Roads And Buildings Department Tender

Hire charges for providing, erecting, and dismantling after use of a good running condition 600mm/900mm heavy-duty air-circulator pedestal type fan of good running condition.

Hire charges for providing a temporary plug point with a 5/15 Amp plug switch combined, erected on a wooden board complete.

Hire charges for providing, erecting and dismantling after use, in good running condition, with necessary interconnecting wire/cable on panel board (R) MCB Distribution boards. Three phase 230V, (i) 4-6-8 Way.

Hire charges for providing, erecting, and dismantling (after use in good running condition). Section pillar fabricated from 16 SWG thick M.S. sheet with 40 x 40 x 6 mm thick angle iron legs with 12 mm thick bakelite/wooden sheet erected complete with the following sizes: (b) Section pillar having size 75 x 60 x 45.

Hire charges for providing & dismantling pipe type earthing for temporary electrical installation having G.I. pipe, erected in earth pit with necessary salt & charcoal & necessary earth wire.

(C) 2 wire 4 /6 Sq.mm Copper

2-wire 4/6 sq.mm Aluminium

(G) 4 wire 6 Sq.mm Copper

Hire charges for providing, erecting as per direction of Engineer in charge, dismantling after use of good running condition for temporary power supply the XLPE insulated armoured cable Aluminium conductor of following size. (B) 4 Core 4/6/10 Sq.mm.

(E) 3 1/2 Core 50 / 70 Sq.mm

(F) 3 1/2 Core 95 / 120 Sq.mm

(G) 3 1/2 Core 150 / 185 Sq.mm

Hire charges for providing, erecting as per direction of Engineer-in-charge, dismantling after use of good running condition for temporary power supply, the XLPE insulated armoured cable multi-strand copper conductor of following size (C) 4 Core 16 Sq.mm.

Hire charges for providing, erecting with necessary connection and dismantling after user of good running ELCBs/RCCBs conforming to IS 12640 and having sensitivity of 30mA and short circuit withstand capacity of 6kA and suitable for operation on 3 Phase and neutral 415V having characteristic of quick action & tripping with all advance feature & do not incorporate any electronic component for following Max rating (A) 40 Amps FP [Cat. II].

Hire charges for providing, erecting with necessary connection and dismantling after use of good running Approved make Four Pole LT Heavy Duty Switch Disconnector Fuse Unit Cubical type for panel mounting complete with operating mechanism suitable to operate on 415 V AC 23A duty with HRC fuses of suitable load confirming to I.S 13947 (Part I & III) of following capacities. (G) 400 Amp [Cat. II].

Hire charges for providing, erecting with necessary connection and dismantling after user of good running. Supplying & erecting approved make four-pole 415V changeover switch interior for panel mounting with operating mechanism A.C. 230V duty confirming to I.S.S. for (D) 200A [Cat. II].

Hire charges for providing & erecting weatherproof, dust & vermin-proof/floor-mounted front-operated outdoor type cubical panel board having IP64 protection made from 14 SWG thick CRCMS sheet for outer body and doors, 16 SWG thick CRC MS sheet for internal partition with necessary supporting angles, flats including cutting, bending, drilling, welding, revetting, with internal partition and cable alley as per requirement & instruction of Engineer in charge with SUPPLY AND ERECTION of following type switchgears/busbars with suitable size of interconnecting PVC copper wire/copper strips, rubber grommets, rib, earth bus and earth bolt, foundation flange bolts, base plates, sufficient Nos. of hinged doors, handles with locking arrangement & rubber gasket complete. The panel shall be painted with epoxy powder coating and have Cu. Busbar strips. Each busbar should be insulated by color-coded sleeve. WITH PHASE INDICATING lamps, Digital Multifunction meter (Voltage, Amperes & Frequency only) with CT coils. Each panel will contain earth bus and earth bolts with danger notice board. [A] Cubical panel with main interior.

CAU 4B IP Panel with load changeover switch and 250A SFU/MCCB with four nos of 40A DPMCB and four nos of 40A FPMCBas standard outgoing. Other outgoing is to be incorporated as demanded by the engineer in charge and the rate for the same is to be taken extra in addition to this.

Hire charges for providing, erecting, and dismantling after use of a good running condition 14" flexible 600 GSM SRF duct for ductable type AC machine, as per the instructions of the engineer in charge.

Hire charges for providing, erecting and dismantling after use of a good running tower type/split type air-conditioning machine complete with erection, gas charging, etc. (a) 1.5-2 ton for one day as per the instruction of the engineer.

Hire charges for providing, erecting and dismantling after use of good running condition Tower type/split type Air-conditioning machine complete with erection, gas charging etc. (b) 3/4/5 Ton for one day as per instructions of engineer.

Hire charges for supplying and erecting 19/20mm nominal bore Medium Class M.S. Pipe, down rod erected with fan clamp/hook, duly painted for fan complete with necessary 24/0.20, 3 core flexible wire with earthing and installed in a proper way to ensure vibration-free movement.

Hire Charges for Providing, erecting, & commissioning & dismantling AHU (Air Handling Unit) for circulating air as part of air conditioning system up to 34 ton i.e four units of 8.5 ton.

Hire charges for LED flood light fittings with high-power white LEDs, wattage of 1 watt and above, assembled on a single MCPCB. Efficiency more than 130 lm/w and corrosion-free high-pressure die-cast aluminium housing with a smooth finish powder coated and heat sink extruded aluminium with diffuser and polycarbonate optics/lenses with company mark/name engraved or embossed. 120 to 300V, power factor more than 0.95, THD < 10%, CCT 5000K to 5700K, uniformity ratio > 0.45, luminaire efficiency > 85 lumens/Watt, LED driver efficiency > 85%. Cree/Osram/Philips Lumileds/Nichia/Seoul/Bridgelux (U.S.A.) make LEDs used for luminaire. (Each fitting required LM-79 & LM-80 Certificates) (B) Flood Light (IP-65), Surge -4KV (e) Above 150 watts to 240 watts Cat-III.

Hire charges for providing & dismantling an earth pit of minimum bore dia. 150 mm size, approved make Earthing Electrode consisting of Pipe-in-Pipe Technology as per IS 3043-1987, made of corrosion-free G.I. Pipes having outer pipe dia of 50 mm having 80-200 micron galvanizing, inner pipe dia of 25 mm having 200-250 micron galvanizing, connection terminal dia of 12 mm with constant ohmic value, surrounded by highly conductive compound with high charge dissipation, suitable for the following type of applications: (a) For Electrical Installation up to 440V in normal soil. Length of pipe - 1 Mtr. Back filling compound - 1 Nos Bag of 15 Kg.

Hire charges for providing, erecting, and dismantling after use of a good running condition Industrial Air Cooler with water filler, erected as per instructions of the engineer-in-charge.

Hire charges for 440 VA C generating set following capacity with necessary fuel, mains, switchgears & accessories complete running on load/no load with acoustic soundproof enclosure etc as per requirement. With transportation charges up to 30 kms. [F] 125 KVA.

[G] 250 KVA

Hire charges for providing and erecting the Iron Scaffold towersofsize5'x5'-0"x25'-0"(High)withnecessary supports and cross arms with necessary accessories as per requirementonsiteforerectionofhornsandhalogen fittings as directed