Roads And Buildings Department Tender

Providing, laying, spreading, and compacting stone aggregates of specific sizes to waterbound macadam (Grade-II) (M.C. Metal of size 40 to 63mm) specification including spreading in uniform thickness, hand packing, rolling with vibratory roller 80-100kN static wt. to proper grade and camber, applying and brooming stone screening/binding materials to fill up the interstices of coarse aggregate, watering and compacting etc. complete as per Specification. (45 to 63mm size M.C. Metal).

Citizen's information board - Providing and fixing of typical MMGSY information board as per instruction. Two MS plates of 1.6 mm thick, of 900 mm x 750 mm size fixed at top & bottom, duly welded with MS angles of 25 x 25 x 5 mm thick. M.S plate shall be welded by two vertical M.S flats & four horizontal M.S flats 5 mm thick to 75 mm x 75 mm of 12 SWG square tubes posts duly embedded in cement concrete M-15 grade blocks of 600 mm x 600 mm x 75 mm, below ground level. Painting: New letters & figures of any shade with ready-mixed synthetic enamel paint of superior quality in required shade and color. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paints as per drawing Clause 1701 and Annexure 1700.1 (10.16).

MMGSY "LOGO" Board: Providing and fixing of MMGSY LOGO informatory sign board with logo as per section 1700 of MORD specifications and drawing. The board will be a composite unit consisting of two plates of ACM (Aluminum Composite Material), material specifications as per clause 17001.3. The topmost plate will be of 3mm ACP in diamond shape of 600x600mm size, riveted with MS angle iron frame of 25mmx25mmx5mm size on back on edges. The lower plate will be of 4mm ACP of 1100x300mm size riveted with MS angle iron frame of 25mmx25mmx5mm size on back on edges. Riveting of all the sheets over angle and flat iron frame will be done neatly to have a plain surface on one side. The angle iron frame of both the plates will be welded to a 75mm x 75mm x 6mm Mild steel post at centre and this post will be embedded in cement concrete M15 grade block of 450x450x600mm below ground level. The height of the bottom of the lower plate will be 1200mm from normal ground level. The spacing between the diamond-shaped plate and lower plate is kept 150mm. MMGSY logo, letters and numerals on the ACM should be made up of Retro Reflective sheeting of Type-1 AEGP Class-A grade as per the latest MORD section 1700 and IRC 67-2012.

MMGSY Project Information Board: Providing and fixing of typical PMGSY Project informatory sign board with Logo as per 1700 of MORD specifications and drawing. The board will be a composite unit consisting of three plates ACM (Aluminum Composite Material), material specifications as per clause 17001.3. The topmost plate will be of 3mm ACM in diamond shape of 600x600mm size, riveted with MS angle iron frame of 25mmx25mmx5mm size on back on edges. The middle 4mm ACM plate will be 1200x150mm size riveted with MS angle iron frame of 25mmx25mmx5mm size on back on edges. The main 4mm ACM lowermost plate will be 1500mmx600mm size, riveted with MS angle iron frame of 25mmx25mmx5mm size. Riveting of all the sheets over angle and flat iron frame will be done neatly to have a plain surface on one side. The angle iron frame of the lowermost plate and flat iron frame of the middle plate will be welded to two nos. 75mmx75mm (12 SWG) sheet tubes posts placed at 1125mm apart centre to centre. The top of the middle plate will be flushed with the top of 75mm dia medium steel tube posts and these posts will be embedded in cement concrete M15 grade block of 450x450x600mm below ground level. The height of the bottom of the lower plate will be 1200mm from normal.

Hazard Marker Sign: Providing and fixing signboards made out of 2.0 mm aluminum sheet / 4 mm ACP (Aluminum Composite Panel); size 90 x 30 cms. rectangular as per design of IRC-67-2012. Pretreated with phosphating process & acid etching; coated with one coat of epoxy primer and two coats of best quality epoxy paint; reflectorised with High Intensity Prismatic Grade retro reflective sheeting of Type-4 as per ASTM D-4956 and latest M.O.S.T. Specifications; 1.8 mtr long stand post of Iron Angle 75 x 75 x 6 mm / 65 NB Circular MS Pipe as required and frame fabricated from suitable size iron angle of 35 x 35 x 3 mm; painted with best quality epoxy coatings in black and white bends. The details of symbol for each board shall be as per the instruction of engineer in charge. The fixing at site shall be in 1:2:4 CC block of size 45 x 45 x 60 Cms. for each leg including excavation, curing etc. complete under the supervision of engineer in charge. A warranty for 7 years for the Retroreflective sheeting from original manufacturer & a certified copy of 3 year outdoor exposure test report from third party test lab for the product offered shall be submitted by contractor. (B) Class-B Type-4 Retro Reflective sheeting.

Providing and filling in foundation with ordinary cement concrete M-100 mix and providing necessary vertical pin headers including formwork, vibrating, ramming and curing complete.

Providing and filling in foundation with ordinary cement concrete M-150 mix and providing necessary vertical pin headers including formwork, vibrating, ramming and curing complete.

Providing TMT Bar FE 500/500D reinforcement for R.C.C. work including bending, binding and placing in position complete up to floor two level.

Providing and laying weep hole in a butment and return by using PVC pipe of 100 mm dia including laying in proper grade and joining complete etc. as per details specification.

Providing and laying fitter media 600mm thick directed at the back of abutments, returns and wing walls as per detailed specifications.

Demolition and disposal of unserviceable materials with all lead & lift. (ii) Unreinforced cement concrete.

Providing and casting in situ Controlled cement concrete M-250 for Cement Concrete Road laid as directed including tamping, vibrating, finishing, curing, and filling in joints with bitumen complete.

Compaction and finishing of cement concrete road by trimix process, providing extra labour charges for the trimix vacuum dewatering service process. Once cement concrete road surface by using vacuum dewatering pump, floaters, surface vibrator including making rough finish to surface as per in, including levelling the complete road.

Marking out the centre line of the bridge and various other component structures and complete lining out and levelling with theodolites, levels, including constructing and establishing necessary benchmarks etc. Complete as directed.

Excavation for foundation in sand, gravel, clay, soft soil, and murrum etc. including sorting, strutting & dewatering as necessary and disposing the excavated stuff as directed. (A) Depth up to 3.0 M.

Excavation in large boulders and soft rock by welding, including shoring, strutting and dewatering as necessary and disposing of the excavated stuff as directed.

Providing and casting in-situ ordinary cement concrete M-200 mix and providing necessary pin headers including shuttering, scaffolding, laying, vibrating, curing and finishing complete without V-grooves.

Providing and placing in position FE 500D bar reinforcement for the following items, including cutting, bending, hooking, and tying, complete as per detailed drawing.

Providing and casting in-situ controlled cement concrete M-250 for RCC work in pier caps/abutment caps & dirt wall including ordinary cement concrete M-250 bed block or pedestal of required size below bearings as per detailed drawings, centering, shuttering, scaffolding wherever necessary, laying, vibrating, curing and finishing complete.

Providing and casting in situ controlled cement concrete M-300 for R.C.C. solid slab including centering, scaffolding, curing and finishing complete.

Providing and casting in situ controlled cement concrete M-300 for RCC Crash Barrier including curing and finishing complete.

Providing and casting in-situ controlled cement concrete M-300 for average 75 mm thick wearing coat laid as directed including tamping, vibrating, finishing, curing, and filling in joints with bitumen complete.

Providing and casting in-situ controlled cement concrete M-300 for approach slab.

Providing and fixing in position mild steel 32mm dowel bars in pier caps for anchorage in fixings as per detailed drawing including cutting, bending, and welding complete.

Providing and fixing in position mild steel 32mm dowel bars in pier caps for anchorage in free ends as per detailed drawing including cutting, bending & welding complete.

Providing 12mm thick pre-moulded asphalt filler joints as per drawing.

Providing P.V.C. 100mm diameter water spouts including necessary iron gratings as per drawings.

Providing and fixing tar paper bearing shall be provided between abutment/pier cap and RCC slab.

Providing flood gauge marks on substructures as per design, including painting complete.

Providing diversion of road 3.75 m width for structure by providing & spreading earthwork, 200 mm unscreened GSB, 200 mm GSB-II and 20 mm MSS. The length of road is dependent on site condition etc as directed by Engineer in Charge. (The diversion shall be maintenance & repair in all weather seasons. No any extra payment shall be made for maintenance & repair work of diversion).

Wall painting (three coats) with plastic emulsion paint of approved brands like Apex or equivalent and manufacture on undecorated wall surfaces to give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matter and sandpapered smooth. (Black & White Strip).