Ministry Of Road Transport And Highways Tender

Earthwork for embankment including breaking clods, dressing with all lead and lift including watering, rolling, and consolidation of sub grade in layer and consolidation of sub grade in layers at O.M.C. to required dry density including filling the depressions which occur during the process using power roller 8 t to 10 t (B) from borrow area. with all lead and lift

Box cutting the road surface to proper slop and camber for making a base of road work including removing the excavated stuff and depositing on the road side slope as directed. with all lead and lift

Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause [ Coarse Sand ]

Construction of granular sub-base (Gr : I) by providing coarse graded material combination of B.T.M.C. aggregates and Sand spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401. (Table:- 400- 2) Grading : I

Providing and laying W.B.M. of B.T.M.C. metal of size 45 mm to 63 mm size including 20% Grit {Stone screening} & stone dust as filler including spreading, watering & consolidation by vibratory roller 80KN to 100KN static weight.

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.

Providing and applying primer coat with bitumen emulsion SS-1 on prepared surface of granular sub base including clearing the road surface and spraying primer at the rate of 7.50 Kg. / 10 Sq.Mt.

Providing and applying Tack coat with bitumen VG 10 on prepared surface of B.T Surface including clearing the road surface and spraying tack Coat at the rate of 2.50 Kg. / 10 Sq.Mt.

Providing and laying 37.5 mm thick bituminous macadam with B.T. Aggregates as per M.O.R.T.& H gradation and Asphalt grade VG- 30 for mixing @ 34.00 Kg. / M.T. i.e. 3.4% by total weight of the mix and, including heating the aggregates and asphalt by continuous batching of drum mix plant and spreading the same by paver finisher and consolidation with vibratory roller 80 to 100 KN static weight including providing all materials, equipments, tools and plant, oil, kerosene, firewood, labour charges etc. comp. using contractor's own machineries, drum mix plant and paver finisher etc. complete.

Providing and laying 50 mm thick D.B.M. with B.T. Aggregates as per M.O.R.T.& H gradation and Asphalt grade VG- 30 for mixing @ 45 Kg. / M.T. i.e. 4.5% by total weight of the mix and, including heating the aggregates and asphalt by continuous batching of drum mix plant and spreading the same by paver finisher and consolidation with vibratory roller 80 to 100 KN static weight including providing all materials, equipments, tools and plant, oil, kerosene, firewood, labour charges etc. comp. using contractor's own machineries, drum mix plant and paver finisher etc. complete.

Providing & Laying 30 mm thick Bituminous concrete on existing bituminous surface using graded machine crushed as per MORT & H gradation & specification & Asphalt grade VG- 30 for mixing @ 55 Kg./ M.T. i.e. 5.5 % by Weight of total mix including heating the aggregate & asphalt in continuous batching drum mix plant, transporting the mix and spreading the same by paver finisher & consolidation with vibratory roller including providing all materials equipments, tools & plants , fire wood, oil , kerosene, labour charges etc. complete using contractor's own machinery drum mix plant & paver finisher etc. complete. Add Water Proofing Materials saline neno technology @ 0.10% by total weight of mix.

Supplying, Stacking and Spreading of Quarry Spalls on site of work for hard side shoulders including Rolling & Watering as directed by the Engineer in charge.

Supplying and fixing reinforced concrete heavy duty non-pressure pipes with collars for culverts including setting and joining the pipes in C.M. 1:2 watering and laying (To level of slops of I.S. 458 / 1971 Class NP3 casted by vertically vibrated technology of following internal diameter. (i) 300 mm dia.

Excavation for foundation upto 1.5 M. depth including sorting out and stacking of useful materials and disposing of excavated stuff with all lead and lift. (A) Loose or Soft Soil

Providing and laying cement concrete 1:4:8 (1cement : 4coarse sand : 8 B. T. Crushed stone aggregates 40 mm. nominal size) and curing complete excluding cost of from work in : (a) Foundation and plinth

Providing and casting in situ ordinary cement concrete M. 150 mix and providing necessary pin headers including shuttering scaffolding laying vibrating curing and finishing complete. Without V-Grooves. (A) All Height

Supplying and fixing reinforced concrete heavy duty non-pressure pipes with collars for culverts including setting and joining the pipes in cm. 1:2 watering and laying (to level or slops) of I.S.458/1971 Class NP 3 Casted by vertically vibrated technology of following internal diameters. 900mm dia

Providing and laying in position FE 415 TMT bar reinforcement including cutting, bending, hooking and tying complete as per detailed drawings for the following. For RCC Raft, Pier, Top Slab, Cuttoff walls etc. comp.

Village Name Sign :- Providing and fixing sign boards made out of 2mm aluminium sheet / 4mm ACP (Aluminium composite Panel); size 90x60 cms. rectangular as per design of IRC-67-2012. Pre treated with phospheting process & acid etching; coated with one coat of epoxy primer and two coats of best quality epoxy paint ;reflectorised with Micro Prismatic Grade retro refiective sheeting of Type-11 as per ASTM D- 4956 and latest M.O.S.T. Specifications; 3.3mtr long stand post of 75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame fabricated from suitable size iron angle of 35 x 35 x 3mm; painted with best quality epoxy coatings in black and white bends. The details of symbol or inscription/letters / numerals for each board shall be as per the instruction of engineer in charge. The fixing at site shall be in 1:2:4 CC block of size 45 x 45 x 60 Cms. for each leg including excavation, curing etc. complete under the supervision of engineer in charge. A warranty for 10 years for the Retro reflective sheeting from original manufacturer & a certified copy of 3 year outdoor exposure test report from third party test lab for the product offered shall be submitted by contractor. (A) Class-C Type-11 Retro Reflective sheeting.

Direction (Junction) Sign :- Providing and fixing sign boards made out of 2mm aluminium sheet / 4mm ACP (Aluminium composite Panel); size 244x122 cms. rectangular as per design of IRC- 67-2012. Pre treated with phospheting process & acid etching; coated with one coat of epoxy primer and two coats of best quality epoxy paint ;reflectorised with Micro Prismatic Grade retro refiective sheeting of Type-11 as per ASTM D- 4956 and latest M.O.S.T. Specifications; 4.0mtr long (2 Nos.) stand post of 75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame fabricated from suitable size iron angle of 50 x 50 x 5mm; painted with best quality epoxy coatings in black and white bends. The details of symbol for each board shall be as per the instruction of engineer in charge. The fixing at site shall be in 1:2:4 CC block of size 45 x 45 x 60 Cms. for each leg. including excavation, curing etc. complete under the supervision of engineer in charge. A warranty for 10 years for the Retro reflective sheeting from original manufacturer & a certified copy of 3 year outdoor exposure test report from third party test lab for the product offered shall be submitted by contractor. (A) Class-C Type-11 Retro Reflective sheeting

Hazard Marker Sign :- Providing and fixing sign boards made out of 1.5mm aluminium sheet / 3mm ACP (Aluminium composite Panel); size 90x30 cms. rectangular as per design of IRC-67- 2012. Pre treated with phospheting process & acid etching; coated with one coat of epoxy primer and two coats of best quality epoxy paint ;reflectorised with Micro Prismatic Grade retro refiective sheeting of Type-11 as per ASTM D- 4956 and latest M.O.S.T. Specifications; 1.8mtr long stand post of 75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame fabricated from suitable size iron angle of 35 x 35 x 3mm; painted with best quality epoxy coatings in black and white bends. The details of symbol for each board shall be as per the instruction of engineer in charge. The fixing at site shall be in 1:2:4 CC block of size 45 x 45 x 60 Cms. for each leg. including excavation, curing etc. complete under the supervision of engineer in charge. A warranty for 10 years for the Retro reflective sheeting from original manufacturer & a certified copy of 3 year outdoor exposure test report from third party test lab for the product offered shall be submitted by contractor. (A) Class-C Type-11 Retro Reflective sheeting.

Curve/Cautionary Warning Sign :- Providing and fixing sign boards made out of 2mm aluminium sheet / 4mm ACP (Aluminium composite Panel); size 90 x 90 x 90 cms. equilateral triangle as per design of IRC-67-2012. Pre treated with phospheting process & acid etching; coated with one coat of epoxy primer and two coats of best quality epoxy paint ;reflectorised with Micro Prismatic Grade retro refiective sheeting of Type-11 as per ASTM D-4956 and latest M.O.S.T. Specifications; 3.6mtr long stand post of 75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame fabricated from suitable size iron angle of 35 x 35 x 3mm; painted with best quality epoxy coatings in black and white bends. The details of symbol for each board shall be as per the instruction of engineer in charge. The fixing at site shall be in 1:2:4 CC block of size 45 x 45 x 60 Cms. for each leg. including excavation, curing etc. complete under the supervision of engineer in charge. A warranty for 10 years for the Retro reflective sheeting from original manufacturer certified copy of 3 year outdoor exposure test report from third party test lab for the product offered shall be submitted by contractor. (A) Class-C Type-11 Retro Reflective sheeting.

Providing and fixing ordinary Kilometer stone of precast C.C. 1:2:4 including necessary reinforcement as per I.R.C. type design in C.C. 1:4:8 including painting and lettering etc. complete.

Providing and fixing 5th Kilometer stone of precast C.C. 1:2:4 including necessary reinforcement as per I.R.C. type design in C.C. 1:4:8 including painting, lettering etc. complete (For N.H., S.H. and M.D.R.)

Providing and fixing Hectometer stone of precast C.C. 1:2:4 including necessary reinforcement as per I.R.C. type design in C.C. 1:5:10 including painting and lettering etc. complete.

Road marking with hot applied thermoplastic compound with reflectorising glass Beads on Bituminous surface Providing and laying hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads @ 250 gms per Sq.Mt. area thickness of 2.5mm is exclusive of surface applied glass beads as per IRC 35. The finished surface to be level uniform and free from streaks and holes.

Providing A fixing cats eye / pavement marker ( MMC vial less ) made out of acrylic strene acrylonitrile or hi-impact polystyrene fitter with molded of methacrylate (MMC) reflector cube corner reflector design filled with tightly adhering potting compound as per ASTM D 788 size 8 cms x 8 cms x 1.5 cms provided with bituminous adhesive in sufficient quantity with each unit for fixing no nail should be allowed for fixing. reflectors on both sides minimum reflective area 12.9 sq.cm on each face. compressive strength 13 tonnes at 230 C temperature (B) Double side lenses

Providing, fabrication, erecting and fixing 12 mt span portal mount gantry using structure steel M.S. pipe plates etc. as per detailed drawing & as directed including retro reflective letter & epoxy painting as per MORTH & clause 801 including providing excavation & necessary reinforcement as per design etc. complete.

Providing and fixing pre cast indicator stone as per IRC type design including white washing etc. complete (1) Fixing in earth

Chevron sign board/ Route Marker sign :- Providing and fixing sign boards made out of 1.5mm aluminium sheet / 3mm ACP (Aluminium composite Panel); size 60x45 cm. rectangular plus 30X25cm additional plate as per design of IRC-67-2012. Pre treated with phospheting process & acid etching; coated with one coat of epoxy primer and two coats of best quality epoxy paint ;reflectorised with Micro Prismatic Grade retro refiective sheeting of Type-11 as per ASTM D- 4956 and latest M.O.S.T. Specifications; 3.6mtr long stand post of 75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame fabricated from suitable size iron angle of 35 x 35 x 3mm; painted with best quality epoxy coatings in black and white bends. The details of symbol or inscription/letters / numerals for each board shall be as per the instruction of engineer in charge. The fixing at site shall be in 1:2:4 CC block of size 45 x 45 x 60 Cms. for each leg including excavation, curing etc. complete under the supervision of engineer in charge. A warranty for 10 years for the Retro reflective sheeting from original manufacturer & a certified copy of 3 year outdoor exposure test report from third party test lab for the product offered shall be submitted by contractor. (A) Class-C Type-11 Retro Reflective sheeting.

Place identification sign :- Providing and fixing sign boards made out of 2mm aluminium sheet / 4mm ACP (Aluminium composite Panel); size 150 x 90 cms. rectangular as per design of IRC-67-2012. Pre treated with phospheting process & acid etching; coated with one coat of epoxy primer and two coats of best quality epoxy paint ;reflectorised with Micro Prismatic Grade retro refiective sheeting of Type-11 as per ASTM D- 4956 and latest M.O.S.T. Specifications; 4.0mtr long ( 2 Nos) stand post of 75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame fabricated from suitable size iron angle of 35 x 35 x 3mm; painted with best quality epoxy coatings in black and white bends. The details of symbol or inscription/letters / numerals for each board shall be as per the instruction of engineer in charge. The fixing at site shall be in 1:2:4 CC block of size 45 x 45 x 60 Cms. for each leg including excavation, curing etc. complete under the supervision of engineer in charge. A warranty for 10 years for the Retro reflective sheeting from original manufacturer & a certified copy of 3 year outdoor exposure test report from third party test lab for the product offered shall be submitted by contractor. (A) Class-C Type-11 Retro Reflective sheeting.

Total in Figure

Total in Words