Labour And Employment Department Tender

CATEGORY: CALIPER INSIDE SPRING-6 INCH OR CM , CALIPER HERMACHRODITE SPRING-15 CM , CALIPER OUTSIDE SPRING-6 INCH OR15 CM , DIVIDER SPRING-6 INCH OR 15 CM , HACKSAW FRAME-FIXED TYPE 300 MM , SAFETY GOGGLES OR GLASS , PLASTIC OR FIBER , PUNCH DOT SLOT-DIA 10 X 100 MM , STRAIGHT EDGE ENGINEERS- 300 X 50 X 12 MM BEVELLED EDGE. , SCREW OR STUD EXTRACTORS SIZES 1 TO 8 SET , COMBINATION SET-300 MM RULE COMPLETE SET , MICROMETER INSDIE-25 MM TO 50 MM LEAST COUNT 0.01 MM WITH EXTENSION RODS UP TO 150 MM , VERNIER BEVEL PROTRACTOR-300 MM WITH ACUTE ANGLE ATTACHMENT , UNIVERSAL SCRIBING BLOCK- 220 OR 225 OR 250 MM. PILLAR. , BLOCKS VEE-150 X 100 X 100 MM. , ANGLE PLATE ADJUSTABLE-150X150X250 MM , DRILL TWIST TAPER SHANK-8 MM TO 20 MM BY 0.5 MM , TAPS AND DIES COMPLETE SET- 5, 6, 8, 10 AND 12 MM SET OF 5 , FILE FLAT 2ND CUT-300 MM SAFE EDGE , FILE SWISS TYPE NEEDLE SET OF 12 NOS.-150 MM , FILE HALF ROUND 2ND CUT-250 MM , SOLDERING IRON-250 W WOODEN HANDLE , BOX SPANNER SET-6 TO 25 MM SET OF 10 PCS WITH TOMMY BAR DIA 6,8 ,10,12,14, 16 , CLAMP OR VICE TOOL MAKER-5 CM AND 7.5CM SET OF 2. , HAND REAMER SET -TAPAR PIN STRAIGHT FLUTE-NOMINAL DIA 6, 8, 10, 12, 16MM , REAMER MACHINE-12 MM TO 16 MM IN STEPS OF 0.5 MM SET , SCRAPER FLAT-12 MM X 150 MM. , SCRAPER-3 CORNER 15 CM. , SCRAPER HALF ROUND-15 CM. , CHISEL COLD-9 MM ROUND NOZE 100 MM , PIPE DIE WITH DIE STOCK-0.75 INCH OR 19 MM , MORSE TAPER SLEEVES-NO. 0TO1, 1TO2,2TO3,3TO4,4TO5, , FIRE BUCKET OR SAND BUCKET , POWER TOOL-FOR FASTENING CAPACITY 10 TO 18MM , PROFILE GAUGES PLATE TYPE-FOR DEMONSTRATION METRIC STANDARD , KNURLING TOOL- DIAMOND, STRAIGHT AND DIAGONAL , BORING BAR INDEXABLE WITH INSERT 1INCH SHANK , TEMPERATURE GAUGE RANGE-0 TO 150 CELSIUS , LAPPING PLATE-6 INCH DIA , DRILLS GUAGE STRAIGHT SHANK LETTER SIZES A TO Z WITH GUAGE , DRILLS GUAGE STRAIGHT SHANK WIRE SIZE 1 TO 60 WITH GUAGE , DRILL GAUGE-1,5 TO 12.5 MM IN STEPS OF 0,5 MM , JIGS AND FIXTURE SAMPLE-FOR DEMONSTRATION , DRIFT DRILL 200 MM HARDENED AND BLACK FINISH , PULLER SET UNIVERSAL BEARING AND BUSHES , POKER-900 MM LONG , HAMMER FLAT HEAD WITH HANDLE , HAMMER PLANISHING WITH HANDLE , STAKE HATCHET WITH LEG.-300 X 200 X 20 MM , STAKE GROOVING.-100 X 100 X 300 MM , GAUGE -SNAP GO AND NO GO-25 TO 50 MM BY 5 MM. , GAUGE PLUG SINGLE ENDED-5 TO 55 BY 1 MM. , SINE BAR-125 MM. , SCREW THREAD MICROMETER-WITH INTERCHANGEABLE. PITCH ANVILS FOR CHECKING METRIC THREADS 60. 0 TO 25 MM LC 0.01 MM , DEPTH MICROMETER.-0 TO 25 MM ACCURACY 0.01 MM WITH STANDARD SET OF EXTENSION RODS UPTO 200 MM , COMPARATOR STAND WITH DIAL INDICATOR. , VERNIER BEVEL PROTECTOR-RANGE 360DEG, LC.5MIN , 150MM BLADE , CARBIDE WEAR BLOCK-1 MM TO 2 MM. , TOOL BIT HOLDER AS ARMSTRONG-R.H. , TOOL BIT HOLDER AS ARMSTRONG-L.H. , TOOL BIT HOLDER AS ARMSTRONG- STRAIGHT. , PIPE BENDER SPOOL TYPE WITH STAND MANUALLY OPERATED.-UP TO 25MM , ADJUSTABLE SPANNER OR WRENCH -375 OR 380 MM