Military Engineer Services Tender

... More
The MES has issued a formal invitation for competitive bids for the Military Engineer Services project, for Special Repair / Replacement Of Rusted Column Pipes, Redevelopement Of Borewells And Other Connected Work At Zone A Under Ge (army) Ahmedabad in Ahmedabad, Gujarat, with an estimated contract value of Rs. 47,57,000. The bid opening date for this tender is 31-10-2026 and the last date for bid submission is 19-11-2026. Interested bidders for Military Engineer Services tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.

Military Engineer Services - MES Tender - Gujarat Tender

Opening Date31 Oct 2026
Closing Soon19 Nov 2026
Tender Amount₹ 47,57,000 
Notes
Download

Costs

Description

Special Repair / Replacement Of Rusted Column Pipes, Redevelopement Of Borewells And Other Connected Work At Zone A Under Ge (army) Ahmedabad

Contact

Unlock the Tender details

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

Unlock the Tender details
... More
M & L for lowering of sounding tape to measure initial depth of silt level and setup a tripod rig / Machanical winch / Hiring to Crane and lowering the Boogie (Bailer) assembly and cleaning and desilting of borewell by Boogie method, including lifting of accumalated sand, clay, slush, silt, rock cutting, drill cuttings and foreign matter from depth of bore well and achieving full possible bottom and safe disposal of removed silt / slurry / waste water clear of the work area complete all as specified and directed.

4

100

-

... More
Supply, fabrication and installation of M.S. Column pipe of size 4" (100 mm Nominal Bore), Mild Steel (MS), Electric Resistance welded (ERW) pipe conforming to IS:1239 (Part-1) class C ( Heavy duty) 3 Mtr long, complete with heavy-duty M.S. flanges of 16mm thick, 215mm outer dia welded at every joint with column pipe seamless and bolted with 06 Nos M.S./G.I. nut-bolts M16 x 60mm wth high-tensile grade spring washer and rubber gasket to form a leak-proof joint capable of carrying the full column weight and pump thrust load and welded 100 mm x 40 mm x 5 mm thick flat iron strip between flang and MS pipe to increase load bearing capacity of the column pipe including making suitable size of cable slot in flange for protection copper flat cable upto 16 sqmm 3 core complete all as specified and directed.

560

100

-

... More
Fabricating, supplying, and fixing heavy-duty split-type Mild Steel (MS) flat iron borewell head clamp assembly, suspend and hold a 100 mm (4") Nominal Bore MS column pipe to a depth of 150 metres along with a 4-inch diameter submersible pump set, resting securely on top of the borewell casing pipe.​The clamp assembly shall be fabricated from high-yield MS flat minimum section size of 75 mm (width) and 12 mm (thickness). The clamp shall be precision hot-bent/machined into two symmetrical halves to fit snugly under the socket/flange of the 100 mm column pipe, complete with 4 Nos. pre-drilled bolt holes including clamped firmly using 4 Nos. High-Tensile M16 / M20 Hexagonal Bolts of requisite length, and 4 Nos. matching heavy-duty Hex Nuts and 8 Nos. thick spring/flat washers and painted with two coats of red-oxide zinc-chromate primer followed by two coats of heavy-duty anti-corrosive epoxy paint complete all as specified and directed

4

100

-

... More
M&L for carry out Yield test for the borewell by continously pumping for 12 hours to determine safe yield and testing of water from AMC/Govt approved test Lab/PHED state deptt for its portability and other parameter as desired for safe drinking of water complete all as specified and directed. (Note : Cost/Charges of water test report from AMC/Govt approved test Lab/PHED state deptt shall be deemed to be included in the quoted unit rate of this item)

4

100

-

... More
Supply, installation, testing, and commissioning of heavy-duty Grey Cast Iron Ball Type Foot Valve of size 150mm, complete with integral cast iron strainer, flanged end connection conforming upto PN 6 working pressure ratings, floating nitrile rubber coated reinforced ball mechanism, including all required gaskets, high-tensile fasteners, nut, bolt & washer including T&P and labor for structural alignments for complete suction-end pump fitment complete all as specified and directed.

5

100

-

... More
Supply, laying, jointing, alignment, welding, testing, and commissioning of 150 mm Nominal Bore (NB) Mild Steel (MS) Electric Resistance Welded (ERW) pipes Heavy duty - Class C including supply and installation of all required MS specials and fittings (bends, equal/unequal tees, reducers), MS slip-on flanges, 3 mm thick compressed fiber gaskets, High Tensile fasteners, complete edge preparation, multi-pass field welding with approved electrodes, surface preparation, and applying anti-corrosive painting over the surface of MS pipe, and connected with existing suction / discharge side of pump properly complete in all respects and as specified and directed.

18

100

-

... More
Supplying, lowering, erecting, testing, and commissioning of heavy-duty water-filled 3-phase submersible pump set of having a 41 HP (30 kW) motor power rating operating on 415V (±10%), 3-Phase, 50 Hz , with 10 stage pump suitable for installation in a 300 mm (12 inch) nominal diameter borewell casing, designed to deliver a water discharge of 550 LPM to 1330 LPM against a total dynamic head operating head range 140 mtr to 210 mtr including connecting with 3 core copper flat submersible cable with waterproof resin cable jointing kits complete in all respects as specified and directed. Make : KSB (PUMP Model: UPHA 293/10 coupled with Motor Model: HBCN 413) or equivalent model in Kirloskar / CRI / Texmo

4

100

-

... More
Supplying,lowering & Fixing flexible flat copper submersible cable, 3 Core x 16 sq. mm 1100V (1.1 kV) grade heavy-duty insulated with water and moisture-resistant PVC compound with color-coded cores (Red, Yellow, Blue), and sheathed overall with a tough, water-impermeable, abrasion-resistant black/blue flat PVC compound designed for continuous underwater duty in deep borewells including clipping along the riser MS column pipe and testing before and after lowering, complete all as specified and directed.

990

100

-

... More
Supplying & lowering of safety wire rope 8 mm diameter high-tensile Stainless Steel grade SS 304 as a secondary safety suspension line for deep borewell submersible pumpsets; manufactured with flexible 7x19 construction having a minimum breaking load capacity of not less than 3,500 kg (35 kN) to safely sustain the dead weight of the pump, motor, column pipes, and water column; complete with heavy-duty thimbles, SS 304 U-bolt wire rope clamps (minimum 3 Nos. at each termination end), SS 304 D-shackles, top head-frame anchoring hardware, strapping to the riser column pipe at regular intervals of 3 meters, tensioning, testing, and commissioning complete in all respects and as specified and directed.

580

100

-

... More
Supply, installation, testing, and commissioning of a fully automatic, factory-assembled Star-Delta motor starter panel suitable for heavy-duty 45 HP (33.5 kW), 3-phase, 415V ±10%, 50 Hz AC submersible and centrifugal pump motors. The panel shall be housed in a dust- and vermin-proof wall/floor-mounting enclosure fabricated from minimum 1.6 mm / 2.0 mm thick CRCA sheet steel, chemically pre-treated and powder-coated with IP54/IP55 protection standards. The complete company-assembled unit shall comprise: (a) Incomer MCCB 100 Amps 3 Pole 16 KA as main isolator/short-circuit protection, (b) Power contactors 65 Amps, 3 pole heavy-duty, 415 volt (Main, Star, Delta), - 03 Nos and 1 No. bimetallic thermal overload relay (range 30A–50A) with built-in single-phase protection and manual/auto reset. (c) Electronic Star-Delta timer (1–30 seconds adjustable) - 1 No. (d) Voltage & Phase Sensing Single Phase Preventer (SPP) with phase failure, phase reversal, and unbalance protection and 1 No. Water Level Controller / Dry-Run Protection Relay compatible with sensor probes for submersible pump protection. (e) Analog Ammeter (0–100A) with suitable CTs (100/5A), of size 72×72 mm square (f) Voltmeter (0–500V) with selector switch, (g) Heavy-duty Start/Stop push buttons, and LED panel indication lamps (Phase presence R-Y-B, Run, Stop, Trip, Dry-Run) and Control MCB, (h) Internal Wiring & Earthing: Heavy-duty 25 sq. mm FRLS flexible copper power wiring, crimped copper lugs, DIN-rail mounted terminal blocks, and dual internal earthing studs.

1

100

-

... More
Fabrication, supply, installation, testing and commissioning electrical Indoor cubical control panel board, CPRI approved factory assembled floor mounted weather and vermin proof, size 1050 x 900 x 450mm, fabricated with 2.0mm CRCA MS sheet of suitable size,3 phase 4 wire 415 Volt ac 50 Hz complete duly painted with powder coating complete with locking arrangement, earthing terminals with suitable rating of insulate color code copper wire for outgoing from MCCB to MPCB including and Mounting measuring instrument such as digital Volt meter, digital Ammeter, Selector switchs, CT's -03 Set, LED Phase indicator lamps with holder , Stop & Strat button with ON/OFF LED indicator, toggle switch etc including incoming and outgoing cables connections with suitable cable glands and end termination including grouting of feeder pillar box 45 cm above ground level by providing 75 cm long angle iron size 40x40x5mm welded on all four corner embedded in PCC (1:2:4) using 20mm graded complete all as specified and directed. ( Feeder piller box shall be consisting the following) (a) 4 Nos wire high conductivity aluminium busbar, properly insulated and colour coded, 03 Nos for phases (RYB) rating 125 Amps and 01 No neutral connected with MCCB rating and duly supports (b) MCCB FP 125 amps, 25 KA, 415 volts, 50Hz (Thermal magnetic release and overload) - 01 Nos (Incoming) (c) MPCB TP Current rating range 45 to 63 amps, 50 KA - 01 Nos (Outgoins) Make: L&T/Legrand/Schneider (d) Power contactor 3 phase, 415 volt 70 Amps MNX series - 03 Nos Make: L&T/Legrand/Schneider

4

100

-

... More
(e) Thermal over load relay suitable for 30 to 50 Amp current rating - 01 Nos Make: L&T/Legrand/Schneider (f) Single Phase perventer, phase reversible with under voltage, over voltage preventer relay - 01 no Make : Minilac / L&T / Legrand / Schneider (g) Timer for star-delta starter suitable for 41/45 HP motor - 01 no Make : L&T / Legrand / Schneider or equivalent make (h) Digital Panel mounted Amp meter 96 mm square type complete with selector switch complete with suitable size of CT's - 01 Set (i) Digital Panel mounted Volt meter 96 mm square type complete with selector switch- 01 (j) Insulated copper wire color code of suitable size shall be provided for internal connection of starter (k) RYB indicating lamp, LED type - 01 sets. (l) Four pole connector for connection of out door submersible copper cable, capable to carry 100 Amps (m) Cost of PCC for foundation is deemed to be included in quoted rate by the contractor. (n) Drawing shall be approved by GE before placing the order.

-

-

-

... More
Supply, laying and testing of LT UG cable of 70 sqmm 3.5 core, XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of following sizes complete all as specified and directed. Note: Earth work ( Excavation, Returning & refilling and removal), cable protection HDPE pipe, GI protection pipe shall be measured and paid for seperately under respective item of Sch 'A'.

80

100

-

... More
Material and labour for Double wall corrugated HDPE pipe, ISI marked of outer dia 77 mm and inner dia 63 mm with smooth internal and profiled external surface, non-pressure type, laid in trenches/floors/duct or fixed on walls /pole including all connections, accessories like socket, couplers, bends, etc for protection of LT cable XLPE grade 1100 volts complete all as specified and directed.

60

100

-

... More
Supply, Installed & fix maintenance free earthing copper bonded steel earth rod of 10 feet long having diameter of 17.2mm with copper bonding thickness of 250 micron with universal clamp made of SS earth enhancing compound shall be of 30kg/pit (resistivity is less than 0.12 Ohm meter).The bove arrangements shall be provided with heavy duty earth poly plastic pit cover of 4000 kg load bearing capacity complete all as specified and directed.

8

100

-

... More
M&L for cleaning away all grass, vegetation, saplings, shrubs, undergrowth, roots and trees up to 50 cm girth from the area surrounding of E/M installations yards, surrounding valve chamers / Over head tank / under ground sump and removing the rubbish upto a distance 50 mtr outside the periphery of the area under clearance and dressing the area etc complete all as specified and directed.

500

100

-

... More
Demolition of Brick work or stone/boulder masonry, build in cement mortar or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

4.42

100

-

... More
Demolition of cement concrete unreinforced of Concrete of any description and in any position not otherwise specifically provided for where directed.

0.6

100

-

... More
M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggt in foundation, filling, mass concrete complet all as specified and directed.

0.6

100

-

... More
M&L brickwork with fly ash modular bricks/AAC blocks straight or curved on plan exc 6mtr mean radius built in cement mortar 1:4 by using old size bricks complete.

4.42

100

-

... More
M&L rendering 15 mm thick in CM (1:4) on brick work or concrete surfaces mixed with water proofing compound incl chajja, facia etc, finished the surfaces even and smooth without using extra cement mixed with water proofing compound complete all as specified.( WPC measured separately)

38

100

-

... More
M&L for applying two coats of cement base paint on new plastered surfaces of wall over a coat of primer complete all as specified and as directed.

38

100

-

... More
M&L for preparation of old treated surface of walls (plastered/unplastered ) including cornices, Pilasters etc by brooming down or steel wire brushing, scraping down smoke , soot moulds , moss and efflorescent salts, trading oil and greasy spots and applying one coat of white wash, leaving premises clean and tidy all as specified and directed

1650

100

-

... More
All as per item No 25 above but one coat of white wash on ceilings complete all as specified and directed.

350

100

-

... More
All as per item No 25 above but one coat of colours wash on walls complete all as specified and directed.

650

100

-

... More
All as per item No 25 above but one coat of cement based paint on walls complete all as specified and directed.

650

100

-



Evaluation Notes How It Works ?

Related Tenders

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.