Military Engineer Services Tender

... More
The MES has issued a formal invitation for competitive bids for the Military Engineer Services project, for Special Repairs To Building Nos P 172 And Special Repair Renovation Of Toilet And Bothrooms Block At Bldg No P 80 At Mil Stn Gandhinagar in Gandhinagar, Gujarat, with an estimated contract value of Rs. 48,00,000. The bid opening date for this tender is 16-11-2026 and the last date for bid submission is 26-11-2026. Interested bidders for Military Engineer Services tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.

Military Engineer Services - MES Tender - Gujarat Tender

Opening Date16 Nov 2026
Closing Date26 Nov 2026
Tender Amount₹ 48,00,000 
Notes
Download

Costs

Description

Special Repairs To Building Nos P 172 And Special Repair Renovation Of Toilet And Bothrooms Block At Bldg No P 80 At Mil Stn Gandhinagar

Contact

Unlock the Tender details

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

Unlock the Tender details
... More
M & L brick work with old size sub-class ‘B’ bricks,(OLD SIZE BRICKS) straight or curved on plan to any radius in half brick thick wall, built in cement mortar 1:4 complete all as specified and directed.

40

-

-

... More
Taking down cement plaster on brick or stone wall etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

1100

-

-

... More
M&L rendring 10mm thick on fair faces of brick work or concrete surfaces on walls, finished even and smooth without using extra cement in CM 1:6 complete all as specified and directed by Engr-in-Charge.

500

-

-

... More
M&L for rendering cement plaster 5mm thick in cement mortar 1:3 on fair faces of concrete in ceilings, chajjas, fins facia etc. finished even and smooth without using extra cement complete all as specified and directed.

120

-

-

... More
M&L for rendering cement plaster 10mm thick in cement mortar 1:3 on fair faces of concrete in ceilings, chajjas, fins facia etc. finished even and smooth without using extra cement complete all as specified and directed.

110

-

-

... More
M&L for rendering 12mm thick in CM 1:4 on stone wall surfaces fair faces of brick work & finished even and smooth without using extra cement with water proof compound ( water proof compound paid seperatly) complete all as specified and directed.

570

-

-

... More
Material and labour for preparation of newly plastered/unplastered surfaces of ceilings & applying three coats of white wash complete all as specified.

230

-

-

... More
M&L for prepration of old surfaces of ceilling and applying two coat of white wash complete all as specified and directed.

100

-

-

... More
M&L for complete removal of existing treatment from walls (any number of layers) by scrapping with steel scrappers or any other means and preparation for next treatment complete all as specified.

300

-

-

... More
Material and labour for existing prepared surface of walls & applying two coats of cement base paint over a coat of primer complete all as specified.

300

-

-

... More
M&L for 1mm thick wall care putty on walls surface incl prepare to surface for next treatment complete all as specified and directed.

650

-

-

... More
Material and Labour for applying two coats of 100% Premium weather proof exterior paint acrylic emulsion paint (Any shade) on new/old wall surfaces latex based having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm. complete all as spcified and directed. (a) M&L for applying solvent free based primer . the primer shall be applied yielding a dft of 200 micron (b) M&L for Ist coat applying weather proof exterior paint latex based having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) coverage @ 1.00 litre/ 12-13 sqm and tensile strength will be 2.7-3.10 mpa and Specific gravity in the range of 1.15-1.35 kg/L (c) M&L for 2nd coat applying weather proof exterior paint latex based having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) coverage @ 1.00 litre/ 8-9 sqm and tensile strength will be 2.7-3.10 mpa and Specific gravity in the range of 1.15-1.35 kg/L Note :- (i) The weather proof exterior emulsion paint shall be carried out by approved manufacturer Applicator and shall have a minimum of three (3) year documented experiance in the application of exterior emulsion paint coating to existing wall surface. (ii) All material used in this system shall be manufactured by a single manufacturer's to ensure compatibility and proper bonding. (iii) All material are to be delivered to the job site in the manufacturer's original packaging and shall be executed authorised applicator. (iv) Contractor shall give performance gaurantee of 5 years from completion of contract and against warranty 1% of contract amount shall be retained for 5 year. (v) Contractor shall submit the technical data sheet of the approved make of weather proof exterior emulsion paint for Approval brfore the execution of the work. (vi) Guarantee - The contractor shall furnish a guarantee certificate from approved make in favour of garrison Engineer for the efficiency of the weather proof exterior paint for 5 years during the guarantee period.

370

-

-

... More
M&L for distempering with 1st quality acrylic distemperof required shade and colour complete, two coats on existing prepared walls surface complete all as specified and directed.

650

-

-

... More
M&L preparation of old painted surfaces of wood and wood based material of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

20

-

-

... More
M&L preparation of old painted steel and iron surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint all as specified.

10

-

-

... More
Dismantling floor hearth or wall tiling including cement mortar and plaster, bedding but not backing removing serviceable tiles to store and rubbish of the premises complete all as specified and directed.

425

-

-

... More
M&L for polished /matt finished colour Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in dado , skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 10mm thick rendering in cement & sand mortar 1:4 complete all as specified and as directed.

15

-

-

... More
M&L for Glazed ceramic coloured tiles 7-8 mm thick in vertical surface exceeding 0.12 sqm but not exceeding 0.18 sqm set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of the tiles and over 10 mm thick rendring in cm 1:4 complete all as specified& directed by Engr-in-Charge.

410

-

-

... More
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. and Laid bedded and pointed in any mortar complete all as specified and directed

0.93

-

-

... More
M&L for 16 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over screed bed 15mm thick 1:6 cement mortar complete all as specified& directed by Engr-in-Charge.

9.32

-

-

... More
M&L for rounding to edges of stone/granite slabs one edge such as in steps cooking platform , window cill and other situations complete all as specified & directed

19

-

-

... More
Demolition of cement concrete (un-reinforced) in ground floor and paving not exc 15 cm thickness (below or above ground level.) & removing unserviceable materials in low laying area, complete, all as directed by Engr-in-Charge.

18.03

-

-

... More
M&L for 25 thick cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in levelling coarse for tiles complete all as specified and directed.

165.5

-

-

... More
Material and labour coloured non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.08 sqm but not exceeding 0.18 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed.

135

-

-

... More
Material and labour for polished /matt finished colour ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed.

180

-

-

... More
M&L for machine cut kota stone slab flooring 18-20mm thick in steps, jambs, pillars, window- cills, cooking platforms, floors and like in cement mortar (1:4) including pointing in grey cement (1:2) using marble dust with admixture of pigment to match with shade of kota stone including rubbing and polishing complete all as specified& directed by Engr-in-Charge.

16

-

-

... More
M&L for 100 mm thick PCC 1:4:8 type D -2 using 40 mm graded stone aggregate as in sub base complete all as specified& directed by Engr-in-Charge.

100

-

-

... More
M&L for 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand compelete all as specified and directed

100

-

-

... More
M&L for 75 mm thick PCC 1:3:6 type B1 using 20 mm graded stone aggregate as in plinth protection surface finished fair and even complete all as specified and directed.

80

-

-

... More
Dismantling of cement concrete (un-reinforced) kerb stone and the like of any description of and in any position not otherwise specially provided for complete all as specified and directed.

1.45

-

-

... More
M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

1.45

-

-

... More
Taking down chowkhats (without taking off shutters from the frames) chowkatts n exc 1.5 sqm each complete all as specified & directed by Engr-in-Charge.

60

-

-

... More
Taking down chowkatts (without taking off shutters from the frames) chowkatts exc 1.5 sq. m but n exc 4 sq m each complete all as specified & directed by Engr-in-Charge.

8

-

-

... More
Taking down shutter of any decription exc.1Sqm and n.Exc 2 Sqm complete all as specified & directed by Engr-in-Charge.

16

-

-

... More
S&F Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for three/two tracks shutters, frames,grills, doors, windows, ventilators and partitions (Fixed portions), slinding windows,ventilators including providing and fixing hinges/ pivots/rollers and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Charge.

342

-

-

... More
Supply only 4 mm thick glass sheet any shade tint glass, ordinary quality and glazing with rubber bedding in square & any size in each pane complete all as specified & directed by Engr-in-Charge.

13.6

-

-

... More
Supply only 3mm thick glass sheet froasted glass, ordinary quality and glazing with rubber bedding in square n exc 0.5 sq.m in each pane complete all as specified & directed by Engr-in-Charge.

7

-

-

... More
S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

18.6

-

-

... More
S&F in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

3

-

-

... More
M&L for Framed work as in doors or gates of angle , hold fast or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete & making good the floors/walls in PCC 1:2:4 type B-0 to match the existing floors/walls.

30

-

-

... More
S&F factory made 35 mm thick plain framed, paneled shutter (Two panels) with lock rail and panel of 9mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces, size of rail and styles as per IS : 1003 (Part-I), kiln seasoned and chemically pressure treated using second class Hard Wood rail and styles, fixed to chowkat, complete all as specified and directed.

18

-

-

... More
S&F factory made 35mm thick glazed and skeleton shutters made of second class hard wood, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in clause 8.24 of Section 8 in SSR Part-I, kiln seasoned and chemically pressure treated, fixed to chowkat, complete all as specified and directed.

18

-

-

... More
M&L for preparation of new surfaces of wood or wood based materials of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of pink primer complete all as specified.

75.6

-

-

... More
M&L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

118

-

-

... More
S&F Factory Made Solid PVC Moulded Door Shutter with particle board , 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm thick plain colour PVC Sheet on back face supplying & fixing in frame at site as per specification & drawing

33.07

-

-

... More
Supply and fixing stainless steel hinges 100mm long medium weight to pressed steel/angle iron frames by welding/screws all as specified.

138

-

-

... More
S&F aluminium anodised barrel tower bolt 150mm size extruded section, ISI marked & fixed complete all as specified and directed.

92

-

-

... More
S&F extruded aluminium alloy handles 150mm size fabricated type anodised. ISI marked complete all as specified and directed.

92

-

-

... More
S&F 250 mm long mild steel sliding door bolts clip type, stove enameled black, with bright bolt not less than 12mm dia and including a minimum of 06 bolts and nuts, four on bolt plate and two on staple plate and fixed, ISI marked complete all as specified.

8

-

-

... More
S&F in repair 18mm thick PVC hollow board both side prelaminated of approved texture as in kitchen cabinet/cupboard ( with shelves and partions) including frame , beading and necessary fittings & fixture like auto closing concealed hinges, 150mm long fancy SS handle, magnet catch etc as per manufacturers instructions.

10

-

-

... More
S&F in repair stainless steel curtain rod of 25 mm dia (in lengths as directed) heavy duty with decorative ball type side brackets supporting hook etc , both ends and pair with PVC rawl plug & steel screws on walls/beam complete all as specified and directed.

20

-

-

... More
S&F 140mm overall length floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor complete all as specified and directed.

5

-

-

... More
Taking up or down 15mm steel tubing and connections, complete all as specified& directed by Engr-in-Charge.

140

-

-

... More
S&F steel tubing medium grade 15mm bore with all fittings fixed complete to wall and or laid in floor complete all as specified & directed by Engr-in-Charge.

10

-

-

... More
Supplying and laying of 20mm outer dia CPVC pipes SDR 13.5 & Plain CPVC SDR 11 fittings in trenches complete all as specified.

130

-

-

... More
S&F for CPVC PIPE OUTER DIA 20MM Brass Elbow (3/4 X ½) complete all as specified and directed

80

-

-

... More
Taking up or down 20mm steel tubing and connections, complete all as specified & directed by Engr-in-Charge.

30

-

-

... More
S&F 20mm GI tubing Medium grade fix to wall/floor complete all as specified & directed by Engr-in-Charge.

30

-

-

... More
Taking up or down 25mm steel tubing and connections, complete all as specified & directed by Engr-in-Charge.

100

-

-

... More
S&F 25mm GI tubing Medium grade fix to wall/floor complete all as specified & directed by Engr-in-Charge.

100

-

-

... More
M& L for Cutting chases, pinning in, for brick walls, making good to facings for concealed water tubing etc. cutting exceeding 10cm but not exceeding 20cm girth complete all as specified and directed.

130

-

-

... More
Supply and fixing 500 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I

2

-

-

... More
Supply and fixing in repair 500 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I

3

-

-

... More
Supply and fixing 1000 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I

4

-

-

... More
S&F ball valves brass high pressure with polythelene float and fly net complete, screwed , iron pipes 20 mm dia complete all as specified & directed by Engr-in-Charge

9

-

-

... More
S&F in repair for 20mm Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

8

-

-

... More
S&F in repair for 25mm Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

8

-

-

... More
Dismantling of cast iron, PVC or reinforced concrete drain pipes jointed in cement mortar upto 110mm and 75mm bore of pipe from wall/floors etc complete all as specified and directed.

176

-

-

... More
S&F, 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including stack 'Z' clamp complete all as specified and directed.

6

-

-

... More
S&F, 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including 'Z' clamp complete all as specified and directed.

70

-

-

... More
S&F 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

10

-

-

... More
S&F 110 mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

90

-

-

... More
S&F, 75mm bore PVC (SWR) bend, any radius complete all as specified and directed.

2

-

-

... More
S&F, 75mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

2

-

-

... More
S&F, 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

28

-

-

... More
S&F, 110mm bore PVC (SWR) bend, any radius complete all as specified and directed.

16

-

-

... More
S&F, 110mm bore PVC vent cowl complete all as specified and directed.

15

-

-

... More
M&L, in repair, PVC (SWR) Gully trap 125/100mm ssetting and jointing with cement mortar (1:1) complete all as specified and directed.

11

-

-

... More
S&F, in repair, PVC (SWR) floor trap, with SS grating including jointing with solvent cement, dia of outlet 75mm complete all as specified and directed.

26

-

-

... More
S&F, in repair, 40mm bore, low density polyethelene pipe (LDPE) of pressure rating 6kgf/sq.cm fixed to walls, ceilings or in floors etc. complete all as specified and directed.

36

-

-

... More
S&F in repair 15mm bore dia pipe fancy type bib taps, chromium plated alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule and fixed omplete all as specified & directed by Engr-in-Charge.

21

-

-

... More
S&F in repair 15mm bore dia pipe fancy type long body bib taps, chromium plated alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule and fixed omplete all as specified & directed by Engr-in-Charge.

16

-

-

... More
S&F in repair 15mm bore dia pipe angle valves/stop valve ,fancy type, chromium plated alloy screwed down high presure, screwed both ends for iron pipe or for unions of 15 mm dia complete all as specified & directed by Engr-in-Charge.

80

-

-

... More
S&F in repair vitreous China squatting pan 'Orissa pattern' size 580x440 mm, white with integral foot rest including 'P' or 'S' trap front or back inlet excluding flushing cistern and flush pipe including connection to trap and flushing pipe etc and making good to floor complete all as specified and directed.

20

-

-

... More
Demolition of old existing unserviceable EWC seat and S&F vitreous china wash down water closet pan (Padestal pattern), white (ISI marked), including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonoage pipe etc & with plastic WC seat cover (white) closed pattern with flat bottom and cover and suitable mild steel chromium plated or aluminised hinging device complete all as specified.

3

-

-

... More
S&F in repair PVC valveless, syphonic action type, flushing cistern of 10 ltrs capacity low level, white, with intel, ball valve, float and handle including brackets complete all as specified & directed by Engr-in-Charge.

23

-

-

... More
S&F in repair PVC connection of 15mm bore with 2 Nos. PTMT nuts, 60cm long fixed with one end to pillar tap & the other end to stop cock or iron pipe all as directed by Engineer-in-charge.

80

-

-

... More
S&F in repair 15mm bore dia pipe fancy type swan neck Pillar tap cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts, screwed for iron pipes of 15mm bore all as specified

17

-

-

... More
S&F in repair looking mirror 5 mm thick selected quality of any size including necessary moulding , stainless steel cup and washer etc complete all as specified.

5.5

-

-

... More
S&F in repair tubular towel rail, stainless steel, 20mm dia, ‘D’ type, 60cm long between flanges fixed to wall complete all as specified and directed.

17

-

-

... More
S&F in repair for PVC corner shelves set of 3 and size ( 7 inch , 9 inch, 11 inch ) complete all as specified and directed.

5

-

-

... More
S & F in repair Soap dish, size 120 x 85mm stainless steel, standard size Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

17

-

-

... More
S& F in repairs Vitreous China Urinal heavy wit high quality ceramic round/Male /Men urinal pot of size width 38cm , height 62cm and depth 31cm including PVC waste pipe 32 mm bore and CP waste coupling and including steel fastner fixed to wall complete all as specified and directed.

6

-

-

... More
S&F in repair wall mixer chromium plated (2 in -1) with arrangement for overhead shower with 220 mm max long bend pipe including 125mm x125mm over head shower complete all as specified & directed.

5

-

-

... More
S&F in repairs vitreous china counter top/down basin size 450 x 525 x 195 mm shape oval including 32 mm CP waste coupling & PVC flexible waste pipe of 90 cm long complete all as specified & directed.

17

-

-

... More
M&L for water proofing of sunken portion consisting under mentioned items :- (i) 15 mm thick plastering in C:M 1:3 with liquid WPC at all around and base of sunken floor with proper slope. (ii) Applying a coat of bitminous primer @ 0.30 litre/sqm and conforming to IS-3384, laying APP based polyster modified membrane reinforced non wooven polyster of 3.50 Kg/Sqm (minimum), sealed by torching including demolition and removal of old concrete and provn of new lean cement concrete 1:5:10 type E 2 using 40 mm graded stone aggregate specified complete all as specified and directed.

14

-

-

... More
Dismantling/Demolition/Chipping carefully loose for roof projection / chajjas portions of reinforced cement concrete to a depth or thickness varying from 10 mm to 150mm (reinforcement cut as required to facilitate demolition) work by means of sharp chisel, low impact hamer without damaging existing strong concrete upto the suitabale depth of unsound concrete in beams, roofs, chajjas, columns, staircase, landing, parapets, soffits of slabs and similar suspended work etc incl disposal of broken material/malba to the distance of 50m complete all as specified and directed. Notes :- (i) Work to be carried out in patches. (ii) The rates for scaffolding system to be used upto 15 mtr workable height shall be deemed including in the above rates and no extra shall be paid over & above the quoted rates.

2.94

-

-

... More
Dismantling timber scantlings unframed 40 sq. cm and over in section, in any position complete all as specified and directed.

0.63

-

-

... More
M&L Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S 1161-1979 grade St.-240 Complete all as specified

888

-

-

... More
M&L for Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc. complete using Fe- 290 (Gde E-165) quality 'A' compleete all as directed by Engr-in-charge.

700

-

-

... More
M&L for Stairs (framed) including stringers , treads, landing , balusters, hand rails etc water staging including cleats brackets, etc complete with gusset plate , rails braces etc. complete using Fe- 290 (Gde E-165) quality 'A' compleete all as directed by Engr-in-charge.

100

-

-

... More
Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed

150

-

-

... More
M&L painting to new or previously untreated steel surfaces of any description over 10cm in width or girth with two coats of synthetic enamel paint over a coat of zinc chromic primer including preparation of surfaces complete all as specified and directed.

150

-

-

... More
M&L for PCC Type C2 1:3:6 (40 mm graded aggregate) cement concrete in foundations, filling and mass-concrete complete all as specified & directed by Engr-in-Charge.

0.6

-

-

... More
S&F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

33.4

-

-

... More
Dismantling of asbestos cement (corrugated, semicorrugated,ridge etc.) sheets in roof coverings complete all as specified and directed.

50

-

-

... More
M&L Pre- painted galvatume aluminum zinc coating GI based Semi-corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

50

-

-

... More
Demolition Mud in roofs, any thicknes, including plastering , existing tretement and cleaning (whether full thickness removed or only or part there of) etc in all respect and preparing it for further treatment and taking out and disposal of debris & rubbish to a distance exc 1 Km but not exc 1.5 Km complete all as specified & directed by Engr-in-Charge.

6

-

-

... More
M&L for providing cement concrete in type B0 1:2:4 (using 12.5 mm graded crushed stone aggregate) as in roof padding, laid to (consolidated thickness 65mm or less) as leveling course, laid and compacted in min slope 1:30 over roof complete all as specified& directed by Engr-in-Charge.

6

-

-

... More
M&L screed laid 15mm thick in CM 1:4 as in roof over green concrete surface finished even and smooth using Lequid WPC complete all as specified. Note :-Lequid WPC will be measured and paid seperately)

150

-

-

... More
Supply only integral liquid water proofing compound (ISI marked) complete all as specified and directed.

5.57

-

-

... More
M&L for roof treatment using APP based polymeric membrane minimum weighing not less than 3kg/sqm black finish reinforced with non woven polyster matt with thermo finish (wt. not less than 150 gms/sqm) laid over compatible bitumen primer @0 .30 liters per sqm and bitumen 85/25 @ 1.20 Kg per Sqm with help of torching with a proplyne or a butane gas using torch with minimum overlap of 75mm at side and 100mm at ends and sealing including applying a coat of bitumen primer & bitumen 85/25 applied hot all as per manufacturer instructuions. For parapet in a groove (No separate payment will be made and measurement will be done for horizontal surfaces) including applying a coat of heat repallant bitumen aluminium paint @ 0 .1 liter per Sqm on topof treated surface of roof complete all as specified and directed.

150

-

-

... More
Taking down carefully copper/aluminum point wiring (light, fan,socket or power) complete,including fixture and fitting such as as switches, ceiling roses, pendants, regulators, sockets,etc excluing light fittings etc,removing materials to store for keeping in safe custudy or for taking credit ( credit for above items should be made as per conditions separately) and making good disturbed surface of walls, ceiling, floor etc to match with the existing surface.

196

-

-

... More
M&L for wiring with and including multistranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLSH cable 1100 Volts grade, ISI marked with valied CML number drawn in PVC Conduit concealed wiring and including medium grade PVC Conduit 25mm in size, fire resistant, ISI marked including with its fittings and fixtures such as tees, bends, elbows, junction boxes, etc. including multistranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLSH cable 1100 Volts grade, ISI marked with valied CML number as continuity earth wire and including modular sunken box/ Galvanized box with 4,6,8,12 & 16 nos modular plate for fixing for modular switches, sockets and fan regulators etc. complete all as specified and directed for the following :-Make : Seewel,finolex,poly cab

-

-

-

... More
(a) One light/fan/Exhaust fan point controlled by one switch

141

-

-

... More
(b) One light point controlled by two way switch

1

-

-

... More
(c) One bell buzzer point controlled by one push button independent.

6

-

-

... More
All as per item no 117 above but with 2.5 sqmm for one multi purpose socket 5 Amps 3 Pin, Independent board.

18

-

-

... More
All as per item no 117 above but with 2.5 sqmm One multi purpose socket 5 Amps 3 pin socket, on the same board.

6

-

-

... More
All as per item no 117 above but with 2.5 sqmm for one multi purpose socket 5 Amps 3 Pin, Independent board.

6

-

-

... More
M&L for wiring with and including multi stranded copper conductor 4 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed, FRLSH cable, 1100 volts grade, ISI marked with valid CML number, drawing through in and including medium grade, rigid non metallic, PVC concealed conduit of 20mm bore and including cutting chases for conduits and sunken for boxes, its accessories & including with multi stranded copper conductor 4 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed, FRLSH cable, green colour, 1100 volts grade, ISI marked with valid CML number as continuity earth wire terminating with provision of sunken concealed terminal boxes complete all as specified and directed.

18

-

-

... More
S & F Switch Modular flush button single pole one way 6 amps 1 module with suitable plate and cover complete all as specified and directed.

170

-

-

... More
S & F Socket outlet flush modular type 3 pin 6 Amps with suitable plate and cover complete all as specified and directed.

30

-

-

... More
Supply and fixing modular 16 Amps socket 2/3 pincomplete all as specified and as directed by Engr-in-Charge.

18

-

-

... More
S & F Switch Modular flush button single pole one way 16 amps with suitable plate and cover complete all as specified and directed.

18

-

-

... More
S&F in switch modular piano, flush button single pole, two way 5 Amps complete all as specified and directed.

4

-

-

... More
S&F in modular bell push,flush type, 5 amps complete all as specified and directed.

4

-

-

... More
S&F in modular Ceiling rose, PVC/poly carbonate,isolated body three terminals,complete all as specified and directed

123

-

-

... More
M&L for bell electric, Dingdong type A.C. 230 Volts, single pole complete all as specified and Directed

4

-

-

... More
M & L for modular ceiling fan regulators, Electronic step type type, AC, 230 Volts complete all as specified and directed.

12

-

-

... More
S&F in repair lamp holder, insulated body with back plate for batten fittings complete all as specified and directed.

9

-

-

... More
S&F lamp holder, insulated body with back plate for batten fittings complete all as specified and directed.

14

-

-

... More
S &F Distribution Board SPN 8 way, 240 volts, factory made powder coated, double door with neutral and earth link, suitable for fixing MCB,s complete including connecting all as specified and directed. Make :- Indoasian(Shynora) Havells/Legrand

7

-

-

... More
S & F in MCB’s single pole, 6 to 32 Amps 240 volts with ‘C’ curve,10KA , fixed in sheet metal board complete including connecting.

42

-

-

... More
S & F in MCB’s SPN 63 Amps 240 volts with ‘C’ curve, fixed in sheet metal board complete including connecting.

7

-

-

... More
S&F, in repairs, LED light fitting, 1x20W, 220 V AC decorative batten type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed

64

-

-

... More
S&F in repair LED light decorative ultra slim round profile LED lighting with extured polycarbonate enviromental friendly energy effecient ready to use pack 2 feet, 9 watt watt 220 V AC including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

15

-

-

... More
Supply and fix LED light fitting 1 x 10 W bulk head luminaries including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size

8

-

-

... More
M & L in replacement sub-main wiring with 3 single core 6 Sqmm PVC insulated, unsheathed, 1100Volts grade, copper multi stranded conductor drawn in PVC conduit 25 MM ISI marked including with its fittings and fixtures such as tees, bends, elbows, junction boxes, etc. including multistranded copper conductor 6.0 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLSH cable 1100 Volts grade, ISI marked with valied CML number as continuity earth wire drawn through and connected to main switch/ DB and testing on completion. Note: (i). 2 run of main conductor and one run of earth conductor shall be measured as one length.

420

-

-

... More
Taking down existing cealing Fan and keeping in safe custudy and re- installation the same after completion of work completed all as per specified and directed. Cost of renstallation of Electric meter included in quoted rate. Any cost of reinstallation of cealing fan not to be given.

12

-

-

... More
Taking down existing Geyser and keeping in safe custudy and re- installation the same after completion of work completed all as per specified and directed. Cost of renstallation of Geyser,connecting pipe,servicing included in quoted rate. Any cost of reinstallation of geyser not to be given.

12

-

-

... More
Taking down existing exhaust Fasn and keeping in safe custudy and re- installation the same after completion of work completed all as per specified and directed.Cost of renstallation of geysers included in quoted rate. Any cost of reinstallation of geyser not to be given.

12

-

-

... More
M & L for servicing of Exhaust Fan 225 mm to 450 mm sweep of any make/model, including removal of existing windings carefully from the slots,cleaning the slots thoroughly with necessary cleaning agent, applying slot insulation of existing and connecting the coils suitable to operate on 230 volts single-phase AC supply permanent capacitor type, tying the windings and applying air dry insulating varnish and drying the windings including replacing the movable components complete including testing complete all as specified and directed for :- Note :-3.Proper Greasing oiling and complete servicing of Exhaust Fan included in quoted rate

9

-

-

... More
M & L for earthing complete with galvanized steel earth plate electrode 60 x 60cm x 6 mm thick burried directly in ground vertically to a depth not less than 2.25 mtr deep below GL with top edge of the plate not less than 1.5 mtr below normal GL and connected to earth plate surrounded by 15 cm thick packed layers of charcoal dust and common salt and connected to earth lead galvanised iron 4mm dia wire by means of bolts, nuts, check nuts and washers of galvd iron or steel and thimbles and other end of the earth wire connected to DB and protected by galvd iron or steel pipe light grade 15 mm bore and water pipe 20mm bore GI light grade with funnel and wire mesh, including all necessary excavation and earth work PCC chamber in cement concrete 1:3:6 type C-2 and RCC cover and all as shown in electrical plate No 3 of MES schedule Pt I of 2009. Note : RCC pit cover shall be pre-cast of RCC (1:2:4) type B-I , 80mm thick reinforced with XPM weighting not less than 4 KG/sqmm in lieu of CI cover.

1

-

-

... More
Supply & Fix LED 30 Watt (5700K) Bldg Security light fitting, and including with GI light grade Pipe 32 mm dia bracket with connected with 3 core flexible copper wire 0.50 Sq mm from ceiling rose after fixing fitting in position at site all as specified and directed.

4

-

-

... More
M&L for fixing Exhaust Fan lovers and shutters round,square capacity 225 mm to 450 mm with aluminium sheet complete all as specified and directed

8

-

-

... More
M&L for fixing Exhaust Fan impeller blades capacity 225 mm to 300 mm complete all as specified and directed

6

-

-

... More
M&L for fixing Exhaust Fan bush capacity 225 mm to 450 mm complete all as specified and directed

9

-

-

... More
M&L for fixing Exhaust Fan rotor shaft capacity 225 mm to 450 mm complete all as specified and directed

9

-

-

... More
M&L for removing old U/s motor and fixing motor capacity of 225 mm to 450 mm complete all as specified and directed

5

-

-

... More
M&L for fixing Exhaust Fan stator capacity 225 mm to 450 mm complete all as specified and directed

9

-

-

... More
M&L for fixing Exhaust Fan frame body capacity 225 mm to 450 mm complete all as specified and directed

7

-

-

... More
M&L for fixing Exhaust Fan front mesh guard capacity 225 mm to 450 mm complete all as specified and directed

6

-

-

... More
M&L for fixing of capacitor and removing old U/s capacitor complete all as specified and directed

8

-

-

... More
M&L for fixing of bearing capacity of 225mm to 450 mm complete all as specified and directed

4

-

-

... More
M&L for sundry item of wear for maintenance of exhaust fan like nut bolts,washers,sleeves,cutting,mounting bolts etc as per site requirement complete all as specified and directed

9

-

-

... More
Servicing of storage type electric water heater (geyser) of capacity 25 to 50 litres comprising of the following tasks at different locations including taking down, transportation to work shop ,opening the geyser, replacement of defective spares and reinstalling the same including testing as directed by Engineer-in-charge. (a) Inspection of geysers includes taking down, transporting to works shop for repair, (dismantling) opening descaling, brushing cleaning of storage tank (b) Check and correct earth continuity of electrical items (c) Inspect of neon lamp / indicator lamp if defective. (d) Inspect over flow/vent pipes and remove blockage/ obstructions if any. (e) Examine water tightness tank after cleaning and necessary measures to make the same water tight if not. (f) Check thermostat for its proper functioning (g) Visual examination of fusible plug to ensure its intactness. (h) Checking of dead weight type high pressure release valve ( PRV ) by removing dead weight protection cleaning the seat and ensuring that the vent hole is not blocked / chocked j) Descalling of the immersion type heating element and cleaning with diluted hydrochloric acid and refixing. k) Checking and adjustments of pressure reducing valves, carrying out operation of all stop cocks & ensure free movement of all working parts. l) Replacement of the rubber / PVC gasket to ensure water tightness m) Testing of Geysers after repairs

6

-

-

... More
M&L for fixing of Heating Element 2000 watt Make : Bajaj, Racold, Havells, Jaguar,orient or any other make. complete all as specified and directed.

6

-

-

... More
M&L for fixing of Indicator red and Green Make : Bajaj, Racold, Havells, Jaguar,orient or any other make. complete all as specified and directed.

12

-

-

... More
M&L for fixing of Thermostate Make : Bajaj, Racold, Havells, Jaguar,orient or any other make. complete all as specified and directed.

6

-

-

... More
M&L for fixing of hot & cold PVC connection 300 t0 600 mm long complete all as specified and directed.

6

-

-



Evaluation Notes How It Works ?

Related Tenders

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.