Roads And Buildings Department Tender

Providing and laying Granular Sub-Base Grade I by providing course graded material conforming to Table 400-2 of MOST specification of grading I, using material combination of crushed aggregate, stone dust etc. as required gradation including spreading, watering & consolidation by vibratory roller in grade and camber as directed.

Providing, laying 25 mm thick compacted bituminous carpet considering 0.66 cm t./ 10 sq.mt. stone chips for one sq.mt. as per specification, using the asphalt VG-30 at a rate 33.60 Kg/sq.mt. (i.e., 3.36% by weight of total mix) and asphalt VG-30 for tack coat at a rate 2.5 Kg/ 10 sq.mt. including heating and mixing the asphalt and stone aggregates by continuous batching of drum mix plant and transporting and spreading the same by MANUAL LAYING and consolidation with vibratory roller with necessary equipment, soil, kerosene, firewood, labour charges etc. complete with contractor's own machineries and equipment, toolsetc. complete in accordance with the requirement.

Providing and laying seal coat with B.T. aggregate as specified, using aggregate at the rate of 0.18 Cu.m./10 Sq.m. and bitumen grade VG30 for mixing with aggregate at the rate of 4.50% i.e. 45.00 Kg./M.T, including heating & mixing in hot/drum mix plant & transporting & spreading the same by MANUAL LAYING & consolidation with vibratory roller incl. necessary firewood, oil, lubricants, labour charges etc. using contractor's own drum mix plant, machineries & equipment, tools etc. complete in accordance with the requirements of specification.

Providing & Fixing Hectometer stone as per I.R.C. type design including painting, lettering etc. complete (i) Fixing in C.C. 1:5:10.

Place identification sign: Providing and fixing signboards made out of 2mm aluminum sheet; size 150 x 90 cms. rectangle as per the design of IRC-67-1977 pretreated with phospheting process & acid etching; coated with one coat of epoxy primer and two coats of best quality epoxy paint; reflectorised with retroreflective sheeting as per latest M.O.S.T. Specifications; Letters and numerals should be as per IRC-30-1968, 3.1m long (2 nos) stand post and frame fabricated from suitable size iron angle of 50x50x5mm 75x75x6mm as required; painted with best quality epoxy coatings in black and white bends. The details of symbol or inscription / numerals for each board shall be as per the instruction of the engineer in charge. The fixing at sites shall be in 1:2:4 CC block of size 45x45x60 cms. for each leg. Including excavation, curing etc. complete under the supervision of the engineer in charge. (A) Engineer Grade (VR)...