Institute For Plasma Research Tender

Light fixtures

Supply, assemble, installation, connection, testing and commissioning of 35W-40W LED post top light fixtures for street light with having IP 65 protection, inbuilt surge protection device along with necessary modification to fix LED light fixture with existing street light pole (if required), connection with flexible copper conductor wire, Earthing Connection to each fittings & fixtures, necessary hardware etc. to complete the work in all respect as directed by Engineer-in-Charge or his representative. Similar to Havells make RUBYPT35WLED or crompton make Chaplet from the preffered makes.

Supply, assemble, installation, connection, testing and commissioning of 100W, 5700-6500K LED flood light fixtures, IP66, Symmetric, with in built surge protection, necessary fixing accessories, connection with flexible copper conductor wire, Earthing Connection to each fittings & fixtures, necessary hardware etc. as required and directed by Engineer-in-Charge or his representative. Similar to Havells make Jeta Alba from the preffered makes.

Supply, assemble, installation, connection, testing and commissioning of 30-35W four feet long suspended type LED light fixtures to be fix with required hanging arrangement matching with the existing hanging arrangement and mount the light in proper line and level, connection with flexible copper conductor wire, Earthing Connection to each fittings & fixtures, necessary hardware etc. as required and directed by Engineer-in-Charge or his representative. Similar to Philips make SM270 from the approved makes.

Providing and fixing of bare aluminium sections of required sections to be fixed in hanging arrangement, to install the light fixture in proper line and level, including required fixing accessories, cutting, providing hole, etc. as per the section/design approved by EIC.

SITC of LT CABLES: Aluminum/copper Conductor, XLPE Insulated, Armoured Cables of following Specifications & sizes : Supply, Laying, Installation, Testing and Commissioning of 1.1 KV grade, 2C/3C/3.5C/4C, XLPE insulated of following sizes. The cable shall be laid in existing hume pipe below ground level or on wall / ceiling with clamps, or through RCC Hume Pipes / Ducts / sleeves / pipes / holes / cable trenches etc complete as required, but excluding the cost of excavation/back-filling and Cable Trays. The scope also includes making necessary holes in walls / ceilings / floors etc as required. Cable tag shall be provided and fixed on the cable at bothe the end of cable or as required.

4 Core x 10 Sq. mm Al. Arm. Cable

Point wiring: The scope for each item of Point Wiring, includes Supply, Installation, Testing and Commissioning, including supplying all materials like Switches, Sockets, MS/PVC Box, Wires, Conduits & accessories, junction boxes, Hardwares, saddles & clamps, connectors, neutral links, ferrules, Cu lugs, Insulating Tapes, Identification Labels etc and all works like laying / jointing / clamping of conduits, drawing of wires, installation of switch-boards, etc complete and testing & commissioning complete as per Instruction & Direction of Engineer-in-Charge or his authorized representative/s. Further, the scope for unit rate of each item of Point Wiring also includes, Supply & Laying of 25mm wide (inner), MMS, Electrical grade, ISI marked PVC Conduits/casing caping in Wall/floor with accessories, hardware, etc. complete. The conduit/casing capping shall be run on wall/ceiling/column/beams as per site conditions maintaining line and level as well as good workmanship and as instructed & directed by Engineer-in-Charge or his authorized representative/s. Supply & Wiring with 1100 volt grade ISI marked PVC - FRLS insulated (IS 694 with latest amendments) wires having flexible (multi strands) copper conductors.

Supply & installation of modular type, ISI marked Switches, ISI marked (IS-1293) Sockets, MS/PVC Box with its necessary accessories, including connectors, brass chromium/cadmium plated screws, complete as required to complete the work. Making zurry in wall/floor/column etc. filled with mortar, apply chicken mesh on filled zurry will be in the scope of work of contractor. Zurry shall be made by cutter only as per required size with good workmanship. All the wiring & conduiting, from Distribution Boards to Switch boxes for Circuit Mains, form Switch boxes to switch boxes for Sub Circuit Mains, and from Switchboard to outlet Light/Fan/Power Points etc complete as required. The size of the switch  board shall be selected so as  to accommodate the required no. of switches, sockets without overcrowding the box. The size of the wires shall be as follows : 3 nos. separate wires shall be drawn for Phase, Neutral and Earth for each point from the Switch Board to the Outlet Points and for secondary points also. (a) From DB to Switch board (Lighting switch board): 2.5 Sq.mm flexible Cu wires for Phase & Neutral, and 1.5 Sq. mm flexible cu wires for earth.

(b) For Light and 6A Switch-Socket Points : From Switch Board to Outlet Point : 1.5 Sq.mm flexible Cu wires for Phase / Off, Neutral, and Earth, 3 nos. separate wires for each point. (C) For 6/16A Socket Points : From Distribution Board to Outlet Point : 2.5 Sq.mm flexible Cu wires for Phase / Off, Neutral, and 1.5 Sq.mm. Flexible Cu. Wires for Earth, 3 nos. separate wires for each point. (D) For 16A Socket Points (for AC and special purpose): From Distribution Board to Outlet Point : 2.5 Sq.mm flexible Cu wires for Phase / Off, Neutral, and 2.5 Sq.mm. Flexible Cu. Wires for Earth, 3 nos. separate wires for each point. From Distribution Board to Outlet Point : 2.5 Sq.mm flexible Cu wires for Phase / Off, Neutral, and 2.5 Sq.mm. Flexible Cu. Wires for Earth, 3 nos. separate wires for each point. Rates of power points wiring items is inclusive of necessary power circuit from the DB to the power socket.

Primary Point: Point Wiring for Primary Point complete as per Item No. 6.00 above with 6A Modular switch for control and as directed by Engineer in Charge or his representative.

Secondary point wiring: Point Wiring for Secondary Point, looped from the adjacent primary points complete as per Item No. 6.0 above, but without switch and as directed by Engineer in Charge or his representative.

Fan Point: Point wiring complete as per item no.6.0 but with 120w hume free step type fan regulator with required fixing accessories (i.e. Fan hook, etc.) complete in all respect and as directed by Engineer-in -Charge.

6A plug point on switch board: Point Wiring complete as per item No. 6.00 above, but for 6A one-way Modular type Switch and 6A, 5 pin Socket, installed in and wired from the Lighting Switch Board.

1 Nos. 6A Switch socket plug point at Separate Location: Point Wiring complete as per item No. 6.00 above but for 1 Nos. 6A modular switches, 5 pin universal Socket including cover plate, suitable size MS box etc. complete in all respect as directed by Engineer in Charge or his representative.

2 Nos. 6A Switch socket plug point : Point Wiring complete as per item No. 6.00 above but for 2 Nos. 6A modular switches, 5 pin Socket including cover plate, suitable size PVC box etc. complete in all respect as directed by Engineer in Charge or his representative.

16A plug point (For Special purpose): Point Wiring complete as per item No. 6.00 above, with 16A modular type Switch and 16A Socket including screws, cover plate, MS box etc. complete in all respect as directed by Engineer in Charge or his representative.