Municipal Corporation Tender

Filling in foundation and plinth with murrum or selected soil in layers of 20cm. thickness including watering, ramming and consolidating etc. complete.

P.C.C. (1:3:6) Providing and laying machine mixed, machine vibrated plain cement concrete with 30 mm size machine crushed black trap metal in all types of floors and foundation, with or without nominal steel reinforcement as per design/drawing including, levelling, consolidation, using etc complete at all levels (rates excluding reinforcement) in proportion 1:3:6 (M-10).

P.C.C. (1:2:4) Providing and laying machine mixed, machine vibrated plain cement concrete with 30 mm size machine crushed black trap metal in all types of floors and foundation, with or without nominal steel reinforcement as per design/drawing including, levelling, consolidation, using etc complete at all levels (rates excluding reinforcement) in proportion 1:2:4 (M-15).

Providing and laying dholpur stone CLADING over 20mm (average)base of cement mortar 1:6 (1-cement : 6 coarse sand) or L.M. 1:1.5(1- lime putty : 1.5 - coarse sand) laid and jointed with gray cement slurry including rubbing and polishing complete. (A) dholpur slab 25mm thick.

PAVER BLOCK: Providing and laying random pattern & grey, red, black and brown colored Rubber Mould Paver Block, 60 mm thick and strength of M40 pnumatic compressed by mechanically pressed and as per approved design including 75mm Sand layer for levelling and filling the joint with sand in proper line and level etc complete.The pattern, Design and colour must be as per Archetects Design.

PRE CAST KERB STONE: Providing and fixing pre cast kerb stone of 300mm x 450 mm size (100 mm. thick) and strength of M20, chisseled finish on outside, setting in position, jointed with grey cement slurry including rubbing and polishing complete.

Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of 3 Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses, with toughened glass with company mark/name engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD 10 %, CCT 3000 K to 5700K,Uniformity ratio 0.45, Luminaire efficacy 100 lumens/watt . LED driver efficiency 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity between the ranges shown.) (C) Post Top Lantern LED fitting comprises of finish cast aluminum spigot and spun aluminum canopy fixed with opal polycarbonate, pipe arrangement for vertical mounting driver and accessories wired upto terminal block.IP 65 (ii)32-40W Cat-ll

Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of 3 Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses, with toughened glass with company mark/name engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD 10 %, CCT 3000 K to 5700K,Uniformity ratio 0.45, Luminaire efficacy 100 lumens/watt . LED driver efficiency 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity between the ranges shown.) (C) Post Top Lantern LED fitting comprises of finish cast aluminum spigot and spun aluminum canopy fixed with opal polycarbonate, pipe arrangement for vertical mounting driver and accessories wired upto terminal block.IP 65 (ii)20-30W Cat-ll

Dismentaling the existing structure including removing and stacking the dismentelled materials as and where directed. (A) R.C.C. work / PAVER CARPET