Mandal Bechraji Special Investment Region Tender
... More
Search for the latest Gujarat tenders online related to civil works, road & transport, pipelines and more easily here on BidAssist. Here you can get any and every tender that is posted on the eProcurement Gujarat website, minus the clutter. No need for a tender ID, as on BidAssist, you can view any Gujarat tender by merely typing Gujarat in the search box.
Mandal Bechraji Special Investment Region Tender
Civil And Construction
Water Storage And Supply
Nprocure
Opening Date1 May 2023
Closing Date15 May 2023
Tender AmountRefer Documents
Costs
EMD
₹ 1,34,000Document Cost
₹ 11,800Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
589792Tender No
2023-24/RFPTender Authority
Mandal Bechraji Special Investment Region ViewPurchaser Address
-Website
http://home.nprocure.com
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
a) From 0.0 to 1.5 m.
125
-
-
... More
b) From 1.5 to 3.0 m.
81
-
-
... More
c) From 3 to 5.0 m
15
-
-
... More
Filling with available excavated earth (excluding rock) in trenches, plinth, sides of foundation in layers not exceeding 20 cm in depth consolidating each deposited layer by ramming and watering.
83
-
-
... More
Providing and casting in situ C.C. in grade M-15 (approx. corresp. to prop. 1:2:4) (proportions as per mix design or as per Table 9 of IS456 2000 in masses by weigh batching ) using granite, quartzite trap metal of size 6mm to 20 mm for RCC work, including scaffolding centering, form work, needle vibrated consolidation, curing comp. up to 6 meter depth or height(excluding cost of reinforcement and neat finishing) with centering and shuttering/deshuttering etc. comp. for structure for other than water retaining. (With formwork)
16
-
-
... More
Providing and cast in situ C.C. in grade M-30 proportions of ingredients as per mix design by weigh batching using granite, quartzite trap metal of size 12 mm to 20 mm and or 6 mm to 12 mm including scaffolding formwork, needle vibrated consolidation, curing andcentering hydrulic testing etc. complete (excluding cost of reinforcement) upto 6 meter height / depth Av.G.L. for all water retaining structures.
-
-
-
... More
a) R.C.C. slab and footings
22
-
-
... More
b) R.C.C. walls and baffle wall
33
-
-
... More
c) R.C.C Beams
1
-
-
... More
d) R.C.C. Top slab
3
-
-
... More
Supplying cutting, bending, binding and placing in position steel as per plan and design and as per ISS 2502 including cost of steel and binding wire for reservoirs/structures only including lift up to 6 meter height or depth below G.L. for all diameters Do - deformed (TMT) bars confirming to relevant IS Fe - 500 grade for all diameters.
7.11
-
-
... More
Grouting with 1:3 cement mortar for anchor bolt pockets machinebases, pipe sleeves, pocket holes etc. including roughening andcleaning of concrete surfaces curing etc. complete.
2
-
-
... More
Providing & fixing F.R.C. MH seat cover incl. carting to the work site etc. comp. Directed. F.R.C. Extra Heavy Duty (EHD-35) Manhole Covers & Frames Cover: 728mm ø & 100 mm thick circular cover, 35.00MT load design,100 x 2mm MS flat all round,16mm ø plain round bar for lifting the cover & should be fitted with plastic cups. Frame:560mm ø clear opening, -888 x888 x 175mm. On the upper periphery off rame 25x3 mm wide MS flat should be well embed in concrete to protect the edges off rame. FRC E.H.D.-35 manhole cover & frame described as above.
1
-
-
... More
Purchasing, supplying, Lowering, Laying & fixing various size of M.S. section such as joints, channels, angles, plates, iron rails etc. complete including fabrication at site of works, with Railway freight, loading, unloding, carting etc. comlete. Angles & Channels above 10 mm thickness
2.4
-
-
... More
Providing and fixing water tight construction or expansion joints 150 mm. dia. Wide thin ribbed PVC.
81
-
-
... More
Brick masonry in cement mortar (1:5) using common burnt clay building bricks having crushing strength not less than 35kg/cm2 including scaffolding,curing, etc. complete for walls, parapets,etc. at all levels.
5
-
-
... More
Providing and applying with two coats 20 mm thick inside cementplaster with OPC and water proofing agent on inside of inletchamber & sump consisting of 12 mm thick backing coat of C.M. 1:3 (1 cement : 3 sand) and 8 mm thick finishing coat of C. M.1:1 (1 cement: 1 sand) etc. complete including necessary curing,scaffolding required if any etc. complete
125
-
-
... More
Providing and applying 20 mm thick sand faced cement plaster at outside RCC / brick on work upto height 10 mtr. above groundlevel consisting of 12 mm thick backing coat of C. M. 1:3 (1cement : 3 sand) and 8 mm thick finishing coat of C. M. 1:1 (1cement : 1 sand) etc. complete
51
-
-
... More
Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture of undercoated wall surface to give aneven shade including thoroughly brushing the surface free frommortar dropings and other foreign matter and sand paperedsmooth
51
-
-
... More
Providing and laying 50 mm thick cement concrete flooring in 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mmnominal size) including water proofing compound finishing with a floating of neat cement etc. complete laid in one layer finished including necessary curing with OPC.
32
-
-
... More
Providing and laying 50 mm thick heavy duty cement concrete flooring in 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) with ironite powder including finishing with a floating of neat cement etc. complete. 50 mm thick
17
-
-
... More
Providing and fixing 50 cm wide M.S. Ladder fabricated fromM.S. Flats 10 mm x 75 mm with 20 mm dia steel bar steps indouble rows, @ 30 em C/C. The include stays of 10 mm x 50mm flats fixed at 3 meter C/C wtih welding anchoring and 3oats anticorrosive paint. (M.S. ladder (without safty cage)
7
-
-
... More
Providing and fixing plastic moulded reinforced steps with 10 mm TOR steel bar with plastic polyproclene (P.P.) material (vergin) etc. complete
9
-
-
... More
Supplying & fixing insert plate of size 150 x 150 x 6 mm in wall alongwith ISA 100 x 100 x 8 mm angle in position for support of vertical delivery pipe, as per drawing including handling and transporting etc. complete.
35
-
-
... More
MECHANICAL WORK
-
-
-
... More
Submersible NONOCLOG PUMP SET Supply, Installation, Testing and Commissioning (SITC) of Submersible NC PumpMotor set suitable for sewage application with semi-open or enclosed or suitable type Impeller & wear Rings in CF8M with CI FG 260 Casing & casing cover, SS 410 shaft & with motor suitable for 3-Phase, 415 V, 50 Hz., AC induction Airfilled dry type submersible motor of mini. rating as specified having max. 1500RPM sync. speed, insulation Class ''F'' With temp. rise limited to class B and IP-68protection.The scope shall include all required accessories viz. automatic coupling device, SS304 heavy duty & of suitable size double guide pipes of length to suit the sump height with required supports, SS-304 or suitable stainless steel grade Chain with shackles (shall be with dual hook / shackles of 150 mm or suitable higher size atapp. every 1.5m C-C distance) & of length as per sump height + min. 3m,Submersible Power & control cable (copper flexible & stranded type conductor of reqd. cores & size for each pump motor set) & length of sump height + min. 5 mlong each run with necessary electrical termination connection at junction box /starter panel and RCC foundation blocks for auto coupling & delivery bend, PMU etc. complete as per IS, Specification and also including in scope any other parts /accessories / fittings required to complete the work in all respects & satisfactory operation of pump set.Pump Capacity: 1200 m3/hr,Head: 10 m, Motor Rating: min. 55 kW (or higher rating as reco. by pump mfg.)Over all Efficiency at Duty- min. 75 %
2
-
-
... More
Valves:-
-
-
-
... More
Supply, Installation, Testing and Commissioning of CI D/F Manually Gear operated Sluice Valve as per IS 14846, PN 1.0 with following sizes with SS 304 seat rings, SS non-rising spindle with all hot dipped galvanised hardwares, bolts, nuts & washers, gaskets including all taxes, insurance, transportation, freight charges, Inspection Charges, loading unloading, conveyence to pump house, stacking, security etc. complete as per IS and Specification. Size: 450 mm NB (at each delivery of Pump, at header after Flow meter)
3
-
-
... More
Supply, installation, testing and commissioning of double flanged CI Dual Plate Check Valve (NRV) conforming to API 594 Class 125/PN1.0 with CS-WCB dual door, hinge pin & stop pin of SS 410, springs of AISI 304 and seat rings of SS 304 (renewable), along with all required accessories, gaskets and hardwares,etc. and complete as per IS and Specification. Size : 450 mm NB (on delivery of each Pump)
2
-
-
... More
Supply, installation, testing and commissioning of Flange ends Expansion Bellow(PN 1.0) as per EJMA standards and as per specs. and complete in all respect.Size: 450 mm x 300 mm (L) (at Delivery of each pumps, at header near SluiceValve)
3
-
-
... More
DI PIPES
-
-
-
... More
SITC of D.I. K-9 grade pipes for following nominal bore diameter with internal cement mortar lining including all taxes, insurance, transportation, freight charges, octrol, Inspection charges, loading. unloading, conveyance to departmental stores, stacking etc. complete. (IS 8329-2000). Rate for Dl pipe based on Wholesale Price Index of Pig Iron as 149.2 for the month of Jan-2022. For sewerage project cement mortor lining shall be with sulphate resistance cement. Double flanged DI pipes for delivery and header line, complete
20
-
-
... More
DI FITTINGS & SPECIALS
-
-
-
... More
Manufacture, Supply & Delivery of Ductile Iron Flange socket spigot bends, tees, reducers or any other specials as per BS-EN-545/1995 Class-A series K12 suitable for use with D.I. Pipes manufactured as per IS:8329/1994 delivery of specials is to be made to store or site of works any where in Gujarat including all taxes, loading, unloading. carling, slacking, insurance, Inspection charges, octroi etc. complete. With external bitumen & zinc coating & internal cement mortar liningt.Size: 350 mm to 600 mm dia.
2000
-
-
... More
Flanged Joints of Pipes, Fittings and Specials:
-
-
-
... More
Providing & Making Flanged DI Pipes, Fittings and Specials Joints with all jointing materials, rubber packing, nut bolts, labour etc. for completeconnection in all recpect.Size: 450 mm dia.
15
-
-
... More
Item Description as per 5.1.1 and of following size complete, Size: 600 mm dia.
1
-
-
... More
MONORAIL E.O.T. WITH ELECTRIC CHAIN HOIST
-
-
-
... More
Supply, installation, testing & commissioning of Electrically Operated Chain Hoist & Electrically operated Trolley, suitable to operate on Mono Rail Girder having motorised motion, manufactured as per IS:6547-1972-Class-II & IS-3177- Class-II, complete with brake, chain-gear, motors, safety device, pendant push button, starter panel, cables from motor to starter panel and all other required accessories like limit switches, power supply system (Fastoon cable type), fasteners, epoxy painting, etc. tested for over load as per IS and as per specifications, complete in all respect.Capacity : min. 2.0 Ton. Min. (For Subm. NC Pump-Lowering & lifting) Lift : 7.50 m as mini. or as per site req. Bay Length : 7.0 m min. or as per site req. (w/o MONORAIL GIRDER & MS supporting structure)Note: Min. as specified capacity or higher as per requirement such that EOT with ECH capacity is min.1.25 times of the pump set OR single heaviest component to be lifted within pump house.
1
-
-
... More
MANUAL CHAIN HOIST WITH H.O.T
-
-
-
... More
Supply, installation, testing and commissioning of Manuallly operated Spur Gear travelling trolley suitable to existing monorail girder with manual hand Operated Chain Hoist with tripple gear arrangement, lifting hook, load chain, hand chain & locking device, suiatble for vertical lifting/lowering and manufactured as per IS:3832-2005-Class-M4,complete with chain hoist, chain-gear, safety device and all other required accessories like fasteners, epoxy painting, etc. and tested to 25 % over load complete as per specifications and complete in all respect.Cap. : min. 1 Ton. (For Manual Coarse Screen-Lowering & lifting)''Lift : 6.00 m as mini. or as per site req. Length of Hand chain: 6.0 m or as per site req. (w/o MONORAIL GIRDER & MS supporting structure
1
-
-
... More
BOX TYPE MESH SCREEN
-
-
-
... More
Supply, Installation, Testing and Commissioning of Box Type Manual Mesh Screen having following size, made of SS-304 material having round bars of size 9 mm dia with clear bar opening as specified here below, suitably welded in outer frame of equal Leg SS angle of size 50 mm x 50 mm x 6 mm thick or higher, with intermediate support at required locations, complete as per specs. & shall also including followings: The screen shall be with SS perforated Screening Material Collection Box atbottom end of Screen having size as specified, fabricated from 3 mm thk SS sheet,screen shall be suitable to slide complete screen through rollersbetween guidepassage of MCP 400, embedded/ fixed in wall on both sides of RCC wall up to top of chamber with all necessary hardware, SS nuts, bolts & wahsers, sacrificialBrass lugs on sides, min. two lifting lugs/hooks & SS lifting chain havingintermediate link/chain of min. 150 mm dia. at every 1.5 m distance with shackle,etc. complete in all respects and provided with 1 set of cleaning rake with eachscreen, complete as per specification and complete in all respect. Screen Size: 1200 mm (W-or actual chamber width as per site) x 1200 mm (H) x 300 mm (D) Box size: 1200 mm (W-or actual chamber width) x 300 mm (H) x 300 mm (D) Opening: 50 mm x 50 mm sq. opening (Note: Manual mesh screen width to suit as per site requirement).
1
-
-
... More
SITC of Structure Steel at site of work with freight, loading, unloading carting,lowering, laying, fixing with fabrication various size section of MS etc. Including Labour Charges, including all taxes and duties complete such as joints, channels, angles, Iron Rails, ISA/ISMC/ISMB/MS flat, Plates, Chequered plates (min. 8 mm thickness) for cable trench etc. required for support structure of all Electromechanical equipment, piping, etc. for support on floor / wall / beam / brackets etc. as per tender and IS.
1500
-
-
... More
ELECTRICAL WORK
-
-
-
... More
TPN MCCB (For LT Service Obtaining Requirement) SITC of 250A TPN microprocessor MCCB (50kA) with O/L, S/C & E/F protection with Extended rotary handle, Terminal spreader, Auxiliary change over& Trip contact, with Outdoor Enclosure with canopy 2mm thick , Single/double door & Wall mounted/ stand mounted as per site requirement (with incoming & outgoing cable entry at bottom)with Cable end boxes with RYB indicating lamp, Digital voltmeter, VSS, ON, OFF & Trip indicating lamp etc as per Power supply company requirements & location. Including all civil works for fixing of panel on wall.(Wall mounted at Location as per PSC req.)
1
-
-
... More
MEDIUM VOLTAGE PANEL BOARD (PMCC) SITC of PMCC Panel (50kA), compartmentalized, Floor mounted, operating height maximum 1800/1900 mm, with paint shade RAL7035 with min100 micron paint thickness, Extensible on both ends, suitable for Manual & Auto operation - Local & through PLC/SCADA operation as per site conditions complete in all respects as per Tender SLD / Specification / IS and including following as minimum: (1) One no. 400A FP, 50kA Motorised Change Over switch for Main power & DG with Auto Source Transfer Controller with wire harness with R,Y,B, Mains ON & DG ON indication etc. (2) One no. FP 250A Microprocessor MCCB (50kA), LSIG for I/c with Digital Voltmeter, Voltmeter selector switch, Digital Ammeter, Ammeter selector switch, Digital PF meter, MFM with RS-485 of Class-0.5, Indicating lamps R,Y,B,On,off,Trip, 3 nos. 250A/5A, Cl.-0.5 metering CT, CL 0.5 CT for APFC relay etc. Constant voltage/control voltage transformer 1500VA, 415V/230V AC, with tapping +/-5% in steps of 2.5%, 16A DP MCB. (1.1) Surge protection device, 3P + N, Type 2 for lightning/surge protection. (3) 250A TPN Main Aluminium busbars. (main busbars size with current density 0.8A/Sq.mm) (4) STAR-DELTA STARTER FOR 55 KW MOTOR: 2 NOS: 55 KW or higher rating as per motor vendor Star-delta starter with 200A TPN Thermal magnetic MCCB with Adjustable O/L & Adjustable S/C protection, 140A AC3 duty contactors (3 Nos.), O/L Relay, star-delta timer, PMU, CT, Digital MFM with RS-485 of Cl.0.5, Auto-Manual, Local-Remote Selector Switch, MPR with RS-485, ON, OFF, TRIP Indication & pushbutton etc. for S/D
1
-
-
... More
(5) 63A TPN TM MCCB FEEDER : 2 Nos. (1 no. Spare, 1 no. for PDB) Each feeder comprising of 63A TPN Thermal Magnetic (TM) MCCB, with indicating lamps etc. (6) 32A TPN TM MCCB FEEDER : 1 No. (1 no. Spare) Each feeder comprising of 32A TPN Thermal Magnetic (TM) MCCB, with indicating lamps etc. (7) 63A TPN TM MCCB FEEDER FOR ALL MCB FEEDERS: 2 sets: Incomer: 63A TPN Thermal Magnetic (TM) MCCB, with indicating lamp etc. 7.1) 6 nos. 32A ''C'' curve 4P MCB feeders (For 1 no. LDB, 2 nos. Spare, 1 no. forICP, 2 nos. for DG sensing & Battery charging) 7.2) 1 no. 32A ''C'' curve 4P MCB with Time switch,32A contactor 4P, ON lamp feeders (for Outdoor LDB) (8) APFC separate cubical compartment (minimum 45 KVAr) having 1 no.100A TPN Thermal Magnetic MCCB 50KA with adjustable overload and adjustable short circuit, 6 step APFC relay with RS 485, 1 no. 100 A/5A, Cl.-1.0APFC CT, 1 no. 20 kVAR capacitor (APP type), with 7% detuned reactors, 63A TP D curve MCB, 2 nos. 10 kVAR capacitor (APP type) with 7% detuned reactors, 32A TP D curve MCB, 1 no. 5 kVAR capacitor (APP type) with 7% detuned reactors, 16A TP D curve MCB with capacitor Duty Contractor A/M switch, On delay timer etc., Push Buttons. Complete in all respects as per Specification, IS & SLD. (9) Multiplication relay as required for dry run protection of pumps. NOTE: 1). All MCCB shall be 50KA, Ics = 100% Icu, inbuilt protection with adj O/L and Adj.S/c (LSIG for MP MCCB), Extended rotary handle, Terminal spreader,Auxiliary Change over contact and trip contact as required. 2) All MFM,
-
-
-
... More
SITC of Lighting Distribution Board as under: 3 Phase 4 Wire 4P, double door Prewired LDB each for Indoor Lighting & Outdoor Lighting Suitable to house : Incoming: 32A FP, ELMCB (30mA) Outgoing: 20A SP MCB (9 nos.) & 6A SP MCB (9 nos.) (At Panel Room)
2
-
-
... More
SITC of Power Distribution Board (PDB) as under:
-
-
-
... More
3 Phase 4 Wire TPN, 6 way Pre-wired-MOG / MOV PDB for Auxiliary accessories Load power supply (For 1 no. EOT with ECH At P.H., For 1 no. EOT with ECH At Screen, For 1 no. WR-DB At P.H., Aux. load & Rest spare) Incoming: 63A 4P, MCB ''C'' Curve Outgoing: 6 nos. 32A 4P MCB ''C'' Curve
1
-
-
... More
SITC of LCS pushbutton station ON & OFF (E-stop) set complete with Enclosure, necessary mounting/ fixing arrangement on wall / pipe support etc. to be installed near motors for remote operation, etc. as per IS and specifications. (including structural steel) (For 2 nos. for Pump)
2
-
-
... More
SITC of stand / wall mounting type MS Junction Box, minimum 2.5mm thick, with detachable cable gland plate of 3mm thick, duly powder coated, with earthing terminals, steel structure stand for mounting of JB, etc. for Jointing/Termination suitable for 1.1 kV Submersible Flexible Copper Power cable with Aluminium/ Copper armoured power cable from PMCC . Scope shall include providing suitable rating AL busbars, Support insulators, Crimping type lugs,nuts,bolts,washers etc. complete in all respects as instructed by E.I.C. Drawing shall be got approved before SITC of the same. Lugs of cables shall not be connected directly. (Structure steel for Stand shall be measured separately) JB of minimum Size: 300mm x 300mm x 75mm or higher as required. or higher as required (for 2 nos. Pump)
2
-
-
... More
SITC of stand / wall mounting type MS Junction Box, minimum 2.5mm thick, with detachable cable gland plate of 3mm thick, duly powder coated, with earthing terminals, steel structure stand for mounting of JB, etc. for Joining/Termination suitable for 1.1 kV Submersible Flexible Control Cables of Submersible pump with control cable from PMCC. Scope shall include providing Terminal connectors for connecting control cable, copper lugs, etc. complete in all respects as instructed by E.I.C. 20% additional/spare Terminal connector shall be provided. Drawing shall be got approved before SITC of the same. SMC/FRP/Bakelite separator shall be provided between Power cable section & Control cable section. Lugs of cables shall not be connected directly (Structure steel for Stand shall be measured separately). JB of minimum Size: 300mm x 300mm x 75mm or higher as required. or higher as required (for 2 nos. Pump)
2
-
-
... More
LOW VOLTAGE (LT) CABLES Supply, laying, testing and commissioning of 1.1 kV, A2XFY(X)/2XWY(X) XLPE insulated (IS 7098) AL / Cu stranded conductor, Extruded inner sheath cables as per specification & IS. The cable when laid outside the building shall be laid underground in trench with brick & sand protection/in DWC pipes as per specified method and shall be laid in prepared trench/ on cable tray when laid inside the building. SITC of 3.5C x 240 sq. mm. A2XFY(X) Cable (1 run for MCCB to PMCC Panel)
30
-
-
... More
3.5C x 150 sq. mm. A2XFY(X) Cable (2 runs from DG set to AMF Panel & AMF Panel to PMCC Panel)
80
-
-
... More
3C x 35 sq. mm. 2XWY Cable (2 runs for PMCC Panel to 2 nos. 55kW Subm. Pump J.B.)
70
-
-
... More
4C x 10 sq. mm. A2XFY (X) Cable (For 1 no. PDB)
30
-
-
... More
4C x 6 sq. mm. A2XWY (X) Cable (For 1 no. Indoor LDB, Outdoor LDB, WR- DB with TPN MCB at Pump House)
80
-
-
... More
4C x 2.5 sq. mm. 2XWY(X) Cable (For 1 no. TPN MCB for EOT with ECH at P.H., For 1 no. TPN MCB for EOT with ECH at Screen, 3 nos. street light, 2 nos. for DG sensing & battery charging)
230
-
-
... More
5C x 1.5 sq.mm. 2XWY(X) Cable (For 2 nos. Pump LCS)
40
-
-
... More
12C x 1.5 sq.mm. 2XWY(X) Cable (For 2 nos. PMU)
40
-
-
... More
Single Core 95sq. mm. PVC insulated circular unsheathed copper conductor flexible Cable (For Power supply Metering Panel to I/C MCCB Unit)
30
-
-
... More
CABLE END TERMINATION AND CONNECTION: SITC of Double compression Ni-Plated brass cable glands and crimping type Bimetallic lugs / sockets with necessary tools and equipment''s as specified in specifications and IS. The glands and lugs / sockets shall be suitable for cable size and type mentioned below & as per specifications. 1) Earthing the glands and armouring with earthing clamp and jumper and also connecting to common earth bar. 2) The job also includes, if necessary, supply & fixing of extension busbar of same material on MCCB or panel board terminal / connector to connect more than one no. of parallel cables or to connect higher size cable to lower size unit. The job also includes earthing the glands and armour of the cable with common earth bar or flexible copper mesh.(Cable termination qty. shall be as per site requirement) SITC of 3.5C x 240 sq. mm. A2XFY(X) Cable (1 run for MCCB to PMCC Panel)
2
-
-
... More
3.5C x 150 sq. mm. A2XFY(X) Cable (2 runs from DG set to AMF Panel & AMF Panel to PMCC Panel)
8
-
-
... More
3C x 35 sq. mm. 2XWY Cable (2 runs for PMCC Panel to 2 nos. 55kW Subm. Pump J.B.)
12
-
-
... More
4C x 10 sq. mm. A2XFY (X) Cable (For 1 no. PDB)
2
-
-
... More
4C x 6 sq. mm. A2XWY (X) Cable (For 1 no. Indoor LDB, Outdoor LDB, WR- DB with TPN MCB at Pump House)
6
-
-
... More
4C x 2.5 sq. mm. 2XWY(X) Cable (For 1 no. TPN MCB for EOT with ECH at P.H., For 1 no. TPN MCB for EOT with ECH at Screen, 3 nos. street light, 2 nos. for DG sensing & battery charging)
14
-
-
... More
5C x 1.5 sq.mm. 2XWY(X) Cable (For 2 nos. Pump LCS)
4
-
-
... More
12C x 1.5 sq.mm. 2XWY(X) Cable (For 2 nos. PMU)
6
-
-
... More
Single core 95sq. mm. PVC insulated circular unsheathed copper conductor flexible Cable (For Power supply Metering Panel to I/C MCCB Unit)
10
-
-
... More
CABLE TRAY SITC of G.I. Ladder type with top cover medium duty (2mm thick) Cable Tray with necessary bends, tees, coupler plate and clamps for fixing. All material shall be Hot dip galvanised as per Specification. 300 x 100 mm - Ladder type
30
-
-
... More
150 x 50 mm - Ladder type
80
-
-
... More
Cable Trench, Laying & Installation of Cable: Making cable trench in soft soil of suitable width of 90cms deep for laying cable, Sand cushioning and brick protection on sides and on top all over the run and back filling the same and making the surface as normal ground as per IS & Specification. (For laying of LT cable in ground)
50
-
-
... More
CHEMICAL EARTHING SYSTEM SITC of Maintenance free chemical earthing (copper) with earthpit of minimum bore size dia. 225mm Safe Earthing Electrode consisting Pipe-in-Pipe Technology as per IS-3043:1987 /Tech spec. made of corrosion free Pipes having Outer pipe dia of 48 mm having 250 Micron copper plating, Inner corrosion free Hot dip galvanised (80 to 100 micron) pipe dia of 26 mm with copper flat strip type connection terminal 14mm dia with constant ohmic value surrounded by highly conductive corrosion resistant chemical compound with high charge dissipation suitable for electrical installation & of 3Mtr. length of Pipe with two nos. 25Kg. bag of Back filling compound.. (2 nos. for ICP/PLC earthing, 2 nos. for DG neutral earthing) NOTE: Earthing Resistance value & date shall be painted on the chamber cover.
4
-
-
... More
SITC of Maintenance free chemical earthing with earthpit of minimum bore size dia. 225mm Safe Earthing Electrode consisting Pipe-in-Pipe Technology as per IS- 3043:1987 /Tech spec. made of corrosion free Hot dip Galvanised (min 150 Microns) Pipes having Outer pipe dia of 76 mm , Inner corrosion free Hot dip galvanised (80 to 100 micron) pipe dia of 26 mm with copper flat strip type connection terminal 14mm dia with constant ohmic value surrounded by highly conductive corrosion resistant chemical compound with high charge dissipation suitable for electrical installation & 3Mtr. length of Pipe with two nos. 25Kg. bag of Back filling compound. (2 nos. for PMCC Panel, 2 nos. for DG body earthing & all elect. Equipments) NOTE: Earthing Resistance value & date shall be painted on the chamber cover.
6
-
-
... More
SITC of 50mm(w) x 8mm(T) etc. sizes as required, HOT dip galvanized GI Strip including supply & fixing using GI spacers, saddles when laid inside the building and inclusive of excavation & refilling of earth when laid outside the building & interconnection with earth pit & all electro-mechanical equipments. (50X8 G.I Strip wt.3.12 kg/m, 3.12x80Mt.=249.6 kg)
250
-
-
... More
Supply, laying and erection of 25mm(w) x 3mm(T) etc. sizes as required, HOT dip galvanized GI Strip including supply & fixing using GI spacers, saddles when laid inside the building and inclusive of excavation & refilling of earth when laid equipments. (25X3 G.I Strip, 0.6 Kg/m, 0.6x 20Mt.=12Kg.)
12
-
-
... More
Supply, laying and erection of 25mm (w) x 3mm (T) etc. sizes Copper Strip including supply & fixing of bolts, saddles when laid inside the building and inclusive of excavation & refilling of earth when laid outside the building & interconnection with earth pit & PLC panel. (25 X3 Cu. Strip, 0.761 Kg/m, 0.761 x 20mtr.=15.22Kg.) Copper Bolt,Nuts ,Washers shall be used for Connecting Earth electrode toindividual eqp. Bitumen shall be used at the place of joint/welding. (PLC Panel toEarthing)
15
-
-
... More
SITC of HOT Dip Galvanized iron wire 8 SWG (For LDB, PDB, LCS, Street light,Gate light etc.) (8 SWG G.I Strip, 0.103 Kg/m, 0.103 x 150Mt.=16)
16
-
-
... More
INTERNAL WIRING
-
-
-
... More
SITC of Mains & outlet points wiring with 1.1 kV grade FRLS PVC insulated ISI marked flexible stranded copper conductor wires with medium class min. 25mm. dia. Electrical grade PVC pipe and accessories to be erected concealed in / to be run on surface / wall / ceiling with following sizes as mentioned below. The unit rate wirings shall be with connector, PVC junction box, wires, holder, ceiling rose, angle holder, switch, sockets, switch board, brass chromium / cadmium plated machine screws, phase and neutral wires, green Earth continuity wires etc. as required to complete wiring from LDB panel to the final outlet termination points. The wiring shall be as per IS:732, IS:4648 and as per tender specification / IS. (a) SITC of Mains wiring with 3 wire 1.5 sq.mm.
80
-
-
... More
As per Sr. No.-6.1 SITC of Mains wiring with 3 wire 2.5 sq.mm as per tender specification & IS.
70
-
-
... More
As per Sr. No.-6.1 SITC of Mains wiring with 4 wire 1.5 sq.mm as per tender specification & IS.
70
-
-
... More
As per Sr. No.-6.1 SITC of Mains wiring with 4 wire 2.5 sq.mm as per tender specification & IS.
80
-
-
... More
SITC of Point wiring for Light / fan / Bell / Primary Point with 2 nos. 1.5 sq. mm & earth wire of 1.5 sq. mm (green) both are of ISI marked 1.1 kv grade FRLS PVC insulated multistrand copper wires, pipe to be erected concealed in flushed on wall / ceiling, complete with 6A Tissino Type ISI marked flush type switch / bell push & accessories erected on metal / PVC Box covered with 3 mm thick PC (Polycarbonate) / Acrylic sheet with necessary lamp holder / ceiling Rose / H. D. connector as directed with medium class Rigid PVC pipe & accessories.
12
-
-
... More
SITC of 6A independent Plug with 2 nos. 1.5 sq.mm Cu. Mains size wiring & earthwire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires with medium class Rigid PVC pipe and accessories to be erected on wall / ceiling, complete with ISI marked 3 / 5 Pin socket and tissino type switch erected with earth continuity connection erected on Metal / PVC box covered with 3 mm thick PC(Polycarbonet) / Acrylic sheet. (1 no. for LT Room)
1
-
-
... More
SITC of 6/16A independent Plug with 2 nos. 4 sq.mm Cu. Mains size wiring & earthwire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires with medium class Rigid PVC pipe and accessories to be erected on wall / ceiling, complete with ISI marked 3 / 5 Pin socket and tissino type switch erected with earth continuity connection erected on Metal / PVC box covered with 3 mm thick PC(Polycarbonet) / Acrylic sheet. (1 no. for LT Room)
1
-
-
... More
SITC of One 300/380 mm dia. Ex fan 16A independent Plug point near Ex. Fan with 2nos. 4 sq.mm Cu. Mains size wiring & earthwire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires with medium class Rigid PVC pipe and accessories to be erected on wall / ceiling, complete with ISI marked 3Pin socket and tissino type switch erected with earth continuity connection erected on Metal / PVC box covered with 3 mm thick PC(Polycarbonet) / Acrylic sheet. Plug point shall be near Ex.Fan. 3(2 nos. at LT Room)
2
-
-
... More
SITC of Single Phase 20A 3 Pin Metal clad Industrial Type Socket with plug top and 20A SPMCB, suitable for flush mounting, in 16 SWG MS box of suitable size and covered with 3 mm thick electrical grade hylam sheet or equivalent ISI marked Electrical grade Bakelite sheet and earthing with 2.5 sq.mm complete as required. (1 no. for LT Room, 1 no. Pump House)
2
-
-
... More
SITC of Sheets steel powder coated weather proof enclosure suitable for as well as with incorporating One no. 32A, 415V MCB Four Pole for Motor & Inductive load (C Curve) having 10 KA breaking capacity & confirms to IS: 8828. (For 1 no. WR DB at P.H., 1 no. for EOT with ECH at P.H., 1 no. for EOT with ECH at Screen)
3
-
-
... More
LED LIGHT FIXTURES & LIGHTING: SITC of Indoor wall mounting 20Watt or up to 25% higher wattage LED 4 feet Tube Light indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA polyester powder coated and high U.V. & corrosion resistance with diffuser and/or Polycarbonate optics with company mark/name 120 to 300 V,Power Factor more than 0.9, THD < 20 %, CCT 4000 K to 6500K, Uniformity ratio >0.7, Luminaire efficacy> 85 lumens/watt , LED driver efficiency > 85 % (Each fitting required LM-79 & LM-80 Certificates)Tube Light with integral / non-integral driver, Surge-4KV,IP-20, 4 feet, Cat- III (For 4 nos. at LT Room)
4
-
-
... More
Item description as per Sr. No. 8.1 SITC of 7 watts LED Lamps integral type,cool white with PC diffuser suitable for B22 LAMP holder (1 no. for LT Room)
1
-
-
... More
SITC of 380mm sweep 1400 R.P.M exhaust fan, capacitor type, having double ball bearing, M.S.blades, mounting frame, forearms, suitable to operate on 230V,50 HZ AC supply conforming to IS: 2312.Fan shall be painted with epoxy grey colour controlled by one 6 A flush type switch on board and 6A plug point near Ex. fan.(2 nos. LT Room)
2
-
-
... More
1200mm sweep ceiling fan, capacitor type, having double ball bearing 450mm down rod, canopies, shackle, rubber bush, blades, electronic speed regulator, suitable to operate on 230V,50Hz AC supply conforming to IS: 374/1979.Fan shall be painted with white colour. (1 no. for LT Room)
1
-
-
... More
EXTERNAL LIGHTING (Flood LIGHT): SITC of 70W LED Wall mounted LED Flood Light fittings with High power White LEDs wattage of 1Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses with company mark/name engraved or embossed 120 to 300 V,Power Factor more than 0.95, THD < 20 %, CCT 5000 K to 5700K, Uniformity ratio >0.45, Luminaire efficacy> 85 lumens/watt . LED driver efficiency > 85 %. ( Each fittings required LM-79 & LM-80 certificates) (IP-65), Surge -4KV Cat-III For Outdoor use: (6 nos. for area lighting)
6
-
-
... More
SITC of ''B'' class galvanised iron pipe 32 mm outside dia 45 cms long duly welded on 20 cms x 20 cms x 3 mm thick M.S. base plate, erected on wall or corner for mounting luminaire with necessary hardware materials duly painted for wall mounting indoor flood light fixtures on Wall of Buildings & post top lantern.
8
-
-
... More
SITC of 40watt, Cat-III Post Top Lantern LED fitting comprises of 650 MM TOP Diameter, 120 degree beam angle with 3 Nos. Supporting Ribs and with 0.5 mt G.I fitting pile ( for gate Light)
2
-
-
... More
EXTERNAL LIGHTING (STREET LIGHT): SITC of Street Light Pole, steel tubular swaged type, 7.5 meter long with single arm & M.S.base plate with pipe cap and over hung 1.5 m long having dia to suit the socket of 240V LED street light fixtures. Street light pole unit rate shall be with (i) IP 65 SMC box of size 20 x 15 x 15 cms. with MCB & terminal strip inside the box with hinged/sliding door (ii) 50mm dia, B class GI pipe bracket min.1.5mtr long for Incoming & outgoing cable (iii)MS Cable Clamp of 25 x 3mm (iv)SITC of 1.5 Mtr.single Arm bracket of medium duty MS pipe of 4.2 cms. Outside dia complete with suitable sleeve tubing 45 cms. long of required size of pole top etc. and having spread of 1.5.mtr. length with 110 deg.(v) Complete painted with one coat of Red oxide / PU base primer and two coats of Aluminium / PU paint for Pole,Arm, pipe etc.
3
-
-
... More
SITC of 70W LED Street light fittings with High power White LEDs wattage of 1Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses with company mark/name engraved or embossed 120 to 300 V,Power Factor more than 0.95, THD < 20 %, CCT 5000 K to 5700K, Uniformity ratio >0.45, Luminaries efficacy> 85 lumens/watt . LED driver efficiency > 85 %. ( Each fittings required LM-79 & LM-80 certificates) Street Light (IP-65), Surge -4KV, 70 watt Cat-III
3
-
-
... More
SITC of M-20 / 1:2:4 cement concrete foundation for Street light pole & 70 % PCC from bottom including excavation for the pole of size 60 x 60 x 120 cms. Deep in below ground level with plinth of 45 cms x 45 cms(or 45 cms dia x 45 cms) high upper ground level with necessary curing and finishing in approved manner.
3
-
-
... More
DIESEL GENERATOR SET SITC of 200kVA or higher standard rating, 415 V,50 Hz, 3 Phase, 4 wire Diesel Generating Set. Diesel engine shall be complete with necessary controls and safety devices confirming to relevent ISS/BSS with latest amendements, DG controller unit with kWH meter. Diesel Engine shall be suitable for continuous operation of generator set duty inclusive of fly wheel, air cleaner, radiator. fan with guard, fuel pump, fuel filter, Electronic governor, auto main fail starting, electrical starting system with starter, 12V battery, voltage regulator, instrument panel, Exhaust silencer, protections against low lubrication oil pressure,high water temperature. Alternator shall be 415V, 3 phase, 50 Hz, 4 wire, 0.8 power factor, self excited,self regulated,brushless type,drip proof confirming to IS:4722 with latest amendments. The engine and alternator shall be coupled over a sturdy common base frame. Floor mounted,dust & vermin proof, indoor type control panel shall be consisting of Thermal magnetic MCCB of suitable normal current rating,with combined overload and earth fault protective relays/release, voltmetre with selector switch,ammeter of suitable range with selector switch, frequency meter, Energy meter, CTs, indicating lamps with fuse and switch control, complete & with necessary interconnections,fuses,lables and other accessories.Day fuel tank with necessary fuel hoses to the engine,all as per detailed specification and complete in all respect as required.
1
-
-
... More
SITC of Acoustic enclosure suitable for 200 kVA DG set, made out of 18 SWG, CRCA Sheet, Sound absorbing matewrial Rockwood of 64 density & 100 mm thick conforming ti IS:8183. The resin boinded Rockwood covered from inside level not more than 75 dB at a distance of 1 mtr, as PVCT / CPCB norms, on provided foundation.
1
-
-
... More
SITC of Providing & erecting approved make AMF panel suitable for 200 kVA 3 phase, 415 V, 50 cycles, A.C. diesel generating set complete of scope as detailed below: 1) Incomer of MCCB/ACB suitable to DG set of 200kVA with Digital Voltmeter with VSS, Digital Ammeter with ASS, RYB, ON-OFF-Trip indication and all other required items complete in all respects for proper functioning of DG. 2) Control and metering module: Line voltage monitor. Generator voltage monitor Ammeter 3 items attempt start facility. Air circuit breakers/ACB/MCCB of suitable rating for auto/manual operation. Auto/manual switch. Emergency stop push buttons. Manual start push button. frequency meter. Engine hour meter. Two earthing studs. 3) Protection module: The engine shutdown in the unlikely event of Low lube oil pressure High cylinder head temperature. V belt failure. 4) Indicators with alarm Load on generator. 5) Indicators Load on mains Engine fails to start . Emergency stop battery charger.
1
-
-
... More
SAFETY ACCESSORIES SITC of following safety accessories complete with necessary fixing brackets, other accessories and tools etc. as required to complete the job. Supply & Erecting carbon dioxide (CO2) fire extinguisher of 6.5kg capacity with necessary clamps made from 50 x 6 mm M.S. Flat with nut & bolts grouted in wall complete. (1 no. for LT Room, 1 no. for DG Set)
2
-
-
... More
Supplying of standard first AID box with antiseptic cream, medicine for use on wounds due burn, crepe bandage, guage bandage, medicated ready to use bandage (Band-aid) adhesive tape for medicinal user, scissors, antiseptic solution (Savlon or similar) etc. (All above contents shall be of standard makes) (1 no. for LT Room)
1
-
-
... More
Supply & fixing of printed instruction (First Aid) Chart both in English and Gujarati and duly framed with front glasses, for treatment of person suffering from electric shock. (1 no. for LT Room)
1
-
-
... More
Supplying & fixing of floor mounting stand for keeping four nos. of FIRE buckets comprising 1500 mm in length, 900 mm height frame made out of 30mm X30 mm X 4 mm angle iron with cross supports for legs, welded with 4 hooks and duly painted with one coat of red lead and two coats of approved enamelled silver paint. (1 no. for DG Set)
1
-
-
... More
Providing and erecting metallic vitrified danger notice board as per language suggested by engineer incharge for MEDIUM VOLTAGE installation to be erected as per IS-2551. ( For LT panel room & DG set area)
2
-
-
... More
Supply and fixing of 20 W fluorescent lamp operated emergency light with maintenance free battery for 3 hours operation during mains power failure.
1
-
-
... More
Supply and laying of Synthetic Insulating Mat of Class - A of min. thickness 2mm as per IS:15652 and with good electrical insulation property for 1.1KV/3.3KV as per site requirement. (for LT Panel)
4
-
-
... More
Providing pair of rubber hand gloves ISI make suitable for working on 22 KV supply
2
-
-
... More
LIASONING CHARGES FOR OBTAINING NOC Power Liasoning Charges for obtaining N.O.C from Electrical Inspector / Statutory authority for Power / Ele. Installation. (Fees shall be paid by tenderer for obtaining N.O.C. from Electrical Inspector / Statutory authority on behalf of client and shall be reimbursed on submission of original receipt to Client). Liasoning Charges shall include preparing required attested documents & drawing for obtaining NOC on behalf of client (Applicable Fees / deposits shall be reimbursed by Client).
1
-
-
... More
INSTRUMENTATION WORK
-
-
-
... More
INSTRUMENTATION: Supply, installation, testing & commissioning of Bourden type Pressure Guage glycerene filled having 150 mm dial with necessary fittings/accessories (Manifold valve, nipples, etc. shall be in SS 316 only) as per specifications & complete in all respects. Range : 0 - 6 Kg/cm2 (at each pump''s delivery side)
2
-
-
... More
Supply, installation, testing and commissioning of Hydrostatic type Level Transmitter for level based auto operation of pump along with 20 meter cable, junction box, all mounting accessories, hardware, Fixing of 2" size PVC pipe in sump for installation the Hydrostatic sensor, Clamp,etc. complete in all respects and as per specs and having following measurement ranges . Meas. Range: upto 6 m at sump
1
-
-
... More
Supply, installation, testing and commissioning of Float type Level Switch along with 5 mtr. Cable and WP Junction Box (at sump for dry run protection of pumps and inlet chamber for high level alarm) complete in all respects and as per specification.The scope also includes providing 4" flanged , puddle pipe approximate 300 mm long including fixing of the same in civil structure slabe of pump house for mounting of level switch.The work also include all necessary work like make hole,repair / modificationin slab, etc.
1
-
-
... More
ELECTRO MAGNETIC FLOWMETER Supply, installation, testing and commissioning of remote type Full Bore Electromagnetic flow meter comprising of IP-68 Sensor, IP-65/66 remote transmitter with 20 m cable between sensor and transmitter,Panel mounted flow indicator cum Totalizer along with all mounting accessories,complete as require , hardware, etc. and joing with pipe & associated items like valve, expansion bellows, complete in all respect and as per specs and shall have following size and measurement range. The scope also includes necessary connection with header pipe. Meter Size : 450 mm (At Header Line) Pipe size: 450 mm Flow Measurement Range: 300-1500 m3/hr Pipe Material : C.I
1
-
-
... More
PLC BASED INSTRUMENT CONTROL PANEL Supply, Installation, Testing & Commissioning of PLC Based Instrument control Panel with 10" Color Touch Screen HMI, Modbus Communication Port for MFM, Multiplication relay for Dry run protection of pump, etc. Instrument Control Panel ''(PLC Enclosure / Panel ) with necessary PLC based logic and wiring , Min 1 nos. flow indicator/totalizer, Min. 1 no. process Indicator,Min. 1 kVA UPS (with 60 min backup alongwith battery and all other accessories as per standard), etc. complete in all respects and as per specs PLC having minimum I/O count of 20DI / 10 DO / 4AI / 2AO.All work shall be carrierd out complete in all respects and as per tender specifications.
1
-
-
... More
INSTRUMENT CABLE & ACCESSORIES ''Supply, Laying, Installation, Connection, Termination, Testing & Commissioning of Instrument Cables, along with cable glands, lugs, cable trays, required junction boxes, fittings and accessores as per specs. The unit rate shall include a. Supply, loading & unloading of the cable at site from store. B. Shifitng of cable from site store to place of installation. c. Fixing of cable clamps, brackets, supports, route markers etc. where ever required to fix the cables safely. d. Excavation, back filling and levelling of ground alongwith laying of fine sand, protection bricks and other necessary civil material for laying cables outside the building. e.Testing and submission of sketches & reports of all the cables laid. POWER CABLE 3C X 1.5sq.mm.
25
-
-
... More
CONTROL CABLE 10C X 1.5sq.mm.
30
-
-
... More
SINGLE CABLE 1P X 1.5q.mm.
100
-
-
... More
INSTRUMENT CABLE TRAY GI Perorated type cable tray shall be made out of galvanized MS sheets of 2.0 mm thickness with required asccessories . All material shall be Hot dip galvanised as per IS 2629 as mentioned in specification and tray hardware shall be in GI.50 X 25 mm - Perforated type
30
-
-
... More
CABLE END TERMINATION AND CONNECTION : ''Supply, fixing, connection, testing and commissioning of double compression brass cable glands and crimping type Bimetalic lugs / sockets with necessary tools and equipments as specified in specifications and IS complete in all respects. The glands and lugs / sockets shall be suitable for cable size and type mentioned above. The job also includes earthing the glands and armour of the cable with common earth bar or flexible copper mesh as applicable.POWER CABLE 3C X 1.5sq.mm
2
-
-
... More
CONTROL CABLE 10C X 1.5sq.mm
4
-
-
... More
SIGNAL CABLE 1P X 1.5sq.mm.
8
-
-
... More
Construction of LT Room
-
-
-
... More
Excavation for foundation for loose and soft soil including sorting out and stacking of useful materials and disposing of the excavated stuff up to 50 meter lead.
-
-
-
... More
a) From 0.0 to 1.5 m.
37
-
-
... More
b) From 1.5 to 3.0 m
19
-
-
... More
Filling with available excavated earth (excluding rock) in trenches, plinth, sides of foundation in layers not exceeding 20 cm in depth consolidating each deposited layer by ramming and watering.
61
-
-
... More
Providing and casting in situ C.C. in grade M-15 (approx. corresp. to prop. 1:2:4) (proportions as per mix design or as per Table 9 of IS456 2000 in masses by weigh batching ) using granite, quartzite trap metal of size 6 mm to 20 mm for RCC work, including scaffolding centering, form work, needle vibrated consolidation, curing comp. up to 6 meter depth or height (excluding cost of reinforcement and neat finishing) with centering and shuttering/deshuttering etc. comp. for structure for other than water retaining. (With formwork)
6
-
-
... More
Providing and cast in situ C.C. in grade M-25 proportions of ingredients as per mix design by weigh batching using granite, quartzite trap metal of size 12 mm to 20 mm and or 6 mm to 12 mm including scaffolding centering formwork, needle vibrated consolidation, curing and hydrulic testing etc. complete (excluding cost of reinforcement) upto 6 meter height / depth Av. G.L.
-
-
-
... More
a) R.C.C. beams, lintels and bracket for gantry or chain pully blocks, plinth beams, tie beams.
6
-
-
... More
b) R.C.C. slabs and platform
6
-
-
... More
c) R.C.C. weather shed, pardi & staircase
3
-
-
... More
d) R.C.C. columns
4
-
-
... More
e) R.C.C. footing
7
-
-
... More
Supplying cutting, bending, binding and placing in position steel as per plan and design and as per ISS 2502 including cost of steel and binding wire for reservoirs/structures only including lift up to 6 meter height or depth below G.L. for all diameters Do - deformed (TMT) bars confirming to relevant IS Fe - 500 grade for all diameters.
3.3
-
-
... More
Purchasing, supplying, Lowering, Laying & fixing various size of M.S. section such as joints, channels, angles, plates, iron rails etc. complete including fabrication at site of works, with Railway freight, loading, unloding, carting etc. comlete. Angles & Channels above 10 mm thickness
0.4
-
-
... More
Providing and applying 15 mm thick cement plaster in single coat on brick work with floating coat of neat cement slurry for interior plastering finished even and smooth in Cement motar 1 : 3 (1 cement : 3 sand) including racking out joint curing, scaffolding required if any, with necessary cement finishing etc. complete as directed.
101
-
-
... More
Providing and applying 20 mm thick sand faced cement plaster at outside RCC / brick on work upto height 10 mtr. above ground level consisting of 12 mm thick backing coat of C. M. 1:3 (1 cement : 3 sand) and 8 mm thick finishing coat of C. M. 1:1 (1 cement : 1 sand) etc. complete
127
-
-
... More
Providing and laying polished Kota stone slab flooring over 20 mm (average) thick base of cement mortar 1:6 (1 cement : 6 coarse sand) laid over and jointed with grey cement slurry including rubbing and polishing etc. 30 mm thick
25
-
-
... More
Providing and laying polished Kota stone slab 25 mm thick in riser of steps, dado & pillars, skirting, laid on 10 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry including rubbing and polishing etc. complete
3
-
-
... More
Brick work using common burnt clay building bricks having crushing strength not less than 35kg / Sq. C. M. in ramp, steps and Foundation & Plinth in cement morter1:5 (1 cement : 5 coarse sand) including racking out joints, curing, scaffolding required if any etc. complete, as directed.
2
-
-
... More
Brick masonry in cement mortar (1:5) using common burnt clay building bricks having crushing strength not less than 35kg/cm2 including scaffolding,curing, etc. complete for walls, parapets, etc. at all levels.
23
-
-
... More
Distempering in ( two coats) with oil bound distemper of approved brand and manufacture and of required shade on wall surface to give an even shade over and including a primer coat with distemper primer of approved brand, thoroughly brushing the surface free from mortar dropping and other foreign material and also inclusive of preparing the surface even and smooth etc. complete,
101
-
-
... More
Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture of undercoated wall surface to give an even shade including thoroughly brushing the surface free from mortar dropings and other foreign matter and sand papered smooth.
127
-
-
... More
Providing and fixing iron doors including using the frames of channels, angles and flats and MS sheets as per drawing including revating or welding and fixing in concrete block including iron fixture and fastening with one coat of primer and 3 coats of enamel paint etc. complete.
315
-
-
... More
Providing and fixing window having extruded aluminum Colour anodized section frame main outer size 95mm x 24mm x 1.17 mm @ wt. of 0.738 Kg/mt, horizontal Three track member size 92mm x 31.75 mm x 1.30 mm@ Wt. 1.07 Kg/mt, vertical member of size 92mm x 31.75mm x 1.50 mm , @ Wt. 1.06 Kg/mt. with sliding shutters of horizontal member size 40mm x 18mm x .29 mm @ wt. 0.456 Kg/mt. vertical member of size 40mm x 18mm x 1.29mm @ wt. of 0.456 Kg/mt with 5 mm thick transparent bronze colour tinted float glass with powder coated aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame as per details etc.
7
-
-
... More
Providing & fixing in position aluminium grill with 15 micron natural matt brush finish anodised as per over all size shown on the drawings and aluminium sections of approved make conforming to IS:733 and IS : 1285, made out of DG - 104 design ( Jindal or equivivelent ) fixed with required size F channel, rawl plugs and screws or with fixing clips, or with expansion hold esters including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. and aluminium snap beading for glazing / panelling, C. P.brass/stainless steel screws, including standard anodised aluminium fittings and fixtures of approved make and of adequate size and in adequate numbers, including cost and fixing of fixtures etc. complete as per detailed drawings with all lead and lifts.
7
-
-
... More
Providing and fixing PVC pipe of 6Kg./cm2 of 140 mm dia for rain water with shoe.
19
-
-
... More
Providing and laying broken China Mosaic flooring for terrace using 12 mm to 20 mm broken pieces of glazed tiles to be laid over Cement mortar 1:3 to plain or slope and to be tempered to bring mortar crème out upto surface using white cement including rounding of junctions and extending them upto 15 cm. along the wall, clearing with water and oxalic acid etc. as directed.
18
-
-
... More
Cost Estimate For D. G. Set and Miscellaneous Work
-
-
-
... More
Excavation for foundation for loose and soft soil including sorting out and stacking of useful materials and disposing of the excavated stuff up to 50 meter lead.
-
-
-
... More
a) From 0.0 to 1.5 m.
11
-
-
... More
Providing and casting in situ C.C. in grade M-15 (approx. corresp. to prop. 1:2:4) (proportions as per mix design or as per Table 9 of IS456 2000 in masses by weigh batching ) using granite, quartzite trap metal of size 6 mm to 20 mm for RCC work, including scaffolding centering, form work, needle vibrated consolidation, curing comp. up to 6 meter depth or height (excluding cost of reinforcement and neat finishing) with centering and shuttering/deshuttering etc. comp. for structure for other than water retaining. (With formwork)
2
-
-
... More
Providing and cast in situ C.C. in grade M-30 proportions of ingredients as per mix design by weigh batching using granite, quartzite trap metal of size 12 mm to 20 mm and or 6 mm to 12 mm including scaffolding formwork, needle vibrated consolidation, curing andcentering hydrulic testing etc. complete (excluding cost of reinforcement) upto 6 meter height / depth Av. G.L. for all water retaining structures.
-
-
-
... More
a) R.C.C. slab and footings
11
-
-
... More
Supplying cutting, bending, binding and placing in position steel as per plan and design and as per ISS 2502 including cost of steel and binding wire for reservoirs/structures only including lift up to 6 meter height or depth below G.L. for all diameters Do - deformed (TMT) bars confirming to relevant IS Fe - 500 grade for all diameters.
0.9
-
-
... More
Items for Compound wall
-
-
-
... More
Fabricating and fixing in position MS structural ''section such as flat, pipes, plates, hold fast,anchoring bolts / bars of required size including ''fixing, welding and two coats of approved anticorrosive paint over prime coat of red-oxide including RCC gate column as per drawing etc. complete as directed by Engineer- in-charge. a) 2.0 m height and 3 m wide main
0.3
-
-
... More
Providing and fixing 1.20 Metre high fencing with 2.0 Metre long M.S.Angle posts 40mmx40mmx6mm and oil painting 3coats fixed at 2.5Mt,C/c .with five Horizontan line sand two diagonals of galvanised steel barbed wire weighting 9.38 Kg.per 100 Metre,strained and fixed to posts with G.I,staples including fixing the posts in ground with 0.5Mx0.5.Mx0.5M.block in C.C1:5:10 etc complete.
53
-
-
... More
Construction of road including with 150 mm thick WBM with 22.4 to 53 mm aggregate,150 mm thick WBM with 45 mm to 63 mm aggregate,150 mm thick GSB I with necessary excavation/loosening and recompacting ground as per respective MoRTH specification and as directed by engineer in charge
40
-
-
... More
COST ESTIMATE FOR RISING MAIN FROM PROPOSED PS TO EXISTING DRAIN
-
-
-
... More
Excavation for pipe line trenches etc. for all with shoring and strutting if required as per required gradient and line including safety provisions using site rails and stacking excavated stuff including up to all required lead cleaning the site etc. complete for all lifts and strata as specified. In all sort of soils and soft murrum
-
-
-
... More
- 0 to 1.5 mt. Depth
65
-
-
... More
- 1.5 mt. to 3.0 mt. Depth
4
-
-
... More
Providing & supplying DI K-9 grade pipe with EPDM gasket for following nominal bore diameter with internal cement mortar lining including all taxes, insurance, transportation, frieght charges, Octroi, inspection charges, loading unloading, conveyance to stores, stacking, etc. complete as per IS 8329- 2000.
-
-
-
... More
* 600 mm dia.
20
-
-
... More
Lowering, laying and jointing DI Pipes of various classes with specials of following diameters in propoer position grade and alignment as directed by Engineer in charge including hydraulic testing etc. complete.
-
-
-
... More
* 600 mm dia.
20
-
-
... More
D.I. Specials - Manufacture, Supply,Delivery & fixing of Ductile Iron Socket Spigot Bends, tees,reducers or any other specials as per BS-EN-545/1995 Class-A series K12 suitable for use with D.I Pipes manufactured as per IS:8329/1994 delivery of specials to the site including fixing, all taxes, loading, unloading, carting, stacking, insurance, inspection charges, octroi etc. complete.
-
-
-
... More
* Above 300 mm dia
80
-
-
... More
Providing and casting in situ C.C. in grade M-15 (approx. corresp. to prop. 1:2:4) (proportions as per mix design or as per Table 9 of IS456 2000 in masses by weigh batching ) using granite, quartzite trap metal of size 6 mm to 20 mm for RCC work, including scaffolding centering, form work, needle vibrated consolidation, curing comp. up to 6 meter depth or height (excluding cost of reinforcement and neat finishing) with centering and shuttering/deshuttering etc. comp. for structure for other than water retaining. (With formwork) (For thrust block)
2
-
-
... More
"Providing and casting in situ C.C. in grade M-20 (proportions as per mix design or as per table9 of IS456 2000 in masses by weigh batching ) using granite, quartzite trap metal of size 6 mm to 20 mm for RCC work, including scaffolding centering, formwork, needle vibrated consolidation, curing complete up to 6 meter depth or height (excluding cost of reinforcement and neat finishing) with centering and shuttering/deshuttering etc. complete for structure other than water retaining (Below G.L)(For thrust block and Encasing)"
9
-
-
... More
Supplying cutting, bending, binding and placing in position steel as per plan and design and as per ISS 2502 including cost of steel and binding wire for reservoirs/structures only including lift up to 6 meter height or depth below G.L. for all diameters Do - deformed (TMT) bars confirming to relevant IS Fe - 500 grade for all diameters.
0.26
-
-
... More
Refilling the pipeline trenches including ramming,watering, consolidating disposal of surplus stuff asdirected within a radium of 3 Km.
63
-
-
... More
LAGOON AND DRAIN
-
-
-
... More
Clearing and grubbing road land including uprooting rank vegetation grassbushes, shrubs, sapling and trees girth upto 300mm removal of stumps of trees cut earlier and disposal of unserviceable materials © By mechanical means in area of light jungle.
0.5
-
-
... More
Excavation for foundation for loose and soft soil including sorting out and stacking of useful materials and disposing of the excavated stuff up to 50 meter lead.
-
-
-
... More
a) From 0.0 to 1.5 m.
140
-
-
... More
b) From 1.5 to 3.0 m.
50
-
-
... More
Providing and laying in positions mechanically mixed Plain Cement Concrete M15 grade for leveling course below foundation, tie wall etc. as directed by Engineer-in-charge with graded stone aggregate from 6 mm to 20 mm including curing complete including cost of formwork in (A) Foundation
5
-
-
... More
Providing and laying in positions mechanically mixed Cement Concrete M20 grade for C.C. lining in lagoon etc. as directed by Engineer-in-charge with graded stone aggregate from 6 mm to 20 mm including curing complete.
13
-
-
... More
Providing and laying controlled cement concrete M.25 and curing complete excluding the cost of formwork and reinforcement for reinforced concrete work in
-
-
-
... More
Base slab
6
-
-
... More
Walls
8
-
-
... More
Providing form work of ordinary timber planking so as to give a rough finish including centring. Shuttering strutting and propping etc. Height of propping and centring below supporting floor to ceiling not exceeding 4M. And removal of the same for in including reinforced concrete and plain concrete work in :
-
-
-
... More
Base slab
9
-
-
... More
Walls
96
-
-
... More
Providing and fixing TMT Fe 500 steel bar including cutting , bending ,hooking and tying complete as per detailed drawing for drain.
1
-
-
... More
Providing and fixing M.S. grating in drain as per detailed drawing and specification including painting with two coat of anticorrosive paint etc completed
560
-
-
... More
Filling available excavated earth (excluding rock) in trenches.plinth, sides of foundations etc.in layers not exceeding 20 cm.in depth consolidating each disposited layer by ramming and watering.
14
-
-
... More
Cost Estimate For Road works & Structural gate
-
-
-
... More
Clearing and grubbing road land including uprooting rank vegetation grassbushes, shrubs, sapling and trees girth upto 300mm removal of stumps of trees cut earlier and disposal of unserviceable materials © By mechanical means in area of light jungle.
0.5
-
-
... More
Box cutting the road surface to proper slope and camber for making a base for road work including removing the excavated stuff and deposit it as directed with all lead & lift
200
-
-
... More
Construction of Subgrade with approved material obtained from borrow pits with all lifts and leads, transporting to site spreading, grading to required slope and compacting to meet requirement to MoRTH table 300-2 in layers not more than 200 mm thick as directed by engineer in charge.(Effective CBR Minimum 8 %)
90
-
-
... More
Construction of granular sub-base (Grade - 1) by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per MoRTH clause 401..
36
-
-
... More
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per MoRTH Clause 406.
45
-
-
... More
Providing and applying Prime coat with Slow Setting Bitumen Emulsion binder (SS- 1) @ rate of 7.5 Kg./10 sq.m. of road surface using Emulsion pressure sprayer etc. Cleaning the road surface complete including cost of material labour etc. complete as directed by engineer in charge.
180
-
-
... More
Providing and laying 75 mm thick Dense Graded Bituminous Macadam in layers (single layer not more than 75 mm ) using BT stone chips as per MoRTH gradation and specification with Bitumen Grade (VG 30) for mixing @ 45.00 Kg /MT of total Wt. of mix i.e (4.50 % of total weight mix)including tack coat @ 2.5 kg/10 smt with Bitumen Emulsion (Rapid setting) and mixing aggregate & asphalt by batch mix plant and spreading the same by sensor paver finisher including rolling & consolidation with 10-12 tonne vibratory roller & providing all materials equipment''s tools & plants, fire wood, oil , kerossene,labour charges , using contractor ''s own machinery etc Complete as directed by engineer in charge as per MoRTH Specification
34
-
-
... More
Providing and applying tack coat with Rapid Setting Bitumen Emulsion binder (RS- 1) @ rate of 3 Kg./10 sq.m. of road surface using Emulsion pressure sprayer etc. Cleaning the road surface complete including cost of material labor etc. complete as directed by engineer in charge.
180
-
-
... More
Providing and laying 40 mm thick of compacted Bituminous concrete using BT aggregate as per MORTH gradation ,specification and asphalt Grade VG 30 mixing @54.00 Kg /MT of total Wt. of mix i.e. (5.40% of total weight mix) including heating and mixing aggregate & asphalt by batch mix plant spreading the same by sensor paver finisher including rolling & consolidation with 10-12 tone vibratory roller, Tandem Roller ,PTR & providing all materials equipment''s tools & plants, fire wood, oil , kerosene, labor charges , using contractor ''s own machinery etc. Complete as directed by engineer in charge as per MoRTH Specification
20
-
-
... More
Providing and fixing M.S. Gate as per detailed drawing and specification including painting with two coat of anticorrosive paint etc completed
600
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements