Military Engineer Services Tender
... More
The MES has issued a formal invitation for competitive bids for the Military Engineer Services project, for Repairs, Replacement And Day To Day Periodical Maintenance Of Electric Pump, Starters, And Suction Delivery Lines, Cleaning Of Oh,ug Sump At Makarpura At Afs Vadodara in Vadodara, Gujarat, with an estimated contract value of Rs. 25,00,000. The bid opening date for this tender is 03-11-2026 and the last date for bid submission is 17-11-2026. Interested bidders for Military Engineer Services tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Military Engineer Services - MES Tender - Gujarat Tender
Opening Date3 Nov 2026
Closing Soon17 Nov 2026
Tender Amount₹ 25,00,000
Costs
EMD
₹ 50,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Repairs, Replacement And Day To Day Periodical Maintenance Of Electric Pump, Starters, And Suction Delivery Lines, Cleaning Of Oh,ug Sump At Makarpura At Afs Vadodara
Contact
Tender Id
2026_MES_781917_3Tender No
8206/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Supply only Granular Calcium hypo chlorite 65% - 70% chlorine content packed in 45 Kg drum complete as directed by Engineer-in-Charge. Make:-Auafit/ ALTOC/ RAMCO/DECLIBAC/TECHNOMAC/MILTON ROY
1100
-
-
... More
S&F straight plain brass ferrules (or connecting screws) screwed both ends and fixed to 200/250mm dia water pipe by proper punching & fixing including earth work all as per site requirement with testing complete.
2
-
-
... More
Excavation in trenches not exceeding 1.5m width and not exceeding 1.5 m in depth and getting out in soft/loose soil for taking up/laying cable/pipe etc completed all as apecified and directed.
45
-
-
... More
Returning, filling including spreding, leveling watering & well ramming in layers not exceeding 25cm as directed by Engr-in-charge.
35
-
-
... More
Removal of excavated material at a distance not exc 50 mtr and dipositing where directed at a level not exc. 1.5 mtr above the starting point.
10
-
-
... More
M & L for run lead joint for CI/DI pipe 150/200/250 mm bore of spigot & socket connection complete.
Note- Excavation shall be measured and paid under respective item in this schedule.
15
-
-
... More
Repair/rectification of leakages to water supply distribution lines 15 mm dia to 25 mm dia GI tubing with provision of necessary excavation, returning and filling in as required, tightening of loose joints of union, elbow, sockets etc, threading if required including supply and replacement of GI unions/sockets/nipples as required at site complete all as specified and directed.
150
-
-
... More
All same as per item No 1.00 above but for GI tubing 40 mm dia to 50 mm dia
25
-
-
... More
Attending routine compliants of external water supply including rectification of minor defects by taking down of existing GI tubing up to 25 mm dia, cutting/threading and making joints and cleaning for any blockages, opening of float valve of service tanks, cleaning and fixing the same in its position, replacement of jumper valve/ packing sheet of gate valve and including replacement of GI unions/sockets/nipples etc as required at site complete all as specified and directed.
200
-
-
... More
All same as per item No 4.00 above but for GI tubing 40 mm dia to 50 mm dia.
40
-
-
... More
M & L for attending break down of water supply pipe line and repair to CI water mains of size 100 mm to 200 mm dia at a given notice including necessary excavation in mud, in any type of soil by manual or using special T &P such as JCB etc. De-watering from the trenches by using pump sets, rectification of leakages, fixing of CI specials such as collars bends/tail peaces etc and making joints complete all as specified and as directed. Note:- CI specials, lead Joints, D-Joints, Clamp joints etc shall be measured and paid under respective items of sch 'A'.
14
-
-
... More
S&F in repairs 15 mm bore unplasticised PVC pipes of pressure rating 10 Kg f/cm2 with all fittings and fixed to walls and ceiling or laid in floors complete.
Note:- Excavation/earth work will be measured and paid separately.
70
-
-
... More
All as per item No 15.00 above, but 20 mm bore UPVC tubing complete.
50
-
-
... More
All as per item No 15.00 above, but 25 mm bore UPVC tubing complete.
40
-
-
... More
S&F in repair semi automatic star delta starters in sheet steel enclosure AC-3 duty, 415 V, 25 HP,with ralay range 16-25 A
Make:- Make- L&T/ ENGLISH ELECTRIC/ STANDARD/ SIEMENS/ CROMPTON GREAVES
1
-
-
... More
S&F semi automatic star delta starters for 30 HP Centrifugel Motor pump, relay range 40 to 50 Amp including taking down of existing old burnt startor complete all as specified and directed. Make : Havells/L&T
2
-
-
... More
S&F semi automatic star delta starters for 25 HP Centrifugel Motor pump, over load relay range 28 to 40 Amp including taking down of existing old burnt startor complete all as specified and directed. Make : Havells/L&T
2
-
-
... More
M&L for replacement of Pump for Centrifugal water Motor of cap 30 HP as per existing make and shape fixed with old motor including required fixing arrangement and all conection at pump house complete all as specified and directed By Engr-in-charge
1
-
-
... More
Labour only for lowering of summersible pump assembly after disconnecting tanking up and repairing from existing water supply pipe line and all electric connection of 30 HP motor all as per the direction of engineer in charge.
1
-
-
... More
Supply only the following spares for repairs of submersible pump set of 30 HP capacity complete all as specified and directed.
-
-
-
... More
(a) Motor bearing bush (LB)
2
-
-
... More
(b) Thurst bearing set
2
-
-
... More
(c) Impeller
6
-
-
... More
(d) Stage casing
6
-
-
... More
(e) Section bush
2
-
-
... More
(f) Pump NRV
2
-
-
... More
(g) Discharge out let Bush LB
2
-
-
... More
(h) Discharge out let.
2
-
-
... More
(j) Middle bush LB
2
-
-
... More
(k) SS sleeves
2
-
-
... More
(l) Pump servicing
2
-
-
... More
(m) Neck ring stage casing
2
-
-
... More
(n) Sand guard
2
-
-
... More
(o) Oil sealing
2
-
-
... More
Repairs/ overhauling of centrifugal pump assembly after disconnecting existing water supply pipe line and electric connection from 30 HP motor and transporting to work shop opening the pump and replacement of unserviceable worn out parts refixing ,overhaualing,reassmbling and alignment with replacement of unserviceable parts and refixing the same back to pump house plat form including testing all as per the direction of engineer in charge. Note : New part of pump shall be measured and paid seperatly.
2
-
-
... More
Supply only following spare part of 30 HP centrifugal pump
-
-
-
... More
Supply only Pump shaft
2
-
-
... More
Supply only Oil seal
1
-
-
... More
Supply only Gasket
2
-
-
... More
Supply only Bearing
2
-
-
... More
Supply only pump coupling
2
-
-
... More
Supply only Terminal block
2
-
-
... More
Supply only Impeller
1
-
-
... More
Supply only PVC fan
2
-
-
... More
Supply only Gland rope
10
-
-
... More
Flushing of existing borewells of size 150 mm dia, 150 Mtrs depth with drilling compressor including surging and flushing the bore at a pressure of 7 Kg / Sq cm complete with compressed air and flushing the sand, mud etc from the bore well till discharge of the fresh water, including testing of water samples for chemical and bacteriological tests and yield testing for 8 hours complete all as specified and directed .
2
-
-
... More
Rewinding the centrifugal pump motor 30 HP of any make with PVC insulated super enameled heavy duty copper winding wire of same gauge and number of turns by using minilex fiber insulating sheet and sleeves etc.
3
-
-
... More
Rewinding the Summersible pump motor 35 HP of any make with PVC insulated super enameled heavy duty copper winding wire of same gauge and number of turns by using minilex fiber insulating sheet and sleeves etc.
2
-
-
... More
S&F PVC insulated, PVC sheathed, submersible flat cable ISI marked with multi stranded copper conductor 1100 volt grade of size 16 Sqmm 3 core with PVC conduit of size 25mm dia as per site requirement for connecting pump from panel including heavy duty PVC conduit as per ground requirement complete including taking out of existing cable complete all as per site requirement or as directed by Engr-in-charge.
20
-
-
... More
S&F PVC insulated, PVC sheathed, submersible flat cable ISI marked with multi stranded copper conductor 1100 volt grade of size 10 Sqmm 3 core with PVC conduit of size 25mm dia as per site requirement for connecting pump from panel including heavy duty PVC conduit as per ground requirement complete including taking out of existing cable complete all as per site requirement or as directed by Engr-in-charge.
50
-
-
... More
S&F PVC insulated, PVC sheathed, submersible flat cable ISI marked with multi stranded copper conductor 1100 volt grade of size 6 Sqmm 3 core with PVC conduit of size 25mm dia as per site requirement for connecting pump from panel including heavy duty PVC conduit as per ground requirement complete including taking out of existing cable complete all as per site requirement or as directed by Engr-in-charge.
60
-
-
... More
S&F PVC insulated, PVC sheathed, submersible flat cable ISI marked with multi stranded copper conductor 1100 volt grade of size 4 Sqmm 3 core with PVC conduit of size 25mm dia as per site requirement for connecting pump from panel including heavy duty PVC conduit as per ground requirement complete including taking out of existing cable complete all as per site requirement or as directed by Engr-in-charge.
60
-
-
... More
Reapiring / Servicing of complete of all water supply panel by cleaning of movable parts with anti rust spray, replacing of nuts & bolts,washers, with suitable lugs of burnt/rust contacts & fitting of screws & rewiring with suitable guage copper conductor/flexible wires, all as required as per ground condition, with tightening of all loose parts, with testing complete on load all as directed by Engr-in-charge. .
3
-
-
... More
M& L for painting of water supply panel with spray painting inside and outside the panel completely
3
-
-
... More
Construction of valve pit Complete as per Chief engineer Airforce Ahmedabad Drg No. CEAA/TD/57 sheet No.1.1, Ser No.4 Type 'D' of size 1050 x 750 x 1000mm for 150 to 200 mm dia Sluice / Reflex valve. Complete as speccified & directed by Engr-in-charge.
2
-
-
... More
M&L for cleaning of under mentioned RCC over head reservoir, under ground sump/semi under ground sump of any size and any height of staging by using mechanical means and scientific cleaning by carrying out the following stages of cleaning process for disinfection of surfaces:-
a) Cleaning of all external area around the tank by removal bushes/grass, leveling of surface all around 5 Mtr of water sump/OH tank.
(b) The inner surface of the walls and ceilings of the tank shall be cleaned with high pressure jet pump after dewatering in the tank.
(c) After thorough cleaning of the tank, removal of algae calcination and other dust particles with high pressure including hot water treatement @ 50 degree centigrade. (d) Vacum cleaning and sludge shall be removed by using pump and the sludge has to be disposed off at a places as directed.
-
-
-
... More
(e) After removing the sludge from tank, the floor and inner surfaces of the tank shall be cleaned by using an industrial vaccum cleaner and the tank shall be made fully dust free and disinfection with bio-degradable chemical/anti bacterial spray and surfaces to be proven non toxic.
(f) After the treatment as mentioned at (e) above, the inner surface of walls and ceiling shall be treated with UV Radiation/Ozonization with UV rays. (g) After complete treatment is carried out, all inlet, over flow, delivery, wash out pipes, ladder and doors shall be painted with two coats of synthetic enamel black paint after thorough cleaning the surfaces and also the surfaces of sluice valves shall be painted with P.O. Red paint and writing "capacity of tank, date of cleaning and due date of cleaning" on walls as specified and as directed.
(h) The wire mesh of ventilaters of the tank shall be replaced with new GI wire mesh.
-
-
-
... More
underground / semi under ground RCC reservoir of capacity 1 lakhs gallons at Main pump house
2
-
-
... More
RCC overhead reservoir of capacity 60000 gallons at 30 metre staging,
1
-
-
... More
RCC overhead reservoir of capacity 50000 gallons at 30 metre staging,
1
-
-
... More
Under ground sump of capacity 50000 Ltrs for fire safety located at palace & Tech Flight complete.
3
-
-
... More
Notes:-
(i).The unit rate quoted deemed to be including draining of water with mechanical equipment and working in water and mud etc.
(ii) The unit rate quoted deemed to be include all safety precautions which shall be taken while working on RCC over head tank /underground sump and contractor or his authorised Engineer shall be available during execution of the job.
(iii) Lighting arrangements if required to be provided by the contractor temporarily at his own arrangements and the amount quoted for that is deemed to be inclusive in the unit rate and electricity/diesel shall not be provided by the MES.
(iv) Contractor will not be allowed more than one day to do the work inside of the each OH Tank / UG Sump to prevent interruption of water supply to the users.
-
-
-
... More
Supply and lay DI Pipes K-7 with all fittings flange type laid infloors or fixed to walls and ceilings etc of sizes 100 mm as directed by EIC
100
-
-
... More
Supply and lay DI Pipes K-7 with all fittings flange type laid infloors or fixed to walls and ceilings etc of sizes 150 mm as directed by EIC
120
-
-
... More
Supply & fix SS Spindle CI sluice valve PN 1.6, long body, confirming to IS- 14846 : 2000. Complete and testing all as specified and as directed by the Engineer-in-Charge including dismantling of sluice valve of following sizes:-
-
-
-
... More
150 mm bore sluice valve
4
-
-
... More
100 mm bore sluice valve
3
-
-
... More
80 mm bore sluice valve
2
-
-
... More
Labour only for Disconnecting the existing non functional submersible pump set from electric supply from panel, dismantling existing CI bend from non return valve, removing and lifting out submersible pump set of any description and capacity upto 20/15 HP and in any position, along with existing column pipe 100mm dia and existing submersible cable of any size from the bore well (approximately 450 feet depth of pump set from GL) and staking the pump and column pipes near by the bore well for inspection complete all as specified and directed.
NOTE: - Contractor shall take proper precautions while lifting out and removing pump set from bore well so as to avoid any damage to column pipe and submersible cable. All necessary T&P and equipments required for lifting out pump set etc. shall be arranged by the contractor at his own cost.
2
-
-
... More
(ii). Number of column pipe may vary from 30 to 50, The existing pipes & flanged joints shall be checked for its serviceability & unserviceable joints along with flanges shall be removed from the column pipe by cutting the pipes & making new thread in pipes for fixing of new flange joint, the cost of same shall be deemed to be included in the quoted rate for above item. However cleaning of pipes if any required shall be measured & paid separately.
-
-
-
... More
Labour only for Lowering down of the submersible pump set of any description and any capacity upto 20/ 15 HP and in any position, in bore well along with column pipe 100 mm dia and submersible cable of any size (approximately 450 feet depth of pump set from GL) complete all as specified and directed including making necessary electric connections & testing the pump set after lowering complete all as specified and directed.
2
-
-
... More
Supply only the following items/ spare parts suitable for AC submersible pump set/Moter up to 20 /15 HP capacity dismantled under Schedule ‘A’ item No. 40.00 here in before complete all as specified and directed.
-
-
-
... More
Cast iron stage bowl
1
-
-
... More
Gun metal neck ring make NITCO’ or equivalent
2
-
-
... More
Anti magnetic stainless steel pump shaft with key made : DD/’KSB or equivalent
2
-
-
... More
Impeller gunmetal make: NITCO/ KSB or equivalent
1
-
-
... More
Stainless steel sleeve( inlet) make : DD/KSB or equivalent
2
-
-
... More
Stainless steel sleeve( outlet) make : DD or equivalent
1
-
-
... More
Running bush outlet of gun metal
1
-
-
... More
Stage bowl cover
1
-
-
... More
Bolt stud with nut and washers
1
-
-
... More
Running bush inlet of gun metal
1
-
-
... More
Strainer stainless steel
1
-
-
... More
Shaft nut with washer
1
-
-
... More
Supply only the following items/ spare parts suitable for submersible motor of AC 20 HP capacity complete all as specified and directed.
-
-
-
... More
Connector for motor
2
-
-
... More
Steel bolt set
2
-
-
... More
Key for thrust plate
2
-
-
... More
Thrust bearing[set of 02]
2
-
-
... More
Cable pressure washer
2
-
-
... More
Thrust plate
2
-
-
... More
Rewinding the submersible motor 20 HP of any make with PVC insulated super enameled heavy duty copper winding wire of same gauge and number of turns by using minilex fiber insulating sheet and sleeves etc complete all as specified and directed.
2
-
-
... More
M&L for fabrication of motor pump base and suppporting leg of various pipes etc using MS flat 25x5mm iron strip/channel/angle Iron including necessary cutting , welding, bending etc complete all as specified and directed.
400
-
-
... More
S & f for Motor 7.5 HP vertical type high pressure motor pump set of 7.5 HP electric driven 3 phase 415 volt including disconnecting and taking out existing and testing complete all as specified and directed by Engr-in-Charge
1
-
-
... More
Disconnecting and taking out defective MCCB after disconnecting all electrical connection and supplying, fixing, and testing MCCB, 4 pole, 415 Volt AC supply, 320 Amps having breaking capacity Icu = 35/36 KA with fixed thermal & magnetic setting, of Make : Havells/C & S Electric/ HPL / Standard.
1
-
-
... More
S&F chemical feed dozer motor operated suitable for mixing hypochloride of capacity 100 ltr tank with stroke adjustment of 0 to 6 LPH complete with fittings and piping all as specified and directed.
1
-
-
... More
M & L for garden light LED bollard with opal acrylic diffuser and IP 65 protection 9 watt including 1.5 sqmm copper conductor up to 3 RM for connection from existing wire including cemented work for grouting of bollard light complete all as specified directed.
Make : Bjajaj/BGBOM 650 9W LED WW or equivalent of Philips/wirpro
6
-
-
... More
Supply & fix LED colour light 9 watt for existing fountain, IP 65 protection coulour RYBPG as per required complete all as specified and directed.
Make: Havells/Bajaj/Philips
6
-
-
... More
M & L for 100 watt LED colour flood light, IP 65 proction for ilumission including fixing arrangment complete all as specified and directed.Make : Havells/wipro/philips
5
-
-
... More
M&L for foot valve of size 100 mm fixed in sump as per directed by Engr-in-charge.
4
-
-
... More
Note for all items :- If any item gets repeated in this schedule, the lowest rate quoted for those same items by the L-1 bidder shall be considered for payment and decision of Accepting Officer i.e. GE(AF) Baroda in this regard shall be final and binding.
-
-
-

