Roads And Buildings Department Tender

Scarifyinggravelledmacadamorbitumen macadamsurface6cmto10cm.depth includingstackingusefulmaterialsonroad side and disposing off remaining stuff.

Supplying, Stacking, Spreading & rolling of hard murrum on roadside for hard side shoulder of work as per specification including filling the measure boxes of standard size etc. complete.

Providing, laying, spreading and compacting stone aggregate 45mm to 90mm size to WBM Grade I single layer 100mm thick in required layer including spreading in uniform thickness hand packing rolling with vibratory roller 8 to 10 tonnes to proper grade and camber applying and brooming rerusite type of screening binding filler material to fill up the interstices of course aggregate wearing and compacting to the required density Grading I using screening Type B (13.2mm stone aggregate) etc. complete..

Providing & laying bituminous base course 37.5 mm thick compacted in single layer asphalt VG-30 grade at 1.99 % by weight of mix for mixing and asphalt VG-30 for tack coat @ 4.0 kg / 10 sq m using B.T. chips of required gradation including cleaning and heating asphalt, premix material by drum mix process in proper gradation and laying with paver finisher including rolling and consolidation with 8-10 tonne vibratory roller and providing all material equipment, tools, and plants, firewood, oil, kerosene labour charges etc. complete using contractor's own machineries, drum mix plant and paver finisher etc. complete..

Providing and laying asphalt painting on B.T. surface with bitumen VG-30 at a rate of 5 Kg/10 sq mt. of bitumen and spreading stone dust on painting surface at the rate of 0.03 Cu. mt /10 Sq mt..

Providing and fixing ordinary Kilometer stone of precast CC 1:2:4 including necessary reinforcement as per I.R.C. type design in C.C. 1:4:8 including painting and lettering etc. complete (For O.D. Road, V.R.).

Providing & Fixing Hectometer stone as per I.R.C. type design including painting, lettering etc. complete (i) Fixing in C.C. 1:5:10.

Road marking with hot applied thermoplastic paints with reflectorising glass beads on bitumen surface providing and laying a hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads @ 250gms per sqm area, thickness of 2.5mm is excluding of surface applied glass beads as per IRC:35- 2015. The finished surface to be level, uniform and free from streaks and holes. zebra patta/ bump patta lane/ centerline/ edgeline/ cut patta. The white color markings should provide luminance coefficient once mend roads shall be min 130mcd/m2/lux and Asphalt road shall be min 100 mcd/m2/lux during the service life during the daytime. The markings should meet the performance criteria for night time reflectivity, wet reflectivity and skid resistance as mentioned in the section-15 of IRC 35-2015. Warranty for the Retroreflectivity should be two years..

Supplying and fixing reinforced concrete heavy duty non-pressure pipes with collars for culverts carrying heavy traffic as per IS458-1991 specifications including setting the pipes in C.M. 1:2 watering and laying (to level or slopes) of class NP3 of following internal diameters. (iii) 600mm dia.

Supplying, fixing & joining reinforced concrete heavy duty non-pressure pipe with collars for culverts carrying heavy traffic as per IS 458-1991 specification including setting and joining the pipe in cement mortar 1:2 watering or laying of class NP-3 900 mm dia.

Providing and filling in foundation with ordinary cement concrete M-100 mix and providing necessary vertical pin headers including formwork, vibrating, ramming and curing complete.

Providing and casting in situ ordinary cement concrete M-150 mix and providing necessary pin headers including shuttering, scaffolding, laying, vibrating, curing and finishing complete without V-Groves. (A) Height from 0.0 M. to 5.0 M.

White washing with lime on wall surface (two coats) to give an even shade including thoroughly booming the surface to remove all dirt, dust; mortar drops and other foreign matter.

Providing and laying in position FE 500/500 DTMT bar reinforcement including cutting, bending, hooking and tying complete as per detailed drawings for the following: (A) Piers (B) Abutments (C) R.C.C. Returns.

Providing and laying weep holes in abutment and return by using A.C. pipes of 100mm diameter with laying in proper grade and jointing complete etc. as per detailed specification.

Providing and filter media 600 mm thick as directed at the back of abutment returns & wingwall as per detailed specification.

Demolition of brick work and stone masonry including stacking of serviceable materials and disposal of unserviceable materials with all lead and lift. (i) In Lime Mortar.