest edition in suitable lengths from MS plates (plates shall be as per IS : 2062-1992 or its latest editin of Grade 'B'-Fe 410), as per IS : 3589-1991 or its latest edition including cutting, bending of plates to the required shapes,welding by Submerged Arc Welding, having joints with bevelled ends including ultrasonic and Radiographic at random including inside zinc epoxy paint in two coats and 40 mm thick guniting on outside in CM (1:3) under pressure with reinforcement as per IS 1566 including mixing,curing etc. and hydraulic testing and tolerances for outside diameter of pipe shell. Circularity test as per IS : 3589-1991 and all other required tests, carting to the site of coating and unloading, stacking, etc. including all taxes, duties, local taxes etc. complete, as required.
'1422 mm Outside diameter with 12.5 mm thick MS plate
3750
-
-
Supply, fabrication, transporting, including all taxes, insurance etc. aligning & fixing in position flange ends and mild steel specials and fixtures including in lining and out coating in accordance with IS : 5822-1994 or its latest edition from MS plates or coils (plate shall be as per IS : 2062 as per its latest eidtion of Grade-B Fe-410 & coil shall be as per IS : 10748 as per its latest edition). Pipe manufactured shall be as per IS : 3589-2001 or its latest edition including cutting, bending, drilling holes and complete welding. The rate also includes supply of rubber packing, bolts, nuts etc. wherever required including Radiographic testing or Ultrasonic testing in factory (15% of welded length of each joint) as per IS- 3589-2001.
M.S. specials flanged ends
Above 300 mm dia.
45445
-
-
D.I. Specials - Manufacture, Supply,Delivery of Ductile Iron flanged Socket Spigot Bends, tees,reducers or any other specials as per BS-EN-545/1995 Class-A series K12 suitable for use with D.I Pipes manufactured as per IS:8329/1994 delivery of specials to site of works any where in Gujarat including fixing, all taxes, loading, unloading, carting, stacking,insurance, inspection charges, octroi etc. complete.
Socket & Spigot Type
80 to 300 mm dia.
1815
-
-
350 & above
10005
-
-
Providing,supplying ,fixing ISI mark Ductile Iron D/F manually gear operated SLUICE VALVE including taxes, insurance, transportation, fright charges, Octroi Inspection, charges, loading , unloading, conveyance to site stacking, etc. complete. valve with ISI mark only.
PN 1.0 with hand wheel /cap operated (PD Type Short body)
300 mm dia
5
-
-
600 mm dia
5
-
-
1000 mm dia
5
-
-
Providing and supplying CI/DI Tamper proof /Bi Stream Air valves with SS 304 Float gun metal nozzle of approved make & quality of following class and diameter including all taxes,insurance, transportation, freight charges, octroi,inspection charges, loading, unloading, conveyance to the departmental stores, stacking etc. complete.
With Isolating Sluice Valve PN 1.0
80 mm dia.
5
-
-
150 mm dia.
10
-
-
200 mm dia.
10
-
-
Lowering, laying & jointing in position following air Valves including cost of all labour, jointing material, including cost of all labour,jointing material including nut bolts & giving satisfactory hydraulic testing, etc. complete. 80 mm dia.
5
-
-
150 mm dia.
10
-
-
200 mm dia.
10
-
-
Providing and laying cement concrete M15( 1:2:4) (1 cement : 2 coarse sand : 4 hand broken stone aggregate 20 mm nominal size) and curing etc. complete (Excluding cost of form work) For Foundation and in plinth.
15
-
-
Providing and laying controlled cement concrete M20 (1:1.5:3) for thrust block & encasing including formwork but excluding the cost of reinforcement with curing etc. complete, as directed.
915
-
-
Providing TMT Bar Fe-500 bar reinforcement for R.C.C work including bending, binding and placing in position complete up to floor two level.
5
-
-
Extra rate over item of excavation of earth for excavation of asphalt pavement/RCC of thickness upto 0.3 mt. ( By any kind of breaker machine) including cost of operator , fuel & transportation etc. complete.
6265
-
-
Reinstatement of Bituminous road including with 37.5 mm thick BUSG with Asphalt VG 30 @ 15 kg/10 Sqm for grouting and 5 kg /10 Sqm for tack coat on base course with BT aggregate,200 mm thick WMM ,100 mm thick WBM with 22.4 to 53 mm aggregate,100 mm thick WBM with 45 mm to 63 mm aggregate,200 mm thick GSB I with necessary excavation/loosening and recompacting ground as per respective MoRTH specification and as directed by engineer in charge.
6265
-
-
Refilling the pipeline trenches including ramming, watering, consolidating desposal of surplus stuff as directed within a radius of 3 km.
39820
-
-
Construction of chambers in RCC M30 with SRC cement with TMT Fe-500 reinforcement,PCC150 mm thick in M 15,15 mm thick inside cement plaster with SRC Cement in C.M.1:3 and depth of chamber from G.L. to pipe invert level including complete civil works and inclusive of the cost of excavation, refilling and PVC foot steps including providing RCC Slab in one single piece with fixing of FRC (heavy duty) machinehole frame and cover. Excavation
(i) For depth upto 1.5 m.
440
-
-
(ii) For depth greater than 1.5 m upto 3.0 m
375
-
-
(iii) For depth greater than 3.0 m upto 4.5 m
10
-
-
PCC M-15
35
-
-
RCC M-30
RCC Wall
85
-
-
RC.C. Top Slab
25
-
-
RC.C. Base Slab
35
-
-
TMT Fe-500 Reinforcement
18
-
-
15 mm thick Inside Cement Plaster in CM 1 : 3
440
-
-
RCC Precast MH Frame & Cover
25
-
-
Refilling
485
-
-
PVC steps
195
-
-
Making connection to the ex.M.H.in running sewer includingDewatering and other required machinery etc. of following dia pipes at any convenient time. All damaged work shall be well repaired as per instructions. etc..complete. 150 mm to 300 mm dia.
5
-
-
400 mm to 600 mm dia.
5
-
-
Drilling /Pushing of 1300mm dia Horizontal borehole for Carrier pipeline under Canal incl all strata with required lengthincluding fixing of 1200mm dia M.S.casing pipe with pushing etc complete Providing & fixing size of pipe for 600 mm dia carrier pipe under supervision of authorityincluding Provinding, supplying & fixing of spacer at specified interval if required between Casing pipe and carrier pipe,ISI make sluice valve of required size at both side with construction of brickedge pavementincludingC:C encasing 1:3:6 in 10mtr length of pipe at both side.includingProvindlng & fixing Valve chamber with frame & cover for chamber with loacking arregment etc. complete with all material labour fabrication,hydraulic testing of pipe & valve etc complete With MS Casing Pipe+ Carrier Pipe 600 mm DI Pipe (For crossing Canal)
85
-
-
Pushing Work
Laying 2.2 mt. dia. RCC NP-4 Pipe (by Pushing method) of required length including open excavation for thrust bed necessary formwork, concreting curing, vibrating, pushing etc. complete as per contractor's own design approved by competent authority based on approved GAD by competent authority. (National Highway)
The item includes
a) Providing and laying M-25 grade for cast in situ thrust bed and thrust wall with necessary excavation with shoring and strutting, formwork, curing, vibrating as per contractor's own design approved by competent authority.
b) Providing and fixing TMT-Fe-500 bars for thrust bed and thrust wall including supplying, cleaning, cutting, bending and placing in position, lapping, binding with 16 SWG soft iron wire irrespective of locations and levels.
c) Providing front shield, intermediate shield, jointing, jacking rigs, sliding channels spacers etc. All the structural steel used except intermediate shields will be ownership of contractor after pushing work is completed. d) Pushing with hydraulic jack without disturbance to pavement including all necessary excavation for thrust bed and thrust wall, necessary shoring and strutting required, necessary dewatering required if any, excavation within the box with all necessary refilling upto ground level after pushing work completed including carting of extra earth upto a lead of 5 Kms. This also includes necessary labour cost for pushing and including necessary cost of hydraulic pipe and oil for hydraulic jacks including necessary depreciation cost of jack. e) Applying 2 coats of approved quality epoxy painting on top and sides of precast units after casting work completed including necessary groutings with cement between two precast units after pushing work is completed.
60
-
-
Laying 2.2 mt. dia. RCC NP-4 Pipe (by Pushing method) of required length including open excavation for thrust bed necessary formwork, concreting curing, vibrating, pushing etc. complete as per contractor's own design approved by competent authority based on approved GAD by competent authority. (Ahmedabad-Dholera Express way)
The item includes
a) Providing and laying M-25 grade for cast in situ thrust bed and thrust wall with necessary excavation with shoring and strutting, formwork, curing, vibrating as per contractor's own design approved by competent authority.
b) Providing and fixing TMT-Fe-500 bars for thrust bed and thrust wall including supplying, cleaning, cutting, bending and placing in position, lapping, binding with 16 SWG soft iron wire irrespective of locations and levels.
c) Providing front shield, intermediate shield, jointing, jacking rigs, sliding channels spacers etc. All the structural steel used except intermediate shields will be ownership of contractor after pushing work is completed. d) Pushing with hydraulic jack without disturbance to pavement including all necessary excavation for thrust bed and thrust wall, necessary shoring and strutting required, necessary dewatering required if any, excavation within the box with all necessary refilling upto ground level after pushing work completed including carting of extra earth upto a lead of 5 Kms. This also includes necessary labour cost for pushing and including necessary cost of hydraulic pipe and oil for hydraulic jacks including necessary depreciation cost of jack. e) Applying 2 coats of approved quality epoxy painting on top and sides of precast units after casting work completed including necessary groutings with cement between two precast units after pushing work is completed.
150
-
-
Laying 2.2 mt. dia. RCC NP-4 Pipe (by Pushing method) of required length including open excavation for thrust bed necessary formwork, concreting curing, vibrating, pushing etc. complete as per contractor's own design approved by competent authority based on approved GAD by competent authority. (IOCL Line)
The item includes
a) Providing and laying M-25 grade for cast in situ thrust bed and thrust wall with necessary excavation with shoring and strutting, formwork, curing, vibrating as per contractor's own design approved by competent authority.
b) Providing and fixing TMT-Fe-500 bars for thrust bed and thrust wall including supplying, cleaning, cutting, bending and placing in position, lapping, binding with 16 SWG soft iron wire irrespective of locations and levels.
c) Providing front shield, intermediate shield, jointing, jacking rigs, sliding channels spacers etc. All the structural steel used except intermediate shields will be ownership of contractor after pushing work is completed. d) Pushing with hydraulic jack without disturbance to pavement including all necessary excavation for thrust bed and thrust wall, necessary shoring and strutting required, necessary dewatering required if any, excavation within the box with all necessary refilling upto ground level after pushing work completed including carting of extra earth upto a lead of 5 Kms. This also includes necessary labour cost for pushing and including necessary cost of hydraulic pipe and oil for hydraulic jacks including necessary depreciation cost of jack. e) Applying 2 coats of approved quality epoxy painting on top and sides of precast units after casting work completed including necessary groutings with cement between two precast units after pushing work is completed.
25
-
-
Excavation for pipeline trenches with shoring & strutting if required as per required gradient and line including all safety provision using site rails and stacking excavated stuff including up to all required lead cleaning the site etc. complete for all lift and strata as specified. In all sorts of Soil and soft murrum.
(i) For depth upto 1.5 m.
170
-
-
(ii) For depth greater than 1.5 m upto 3.0 m
170
-
-
(iii) For depth greater than 3.0 m upto 4.5 m
170
-
-
(iv) For depth greater than 4.5 m upto 6.0 m
30
-
-
Construction of chambers built in RCC M30 with OPC cement with TMT Fe-500 reinforcement, PCC 150 mm thick in M 15, RCC M30 for wall, base slab and top 'slab, including formwork etc. complete. Concrete 'work should be fair finish.
PCC (M-15)
20
-
-
RCC (M-30)
i) Top Slab
30
-
-
ii) Bottom Slab
30
-
-
iii) Wall
85
-
-
Reinforcement TMT Fe-500
18
-
-
Providing and applying 15 mm thick cement plaster in single coat on brick / concrete work for interior plastering upto floor any level finished even and smooth in Cement mortar 1:3 (1 cement : 3 sand) including racking out joint curing, scaffolding required if any, with necessary cement finishing etc. complete as directed.
390
-
-
Providing and laying cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including finishing with a floating of neat cement etc. complete laid in one layer finished including necessary curing and with ordinary portland cement. 40 mm thick.
145
-
-
RCC precast M.H. Frame & Cover Manufacture, supply & Delivery at site of work precast RCC M.200 Frame & cover suitable to drainage M.H. and as per type design & Drawing including cost of reinforcement M.S. Angles or Flat, curing mold work etc.
Heavy Duty Frame & cover suitable for 560 mm opening of MH
10
-
-
Providing and fixing water tight construction or expansion joints 150 mm. dia. Wide thin ribbed PVC.
65
-
-
Extra rate over item of excavation of earth for excavation of asphalt pavement/RCC of thickness upto 0.3 mt. ( By any kind of breaker machine) including cost of operator , fuel & transportation etc. complete.
120
-
-
Providing and supplying lSI Standard R.C.C. pipes (OPC) in standard lengths of following class and diameter suitable Collar joints or rubber rings joints including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to departmental stores, stacking etc. complete. (IS - 458/ 2021)
'Note : One rubber ring should be supplied with each full length socketed pipe, cost included in rates below. 'RCC NP4 Pipe (with OPC Cement)
2200 mm dia.
235
-
-
Designing, Manufacturing, Lowering in pipe, Laying and Jointing MS pipe as well as MS specials in accordance of IS:5822-1994 or its latest edition in suitable lengths from MS plates (plates shall be as per IS : 2062-1992 or its latest editin of Grade 'B'-Fe 410), as per IS : 3589-1991 or its latest edition including cutting, bending of plates to the required shapes,welding by Submerged Arc Welding, having joints with bevelled ends including ultrasonic and Radiographic at random including inside zinc epoxy paint in two coats and 40 mm thick guniting on outside in CM (1:3) under pressure with reinforcement as per IS 1566 including mixing,curing etc. and hydraulic testing and tolerances for outside diameter of pipe shell. Circularity test as per IS : 3589-1991 and all other required tests, carting to the site of coating and unloading, stacking, etc. including all taxes, duties, local taxes etc. complete, as required.
'1422 mm Outside diameter with 12.5 mm thick MS plate
235
-
-
Refilling the pipeline trenches including ramming, watering, consolidating desposal of surplus stuff as directed within a radius of 3 km.
265
-
-
Providing and fixing plastic moulded reinforced steps with 10 mm TOR steel bar with plastic polyproclene (P.P.) material (vergin) etc complete.
100
-
-
Pipeline Bridge for laying 1400 mm dia Rising main on Nani Fatehwadi Canal at Ch. 4.30 Km., on dholka Branch Canal at Ch. 31.7555 Km. Nr. Dholka Expressway Down Stream, at Ch. 29.375 Km. Nr. NHRB Down Stream
Carry out complete alignment grid survey work by total station along bridge alignment including marking of center line of alignment, taking ground level details of existing structures, details of all machineholes, catch pits, pipe line, valves, light poles, trees, overhead electrical lines, BSNL section pillar / box, Torrent electrical boxes, PMT including number marked on them, road dividers, footpaths, etc. within 40 m from center line and providing, fixing necessary reference pillars, establishing bench mark, establishing foundation layout on ground, including submission longitudinal section, cross section and drawing report of survey work in three hard copies with soft copy in CD to Engineer-in-charge as directed.
5
-
-
Carryout soil investigation work including drilling 150 mm dia bore holes in all sorts of soil, ordinary rock and hard rock, up to maximum depth as mentioned, collection undisturbed samples and conduction standard penetration tests alternate at an interval of 1.5 to 2.0 m depth, conducting necessary laboratory tests for all type of classification and determination of soil parameters if required, including submission of report in three copies covering investigation data and recommendation for SBC and the pile capacity considering the design criteria, all per specification.
150
-
-
Demarkation of road alignment including marking out road line by providing and fixing wooden pegs or steel rod of required size at every 25 M to 50 M. including excavating trenches ion both sodes of 0.30 m. x 0.30M. including supplying of labours and all materials for every work etc. complete.
1
-
-
Dismantling of Structures (Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres)By Mechanical Means for items Prestressed / Reinforced cement concrete grade M-20 & above.
30
-
-
Providing, installation and maintain Temporary barricading with retro - reflective paint,firm,tapes (up to 3.0 Mt. height) as specified in the drawing & specification for the construction of bridge, along with necessary diversion arrangement for existing traffic movement in an unobstructed condition, shall be provided as directed by Engineer in charge.
90
-
-
Excavation for foundation in sand, gravel, clay soft soils and murrum etc. including shoring, strutting dewatering as necessary and disposing of the excavated stuff as directed.(A) Depth upto 3.0 M. and lead upto 100m for 10 Cum.
360
-
-
Providing and filling in foundation with ordinary Cement concrete M15 mix and providing necessary vertical pin headers including formwork, vibrating, ramming and curing complete.
30
-
-
Empty boring through all sorts of strata for providing R.C.C. bored piles to required depth including providing necessary casing pipe with all plants and equipments as required complete.
For 750 mm dia.
990
-
-
Providing and laying controlled cement concrete M35 for R.C.C. bored piles including ramming, vibrating, curing and finishing complete.
450
-
-
Carrying out High strain Dynamic Test on any working pile / Test pile as selected by the Engineer-in-charge. The test shall be carried out by agency approved by engineer in charge as per IRC-Notification 54 and submitting results / reports in three hard copies with soft copy in CD. Item includes all necessary arrangements required for the test. (with guided frame arrangement) as directed by engineer in charge.
5
-
-
Performing Integrity Test (low strain) on all vertical pile. The item shall include chipping of weak concrete at the top of pile, leveling, bending of reinforcing bars, preparation of pile head including testing with pile driving analyzer or approved equivalent. To be carried out at least 15 days after concreting of piles. A specialist approved Agency shall be employed by the Contractor for the test. The test shall be carried out as per relevant ASTM code. The item is including complete testing with approved apparatus, analysis of results and conclusions including submission of test reports in three hard copies with soft copy in CD. as directed by engineer in charge.
20
-
-
Supplying, fabricating and placing in position MS liner made of 6 mm thick MS plate for cast-in-situ concrete piles including all operation such as straightening, cutting, bending to shape, welding, fabricating, driving, placing in position, applying protective coating, etc. complete as per specification. Depth of liner shall be decided by Engineer-in-charge as per site condition.
30
-
-
Providing and casting in situ controlled cement concrete M30 for R.C.C. pile cap including necessary formwork, vibrating, curing and finishing complete.
180
-
-
Providing and laying controlled cement concrete M25 for foundation and superstructure (above plinth level) with vibrating, curing etc. complete including the cost of form work but excluding the cost of reinforcement for RCC work etc. complete at any height, 'as directed. ( Thrust Block )
240
-
-
Providing and casting in situ controlled cement concrete M30 bed blocks or pedestals and Seismic Restrainer of required size below bearings as per detailed drawings, centering, shuttering, scaffolding, wherever necessary, laying vibrating, curing and finishing complete.
60
-
-
Providing and fixing in position fully moulded restrained elastomeric Bearings as per detailed drawings.
322560
-
-
Providing and applying Coal Tar Epoxy protective paint for Pile Cap in two coats of DFT 210 microns for foundations /concrete surfaces in contact with soil complete as per Specifications and as directed by the Engineer including all leads and lifts etc. complete.
300
-
-
Providing and casting in situ controlled cement concrete M-35 for average 75 mm thick wearing coat laid as directed dincluding tamping, vibrating, finishing, curing and fillingin joints with bitumen complete. (more than 10 ton)
60
-
-
Supplying, cleaning, cutting, bending, welding, fabricating, erecting structural steel in position irrespective of locations and levels as per drawing including handling and transport etc. complete including applying two coats of primer red oxide and two coats of approved quality of paint over it etc. complete as directed for gentry girder, platform, stairs, chequered plate for cable trench etc. (Including roller with support)
108960
-
-
Providing and fixing in position (Thermo mechanically Treated bars) TMT Fe500 D conforming to IS 1786 reinforcing bars of various diameters.
For Pile
81
-
-
For Pile cap
27
-
-
Thrust box
36
-
-
Wearing coat
6
-
-
ELECTRO-MECHANICAL & INSTRUMENTATION WORKS FOR SEWAGE PUMPING STATION (SPS-01) AT SHELA Mechanical Work
SEWAGE SUBMERSIBLE NON CLOG PUMP-MOTOR SET
Supply, Installation, Testing and Commissioning of Submersible NC Pump-Motor set suitable for sewage application with semi-open or suitable type Impeller & wear Rings in CF8M with CI FG 260 Casing & casing cover, SS 410 shaft & with motor suitable for 3-Phase, 415 V, 50 Hz., AC induction Air filled dry type submersible motor of mini. rating as specified having max. 1500 RPM sync. speed, insulation Class 'F' With temp. rise limited to class B and IP-68 protection.
The scope shall include all required accessories viz. automatic coupling device, SS-304 heavy duty & of suitable size double guide pipes of length to suit the sump height with required supports, SS-304 or suitable stainless steel grade Chain with shackles (shall be with dual hook / shackles of 150mm or suitable higher size at app. every 1.5m C-C distance) & of length as per sump height + min. 3m, Submersible Power & control cable (copper flexible & stranded type conductor of reqd. cores & size for each pump motor set) & length of sump height + min. 10 m long each run with necessary electrical termination connection at junction box / starter panel and RCC foundation blocks for auto coupling & delivery bend & suitable to install pump set in new sump, PMU etc. complete as per IS and Specification and also including in scope any other parts / accessories / fittings required to complete the work in all respects & satisfactory operation of pump set.
Pump Capacity: 320 m3/hr (Pump Type-1), Head: 18 m Motor Rating: Min. 30 kW (or higher rating as reco. by pump manufacturer)
Over all Efficiency at Duty: min. 60.0 %
2
-
-
Pump Capacity: 390 m3/hr (Pump Type-2), Head: 18 m Motor Rating: 37 kW mini. (or higher rating as reco. by pump manufacturer)
Over all Efficiency at Duty: min. 63.0 %
2
-
-
VALVES
Supply, installation, testing and commissioning of Manually Operated CI Double Flanged, Non Rising Spindle type, Sluice Valve conforming to IS 14846, PN 1.0 with SS 304 seat rings and SS spindle with hot dipped galvanised hardware's, bolts, nuts & washers, gaskets, etc. as per data sheet. Size : 150 mm NB (Manually Operated - On Pump header drain)
1
-
-
Supply, installation, testing and commissioning of DI/CI Double Flanged Manually Operated Non Rising spindle Knife Gate Valves conforming to MSS SP-81 1995, PN 1.0, seat test pr. 6.0 kg/cm2 min. with SS gate, EPDM seal, SS rising spindle with all Stainless steel hardware, gaskets, & handwheel for emergency operation etc. complete as per IS and Specification. Size: 250 mm NB (On delivery of Type-1 pump)
2
-
-
Size : 300 mm NB (On delivery of Type-2 pump)
2
-
-
Size : 500 mm NB (on header after flow meter)
1
-
-
Supply, installation, testing & commissioning of Non slam, flanged, single door, swing type Non Return Valve conforming to IS 5312, Part 1 having pressure rating PN 1.0, having CI body and door, CF8M seat rings alongwith all necessary hardwares and complete as per IS and Specification.
Size : 250 mm NB (At Delivery of Type-1 Pump)
2
-
-
Size: 300 mm NB (At Del. of Type - 2 Pump)
2
-
-
Providing, supplying, testing and Commissioning of approved make CI Tempor proof Flanged Air Valve with Isolation Sluice Valve as per AWWA / IS 14845 PN-1.0 & IS-14846 PN-1.0 respectively with SS304 float, gun metal nozzle, complete hardware's, bolts, nuts & washers, gaskets etc. including all taxes, Insurance, Transportation, freight charges, Inspection charges, loading, unloading, conveyance to departmental stores, stacking, security etc. complete as per IS and Specification. Size: 150 mm NB (On common header- O/S the PH)
1
-
-
Supply, installation, testing and commissioning of Flange ends Expansion Bellow (PN 1.0) as per EJMA standards and as per specs. and complete in all respect.
Size : 250 mm x 300 mm (L) (on Del. of Type-01 pump)
2
-
-
Size: 300 mm x 300 mm (L) (on Del. of Type-02 pump)
2
-
-
Size: 350 mm x 300 mm (L) (On header near flow meter)
1
-
-
Size : 500 mm x 300 mm (L) (on header near KGV)
1
-
-
CI PIPES Supply, installation, connection, testing and commissioning of double flanged delivery and header CI pipes conforming to IS 1536 / 1537, Class B with connection and complete in all respect.
Size: 80 mm to 300 mm dia.
4350
-
-
Size: 350 mm to 650 mm dia.
2050
-
-
CI FITTINGS & SPECIALS Supply, installation, connection, testing and commissioning of Flanged delivery and header CI Fittings and Specials like 90 deg. Bend, Blind Flanges, Reducer / Enlarger, Duck foot bend, TEE, etc. conforming to IS 1538 and complete in all respect.
Size: 80 mm to 300 mm dia.
700
-
-
Size: 350 mm to 650 mm dia.
2800
-
-
MS PIPES & SPECIALS:
Supply, Gas cutting of pipe, Fabrication, welding, Installation, testing and commissioning of MS pipe & Specials, reducer, expander, bend, Y-Joint, TEE etc. conforming to IS 3589 & flanges confirming to IS 6392-PN-1.0, fabricated from MS. plate with necessary supports & anchoring. Pipe fabricated from MS plate. (Excluding supply of flange) Size: 150 mm NB X 4.5 mm Thk (For header drain line & for AV)
6
-
-
Size : 600 mm NB X min. 6.3 mm Thk
1
-
-
Supply, welding , Installation, testing & commissioning of MS flat machined faced flanges confirming to IS 6392 & drilled as per IS-1538 with drilling off centre bolt holes and flange thickness as per PN 1.0 including cutting & welding.
Size : 150 mm NB Drilled (for AV & subm. pump header drain line)
4
-
-
Size : 600 mm NB-Drilled
1
-
-
Size : 150 mm NB-Drilled Blind
1
-
-
Size : 500 mm NB-Drilled Blind
1
-
-
G.I. PIPES & FITTINGS:
Supply, installation, connection with equipments as required, testing and commissioning of GI pipe conforming to IS-1239 , Heavy Duty with coupling, tee, bend, union, elbow, flanges, etc. as all required fittings for connection complete with gaskets, hardware, and required accessories as per IS & Specifications
Size: 50 mm NB
10
-
-
Flanged Joints of Pipes, Fittings and Specials:
Supply, Installation, Making of Flanged CI / GI / MS Pipes, Fittings and Specials Joints with all jointing materials, rubber packing, nut bolts, labour etc.for complete connection.
Size: 150 mm dia
1
-
-
Size: 200 mm dia (or as per actual Type-01 Pump Del. Flange)
2
-
-
Size: 250 mm dia (or as per actual Type-02 Pump Del. Flange)
2
-
-
Size: 250 mm dia
12
-
-
Size: 300 mm dia
12
-
-
Size: 350 mm dia
5
-
-
Size: 500 mm dia
12
-
-
Size: 600 mm dia
1
-
-
SLUICE GATE
Supply, installation, testing and commissioning of Electric Actuator gear operated C.I. Sluice Gate conforming to AWWA C 501 or IS : 13349 - 1992 Class - 1 with rising spindle, single faced, wall thimble mounted, handwheel, flange back frame, head stock, Spindle with supports brackets having length as specified or to suit site condition, suitable for seating as well as unseating water head, complete in all respect.
Size : 600 mm X 600 mm - approx. 7.5 m spindle length (on each Inlet & outlet of screen chamber, at Inter compartment wall of sump) - Flush Bottom or suitable Closing
5
-
-
Size : 900 mm X 900 mm-approx. 6.2 m spindle length (at inlet pipe) - Conventional Bottom Closing
1
-
-
BOX TYPE MANUAL MESH SCREEN Supply, Installation, Testing and Commissioning of Box Type Manual mesh Screen having following size, made of SS 304 material having round bars of size 9 mm dia. with clear bar opening as specified here below, suitably welded in outer frame of equal Leg SS angle of size 50 mm x 50 mm x 6 mm thick or higher, with intermediate support at required locations, complete as per specs. & shall also including followings: The screen shall be with SS perforated Screening Material Collection Box at bottom end of Screen having size as specified, fabricated from 3 mm thk. SS sheet, screen shall be suitable to slide complete screen through rollers between existing guide channel of MCP 400, embedded/ fixed in wall on both sides of RCC wall up to top of chamber with all necessary hardware, SS nuts, bolts & washers, sacrificial Brass lugs on sides, min. two lifting lugs/hooks & SS lifting chain having intermediate link/chain of 300 mm dia. or suitable higher size at every 1.5 m distance with shackle, etc. complete in all respects and provided with 1 set of cleaning rake with each screen complete as per specification and complete in all respect.
Screen Size: 1000mm (W-or actual chamber width) x 1500mm (H) x 300 mm (D) Screening Box size: 300 mm height with width & depth as per screen Opening: 50 mm x 50 mm sq. opening.
(w/o Guide channel & MS supporting structure)
(Note: Screen suitable for 1000 mm wide screen chamber or to suit site requirement.)
2
-
-
Supply, installation, testing and commissioning of Mechanical Coarse Bar Screen with multiple rake blades, in SS 304 having 75 deg. angle of inclination to horizontal, having 20 mm clear opening between bars of size 10 mm thick and 50 mm depth suitable for installation in screen chamber of about 1.0 m wide X 8.05 m deep with max. 1.1 m LD and screen having clear inside width of min. 600 - 700 mm to suit channel width & with vertical bar height of 3.0 m, along with electrical control panel suitable for auto-manual operation, screening disposal arrangement up to ground level to drop on belt conveyor with all accessories & SS hardware’s, etc. as per tender drawing & Specification & complete in all respect.
Rakes shall be provided for every 1.5 to 2.0 m screen channel depth. The chain shall have a breaking load of min. 90 kN.
2
-
-
BELT CONVEYOR SITC of Belt coveyer shall be with sufficient length to cover Two screen chamber, approx. 4.0 m long X 600 mm wide & height as required.
1
-
-
SINGLE GIRDER EOT CRANE:
SITC of Single girder type E.O.T. crane with electrically operated hoist, class II duty, geared travelling trolly with lift as specified here below complete with long travel rail track (40 sq.mm. bar), moving or cross girder, all three motions electrically operated by suitable rating motor IP54, control panel, & down pendant control block, brake, safety device, cables from motor to starter panel & other required accessoaries & manufactured and tested as per IS-807, IS-3938 & IS-3177, class-II, complete as per IS & Specifications. Capacity: 2 Ton, (at Pump House)
Lift: 15.0 m or (or as per site)
Span: App.5.5 m (or as per site)
Bay length: App. 38 m (or as per site)
Note: Minimum as specified capacity or higher as per requirement such that EOT crane capacity is min.1.25 times of the pump /motor OR single heaviest component to be lifted within pump house.
1
-
-
MONORAIL EOT WITH ELECTRIC CHAIN HOIST
Supply, installation, testing & commissioning of Electrically Operated Chain Hoist & Electrically operated Trolley, suitable to operate on Mono Rail Girder having motorised motion in vertical lifting & cross travel, manufactured as per IS:6547-1972-Class-II & IS-3177- Class-II, complete with electrically operated chain hoist & Electically operated geared trolley, brake, chain-gear, motors, safety device, pendant push button, starter panel, cables from motor to starter panel and all other required accessories like limit switches, panel, power supply system (Fastoon cable type), fasteners, epoxy painting, etc. tested for over load as per IS complete as per specifications and complete in all respect.
Capacity : 1 Ton. Min. (For Manual mesh Screen)
'Lift : 11.00 m as mini. or as per site req. Bay Length : 6 m min. or as per site req. (w/o MONORAIL GIRDER & MS supporting structure)
Note: (1) Minimum as specified capacity or higher as per requirement such that ECH capacity is min.1.25 times of the pump/motor OR single heaviest component to be lifted within pump house.
1
-
-
PORTABLE DEWATERING / DESILTING PUMP
Supply and testing of Submersible non clog Portable Dewatering Pumpset with C.I. casing & CF8M impeller, 30 m flexible PVC delivery hose pipe of pump delivery size, rated for 6.0 kg / cm2 presure, 15 mtr SS lifting chain, 20m pair of cable for motor to starter panel, suitable for 3Phase, 415 V, 50 Hz AC supply and min. motor rating as indicated here below, Switch-Starter panel with PMU suitable inter lock for winding protection, moisture controller for fault detection and auto stop facility, with buit-in level switch for dry run protection and auto stop facility, 20 m suitable size power supply cable to starter panel, GI/CI pump stool and other required accessories for wet well. Capacity : 25 m3 / hr.
Head : 20 m,
Motor Rating: Mini. 5.5 kW (or higher rating as reco. by pump manufacturer)
1
-
-
Providing, Supply of Structure Steel at site of work with freight, loading, unloading carting, etc. including all taxes and duties complete such as joints, channels, angles, Iron Rails, ISA/ISMC/ISMB/MS flat, Plates, Chequered plates (below 10mm thickness) for cable trench etc. required for support structure of all Electro-mechanical equipment, piping, etc. for support on floor / wall / beam / brackets etc. as per tender and IS.
3000
-
-
Labour Charges for lowering, laying, Fixing with fabrication various size section of MS such as joints, channels, angles, Iron Rails, ISA/ISMC/ISMB/MS flat, Plates, Chequered plates, for cable trench etc Complete with two coats of red oxide and two coats of approved colour shade of epoxy paint as per relevant IS and as per specification.
3000
-
-
BIOLOGICAL TYPE ODOUR CONTROL SYSTEM SITC of Biological Type Odour Control System for SPS shall be provided as per Specification & complete the work in all respects, satisfactory operation of Odour Control System.
1
-
-
ELECTRICAL WORK
TPN MCCB (For LT Service Obtaining Requirement)
SITC of 250A TPN microprocessor MCCB (50kA) with O/L, S/C & E/F protection with Extended rotary handle, Terminal spreader, Auxiliary change over & Trip contact, with Outdoor Enclosure with canopy 2mm thick , Single/double door & Wall mounted/ stand mounted as per site requirement (with incoming & outgoing cable entry at bottom )with Cable end boxes with RYB indicating lamp, Digital voltmeter, VSS, ON,OFF & Trip indicating lamp etc as per Power supply company requirements & location. (Wall mounted at Location as per PSC req.)
1
-
-
MEDIUM VOLTAGE PANEL BOARD (PMCC /APFC)
SITC of PMCC Panel (50kA), compartmentalized, floor mounted, operating height maximum 1800/1900 mm, Extensible on both ends, suitable for Manual & Auto operation -Local & through PLC/SCADA operation as per site conditions complete in all respects as per Tender SLD / Specification / IS and including following as minimum:
(1) One no. FP 250A Microprocessor MCCB (50kA), LSIG for I/c with Digital Voltmeter, Voltmeter selector switch, Digital Ammeter, Ammeter selector switch, MFM with RS-485 of Class-0.5, Indicating lamps R,Y,B,On,off,Trip, 3nos. 250A/5A, Cl.-0.5 metering CT, CL 0.5 CT for APFC relay etc. Constant voltage/control voltage transformer 1500VA, 415V/230V AC, with tapping +/-5% in steps of 2.5%, 16A DP MCB.
(2) 250A TPN Main busbars. (main busbars size with current density 0.8A/Sq.mm)
(3)30 KW STAR -DELTA STARTER FEEDER: 2 NOS:
30 KW or higher rating as per motor vendor Star-delta starter with 125A TPN Thermal magnetic MCCB with Adjustable O/L & Adjustable S/C protection, 95A AC3 duty contactors (3 Nos), O/L Relay, star-delta timer, PMU, CT, ASS, Ammeter, Auto-Manual, Local Remote Selector Switch, MPR with RS-485, ON, OFF, TRIP Indication & pushbutton etc. for S/D starter. complete in all respects. (4)37 KW STAR -DELTA STARTER FEEDER: 2 NOS:
37 KW or higher rating as per motor vendor Star-delta starter with 160A TPN Thermal magnetic MCCB with Adjustable O/L & Adjustable S/C protection, 95A AC3 duty contactors (3 Nos), O/L Relay, star-delta timer, PMU, CT,MFM with RS-485, Auto-Manual, Local Remote Selector Switch, MPR with RS-485, ON, OFF, TRIP Indication & pushbutton etc. for S/D starter. complete in all respects. (5) 60 KVAR APFC POWER FEEDER: 1 NO.
Each feeder comprising of 160A TPN Thermal Magnetic (TM) MCCB with Digital Ammeter, ASS, CT, Indicating lamp, etc.complete in all respects.
(6) 32A TPN TM MCCB FEEDER : 3 Nos.(1 no. for screen panel, 1 no. for MOG PDB, 1no. spare)
Each feeder comprising of 32A TPN Thermal Magnetic (TM) MCCB, with indicating lamp etc. (7) 63A TPN TM MCCB FEEDER FOR ALL MCB FEEDERS: 1 set: Incomer: 63A TPN Thermal Magnetic (TM) MCCB, with indicating lamp etc. 7.1) 7 nos. 32A 'C' curve 4P MCB feeders (for 1no. Ind LDB, 1 no. for EOT crane, 1 no, for EOT with ECH, 1 no for portable dewatering pump, 2 nos. spare, 1 no for ICP/ PLC panel) 7.2) 1 nos. 32A 'C' curve 4P MCB with Time switch,32A contactor 4P,ON lamp feeders (for Outdoor LDB)
7.3) 2 nos. 16A DP MCB feeders (for 2 nos. Spare.) (8) Multiplication relay as required for dry run protection of pumps. NOTE: 1). All MCCB shall be 50KA, Ics = 100% Icu, inbuilt protection with adj O/L and Adj.S/c (LSIG for MP MCCB), Extended rotary handle, Terminal spreader,Auxiliary Change over contact and trip contact as required. 2) All MFM, ACB, Soft Starter,MPR,Temp.Scanner etc shall be with inbuilt RS 485.
1
-
-
SITC of 60 KVAR at 415V, APFC Panel,compartmentalised, floor mounted, extensible type on both sides with Horizontal bus bar arrangement as per site requirement & complete in all respects as per SLD / Specification / IS and including following as minimum:
(1) INCOMER: 1.1 160A MCCB 50 KA, TPN, TM release,Voltmeter, VSS, Ammeter, ASS, resin cast CT, Cl 1.0, 10VA, Indicating lamps, A/M switch etc.
1.2 Microprocessor based APFC Relay,144sq.mm, 8 STEP with RS 485 with minimum operating current 10mA.
2. OUTGOING CAPACITOR FEEDER:
Capacitor feeder of following rating comprising of TPN MCCB/MCB, Capacitor duty contactor, 415V Heavy duty MPP / gas filled capacitor unit, A/M Switch, ON Delay timer,ON / OFF Push button, ON Indication lamp etc. as per Tender SLD& Specification 2.1 20 KVAR FEEDER: 2 NOS
2.2 10 KVAR FEEDER: 1 NOS 2.3 5 KVAR FEEDER: 2 NOS
2.4.Two nos. Vacant feeder suitable for 1-20 KVAr and 1-10KVAr to be provided.
NOTE: 1. Heavy duty 8" cooling/exhaust fan : 2 nos Minimum or higher as required at the top of the panel with canopy/hood.
1
-
-
SITC of Lighting Distribution Board as under:
3 Phase 4 Wire TPN, Prewired LDB (for Indoor & Outdoor Lighting) Suitable to house :
Incoming: 32A FP, ELMCB (30mA)
Outgoing: 20A SP MCB (9 nos.) & 6A SP MCB (9 nos.)
(At Panel Room)
2
-
-
3 Phase 4 Wire TPN, 8 way Pre-wired-MOG PDB for Auxiliary accessories Load power supply (For MOG, rest spare)
Incoming: 63A 4P, MCB 'C' Curve
Outgoing: 8 nos. 32A 4P MCB 'C' Curve
1
-
-
SITC of LCS pushbutton station ON & OFF (E-stop) set complete with Enclosure, necessary mounting/ fixing arrangement on wall / pipe support etc. to be installed near motors for remote operation, etc. as per IS and specifications. (including structural steel) (For 4 nos. for Pump )
4
-
-
LOW VOLTAGE (LT) CABLES Supply, laying, testing and commissioning of 1.1 kV, A2XFY(X)/2XWY(X) XLPE insulated (IS 7098) Al. / Cu stranded conductor, Extruded innersheath cables as per specification & IS. The cable when laid outside the building shall be laid underground in excavated trench, as per specified method and shall be laid in prepared trench/ on cable tray when laid inside the building.
3.5C x 240 sq. mm. A2XFY(X) Cable (1 run for MCCB to PMCC panel)
40
-
-
3.5C x 95 sq. mm. A2XFY Cable (1 run from PMCC panel to 1 no. APFC Panel)
25
-
-
4C x 10 sq. mm. A2XFY (X) Cable (For 1 no MOG PDB )
25
-
-
4C x 6 sq. mm. A2XFY Cable (For Mechanical Screen panel, WR-DB with TPN MCB at Pump House, Indoor LDB, Outdoor LDB, for 6 nos. street light )
260
-
-
4C x 2.5 sq. mm. 2XWY/2XFY Cable (For TPN MCB for Elect. Hoist at Pump House, for EOT with ECH, for Portable dewatering pump, for 2 nos. mech screen & belt conveyor, 6 nos MOG & PLC panel)
250
-
-
Supply of 5C x 1.5 sq.mm. 2XWY(X) Cable (For 4 nos. Pump LCS)
100
-
-
Single core 95sq. mm. PVC insulated circular unsheathed copper conductor flexible Cable (For Power supply Metering Panel to I/c MCCB Unit)
30
-
-
CABLE END TERMINATION AND CONNECTION:
SITC of Double compression weather proof type Ni-plated brass cable glands and crimping type Bimetallic lugs / sockets with necessary tools and equipments as specified in specifications and IS. The glands and lugs / sockets shall be suitable for cable size and type mentioned below & as per specifications.
1) Earthing the glands and armouring with earthing clamp and jumper and also connecting to common earth bar.
2) The job also includes, if necessary, supply & fixing of extension busbar of same material on MCCB or panel board terminal / connector to connect more than one no. of parallel cables or to connect higher size cable to lower size unit. The job also includes earthing the glands and armour of the cable with common earth bar or flexible copper mesh.(Cable termination qty. shall be as per site requirement) 3.5C x 240 sq. mm. A2XFY(X) Cable (1 run for MCCB to PMCC panel)
2
-
-
3.5C x 95 sq. mm. A2XFY Cable (1 run from PMCC panel to APFC Panel)
2
-
-
4C x 10 sq. mm. A2XFY (X) Cable (For 1 no MOG PDB )
2
-
-
4C x 6 sq. mm. A2XFY Cable (For Mechanical Screen panel, WR-DB with TPN MCB at Pump House, Indoor LDB, Outdoor LDB, for 6 nos. street light )
20
-
-
4C x 2.5 sq. mm. 2XWY/2XFY Cable (For TPN MCB for Elect. Hoist at Pump House, for EOT with ECH, for Portable dewatering pump, for 2 nos. mech screen & belt conveyor, 6 nos MOG & PLC panel)
26
-
-
5C x 1.5 sq.mm. 2XWY(X) Cable (For 4 nos. Pump LCS)
8
-
-
Single core 95sq. mm. PVC insulated circular unsheathed copper conductor flexible Cable (For Power supply Metering Panel to I/c MCCB Unit)
10
-
-
CABLE TRAY
SITC of G.I. Ladder/ Perforated type with top cover medium duty (2mm thick) Cable Tray with necessary bends, tees, coupler plate and clamps for fixing. All material shall be Hot dip galvanised as per Specification.
300 x 100 mm - Ladder type
20
-
-
150 x 50 mm - Ladder type
80
-
-
Cable Trench, Laying & Installation of Cable: Making cable trench in soft soil of suitable width of 90cms deep for laying cable, Sand cushioning and brick protection on sides and on top all over the run and back filling the same and making the surface as normal ground as per IS & Specification. (For laying of LT cable in ground)
100
-
-
CHEMICAL EARTHING SYSTEM
SITC of Maintenance free chemical earthing (copper) with earthpit of minimum bore size dia. 225mm Safe Earthing Electrode consisting Pipe-in-Pipe Technology as per IS-3043:1987 /Tech spec. made of corrosion free Pipes having Outer pipe dia of 48 mm having 250 Micron copper plating, Inner corrosion free Hot dip galvanised (80 to 100 micron) pipe dia of 26 mm with copper flat strip type connection terminal 14mm dia with constant ohmic value surrounded by highly conductive corrosion resistant chemical compound with high charge dissipation suitable for electrical installation & of 3Mtr. length of Pipe with two nos. 25Kg. bag of Back filling compound.. (2 nos for ICP/PLC Earthing ) NOTE: Earthing Resistance value & date shall be painted on the chamber cover.
2
-
-
SITC of Maintenance free chemical earthing with earthpit of minimum bore size dia. 225mm Safe Earthing Electrode consisting Pipe-in-Pipe Technology as per IS-3043:1987 /Tech spec. made of corrosion free Hot dip Galvanised (min 150 Microns) Pipes having Outer pipe dia of 76 mm , Inner corrosion free Hot dip galvanised (80 to 100 micron) pipe dia of 26 mm with copper flat strip type connection terminal 14mm dia with constant ohmic value surrounded by highly conductive corrosion resistant chemical compound with high charge dissipation suitable for electrical installation & 3Mtr. length of Pipe with two nos. 25Kg. bag of Back filling compound. (2nos. for PMCC panel & all elect. Equipments)
NOTE: Earthing Resistance value & date shall be painted on the chamber cover.
4
-
-
SITC of pipe type earthing having 150 cms long and 2.5cms dia. Galvanised iron pipe with coupling and buch buried in specially prepared earth pit complete with necessary 8 SWG earth wire (For 2nos.Gate light, 6 nos for street light)
7
-
-
SITC of 50mm (w) x 6mm (T) etc. sizes as required, HOT dip galvanized GI Strip including supply & fixing using GI spacers, saddles when laid inside the building and inclusive of excavation & refilling of earth when laid outside the building & interconnection with earth pit & all electro-mechanical equipments. (50X6 G.I Strip wt.2.3 kg/m, 2.3x100Mt.=230kg.)
230
-
-
Supply, laying and erection of 25mm (w) x 3mm (T) etc. sizes as required, HOT dip galvanized GI Strip including supply & fixing using GI spacers, saddles when laid inside the building and inclusive of excavation & refilling of earth when laid outside the building & interconnection with earth pit & all electro-mechanical equipments. (25X3 G.I Strip, 0.6 Kg/m, 0.6x50Mt.=30Kg.)
30
-
-
Supply, laying and erection of 25mm (w) x 3mm (T) etc. sizes Copper Strip including supply & fixing of bolts, saddles when laid inside the building and inclusive of excavation & refilling of earth when laid outside the building & interconnection with earth pit & PLC panel. (25 X3 Cu. Strip, 0.761 Kg/m, 0.761 x 20mtr.=15.22Kg.)
Copper Bolt,Nuts ,Washers shall be used for Connecting Earth electrode to individual eqp. Bitumen shall be used at the place of joint/welding. (PLC panel to Earthing)
15
-
-
SITC of HOT Dip Galvanized iron strip wire 8 SWG (For LDB, LCS, etc.) (8 SWG G.I Strip, 0.103 Kg/m, 0.103 x 100Mt.=10)
10
-
-
INTERNAL WIRING
SITC of Mains & outlet points wiring with 1.1 kV grade FRLS PVC insulated ISI marked flexible stranded copper conductor wires with medium class min. 25mm. dia. Rigid PVC pipe and accessories to be erected concealed in / to be run on surface / wall / ceiling with following sizes as mentioned below. The unit rate wirings shall be with connector, PVC junction box, wires, holder, ceiling rose, angle holder, switch, sockets, switch board, brass chromium / cadmium plated machine screws, phase and neutral wires, green Earth continuity wires etc. as required to complete wiring from LDB panel to the final outlet termination points. The wiring shall be as per IS:732, IS:4648 and as per tender specification / IS. Mains wiring with 3 wire 1.5 sq.mm.
60
-
-
Mains wiring with 3 wire 2.5 sq.mm
40
-
-
Mains wiring with 4 wire 1.5 sq.mm
40
-
-
Mains wiring with 4 wire 2.5 sq.mm
40
-
-
SITC of Point wiring for Light / fan / Bell / Primary Point with 2nos. 1.5 sq. mm & earth wire of 1.5 sq. mm (green) both are of ISI marked 1.1 kv grade FRLS PVC insulated multistrand copper wires, pipe to be erected concealed in flushed on wall / ceiling, complete with 6A Tissino Type ISI marked flush type switch / bell push & accessories erected on metal / PVC Box covered with 3 mm thick PC (Polycarbonate) / Acrylic sheet with necessary lamp holder / ceiling Rose / H. D. connector as directed with medium class Rigid PVC pipe & accessories.
25
-
-
SITC of 6A independent Plug with 2nos. 1.5 sq.mm Cu. Mains size wiring & earthwire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires with medium class Rigid PVC pipe and accessories to be erected on wall / ceiling, complete with ISI marked 3 / 5 Pin socket and tissino type switch erected with earth continuity connection erected on Metal / PVC box covered with 3 mm thick PC(Polycarbonet) / Acrylic sheet. (2no. for LT Room, 2 nos for pump house, 2 nos for office)
6
-
-
SITC of 6/16A independent Plug with 2nos. 4 sq.mm Cu. Mains size wiring & earthwire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires with medium class Rigid PVC pipe and accessories to be erected on wall / ceiling, complete with ISI marked 3 / 5 Pin socket and tissino type switch erected with earth continuity connection erected on Metal / PVC box covered with 3 mm thick PC(Polycarbonet) / Acrylic sheet. (For 2nos. LT Room, 2 nos for pump house, 2 nos for office)
6
-
-
SITC of Single Phase 20A 3 Pin Metal clad Industrial Type Socket with plug top and 20A SPMCB, suitable for flush mounting, in 16 SWG MS box of suitable size and covered with 3 mm thick electrical grade hylam sheet or equivalent ISI marked Electrical grade Bakelite sheet and earthing with 2.5 sq.mm insulated copper wire run inside the conduit including interconnections etc. complete as required. (1no.for LT Room,1 no for Pump House)
2
-
-
SITC of Sheets steel powder coated weather proof enclosure suitable for as well as with incorporating One no. 32A, 415V MCB Four Pole for Motor & Inductive load (C Curve) having 10 KA breaking capacity & confirms to IS: 8828. (For 1 no WR DB at pump house, 1 no EOT crane at pump house, 1no for portable dewatering pump, 1 no for EOT with ECH )
4
-
-
LED LIGHT FIXTURES & LIGHTING:
SITC of Indoor wall mounting 20Watt or up to 25% higher wattage LED 4 feet Tube Light indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA polyester powder coated and high U.V. & corrosion resistance with diffuser and/or Polycarbonate optics with company mark/name 120 to 300 V,Power Factor more than 0.9, THD 20 %,
CCT 4000 K to 6500K, Uniformity ratio 0.7,
Luminaire efficacy 85 lumens/watt ,
LED driver efficiency 85 %
(Each fitting required LM-79 & LM-80 Certificates)
Tube Light with integral / non-integral driver, Surge-4KV,IP-20, 4 feet, Cat-III (For 2 nos. for office, 6 nos. at LT room, 4 nos. at Pump House, 1 no at toilet)
13
-
-
3 watts LED Lamps integral type,cool white with PC diffuser suitable for B22 LAMP holder (For 1no. At office, 1 no. at LT Room, 1 no. at Pump house).
3
-
-
SITC of 40W LED Surface / Wall mounted LED Flood Light fittings with High power White LEDs wattage of 1Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses with company mark/name engraved or embossed 120 to 300 V,Power Factor more than 0.95, THD 20 %, CCT 5000 K to 5700K,
Uniformity ratio 0.45, Luminaire efficacy 85 lumens/watt . LED driver efficiency 85 %.
( Each fittings required LM-79 & LM-80 certificates) (IP-65), Surge -4KV Cat-III For Indoor use: (2 nos. at Pump House)
2
-
-
SITC of 'B' class galvanised iron pipe 32 mm outside dia 45 cms long duly welded on 20 cms x 20 cms x 3 mm thick M.S. base plate, erected on wall or corner for mounting luminaries with necessary hardware materials duly painted for wall mounting indoor flood light fixtures on Wall of Buildings & post top lantern.
9
-
-
1200mm sweep ceiling fan, capacitor type, having double ball bearing 450mm down rod, canopies, shackle, rubber bush, blades, electronic speed regulator, suitable to operate on 230V,50Hz AC supply conforming to IS: 374/1979.Fan shall be painted with white colour.(1 nos. at office & 1 no. at LT Room)
2
-
-
EXTERNAL LIGHTING (Flood LIGHT):
SITC of 70W LED Wall mounted LED Flood Light fittings with High power White LEDs wattage of 1Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses with company mark/name engraved or embossed 120 to 300 V,Power Factor more than 0.95, THD 20 %, CCT 5000 K to 5700K,
Uniformity ratio 0.45, Luminaire efficacy 85 lumens/watt . LED driver efficiency 85 %.
( Each fittings required LM-79 & LM-80 certificates) (IP-65), Surge -4KV Cat-III For Outdoor use: (5 nos. for area lighting)
5
-
-
SITC of 40watt, Cat-III Post Top Lantern LED fitting comprises of 650 MM TOP Diameter, 120 degree beam angle with 3 Nos. Supporting Ribs and with 0.5mt. G.I. fitting pipe (for Gate light)
2
-
-
EXTERNAL LIGHTING (STREET LIGHT):
SITC of Street Light Pole, steel tubular swaged type, 7.5 meter long with single arm & M.S.base plate with pipe cap and over hung 1.5 m long having dia to suit the socket of 240V LED street light fixtures. Street light pole unit rate shall be with (i) IP 65 SMC box of size 20 x 15 x 15 cms. with MCB & terminal strip inside the box with hinged/sliding door (ii) 50mm dia, B class GI pipe bracket min.1.5mtr long for Incoming & outgoing cable (iii)MS Cable Clamp of 25 x 3mm (iv)SITC of 1.5 Mtr.single Arm bracket of medium duty MS pipe of 4.2 cms. Out side dia complete with suitable sleeve tubing 45 cms. long of required size of pole top etc. and having spread of 1.5.mtr. length with 110 deg.(v) Complete painted with one coat of Red oxide / PU base primer and two coats of Aluminium / PU paint for Pole,Arm, pipe etc.
6
-
-
SITC of 70W LED Street light fittings with High power White LEDs wattage of 1Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses with company mark/name engraved or embossed 120 to 300 V,Power Factor more than 0.95, THD 20 %, CCT 5000 K to 5700K,
Uniformity ratio 0.45, Luminaire efficacy 85 lumens/watt . LED driver efficiency 85 %.
( Each fittings required LM-79 & LM-80 certificates) Street Light (IP-65), Surge -4KV, 70 watt Cat-III
6
-
-
SITC of M-20 / 1:2:4 cement concrete foundation for Street light pole & 70 % PCC from bottom including excavation for the pole of size 60 x 60 x 120 cms. Deep in below ground level with plinth of 45 cms x 45 cms(or 45 cms dia x 45 cms) high upper ground level with necessary curing and finishing in approved manner.
6
-
-
SAFETY ACCESSORIES
SITC of following safety accessories complete with necessary fixing brackets, other accessories and tools etc. as required to complete the job.
Supply & Erecting carbon dioxide (CO2) fire extinguisher of 6.5kg capacity with necessary clamps made from 50 x 6 mm M.S. Flat with nut & bolts grouted in wall complete. ( 1no. for LT Room)
1
-
-
Supplying of standard first AID box with antiseptic cream, medicine for use on wounds due burn, crepe bandage, guage bandage, medicated ready to use bandage (Band-aid) adhesive tape for medicinal user, scissors, antiseptic solution (Savlon or similar) etc. (All above contents shall be of standard makes) (1no. For LT Room)
1
-
-
Supply & fixing of printed instruction (First Aid) Chart both in English and Gujarati and duly framed with front glasses, for treatment of person suffering from electric shock. (1 no. For LT Room)
1
-
-
Supply and fixing of 20 W fluorescent lamp operated emergency light with maintenance free battery for 3 hours operation during mains power failure. (for 1no. LT Room)
1
-
-
Supply and laying of Synthetic Insulating Mat of Class - A of min. thickness 2mm as per IS:15652 and with good electrical insulation property for 1.1KV/3.3KV as per site requirement. (for LT Panel)
8
-
-
Providing pair of rubber hand gloves ISI make suitable for working on 22 KV supply
1
-
-
LIASONING CHARGES FOR OBTAINING NOC
Power Liasoning Charges for obtaining N.O.C from Electrical Inspector / Statutory authority for Power / Ele. Installation. (Fees shall be paid by tenderer for obtaining N.O.C. from Electrical Inspector / Statutory authority on behalf of client and shall be reimbursed on submission of original receipt to Client).
Liasoning Charges shall include preparing required attested documents & drawing for obtaining NOC on behalf of client (Applicable Fees / deposits shall be reimbursed by Client).
1
-
-
INSTRUMENTATION WORK
PRESSURE MEASURING SYSTEM
Supply, installation, testing & commissioning of Diaphragm Type pressure guage having 150 mm dial with necessary fittings/accessories in SS 316, manifold valve, snubber, nipples etc. complete.
Range :0 - 1.2 Kg/cm2 (at pump's delivery side)
4
-
-
LEVEL MEASURING SYSTEM
Supply, installation, testing and commissioning of Diff. Ultrasonic Level Transmitter along with all mounting accessories, hardware, etc. complete in all respects and as per specs & with relay output for autu operation of screen and having following measurement ranges for liquid (Sewage) application:
Meas. Range: upto 10 m ( for U/S & D/S of Mech. Screen)
2
-
-
Supply, installation, testing and commissioning of Ultrasonic type Level Transmitter along with all mounting accessories, hardware, etc. complete in all respects and as per specs and having following measurement ranges for liquid (Sewage) application:
Meas. Range: upto 10 m ( at both Compartment of Wet Well)
2
-
-
Supply, installation, testing and commissioning of Float Type Level Switch along with 10 mtr cable and WP Junction Box (at both Compartment of wet well for dry run protection of pumps and alarm and at upstream of manual scrreen for high level alarm ) complete in all respects and as per specs.
4
-
-
ELECTRO MAGNETIC FLOWMETER Supply, installation, testing and commissioning of remote type Full Bore Electromagnetic flow meter comprising of IP-68 Sensor, IP-66 remote transmitter with 20 m cable between sensor and transmitter along with all accessories, hardware, etc. The scope also includes necessary connection with header pipe.
Meter size: 350 mm NB
Pipe Size : 500 mm NB
Flow Measurement Range : 180- 900 M3/ hr.
1
-
-
PLC BASED INSTRUMENT CONTROL PANEL
Supply, Installation, Testing & Commissioning of PLC Based Instrument control Panel with 10" color HMI, 4G GPRS Modem for Remote data transmission to concerned STP SCADA / Central SCADA, SIM Card,Communication with MFM at PMCC Panel, Open protocol connectivity along with required Ethernet switch,etc. Instrument Control Panel '(PLC Enclosure / Panel ) with necessary PLC based logic and wiring , Min 1 nos. flow indicator/totalizer, Min. 2 nos. process Indicator, Min 3 no. analog signal multiplier, , Min. 1 kVA UPS (with 30 min backup alongwith filter for harmonic, suitable rating SMF batteries alongwith battery charger, cabling between UPS and battery and all other accessories as per standard), etc. complete in all respects and as per specs PLC having minimum I/O count of 60DI / 24DO / 10AI / 0AO.
All work shall be carrierd out complete in all respects and as per tender specifications.
1
-
-
INSTRUMENT CABLE & ACCESSORIES
Supply, Laying, Installation, Connection, Termination, Testing & Commissioning of Instrument Cables, along with cable glands, lugs, cable trays, required junction boxes, fittings and accessores as per specs. The unit rate shall include. (a) Supply, loading & unloading of the cable at site from store. (b) Shifitng of cable from site store to place of installation. (c) Fixing of cable clamps, brackets, supports, route markers etc. where ever required to fix the cables safely. (d) Excavation, back filling and levelling of ground alongwith laying of fine sand, protection bricks and other necessary civil material for laying cables outside the building. POWER CABLE
3C X 1.5sq.mm.
150
-
-
CONTROL CABLE 10C X 1.5sq.mm.
500
-
-
SIGNAL CABLE
1P X 1.5sq.mm.
500
-
-
INSTRUMENT CABLE TRAY G.I. Perorated type cable tray shall be made out of galvanized mild steel sheets of 2 mm thickness with required asccessories . All material shall be Hot dip galvanised as per IS 2629 ( as mentioned in specification and tray hardware shall be in GI.
200 X 25 mm - Perforated type
30
-
-
50 X 25 mm - Perforated type
50
-
-
CABLE END TERMINATION AND CONNECTION : 'Supply, fixing, connection, testing and commissioning of double compression brass cable glands and crimping type Bimetalic lugs / sockets with necessary tools and equipments as specified in specifications and IS complete in all respects. The glands and lugs / sockets shall be suitable for cable size and type mentioned above. The job also includes earthing the glands and armour of the cable with common earth bar or flexible copper mesh as applicable. POWER CABLE
3C X 1.5sq.mm
10
-
-
CONTROL CABLE
10C X 1.5sq.mm
26
-
-
SIGNAL CABLE 1P X 1.5sq.mm.
22
-
-
TOOLS & TEST EQUIPMENTS
Magger of range 0 -1000V
1
-
-
Clipon meter (Battery operated) satisfying the following.
(i)With 0.100 mA, 0-1 A and 0-200 A AC
(ii) With 0-100 mV, 0-3 V, 0-30 V, 0-300 V and 0-1000 V
(iii) Least five (0-100) m.Ohm,(0-1) Ohm, (0-10) Ohm, (0-100) Ohm, (0-1000) Ohm.
(iv) The input impedence shall not be less than one maga ohms for voltage range.
1
-
-
Single Phase Elect. Portable Air blower 1500 RPM
1
-
-
LADDER
Ladder shall be made out of light aluminium allow of good strength. They shall be of step ladder, foldable, self supportig type with sperader of metalic angles or high strength.
3 Meter long
1
-
-
6 Meter long
1
-
-
Steel Office chair
2
-
-
Steel cupboard (6 feet H x 3.5 feet W x 1.0 feet 4 inch D)
1
-
-
ELECTRO-MECHANICAL & INSTRUMENTATION WORKS FOR SEWAGE PUMPING STATION (SPS-02) AT SHELA MECHANICAL WORK
SEWAGE SUBMERSIBLE NON CLOG PUMP-MOTOR SET
Supply, Installation, Testing and Commissioning of Submersible NC Pump-Motor set suitable for sewage application with semi-open or suitable type Impeller & wear Rings in CF8M with CI FG 260 Casing & casing cover, SS 410 shaft & with motor suitable for 3-Phase, 415 V, 50 Hz., AC induction Air filled dry type submersible motor of mini. rating as specified having max. 1500 RPM sync. speed, insulation Class 'F' With temp. rise limited to class B and IP-68 protection.
The scope shall include all required accessories viz. automatic coupling device, SS-304 heavy duty & of suitable size double guide pipes of length to suit the sump height with required supports, SS-304 or suitable stainless steel grade Chain with shackles (shall be with dual hook / shackles of 150mm or suitable higher size at app. every 1.5m C-C distance) & of length as per sump height + min. 3m, Submersible Power & control cable (copper flexible & stranded type conductor of reqd. cores & size for each pump motor set) & length of sump height + min. 10 m long each run with necessary electrical termination connection at junction box / starter panel and RCC foundation blocks for auto coupling & delivery bend & suitable to install pump set in new sump, PMU etc. complete as per IS and Specification and also including in scope any other parts / accessories / fittings required to complete the work in all respects & satisfactory operation of pump set.
Pump Capacity: 300 m3/hr (Pump Type-1), Head: 18 m, Motor Rating: Min. 30 kW (or higher rating as reco. by pump manufacturer)
Over all Efficiency at Duty: min. 60.0 %
2
-
-
Pump Capacity: 370 m3/hr (Pump Type-2), Head: 18 m Motor Rating: 37 kW mini. (or higher rating as reco. by pump manufacturer)
Over all Efficiency at Duty: min. 63.0 %
2
-
-
VALVES
Supply, installation, testing and commissioning of Manually Operated CI Double Flanged, Non Rising Spindle type, Sluice Valve conforming to IS 14846, PN 1.0 with SS 304 seat rings and SS spindle with hot dipped galvanised hardware's, bolts, nuts & washers, gaskets, etc. as per data sheet. Size : 150 mm NB (Manually Operated - On Pump header drain)
1
-
-
Supply, installation, testing and commissioning of DI/CI Double Flanged Manually Operated Non Rising spindle Knife Gate Valves conforming to MSS SP-81 1995, PN 1.0, seat test pr. 6.0 kg/cm2 min. with SS gate, EPDM seal, SS rising spindle with all Stainless steel hardware, gaskets, & handwheel for emergency operation etc. complete as per IS and Specification. Size : 250 mm NB (On delivery of Type-1 & 2 pump)
4
-
-
Size : 500 mm NB (on header after flow meter)
1
-
-
Supply, installation, testing & commissioning of Non slam, flanged, single door, swing type Non Return Valve conforming to IS 5312, Part 1 having pressure rating PN 1.0, having CI body and door, CF8M seat rings alongwith all necessary hardwares and complete as per IS and Specification.
Size : 250 mm NB (At Delivery of Type-1 & 2 Pump)
4
-
-
SITC of approved make CI Tempor proof Flanged Air Valve with Isolation Sluice Valve as per AWWA / IS 14845 PN-1.0 & IS-14846 PN-1.0 respectively with SS304 float, gun metal nozzle, complete hardware's, bolts, nuts & washers, gaskets etc. including all taxes, Insurance, Transportation, freight charges, Inspection charges, loading, unloading, conveyance to departmental stores, stacking, security etc. complete as per IS and Specification. Size: 150 mm NB (On common header- O/S the PH)
1
-
-
Supply, installation, testing and commissioning of Flange ends Expansion Bellow (PN 1.0) as per EJMA standards and as per specs. and complete in all respect.
Size : 250 mm x 300 mm (L) (on Del. of Type-01 & 2 pump)
4
-
-
Size: 350 mm x 300 mm (L) (On header near flow meter)
1
-
-
Size : 500 mm x 300 mm (L) (on header near KGV)
1
-
-
CI PIPES Supply, installation, connection, testing and commissioning of double flanged delivery and header CI pipes conforming to IS 1536 / 1537, Class B with connection and complete in all respect.
Size: 80 mm to 300 mm dia.
3800
-
-
Size: 350 mm to 650 mm dia.
2050
-
-
CI FITTINGS & SPECIALS Supply, installation, connection, testing and commissioning of Flanged delivery and header CI Fittings and Specials like 90 deg. Bend, Blind Flanges, Reducer / Enlarger, Duck foot bend, TEE, etc. conforming to IS 1538 and complete in all respect.
Size: 80 mm to 300 mm dia.
600
-
-
Size: 350 mm to 650 mm dia.
2800
-
-
MS PIPES & SPECIALS:
Supply, Gas cutting of pipe, Fabrication, welding, Installation, testing and commissioning of MS pipe & Specials, reducer, expander, bend, Y-Joint, TEE etc. conforming to IS 3589 & flanges confirming to IS 6392-PN-1.0, fabricated from MS. plate with necessary supports & anchoring. Pipe fabricated from MS plate. (Excluding supply of flange) Size: 150 mm NB x 4.5 mm Thk (For header drain line & for AV)
6
-
-
Size : 600 mm NB X min. 6.3 mm Thk
1
-
-
Supply, welding , Installation, testing & commissioning of MS flat machined faced flanges confirming to IS 6392 & drilled as per IS-1538 with drilling off centre bolt holes and flange thickness as per PN 1.0 including cutting & welding.
Size : 150 mm NB- Drilled (for Air Valve & pump header drain line)
4
-
-
Size : 600 mm NB-Drilled
1
-
-
Size : 150 mm NB-Drilled Blind
1
-
-
Size : 500 mm NB-Drilled Blind
1
-
-
G.I. PIPES & FITTINGS:
Supply, installation, connection with equipments as required, testing and commissioning of GI pipe conforming to IS-1239 , Heavy Duty with coupling, tee, bend, union, elbow, flanges, etc. as all required fittings for connection complete with gaskets, hardware, and required accessories as per IS & Specifications
Size: 50 mm NB
10
-
-
Flanged Joints of Pipes, Fittings and Specials:
Supply, Installation, Making of Flanged CI / GI / MS Pipes, Fittings and Specials Joints with all jointing materials, rubber packing, nut bolts, labour etc.for complete connection.
Size: 150 mm dia
1
-
-
Size: 200 mm dia (or as per actual Type-01&2 Pump Del. Flange)
4
-
-
Size: 250 mm dia
24
-
-
Size: 350 mm dia
5
-
-
Size: 500 mm dia
12
-
-
Size: 600 mm dia
1
-
-
SLUICE GATE
Supply, installation, testing and commissioning of Electric Actuator gear operated C.I. Sluice Gate conforming to AWWA C 501 or IS : 13349 - 1992 Class - 1 with rising spindle, single faced, wall thimble mounted, handwheel, flange back frame, head stock, Spindle with supports brackets having length as specified or to suit site condition, suitable for seating as well as unseating water head, complete in all respect.
Size : 600 mm X 600 mm - approx. 7.5 m spindle length (on each Inlet & outlet of screen chamber, at Inter compartment wall of sump) - Flush Bottom or suitable Closing
5
-
-
Size : 900 mm X 900 mm-approx. 6.0 m spindle length (at inlet pipe) - Conventional Bottom Closing
1
-
-
BOX TYPE MANUAL MESH SCREEN Supply, Installation, Testing and Commissioning of Box Type Manual mesh Screen having following size, made of SS 304 material having round bars of size 9 mm dia. with clear bar opening as specified here below, suitably welded in outer frame of equal Leg SS angle of size 50 mm x 50 mm x 6 mm thick or higher, with intermediate support at required locations, complete as per specs. & shall also including followings: The screen shall be with SS perforated Screening Material Collection Box at bottom end of Screen having size as specified, fabricated from 3 mm thk. SS sheet, screen shall be suitable to slide complete screen through rollers between existing guide channel of MCP 400, embedded/ fixed in wall on both sides of RCC wall up to top of chamber with all necessary hardware, SS nuts, bolts & washers, sacrificial Brass lugs on sides, min. two lifting lugs/hooks & SS lifting chain having intermediate link/chain of 150 mm dia. or suitable higher size at every 1.5 m distance with shackle, etc. complete in all respects and provided with 1 set of cleaning rake with each screen complete as per specification and complete in all respect.
Screen Size: 1000mm (W-or actual chamber width) x 1500mm (H) x 300 mm (D) Screening Box size: 300 mm height with width & depth as per screen Opening: 50 mm x 50 mm sq. opening.
(w/o Guide channel & MS supporting structure)
(Note: Screen suitable for 1000 mm wide screen chamber or to suit site requirement.)
2
-
-
Supply, installation, testing and commissioning of Mechanical Coarse Bar Screen with multiple rake blades, in SS 304 having 75 deg. angle of inclination to horizontal, having 20 mm clear opening between bars of size 10 mm thick and 50 mm depth suitable for installation in screen chamber of about 1.0 m wide X 7.85 m deep with max. 1.1 m LD and screen having clear inside width of min. 600 - 700 mm to suit channel width & with vertical bar height of 3.0 m, along with electrical control panel suitable for auto-manual operation, screening disposal arrangement up to ground level to drop on belt conveyor with all accessories & SS hardware’s, etc. as per tender drawing & Specification & complete in all respect.
Rakes shall be provided for every 1.5 to 2.0 m screen channel depth. The chain shall have a breaking load of min. 90 kN.
2
-
-
BELT CONVEYOR SITC of Belt coveyer shall be with sufficient length to cover Two screen chamber, approx. 4.0 m long X 600 mm wide & height as required.
1
-
-
SINGLE GIRDER EOT CRANE:
SITC of Single girder type E.O.T. crane with electrically operated hoist, class II duty, geared travelling trolly with lift as specified here below complete with long travel rail track (40 sq.mm. bar), moving or cross girder, all three motions electrically operated by suitable rating motor IP54, control panel, & down pendant control block, brake, safety device, cables from motor to starter panel & other required accessoaries & manufactured and tested as per IS-807, IS-3938 & IS-3177, class-II, complete as per IS & Specifications. Capacity: 2 Ton, (at Pump House)
Lift: 15.0 m or (or as per site)
Span: App.5.5 m (or as per site)
Bay length: App. 38 m (or as per site)
Note: Minimum as specified capacity or higher as per requirement such that EOT crane capacity is min.1.25 times of the pump /motor OR single heaviest component to be lifted within pump house.
1
-
-
MONORAIL EOT WITH ELECTRIC CHAIN HOIST
Supply, installation, testing & commissioning of Electrically Operated Chain Hoist & Electrically operated Trolley, suitable to operate on Mono Rail Girder having motorised motion in vertical lifting & cross travel, manufactured as per IS:6547-1972-Class-II & IS-3177- Class-II, complete with electrically operated chain hoist & Electically operated geared trolley, brake, chain-gear, motors, safety device, pendant push button, starter panel, cables from motor to starter panel and all other required accessories like limit switches, panel, power supply system (Fastoon cable type), fasteners, epoxy painting, etc. tested for over load as per IS complete as per specifications and complete in all respect.
Capacity : 1 Ton. Min. (For Manual mesh Screen)
'Lift : 11.00 m as mini. or as per site req. Bay Length : 6 m min. or as per site req. (w/o MONORAIL GIRDER & MS supporting structure)
1
-
-
PORTABLE DEWATERING / DESILTING PUMP
Supply and testing of Submersible non clog Portable Dewatering Pumpset with C.I. casing & CF8M impeller, 30 m flexible PVC delivery hose pipe of pump delivery size, rated for 6.0 kg / cm2 presure, 15 mtr SS lifting chain, 20m pair of cable for motor to starter panel, suitable for 3Phase, 415 V, 50 Hz AC supply and min. motor rating as indicated here below, Switch-Starter panel with PMU suitable inter lock for winding protection, moisture controller for fault detection and auto stop facility, with buit-in level switch for dry run protection and auto stop facility, 20 m suitable size power supply cable to starter panel, GI/CI pump stool and other required accessories for wet well. Capacity : 25 m3 / hr.
Head : 20 m
Motor Rating: Mini. 5.5 kW (or higher rating as reco. by pump manufacturer)
1
-
-
Providing, Supply of Structure Steel at site of work with freight, loading, unloading carting, etc. including all taxes and duties complete such as joints, channels, angles, Iron Rails, ISA/ISMC/ISMB/MS flat, Plates, Chequered plates (below 10mm thickness) for cable trench etc. required for support structure of all Electro-mechanical equipment, piping, etc. for support on floor / wall / beam / brackets etc. as per tender and IS.
3000
-
-
Labour Charges for lowering, laying, Fixing with fabrication various size section of MS such as joints, channels, angles, Iron Rails, ISA/ISMC/ISMB/MS flat, Plates, Chequered plates, for cable trench etc Complete with two coats of red oxide and two coats of approved colour shade of epoxy paint as per relevant IS and as per specification.
3000
-
-
BIOLOGICAL TYPE ODOUR CONTROL SYSTEM SITC of Biological Type Odour Control System for SPS shall be provided as per Specification & complete the work in all respects, satisfactory operation of Odour Control System.
1
-
-
ELECTRICAL WORK
TPN MCCB (For LT Service Obtaining Requirement)
SITC of 250A TPN microprocessor MCCB (50kA) with O/L, S/C & E/F protection with Extended rotary handle, Terminal spreader, Auxiliary change over & Trip contact, with Outdoor Enclosure with canopy 2mm thick , Single/double door & Wall mounted/ stand mounted as per site requirement (with incoming & outgoing cable entry at bottom )with Cable end boxes with RYB indicating lamp, Digital voltmeter, VSS, ON,OFF & Trip indicating lamp etc as per Power supply company requirements & location. (Wall mounted at Location as per PSC req.)
1
-
-
MEDIUM VOLTAGE PANEL BOARD (PMCC /APFC)
SITC of PMCC Panel (50kA), compartmentalized, floor mounted, operating height maximum 1800/1900 mm, Extensible on both ends, suitable for Manual & Auto operation -Local & through PLC/SCADA operation as per site conditions complete in all respects as per Tender SLD / Specification / IS and including following as minimum:
(1) One no. FP 250A Microprocessor MCCB (50kA), LSIG for I/c with Digital Voltmeter, Voltmeter selector switch, Digital Ammeter, Ammeter selector switch, MFM with RS-485 of Class-0.5, Indicating lamps R,Y,B,On,off,Trip, 3nos. 250A/5A, Cl.-0.5 metering CT, CL 0.5 CT for APFC relay etc. Constant voltage/control voltage transformer 1500VA, 415V/230V AC, with tapping +/-5% in steps of 2.5%, 16A DP MCB.
(2) 250A TPN Main busbars. (main busbars size with current density 0.8A/Sq.mm)
(3)30 KW STAR -DELTA STARTER FEEDER: 2 NOS:
30 KW or higher rating as per motor vendor Star-delta starter with 125A TPN Thermal magnetic MCCB with Adjustable O/L & Adjustable S/C protection, 95A AC3 duty contactors (3 Nos), O/L Relay, star-delta timer, PMU, CT, ASS, Ammeter, Auto-Manual, Local Remote Selector Switch, MPR with RS-485, ON, OFF, TRIP Indication & pushbutton etc. for S/D starter. complete in all respects. (4)37 KW STAR -DELTA STARTER FEEDER: 2 NOS:
37 KW or higher rating as per motor vendor Star-delta starter with 160A TPN Thermal magnetic MCCB with Adjustable O/L & Adjustable S/C protection, 95A AC3 duty contactors (3 Nos), O/L Relay, star-delta timer, PMU, CT, MFM with RS-485, Auto-Manual, Local Remote Selector Switch, MPR with RS-485, ON, OFF, TRIP Indication & pushbutton etc. for S/D starter. complete in all respects. (5) 60 KVAR APFC POWER FEEDER: 1 NO.
Each feeder comprising of 160A TPN Thermal Magnetic (TM) MCCB with Digital Ammeter, ASS, CT, Indicating lamp, etc.complete in all respects.
(6) 32A TPN TM MCCB FEEDER : 3 Nos.(1 no. for screen panel, 1 no. for MOG PDB, 1no. spare)
Each feeder comprising of 32A TPN Thermal Magnetic (TM) MCCB, with indicating lamp etc. (7) 63A TPN TM MCCB FEEDER FOR ALL MCB FEEDERS: 1 set: Incomer: 63A TPN Thermal Magnetic (TM) MCCB, with indicating lamp etc. 7.1) 7 nos. 32A 'C' curve 4P MCB feeders (for 1no. Ind LDB, 1 no. for EOT crane, 1 no, for EOT with ECH, 1 no for portable dewatering pump, 2 nos. spare, 1 no for ICP/ PLC panel) 7.2) 1 nos. 32A 'C' curve 4P MCB with Time switch,32A contactor 4P,ON lamp feeders (for Outdoor LDB)
7.3) 2 nos. 16A DP MCB feeders (for 2 nos. Spare.) (8) Multiplication relay as required for dry run protection of pumps. NOTE: 1). All MCCB shall be 50KA, Ics = 100% Icu, inbuilt protection with adj O/L and Adj.S/c (LSIG for MP MCCB), Extended rotary handle, Terminal spreader,Auxiliary Change over contact and trip contact as required. 2) All MFM, ACB, Soft Starter,MPR,Temp.Scanner etc shall be with inbuilt RS 485.
1
-
-
SITC of 60 KVAR at 415V, APFC Panel,compartmentalised, floor mounted, extensible type on both sides with Horizontal bus bar arrangement as per site requirement & complete in all respects as per SLD / Specification / IS and including following as minimum:
(1) INCOMER: 1.1 160A MCCB 50 KA, TPN, TM release,Voltmeter, VSS, Ammeter, ASS, resin cast CT, Cl 1.0, 10VA, Indicating lamps, A/M switch etc.
1.2 Microprocessor based APFC Relay,144sq.mm, 8 STEP with RS 485 with minimum operating current 10mA.
2. OUTGOING CAPACITOR FEEDER:
Capacitor feeder of following rating comprising of TPN MCCB/MCB, Capacitor duty contactor, 415V Heavy duty MPP / gas filled capacitor unit, A/M Switch, ON Delay timer,ON / OFF Push button, ON Indication lamp etc. as per Tender SLD& Specification 2.1 20 KVAR FEEDER: 2 NOS
2.2 10 KVAR FEEDER: 1 NOS 2.3 5 KVAR FEEDER: 2 NOS
2.4.Two nos. Vacant feeder suitable for 1-20 KVAr and 1-10KVAr to be provided.
NOTE: 1. Heavy duty 8" cooling/exhaust fan : 2 nos Minimum or higher as required at the top of the panel with canopy/hood.
1
-
-
SITC of Lighting Distribution Board as under:
3 Phase 4 Wire TPN, Prewired LDB (for Indoor & Outdoor Lighting) Suitable to house :
Incoming: 32A FP, ELMCB (30mA)
Outgoing: 20A SP MCB (9 nos.) & 6A SP MCB (9 nos.)
(At Panel Room)
2
-
-
3 Phase 4 Wire TPN, 8 way Pre-wired-MOG PDB for Auxiliary accessories Load power supply (For MOG, rest spare)
Incoming: 63A 4P, MCB 'C' Curve
Outgoing: 8 nos. 32A 4P MCB 'C' Curve
1
-
-
SITC of LCS pushbutton station ON & OFF (E-stop) set complete with Enclosure, necessary mounting/ fixing arrangement on wall / pipe support etc. to be installed near motors for remote operation, etc. as per IS and specifications. (including structural steel) (For 4 nos. for Pump )
4
-
-
LOW VOLTAGE (LT) CABLES Supply, laying, testing and commissioning of 1.1 kV, A2XFY(X)/2XWY(X) XLPE insulated (IS 7098) Al. / Cu stranded conductor, Extruded innersheath cables as per specification & IS. The cable when laid outside the building shall be laid underground in excavated trench, as per specified method and shall be laid in prepared trench/ on cable tray when laid inside the building. 3.5C x 240 sq. mm. A2XFY(X) Cable (1 run for MCCB to PMCC panel)
40
-
-
3.5C x 95 sq. mm. A2XFY Cable (1 run from PMCC panel to 1 no. APFC Panel)
25
-
-
4C x 10 sq. mm. A2XFY (X) Cable (For 1 no MOG PDB )
25
-
-
4C x 6 sq. mm. A2XFY Cable (For Mechanical Screen panel, WR-DB with TPN MCB at Pump House, Indoor LDB, Outdoor LDB, for 6 nos. street light )
260
-
-
4C x 2.5 sq. mm. 2XWY/2XFY Cable (For TPN MCB for Elect. Hoist at Pump House, for EOT with ECH, for Portable dewatering pump, for 2 nos. mech screen & belt conveyor, 6 nos MOG & PLC panel)
250
-
-
Supply of 5C x 1.5 sq.mm. 2XWY(X) Cable (For 4 nos. Pump LCS)
100
-
-
Single core 95sq. mm. PVC insulated circular unsheathed copper conductor flexible Cable (For Power supply Metering Panel to I/c MCCB Unit)
30
-
-
CABLE END TERMINATION AND CONNECTION:
SITC of Double compression weather proof type Ni-plated brass cable glands and crimping type Bimetallic lugs / sockets with necessary tools and equipments as specified in specifications and IS. The glands and lugs / sockets shall be suitable for cable size and type mentioned below & as per specifications.
1) Earthing the glands and armouring with earthing clamp and jumper and also connecting to common earth bar.
2) The job also includes, if necessary, supply & fixing of extension busbar of same material on MCCB or panel board terminal / connector to connect more than one no. of parallel cables or to connect higher size cable to lower size unit. The job also includes earthing the glands and armour of the cable with common earth bar or flexible copper mesh.(Cable termination qty. shall be as per site requirement) 3.5C x 240 sq. mm. A2XFY(X) Cable (1 run for MCCB to PMCC panel)
2
-
-
3.5C x 95 sq. mm. A2XFY Cable (1 run from PMCC panel to APFC Panel)
2
-
-
4C x 10 sq. mm. A2XFY (X) Cable (For 1 no MOG PDB )
2
-
-
4C x 6 sq. mm. A2XFY Cable (For Mechanical Screen panel, WR-DB with TPN MCB at Pump House, Indoor LDB, Outdoor LDB, for 6 nos. street light )
20
-
-
4C x 2.5 sq. mm. 2XWY/2XFY Cable (For TPN MCB for Elect. Hoist at Pump House, for EOT with ECH, for Portable dewatering pump, for 2 nos. mech screen & belt conveyor, 6 nos MOG & PLC panel)
26
-
-
5C x 1.5 sq.mm. 2XWY(X) Cable (For 4 nos. Pump LCS)
8
-
-
Single core 95sq. mm. PVC insulated circular unsheathed copper conductor flexible Cable (For Power supply Metering Panel to I/c MCCB Unit)
10
-
-
CABLE TRAY
SITC of G.I. Ladder/ Perforated type with top cover medium duty (2mm thick) Cable Tray with necessary bends, tees, coupler plate and clamps for fixing. All material shall be Hot dip galvanised as per Specification.
300 x 100 mm - Ladder type
20
-
-
150 x 50 mm - Ladder type
80
-
-
Cable Trench, Laying & Installation of Cable: Making cable trench in soft soil of suitable width of 90cms deep for laying cable, Sand cushioning and brick protection on sides and on top all over the run and back filling the same and making the surface as normal ground as per IS & Specification. (For laying of LT cable in ground)
100
-
-
CHEMICAL EARTHING SYSTEM
SITC of Maintenance free chemical earthing (copper) with earthpit of minimum bore size dia. 225mm Safe Earthing Electrode consisting Pipe-in-Pipe Technology as per IS-3043:1987 /Tech spec. made of corrosion free Pipes having Outer pipe dia of 48 mm having 250 Micron copper plating, Inner corrosion free Hot dip galvanised (80 to 100 micron) pipe dia of 26 mm with copper flat strip type connection terminal 14mm dia with constant ohmic value surrounded by highly conductive corrosion resistant chemical compound with high charge dissipation suitable for electrical installation & of 3Mtr. length of Pipe with two nos. 25Kg. bag of Back filling compound.. (2 nos for ICP/PLC Earthing ) NOTE: Earthing Resistance value & date shall be painted on the chamber cover.
2
-
-
SITC of Maintenance free chemical earthing with earthpit of minimum bore size dia. 225mm Safe Earthing Electrode consisting Pipe-in-Pipe Technology as per IS-3043:1987 /Tech spec. made of corrosion free Hot dip Galvanised (min 150 Microns) Pipes having Outer pipe dia of 76 mm , Inner corrosion free Hot dip galvanised (80 to 100 micron) pipe dia of 26 mm with copper flat strip type connection terminal 14mm dia with constant ohmic value surrounded by highly conductive corrosion resistant chemical compound with high charge dissipation suitable for electrical installation & 3Mtr. length of Pipe with two nos. 25Kg. bag of Back filling compound. (2nos. for PMCC panel & all elect. Equipments)
NOTE: Earthing Resistance value & date shall be painted on the chamber cover.
4
-
-
SITC of pipe type earthing having 150 cms long and 2.5cms dia. Galvanised iron pipe with coupling and buch buried in specially prepared earth pit complete with necessary 8 SWG earth wire (For 2nos.Gate light, 6 nos for street light)
7
-
-
SITC of 50mm(w) x 6mm(T) etc. sizes as required, HOT dip galvanized GI Strip including supply & fixing using GI spacers, saddles when laid inside the building and inclusive of excavation & refilling of earth when laid outside the building & interconnection with earth pit & all electro-mechanical equipments. (50X6 G.I Strip wt.2.3 kg/m, 2.3x100Mt.=230kg.)
230
-
-
Supply, laying and erection of 25mm(w) x 3mm(T) etc. sizes as required, HOT dip galvanized GI Strip including supply & fixing using GI spacers, saddles when laid inside the building and inclusive of excavation & refilling of earth when laid outside the building & interconnection with earth pit & all electro-mechanical equipments. (25X3 G.I Strip, 0.6 Kg/m, 0.6x50Mt.=30Kg.)
30
-
-
Supply, laying and erection of 25mm(w) x 3mm(T) etc. sizes Copper Strip including supply & fixing of bolts, saddles when laid inside the building and inclusive of excavation & refilling of earth when laid outside the building & interconnection with earth pit & PLC panel. (25 X3 Cu. Strip, 0.761 Kg/m, 0.761 x 20mtr.=15.22Kg.)
Copper Bolt,Nuts ,Washers shall be used for Connecting Earth electrode to individual eqp. Bitumen shall be used at the place of joint/welding. (PLC panel to Earthing)
15
-
-
SITC of HOT Dip Galvanized iron strip wire 8 SWG (For LDB, LCS, etc.) (8 SWG G.I Strip, 0.103 Kg/m, 0.103 x 100Mt.=10)
10
-
-
INTERNAL WIRING
SITC of Mains & outlet points wiring with 1.1 kV grade FRLS PVC insulated ISI marked flexible stranded copper conductor wires with medium class min. 25mm. dia. Rigid PVC pipe and accessories to be erected concealed in / to be run on surface / wall / ceiling with following sizes as mentioned below. The unit rate wirings shall be with connector, PVC junction box, wires, holder, ceiling rose, angle holder, switch, sockets, switch board, brass chromium / cadmium plated machine screws, phase and neutral wires, green Earth continuity wires etc. as required to complete wiring from LDB panel to the final outlet termination points. The wiring shall be as per IS:732, IS:4648 and as per tender specification / IS. Mains wiring with 3 wire 1.5 sq.mm.
60
-
-
Mains wiring with 3 wire 2.5 sq.mm
40
-
-
Mains wiring with 4 wire 1.5 sq.mm
40
-
-
Mains wiring with 4 wire 2.5 sq.mm
40
-
-
SITC of Point wiring for Light / fan / Bell / Primary Point with 2nos. 1.5 sq. mm & earth wire of 1.5 sq. mm (green) both are of ISI marked 1.1 kv grade FRLS PVC insulated multistrand copper wires, pipe to be erected concealed in flushed on wall / ceiling, complete with 6A Tissino Type ISI marked flush type switch / bell push & accessories erected on metal / PVC Box covered with 3 mm thick PC (Polycarbonate) / Acrylic sheet with necessary lamp holder / ceiling Rose / H. D. connector as directed with medium class Rigid PVC pipe & accessories.
25
-
-
SITC of 6A independent Plug with 2nos. 1.5 sq.mm Cu. Mains size wiring & earthwire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires with medium class Rigid PVC pipe and accessories to be erected on wall / ceiling, complete with ISI marked 3 / 5 Pin socket and tissino type switch erected with earth continuity connection erected on Metal / PVC box covered with 3 mm thick PC(Polycarbonet) / Acrylic sheet. (2no. for LT Room, 2 nos for pump house, 2 nos for office)
6
-
-
SITC of 6/16A independent Plug with 2nos. 4 sq.mm Cu. Mains size wiring & earthwire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires with medium class Rigid PVC pipe and accessories to be erected on wall / ceiling, complete with ISI marked 3 / 5 Pin socket and tissino type switch erected with earth continuity connection erected on Metal / PVC box covered with 3 mm thick PC(Polycarbonet) / Acrylic sheet. (For 2nos. LT Room, 2 nos for pump house, 2 nos for office)
6
-
-
SITC of Single Phase 20A 3 Pin Metal clad Industrial Type Socket with plug top and 20A SPMCB, suitable for flush mounting, in 16 SWG MS box of suitable size and covered with 3 mm thick electrical grade hylam sheet or equivalent ISI marked Electrical grade Bakelite sheet and earthing with 2.5 sq.mm insulated copper wire run inside the conduit including interconnections etc. complete as required. (1no.for LT Room,1 no for Pump House)
2
-
-
SITC of Sheets steel powder coated weather proof enclosure suitable for as well as with incorporating One no. 32A, 415V MCB Four Pole for Motor & Inductive load (C Curve) having 10 KA breaking capacity & confirms to IS: 8828. (For 1 no WR DB at pump house, 1 no EOT crane at pump house, 1no for portable dewatering pump, 1 no for EOT with ECH )
4
-
-
LED LIGHT FIXTURES & LIGHTING:
SITC of Indoor wall mounting 20Watt or up to 25% higher wattage LED 4 feet Tube Light indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA polyester powder coated and high U.V. & corrosion resistance with diffuser and/or Polycarbonate optics with company mark/name 120 to 300 V,Power Factor more than 0.9, THD 20 %,
CCT 4000 K to 6500K, Uniformity ratio 0.7,
Luminaire efficacy 85 lumens/watt ,
LED driver efficiency 85 %
(Each fitting required LM-79 & LM-80 Certificates)
Tube Light with integral / non-integral driver, Surge-4KV,IP-20, 4 feet, Cat-III (For 2 nos. for office, 6 nos. at LT room, 4 nos. at Pump House, 1 no at toilet)
13
-
-
SITC of 3 watts LED Lamps integral type,cool white with PC diffuser suitable for B22 LAMP holder (For 1no. At office, 1 no. at LT Room, 1 no. at Pump house).
3
-
-
SITC of 40W LED Surface / Wall mounted LED Flood Light fittings with High power White LEDs wattage of 1Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses with company mark/name engraved or embossed 120 to 300 V,Power Factor more than 0.95, THD 20 %, CCT 5000 K to 5700K,
Uniformity ratio 0.45, Luminaire efficacy 85 lumens/watt . LED driver efficiency 85 %.
( Each fittings required LM-79 & LM-80 certificates) (IP-65), Surge -4KV Cat-III For Indoor use: (2 nos. at Pump House)
2
-
-
SITC of 'B' class galvanised iron pipe 32 mm outside dia 45 cms long duly welded on 20 cms x 20 cms x 3 mm thick M.S. base plate, erected on wall or corner for mounting luminaries with necessary hardware materials duly painted for wall mounting indoor flood light fixtures on Wall of Buildings & post top lantern.
9
-
-
1200mm sweep ceiling fan, capacitor type, having double ball bearing 450mm down rod, canopies, shackle, rubber bush, blades, electronic speed regulator, suitable to operate on 230V,50Hz AC supply conforming to IS: 374/1979.Fan shall be painted with white colour.(1 nos. at office & 1 no. at LT Room)
2
-
-
EXTERNAL LIGHTING (Flood LIGHT):
SITC of 70W LED Wall mounted LED Flood Light fittings with High power White LEDs wattage of 1Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses with company mark/name engraved or embossed 120 to 300 V,Power Factor more than 0.95, THD 20 %, CCT 5000 K to 5700K,
Uniformity ratio 0.45, Luminaire efficacy 85 lumens/watt . LED driver efficiency 85 %.
( Each fittings required LM-79 & LM-80 certificates) (IP-65), Surge -4KV Cat-III For Outdoor use: (5 nos. for area lighting)
5
-
-
SITC of 40watt, Cat-III Post Top Lantern LED fitting comprises of 650 MM TOP Diameter, 120 degree beam angle with 3 Nos. Supporting Ribs and with 0.5mt. G.I. fitting pipe (for Gate light)
2
-
-
EXTERNAL LIGHTING (STREET LIGHT):
SITC of Street Light Pole, steel tubular swaged type, 7.5 meter long with single arm & M.S.base plate with pipe cap and over hung 1.5 m long having dia to suit the socket of 240V LED street light fixtures. Street light pole unit rate shall be with (i) IP 65 SMC box of size 20 x 15 x 15 cms. with MCB & terminal strip inside the box with hinged/sliding door (ii) 50mm dia, B class GI pipe bracket min.1.5mtr long for Incoming & outgoing cable (iii)MS Cable Clamp of 25 x 3mm (iv)SITC of 1.5 Mtr.single Arm bracket of medium duty MS pipe of 4.2 cms. Out side dia complete with suitable sleeve tubing 45 cms. long of required size of pole top etc. and having spread of 1.5.mtr. length with 110 deg.(v) Complete painted with one coat of Red oxide / PU base primer and two coats of Aluminium / PU paint for Pole,Arm, pipe etc.
6
-
-
SITC of 70W LED Street light fittings with High power White LEDs wattage of 1Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses with company mark/name engraved or embossed 120 to 300 V,Power Factor more than 0.95, THD 20 %, CCT 5000 K to 5700K,
Uniformity ratio 0.45, Luminaire efficacy 85 lumens/watt . LED driver efficiency 85 %.
( Each fittings required LM-79 & LM-80 certificates) Street Light (IP-65), Surge -4KV, 70 watt Cat-III
6
-
-
SITC of M-20 / 1:2:4 cement concrete foundation for Street light pole & 70 % PCC from bottom including excavation for the pole of size 60 x 60 x 120 cms. Deep in below ground level with plinth of 45 cms x 45 cms(or 45 cms dia x 45 cms) high upper ground level with necessary curing and finishing in approved manner.
6
-
-
SAFETY ACCESSORIES
SITC of following safety accessories complete with necessary fixing brackets, other accessories and tools etc. as required to complete the job.
Supply & Erecting carbon dioxide (CO2) fire extinguisher of 6.5kg capacity with necessary clamps made from 50 x 6 mm M.S. Flat with nut & bolts grouted in wall complete. ( 1no. for LT Room)
1
-
-
Supplying of standard first AID box with antiseptic cream, medicine for use on wounds due burn, crepe bandage, guage bandage, medicated ready to use bandage (Band-aid) adhesive tape for medicinal user, scissors, antiseptic solution (Savlon or similar) etc. (All above contents shall be of standard makes) ( 1no. For LT Room)
1
-
-
Supply & fixing of printed instruction (First Aid) Chart both in English and Gujarati and duly framed with front glasses, for treatment of person suffering from electric shock. (1 no. For LT Room)
1
-
-
Supply and fixing of 20 W fluorescent lamp operated emergency light with maintenance free battery for 3 hours operation during mains power failure. (for 1no. LT Room)
1
-
-
Supply and laying of Synthetic Insulating Mat of Class - A of min. thickness 2mm as per IS:15652 and with good electrical insulation property for 1.1KV/3.3KV as per site requirement. (for LT Panel)
8
-
-
Providing pair of rubber hand gloves ISI make suitable for working on 22 KV supply
1
-
-
LIASONING CHARGES FOR OBTAINING NOC
Power Liasoning Charges for obtaining N.O.C from Electrical Inspector / Statutory authority for Power / Ele. Installation. (Fees shall be paid by tenderer for obtaining N.O.C. from Electrical Inspector / Statutory authority on behalf of client and shall be reimbursed on submission of original receipt to Client).
Liasoning Charges shall include preparing required attested documents & drawing for obtaining NOC on behalf of client (Applicable Fees / deposits shall be reimbursed by Client).
1
-
-
INSTRUMENTATION WORK
PRESSURE MEASURING SYSTEM
Supply, installation, testing & commissioning of Diaphragm Type pressure guage having 150 mm dial with necessary fittings/accessories in SS 316, manifold valve, snubber, nipples etc. complete.
Range : 0 - 1.2 Kg/cm2 (at pump's delivery side)
4
-
-
LEVEL MEASURING SYSTEM
Supply, installation, testing and commissioning of Diff. Ultrasonic Level Transmitter along with all mounting accessories, hardware, etc. complete in all respects and as per specs & with relay output for autu operation of screen and having following measurement ranges for liquid (Sewage) application:
Meas. Range: upto 10 m ( for U/S & D/S of Mech. Screen)
2
-
-
Supply, installation, testing and commissioning of Ultrasonic type Level Transmitter along with all mounting accessories, hardware, etc. complete in all respects and as per specs and having following measurement ranges for liquid (Sewage) application:
Meas. Range: upto 10 m ( at both Compartment of Wet Well)
2
-
-
Supply, installation, testing and commissioning of Float Type Level Switch along with 10 mtr cable and WP Junction Box (at both Compartment of wet well for dry run protection of pumps and alarm and at upstream of manual scrreen for high level alarm ) complete in all respects and as per specs.
4
-
-
ELECTRO MAGNETIC FLOWMETER Supply, installation, testing and commissioning of remote type Full Bore Electromagnetic flow meter comprising of IP-68 Sensor, IP-66 remote transmitter with 20 m cable between sensor and transmitter along with all accessories, hardware, etc. The scope also includes necessary connection with header pipe.
Meter size: 350 mm NB
Pipe Size : 500 mm NB
Flow Measurement Range : 180- 900 M3/ hr.
1
-
-
PLC BASED INSTRUMENT CONTROL PANEL
Supply, Installation, Testing & Commissioning of PLC Based Instrument control Panel with 10" color HMI, 4G GPRS Modem for Remote data transmission to concerned STP SCADA / Central SCADA, SIM Card, Communication with MFM at PMCC Panel, Open protocol connectivity along with required Ethernet switch,etc. Instrument Control Panel '(PLC Enclosure / Panel ) with necessary PLC based logic and wiring , Min 1 nos. flow indicator/totalizer, Min. 2 nos. process Indicator, Min 3 no. analog signal multiplier, , Min. 1 kVA UPS (with 30 min backup alongwith filter for harmonic, suitable rating SMF batteries alongwith battery charger, cabling between UPS and battery and all other accessories as per standard), etc. complete in all respects and as per specs PLC having minimum I/O count of 60DI / 24DO / 10AI / 0AO.
All work shall be carrierd out complete in all respects and as per tender specifications.
1
-
-
INSTRUMENT CABLE & ACCESSORIES
Supply, Laying, Installation, Connection, Termination, Testing & Commissioning of Instrument Cables, along with cable glands, lugs, cable trays, required junction boxes, fittings and accessores as per specs. The unit rate shall include. (a) Supply, loading & unloading of the cable at site from store. (b) Shifitng of cable from site store to place of installation. (c) Fixing of cable clamps, brackets, supports, route markers etc. where ever required to fix the cables safely. (d) Excavation, back filling and levelling of ground alongwith laying of fine sand, protection bricks and other necessary civil material for laying cables outside the building. POWER CABLE
3C X 1.5sq.mm.
150
-
-
CONTROL CABLE 10C X 1.5sq.mm.
500
-
-
SIGNAL CABLE
1P X 1.5sq.mm.
500
-
-
INSTRUMENT CABLE TRAY G.I. Perorated type cable tray shall be made out of galvanized mild steel sheets of 2 mm thickness with required asccessories . All material shall be Hot dip galvanised as per IS 2629 ( as mentioned in specification and tray hardware shall be in GI.
200 X 25 mm - Perforated type
30
-
-
50 X 25 mm - Perforated type
50
-
-
CABLE END TERMINATION AND CONNECTION : 'Supply, fixing, connection, testing and commissioning of double compression brass cable glands and crimping type Bimetalic lugs / sockets with necessary tools and equipments as specified in specifications and IS complete in all respects. The glands and lugs / sockets shall be suitable for cable size and type mentioned above. The job also includes earthing the glands and armour of the cable with common earth bar or flexible copper mesh as applicable. POWER CABLE
3C X 1.5sq.mm
10
-
-
CONTROL CABLE
10C X 1.5sq.mm
26
-
-
SIGNAL CABLE 1P X 1.5sq.mm.
22
-
-
TOOLS & TEST EQUIPMENTS
Magger of range 0 -1000V
1
-
-
Clipon meter (Battery operated) satisfying the following.
(i)With 0.100 mA, 0-1 A and 0-200 A AC
(ii) With 0-100 mV, 0-3 V, 0-30 V, 0-300 V and 0-1000 V
(iii) Least five (0-100) m.Ohm,(0-1) Ohm, (0-10) Ohm, (0-100) Ohm, (0-1000) Ohm.
(iv) The input impedence shall not be less than one maga ohms for voltage range.
1
-
-
Single Phase Elect. Portable Air blower 1500 RPM
1
-
-
LADDER
Ladder shall be made out of light aluminium allow of good strength. They shall be of step ladder, foldable, self supportig type with sperader of metalic angles or high strength.
3 Meter long
1
-
-
6 Meter long
1
-
-
Steel Office chair
2
-
-
Steel cupboard (6 feet H x 3.5 feet W x 1.0 feet 4 inch D)
1
-
-
ELECTRO-MECHANICAL & INSTRUMENTATION WORKS FOR SEWAGE PUMPING STATION (SPS-03) AT SANATHAL TALAV MECHANICAL WORK
SEWAGE SUBMERSIBLE NON CLOG PUMP-MOTOR SET
Supply, Installation, Testing and Commissioning of Submersible NC Pump-Motor set suitable for sewage application with semi-open or suitable type Impeller & wear Rings in CF8M with CI FG 260 Casing & casing cover, SS 410 shaft & with motor suitable for 3-Phase, 415 V, 50 Hz., AC induction Air filled dry type submersible motor of mini. rating as specified having max. 1500 RPM sync. speed, insulation Class 'F' With temp. rise limited to class B and IP-68 protection.
The scope shall include all required accessories viz. automatic coupling device, SS-304 heavy duty & of suitable size double guide pipes of length to suit the sump height with required supports, SS-304 or suitable stainless steel grade Chain with shackles (shall be with dual hook / shackles of 100mm or suitable higher size at app. every 1.5m C-C distance) & of length as per sump height + min. 3m, Submersible Power & control cable (copper flexible & stranded type conductor of reqd. cores & size for each pump motor set) & length of sump height + min. 10 m long each run with necessary electrical termination connection at junction box / starter panel and RCC foundation blocks for auto coupling & delivery bend & suitable to install pump set in new sump, PMU etc. complete as per IS and Specification and also including in scope any other parts / accessories / fittings required to complete the work in all respects & satisfactory operation of pump set.
Pump Capacity: 50 m3/hr (Pump Type-1), Head: 17 m Motor Rating: Min. 5.5 kW (or higher rating as reco. by pump manufacturer)
Over all Efficiency at Duty: min. 49.0 %
2
-
-
Pump Capacity: 100 m3/hr (Pump Type-2), Head: 17 m Motor Rating: 11.0 kW mini. (or higher rating as reco. by pump manufacturer)
Over all Efficiency at Duty: min. 53.5 %
2
-
-
VALVES
Supply, installation, testing and commissioning of Manually Operated CI Double Flanged, Non Rising Spindle type, Sluice Valve conforming to IS 14846, PN 1.0 with SS 304 seat rings and SS spindle with hot dipped galvanised hardware's, bolts, nuts & washers, gaskets, etc. as per data sheet. Size : 100 mm NB (Manually Operated - On Pump header drain)
1
-
-
Supply, installation, testing and commissioning of DI/CI Double Flanged Manually Operated Non Rising spindle Knife Gate Valves conforming to MSS SP-81 1995, PN 1.0, seat test pr. 6.0 kg/cm2 min. with SS gate, EPDM seal, SS rising spindle with all Stainless steel hardware, gaskets, & handwheel for emergency operation etc. complete as per IS and Specification. Size: 100 mm NB (On delivery of Type-1 pump)
2
-
-
Size : 150 mm NB (On delivery of Type-2 pump)
2
-
-
Size : 250 mm NB (on header after flow meter)
1
-
-
Supply, installation, testing & commissioning of Non slam, flanged, single door, swing type Non Return Valve conforming to IS 5312, Part 1 having pressure rating PN 1.0, having CI body and door, CF8M seat rings alongwith all necessary hardwares and complete as per IS and Specification. Size : 100 mm NB (At Delivery of Type-1 Pump)
2
-
-
Size: 150 mm NB (At Del. of Type - 2 Pump)
2
-
-
Providing, supplying, testing and Commissioning of approved make CI Tempor proof Flanged Air Valve with Isolation Sluice Valve as per AWWA / IS 14845 PN-1.0 & IS-14846 PN-1.0 respectively with SS304 float, gun metal nozzle, complete hardware's, bolts, nuts & washers, gaskets etc. including all taxes, Insurance, Transportation, freight charges, Inspection charges, loading, unloading, conveyance to departmental stores, stacking, security etc. complete as per IS and Specification. Size: 100 mm NB (On common header- O/S the PH)
1
-
-
Supply, installation, testing and commissioning of Flange ends Expansion Bellow (PN 1.0) as per EJMA standards and as per specs. and complete in all respect.
Size : 100 mm x 300 mm (L) (on Del. of Type-01 pump)
2
-
-
Size: 150 mm x 300 mm (L) (on Del. of Type-02 pump & at header near flow meter)
3
-
-
Size : 250 mm x 300 mm (L) (on header near KGV)
1
-
-
CI PIPES Supply, installation, connection, testing and commissioning of double flanged delivery and header CI pipes conforming to IS 1536 / 1537, Class B with connection and complete in all respect.
Size: 80 mm to 300 mm dia.
2150
-
-
CI FITTINGS & SPECIALS Supply, installation, connection, testing and commissioning of Flanged delivery and header CI Fittings and Specials like 90 deg. Bend, Blind Flanges, Reducer / Enlarger, Duck foot bend, TEE, etc. conforming to IS 1538 and complete in all respect.
Size: 80 mm to 300 mm dia.
900
-
-
MS PIPES & SPECIALS:
Supply, Gas cutting of pipe, Fabrication, welding, Installation, testing and commissioning of MS pipe & Specials, reducer, expander, bend, Y-Joint, TEE etc. conforming to IS 3589 & flanges confirming to IS 6392-PN-1.0, fabricated from MS. plate with necessary supports & anchoring. Pipe fabricated from MS plate. (Excluding supply of flange) Size : 300 mm NB X min. 5.6 mm Thk
1
-
-
Supply, welding , Installation, testing & commissioning of MS flat machined faced flanges confirming to IS 6392 & drilled as per IS-1538 with drilling off centre bolt holes and flange thickness as per PN 1.0 including cutting & welding.
Size : 100 mm NB Drilled (for AV & pump header drain line)
4
-
-
Size : 300 mm NB-Drilled
1
-
-
Size : 100 mm NB-Drilled Blind
1
-
-
Size : 250 mm NB-Drilled Blind
1
-
-
G.I. PIPES & FITTINGS:
Supply, installation, connection with equipments as required, testing and commissioning of GI pipe conforming to IS-1239 , Heavy Duty with coupling, tee, bend, union, elbow, flanges, etc. as all required fittings for connection complete with gaskets, hardware, and required accessories as per IS & Specifications
Size: 50 mm NB
1
-
-
Size : 100 mm NB
10
-
-
Flanged Joints of Pipes, Fittings and Specials:
Supply, Installation, Making of Flanged CI / GI / MS Pipes, Fittings and Specials Joints with all jointing materials, rubber packing, nut bolts, labour etc.for complete connection.
Size: 80 mm dia (or as per actual Type-01 Pump Del. Flange)
2
-
-
Size: 100 mm dia (or as per actual Type-02 Pump Del. Flange)
2
-
-
Size: 100 mm dia
11
-
-
Size: 150 mm dia
15
-
-
Size: 250 mm dia
12
-
-
Size: 300 mm dia
1
-
-
SLUICE GATE
Supply, installation, testing and commissioning of Manually Gear / Electric Actuator Operated C.I. Sluice Gate conforming to AWWA C 501 or IS : 13349 - 1992 Class - 1 with rising spindle, single faced, wall thimble mounted, handwheel, flange back frame, head stock, Spindle with supports brackets having length as specified or to suit site condition, suitable for seating as well as unseating water head, complete in all respect.
Size : 300 mm X 300 mm - Manually Gear Operated - approx. 6.6 m spindle length (on each Inlet & outlet of screen chamber, at Inter compartment wall of sump) - Flush Bottom or suitable Closing
5
-
-
Size : 600 mm X 600 mm- Electric Actuator operated-approx. 6.0 m spindle length (at inlet pipe) - Conventional Bottom Closing
1
-
-
BOX TYPE MANUAL MESH SCREEN Supply, Installation, Testing and Commissioning of Box Type Manual mesh Screen having following size, made of SS 304 material having round bars of size 9 mm dia. with clear bar opening as specified here below, suitably welded in outer frame of equal Leg SS angle of size 50 mm x 50 mm x 6 mm thick or higher, with intermediate support at required locations, complete as per specs. & shall also including followings: The screen shall be with SS perforated Screening Material Collection Box at bottom end of Screen having size as specified, fabricated from 3 mm thk. SS sheet, screen shall be suitable to slide complete screen through rollers between existing guide channel of MCP 400, embedded/ fixed in wall on both sides of RCC wall up to top of chamber with all necessary hardware, SS nuts, bolts & washers, sacrificial Brass lugs on sides, min. two lifting lugs/hooks & SS lifting chain having intermediate link/chain of 150 mm dia. or suitable higher size at every 1.5 m distance with shackle, etc. complete in all respects and provided with 1 set of cleaning rake with each screen complete as per specification and complete in all respect.
Screen Size: 1000mm (W-or actual chamber width) x 1000mm (H) x 300 mm (D) Screening Box size: 300 mm height with width & depth as per screen Opening: 50 mm x 50 mm sq. opening.
(w/o Guide channel & MS supporting structure)
(Note: Screen suitable for 1000 mm wide screen chamber or to suit site requirement.)
2
-
-
MONORAIL EOT WITH ELECTRIC CHAIN HOIST
Supply, installation, testing & commissioning of Electrically Operated Chain Hoist & Electrically operated Trolley, suitable to operate on Mono Rail Girder having motorised motion in vertical lifting & cross travel, manufactured as per IS:6547-1972-Class-II & IS-3177- Class-II, complete with electrically operated chain hoist & Electically operated geared trolley, brake, chain-gear, motors, safety device, pendant push button, starter panel, cables from motor to starter panel and all other required accessories like limit switches, panel, power supply system (Fastoon cable type), fasteners, epoxy painting, etc. tested for over load as per IS complete as per specifications and complete in all respect.
(w/o MONORAIL GIRDER & MS supporting structure)
Note: (1) Minimum as specified capacity or higher as per requirement such that ECH capacity is min.1.25 times of the pump/motor OR single heaviest component to be lifted within pump house. Capacity : 1 Ton. Min. (at Pump House)
'Lift : 12.00 m as mini. or as per site req. Bay Length : 12 m min. or as per site req.
1
-
-
Capacity : 1 Ton. Min. (For Manual mesh Screen)
'Lift : 10.00 m as mini. or as per site req. Bay Length : 5 m min. or as per site req.
1
-
-
PORTABLE DEWATERING / DESILTING PUMP
Supply and testing of Submersible non clog Portable Dewatering Pumpset with C.I. casing & CF8M impeller, 30 m flexible PVC delivery hose pipe of pump delivery size, rated for 6.0 kg / cm2 presure, 15 mtr SS lifting chain, 20m pair of cable for motor to starter panel, suitable for 3Phase, 415 V, 50 Hz AC supply and min. motor rating as indicated here below, Switch-Starter panel with PMU suitable inter lock for winding protection, moisture controller for fault detection and auto stop facility, with buit-in level switch for dry run protection and auto stop facility, 20 m suitable size power supply cable to starter panel, GI/CI pump stool and other required accessories for wet well. Capacity : 10-15 m3 / hr.
Head : 20 m
Motor Rating: Mini. 3.7 kW (or higher rating as reco. by pump mfg.)
1
-
-
Providing, Supply of Structure Steel at site of work with freight, loading, unloading carting, etc. including all taxes and duties complete such as joints, channels, angles, Iron Rails, ISA/ISMC/ISMB/MS flat, Plates, Chequered plates (below 10mm thickness) for cable trench etc. required for support structure of all Electro-mechanical equipment, piping, etc. for support on floor / wall / beam / brackets etc. as per tender and IS.
2000
-
-
Labour Charges for lowering, laying, Fixing with fabrication various size section of MS such as joints, channels, angles, Iron Rails, ISA/ISMC/ISMB/MS flat, Plates, Chequered plates, for cable trench etc Complete with two coats of red oxide and two coats of approved colour shade of epoxy paint as per relevant IS and as per specification.
2000
-
-
BIOLOGICAL TYPE ODOUR CONTROL SYSTEM SITC of Biological Type Odour Control System for SPS shall be provided as per Specification & complete the work in all respects, satisfactory operation of Odour Control System.
1
-
-
ELECTRICAL WORK
TPN MCCB (For LT Service Obtaining Requirement)
SITC of 250A TPN microprocessor MCCB (50kA) with O/L, S/C & E/F protection with Extended rotary handle, Terminal spreader, Auxiliary change over & Trip contact, with Outdoor Enclosure with canopy 2mm thick , Single/double door & Wall mounted/ stand mounted as per site requirement (with incoming & outgoing cable entry at bottom) with Cable end boxes with RYB indicating lamp, Digital voltmeter, VSS, ON,OFF & Trip indicating lamp etc as per Power supply company requirements & location. (Wall mounted at Location as per PSC req.)
1
-
-
MEDIUM VOLTAGE PANEL BOARD (PMCC /APFC)
SITC of PMCC Panel (50kA), compartmentalized, floor mounted, operating height maximum 1800/1900 mm, Extensible on both ends, suitable for Manual & Auto operation -Local & through PLC/SCADA operation as per site conditions complete in all respects as per Tender SLD / Specification / IS and including following as minimum:
(1) One no. FP 250A Microprocessor MCCB (50kA), LSIG for I/c with Digital Voltmeter, Voltmeter selector switch, Digital Ammeter, Ammeter selector switch, MFM with RS-485 of Class-0.5, Indicating lamps R,Y,B,On,off,Trip, 3nos. 250A/5A, Cl.-0.5 metering CT, CL 0.5 CT for APFC relay etc. Constant voltage/control voltage transformer 1500VA, 415V/230V AC, with tapping +/-5% in steps of 2.5%, 16A DP MCB.
(2) 250A TPN Main busbars. (main busbars size with current density 0.8A/Sq.mm)
(3) 5.5 KW DOL STARTER FEEDER: 2 NOS:
5.5 KW or higher rating as per motor vendor DOL starter with TPMPCB, 25A AC3 duty contactors, O/L Relay, PMU, CT, Ammeter, Auto-Manual, Local Remote Selector Switch, ON, OFF, TRIP Indication & pushbutton etc. for DOL starter. complete in all respects. (4) 11 KW STAR -DELTA STARTER FEEDER: 2 NOS:
11 KW or higher rating as per motor vendor Star-delta starter with 63A TPN Thermal magnetic MCCB with Adjustable O/L & Adjustable S/C protection, 50A AC3 duty contactors (3 Nos), O/L Relay, star-delta timer, PMU, CT, Ammeter, Auto-Manual, Local Remote Selector Switch, ON, OFF, TRIP Indication & pushbutton etc. for S/D starter. complete in all respects. (5) 32A TPN TM MCCB FEEDER : 2 Nos.( 1 no. for PDB, 1no. spare)
Each feeder comprising of 32A TPN Thermal Magnetic (TM) MCCB, with indicating lamp etc. (6) 63A TPN TM MCCB FEEDER FOR ALL MCB FEEDERS: 1 set: Incomer: 63A TPN Thermal Magnetic (TM) MCCB, with indicating lamp etc. 6.1) 5 nos. 32A 'C' curve 4P MCB feeders (for 1no. Ind LDB, 1 no for portable dewatering pump, 2 nos. spare, 1 no for ICP/ PLC panel) 6.2) 1 nos. 32A 'C' curve 4P MCB with Time switch,32A contactor 4P,ON lamp feeders (for Outdoor LDB)
6.3) 2 nos. 16A DP MCB feeders (for 2 nos. Spare.) (7) APFC separate cubical compartment (minimum 20 KVAr) having 1no. 63A TPN Thermal magnetic MCCB 50KA with adjustable overload and adjustable short circuit, 6 step APFC relay with RS 485, 1no. 63 A/5A, Cl.-0.5 APFC CT, 1 no 10 kVAR capacitor with 32A TPN D curve MCB, 2 nos 5 kVAR capacitor with 16A TPN D curve MCB with capacitor Duty Contractor A/M switch, On delay timer etc. Complete in all respects as per Specification, IS & SLD.
(8) Multiplication relay as required for dry run protection of pumps. NOTE: 1). All MCCB shall be 50KA, Ics = 100% Icu, inbuilt protection with adj O/L and Adj.S/c (LSIG for MP MCCB), Extended rotary handle, Terminal spreader,Auxiliary Change over contact and trip contact as required. 2) All MFM, ACB, Soft Starter,MPR,Temp.Scanner etc shall be with inbuilt RS 485.
1
-
-
SITC of Lighting Distribution Board as under:
3 Phase 4 Wire TPN, Prewired LDB (for Indoor & Outdoor Lighting) Suitable to house :
Incoming: 32A FP, ELMCB (30mA)
Outgoing: 20A SP MCB (9 nos.) & 6A SP MCB (9 nos.)
(At Panel Room)
2
-
-
3 Phase 4 Wire TPN, 8 way Pre-wired- PDB for Auxiliary accessories Load power supply (For MOG, WR-DB, 1 no. for EOT crane, 1 no, for EOT with ECH, rest spare)
Incoming: 63A 4P, MCB 'C' Curve
Outgoing: 8 nos. 32A 4P MCB 'C' Curve
1
-
-
SITC of LCS pushbutton station ON & OFF (E-stop) set complete with Enclosure, necessary mounting/ fixing arrangement on wall / pipe support etc. to be installed near motors for remote operation, etc. as per IS and specifications. (including structural steel) (For 4 nos. for Pump )
4
-
-
LOW VOLTAGE (LT) CABLES Supply, laying, testing and commissioning of 1.1 kV, A2XFY(X)/2XWY(X) XLPE insulated (IS 7098) Al. / Cu stranded conductor, Extruded innersheath cables as per specification & IS. The cable when laid outside the building shall be laid underground in excavated trench, as per specified method and shall be laid in prepared trench/ on cable tray when laid inside the building.
SITC of 3.5C x 240 sq. mm. A2XFY(X) Cable (1 run for MCCB to PMCC panel)
40
-
-
4C x 10 sq. mm. A2XFY (X) Cable (For 1 no. PDB )
25
-
-
4C x 6 sq. mm. A2XFY Cable (For WR-DB with TPN MCB at Pump House, Indoor LDB, Outdoor LDB, for 4 nos. street light )
180
-
-
4C x 2.5 sq. mm. 2XWY/2XFY Cable (For TPN MCB for Elect. Hoist at Pump House, for EOT with ECH, for Portable dewatering pump, 1 no. MOG & PLC Panel)
110
-
-
Supply of 5C x 1.5 sq.mm. 2XWY(X) Cable (For 4 nos. Pump LCS)
100
-
-
Single core 95sq. mm. PVC insulated circular unsheathed copper conductor flexible Cable (For Power supply Metering Panel to I/c MCCB Unit)
30
-
-
CABLE END TERMINATION AND CONNECTION:
SITC of Double compression weather proof type Ni-plated brass cable glands and crimping type Bimetalic lugs / sockets with necessary tools and equipments as specified in specifications and IS. The glands and lugs / sockets shall be suitable for cable size and type mentioned below & as per specifications.
1) Earthing the glands and armouring with earthing clamp and jumper and also connecting to common earth bar.
2) The job also includes, if necessary, supply & fixing of extension busbar of same material on MCCB or panel board terminal / connector to connect more than one no. of parallel cables or to connect higher size cable to lower size unit. The job also includes earthing the glands and armour of the cable with common earth bar or flexible copper mesh.(Cable termination qty. shall be as per site requirement) 3.5C x 240 sq. mm. A2XFY(X) Cable (1 run for MCCB to PMCC panel)
2
-
-
4C x 10 sq. mm. A2XFY (X) Cable (For 1 no PDB )
2
-
-
4C x 6 sq. mm. A2XFY Cable (For WR-DB with TPN MCB at Pump House, Indoor LDB, Outdoor LDB, for 4 nos. street light )
14
-
-
4C x 2.5 sq. mm. 2XWY/2XFY Cable (For TPN MCB for Elect. Hoist at Pump House, for EOT with ECH, for Portable dewatering pump, 1 no. MOG & PLC Panel)
10
-
-
5C x 1.5 sq.mm. 2XWY(X) Cable (For 4 nos. Pump LCS)
8
-
-
Single core 95sq. mm. PVC insulated circular unsheathed copper conductor flexible Cable (For Power supply Metering Panel to I/c MCCB Unit)
10
-
-
CABLE TRAY
SITC of G.I. Ladder/ Perforated type with top cover medium duty (2mm thick) Cable Tray with necessary bends, tees, coupler plate and clamps for fixing. All material shall be Hot dip galvanised as per Specification.
300 x 100 mm - Ladder type
20
-
-
150 x 50 mm - Ladder type
80
-
-
Cable Trench, Laying & Installation of Cable: Making cable trench in soft soil of suitable width of 90cms deep for laying cable, Sand cushioning and brick protection on sides and on top all over the run and back filling the same and making the surface as normal ground as per IS & Specification. (For laying of LT cable in ground)
100
-
-
CHEMICAL EARTHING SYSTEM
SITC of Maintenance free chemical earthing (copper) with earthpit of minimum bore size dia. 225mm Safe Earthing Electrode consisting Pipe-in-Pipe Technology as per IS-3043:1987 /Tech spec. made of corrosion free Pipes having Outer pipe dia of 48 mm having 250 Micron copper plating, Inner corrosion free Hot dip galvanised (80 to 100 micron) pipe dia of 26 mm with copper flat strip type connection terminal 14mm dia with constant ohmic value surrounded by highly conductive corrosion resistant chemical compound with high charge dissipation suitable for electrical installation & of 3Mtr. length of Pipe with two nos. 25Kg. bag of Back filling compound.. (2 nos for ICP/PLC Earthing ) NOTE: Earthing Resistance value & date shall be painted on the chamber cover.
2
-
-
SITC of Maintenance free chemical earthing with earthpit of minimum bore size dia. 225mm Safe Earthing Electrode consisting Pipe-in-Pipe Technology as per IS-3043:1987 /Tech spec. made of corrosion free Hot dip Galvanised (min 150 Microns) Pipes having Outer pipe dia of 76 mm , Inner corrosion free Hot dip galvanised (80 to 100 micron) pipe dia of 26 mm with copper flat strip type connection terminal 14mm dia with constant ohmic value surrounded by highly conductive corrosion resistant chemical compound with high charge dissipation suitable for electrical installation & 3Mtr. length of Pipe with two nos. 25Kg. bag of Back filling compound. (2nos. for PMCC panel & all elect. Equipments)
NOTE: Earthing Resistance value & date shall be painted on the chamber cover.
4
-
-
SITC of pipe type earthing having 150 cms long and 2.5cms dia. Galvanised iron pipe with coupling and buch buried in specially prepared earth pit complete with necessary 8 SWG earth wire (For 2nos.Gate light, 4 nos for street light)
6
-
-
SITC of 50mm(w) x 6mm(T) etc. sizes as required, HOT dip galvanized GI Strip including supply & fixing using GI spacers, saddles when laid inside the building and inclusive of excavation & refilling of earth when laid outside the building & interconnection with earth pit & all electro-mechanical equipments. (50X6 G.I Strip wt.2.3 kg/m, 2.3x70Mt.=160kg.)
160
-
-
Supply, laying and erection of 25mm(w) x 3mm(T) etc. sizes as required, HOT dip galvanized GI Strip including supply & fixing using GI spacers, saddles when laid inside the building and inclusive of excavation & refilling of earth when laid outside the building & interconnection with earth pit & all electro-mechanical equipments. (25X3 G.I Strip, 0.6 Kg/m, 0.6x50Mt.=30Kg.)
30
-
-
Supply, laying and erection of 25mm(w) x 3mm(T) etc. sizes Copper Strip including supply & fixing of bolts, saddles when laid inside the building and inclusive of excavation & refilling of earth when laid outside the building & interconnection with earth pit & PLC panel. (25 X3 Cu. Strip, 0.761 Kg/m, 0.761 x 20mtr.=15.22Kg.)
Copper Bolt,Nuts ,Washers shall be used for Connecting Earth electrode to individual eqp. Bitumen shall be used at the place of joint/welding. (PLC panel to Earthing)
15
-
-
SITC of HOT Dip Galvanized iron strip wire 8 SWG (For LDB, LCS, etc.) (8 SWG G.I Strip, 0.103 Kg/m, 0.103 x 80Mt.=8)
8
-
-
INTERNAL WIRING
SITC of Mains & outlet points wiring with 1.1 kV grade FRLS PVC insulated ISI marked flexible stranded copper conductor wires with medium class min. 25mm. dia. Rigid PVC pipe and accessories to be erected concealed in / to be run on surface / wall / ceiling with following sizes as mentioned below. The unit rate wirings shall be with connector, PVC junction box, wires, holder, ceiling rose, angle holder, switch, sockets, switch board, brass chromium / cadmium plated machine screws, phase and neutral wires, green Earth continuity wires etc. as required to complete wiring from LDB panel to the final outlet termination points. The wiring shall be as per IS:732, IS:4648 and as per tender specification / IS. Mains wiring with 3 wire 1.5 sq.mm.
50
-
-
Mains wiring with 3 wire 2.5 sq.mm
30
-
-
Mains wiring with 4 wire 1.5 sq.mm
30
-
-
Mains wiring with 4 wire 2.5 sq.mm
30
-
-
SITC of Point wiring for Light / fan / Bell / Primary Point with 2nos. 1.5 sq. mm & earth wire of 1.5 sq. mm (green) both are of ISI marked 1.1 kv grade FRLS PVC insulated multistrand copper wires, pipe to be erected concealed in flushed on wall / ceiling, complete with 6A Tissino Type ISI marked flush type switch / bell push & accessories erected on metal / PVC Box covered with 3 mm thick PC (Polycarbonate) / Acrylic sheet with necessary lamp holder / ceiling Rose / H. D. connector as directed with medium class Rigid PVC pipe & accessories.
20
-
-
SITC of 6A independent Plug with 2nos. 1.5 sq.mm Cu. Mains size wiring & earthwire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires with medium class Rigid PVC pipe and accessories to be erected on wall / ceiling, complete with ISI marked 3 / 5 Pin socket and tissino type switch erected with earth continuity connection erected on Metal / PVC box covered with 3 mm thick PC(Polycarbonet) / Acrylic sheet. (2no. for LT Room, 2 nos for pump house)
4
-
-
SITC of 6/16A independent Plug with 2nos. 4 sq.mm Cu. Mains size wiring & earthwire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires with medium class Rigid PVC pipe and accessories to be erected on wall / ceiling, complete with ISI marked 3 / 5 Pin socket and tissino type switch erected with earth continuity connection erected on Metal / PVC box covered with 3 mm thick PC(Polycarbonet) / Acrylic sheet. (For 2nos. LT Room, 2 nos for pump house)
4
-
-
SITC of Single Phase 20A 3 Pin Metal clad Industrial Type Socket with plug top and 20A SPMCB, suitable for flush mounting, in 16 SWG MS box of suitable size and covered with 3 mm thick electrical grade hylam sheet or equivalent ISI marked Electrical grade Bakelite sheet and earthing with 2.5 sq.mm insulated copper wire run inside the conduit including interconnections etc. complete as required. (1no.for LT Room,1 no for Pump House)
2
-
-
SITC of Sheets steel powder coated weather proof enclosure suitable for as well as with incorporating One no. 32A, 415V MCB Four Pole for Motor & Inductive load (C Curve) having 10 KA breaking capacity & confirms to IS: 8828. (For 1 no WR DB at pump house, 1 no EOT crane at pump house, 1no for portable dewatering pump, 1 no for EOT with ECH )
4
-
-
LED LIGHT FIXTURES & LIGHTING:
SITC of Indoor wall mounting 20Watt or up to 25% higher wattage LED 4 feet Tube Light indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA polyester powder coated and high U.V. & corrosion resistance with diffuser and/or Polycarbonate optics with company mark/name 120 to 300 V,Power Factor more than 0.9, THD 20 %,
CCT 4000 K to 6500K, Uniformity ratio 0.7,
Luminaire efficacy 85 lumens/watt ,
LED driver efficiency 85 %
(Each fitting required LM-79 & LM-80 Certificates)
Tube Light with integral / non-integral driver, Surge-4KV,IP-20, 4 feet, Cat-III (For 6 nos. at LT room, 4 nos. at Pump House)
10
-
-
3 watts LED Lamps integral type,cool white with PC diffuser suitable for B22 LAMP holder (For 1 no. at LT Room, 1 no. at Pump house).
2
-
-
SITC of 40W LED Surface / Wall mounted LED Flood Light fittings with High power White LEDs wattage of 1Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses with company mark/name engraved or embossed 120 to 300 V,Power Factor more than 0.95, THD 20 %, CCT 5000 K to 5700K,
Uniformity ratio 0.45, Luminaire efficacy 85 lumens/watt . LED driver efficiency 85 %.
(Each fittings required LM-79 & LM-80 certificates) (IP-65), Surge -4KV Cat-III For Indoor use: (2 nos. at Pump House)
2
-
-
SITC of 'B' class galvanised iron pipe 32 mm outside dia 45 cms long duly welded on 20 cms x 20 cms x 3 mm thick M.S. base plate, erected on wall or corner for mounting luminaire with necessary hardware materials duly painted for wall mounting indoor flood light fixtures on Wall of Buildings & post top lantern.
9
-
-
1200mm sweep ceiling fan, capacitor type, having double ball bearing 450mm down rod, canopies, shackle, rubber bush, blades, electronic speed regulator, suitable to operate on 230V,50Hz AC supply conforming to IS: 374/1979.Fan shall be painted with white colour.(1 no. at LT Room)
1
-
-
EXTERNAL LIGHTING (Flood LIGHT):
SITC of 70W LED Wall mounted LED Flood Light fittings with High power White LEDs wattage of 1Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses with company mark/name engraved or embossed 120 to 300 V,Power Factor more than 0.95, THD 20 %, CCT 5000 K to 5700K,
Uniformity ratio 0.45, Luminaire efficacy 85 lumens/watt . LED driver efficiency 85 %.
( Each fittings required LM-79 & LM-80 certificates) (IP-65), Surge -4KV Cat-III For Outdoor use: (5 nos. for area lighting)
5
-
-
SITC of 40watt, Cat-III Post Top Lantern LED fitting comprises of 650 MM TOP Diameter, 120 degree beam angle with 3 Nos. Supporting Ribs and with 0.5mt. G.I. fitting pipe (for Gate light)
2
-
-
EXTERNAL LIGHTING (STREET LIGHT):
SITC of Street Light Pole, steel tubular swaged type, 7.5 meter long with single arm & M.S.base plate with pipe cap and over hung 1.5 m long having dia to suit the socket of 240V LED street light fixtures. Street light pole unit rate shall be with (i) IP 65 SMC box of size 20 x 15 x 15 cms. with MCB & terminal strip inside the box with hinged/sliding door (ii) 50mm dia, B class GI pipe bracket min.1.5mtr long for Incoming & outgoing cable (iii)MS Cable Clamp of 25 x 3mm (iv)SITC of 1.5 Mtr.single Arm bracket of medium duty MS pipe of 4.2 cms. Out side dia complete with suitable sleeve tubing 45 cms. long of required size of pole top etc. and having spread of 1.5.mtr. length with 110 deg.(v) Complete painted with one coat of Red oxide / PU base primer and two coats of Aluminium / PU paint for Pole,Arm, pipe etc.
12
-
-
SITC of 70W LED Street light fittings with High power White LEDs wattage of 1Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses with company mark/name engraved or embossed 120 to 300 V,Power Factor more than 0.95, THD 20 %, CCT 5000 K to 5700K,
Uniformity ratio 0.45, Luminaire efficacy 85 lumens/watt . LED driver efficiency 85 %.
( Each fittings required LM-79 & LM-80 certificates) Street Light (IP-65), Surge -4KV, 70 watt Cat-III
12
-
-
SITC of M-20 / 1:2:4 cement concrete foundation for Street light pole & 70 % PCC from bottom including excavation for the pole of size 60 x 60 x 120 cms. Deep in below ground level with plinth of 45 cms x 45 cms(or 45 cms dia x 45 cms) high upper ground level with necessary curing and finishing in approved manner.
12
-
-
SAFETY ACCESSORIES
SITC of following safety accessories complete with necessary fixing brackets, other accessories and tools etc. as required to complete the job.
Supply & Erecting carbon dioxide (CO2) fire extinguisher of 6.5kg capacity with necessary clamps made from 50 x 6 mm M.S. Flat with nut & bolts grouted in wall complete. (1no. for LT Room)
1
-
-
Supplying of standard first AID box with antiseptic cream, medicine for use on wounds due burn, crepe bandage, guage bandage, medicated ready to use bandage (Band-aid) adhesive tape for medicinal user, scissors, antiseptic solution (Savlon or similar) etc. (All above contents shall be of standard makes) (1no. For LT Room)
1
-
-
Supply & fixing of printed instruction (First Aid) Chart both in English and Gujarati and duly framed with front glasses, for treatment of person suffering from electric shock. (1 no. For LT Room)
1
-
-
Supply and fixing of 20 W fluorescent lamp operated emergency light with maintenance free battery for 3 hours operation during mains power failure. (for 1no. LT Room)
1
-
-
Supply and laying of Synthetic Insulating Mat of Class - A of min. thickness 2mm as per IS:15652 and with good electrical insulation property for 1.1KV/3.3KV as per site requirement. (for LT Panel)
8
-
-
Providing pair of rubber hand gloves ISI make suitable for working on 22 KV supply
1
-
-
LIASONING CHARGES FOR OBTAINING NOC
Power Liasoning Charges for obtaining N.O.C from Electrical Inspector / Statutory authority for Power / Ele. Installation. (Fees shall be paid by tenderer for obtaining N.O.C. from Electrical Inspector / Statutory authority on behalf of client and shall be reimbursed on submission of original receipt to Client).
Liasoning Charges shall include preparing required attested documents & drawing for obtaining NOC on behalf of client (Applicable Fees / deposits shall be reimbursed by Client).
1
-
-
INSTRUMENTATION WORK
PRESSURE MEASURING SYSTEM
Supply, installation, testing & commissioning of Diaphragm Type pressure guage having 150 mm dial with necessary fittings/accessories in SS 316, manifold valve, snubber, nipples etc. complete.
Range :0 - 1.6 Kg/cm2 (at pump's delivery side)
4
-
-
LEVEL MEASURING SYSTEM
Supply, installation, testing and commissioning of Ultrasonic type Level Transmitter along with all mounting accessories, hardware, etc. complete in all respects and as per specs and having following measurement ranges for liquid (Sewage) application:
Meas. Range: upto 10 m ( at Wet Well)
1
-
-
Supply, installation, testing and commissioning of Float Type Level Switch along with 10 mtr cable and WP Junction Box (at wet well for dry run protection of pumps and alarm and at upstream of manual scrreen for high level alarm ) complete in all respects and as per specs.
3
-
-
ELECTRO MAGNETIC FLOWMETER Supply, installation, testing and commissioning of remote type Full Bore Electromagnetic flow meter comprising of IP-68 Sensor, IP-66 remote transmitter with 20 m cable between sensor and transmitter along with all accessories, hardware, etc. The scope also includes necessary connection with header pipe.
Meter size:150 mm NB
Pipe Size : 250 mm NB
Flow Measurement Range : 32- 160 m3/ hr.
1
-
-
PLC BASED INSTRUMENT CONTROL PANEL
Supply, Installation, Testing & Commissioning of PLC Based Instrument control Panel with 10" color HMI, 4G GPRS Modem for Remote data transmission to concerned STP SCADA / Central SCADA, SIM Card, Communication with MFM at PMCC Panel, Open protocol connectivity along with required Ethernet switch,etc. Instrument Control Panel '(PLC Enclosure / Panel ) with necessary PLC based logic and wiring , Min 1 nos. flow indicator/totalizer, Min. 1 nos. process Indicator, Min 2 nos. analog signal multiplier, , Min. 1 kVA UPS (with 30 min backup alongwith filter for harmonic, suitable rating SMF batteries alongwith battery charger, cabling between UPS and battery and all other accessories as per standard), etc. complete in all respects and as per specs PLC having minimum I/O count of 24DI / 10DO / 4AI / 0AO.
All work shall be carrierd out complete in all respects and as per tender specifications.
1
-
-
INSTRUMENT CABLE & ACCESSORIES
Supply, Laying, Installation, Connection, Termination, Testing & Commissioning of Instrument Cables, along with cable glands, lugs, cable trays, required junction boxes, fittings and accessores as per specs. The unit rate shall include. (a) Supply, loading & unloading of the cable at site from store. (b) Shifitng of cable from site store to place of installation. (c) Fixing of cable clamps, brackets, supports, route markers etc. where ever required to fix the cables safely. (d) Excavation, back filling and levelling of ground alongwith laying of fine sand, protection bricks and other necessary civil material for laying cables outside the building. POWER CABLE
3C X 1.5sq.mm.
50
-
-
CONTROL CABLE 10C X 1.5sq.mm.
100
-
-
SIGNAL CABLE
1P X 1.5sq.mm.
100
-
-
INSTRUMENT CABLE TRAY G.I. Perorated type cable tray shall be made out of galvanized mild steel sheets of 2 mm thickness with required asccessories . All material shall be Hot dip galvanised as per IS 2629 (as mentioned in specification and tray hardware shall be in GI.
200 X 25 mm - Perforated type
20
-
-
50 X 25 mm - Perforated type
20
-
-
CABLE END TERMINATION AND CONNECTION : 'Supply, fixing, connection, testing and commissioning of double compression brass cable glands and crimping type Bimetalic lugs / sockets with necessary tools and equipments as specified in specifications and IS complete in all respects. The glands and lugs / sockets shall be suitable for cable size and type mentioned above. The job also includes earthing the glands and armour of the cable with common earth bar or flexible copper mesh as applicable. POWER CABLE
3C X 1.5sq.mm
4
-
-
CONTROL CABLE
10C X 1.5sq.mm
10
-
-
SIGNAL CABLE 1P X 1.5sq.mm.
10
-
-
TOOLS & TEST EQUIPMENTS
Magger of range 0 -1000V
1
-
-
Clipon meter (Battery operated) satisfying the following.
(i)With 0.100 mA, 0-1 A and 0-200 A AC
(ii) With 0-100 mV, 0-3 V, 0-30 V, 0-300 V and 0-1000 V
(iii) Least five (0-100) m.Ohm,(0-1) Ohm, (0-10) Ohm, (0-100) Ohm, (0-1000) Ohm.
(iv) The input impedence shall not be less than one maga ohms for voltage range.
1
-
-
Single Phase Elect. Portable Air blower 1500 RPM
1
-
-
LADDER
Ladder shall be made out of light aluminium allow of good strength. They shall be of step ladder, foldable, self supportig type with sperader of metalic angles or high strength.
3 Meter long
1
-
-
6 Meter long
1
-
-
Steel Office chair
2
-
-
Steel cupboard (6 feet H x 3.5 feet W x 1.0 feet 4 inch D)
1
-
-
ELECTRO-MECHANICAL & INSTRUMENTATION WORKS FOR INTERMEDIATE SEWAGE PUMPING STATION (ISPS) AT SANATHAL TALAV MECHANICAL WORK
SEWAGE SUBMERSIBLE NON CLOG PUMP-MOTOR SET
Supply, Installation, Testing and Commissioning of Submersible NC Pump-Motor set suitable for sewage application with semi-open or suitable type Impeller & wear Rings in CF8M with CI FG 260 Casing & casing cover, SS 410 shaft & with motor suitable for 3-Phase, 415 V, 50 Hz., AC induction Air filled dry type submersible motor of mini. rating as specified having max. 1000 RPM sync. speed, insulation Class 'F' With temp. rise limited to class B and IP-68 protection.
The scope shall include all required accessories viz. automatic coupling device, SS-304 heavy duty & of suitable size double guide pipes of length to suit the sump height with required supports, SS-304 or suitable stainless steel grade Chain with shackles (shall be with dual hook / shackles of 300 mm or suitable higher size at app. every 1.5m C-C distance) & of length as per sump height + min. 3m, Submersible Power & control cable (copper flexible & stranded type conductor of reqd. cores & size for each pump motor set) & length of sump height + min. 10 m long each run with necessary electrical termination connection at junction box / starter panel and RCC foundation blocks for auto coupling & delivery bend & suitable to install pump set in new sump, PMU etc. complete as per IS and Specification and also including in scope any other parts / accessories / fittings required to complete the work in all respects & satisfactory operation of pump set.
Pump Capacity: 2230 m3/hr, Head: 30 m, Motor Rating: 275 kW mini. (or higher rating as reco. by pump manufacturer)
Over all Efficiency at Duty: min. 70.0 %
8
-
-
VALVES
Supply, installation, testing and commissioning of Manually Operated CI Double Flanged, Non Rising Spindle type, Sluice Valve conforming to IS 14846, PN 1.0 with SS 304 seat rings and SS spindle with hot dipped galvanised hardware's, bolts, nuts & washers, gaskets, etc. as per data sheet. Size : 200 mm NB (Manually Operated - On both header drain)
2
-
-
Supply, installation, testing and commissioning of DI/CI Double Flanged Electric Actuator Gear Operated Non Rising spindle Knife Gate Valves conforming to MSS SP-81 1995, PN 1.0, seat test pr. 6.0 kg/cm2 min. with SS gate, EPDM seal, SS rising spindle with all Stainless steel hardware, gaskets, & handwheel for emergency operation etc. complete as per IS and Specification. Size: 700 mm NB (On delivery of each pump)
8
-
-
Size : 1200 mm NB (on both header after flow meter)
2
-
-
Supply, installation, testing & commissioning of Non slam, flanged, Multi door, swing type Non Return Valve conforming to IS 5312, Part 2 having pressure rating PN 1.0, having C.I. body and doors, CF8M seat rings alongwith all necessary hardwares, bolts, nuts & washers, gaskets, etc. as per specification and complete in all respect.
Size: 700 mm NB (At Delivery of each Pump)
8
-
-
Providing, supplying, testing and Commissioning of approved make CI Tempor proof Flanged Air Valve with Isolation Sluice Valve as per AWWA / IS 14845 PN-1.0 & IS-14846 PN-1.0 respectively with SS304 float, gun metal nozzle, complete hardware's, bolts, nuts & washers, gaskets etc. including all taxes, Insurance, Transportation, freight charges, Inspection charges, loading, unloading, conveyance to departmental stores, stacking, security etc. complete as per IS and Specification. Size: 200 mm NB (On both header after KGV)
2
-
-
Supply, installation, testing and commissioning of Flange ends Expansion Bellow (PN 1.0) as per EJMA standards and as per specs. and complete in all respect.
Size: 700 mm x 300 mm (L) (on Del. of each pump)
8
-
-
Size: 1200 mm x 300 mm (L) (On both header near KGV)
2
-
-
CI PIPES Supply, installation, connection, testing and commissioning of double flanged delivery and header CI pipes conforming to IS 1536 / 1537, Class B with connection and complete in all respect.
Size: 700 mm dia. & above
50200
-
-
CI FITTINGS & SPECIALS Supply, installation, connection, testing and commissioning of Flanged delivery and header CI Fittings and Specials like 90 deg. Bend, Blind Flanges, Reducer / Enlarger, Duck foot bend, TEE, etc. conforming to IS 1538 and complete in all respect.
Size: 700 mm dia. & above
8500
-
-
MS PIPES & SPECIALS:
Supply, Gas cutting of pipe, Fabrication, welding, Installation, testing and commissioning of MS pipe & Specials, reducer, expander, bend, Y-Joint, TEE etc. conforming to IS 3589 & flanges confirming to IS 6392-PN-1.0, fabricated from MS. plate with necessary supports & anchoring. Pipe fabricated from MS plate. (Excluding supply of flange) Size: 200 mm NB x 6.3 mm Thk (For header drain line & for Air Valve)
12
-
-
Size : 700 mm NB X min. 8.0 mm Thk
12
-
-
Size : 1200 mm NB X min. 10.0 mm Thk
80
-
-
Size : 1400 mm NB X min. 12.5 mm Thk
10
-
-
Supply, welding , Installation, testing & commissioning of MS flat machined faced flanges confirming to IS 6392 & drilled as per IS-1538 with drilling off centre bolt holes and flange thickness as per PN 1.0 including cutting & welding.
Size : 200 mm NB Drilled (for Air Valve & subm. pump header drain line)
8
-
-
Size : 700 mm NB-Drilled
8
-
-
Size : 1200 mm NB-Drilled
10
-
-
Size : 200 mm NB-Drilled Blind
2
-
-
Size : 1200 mm NB-Drilled Blind
2
-
-
G.I. PIPES & FITTINGS:
Supply, installation, connection with equipments as required, testing and commissioning of GI pipe conforming to IS-1239 , Heavy Duty with coupling, tee, bend, union, elbow, flanges, etc. as all required fittings for connection complete with gaskets, hardware, and required accessories as per IS & Specifications
Size: 50 mm NB
10
-
-
Flanged Joints of Pipes, Fittings and Specials:
Supply, Installation, Making of Flanged CI / GI / MS Pipes, Fittings and Specials Joints with all jointing materials, rubber packing, nut bolts, labour etc.for complete connection.
Size: 200 mm dia.
2
-
-
Size: 500 mm dia. (or as per actual Pump Del. Flange)
8
-
-
Size: 700 mm dia.
72
-
-
Size: 1200 mm dia.
6
-
-
SLUICE GATE
Supply, installation, testing and commissioning of Electric Actuator gear operated C.I. Sluice Gate conforming to AWWA C 501 or IS : 13349 - 1992 Class - 1 with rising spindle, single faced, wall thimble mounted, handwheel, flange back frame, head stock, Spindle with supports brackets having length as specified or to suit site condition, suitable for seating as well as unseating water head, complete in all respect.
Size : 1100 mm X 1100 mm - approx. 9.4 m spindle length (on each Inlet & outlet of screen chamber) - Flush Bottom or suitable Closing
10
-
-
Size : 1500 mm X 1500 mm-approx. 9.6 m spindle length (at Sump Compartment Inlet Gate & Sump Partition Gate) - Flush Bottom or suitable Closing
3
-
-
Size : 2200 mm X 2200 mm-approx. 8.2 m spindle length (at inlet pipe) - Conventional Bottom Closing
1
-
-
BOX TYPE MANUAL MESH SCREEN Supply, Installation, Testing and Commissioning of Box Type Manual mesh Screen having following size, made of SS 304 material having round bars of size 9 mm dia. with clear bar opening as specified here below, suitably welded in outer frame of equal Leg SS angle of size 50 mm x 50 mm x 6 mm thick or higher, with intermediate support at required locations, complete as per specs. & shall also including followings: The screen shall be with SS perforated Screening Material Collection Box at bottom end of Screen having size as specified, fabricated from 3 mm thk. SS sheet, screen shall be suitable to slide complete screen through rollers between existing guide channel of MCP 400, embedded/ fixed in wall on both sides of RCC wall up to top of chamber with all necessary hardware, SS nuts, bolts & washers, sacrificial Brass lugs on sides, min. two lifting lugs/hooks & SS lifting chain having intermediate link/chain of 150 mm dia. or suitable higher size at every 1.5 m distance with shackle, etc. complete in all respects and provided with 1 set of cleaning rake with each screen complete as per specification and complete in all respect.
Screen Size: 1400mm (W-or actual chamber width) x 2200mm (H) x 300 mm (D) Screening Box size: 300 mm height with width & depth as per screen Opening: 50 mm x 50 mm sq. opening.
(w/o Guide channel & MS supporting structure)
(Note: Screen suitable for 1400 mm wide screen chamber or to suit site requirement.)
3
-
-
Supply, installation, testing and commissioning of Mechanical Coarse Bar Screen with multiple rake blades, in SS 304 having 75 deg. angle of inclination to horizontal, having 20 mm clear opening between bars of size 10 mm thick and 50 mm depth suitable for installation in screen chamber of about 1.4 m wide X 9.95 m deep with max. 1.8 m LD and screen having clear inside width of min.1000-1100 mm to suit channel width & with vertical bar height of 3.0 m, along with electrical control panel suitable for auto-manual operation, screening disposal arrangement up to ground level to drop on belt conveyor with all accessories & SS hardware’s, etc. as per tender drawing & Specification & complete in all respect.
Rakes shall be provided for every 1.5 to 2.0 m screen channel depth. The chain shall have a breaking load of min. 90 kN.
3
-
-
Supply and providing HDPE bin/ barrel (with min. two lifting lugs/hooks) of min. 300 litre capacity of appropriate size to suit the site requirement for collecting screening disposal from Mech. screen.
3
-
-
SINGLE GIRDER EOT CRANE:
SITC of Single girder type E.O.T. crane with electrically operated hoist, class II duty, geared travelling trolly with lift as specified here below complete with long travel rail track (40 sq.mm. bar), moving or cross girder, all three motions electrically operated by suitable rating motor IP54, control panel, & down pendant control block, brake, safety device, cables from motor to starter panel & other required accessoaries & manufactured and tested as per IS-807, IS-3938 & IS-3177, class-II, complete as per IS & Specifications. Note: Minimum as specified capacity or higher as per requirement such that EOT crane capacity is min.1.25 times of the pump /motor OR single heaviest component to be lifted within pump house.
Capacity: 5 Ton, (at Pump House)
Span: App.8.5 m (or as per site)
Lift: 17.0 m or (or as per site)
Bay length: App. 30 m (or as per site)
2
-
-
Capacity: 3 Ton, (at Screen Chamber)
Span: App.9.8 m (or as per site)
Lift: 17.0 m or (or as per site)
Bay length: App. 30 m (or as per site)
1
-
-
PORTABLE DEWATERING / DESILTING PUMP SET
Supply and testing of Submersible non clog Portable Dewatering Pumpset with C.I. casing & CF8M impeller, 30 m flexible PVC delivery hose pipe of pump delivery size, rated for 6.0 kg / cm2 presure, 15 mtr SS lifting chain, 20m pair of cable for motor to starter panel, suitable for 3Phase, 415 V, 50 Hz AC supply and min. motor rating as indicated here below, Switch-Starter panel with PMU suitable inter lock for winding protection, moisture controller for fault detection and auto stop facility, with buit-in level switch for dry run protection and auto stop facility, 20 m suitable size power supply cable to starter panel, GI/CI pump stool and other required accessories for wet well. Capacity : 50 m3 / hr.
Head : 20 m
Motor Rating: Mini. 7.5 kW (or higher rating as reco. by pump manufacturer)
2
-
-
Providing, Supply of Structure Steel at site of work with freight, loading, unloading carting, etc. including all taxes and duties complete such as joints, channels, angles, Iron Rails, ISA/ISMC/ISMB/MS flat, Plates, Chequered plates (below 10mm thickness) for cable trench etc. required for support structure of all Electro-mechanical equipment, piping, etc. for support on floor / wall / beam / brackets etc. as per tender and IS.
3000
-
-
Labour Charges for lowering, laying, Fixing with fabrication various size section of MS such as joints, channels, angles, Iron Rails, ISA/ISMC/ISMB/MS flat, Plates, Chequered plates, for cable trench etc Complete with two coats of red oxide and two coats of approved colour shade of epoxy paint as per relevant IS and as per specification.
3000
-
-
BIOLOGICAL TYPE ODOUR CONTROL SYSTEM SITC of Biological Type Odour Control System for ISPS shall be provided as per Specification & complete the work in all respects, satisfactory operation of Odour Control System.
1
-
-
ELECTRICAL WORK
11 kV SWITCHYARD / TWO POLE (DP) STRUCTURE:
Supply, Installation, Testing and Commissioning of 11 kV, 3 Phase, 50 Hz, Two Pole Structure made of 6" X 3" 'I' section girder having min. 9mtr. length, 4" X 2" M.S. channels, angles, clamps, nuts, bolts, stay wires including earthing system etc. suitable for erection of following / indicated accessories duly connected with ACSR conductor as per approved drawings & in compliance with requirements of IS/IEC
(a) 11kV 200A DO (drop out) fuses with S.R.B.P. tubes carries (03 nos.) (b) 11kV 400A G.O.D. switch complete with insulators, operating handle with galvanized pipe, square bar etc. (01 set) (c) 11kV lightning arrestors with clamps (03 nos.) (d) 11kV shackle (Disc/Pin/Post) as required insulators (06 nos.)
(e) ACSR Dog Conductor (mini. 30Mt.) (f) 11 kV fiber operating rod (g) 20 mm dia. GI stay sets (2 sets), required foundation etc. and to be painted with two coat of red oxide and final two coat of Aluminium paint at site as per IS, Specification and Drg.
1
-
-
H.T. INDOOR SWITCH GEAR PANEL
SITC of 11 kV, 500 MVA, 630A, Indoor, Extensible type, Horizontal draw out, Motorised spring charging mechanism, 3 breaker Vacuum Circuit Breaker Panel (1 No. Incomer + 2 Nos. outgoing), with EC grade copper busbars along with required Resin cast CT Dual primary & secondary, Cl: 0.2/5P10, 15VA, Digital MFM with RS 485 with 3 Line Display, Class-0.2 for Incomer, CT Dual secondary, Cl: 0.5/5P10, 15VA, Digital MFM with RS 485 with 3 Line Display, Class-0.5s for outgoing feeder and PT (dual secondary) Cl:0.5/3P, min 200VA or higher for metering and protection, 110V DC power pack for individual incoming and outgoing feeder, Annunciator, Hooter, Indicating lamps, Numerical Protection relay (current & Voltage Based) with RS 485 with combined protection for 3O/C+1E/F, S/C, Under & Over Voltage, Tfr. Protection Aux. relay etc. High speed tripping relay, Trip ckt supervision relay, Fuse failure relay, Digital Power factor meter, Ammeter, Voltmeter (Only I/C), A/M switch, L/R switch suitable for Local (from panel) & in Auto mode through PLC/SCADA etc. complete in all respects as per IS, Specification.
1
-
-
SITC of H.V. CABLES SITC of 11 kV (E), 3C x 240 sq.mm., Aluminium, extruded innersheath, Armoured, XLPE , H.V Cable as per IS 7098 (part 2) and Tech. Specification. (DP Structure to HT panel, HT panel to TFR 1 &2)
110
-
-
SITC of the Indoor Heat shrinkable Termination: SITC of Indoor H.T. cable end terminations Kit for 11 kV (E), 3C x 240 sq.mm. XLPE armoured cable with all accessories as required.
5
-
-
SITC of the Outdoor Heat shrinkable Termination:
SITC of the Heat shrinkable type Outdoor H.T.cable end terminations suitable for 11 kV, 3C x 240 sq.mm. XLPE (E) armoured cable.
1
-
-
DISTRIBUTION TRANSFORMER SITC of 1600kVA, 11/0.433 kV, Outdoor Transformer continuously rated, 3-phase, 50 Hz, OCTC, ONAN cooled, copper double wound core type, vector group Dyn11, Delta(HT)/Star(LT), Oil immersed winding with temperature rise in oil / winding 40/45 deg.C above design temperature with neutral brought out to connect to separate earthing including Terminal arrangement bushing / cable Box on HT side and cable box on LT side, first fill of oil along with Fittings & accessories as per Energy Efficiency level-1 of IS:1180 (Part-1):2021 (earlier level-2 as per IS:1180 (part-1):2014)and its latest amendments etc. and Tender Specification. Note: Transformer shall be suitable for parallel operation. Minimum requirement shall be as below:
Both transformer shall have " Identical X/R ratio, phase angle shift, polarity, phase sequence, frequency, position of tap changer. Turns ratio & voltage ratio".
2
-
-
Transformer temp. rise/Heat run test charges @manufacturers works.
1
-
-
Transformer Total Losses(W) Testing at ERDA Laboratory to confirm Guaranteed losses as per Energy Efficiency level-1 of IS:1180 (Part-1):2021 (earlier level-2 as per IS:1180 (part-1):2014)and its latest amendments etc. and Tender Specification.
1
-
-
Supply and levelling of Switchyard & transformer yard using gravel, fine sand and other required filing material, enmarked for the Switchyard & Transformer yard including removing of trees or boulders etc. if any. The general level of the yard shall be at a convenient level for movement of man and material and it should match with FGL and as per Specification and Drg.
100
-
-
Supply and Installation of GI Chain link fencing frames with L angle/Channel post around Switchyard & Transformer yard etc. as per Specification and Drg.
50
-
-
SITC of 3.0 mtr wide gate with GI chain link as per Specification and Drg.
3
-
-
LOW VOLTAGE (LT) PANEL BOARD (PMCC) :
SITC of PMCC Panel (50kA), compartmentalized, floor mounted, operating height maximum 1800/1900 mm, Extensible on both ends, suitable for Manual & Auto operation -Local & through PLC/SCADA operation as per site conditions complete in all respects as per Tender SLD / Specification / IS and including following as minimum:
(1) INCOMER 1&2: FP, 2500A, 50 KA Microprocessor EDO ACB LSIG with inbuilt RS 485 MODBUS communication with Digital Voltmeter with VSS, Digital PF Meter, Digital Ammeter with ASS, Resin Cast CT- Cl : 0.5,10VA, Digital MFM with RS 485 with 3 Line Display Cl. 0.5, Breaker Control Switch (TNC), A/M, L/R switch, Indicating lamps, Push buttons etc,. with electrical & mechanical interlocking between Incomers and buscoupler. (1.1) Surge protection device, 3P + N, Type 2 for lightning/surge protection. Load sensing CT in Incomer & Busbar for APFC panel Cl.-0.5. Constant voltage/control voltage transformer 2000VA, 415V/230V AC, with tapping +/-5% in steps of 2.5%, 16A DP MCB & 18A Power contactor.
(2) BUS-COUPLER: One no. FP 2500A ACB (same as per Incomer) (2.1) 2500A TPN, EC grade AL Main busbars. (Busbars size as per 50KA fault level and Temperature rise with Minimum current density 0.8A/Sq.mm) (3) TRANSFORMER FIXED COMPENSATION FEEDER (70 KVAr): 2 Sets: Each comprising of 200A FP Thermal magnetic MCCB, Ind. Lamp, with Capacitor duty contactor,ON Delay timer, individual MCCB/MCB as per Tender SLD.
(4) SOFT STARTER FOR 275 KW MOTOR : 8 NOS
Each feeder comprising of Soft Starter with Internal/External bypass contactor for 275 kW Motor or higher as per pump manufacturer reco. with soft starter rating minimum (550A @ 50deg C) with suitable derating with detachable type door mounted display key pad and with 630A TPN microprocessor MCCB LSIG, 650A, AC3 duty Line contactor, Semi conductor fuse, Digital MFM with RS 485 Cl. 0.5, Resin Cast CT Cl: 0.5, PMU,Temperature Scanner with RS-485, SPP, A/M, L/R switch, Indicating lamps, Push buttons etc. (5) 400 KVAR APFC POWER FEEDER: 2 NOS: Each feeder comprising of 1000A TP Microprocessor based EDO ACB, 50kA (LSIG)with inbuilt RS 485 MODBUS communication with Digital Ammeter, ASS, CT, Indicating lamp, etc.complete in all respects.
(6) 63A TPN TM MCCB FEEDER : 2 Nos. (2 nos. Spare)
Each feeder comprising of 63A TPN Thermal Magnetic (TM) MCCB, with indicating lamp etc. (7) 32A TPN TM MCCB FEEDER : 10 Nos.(4nos. for PDB, 2nos. Portable De-silting Pump, 2nos. Scrteen Panel & 2nos. spare)
Each feeder comprising of 32A TPN Thermal Magnetic (TM) MCCB, with indicating lamp etc. (8) 63A TPN TM MCCB FEEDER FOR ALL MCB FEEDERS: 2 sets: Incomer: 63A TPN Thermal Magnetic (TM) MCCB, with indicating lamp etc. 8.1) 9 nos. 32A 'C' curve 4P MCB feeders (for 1no. Ind LDB, PLC Panel, 4 nos. spare feeders & 3nos. EOT) 8.2) 1 nos. 32A 'C' curve 4P MCB with Time switch,32A contactor 4P,ON lamp feeders (for Outdoor LDB)
8.3) 4 nos. 16A DP MCB feeders (for single phase supply for 2nos. X'mer marshaling box, HT Panel & Spare.) (10) Multiplication relay as required for dry run protection of pumps. NOTE: 1). All MCCB shall be 50KA, Ics = 100% Icu, inbuilt protection with adj O/L and Adj.S/c (LSIG for MP MCCB),Extended rotary handle, Terminal spreader, Auxiliary Change over contact and trip contact as required.2) All MFM, ACB, Soft Starter,MPR,Temp.Scanner etc shall be with inbuilt RS 485.
1
-
-
SITC of 400 KVAR at 415V, APFC Panel,compartmentalised, floor mounted, extensible type on both sides with Horizontal bus bar arrangement as per site requirement & complete in all respects as per SLD / Specification / IS and including following as minimum:
(1) INCOMER: 1.1 1000A, TPN, 50 KA TM EDO ACB LSIG with inbuilt RS 485 MODBUS communication with Digital Voltmeter with VSS, Digital Ammeter with ASS, Resin Cast CT- Cl : 1.0,10VA, Breaker Control Switch (TNC), A/M, L/R switch, Indicating lamps, Push buttons etc.
1.2 Microprocessor based APFC Relay,144sq.mm, 12 STEP with RS 485 with minimum operating current 10mA.
2. OUTGOING CAPACITOR FEEDER:
Capacitor feeder of following rating comprising of TPN MCCB/MCB, Capacitor duty contactor, 415V Heavy duty MPP / gas filled capacitor unit, A/M Switch, ON Delay timer,ON / OFF Push button, ON Indication lamp etc. as per Tender SLD& Specification 2.1 50 KVAR FEEDER: 7 NOS
2.2 20 KVAR FEEDER: 2 NOS
2.3 10 KVAR FEEDER: 1 NOS
2.4.Two nos. Vacant feeder suitable for 1-25KVAr and 1-10KVAr to be provided.
NOTE: 1. Heavy duty 8" cooling/exhaust fan : 2 nos Minimum or higher as required at the top of the panel with canopy/hood.
2
-
-
SITC of Lighting Distribution Board (LDB) as under:
SITC of 3 Phase 4 Wire 4P, double door Prewired LDB each for 2nos. Indoor Lighting & Outdoor Lighting Suitable to house :
Incoming: 32A FP, ELMCB (30mA)
Outgoing: 20A SP MCB (9 nos.) & 16A SP MCB (9 nos.)
3
-
-
3 Phase 4 Wire TPN, 8 way Pre-wired-MOG / MOV / Aux. PDB for Auxiliary accessories Load power supply (For MOG, MOV, Aux. load & rest spare)
Incoming: 63A 4P, MCB 'C' Curve
Outgoing: 8 nos. 32A 4P MCB 'C' Curve
4
-
-
SITC of LCS pushbutton station ON & OFF (E-stop) set complete with Enclosure, necessary mounting/ fixing arrangement on wall / pipe support etc. to be installed near motors for remote operation, etc. as per IS and specifications. (including structural steel) (For 8 nos. Pump)
8
-
-
SITC of stand / wall mounting type MS Junction Box, minimum 2.5mm thick, with detachable cable gland plate of 3mm thick, duly powder coated, with earthing terminals, steel structure stand for mounting of JB, etc. for Jointing/Termination suitable for 1.1 kV Submersible Flexible Copper Power cable with Aluminium/ Copper armoured power cable from PMCC . Scope shall include providing suitable rating AL busbars, Support insulators, Crimping type lugs,nuts,bolts,washers etc. complete in all respects as instructed by E.I.C. Drawing shall be got approved before SITC of the same. Lugs of cables shall not be connected directly. (Structure steel for Stand shall be measured separately)
JB of minimum Size: 400mm x 400mm x 100mm or higher as required. or higher as required ( for 8 nos. Pump)
8
-
-
SITC of stand / wall mounting type MS Junction Box, minimum 2.5mm thick, with detachable cable gland plate of 3mm thick, duly powder coated, with earthing terminals, steel structure stand for mounting of JB, etc. for Joining/Termination suitable for 1.1 kV Submersible Flexible Control Cables of Submersible pump with control cable from PMCC/MCC. Scope shall include providing Terminal connectors for connecting control cable, copper lugs, etc. complete in all respects as instructed by E.I.C. 20% additional/spare Terminal connector shall be provided. Drawing shall be got approved before SITC of the same. SMC/FRP/Bakelite separator shall be provided between Power cable section & Control cable section. Lugs of cables shall not be connected directly (Structure steel for Stand shall be measured separately). JB of minimum Size: 400mm x 400mm x 100mm or higher as required. or higher as required ( for 8 nos. Pump)
8
-
-
LOW VOLTAGE (LT) CABLES Supply, laying, testing and commissioning of 1.1 kV, A2XFY(X)/2XWY(X) XLPE insulated (IS 7098) AL / Cu stranded conductor, Extruded innersheath cables as per specification & IS. The cable when laid outside the building shall be laid underground in trench with brick & sand protection/in DWC pipes as per specified method and shall be laid in prepared trench/ on cable tray when laid inside the building.
3.5C x 300 sq. mm. A2XFY(X) Cable (10 Runs/ incomer -TFR to PMCC Panel, 4 Runs for PMCC to APFC panel)
700
-
-
3C x 300 sq. mm. A2XFY(X) Cable (2 runs for PMCC to 8 nos. 275 kW Subm. pump)
650
-
-
4C x 10 sq. mm. A2XFY(X) Cable (For 4 no PDB )
200
-
-
4C x 6 sq. mm. A2XFY(X) Cable (For Mechanical Screen panel, 2nos. WR-DB with TPN MCB at Pump House, 1nos. Indoor LDB, Outdoor LDB, 2nos. Portable Dewatering Pump, for 6 nos. street light )
500
-
-
4C x 2.5 sq. mm. 2XWY/2XFY(X) Cable (For 2nos. TPN MCB for Elect. Crane at Pump House, for EOT at Screen, for 3 nos. mech screen, 14 nos MOG, 10nos. MOV & PLC Panel)
700
-
-
2C x 2.5 sq. mm. Multi strand 2XWY(X) Cable (For HT Panel, for 2nos. APFC CT & X'mer marshaling box Single Phase Supply)
150
-
-
5C x 1.5 sq.mm. 2XWY(X) Cable (For 8 nos. Pump LCS)
320
-
-
10C x 1.5 sq.mm. 2XWY(X )Cable (2Run Tr. to HT Panel control cable)
120
-
-
12C x 1.5 sq.mm. 2XWY(X) Cable (For 8 nos PMU)
320
-
-
10Triad x 1.0 sq.mm. individual triad and overall shielded with aluminum mylar tape Signal Cable for RTD (winding & Bearing ) of motor. (for 8 nos 275kW motor)
320
-
-
CABLE END TERMINATION AND CONNECTION:
SITC of Double compression Ni-Plated brass cable glands and crimping type Bimetallic lugs / sockets with necessary tools and equipments as specified in specifications and IS. The glands and lugs / sockets shall be suitable for cable size and type mentioned below & as per specifications.
1) Earthing the glands and armouring with earthing clamp and jumper and also connecting to common earth bar.
2) The job also includes, if necessary, supply & fixing of extension busbar of same material on MCCB or panel board terminal / connector to connect more than one no. of parallel cables or to connect higher size cable to lower size unit. The job also includes earthing the glands and armour of the cable with common earth bar or flexible copper mesh.(Cable termination qty. shall be as per site requirement)
3.5C x 300 sq. mm. A2XFY(X) Cable (10 Runs/ incomer -TFR to PMCC Panel, 4 Runs for PMCC to APFC panel)
56
-
-
3C x 300 sq. mm. A2XFY(X) Cable (2 runs for PMCC to 8 nos. 275 kW Subm.pump J.B.)
48
-
-
4C x 10 sq. mm. A2XFY(X) Cable (For 4 no PDB )
8
-
-
4C x 6 sq. mm. A2XFY(X) Cable (For Mechanical Screen panel, 2nos. WR-DB with TPN MCB at Pump House, 1nos. Indoor LDB, Outdoor LDB, 2nos. Portable Dewatering Pump, for 6 nos. street light )
26
-
-
4C x 2.5 sq. mm. 2XWY/2XFY(X) Cable (For 2nos. TPN MCB for Elect. Crane at Pump House, for EOT at Screen, for 3 nos. mech screen, 14 nos MOG, 10nos. MOV & PLC Panel)
62
-
-
2C x 2.5 sq. mm. Multi strand 2XWY(X) Cable (For HT Panel, for 2nos. APFC CT & X'mer marshaling box Single Phase Supply)
10
-
-
5C x 1.5 sq.mm. 2XWY(X) Cable (For 8 nos. Pump LCS)
16
-
-
10C x 1.5 sq.mm. 2XWY(X )Cable (2Run Tr. to HT Panel control cable)
8
-
-
12C x 1.5 sq.mm. 2XWY(X) Cable (For 8 nos PMU)
24
-
-
10 Triad x 1.0 sq.mm. individual triad and overall shielded with aluminum mylar tape Signal Cable for RTD (winding & Bearing ) of motor. (for 8 nos 275kW motor)
16
-
-
CABLE TRAY
SITC of G.I. (hot dip galvanised) Ladder type medium duty (2mm thick) Cable Tray with necessary bends, tees, reducers, covers and clamps for fixing. All material shall be Hot dip galvanised as per Specification. And including all accessories. 700 x 100 mm - Ladder type
50
-
-
600 x 100 mm - Ladder type
70
-
-
300 x 100 mm - Ladder type
120
-
-
150 x 50 mm - Ladder type
200
-
-
Supply, laying and erection of 125 mm (ID) approved make Double Walled Corrugated pipes (DWC) of polyethelene (confirming to IS-14930 II) with necessary connecting accessories of same material at required depth for laying of cable below ground / road surface for enclosing cable and back filling the same to make ground as per original. (For HT cable from HT panel to each Tr./ at road crossing, etc.)
30
-
-
Supply, laying and erection of 75 mm ID approved make Double Walled Corrugated pipes (DWC) of polyethelene (confirming to IS-14930 II) with necessary connecting accessories of same material at required depth for laying of cable below ground / road surface for enclosing cable and back filling the same to make ground as per original. (LT cable from Transformer to PMCC panel / road crossing etc)
150
-
-
Making Trench/ excavation in soft soil of suitable width and of depth (minimum 750mm depth (LT) & 1000mm for HT) for laying cable/ DWC pipe and back filling the same and making the surface as normal ground as per IS & Tender Specification/Drg. (For laying of HT/LT cable)
100
-
-
Cable Protection/ Covering in Trench: Cable Covering with second class bricks or cement tiles laid cover the cable (top) & also on both side with sand bedding/cushioning of 75mm.& covering of 150mm Layer of sand above cable (16 bricks per meter.) as per IS & Tender Drg/ Specification. (For HT/LT cable protection ) complete in all respects as instructed by EIC.
30
-
-
CHEMICAL EARTHING SYSTEM
SITC of Maintenance free chemical earthing (copper) with earthpit of minimum bore size dia. 225mm Safe Earthing Electrode consisting Pipe-in-Pipe Technology as per IS-3043:1987 /Tech spec. made of corrosion free Pipes having Outer pipe dia of 48 mm having 250 Micron copper plating, Inner corrosion free Hot dip galvanised (80 to 100 micron) pipe dia of 26 mm with copper flat strip type connection terminal 14mm dia with constant ohmic value surrounded by highly conductive corrosion resistant chemical compound with high charge dissipation suitable for electrical installation & of 3Mtr. length of Pipe with two nos. 25Kg. bag of Back filling compound.. (2 nos HT Panel, 2nos. Each for neutral of Tr.-1 & 2, 2nos. LA of DP structure& 2nos. PLC Panel) NOTE: Earthing Resistance value & date shall be painted on the chamber cover.
10
-
-
SITC of Maintenance free chemical earthing with earthpit of minimum bore size dia. 225mm Safe Earthing Electrode consisting Pipe-in-Pipe Technology as per IS-3043:1987 /Tech spec. made of corrosion free Hot dip Galvanised (min 150 Microns) Pipes having Outer pipe dia of 76 mm , Inner corrosion free Hot dip galvanised (80 to 100 micron) pipe dia of 26 mm with copper flat strip type connection terminal 14mm dia with constant ohmic value surrounded by highly conductive corrosion resistant chemical compound with high charge dissipation suitable for electrical installation & 3Mtr. length of Pipe with two nos. 25Kg. bag of Back filling compound. (2nos. Each for Tr.1 & Tr. 2 Body, 2nos. DP Structure, PMCC & all elect. Equipments)
NOTE: Earthing Resistance value & date shall be painted on the chamber cover.
10
-
-
SITC of pipe type earthing having 150 cms long and 2.5cms dia. Galvanised iron pipe with coupling and buch buried in specially prepared earth pit complete with necessary 8 SWG earth wire (For 2 nos. Gate light & 6 nos. street light poles earthing)
8
-
-
SITC of 75mm (w) x 8mm (T) etc. sizes as required, HOT dip galvanized GI Strip including supply & fixing using GI spacers, saddles when laid inside the building and inclusive of excavation & refilling of earth when laid outside the building & interconnection with earth pit & all electro-mechanical equipment's.
(75 X 8 G.I Strip wt.4.68 kg/m, 4.68x100Mt.=470 kg.)
470
-
-
SITC of 50mm(w) x 8mm(T) etc. sizes as required, HOT dip galvanized GI Strip including supply & fixing using GI spacers, saddles when laid inside the building and inclusive of excavation & refilling of earth when laid outside the building & interconnection with earth pit & all electro-mechanical equipments.
(50X8 G.I Strip wt.3.12 kg/m, 3.12x100Mt.=312kg.)
312
-
-
Supply, laying and erection of 25mm(w) x 3mm(T) etc. sizes as required, HOT dip galvanized GI Strip including supply & fixing using GI spacers, saddles when laid inside the building and inclusive of excavation & refilling of earth when laid outside the building & interconnection with earth pit & all electro-mechanical equipments. (25X3 G.I Strip, 0.6 Kg/m, 0.6x70Mt.=45Kg.)
45
-
-
Supply, laying and erection of 40mm(w) x 6mm(T) etc. sizes Copper Strip including supply & fixing of bolts, saddles when laid inside the building and inclusive of excavation & refilling of earth when laid outside the building & interconnection with earth pit & Tr. neutral. (40X6 Cu. Strip, 1.88 Kg/m, 1.88 x 100mtr.=190Kg.)
Copper Bolt,Nuts ,Washers shall be used for Connecting Earth electrode to individual eqp. Bitumen shall be used at the place of joint/welding.
190
-
-
Supply, laying and erection of 25mm(w) x 3mm(T) etc. sizes Copper Strip including supply & fixing of bolts, saddles when laid inside the building and inclusive of excavation & refilling of earth when laid outside the building & interconnection with earth pit & PLC Panel (25X3 Cu. Strip, 0.761 Kg/m, 0.761 x 20 mtr.=40 Kg.)
Copper Bolt,Nuts ,Washers shall be used for Connecting Earth electrode to individual eqp. Bitumen shall be used at the place of joint/welding. ( For PLC Panel Earthing)
15
-
-
SITC of HOT Dip Galvanized iron strip wire 8 SWG (For LDB, LCS, etc.) (8 SWG G.I Strip, 0.103 Kg/m, 0.103 x 350Mt.=36)
36
-
-
INTERNAL WIRING
SITC of Mains & outlet points wiring with 1.1 kV grade FRLS PVC insulated ISI marked flexible stranded copper conductor wires with medium class min. 25mm. dia. Rigid PVC pipe and accessories to be erected concealed in / to be run on surface / wall / ceiling with following sizes as mentioned below. The unit rate wirings shall be with connector, PVC junction box, wires, holder, ceiling rose, angle holder, switch, sockets, switch board, brass chromium / cadmium plated machine screws, phase and neutral wires, green Earth continuity wires etc. as required to complete wiring from LDB panel to the final outlet termination points. The wiring shall be as per IS:732, IS:4648 and as per tender specification / IS. Mains wiring with 3 wire 1.5 sq.mm.
200
-
-
Mains wiring with 3 wire 2.5 sq.mm
220
-
-
Mains wiring with 4 wire 1.5 sq.mm
150
-
-
Mains wiring with 4 wire 2.5 sq.mm
150
-
-
SITC of Point wiring for Light / fan / Bell / Primary Point with 2nos. 1.5 sq. mm & earth wire of 1.5 sq. mm (green) both are of ISI marked 1.1 kv grade FRLS PVC insulated multistrand copper wires , pipe to be erected concealed in flushed on wall / ceiling, complete with 6A Tissino Type ISI marked flush type switch / bell push & accessories erected on metal / PVC Box covered with 3 mm thick PC (Polycarbonate) / Acrylic sheet with necessary lamp holder / ceiling Rose / H. D. connector as directed with medium class Rigid PVC pipe & accessories.
42
-
-
SITC of 6A independent Plug with 2nos. 1.5 sq.mm Cu. Mains size wiring & earthwire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires with medium class Rigid PVC pipe and accessories to be erected on wall / ceiling, complete with ISI marked 3 / 5 Pin socket and tissino type switch erected with earth continuity connection erected on Metal / PVC box covered with 3 mm thick PC(Polycarbonet) / Acrylic sheet. (1no. AUDA HT Room, 4 nos. LT Room, 1no. for SCADA Room, 1no. for office)
7
-
-
SITC of One 300/380 mm dia. Ex fan 16A independent Plug point near Ex. Fan with 2nos. 4 sq.mm Cu. Mains size wiring & earthwire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires with medium class Rigid PVC pipe and accessories to be erected on wall / ceiling, complete with ISI marked 3Pin socket and tissino type switch erected with earth continuity connection erected on Metal / PVC box covered with 3 mm thick PC(Polycarbonet) / Acrylic sheet. Plug point shall be near Ex.Fan.( 3 nos. LT Room, 1no. Toilet)
4
-
-
SITC of 6/16A independent Plug with 2nos. 4 sq.mm Cu. Mains size wiring & earthwire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires with medium class Rigid PVC pipe and accessories to be erected on wall / ceiling, complete with ISI marked 3 / 5 Pin socket and tissino type switch erected with earth continuity connection erected on Metal / PVC box covered with 3 mm thick PC(Polycarbonet) / Acrylic sheet. (1no. AUDA HT Room, 4 nos. LT Room, 1no. for SCADA Room, 1no. for office)
7
-
-
SITC of Single Phase 20A 3 Pin Metal clad Industrial Type Socket with plug top and 20A SPMCB, suitable for flush mounting, in 16 SWG MS box of suitable size and covered with 3 mm thick electrical grade hylam sheet or equivalent ISI marked Electrical grade Bakelite sheet and earthing with 2.5 sq.mm insulated copper wire run inside the conduit including interconnections etc. complete as required. (1no. at LT Room, 2nos. at SCADA Room & 1no. at Office )
4
-
-
SITC of Sheets steel powder coated weather proof enclosure with One no. 32A, 415V 4P MCB for Motor & Inductive load (C Curve) having 10 KA breaking capacity & confirms to IS: 8828. (2 no.WR DB TPN MCB at PH, 2 no. for EOT at pump house, 1no for EOT , 2nos. Portable dewatering pump)
7
-
-
LED LIGHT FIXTURES & LIGHTING:
SITC of Indoor wall mounting 20Watt or up to 25% higher wattage LED 4 feet Tube Light indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA polyester powder coated and high U.V. & corrosion resistance with diffuser and/or Polycarbonate optics with company mark/name 120 to 300 V,Power Factor more than 0.9, THD 20 %,
CCT 4000 K to 6500K, Uniformity ratio 0.7,
Luminaries efficacy 85 lumens/watt ,
LED driver efficiency 85 %
(Each fitting required LM-79 & LM-80 Certificates)
Tube Light with integral / non-integral driver, Surge-4KV,IP-20, 4 feet, Cat-III (For 3 nos. AUDA HT Room, 10 nos. at LT room, 4nos. Office & 1 no. Toilet)
18
-
-
SITC of Square / Circular, Surface / Recessed Mounted 20 Watt or up to 25% higher wattage LED Downlight with provision for spring loaded mounting clips complete.
20 Watts or up to 25% higher wattage, Surge-4 KV, Cat-III
4
-
-
Item description as per Sr. No. 10.1 SITC of 7 watts LED Lamps integral type,cool white with PC diffuser suitable for B22 LAMP holder(For 1no. AUDA HT Room, 1 nos. at LT Room, 1 no.at Office room).
3
-
-
300mm sweep 960 R.P.M exhaust fan, capacitor type, having double ball bearing, M.S.blades, mounting frame, forearms, suitable to operate on 230V,50 HZ AC supply conforming to IS: 2312.Fan shall be painted with epoxy grey colour controlled by one 6 A flush type switch on board and 6A plug point near Ex. fan. (1 nos. at Toilet)
1
-
-
SITC of 380mm sweep 1400 R.P.M exhaust fan, capacitor type, having double ball bearing, M.S.blades, mounting frame, forearms, suitable to operate on 230V,50 HZ AC supply conforming to IS: 2312.Fan shall be painted with epoxy grey colour controlled by one 6 A flush type switch on board and 6A plug point near Ex. fan.(3 nos. LT room)
3
-
-
SITC of 40W LED Surface / Wall mounted LED Flood Light fittings with High power White LEDs wattage of 1Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses with company mark/name engraved or embossed 120 to 300 V,Power Factor more than 0.95, THD 20 %, CCT 5000 K to 5700K,
Uniformity ratio 0.45, Luminaries efficacy 85 lumens/watt . LED driver efficiency 85 %.
( Each fittings required LM-79 & LM-80 certificates) (IP-65), Surge -4KV Cat-III For Indoor use: (4nos. at LT Room)
4
-
-
SITC of 'B' class galvanised iron pipe 32 mm outside dia 45 cms long duly welded on 20 cms x 20 cms x 3 mm thick M.S. base plate, erected on wall or corner for mounting luminaries with necessary hardware materials duly painted for wall mounting indoor flood light fixtures on Wall of Buildings & post top lantern.
16
-
-
1200mm sweep ceiling fan, capacitor type, having double ball bearing 450mm down rod, canopies, shackle, rubber bush, blades, electronic speed regulator, suitable to operate on 230V,50Hz AC supply conforming to IS: 374/1979.Fan shall be painted with white colour.(2 nos. LT Room, 1no. office Room)
3
-
-
EXTERNAL LIGHTING (Flood LIGHT):
SITC of 70W LED Wall mounted LED Flood Light fittings with High power White LEDs wattage of 1Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses with company mark/name engraved or embossed 120 to 300 V,Power Factor more than 0.95, THD 20 %, CCT 5000 K to 5700K,
Uniformity ratio 0.45, Luminaries efficacy 85 lumens/watt . LED driver efficiency 85 %.
( Each fittings required LM-79 & LM-80 certificates) (IP-65), Surge -4KV Cat-III For Outdoor use: (10 nos. for area lighting)
10
-
-
SITC of 40watt, Cat-III Post Top Lantern LED fitting comprises of 650 MM TOP Diameter, 120 degree beam angle with 3 Nos. Supporting Ribs and with 0.5mt. G.I. fitting pipe (for Gate light)
2
-
-
EXTERNAL LIGHTING (STREET LIGHT):
SITC of Street Light Pole, steel tubular swaged type, 7.5 meter long with single arm & M.S.base plate with pipe cap and over hung 1.5 m long having dia to suit the socket of 240V LED street light fixtures. Street light pole unit rate shall be with (i) IP 65 SMC box of size 20 x 15 x 15 cms. with MCB & terminal strip inside the box with hinged/sliding door (ii) 50mm dia, B class GI pipe bracket min.1.5mtr long for Incoming & outgoing cable (iii)MS Cable Clamp of 25 x 3mm (iv)SITC of 1.5 Mtr.single Arm bracket of medium duty MS pipe of 4.2 cms. Out side dia complete with suitable sleeve tubing 45 cms. long of required size of pole top etc. and having spread of 1.5.mtr. length with 110 deg.(v) Complete painted with one coat of Red oxide / PU base primer and two coats of Aluminium / PU paint for Pole,Arm, pipe etc.
6
-
-
SITC of 70W LED Street light fittings with High power White LEDs wattage of 1Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses with company mark/name engraved or embossed 120 to 300 V,Power Factor more than 0.95, THD 20 %, CCT 5000 K to 5700K,
Uniformity ratio 0.45, Luminaries efficacy 85 lumens/watt . LED driver efficiency 85 %.
(Each fittings required LM-79 & LM-80 certificates) Street Light (IP-65), Surge -4KV, 70 watt Cat-III
6
-
-
SITC of M-20 / 1:2:4 cement concrete foundation for Street light pole & 70 % PCC from bottom including excavation for the pole of size 60 x 60 x 120 cms. Deep in below ground level with plinth of 45 cms x 45 cms(or 45 cms dia x 45 cms) high upper ground level with necessary curing and finishing in approved manner.
6
-
-
SAFETY ACCESSORIES
SITC of following safety accessories complete with necessary fixing brackets, other accessories and tools etc. as required to complete the job.
Supply & Erecting carbon dioxide (CO2) fire extinguisher of 6.5kg capacity with necessary clamps made from 50 x 6 mm M.S. Flat with nut & bolts grouted in wall complete. (for 1no. DP Structure, 2nos. X'mer-1 & 2, 1no. HT Room, 1no. for LT Room)
5
-
-
Supplying of standard first AID box with antiseptic cream, medicine for use on wounds due burn, crepe bandage, guage bandage, medicated ready to use bandage (Band-aid) adhesive tape for medicinal user, scissors, antiseptic solution (Savlon or similar) etc. (All above contents shall be of standard makes) (1 no. for HT room, 1no. For LT Room, 1no. Pump House)
3
-
-
Supply & fixing of printed instruction (First Aid) Chart both in English and Gujarati and duly framed with front glasses, for treatment of person suffering from electric shock. (1 no. for HT Room, 1 no. For LT Room, 1no. Pump House)
3
-
-
Supplying & fixing of floor mounting stand for keeping four nos. of FIRE buckets comprising 1500 mm in length, 900 mm height frame made out of 30mm X30 mm X 4 mm angle iron with cross supports for legs, welded with 4 hooks and duly painted with one coat of red lead and two coats of approved enamelled silver paint. (DP structure, HT Panel, Tr. 1 & 2)
4
-
-
Supply and fixing of 20 W fluorescent lamp operated emergency light with maintenance free battery for 3 hours operation during mains power failure. (for 1no. LT Room)
2
-
-
Supply and laying of Synthetic Insulating Mat of Class - B of min. thickness 2.5mm as per IS:15652 and with good electrical insulation property for 11kV/22KV as per site requirement. (for HT Panel)
3
-
-
Supply and laying of Synthetic Insulating Mat of Class - A of min. thickness 2mm as per IS:15652 and with good electrical insulation property for 1.1KV/3.3KV as per site requirement. (for LT Panel)
25
-
-
Providing pair of rubber hand gloves ISI make suitable for working on 22 KV supply
2
-
-
LIASONING CHARGES FOR OBTAINING NOC
Power Liasoning Charges for obtaining N.O.C from Electrical Inspector / Statutory authority for Power / Ele. Installation. (Fees shall be paid by tenderer for obtaining N.O.C. from Electrical Inspector / Statutory authority on behalf of client and shall be reimbursed on submission of original receipt to Client).
Liasoning Charges shall include preparing required attested documents & drawing for obtaining NOC on behalf of client (Applicable Fees / deposits shall be reimbursed by Client).
1
-
-
INSTRUMENTATION WORK
PRESSURE MEASURING SYSTEM
Supply, installation, testing & commissioning of Diaphragm Type pressure guage having 150 mm dial with necessary fittings/accessories in SS 316, manifold valve, snubber, nipples etc. complete.
Range :0 - 4 Kg/cm2 (at pump's delivery side)
8
-
-
LEVEL MEASURING SYSTEM
Supply, installation, testing and commissioning of Diff. Ultrasonic Level Transmitter along with all mounting accessories, hardware, etc. complete in all respects and as per specs & with relay output for autu operation of screen and having following measurement ranges for liquid (Sewage) application:
Meas. Range: upto 12 m ( for U/S & D/S of Mech. Screen)
3
-
-
Supply, installation, testing and commissioning of Ultrasonic type Level Transmitter along with all mounting accessories, hardware, etc. complete in all respects and as per specs and having following measurement ranges for liquid (Sewage) application:
Meas. Range: upto 15 m ( at both Compartment of Wet Well)
2
-
-
Supply, installation, testing and commissioning of Float Type Level Switch along with 15 mtr cable and WP Junction Box (at both Compartment of wet well for dry run protection of pumps and alarm and at upstream of manual scrreen for high level alarm ) complete in all respects and as per specs.
5
-
-
ELECTRO MAGNETIC FLOWMETER Supply, installation, testing and commissioning of remote type Full Bore Electromagnetic flow meter comprising of IP-68 Sensor, IP-66 remote transmitter with 20 m cable between sensor and transmitter along with all accessories, hardware, etc. The scope also includes necessary connection with 2 nos. header pipe.
Meter size:1200 mm NB
Pipe Size : 1200 mm NB
Flow Measurement Range : 2230 - 9000 m3/ hr.
2
-
-
PLC BASED INSTRUMENT CONTROL PANEL
Supply, Installation, Testing & Commissioning of PLC Based Instrument control Panel with Local SCADA system comprising of min. 21” PC console with A4 size laser jet printer for report / alarm printing, SCADA run time Min.15 display Screen / Equvalent tag. software, 4G GPRS Modem for Remote data transmission to concerned STP SCADA / Central SCADA, SIM Card, Communication with MFM at PMCC Panel, Open protocol connectivity along with required Ethernet switch,etc. Instrument Control Panel '(PLC Enclosure / Panel ) with necessary PLC based logic and wiring , Min 2 nos. flow indicator/totalizer, Min. 2 nos. process Indicator, Min 4 no. analog signal multiplier, , Min. 1 kVA UPS (with 30 min backup alongwith filter for harmonic, suitable rating SMF batteries alongwith battery charger, cabling between UPS and battery and all other accessories as per standard), etc. complete in all respects and as per specs PLC having minimum I/O count of 180DI / 80DO / 20AI / 0AO.
All work shall be carrierd out complete in all respects and as per tender specifications.
1
-
-
INSTRUMENT CABLE & ACCESSORIES
Supply, Laying, Installation, Connection, Termination, Testing & Commissioning of Instrument Cables, along with cable glands, lugs, cable trays, required junction boxes, fittings and accessores as per specs. The unit rate shall include. (a) Supply, loading & unloading of the cable at site from store. (b) Shifitng of cable from site store to place of installation. (c) Fixing of cable clamps, brackets, supports, route markers etc. where ever required to fix the cables safely. (d) Excavation, back filling and levelling of ground alongwith laying of fine sand, protection bricks and other necessary civil material for laying cables outside the building. POWER CABLE
3C X 1.5sq.mm.
300
-
-
CONTROL CABLE 10C X 1.5sq.mm.
1400
-
-
SIGNAL CABLE
1P X 1.5sq.mm.
600
-
-
INSTRUMENT CABLE TRAY G.I. Perorated type cable tray shall be made out of galvanized mild steel sheets of 2 mm thickness with required asccessories . All material shall be Hot dip galvanised as per IS 2629 ( as mentioned in specification and tray hardware shall be in GI.
200 X 25 mm - Perforated type
50
-
-
50 X 25 mm - Perforated type
150
-
-
CABLE END TERMINATION AND CONNECTION : 'Supply, fixing, connection, testing and commissioning of double compression brass cable glands and crimping type Bimetalic lugs / sockets with necessary tools and equipments as specified in specifications and IS complete in all respects. The glands and lugs / sockets shall be suitable for cable size and type mentioned above. The job also includes earthing the glands and armour of the cable with common earth bar or flexible copper mesh as applicable. POWER CABLE
3C X 1.5sq.mm
14
-
-
CONTROL CABLE
10C X 1.5sq.mm
62
-
-
SIGNAL CABLE 1P X 1.5sq.mm.
30
-
-
TOOLS & TEST EQUIPMENTS
Magger of range 0 -1000V
1
-
-
Clipon meter (Battery operated) satisfying the following.
(i)With 0.100 mA, 0-1 A and 0-200 A AC
(ii) With 0-100 mV, 0-3 V, 0-30 V, 0-300 V and 0-1000 V
(iii) Least five (0-100) m.Ohm,(0-1) Ohm, (0-10) Ohm, (0-100) Ohm, (0-1000) Ohm.
(iv) The input impedence shall not be less than one maga ohms for voltage range.
1
-
-
Single Phase Elect. Portable Air blower 1500 RPM
1
-
-
LADDER
Ladder shall be made out of light aluminium allow of good strength. They shall be of step ladder, foldable, self supportig type with sperader of metalic angles or high strength.
3 Meter long
1
-
-
6 Meter long
1
-
-
Steel Office chair
2
-
-
Steel cupboard (6 feet H x 3.5 feet W x 1.0 feet 4 inch D)
1
-
-
Engineering, procuring, providing, constructing, installing and commissioning (EPC) and conducting 3 months successful trial run and acceptance test of 107 MLD capacity Sewage Treatment Plant at Visalpur along with all related mechanical & electrical equipment & accessories, instrumentation, including miscellaneous works etc. complete.
1
-
-
Environmental Items Covered under Environmental BOQ
Trainings as per Capacity Building Program
Training on Plans and Protocols
1
-
-
Orientation to Workers on EMP implementation
1
-
-
Environmental Quality Monitoring as per Environmental Quality Monitoring Plan
Air Quality Monitoring
Preconstruction stage – At four sensitive receptor locations along sewerage routes, once in a day for one week
28
-
-
Preconstruction stage – At five locations (3 SPS, 1 ISPS & 1 STP), once in a day for one week
35
-
-
Construction stage – At four sensitive receptor locations along sewerage routes, once in a quarter for construction period of 24 months
32
-
-
Construction stage – At five locations (3 SPS, 1 ISPS & 1 STP), once in a quarter for construction period of 24 months
40
-
-
Noise Level Monitoring
Preconstruction stage – At four sensitive receptor locations along sewerage routes, once in a day for one week
28
-
-
Preconstruction stage – At five locations (3 SPS, 1 ISPS & 1 STP), once in a day for one week
35
-
-
Construction stage – At four sensitive receptor locations along sewerage routes, once in a quarter for construction period of 24 months
32
-
-
Construction stage – At five locations (3 SPS, 1 ISPS & 1 STP), once in a quarter for construction period of 24 months
80
-
-
Surface Water Quality Monitoring
Preconstruction stage – At four water bodies along sewerage routes, one-time
4
-
-
Preconstruction stage – At water bodies near 5 locations (3 SPS, 1 ISPS & 1 STP), one-time
5
-
-
Construction stage – At four water bodies along sewerage routes, once in a quarter during construction period of 24 months
32
-
-
Construction stage – At water bodies near 5 locations (3 SPS, 1 ISPS & 1 STP), one-time, once in a quarter during construction period of 24 months
40
-
-
Operation & Maintenance - Fixed Cost
Carrying out Operation and Maintenance of works for a period of 5 years - Fixed Cost (Including Man Power, Repairs / Replacement / Maintenance of Electro-mechanical, piping & instrumentation / automation works including Spares, Consumables, Lubricants, Lab. Reagents, Glassware, etc. Repairs & Maintenance of Civil Structure, Sewerage Network with manholes, sewage pumping station & STP units, buildings etc.) & to operate the Sewerage Network, Sewage Pumping Stations & Sewage Tteatment Plant etc. (24 x 7) etc. complete as per Tender Requirement.
1st Year
12
-
-
2nd Year
12
-
-
3rd Year
12
-
-
4th Year
12
-
-
5th Year
12
-
-
Operation & Maintenance - Variable Cost
The variable cost to be quoted for total 107 mld flow & to be paid on actual flow on per mld basis during O&M period and to operate the Sewerage Network, Sewage Pumping Stations & Sewage Tteatment Plant etc. (24 x 7) etc. complete as per Tender Requirement.
To be quoted seaprately for chlorine dose, Alum / FeCl3 dose, DWPE dose and Screen & grit disposal as under.
Carrying out Operation and Maintenance of works for a period of 5 years - Variable Cost - Chlorine Dosage
1st Year
39055000
-
-
2nd Year
39055000
-
-
3rd Year
39055000
-
-
4th Year
39055000
-
-
5th Year
39055000
-
-
Carrying out Operation and Maintenance of works for a period of 5 years - Variable Cost - Other Chemicals including alum/Fecl3, etc. dosage
1st Year
39055000
-
-
2nd Year
39055000
-
-
3rd Year
39055000
-
-
4th Year
39055000
-
-
5th Year
39055000
-
-
Carrying out Operation and Maintenance of works for a period of 5 years - Variable Cost - Dewatering Poly-electrolyte Dosage
1st Year
39055000
-
-
2nd Year
39055000
-
-
3rd Year
39055000
-
-
4th Year
39055000
-
-
5th Year
39055000
-
-
Carrying out Operation and Maintenance of works for a period of 5 years - Variable Cost - Cost of Safe Disposal of Sludge, Grit, Screenings, etc. including transportation
1st Year
39055000
-
-
2nd Year
39055000
-
-
3rd Year
39055000
-
-
4th Year
39055000
-
-
5th Year
39055000
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements