Pandit Deendayal Energy University Tender
Search for the latest Gujarat tenders online related to civil works, road & transport, pipelines and more easily here on BidAssist. Here you can get any and every tender that is posted on the eProcurement Gujarat website, minus the clutter. No need for a tender ID, as on BidAssist, you can view any Gujarat tender by merely typing Gujarat in the search box.
Pandit Deendayal Energy University - PDEU Tender
Civil And Construction
Nprocure
Opening Date16 Feb 2023
Closing Date28 Feb 2023
Tender Amount₹ 4,26,16,857
Costs
EMD
₹ 5,00,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Extension Of A Wing In Block E At Pdeu Campus, Gandhinagar
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
577155Tender No
PDEU/22/23/001Tender Authority
Pandit Deendayal Energy University ViewPurchaser Address
-
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Providing and laying in position machine mixed, machine batch, machine vibrated, design mix cement concrete for reinforced cement concrete work of M25 grade using graded black trap stone aggregates of maximum 20mm nominal (down graded) size obtained from approved quarry including fine aggregates conforming to latest IS 383 with minimum cement content (without fly ash) for durability shall be followed as per approved design mix and latest IS 456 (whichever is higher) for all elements of any shape and size, at all places and heights/ depths including transporting to site continuous agitating mixer, laying of concrete to site by any means like pumping or tower crane etc., vibrating, finishing and curing etc. and including Admixtures in recommended proportions as per IS 9103 to accelerate, retard setting of concrete, to improve workability without impairing strength and durability as per direction of Engineer-in-charge. Rate shall be inclusive of providing grooves, drip moulds, ghisis, pockets, cutouts etc. and labour for insert sleeves if any wherever required while casting. Rate also to include lift charges and scaffolding for all heights / depths. (for all civil, plumbing & electrical works) but excludes the cost of formwork & reinforcement. The formwork and reinforcement shall be paid in relevant tender items.
397
-
-
... More
Providing and laying in position machine mixed, machine batch, machine vibrated design mix cement concrete for reinforced cement concrete work of M30 grade using graded black trap stone aggregates of maximum 20mm nominal (down graded) size obtained from approved quarry including fine aggregates conforming to latest IS 383 with minimum cement content (without fly ash) for durability shall be followed as per approved design mix and latest IS 456 (whichever is higher) for all elements of any shape and size, at all places and heights/ depths including transporting to site continuous agitating mixer, laying of concrete to site by any means like pumping or tower crane etc., vibrating, finishing and curing etc. and including Admixtures in recommended proportions as per IS 9103 to accelerate, retard setting of concrete, to improve workability without impairing strength and durability as per direction of Engineer-in-charge. Rate shall be inclusive of providing grooves, drip moulds, ghisis, pockets, cutouts etc. and labour for insert sleeves if any wherever required while casting. Rate also to include lift charges and scaffolding for all heights / depths. (for all civil, plumbing & electrical works) but excludes the cost of formwork & reinforcement. The formwork and reinforcement shall be paid in relevant tender items.
11
-
-
... More
Providing and wet drilling accurate and clean holes of specified diameter in RCC walls, slabs, beam or any other RCC member without vibration by core cutting (diamond drilling) machine of approved make for laying service lines including scaffolding, safety majors, disposing the debris, cleaning, making good, providing epoxy mortar/ micro concrete/ patch repair mortar/ Non shrink grout for concrete for grouting the gaps around the pipes for all levels/ all height, after approval of engineer in charge etc compete. Measurement shall be taken for the depth of holes in running meter for specified diameter. Holes shall made by authorized approved agency. Scanning of reinforcement shall be carried out before core cutting if required and as suggested by Engineer in charge. Location of core cutting shall be approved by Engineer in charge. a) Diameter of holes of 52 mm clear
11
-
-
... More
Diameter of holes up to 77 mm clear
11
-
-
... More
Diameter of holes up to 102 mm clear
11
-
-
... More
Diameter of holes up to 152 mm clear
11
-
-
... More
Providing in position rigid PVC pipe sleeves of 6Kg/cm2 and length as per design for following diameters for services wherever pipes pass through walls/ slabs/ beam before concreting. All pipes shall be accurately cut to the required sizes, laid as per drawing, kept in the position while laying reinforcement and shuttering, sleeves shall not get displaced while concreting, and burrs removed before laying. Open ends of the pipe shall be closed as the pipe is installed to avoid clogging while concreting. Measurement shall be taken up to two decimal. (minimum 0.01 mt.). Rate shall be inclusive of removal of sleeves before water proofing or grouting. For all floors/ all levels/ all heights. Location of sleeve shall be approved by Engineer in charge. a) 75mm diameter
11
-
-
... More
110mm Diameter
11
-
-
... More
160mm Diameter (QRO Item)
11
-
-
... More
200mm Diameter (QRO Item)
11
-
-
... More
Section 3.00 Centering & Form Works Providing ordinary formwork with shuttering plywood/ steel sheathing and steel supporting system so as to give fair finish, including centering, shuttering and propping, etc. complete, height of propping and centering below supporting floor to ceiling not exceeding 5.0 m., and removal of the same for in-situ reinforced concrete, in foundations, footings, bases of columns, walls, columns, slabs, beams, sills, lintel, coping, stair etc. for all heights, levels, shapes and locations. (for all civil, plumbing & electrical works).
2996
-
-
... More
Section - 4.00 Masonry Works Providing and laying Bricks masonry works using common burnt clay conventional building bricks confirming to IS 1077-1986 of having crushing strength not less than 35 Kg/cm2 including curing, scaffolding, racking / flush jointing etc. complete, as directed. (For all civil, plumbing & electrical works). b) Super structure above plinth for all levels, location, shapes etc. i) C.M 1:5
336
-
-
... More
Providing and laying Half brick, 115 thick masonry using common burnt clay conventional building bricks confirming to IS 1077-1986, having crushing strength not less than 35 Kg/cm2, for all floors / all heights / all levels, in any shape, in any position, including curing, scaffolding, etc. complete, as directed (for all civil, plumbing & electrical works). ii) C.M 1:4
216
-
-
... More
Section 5 - Doors & Window Aluminium Work : Providing and fixing in position frames/ shutter for any type of aluminium work like aluminium door, composite door-window, window (sliding, openable, side hung, top hung, fixed etc.), casement window, aluminium partition, aluminium fixed louvers, fixed window with any type of aluminium sections of make Jindal/ Indal/ Hindalco as per approved make having minimum 50 micron pure polyester powder coating of approved shade, texture & colour of approved make for all floors/ all levels/ all heights/ all shapes/ all sizes including cutting, bending, crimping, fabricating in best workmanship manner etc as per the drawing, specification and as directed by Architect or Engineer-in-Charge. Rate shall be inclusive of providing aluminium sections (conventional and/ or Euro-profile sections), cutting, fabrication, errection and fixing to the best workmanship manner, including : 1) Sheet metal screws and casted solid aluminum corner cleats fixed with external byttins with a spring for rapid and secure joint assembly for casement and sliding shutter and frame; 2) Glazing clips for receiving infill panel; 3) Best quality wool pile where ever shutter touches the frame and compatible microwave cured EPDM rubber; 4) Dash Anchor fasteners of HILTI or equivalent for fixing the frame assembly to the RCC or masonry surfaces. Minimum 1 anchor fastener shall be used for every 600 mm length of section for stability of frame. 5) 10mm GI tie rod for connecting vertical stile at top and bottom for aluminum door shutter and 4mm thick solid aluminium corner cleat of full thickness of section for connecting style and horizontal rails; 6) providing and fixing packing at every 600mm c/c of average 6 mm compact sheet of width (equal to section width less 30mm for backer rod and sealant); 7) Filling the gap between wall and frame on both sides (outside and inside) with polyethylene baker rod of avg. 10 mm thickness of approved make and color and then sealing the remaining gap with neutral grade G/M (Glazed & Metal) weather silicon sealant of approved make and color. 8) Termite treated seasoned teak wood as infill material to installed hardware in door shutter and frame as and when required but excluding. 1) necessary hardware; 2) Glazing or paneling material and shutter. Shop drawing shall be prepared and get approved from the consultants before procurement of material by the contractor. Work shall carried out as per the approved shop drawings and approved sample. Actual weight of installed Aluminium sections which are visible shall only be measured and shall be considered for the payment. Contractor shall provide guarantee for stability, water tightness etc for 12 months after defects liability period.
2318
-
-
... More
Providing and fixing glazing with 6mm thick clear toughen glass of specified thickness in aluminium door, window, ventilator shutters and partitions etc. Including EPDM rubber on the periphery of the glass, snap beading, glazing clips, neutral cure weather Silicone sealant of Dow corning 789 of approved shade etc. complete for all height / all levels / all floor in all shapes as per the architectural drawings and directions of engineer-in-charge. Installed area of glass shall be measured and paid and without any wastage. In case of half round/ round shape windows, rectangular/ square area shall be measured and paid.
161
-
-
... More
Providing and fixing 6 mm thick wired glass of approved make and specified thickness in frame work with necessary cutting of glass as per approved shop drawing & specifications including providing and fixing EPDM quality rubber on the periphery of the glass, snap beading, glazing clips, neutral cure weather Silicone sealant of Dow corning 789 etc. complete etc. complete for all floors, all levels, all heights and in all shapes as per the directions of Architect/ Engineer-in-charge. Actual installed area shall be measured and paid. In case of half round/ round shape windows, rectangular/ square area shall be measured and paid.
32
-
-
... More
Providing and fixing aluminium operable system louvers of 50 micron Pure Polyester Powder Coating of approved shade & colour and texture manufactured by Technal, Domal or equivalent with operating mechanism frame louver with gasket and piles. The corner joints of the frame shall be made at 45 degree using die-cast solid aluminium corner cleats fixed with external byttins with a spring for rapid and secure joint assembly. Gaskets shall be of EPDM material. Work shall be carried out in the existing door/ window frame as per sample approved by Architect / EIC. Operating panel should be provided as per drawing. Actual (out to out dimension of louver frame) measurement of system with louvers shall be measured and paid in sqmt. Rate should be inclusive of aluminium sub frame for housing operating system. Contractor shall prepare shop drawing with design calculation considering all parameter and submit to concern authority suggested by client for structural approval. And architectural approval shall be given by consultant.
29
-
-
... More
Providing and fixing laminated Compact Sheet of any size, any shape, any color, any texture as per approved sample (approved by architect) and specified thickness in aluminium frame and shutter work with necessary cutting of sheet, single side, double side coloured as per drawing & specifications including providing and fixing EPDM quality rubber/ silicon sealant/ adhesive tape/ screwing on the periphery of the sheet as per the required thickness etc. complete at all floors/ all levels/ all heights as per the drawing & directed by EIC / Architect. Cut edges of the compact sheet shall be provided with masking tape. Actual installed quantity shall be measured and paid. Rate shall be inclusive of all type of wastage.
30
-
-
... More
Hardware (General Note) : General Notes for Hardware: Supplying and fixing heavy quality fixtures and fittings for doors, windows, ventilators, partition wall, cabinets with necessary screws, nails, machine pins etc. at all floor/ all levels/ all heights complete. The fittings and fixtures hardware as described in items or of make approved by Architect. Sample shall be approved before execution. As per description, SS hardware shall be of 304 grade or 316 grade according to approved make. The fixture & fastenings shall be provided as under: Providing & fixing single/ double action hydraulic floor spring with SS cover plate & adjustable concealed casted top pivot (two piece) and bottom strap of approved make for wooden/ aluminium doors of specified capacity with minimum one year guarantee. Rate shall be inclusive of cutting of floor neatly, grouting the floor spring & cleaning/ polishing the floor & maintaining in good working condition until defect liability period. In case of Aluminium shutter bottom arm of floor spring & top pivot shall be firmly fixed in the aluminium members using required size of teak wood by making rabbet in the wood. The Floor Spring shall conform to EN 1154. a) Hold open having weight up to 100 kg and width up to 1200mm with std. spindle and cover plate. Closing force complying with EN 1154 2 - 4
13
-
-
... More
Providing & fixing set of narrow style dead lock dead lock for single/ double shutter door, with 25/ 35mm backseat, 20mm square for end with 72 mm centers including strike plate ss 304 in brass finish as per DIN 18251-1, grade 2 and prepared for euro profile cylinder (EPC) including strike plate and EPC length 60/70 mm standard Euro profile Pin Cylinder/ Half pin cylinder of approved make with both side key/ one side key one side knob/ slot operation with pair of Brass/ SS 304 Escutcheons (key hole plate) of approved for wooden doors with necessary SS Phillips head screws etc complete as per drawing and sample approved by engineer in charge. Rate shall be for all heights, all floors and all places. The lock shall be with 3 keys.
13
-
-
... More
Providing & fixing SS 304 grade push-pull pair of handle made out of satin (brush) finish hollow pipe of 1.0mm thick having offset (C or D shape)/ H-shape/ D-shape of approved make with necessary screws etc. complete for wooden doors/ aluminium doors/ metal doors as per drawing as approved by Architect and Engineer-in-charge. Rate shall be for all heights, all floors and all places. The length of handle should be perfect center to center as below specified. a) 600 mm long x 22 mm dia
13
-
-
... More
Section - 7.00 Plastering Works Providing and laying average 10 mm thick single coat mala finish plaster in CM 1:3, on ceilings and stair soffits at all floors, all shapes and all heights with necessary scaffolding, curing, making grooves, forming pattas, hacking properly RCC surface etc. complete as directed by the Architect and Engineer-in-charge. (for all civil, plumbing and electrical works)
2521
-
-
... More
Providing & laying average 18 mm thick mala finish cement plaster in two coats on sides of masonry work / block wall / RCC wall at all heights, all shapes and all levels with 12 mm thick under coat in CM 1:4 (1 cement : 4 coarse sand) rough wired finish and 6 mm thick finishing coat in CM 1:3 (1 cement : 3 fine sand) mala finish (finished with steel trowel) including scaffolding, finishing, curing, making grooves, forming pattas and drip mould, hacking RCC surface etc. complete, as directed by Engineer-In-charge.
1654
-
-
... More
Providing and laying average 18-20 mm. thick Sand face cement plaster on walls up to any height above ground level and for all shapes consisting of average 12-15 mm. thick backing coat of CM 1:4 (1 cement: 4 coarse sand) and average 6 mm. thick uniform grained textured finish coat by using any means, in CM 1:2 (1 cement: 2 sand), including scaffolding, forming grooves, drip moulds, pattas, hacking RCC surface, curing etc. complete (for civil, plumbing & electrical works).
1080
-
-
... More
Providing and fixing G.I. hexagonal chicken mesh of size 20mm x 20mm of 22 gauge at junction of concrete and brick work or between different materials after making "V" grove between two different material surface and filled with rich cement mortar and @ 100mm on each side of Joint including necessary "U" nails/ screws/ washers with cleats for fixing, overlaps, scaffolding at all floors/ all levels/ all heights etc. complete as per specifications and direction of Engineer-in-charge. For civil, plumbing, electrical & infrastructure works.
274
-
-
... More
Section 8.00 Water proofing Works Note: All the waterproofing treatment shall be executed through a water- proofing agency approved by the manufacturer and/or Engineer In Charge. A written guarantee on non-judicial stamp paper shall be submitted by the main Contractor and his sub contractor who has carried out work for a minimum period of ten years from the certified date of completion for the satisfactory performance of the entire water-proofing system. Providing and laying conventional (India Type) cement based brickbat coba water proofing treatment average 115mm thick and minimum thickness at khurra/ channel as 65 mm including preparation of surface as required for treatment on roofs, balconies, terraces etc. at all floors consisting of following operations and furnishing a guarantee bond in prescribe format of 10 years on Rs.100.00 stamp paper between main contractor, client and approved water proofing agency. 1) Cleaning and applying a cement slurry at the rate 2.75 Kg per sqm mixed with water proofing compound as manufacture''s specification as directed by engineer-in-charge over the slab including adjoining walls up to 300mm height including testing the surface, grouting the cracks if leakage is found before the treatment .2) Laying brick bats with mortar using broken bricks/ brick bats 25 mm to 115mm size with maximum 50% of cement mortar of mix 1:5 admixed with water proofing compound conforming to IS : 2645 in minimum 20 mm thick layer of beading cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls up to 300 mm height including rounding of junctions of walls and slabs. 3) After three days of proper curing applying a second coat of cement slurry at the rate 2.75 Kg per sqm admixed with water proofing compound conforming to IS : 2645 including laying glass fiber cloth of approved quality in top layer of plaster and finally Finishing the surface to make wired finish with average 12-20 mm thick joint less cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. 4) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge. (Only plan area shall be measured, vata shall not be measured separately and paid for.)
1529
-
-
... More
Integral crystalline waterproofing system with barrier type coating Providing and applying barrier type integral crystalline waterproofing treatment (surface coating) of Penetron, Kryton or equivalent to basement walls/ under ground water retaining structure etc. having speed of penetration 31 Cm in 56 days and resistance to 16 bar hydrostatic water head from negative side & capable of reducing permeability of concrete by more than 90 %, compared with control concrete. Rate shall be inclusive with damage and honey comb concrete, sealing any future hairline cracks because of its self healing nature as per manufacturer''s specifications and as per technical specification etc complete. Work shall be carried out by approved applicator and as per method of waterproofing accepted by manufacturer. Work shall be guaranteed for 10 years against any leakages and guarantee shall be provided on Rs. 100/- stamp paper in approved proforma. Using PENETRON coating @ 0.7 Kg. per SqM per coat in two coats (within 15 to 20 days on wet concrete) or equivalent
87
-
-
... More
Providing and laying 65 mm. thick water proof cement concrete flooring for IPS in 1:2:2 (1 Cement : 2 Sand : 2 Graded Aggregate 20mm nominal size) on RCC water tank Base, at all heights in line, level and gradient, including mixing water proofing materials of approved make, in cement concrete in proportion recommended by the manufacturer and finish smooth etc complete (for all civil, plumbing & electrical works).
22
-
-
... More
Section 9.00 Paving & Floor Finish Work Providing & laying broken china mosaic flooring for plain and curved surfaces, comprising of 12 to 20 mm. size broken pieces of glazed tiles (one or more colours, as directed) of Somany, Asian, Jonson or equivalent, laid over cement mortar 1:3 bedding including applying cement slurry at the rate of 2.75 kg per sqm on plain or sloped surfaces. The flooring/ dado shall be tampered with wooden rammer not exceeding 2 Kg in weight to bring the mortar up to the surface, including rounding of the junctions and extending them up to 15 cm. along the parapet wall. The rate shall include any type of bands, vata, any colour, any pattern or design as per drawing, curing, cleaning with water and oxalic acid etc. complete as sample approved by Architect/ EIC. (Only plan area shall be measured and paid). Rates should be inclusive of acid washing and vata.
1529
-
-
... More
Providing and laying vitrified floor tiles in 600mm x 600mm size (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours, shades, texture/ finish (matt/ anti skid/ satin/ polished/ glossy) in flooring and skirting, laid over a minimum 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) bedding on 40 mm wired finish screed 1:2:4 and laid to proper slope and level. Finishing to be done with flush pointing in white cement and approved pigment including curing and cleaning with mild oxalic acid etc. complete for all floor all height as directed by Architects and Engineer-in-charge. Rate shall be inclusive of protection of flooring until the handling of the project. (Only flooring area should be measured and paid.)
87
-
-
... More
Providing and laying Vitrified tiles in 600mm x 600mm size (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours, shade and texture/ finish (matt/ anti skid/ satin/ polished/ glossy), in wall tile/ dado, skirting, riser of steps, laid on masonry/ plaster/ RCC/ gypsum board with suitable cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness. Rate shall be inclusive of vitrified tile (as per approved sample), adhesive for fixing etc complete.
462
-
-
... More
Providing material and labour for laying average 25mm thick machine cut polished Kota stone slab of required size, approved quality, selected and sorted for uniform color & texture, in flooring, otta, Sill, skirting over 40mm (Average) thick base of cement mortar 1:5 (1-cement : 5-coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including curing, rubbing and polishing (semi mirror polish) at all floors any heights, any lead and lift in any shape and pattern etc complete as directed by Engineer In charge. Sample shall be approved before execution. Kota stone shall be in uniform shade of required size. Sample and mockup shall be approved before procurement of material.
1287
-
-
... More
Providing material and labour for laying average 25 mm thick machine cut polished kota stone slab in single piece of required length for tread, riser, window jambs & sills, coping of approved quality, selected and sorted for uniform color & texture over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) laid over and jointed with gray cement slurry including pencil sharped exposed edges, polishing (semi mirror polish), rubbing, curing, finishing, buffing after final polishing, maintaining up to handling over the project etc complete as directed by engineer in charge. All Expose edges of stone shall be pencil sharped and in even thickness and polished at all floors any heights, any lead and lift etc complete. as directed by Engineer In charge. Sample and mockup shall be approved before procurement of material.
21
-
-
... More
Providing material and labour for laying average 40mm thick machine cut polished Kota stone slab of required size, approved quality, selected and sorted for uniform color & texture, in flooring, otta, Sill, skirting over 40mm (Average) thick base of cement mortar 1:5 (1-cement : 5-coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including curing, rubbing and polishing (semi mirror polish) at all floors any heights, any lead and lift in any shape and pattern etc complete as directed by Engineer In charge. Sample shall be approved before execution. Kota stone shall be in uniform shade of required size. Sample and mockup shall be approved before procurement of material.
110
-
-
... More
Providing roughened strip 2.5 cm wide to form antiskid surface on treads of stairs in any type of stone including forming straight deep curved gishi (groove), 6 mm wide & 4 mm deep on two sides of the roughened strip, etching/ blasting/ hammering/ chiseling between two groove, polishing the edges, sides and bottom of gishi etc. complete as per sample approved. Only one time length of tread of stair shall be measured for payment.
85
-
-
... More
Providing & laying sandwich platform comprising of a) Sandwich of 18 mm thick single side polish Granite of approved size, shade and sample on top and 30 mm thick polished kota in bottom with 25mm thick cement mortar (1:4) in between b) At centre vertical sandwich supports of 30 mm thick two kota stone on sides and 20mm CM (1:4) in between and at both end walls vertical supports of 18 mm thick double side granite. c) 75 mm raised platform at bottom with kota on top and 50mm CM (1:4) at bottom, kota stone skirting as per design and approved sample. The rate includes rounding, champhering and mirror polishing of edges, facias of granite, MS support including necessary bonding adhesive (if required). Rate shall be also inclusive of making holes & cutouts for SS sink, Oval wash basin, Piller tap / Bib tap etc. as directed by engineer in charge. (Only plan area shall be measured & paid for). Rate shall be included all kota & granite mentioned in above.
28
-
-
... More
Section 10.00 Iron & Steel Works Providing, fabricating, assembling, hoisting/ erecting and fixing in position at all heights/ all levels/ all floors/ all shapes & sizes with all leads & lifts using MS Rolled Steel Sections, Hollow/ Tubular sections, all type of sheet/ plate, Bright Bars, deep threaded MS bolts, threaded J bolts, insert plate, support plate etc as per drawing. all confirming to latest relevant IS codes for the work of steel structures like built-up section, staircases, railings, handrail, jali, gates, grills, bracings, grating, corner guard, platforms, brackets, monkey ladder, cattle trap, pipe rack, rungs, false ceiling frame work, Roof canopy, fencing posts, frame work for Screen/ facade etc. including straightening, cutting, bending, bolting and welding the members all as per structural drawings and as per detailed specifications (for materials & workmanship) including necessary scaffolding/ staging etc. complete in the situations described hereinafter and comprising of : i) Profile Cutting of components to required length/ width and shape/ profile; ii) Smooth grinding/ machining of edges/ faces/ all welding joints; iii) Necessary welding (electric arc welding) for required weld lengths and sizes. iv) Machine drilling of holes for joining/ anchoring. The rate shall include dry sanding, degreasing (wet cleaning) & preparation of rust free surface manually or mechanically, metal putty to make the surface even and smooth, 2 coat zinc chromate yellow oxide primer and 2 coat of enamel paint of approved shade of paint over all the surfaces of the steel sections or as specified in the drawing. (Standard measurements will be paid for as actual cut length used at site). Note: The contractor shall be submit fabrication drawings based on construction drawings (that may be issued during construction period) for approval by the Architect/ Engineer. The fabrication work shall start only after approval of the fabrication drawings submitted by contractor. Any change required in the fabrication drawings shall be carried out at No extra cost. Fabrication shall be in a perfect architectural workmanship manner and as provided in section V & VI of IS 800 & IS 7215. Rate shall be inclusive for the cost of anchor fastener, nut, bolt, accessories etc for fixing the elements.
1322
-
-
... More
Section 11.00 Painting & polishing Works Providing & applying Weather Shield External Acrylic Paint of Apex Ultima of Asian or equivalent having VOC (Volatile Organic Compound) content less than 50 gm/ltr (minimum 2 coats) from following of desired shade (1 coat of exterior grade primer and 2 coats of paint) to give an even shade with brush on exterior sand faced plastered surfaces/ mala plastered surfaces/ textured surface or any other surfaces at all heights including scraping the existing painted surface (if required), thoroughly brushing the surfaces with sand paper to make it free from mortar dropping and other foreign matter, scaffolding etc. complete as per the manufacture''s specification and up to the satisfaction of Engineer in charge. The rate shall also include the cost of filler for cracks on the surfaces.
3235
-
-
... More
Paint and putty work on plastered surface Providing and applying (Synthetic) Plastic emulsion paint (minimum 2 coats) having VOC (Volatile Organic Compound) content less than 50 gm/ltr on newly dry interior plastered surface including ceiling, roof etc.at all heights/ all levels/ all surfaces to give an even shade including applying required coats (min two coats) of white cement based putty after thoroughly brushing the surfaces free from mortar dropping and other foreign matter. Preparing the surface even and sand papered smooth, after applying every coat of putty complete. Priming coat of alkali resistant cement primer (water or solvent based) is to be applied over prepared smooth surface (undulation free) etc. complete as directed by engineer-in-charge. Sample to be approved before starting of the work by Architect/ EIC. The rate shall include the cost of filler for filling the cracks on surface, scraping the existing painted surface (if required), thoroughly brushing the surfaces with sand paper to make it free from mortar dropping and other foreign matter, scaffolding etc.
1654
-
-
... More
Section 16.00 Misc Items - False Ceiling WPC board Ceiling with paint finish Providing and fixing 19mm thick Beige colour WPC board for paneling as pelmet with GI Gypsteel framing for ceiling of saint gobain as per drawing. Openable panel shall be made out of 19mm WPC board of approved make with necessary hardware i.e. hinge, magnet, etc. Exposed area of pelmet and openable shutter shall be sand papered and painted (min two coat) with of approved make and shade. Rate shall be inclusive of paint
87
-
-
... More
Section 17 Demolition works Demolition including stacking of serviceable materials and disposal or unserviceable materials at no objectionable place with all leads and lifts including cutting the reinforcement, and finishing the broken surfaces to match with the surroundings etc. complete : RCC Works.
58
-
-
... More
Dismantling china mosaic & water proofing with all sub base etc. and as directed including taking the materials and disposal of unserviceable material at no objectionable place to all leads and lifts.
1529
-
-
... More
Demolition of brick work and stone masonry with or without plaster including stacking of serviceable materials and disposal of unserviceable materials at no objectionable place with all leads and lifts in lime mortar.
64
-
-
... More
Disconnecting, Shifting, Placing & reconnecting the existing ODU and other HVAC units to its working conditions to approved /said position by Engineer-in-charge
1
-
-
... More
Disconnecting, Shifting, Placing/stacking the existing Solar Panels to approved /said position by Engineer-in-charge
1
-
-
... More
Rebaring : Supplying, Drilling/ Cleaning hole and injecting Medium duty injection adhesive HY200 R for rebar fixing in Dry conditions. Drilling hole to the required depth by rotary hammer drill, cleaning with brush and jet of clean air, filling resin and hardener with standard dispenser into a hole of dia & depth as per manufacturer/ structural consultant''s specification and fixing rebars of the required diameter subsequently and then fixing the re-bar. The system should be made of two foils consisting of resin and Hardener foil pack.The installation and the setting instructions should be strictly followed as per the manufacturer''s specifications. Contractor shall submit the Rebar Depth Calculation based on design loads & other parameters as provided by consultant and in accordance with EOTA-TR-023/029 “guidelines for post installed rebar connections” for approval. Rate should be inclusive of all material, labour, necessary scaffolding etc complete for all height as directed by engineer in charge. (Pull out testing up to 1% of total rebar is to be produced by manufacturer). Steel will be paid under relevant item. Rebaring for diameter up to 10mm
22
-
-
... More
Rebaring for diameter above 10mm
55
-
-
... More
Plumbing works Section 1.00 Plumbing works Providing and fixing galvanized iron (GI) mild steel tube (Medium grade Class B) of Tata make, conforming to IS: 1239, including tube fittings of R Brand such as sockets, unions, reducers, long or short bends, elbows, nipple, tees, etc., complete in proper line and level, including clamps, jointing with screw joints, using Teflon tape, conceal to wall, ceiling and floor including making them good the civil works, etc., complete of the following nominal bore (NB) size: Internal work (Concealed) 15mm dia pipes (21.8mm OD / 16.6mm ID)
22
-
-
... More
20mm dia pipes (27.3mm OD / 22.1mm ID)
13
-
-
... More
25mm dia pipes (34.2mm OD / 27.8mm ID)
11
-
-
... More
32mm dia pipes (42.9mm OD / 36.5mm ID)
11
-
-
... More
40mm dia pipes (48.8mm OD / 42.4mm ID)
11
-
-
... More
Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc. (Internal Work - Concealed)
64
-
-
... More
Providing and fixing galvanized iron (GI) mild steel tube (Medium grade Class B) of Tata make, conforming to IS: 1239, including tube fittings of R Brand such as sockets, unions, reducers, long or short bends, elbows, nipple, flanges, check-nuts, tees, etc., complete in proper line and level, including necessary supports viz., clamps, brackets, as specified, jointing with screw joints using Teflon tape, open on wall and floor, including testing the joints, and wrapping the pipes with insulation, etc., complete of the following nominal bore (NB) size: (Insulation as per Item. No. 1.4) - Internal Work - Exposed on wall (For Vertical Shafts) and Terrace level 40mm dia pipes (48.8mm OD / 42.4mm ID)
6
-
-
... More
50mm dia pipes (60.8mm OD / 53.6mm ID)
56
-
-
... More
65mm dia pipes (76.6mm OD / 69.4mm ID)
75
-
-
... More
Providing & fixing of XLPE closed cell (Thermo plastic elastomeric) insulation with Aluminium Foil cover, of approved make, of the following diameter and thickness over exposed water pipes and fittings, of minimum 30 + 3 kg / M³ density and having thermal conductivity 0.0382 W/MK or better at 26°C mean temperature, class ''O'' insulation applied by suitable adhesive complete as per manufacturers specifications (for external water supply) all complete as per directions of the Engineer. Rate includes cost of all materials including fixing the insulation with the pipes with tapes or adhesives, labour charges for working at all levels, leads and heights. Internal Work - Exposed on wall (For Vertical Shafts) and Terrace level For 40mm dia pipes - 6mm x 50mm XLPE Plain Tubing with ALUPET Foil
7
-
-
... More
For 50mm dia pipes - 6mm x 54mm XLPE Plain Tubing with ALUPET Foil
56
-
-
... More
For 65mm dia pipes - 6mm x 75mm XLPE Plain Tubing with ALUPET Foil
75
-
-
... More
Providing & fixing full way wheel operated bronze gate valve (peg type) of conforming to BSEN 12288 (BS 5154), having screwed female ends conforming to IS 554, screwed in bonnet, inside screw, non-rising stem, integral seat, premium quality PTFE gland packing: Test Pressure (Hydrostatic): Shell: 25 kg/cm²g (350 psig), Seat: 16 kg/cm²g (225 psig), Maximum Working Temperature : 225°C, complete with Teflon sealant tape wound on the threaded joints, etc. and fixing to pipe work as per the direction of the Engineer. Make: Sant Cat. No.: IS 1 / Zoloto Art. No.: 1007 / Equivalent 50 mm Nominal bore
3
-
-
... More
65 mm Nominal bore
4
-
-
... More
Providing, fixing, jointing, testing and commissioning of male/ female screwed end full way lever operated forged brass ball valve of brass body with forged brass hard chrome plated ball & Teflon seat, PN 16 with (threaded joints) complete as required with all necessary accessories as per specification/drawings and as directed by Engineer In Charge. Location: Inside shafts, for isolation of Risers. Make: Sant Cat. No.: IS 20 / Zoloto Art. No.: 1008B / Equivalent 40 mm dia. Nominal bore
8
-
-
... More
50 mm Nominal bore
4
-
-
... More
Providing, fixing, testing and commissioning Screwed End Forged Brass diaphragm / piston type pressure reducing valve (maximum inlet pressure rating: 25 Bar, minimum outlet pressure: 1.5 Bar) with EPDM/Nitrile seat & ''O'' Ring, pressure adjustable knob, external graduated scale for easy reading of set pressure, stainless steel filter cartridge, complete as per direction of the Engineer. Make: Sant / Zoloto / Lehri / Equivalent 40 mm dia. Nominal bore
3
-
-
... More
50 mm Nominal bore
2
-
-
... More
65 mm Nominal bore
1
-
-
... More
Providing, fixing, testing and commissioning of Screwed End Gun Metal body Check (non-return) valve of approved quality of the following sizes, complete as per direction of the Engineer. Make: Sant / Zoloto / Equivalent 65 mm Nominal bore
1
-
-
... More
Section 2.00 Sanitary Installations SANITARY - CERAMIC WARE & ACCESSORIES Providing and Fixing white / ivory vitreous china rimless extended wall mount water closet (EWC) of Hindware - Etios - Cat. No.: 20096, as per IS: 2556 (Part 2) of minimum size 620 (long) x 355 (wide) x 700 (height) mm (P Type) including vitreous china cistern (Cat. No: 21056) with dual flush fittings, heavy duty seat and cover as per IS: 2548, chair bracket with 75 mm long, 6.5 mm. diameter counter sunk bolts and nuts embedded in the wall using rubber or fiber washers so as not to allow any lateral displacement of approved make and quality, and as approved by Engineer, including PVC Connector, all necessary fittings and accessories, complete as per specifications and as directed by the Engineer-in-charge.
7
-
-
... More
Providing and fixing White / Ivory Vitreous China Wall mount wash basin of Hindware - Windsor - Cat. No.: 10036, of size 460 x 360 mm with C.I. brackets, including painting of fittings and brackets, all junctions shall be sealed with silicon sealant. Rate shall include of 32 mm dia CP cast brass bottle trap of Jaquar - Allied series Cat. No. 769L300x190 with extension piece to wall, wall flange with rubber adopter for waste connection and 32 mm dia CP brass waste full thread coupling of Jaquar Make Allied series Cat No. 705L130, as per specifications and as directed by the Engineer.
8
-
-
... More
Providing and fixing white vitreous china flat back urinal of Hindware - Cat. No.: 60002 of size 376 x 390 x 590 mm as approved by Consultants, comprising of: a) CP brass Pressmatic Urinal Flush Valve Auto-closing system with built in Control Cock and Wall flange, and 15mm S.S. pipe connection with urinal - Cera - F9020203 b) CP Brass urinal spreader, 1 for each urinal - Cera - F8070201 c) 32mm NB waste coupling of Jaquar - Allied series Cat. No. ALD705 , 1 for each urinal d) 32mm bottle trap of Jaquar - Allied series Cat. No. 769L250190, and e) All necessary fittings & accessories as per specifications and directions of Engineer-in-charge
9
-
-
... More
Providing and fixing a vitreous chinaware Ivory colour Urinal partitions of Hindware - Cat. No.: 61005 of size 750 x 165 x 365mm, including brass screws, silicon sealant, and all necessary materials required for fixing, complete as per directions of the Engineer-in-charge.
8
-
-
... More
SANITARY - CP FAUCETS Providing and fixing ABS Chrome plated Brass Hand Shower (Health Faucet) of Jaquar - Allied series Cat. No. ALD573 and quality and as approved by Engineer - In - Charge, including 8 mm dia, 1 .2 Meter long Flexible tube & wall hook including cutting and making good the walls wherever required complete as per directions of the Engineer.
7
-
-
... More
Providing and fixing of 15mm nominal bore CP Brass Angle valve with wall flange of Jaquar - Continental - Cat No.: CON-059KN, confirming to IS: 8931, for wash basins, water coolers, etc of approved quality and as approved by and directed by the Engineer.
23
-
-
... More
Providing and fixing brass chromium plated heavy quality wash basin long neck pillar cock of Jaquar - Continental - Cat No. CON-021KN, including 450mm Long Braided Hose with M10X1 Nipple, 15mm Nut, O-Ring & Rubber Washer, connecting with the angle cock, all necessary materials required for fixing, complete as per directions of the Engineer-in-charge.
2
-
-
... More
Providing and Fixing in position CP brass Pressmatic Pillar cock of Jaquar - Pressmatic series - PRS-031, including 450mm Long Braided Hose with M10X1 Nipple, 15mm Nut, O-Ring & Rubber Washer, connecting with the angle cock, all necessary materials required for fixing, complete as per directions of the Engineer-in-charge.
6
-
-
... More
Providing and Fixing 15mm nominal bore (short body) C.P brass bib cock of Jaquar - Continental - Cat. No.: CON-047KN with wall flange complete, including cutting and making good the walls wherever required.
7
-
-
... More
SANITARY - WASHROOM ACCESSORIES Providing and fixing a screw-to-wall type toilet paper-roll holder with flap, fixed to the wall with CP brass screws, of Jaquar - Continental - Cat. No.: ACN 1153S, and all necessary materials required for fixing, complete as per directions of the Engineer-in-charge.
7
-
-
... More
Providing and fixing SS or brass chromium plated double Robe hook of Jaquar - Continental - Cat. No.: ACN 1161N, and all necessary materials required for fixing, complete as per directions of the Engineer-in-charge.
7
-
-
... More
Providing and fixing SS Towel Ring of Jaquar - Continental - Cat. No.: ACN 1121BN, with round wall flange, and all necessary materials required for fixing, complete as per directions of the Engineer-in-charge. Make: Kich / Jaquar / Equivalent
8
-
-
... More
Providing and fixing Stainless Steel Grab bar , 600mm long of Jaquar - Hotelier series - Cat. No. AHS-1507 fixed to the wall with CP brass screws, etc., complete to the satisfaction of Engineer-in-charge. Make: Kich / Jaquar / Equivalent
2
-
-
... More
Providing and fixing Heavy class duty Stainless Steel of grade SS 304 floor drain cover with cockroach trap, of approved make and quality, weighing not less than 150 gms. including setting in floor with white cement to match with floor finish and as approved by and as per directions of Engineer-in-charge. 101mm x 101mm Square Matt finish Stainless Steel Floor drain cover with Cockroach trap consisting of 100mm x 100mm perforated top cover, 67mm Ø x 56mm high Cockroach Trap ideal for 75mm drain pipe. Make: Neer / Chilly / Equivalent
9
-
-
... More
137mm x 137mm Square Matt finish Stainless Steel Floor drain cover (For Urinal Drains) with Cockroach trap consisting of 100mm x 100mm solid top cover, 77mm Ø x 67mm high Cockroach Trap ideal for 100mm drain pipe.. Make: Neer / Chilly / Equivalent
2
-
-
... More
Section 3.0 - Internal Plumbing Providing and fixing an SWR quality, heavy duty, uPVC ‘P’ trap as per IS: 14735 of Astral / Supreme / Ashirvad make, having a minimum water seal of 50 mm, as approved by EIC Including cutting the floor and making them good with surrounding M15 CC, masonry /block supports, MS brackets etc. testing, etc complete to the satisfaction of Engineer in charge, of he following size: (For All Drain Points) 3.1.1. - 110 x 75 mm Dia
11
-
-
... More
Providing and fixing 6 kg/cm2 PVC non pressurized wastewater pipes as per IS: 4985, of Astral / Supreme / Ashirvad make, solvent welding of pipes and fittings, fittings such as bends, elbows, tess etc., including chasing in the walls, fixing the pipes with clamps regular spacing, refilling the chased walls with Cement mortar 1:3 (1 - cement: 3 - fine sand) as directed by the Engineer. (For Kitchen Sinks, Urinals, and Wash Basins) 40 mm dia pipe (40.0mm OD / 32.8mm ID)
9
-
-
... More
50 mm Dia pipe (50.0mm OD / 42.6mm ID)
7
-
-
... More
Providing, fixing, testing & commissioning of Solvent Fit UPVC non pressurized wastewater (SWR) pipes as per IS: 13592, of Astral / Supreme / Ashirvad make, including all fittings as per IS: 14735 such as bends, Y joints, reducers, swept tee, reducer Y joints, end caps, etc. and jointing the pipes and joints with solvent weld complete, including chasing in the walls, split pipe clamps with rubber lining, threaded rods, Hilti Make anchor fasteners, encasing the pipes with 100mm thick P.C.C. of 1:4:8 mix (1-cement; 4-coarse sand; 8-graded stone aggregate 20mm nominal size) in sunk slab portion only, complete and as directed by the Engineer. (For Internal Drainage) a) 75 mm dia pipe (75.0mm OD / 68.6mm ID)
14
-
-
... More
b) 110 mm dia pipe (110.0mm OD / 103.6mm ID)
87
-
-
... More
Providing and fixing UPVC non pressurized waste water fittings as per IS: 14735,of Astral / Supreme / Ashirvad make, with rubber insert of 3mm thickness complete, jointing the fittings and the pipes with manufacturer approved lubricant, complete and as directed by the Engineer. 110mm diameter Vent Cowl.
8
-
-
... More
Section 4.0 Rainwater Disposal Providing and fixing on wall face and/or suspended on ceiling unplasticized-PVC rain water pipes and fittings including bends, tees, Y joints, Reducers, etc., conforming to IS : 4985,of Astral / Supreme / Ashirvad make, of 10 kg/sq. cm. including providing and fixing HILTI Make Anchor Fasteners, 8mm diameter G.I. Threaded rods, and clamps fixed at every 1.5 meters C/C, jointing the pipes and fittings with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. 110 mm dia pipe (110.0mm OD / 105.6mm ID)
96
-
-
... More
Section 5.0 Plant & Equipments Hydro-pneumatic Systems for Domestic Water: Supply, installation, testing & commissioning of Variable Speed highly efficient hydro-pneumatic pump system with in-line, vertical multistage, centrifugal clear water pumps with 304 casing, 304 impeller and SS-316 shaft, C.I. Base and head with CED coating. TEFC induction motor of Class ''F'' insulation and efficiency class IE3 / IE5 magnetic motor (IE5 is preferable motor) with company fitted mechanical seal and company compliance certificate, operating on 1450 / 2900 RPM, suitable for operating on 415V + 10%, 3 phase, 50 Hz, A.C. supply. Vendor to submit performance curves and technical catalogue with all GA Drawing of the proposed model for review and information. Panel mounted HMI based controller with large graphical display with VGA 240 x 320 pixels / MCCB Panel with IP55 rating and variable frequency drive (VFD) integrated in a Panel with pressure sensor transmitter, pressure switch, diodes to indicate pump ready, pump running and fault and capable to communicate with other controllers following MODBUS-RTU or BACNET Class-2 protocol through RS485 port. All alarms should be displayed in the controller. Cascading feature is must in system and System should be equipped with dry running protection. Pump curves should be inbuilt in the external controller/pump inbuilt PID controller. Indication of all type of faults / on-off status / electrical parameters shall be available on panel and central IBMS monitors. On-off operation for all pumps shall be available on BMS system. The scope also includes accessories such as pressure gauges with gunmetal isolation cocks, vibration elimination pads, etc. mounted on a SS / MS base frame bolted to cement concrete foundation complete in all respects pre-engineered, factory fabricated, assembled & tested, fully integrated, pressure booster station. Set of accessories such as G.I. headers for suction and discharge, control valves, non return valves, pressure transducers, pressure gauge, inter connecting power and control cabling etc. complete. Global / Equivalent Make Pre-charged diaphragm pressure vessel with 3 years warranty from manufacturing date and company tested replaceable membrane, charging connection, connected to outlet header with necessary flanges, gaskets, isolating valves, nuts/bolts etc. complete (size of pressure vessel shall be following capacity or as per manufacturer recommendation). Vessel Shall be pre-charged with Nitrogen as per respective Pump Head. Each Vessel shall be installed with 2 1/2" SS 304 Glycerin Filled Manometer on Top. Make: Kirloskar - KSIL/KCIL20-2 / Xylem / Grundfos 1 Set = 3 Nos. Pump (2 Working + 1 Standby - cascade operation) Capacity per pump - 15.0 m3/hour System Capacity - 30.0 m3/hour Head - 25 mtr Pressure vessel PN10 rating- 100 liters or as per manufacturer recommendation with Justification. Suction & Discharge Pipe Size: 65 mm nominal diameter Approx. Elec. Load. - 2.2 kW / 3.0 HP each pump Location - Terrace Suction head - flooded positive suction
1
-
-
... More
WATER COOLERS WITH INBUILT UV FILTERS: Providing & erecting full brushed S.S. body (SS 304) water cooler with inbuilt UV Filters, having storage capacity 160 Ltrs. to 175 Ltrs. (Tank: SS 304), & cooling capacity 150 Ltr. Per hour @ an ambient temp of 45°C. The outlet temperature of the water should drop by 15°C within a hour. The water cooler should be comprising of hermetically sealed reciprocating compressor with R314A cooling gas, fan motor, copper condensing unit, water tank surrounded by evaporating coil, thermostats, relay etc.complete with necessary inlet & outlet copper tubes and insulation, MS Channel Stand with two coats of anti-corrosion primer and two coats of sulphur black water-proof paint, with UV system of 50 LPH with G.I. Skid for mounting the UV lamp, and complete instrumentation. with DPELCB and 4 Way DB Box with accessories, 3 core wires for power connections, and earthing connection. Make: Power H2O / Usha / Equivalent.
1
-
-
... More
R.O. PLANT: Supplying & erecting 5 stage single reverse osmosis water purification system of 50 LPH capacity, with M.S. powder coated frame, prefilter housing with ''O'' ring, presediment filter, GAC filter, suitable booster DC pumps (2 nos.) of capacity 150 psi, with 40 psi inline type post carbon filter, auto low & high pressure switches, complete and erected as directed by Engineer-in-charge. Make: Power H20 / Aquila / Aquaguard / Kent.
1
-
-
... More
Electrical works Section 1.00 - M V Switchgear Supplying, assembling, grouting, leveling, installation, Connecting , unloading at site, shifting to site, assembling, erecting, Testing, & Commissioning of L.T. panel board, fabricated from CRCA sheet & folded channel totally enclosed cubical type compartmentalized as per drawings. THIRD FLOOR HVAC ODU PANEL ( OUTDOOR TYPE) as per single line diagram
1
-
-
... More
Supplying, assembling, grouting, leveling, installation, Connecting & testing D.B of specified make but without MCB /RCCB/RCBO/MCCB/ SPD etc. with all internal bus bar as per requirement. VTPN Distribution Board Supplying, erecting, testing and commissioning of only VTPN D.B. with space for FP MCCB as incoming and space for 9 TPMCB & 9 SPMCB as outgoing per phase (i.e. 12 way VTPN D.B.) equivalent to Legrand cat no 607752.
1
-
-
... More
TPN Distribution Board Supplying, erecting, testing and commissioning of only TPN D.B. with space for FP MCB as incoming and space for DP RCCB and 14 SPMCB as outgoing per phase (i.e. 16 way TPN D.B.) equivalent to Legrand cat no 507674 with 16 way PPI kit cat no.507948
3
-
-
... More
Supplying, erecting, testing and commissioning of only TPN D.B. with space for FP MCB as incoming and space for DP RCCB and 10 SPMCB as outgoing per phase (i.e. 12 way TPN D.B.) equivalent to Legrand cat no 507673 with 12 way PPI kit cat no.507947
5
-
-
... More
Supplying, erecting, testing and commissioning of only TPN D.B. with space for FP MCB as incoming and space for DP RCCB and 6 SPMCB as outgoing per phase (i.e. 8 way TPN D.B.) equivalent to Legrand cat no 507672 with 8 way PPI kit cat no.507946
1
-
-
... More
SPN Distribution Board Supplying, erecting, testing and commissioning of SPN D.B. with space for DP RCCB as incoming and 12 SPMCB as outgoing per phase (i.e. 16 way SPN D.B.) equivalent to Legrand cat no. 607713
3
-
-
... More
Supplying, erecting, testing and commissioning of SPN D.B. with space for DP RCCB as incoming and 8 SPMCB as outgoing per phase (i.e. 12 way SPN D.B.) equivalent to Legrand cat no. 607712
2
-
-
... More
Supplying, erecting, testing and commissioning of SPN D.B. suitable for outdoor mounting IP 65 with space for DP MCB as incoming and 2 SPMCB as outgoing (i.e. 4 way SPN D.B.) equivalent to Hensel make cat no. KV 7104
1
-
-
... More
2.4 MCB''s and its Accessories Supplying, Assembling, leveling, connecting & testing following MCB / ELMCB / Isolators etc in boards as specified in 7.1, 7.2 & 7.3 6 to 32 A SP MCB
220
-
-
... More
6 to 32 A DP MCB
5
-
-
... More
40 A DP Isolator
2
-
-
... More
40/63 A FP Isolator
2
-
-
... More
16 - 25 A DP RCBO (30mA)
1
-
-
... More
16 - 25 A DP RCBO (100mA)
4
-
-
... More
32 A DP RCBO (30mA)
10
-
-
... More
32 A DP RCBO (100mA)
2
-
-
... More
40 A DP RCBO (30mA)
10
-
-
... More
40 A DP RCBO (100mA)
2
-
-
... More
63 A DP RCBO (30mA)
2
-
-
... More
63 A DP RCBO (100mA)
1
-
-
... More
63 A FP RCBO (100mA)
1
-
-
... More
16 - 32 A TP MCB
1
-
-
... More
40 A TP MCB
1
-
-
... More
63 A TP MCB
1
-
-
... More
16 - 32 A FP MCB
4
-
-
... More
40 A FP MCB
9
-
-
... More
63 A FP MCB
6
-
-
... More
Sheet steel metal enclosure for SP MCB cat no.607881
1
-
-
... More
Sheet steel metal enclosure for DP MCB cat no.607882
1
-
-
... More
Sheet steel metal enclosure for FP MCB cat no.607884
10
-
-
... More
Blank Plates
10
-
-
... More
Surge Protection Devices (SPD) Supplying, Assembling, leveling, connecting & testing following VSPs etc in boards as specified in 7.1, 7.2 & 7.3 1.2KV Protection level FP, Class ''s'', (Imax-15KA, 8/20µS) L&T Cat no. LPDA2015P4 or Equivalent
2
-
-
... More
1.2KV Protection level DP, Class ''s'', (Imax-15KA, 8/20µS) L&T Cat no. LPDA2015P2 or Equivalent
2
-
-
... More
2.6 MCCBs & Isolators : Supplying, Assembling, leveling, connecting & testing following MCCB etc in boards as specified in 7.1, 7.2 & 7.3 100 A FP MCCB not less than 10 KA
1
-
-
... More
M.S. powder coated enclosure suitable for 100A FP MCCB.
1
-
-
... More
2.7 Caution Boards Caution boards of size 150 x 150 mm. to be supplied & fixed on the D.B.
3
-
-
... More
Caution boards of size 100 x 100 mm. to be supplied & fixed on the D.B.
1
-
-
... More
Section 4.00 - M V Cabling Supply, testing and Laying XLPE steel/GI wire/flat armored cable of 1100 V grade of Aluminum / Copper Conductor of following sizes in ready made trench or mounted on wall with necessary clamping arrangement or in pre-laid RCC hume pipe with necessary cable identification mark to be provided at distance of 25 mt. The vertical cable on wall shall be drawn in prelaid conduit for vertical mechanical support. Aluminium Cables 70 sq.mm x 3.5 c Al. cable
400
-
-
... More
50 sq.mm x 3.5 c Al. cable
82
-
-
... More
25 sq.mm x 3.5 c Al. cable
148
-
-
... More
Copper Cables 16 sq.mm x 4 c Cu. cable
20
-
-
... More
10 sq.mm x 4 c Cu. cable
400
-
-
... More
6 sq.mm x 4 c Cu. cable
10
-
-
... More
4 sq.mm x 4 c Cu. cable
10
-
-
... More
2.5 sq.mm x 4 c Cu. cable
10
-
-
... More
16 sq.mm x 3 c Cu. cable
10
-
-
... More
10 sq.mm x 3 c Cu. cable
10
-
-
... More
4 sq.mm x 3 c Cu. cable
10
-
-
... More
2.5 sq.mm x 3 c Cu. cable
10
-
-
... More
HEAT / FIRE RESISTANT COATING OF CABLE Supply and application of intumescent based coating on cables/ cable tray using CP 678 fire stop cable coating of HILTI make or equivalent .The coating shall have a density in the range of 1.2 to 1.4 Kg/ L. The coating shall be non-toxic, asbestos and halogen free and shall have good mechanical strength. The coating shall comply with IEC 332 part 3 (1992).
2.2
-
-
... More
Section 5.0 Cable Termination Supplying & fixing double compression type Brass glands (single compression for indoor application and double compression for outdoor applications) & making joint with necessary bi metallic crimping socket of long nack type connecting the same to various equipment/panel/DB etc. for the following sizes: Aluminium Cables 70 sq.mm x 3.5 c Al.
10
-
-
... More
50 sq.mm x 3.5 c Al.
2
-
-
... More
25 sq.mm x 3.5 c Al.
4
-
-
... More
Copper Cables 16 sq.mm x 4 c Cu. cable
2
-
-
... More
10 sq.mm x 4 c Cu. cable
12
-
-
... More
6 sq.mm x 4 c Cu. cable
2
-
-
... More
4 sq.mm x 4 c Cu. cable
2
-
-
... More
2.5 sq.mm x 4 c Cu. cable
2
-
-
... More
16 sq.mm x 3 c Cu. cable
2
-
-
... More
10 sq.mm x 3 c Cu. cable
2
-
-
... More
4 sq.mm x 3 c Cu. cable
2
-
-
... More
2.5 sq.mm x 3 c Cu. cable
2
-
-
... More
Section 6.00 Cable Tray Supply & Installation of hot dip GI ladder type cable tray with all accessories like coupler, GI nut bolts, bend, tee, reducer etc as per specification and drawings complete with all required hardware : 150 x 50 made out of 2 mm thick
27.5
-
-
... More
300 x 100 made out of 2 mm thick
27.5
-
-
... More
450 x 100 made out of 2 mm thick
5.5
-
-
... More
600 x 100 made out of 2 mm thick
5.5
-
-
... More
Supply & Installation of hot dip GI Perforated type cable tray with all accessories like coupler, GI nut bolts, bend, tee, reducer etc as per specification and drawings complete with all required hardware : 150 x 50 made out of 2 mm thick
10
-
-
... More
300 x 100 made out of 2 mm thick
5.5
-
-
... More
600 x 100 made out of 2 mm thick
5.5
-
-
... More
Supplying , fabricating and installation of various sizes clamps for cable tray supports using available M.S. sections & rod as per drawings or instructions of engineer in charge or consultant including applying zinc chromate yellow oxide and two to three coats of required enamel paints with anchor fasteners etc.
165
-
-
... More
Supplying , fabricating and installation of various sizes junction boxes made out to 14 gauge sheet with all necessary accessories & hardware etc All the necessary fabrication required will be included in the scope of contractor. Scope also includes two coat of primer and two coat of paining of each items on all the sides complete in all respect.
27.5
-
-
... More
Section 7.00 Internal Wiring Wiring of points to be done in open/concealed manner in 25 mm dia medium gauge Rigid PVC FRLS pipe. Wiring shall be done with FRLS type copper flexible wire of 650V/1100V. Separate pipe should be taken for circuit mains. Nos of circuit of the same phases may be taken in same conduit (maximum 2 ckts).The circuit shall be laid in 25/40 mm dia medium gauge rigid PVC FRLS pipe. The point rate shall include all the necessary piping and wiring from sub panel / Distribution board to switch board & switch board to the batten holder / angle holder / connector / ceiling rose all inclusive except sub panel / Dist board. The wiring shall be done as per relevant prevailing standard. The looping of the wiring should be done in the switch boxes or light and fan point outlet boxes to avoid the junction boxes. The junction boxes and switch boxes for the ceiling light point, fan point etc shall be minimum 60/75 deep. All the necessary jarry in brick plastered walls should be done with machine cutter only , also jarry should be filled with cement, sand and wire mesh as required, the material cost for rough finish shall be included in point rate. Whenever pipes are required to be laid in flooring shall be of heavy guage. Wiring should be done as per distribution details. Each circuit should have dedicated phase, neutral & earth wire. Wire sizes to be used as under For Light Points /fan point/ wall fan / 6A 3 Pin Plug - DB to SB - 2.5sqmm for Phase & Neutral & 1.5 sqmm for Earth - SB to Point - 1.5 sqmm for Phase & Neutral & Earth For 6A plug point - 1.5 sqmm for Phase, Neutral & Earth For 6/10/16A general purpose plug point - 2.5 sqmm for Phase, Neutral & 1.5 sq. mm Earth For 16A plug point for A/C and Geyser - 4 sqmm for Phase, Neutral & 2.5 sq. mm Earth For 20/32A plug point - 6 sqmm for Phases, Neutral & 4 sq. mm Earth No zarry will be allowed in expose brick work. The conduit shall be provided when the walls are under construction. The pipes in slab shall be laid before the slab is casted. One light point controlled by one single way 6 A switch.
101
-
-
... More
One light point controlled by one SP MCB rate of light point does not include cost of MCB.
3
-
-
... More
Loop light point controlled by same switch or SP MCB same as 12.1.1. & 12.1.2.
110
-
-
... More
One light point controlled by two, two way 6 A switch
5
-
-
... More
One ceiling fan outlet point controlled by one 6 A switch and hum free electronic type step regulator.
44
-
-
... More
One 6 A x 5 pin 250 Volt socket outlet point controlled by one 6 A switch located on switch board.
33
-
-
... More
6 A x 5 pin 250 Volt switched socket outlet point at convenient location. (General Purpose Plug Point & Laptop Plug Point on Desk)
299.2
-
-
... More
6/16 A x 250 V switch socket point on one switch box for AV VRV IDU''s, Laptops, Fridge, Oven, Tea-coffee Machine etc with 2.5 sqmm flexible wires and phase and neutral and 1.5 sq nm flexible Cu. wire as earth wire. The rate should include conduiting Up to DB.
26.4
-
-
... More
6/16A x 250 Volt switched socket outlet point for A.C./Geyser with 4 sq.mm wire for phase and neutral & 2.5 sq.mm earth wire.
1
-
-
... More
6/16A x 250 Volt switched socket outlet point for outside with 4 sq.mm wire for phase and neutral & 2.5 sq.mm earth wire.(outdoor type)
1
-
-
... More
-Do- as above but switch and socket at different location.
2
-
-
... More
Exhaust fan outlet point with 6A 5 pin socket controlled by one 5 single way switch located at different location.
2.2
-
-
... More
10A x 250V Metal clad socket outlet point with 10 Amp. SPMCB.
1
-
-
... More
20 A x 250 Volt metal clad socket outlet point with 20 Amp. SPMCB.
1
-
-
... More
32 A 5 pin x 415 Volt (3 Phase) Metal clad socket outlet point with 32 Amp. FPMCB.
1
-
-
... More
Buzzer point controlled by Bell push with modular type buzzer same make as switch
2
-
-
... More
Bell point controlled by Bell push switch with bell of approved make.
2
-
-
... More
SITC computer power supply point with 3 nos of 6 amp 5 pin plugs with 1 no 16 A Switch with indicator & wiring of computer point.
1
-
-
... More
SITC computer power supply point with 2 nos of 6 amp 5 pin plugs with 1 no. of 16 Amp. Plug with 1 no 16 A Switch with indicator & wiring of computer point.
27.5
-
-
... More
7.2 MAINS: The mains is considered from the meter / sub panel to the individual distribution boards Supplying and Laying mains with 4 nos. of 25 sq mm Cu. PVC insulated flexible wire with ISI and FIA approval for 650 V/ 1100 V and 2 nos 10 sqmm Cu. PVC insulated flexible wires with ISI approval for 650 V/ 1100 V as earth wires to be drawn in 40 mm diameter rigid PVC conduit of medium gauge having ISI and FIA approval with all necessary accessories.
10
-
-
... More
Supplying and Laying mains with 4 nos. of 16 sq mm Cu. PVC insulated flexible wire with ISI and FIA approval for 650 V/ 1100 V and 2 nos 6 sqmm Cu. PVC insulated flexible wires with ISI approval for 650 V/ 1100 V as earth wires to be drawn in 40 mm diameter rigid PVC conduit of medium gauge having ISI and FIA approval with all necessary accessories.
10
-
-
... More
Supplying and Providing mains with 4 nos. of 10 sq mm Cu. PVC insulated flexible wire with ISI and FIA approval for 650 V/ 1100 V and 2 nos 4 sqmm Cu. PVC insulated flexible wires with ISI approval for 650 V/ 1100 V as earth wires to be drawn in 40 mm diameter rigid PVC conduit of medium gauge having ISI and FIA approval with all necessary accessories.
55
-
-
... More
Supplying and Providing mains with 4 nos. of 6 sq mm Cu. PVC insulated flexible wire with ISI and FIA approval for 650 V/ 1100 V and 2 nos 2.5 sqmm Cu. PVC insulated flexible wires with ISI approval for 650 V/ 1100 V as earth wires to be drawn in 40 mm diameter rigid PVC conduit of medium gauge having ISI and FIA approval with all necessary accessories.
357.5
-
-
... More
Supplying and Laying mains with 2 nos. of 10 sq mm Cu. PVC insulated flexible wire with ISI and FIA approval for 650 V/ 1100 V and 1 no 6.0 sqmm Cu. PVC insulated flexible wires with ISI approval for 650 V/ 1100 V as earth wires to be drawn in 25 mm diameter rigid PVC conduit of medium gauge having ISI amd FIA approval with all necessary accessories.
10
-
-
... More
Supplying and Providing mains with 2 nos. of 6 sq mm Cu. PVC insulated flexible wire with ISI and FIA approval for 650 V/ 1100 V and 1 nos 4.0 sqmm Cu. PVC insulated flexible wires with ISI approval for 650 V/ 1100 V as earth wires to be drawn in 25 mm diameter rigid PVC conduit of medium gauge having ISI and FIA approval with all necessary accessories.
357.5
-
-
... More
Supplying and Providing mains with 3 nos. of 4 sq mm Cu. PVC insulated flexible wire with ISI and FIA approval for 650 V/ 1100 V and be drawn in 25 mm diameter rigid PVC conduit of medium gauge having ISI and FIA approval with all necessary accessories.
10
-
-
... More
Supplying and Providing mains with 3 nos. of 2.5 sq mm Cu. PVC insulated flexible wire with ISI and FIA approval for 650 V/ 1100 V and be drawn in 25 mm diameter rigid PVC conduit of medium gauge having ISI and FIA approval with all necessary accessories.
10
-
-
... More
Supplying and Providing mains with 3 nos. of 1.5 sq mm Cu. PVC insulated flexible wire with ISI and FIA approval for 650 V/ 1100 V and be drawn in 25 mm diameter rigid PVC conduit of medium gauge having ISI and FIA approval with all necessary accessories.
55
-
-
... More
7.3 Race way Supply and installation of 3 compartment 225 mm x 38 mm under floor metal trucking/race way with all accessories made out of hot dip pre galvanized metal coated steel sheet equivalent to MK Ega (novar) make.
110
-
-
... More
Supply and installation of 1 compartment 100 mm x 38 mm under floor metal trunking/race way with all accessories made out of hot dip pre galvanized metal coated steel sheet equivalent to MK Ega (Novar) make.
27.5
-
-
... More
Supply and installation of 3 compartment Access outlet / service box of 250 x 250 x 60-75 mm with all accessories made out of high pressure die cast material suitable for above race ways equivalent to MK Ega (Novar) make.
38.5
-
-
... More
Supply and installation of 3 compartment 100 mm x 50 mm wall trunking/race way with cover and all accessories made out of PVC equivalent to MK (premier) make.
110
-
-
... More
Section 8.00 Light Fixtures & Fans Supplying, erecting, connecting, testing and commissioning of Following type Light Fixture with all necessary Hardware, Internal Wiring with Lamp, Ballast etc. all required accessories Complete in all respect. Cost includes wiring from outlet point to light fixtures and also wiring from first light fixtures to second light fixtures wherever provided on back to back (touching each other) arrangements. Any kind of light fixture Type - A with lamp with basic rate of Rs 3000/- ( up to 4500)
40.7
-
-
... More
Any kind of light fixture Type - B with lamp with basic rate of Rs 6000/- ( Above 4500 & up to 8000)
63.8
-
-
... More
Any kind of light fixture Type - C with lamp with basic rate of Rs 10000/- (Above 8000)
110
-
-
... More
8.2 - Supply, Installation, testing and commissioning following sizes ceiling Fans without fan regulator. 36/42" Dia Sweep Ceiling Fan with Fan Hook as per approved color & equivalent to Crompton make high speed type...
2
-
-
... More
48" Dia Sweep Ceiling Fan with Fan Hook as per approved color & equivalent to Crompton make high speed type...
40
-
-
... More
56" Dia Sweep Ceiling Fan with Fan Hook as per approved color & equivalent to Crompton make high speed type...
2
-
-
... More
Additional fan rod made out of 10 gauge GI pipe with all necessary painted and required accessories for fan suspension.
44
-
-
... More
8.3 Supply, Installation, testing and commissioning of following sizes Exhaust Fans of approved make Light duty 225/305 mm. diameter propeller exhaust fans single phase 1400 RPM.
1
-
-
... More
Heavy duty 305 mm. diameter propeller exhaust fans single phase 1400 RPM.
1
-
-
... More
Heavy duty 450 mm. diameter propeller exhaust fans single phase 1400 RPM. With M.S. louver shutter of the exhaust fan
2
-
-
... More
Section 9.00 Earthing 9.1 Providing earthing stations for equipment earthing as shown and specified in drawing for equipment complete with : 3Mtr long Copper Bonded Earth Rod 10'' x 5/8" made from high tensile low carbon steel and each rod should molecularly bonding 99.9% + 30Kg RESLO Earthing. LPI pure electrolytic copper to the low carbon steel core in accordance with national and international standards such as BS6651, BS7430 and UL467. LPI''s Resistance Lowering Compound (RESLO-20Kg) comprises specifically selected compounds, which possess excellent electrical conductivity. Equivalent to Model: LPI 3Mtr CBR+ 20 Kg RESLO.
3
-
-
... More
9.2 Earth wire/strips : Supply and laying cu. earthing required size strips for interconnecting the earthing stations, panels, DB''s etc. in built up trenches, on walls/ceiling, buried in ground generally as specified and shown on drawings complete with : a) Fixing accessories. b) Corrosion protection of buried conductors with bituminous coating and covered with PVC tapes. 25 x 3 mm cu. Strip
385
-
-
... More
32 x 3 mm cu. Strip
10
-
-
... More
50 x 6 mm cu. Strip
10
-
-
... More
50 x 6 mm GI. Strip
55
-
-
... More
No.8 gauge bare GI. earth wire
198
-
-
... More
Earth Link : 38mm x 6 mm 1ft Long Cu.earth link fixed by necessary screws on wall.
2.2
-
-
... More
Section 10.00 Miscellaneous 10.1 - PVC PIPES Supplying and laying following sizes PVC pipe of approved make in open / recess manner including excavation and back filling (if required) as per layout and drawing and re-filling the trenches etc. complete as directed. Medium gauge (LMS) pipe in Open / Concealed manner minimum 25 mm dia with GI pulling wire.
55
-
-
... More
Heavy gauge pipe (HMS) in Open / Concealed manner minimum 25 mm dia with GI pulling wire.
110
-
-
... More
Heavy gauge pipe in Open / Concealed manner minimum 32 mm dia with GI pulling wire.
165
-
-
... More
Heavy gauge pipe in Open / Concealed manner minimum 40 mm dia with GI pulling wire.
55
-
-
... More
Heavy gauge pipe in Open / Concealed manner minimum 50 mm dia.
10
-
-
... More
Heavy gauge pipe in Open / Concealed manner minimum 75 mm dia.
10
-
-
... More
Heavy gauge pipe in Open / Concealed manner minimum 100 mm dia.
5.5
-
-
... More
Heavy gauge pipe in Open / Concealed manner minimum 150 mm dia.
5.5
-
-
... More
Extra over rate for Supply & laying of 25 mm dia. heavy gauge rigid PVC pipe in Open/conceal manner instead of Medium Gauge Pipe. This will apply wherever conduits to be laid instead of medium gauge pipe specified in the 7.0 ( internal wiring )
10
-
-
... More
Extra over rate for Supply & laying of 32 mm dia. heavy gauge rigid PVC pipe in Open/conceal manner instead of Medium Gauge Pipe.
10
-
-
... More
Extra over rate for Supply & laying of 40 mm dia. heavy gauge rigid PVC pipe in Open/conceal manner instead of Medium Gauge Pipe.
10
-
-
... More
Supplying & Erecting Rubber mat 1.1 KV grade ISI marked 1000 x 2000 x 6 mm size.
2
-
-
... More
10.2 Fire Stopper Equivalent to Hilti make Hilti Mineral Wool Board System Providing Fire resistant board system with minimum 2 hours fire rating when tested in accordance with BS 476 part 20 for horizontal openings in fire rated floors or slabs and vertical openings in walls for passing service shafts. The fire resistant board system shall comprise of a mineral wool board coated with an ablative coating CP 670 at 0.7mm dft. The mineral wool board should be of min.160 kg/m3 density. All contact surfaces and cavities shall be sealed with a joint filler CP 606. The service lines could be of various types like electrical cables trays, metal pipes, etc. The product shall be age tested for as per Dafstb and DIBT standards. The product should be tested for mold resistance rating of 0 as determined by ASTM G21-96 and should have a VOC content of approx. 38 g/l as per LEED 2009. The product shall bear the UL and FM approval logo on the packing where applicable.
3.3
-
-
... More
Equivalent to Hilti make CP 636 Fire stop Mortar Providing & fixing Fire Barrier mortar with minimum 2 hours fire rating when tested in accordance with BS 476 part 20 and UL 1479 for horizontal openings in fire rated floors or slabs and vertical openings in walls for passing service shafts. The service lines could be of various types like electrical cables trays, metal pipes, GI Ducts for AC, etc. The product shall be age tested as per Dafstb and DIBT standards. The product should be tested for mold resistance rating of 0 as determined by ASTM G21-96. The product shall be tested and approved by third party agencies such as UL and FM. The mortar should be tested in accordance with IEC 60068-2-57:1999-11 (Environmental Testing) as per Part 2-57: Test for Vibration-Time-history method and VERTEQII for seismic zone 4. The product shall bear the UL and FM approval logo on the packing where applicable.
2.2
-
-
... More
Equivalent to Hilti make CP 620 Expanding Seal Providing Fire expanding foam with minimum 2 hours fire rating when tested in accordance with BS 476 part 20 and UL 1479 for horizontal openings in fire rated floors or slabs and vertical openings in walls made of concrete/ masonry or Gypsum for passing service shafts. The expanding foam expands seven times its volume to fill the cavity at the time of dispensing the material and shall fully cure within two minutes after dispensing. The product shall be age tested as per Dafstb and DIBT standards. The product shall provide water tightness when tested for W rating as per UL standards and shall be tested for providing a sound insulation of 50 db when tested in accordance with ASTM E 90. The product should be tested for mold resistance rating of 0 as determined by ASTM G21-96 and should have a VOC content of approx. 1.3 g/l as per LEED 2009. The product shall be tested and approved by third party agencies such as UL & FM. The product should be tested in accordance with IEC 60068-2-57:1999-11 (Environmental Testing) as per Part 2-57: Test for Vibration-Time-history method and VERTEQII for seismic zone 4. The product shall bear the UL and FM approval logo on the packing where applicable.
4
-
-
... More
Equivalent to Hilti make CP 678 Cable coating Provide and apply intumescent based coating on cables/ cable tray along the horizontal runs at every 10 mtr in case of horizontal runs, every 5m in case of vertical runs and tee-offs shall be provided at intervals of 30mtr. The coating shall have a density in the range of 1.2 to 1.4 Kg/ L. The coating shall be non-toxic, asbestos and halogen free and shall have good mechanical strength. The coating shall comply with IEC 332 part 3 (1992). The product should be tested for mold resistance rating of 0 as determined by ASTM G21-96 and should have a VOC content of approx. 60 g/l as per LEED 2009. The coating should not have any de-rating effect on the cable and should support relevant certificates for these attributes.
5.5
-
-
... More
Section 11.00 ELV Service Works Heavy gauge pipe (HMS) in Open / Concealed manner minimum 25 mm dia with GI pulling wire.
825
-
-
... More
Medium gauge (LMS) pipe in Open / Concealed manner minimum 25 mm dia with GI pulling wire.
2530
-
-
... More
Supply and laying 4 pair CAT6 Unshielded Twisted Pair (U/UTP) Cable, 23 AWG LSZH type, Meets or exceeds ANSI/TIA-568-C.2 , and with UL Listed & RoHS Compliant ts should be available. in prelaid PVC conduits / pipes / raceway, but without the cost of raceway or pipe. (The cable is to be drawn from individual workstation/device/desktop area to the central communications/server room. Terminations to be carried out in any intermediate wiring closets/telecom closets by way of racks/MDF/IDF)_Data, Voice, Wi-Fi, CCTV Cabling, for details description refer tender specification.
3327.5
-
-
... More
Supply, Installation, Testing & Commissioning of Single UTP CAT6 RJ-45 I/O of specified make inclusive of termination of CAT6 cable at each IO at workstation area / device / desktop/Data, for details description refer tender specification
55
-
-
... More
Supply, Installation, Testing & Commissioning of Single UTP CAT6 RJ-45 I/O of specified make inclusive of termination of CAT6 cable at each IO at equipment side for details description refer tender specification
55
-
-
... More
Supply, Installation, Testing & Commissioning of CAT6 UTP RJ-45 Patch Cords Solid Conductor 3ft for data (Hub Side)-Data as per tender specification.
55
-
-
... More
Supply, Installation, Testing & Commissioning of CAT6 UTP RJ-45 Patch Cords Solid Conductor 7ft for Data (User Side)- Data as per tender specification.
55
-
-
... More
Supply, Installation, Testing & Commissioning of unloaded UTP CAT6 Gigabit Modular Patch Panel for 24 ports in 1U form factor as per the tender specifications, with universal A/B labeling and 110 connector terminations on rear of panel allowing for quick and easy installation of 23 AWG cable.-Data includes Data, Voice, CCTV, Wi-Fi for details description refer tender specification.
2
-
-
... More
Supply, Installation, Testing & Commissioning of Singlex Face Plate for mounting IO with required back box, for details description refer tender specification
30
-
-
... More
Supply, Installation, Testing & Commissioning of Duplex faceplate for mounting IO with required back box, for details description refer tender specification
5
-
-
... More
Supply, Installation, Testing and Commissioning of Two 15 AWG conductors non- plenum Speaker Cable, for High performance cable for audio signals & PA System for details description refer tender specification
550
-
-
... More
Section 12.00 Removing Work Removing and Stacking/Shifting of below mentioned Cables from Existing Cable Tray, Trench or Shaft Aluminum Cables 70 sq.mm x 3.5 c Al.
135
-
-
... More
50 sq.mm x 3.5 c Al.
80
-
-
... More
25 sq.mm x 3.5 c Al.
10
-
-
... More
Copper Cables 10 sq.mm x 4 c Cu. cable
110
-
-
... More
6 sq.mm x 4 c Cu. cable
10
-
-
... More
4 sq.mm x 4 c Cu. cable
10
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements