Institute For Plasma Research Tender

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour In TWO coat or More coat. Note:- Rates includes scaffolding, crack opening and filling with approved filler material (filling cracks - SBR polymer with cement as per manufacturers specification). Measurements will be done as per relevant IS Code. Complete all as directed by EIC.

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New /old work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm, including scrapping, sand papering and preparing the surface, complete in all respect as per the direction of Engineer-in-Charge. Note:- Rates includes scaffolding, surface preparation, removing of old paint / lime washing as required, appying wire brush on existing surface, washing, crack opening and filling with approved filler material (filling cracks - SBR polymer with cement as per manufacturers specification). The paint coefficient will be 1.00 irrespective of applying on plain / sand face plaster / brick surface. No extra measurement will be paid for painting on rough or sand face plaster or brick surface with groove. Complete all as directed by EIC

Providing and Applying two coats of Synthetic enamel paint on old doors and windows, MS members using 1st quality paint from approved manufacturer of approved colour and shade to give an even shade including scaffolding, removing of old existing paint that is soft, blistered, loose or flanking & cleaning old surface, preparing the surface to receive paint including filling cracks and creaves with Putty or other approved filler materials, applying oil primer coats / anti corrosive zinc based yellow primer to steel work. cost also includes thinner, filler, putty, primer and other materials, necessary labours etc. complete as directed by Engineer in charge at all heights, in all floors. Note:- Measurements of doors and windows will be taken as per relevant IS code. Surface area of all MS Members will be taken for measurement (1) Synthitic enamel Paint of approved brand (2) Zinc based yellow Primer (3) Putty suitable to Mild steel members of approved brand (4) Putty on wood work - oil base putty

Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration.

Supplying chemical emulsion in sealed containers including delivery as specified Chlorpyriphos/ Lindane emulsifiable concentrate of 20%

Providing and fixing sunfilm matching with existing sunfilm-Garware G-20 SRC or 3M or ALKOR. Rates includes fixing by authorized agency with scaffolding at all height and taking out of old damage film (if required). Measurement will be take of actual work done. Payment of wastage will not be given.

Providing and applying two or more coat of silicon based water repellent coating on dholpur/brick with filling of Horizontal and vertical joints with matching cement based colour pigment. Rate including scaffolding (at any height), filling the cracks and crevices with approved filler material (Dr. Fixit Crack X or equivalent), preparation of the surface so that surface becomes free from all debris, dirt, oil, grease, wax and all other contamination which could prevent penetration.etc. To improve penetration, Apply second coat wet on wet.Complete as per manufacturer specification and as directed by EIC. NOTE: Required Paint coefficient has to be considered in the quoted rate. Hence separate coefficient will not be considered while measuring the area for painting and area will be measured flat. The paint coefficient will be 1.00 irrespective of applying on dholpur stone cladding / Brick /plaster/ sand face plaster surface etc. No extra will be paid for rough surface. - (1) Coating - Dr Fixit Repellin WR (product no-103) (2) Crack filler - Dr. Fixit Crack X or equivalent

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm

Supplying and fixing Chromium plated Brass lock 6 levers 100mm of approved quality aluminum door lock with two keys, suitable either to single or double leaf shutters including removing of existing old door lock from existing door frames, making necessary recess in existing aluminum frame and fixing the new door lock with CP. Brass steel screws, etc.; complete as directed by Engineer-in-charge.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 300x10 mm

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.

Providing and laying Unbacked flexible P.V.C flooring/ skirting with P.V.C sheets as specified below of approved make and shade including preparing the surface, cleaning as required and applying adhesive - as recommended by the P.V.C manufacturers, laying, aligning, cutting in required size and pattern, trimming of tiles, removing the adhesive stains on the surface including cleaning the surface with soap solution (2 table spoons of soap powder for 5 ltrs of water) using a cloth or mop or and wiping the dried surface with soft dry cloth etc. complete all as per specifications. In PVC flooring/ skirting/ dadoing: With 2mm thick Unbacked flexible fully homogeneous PVC sheets in rolls of approved make and quality make conforming to IS: 3462-1986.

Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns).The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, filling of existing crack (if any) with cement and SBR polymer paste, omplete in all respect as per the direction of Engineer-in-Charge.

Dismantling the old plaster or skirting, raking out joints, and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50mtr lead. Note:- Rates includes scaffolding ,staging & surface preparation. Measurement will be taken in actual area to work to be done, no additional labour rate will be made. Work to be complete in all respect as directed by EIC.

15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix : 1:4 (1 cement: 4 fine sand) Note: The rate is including scaffolding, curing etc.The Plater should be of single coat Mala finished.

Providing and filling silicon sealant at the joint of aluminum and plaster of size 5 mm x 5 mm in triangle shape to make the surface water leakage proof at periphery of window from inside and outside both etc., as directed by EIC. NOTE: Including scaffolding, curing etc.