Roads And Buildings Department Tender

Earthwork for embankment including breaking clods, dressing with all lead and lift. (Including watering and consolidation with vibratory roller 80 to 100 KN static weight). [A] From borrow pits/area with all lead & lift as per instruction of engineer in charge..

Providing & Laying Bituminous Grout 37.50mm thick compacted with bitumen of grade of VG-30 at rate 1.99% by weight of mix for mixing and Emulsion Asphalt grade RS-1 to be used @ 2.50 kgs./ 10 Sq.m. for tack coat on Existing B.T. surface and using B.T. chips of required gradation including cleaning and heating asphalt pre mix materials by hot mix process in proper gradation and laying with paver finisher and consolidation work as per M.O.R.T.&H specification including cost of labour, materials and plant, fuel, oil, kerosene, labour charges etc. complete using contractor's own machinery drum mix plant & paver finisher etc. complete..

Providing & Laying Bituminous Grout 37.50mm thick compacted with bitumen of grade of VG-30 at rate 1.99% by weight of mix for mixing and Emulsion Asphalt grade RS-1 to be used @ 4.00 kgs./ 10 Sq.m. for tack coat on Existing B.T. surface and using B.T. chips of required gradation including cleaning and heating asphalt pre mix materials by hot mix process in proper gradation and laying with paver finisher and consolidation work as per M.O.R.T.&H specification including cost of labour, materials and plant, fuel, oil, kerosene, labour charges etc. complete using contractor's own machinery drum mix plant & paver finisher etc. complete..

Providing & laying 25mm thick premixed asphalt carpet using 0.66 cmt aggregate per 1 M.T of total mix as per MORTH gradation and specification and Emulsion Asphalt grade RS-1 to be used @ 2.50 kgs./10 Sq.m. for tack coat & asphalt grade VG-30 @ 33.60kg. per M.T. of Total mix (i.e 3.36%) for mixing the aggregate and asphalt by continuous batching of Drummix plant including loading, transporting and spreading the same by paver finisher and consolidation by Vibratory Roller 80 to 100KN static weight including providing necessary equipments, T&P, oil, kerosene, firewood, labour charges etc. complete with contractor's own machinery..

Providing & laying bituminous 0.18 cm t/10 sm t Seal Coat using M/C stone aggregate at the rate of 0.66 cum/M.T. and asphalt VG-30 for mixing @ 45.00 kg. per M.T. of total mix (i.e 4.50%), mixing by continuous batching of Drummix plant & spreading the same by paver finisher and consolidation by Vibratory roller 80 to 100 KN static weight including flushing stone dust @ rate of 0.30 cm t/ 100 sm t. etc. complete including T & Ps, firewood, oil, fuel, labour charges etc. complete using contractor's own machinery.

Excavation for foundation in sand, gravel, clay, soft soils and murrum etc. including shoring, strutting, dewatering as necessary and disposing of the excavated stuff as directed. (A) Depth upto 3.0 M. and lead upto 100m.

ProvidingandcastinginsituOrdinarycement concreteM-150forR.C.C.Raftandcut-offwalls includingnecessaryshutteringlaying,vibrating, ramming and curing complete.

Providingandcastingin-situcontrolledcement concrete M 200 for R.C.C raft and cut off walls including necessaryshuttering,layingvibrating,rammingand curing complete.

Providing & Fixing in position T.M.T. Fe-500 D bar reinforcement including cutting, bending and tying complete as per detailed drawings. for all type of R.C.C. work.

providing and laying weep holes in abutment and return by using A.C. pipes of 100 mm diameter with laying in proper grade and jointing complete etc. as per detailed specification.

Fillingavailableexcavatedearth(excludingrock)in trenchesplinth,sidesoffoundationsetc.inlayersnot exceeding 20cm. in depthconsolidating each disposited layer by ramming and watering.

Providing and fixing ordinary Kilometer stone of precast C.C. 1:2:4 including necessary reinforcement as per I.R.C. type design in C.C. 1:4:8 including painting, lettering etc. complete.

Providing & fixing Hecto metre stone as per I.R.C type design including painting, lettering etc. complete. (i) Fixing in C.C. 1:5:10 etc. complete..

Providing & fixing Guard stone of pre cast / Cast in situ in C.C.M-150 including necessary reinforcement & oil painting as per drawing & fixing in C.C. 1:5:10 etc. complete..

Providing & fixing junction signboard made of 4mm ACP sheet size 120x90cms rectangular with message on both side of the board, as per the design of IRC, pretreated with Phosphetic Process & acid etching with One coat of epoxy primer and two coats of best quality epoxy paint, front side reflectorised with High Intensity Micro Prismatic Grade Type-IV retro reflective sheeting, as per the IRC 67 and latest MOST specification and backside massage/lettering shall be painted with ready mixed synthetic enamel paints of superior quality in required shade and color as specified, mounted on 2 No. of 3.1mt. long stand post of iron angle 50x50x6mm and frame fabricated from suitable M.S. Angle of 40x40x3mm as required, painted with best quality epoxy coating in black and white bends. The details of the letters/symbols for board shall be as per instruction of engineer in charge. The fixing at site shall be in 1:2:4 CC block of side 45x45x60cms for each leg, including excavation, curing etc complete under the supervision of Engineer in charge.

Village name/ Bump Ahead sign :- Providing and fixing sign boards made out of 16 gauge 1.6mm GI Sheet ; size 90x60cms. rectangle as per the design of IRC-67-1977 pretreated with phosphating process & acid etching; coated with one coat of epoxy primer and two coats of best quality epoxy paint; reflectorised with retroreflective sheeting as per latest M.O.S.T. Specifications; Letters and numerals should be as per IRC-30-1968, 3.1m long (2 nos) stand post and frame fabricated from suitable size iron angle of 50 x 50 x 5mm painted with best quality epoxy coatings in black and white bends. The details of symbol or inscription/numerals for each board shall be as per the instruction of engineer in charge. The fixing at site shall be in 1:2:4 CC block of size 45x45x60cms. for each leg. including excavation curing etc. complete under the supervision of engineer in charge. (A) Engineer Grade..

Cautionary / Warning Sign: Providing & Fixing signboards made out of 2mm aluminum sheet ; size 90x90 x90 cms. equilateral triangle as per design of IRC - 67-1977. Pretreated with phosphating process & acid etching ; coated with one coat of epoxy primer and two coats of best quality epoxy paint; reflectorized with retroreflective sheeting as per latest M.O.S.T. Specifications: 3.1m. long stand post and frame fabricated from suitable size iron angle of 35 x 35 x 3 mm, 75x75x6 mm s. required; painted with best quality epoxy coatings in black and white bends. The details of symbol for each board shall be as per the instructions of engineer in charge. The fixing at site shall be in 1 : 2 : 4 CC block of size 45 x 45 x 60 cms. for each leg. Including excavation, curing etc. complete under the supervision of engineer in charge. (A) Engineer Grade..

Informatory Signs: - Providing and fixing sign boards made out of 2 mm aluminium sheet; size 80 x 60 cms. rectangle as per the design of IRC-67-1977 pre-treated with phospheting process & acid etching; coated with one coat of epoxy primer and two coats of best quality epoxy paint; reflectorised with retro-reflective sheeting as per latest M.O.S.T. Specifications; 3.1 m long stand post and frame fabricated from suitable size iron angle of 35 x 35 x 3 mm 75 x 75 x 6 mm as required; painted with best quality epoxy coatings in black and white bends. The details of symbol for each board shall details of symbol for each board shall be as per the instruction of engineer in charge. The fixing at site shall be in 1:2:4 CC block of size 45 x 45 x 60 cms. for each leg. Including excavation curing tec. complete under the supervision of engineer in charge. (A) Engineer Grade (VR).

Road marking with hot applied thermoplastic paints with reflectorising glass beads on bitumen surface providing and laying a hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sq m area, thickness of 2.5 mm is excluding of surface applied glass beads as per IRC:35-2015. The finished surface to be level, uniform and free from streaks and holes. zebra patta / bump patta lane / centerline / edgeline / cut patta. The white color marking should provide luminance coefficient on cement roads shall be min 130 mcd/m2/lux and Asphalt road shall be min 100 mcd/m2/lux during the service life during the daytime. The markings should meet the performance criteria for night time reflectivity, wet reflectivity and skid resistance as mentioned in the section - 15 of IRC 35 - 2015. Warranty for the Retroreflectivity should be two years..

Supplying and fixing cat eye (Stimsonite) made out from Acrilobeautilesterineinjuctionhighcompressedmolding with reflector made of MMC (prismatic type of size 12cmx6cmx2.5cm) provided with bituminous adhesive 100g. with each unit for fixing. (High Intensity grade).

Facility Informatory Sign: - Providing and fixing sign boards made out of 2mm aluminium sheet / 4mm ACP (Aluminum composite Panel); size 80x60cms rectangular as per design of IRC-67-2012. Pretreated with phospheting process & acid etching; coated with one coat of epoxy primer and two coats of best quality epoxy paint; reflectorised with Micro Prismatic Grade retro reflective sheeting of Type-11 as per ASTM D-4956 and latest M.O.S.T. Specifications; 3.6mtr long stand post of 75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame fabricated from suitable size iron angle of 35x 35 x 3mm; painted with best quality epoxy coatings in black and white bends. The details of symbol for each board shall be as per the instruction of engineer in charge. The fixing at site shall be in 1:2:4 CC block of size 45x45x60Cms. for each leg. including excavation, curing etc. complete under the supervision of engineer in charge. A warranty for 10 years for the Retro reflective sheeting from original manufacturer & a certified copy of 3 year outdoor exposure test report from third party test lab for the product offered shall be submitted by contractor. (A) Class-C Type-11 Retro Reflective sheeting.

Type - A, "W" : Metal Beam Crash Barrier (Providing and erecting a "W" metal beam crash barrier comprising of 3mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 810).