Indian Port Rail And Ropeway Corporation Limited Tender

LIGHTNING PROTECTION SYSTEM , any other small accessoires required to complete job rate considering below BOQ item no extra cost will paid for other accesoires mention in below BOQ item - UTILITY BUILDING / SUECUIRTY CABIN LIGHTINGING PROTCTION TO BE PROIVDED

WHAT EVER SMALL ITEMS REQUIRED TO COMPLETE LIGHTING PROTECTION WORK TO CONISDRE IN BELOW ITEMS

Supply & Installation of 8 / 10 mm dia copper bonded rod cunductor as down conductor in column

Supply & Installation of Re-bar plate 150 x 150 x 10 mm with calmp to connect with 8 mm copper bonded road with internal clamp for in side column ( SS 304 -with 3 holes)

Supply & Installation of Connector for Cross connection for STRIP / ROD (S.S. material) @ terrace

Supply & Installation of Connection Clamp for earth Rod on flat conductor (copper)

Supply & Installation of 8/10 mm AL as Mesh conductor at tarrace. Scope inculding roof / parapet holder for fix of AL rod & expansion joint

Supply & Installation of Air terminal 1000 mm Al. with Support stand (10 KG)

Supply & Installation of Air terminal 4000 mm Al. with Support stand (10 KG)

Supply & Installation of Down conductor clamp for 8/10 mm copper bonded rod

Supply & Installation of Roof conductor holder for 8/10 AL rod

Supply & Installation of G.I. Earth Bus for strip termination with Insulator / Anchor Fastner ( 300 mm x 50 mm x 10 mm)

Supply & Installation of Lightning counter

Supply & Installation OF XLPE ARM CU/AL CABLES (HT 11KV E, & 1.1KV L.T. CABLE)

Supply & Installation of 4C X 150 sq. mm (50mm) (AL.)

Supply & Installation of 4C X 10 sq. mm (25 mm) (Cu)

Supply & Installation of 4C X 150 sq. mm (50mm) (AL.)

Supply & Installation of 4C X 10 sq. mm (25 mm) (Cu)

LIGHT FIXTURE & FAN

Supply & Installation of following sizes of ceiling fan without regulator complete with double ball bearing, copper wound motor, blades, downrod, canopy, capacitor etc.suitable for operation on 230 V 50 Hz Supply & Installation i/c wiring the down rod of standard length up to 30 Cms and with 3 x 1.5 sqmm PVC insulated copper conductor FRLS cable i/c connection, ENERGY EFFICIENT / 5 STAR RATING etc as reqd .

1200mm Sweep BEE 5 STAR RATING

Supply & Installationof 300 sweep 900 rpm heavy duty exhaust fan suitable of operation on single phase, 230V, 50 Hz AC Supply & Installation in the existing opening, including making good the damage, including providing &fixing suitable GI sheet louvers/ shutters i/c conections as required.

MISCELLANEOUS WORKS

CARBON DI-OXIDE TYPE FIRE EXTINGUISHERS : 6.5 Kg. carbon di-oxide type fire extinguishers with necessary clamps and supports for wall mounting.

FOUNTAIN SECTION PILLER IP65

Supply & Installationing of UTP 4 pair CAT 6(A) LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. (FOR DATA / WIFI) PowerCat 6A U/FTP Cable should be specifically designed to support high speed data network applications such as 10-Gigabit Ethernet (10GBASE-T). The cable shall be constructed of 4 screened pairs and a drain wire. This cable shall be minimizing alien crosstalk, provides excellent signal isolation and provides superior electromagnetic interference (EMI) protection Construction: PowerCat 6A U/FTP LSZH Cable; Conductor Size: 23 AWG; Primary Insulation: Foamed Polyethylene; Screen material Laminated: Aluminium; Nominal OD: 7.4 + 0.3 mm; Sheath Type: LSZH; Screen Each pair enclosed in laminated aluminium foil; Drain Wire: tin-coated copper; Pulling Force: 110N maximum; Short term. bend radius: 8 x OD mm; Long Term bend radius: 4 x OD mm; NVP: 75-77%; Operating Temperature Installation: 0˚C to +50˚C; Operating Temperature Operation: -20˚C to +70˚C; Capacitance: 5.6nF/100m; DC Resistance: ≤ 9.38Ω/100m; Propagation Delay: 514 + 36f1/2 nS/100m max @1-500 MHz, Propagation Delay Skew 45 nS/100 max @ 1-500 MHz; Mean Impedance: 100 ± 15Ω; Voltage Rating: 2V dc maximum; Resistance Unbalance: 5% max; Coupling Attenuation: 45 dB min @30-100 MHz; 40-20 Log (f/100) @ 100-500 MHz COMMERCIAL STANDARDS ISO/IEC 11801 amendment 2:2010; TIA/EIA-568-C.2 Category 6A; IEC 61156-5; ETL verified to ANSI/TIA-568-C.2 & ISO/IEC 11801; 2 Connector Permanent Link; FIRE PROPAGATION TESTS UL 1581; VW1, IEC 60332.1; EN0256-2-1; Performance Characters Complies to IEC 60332 P1; Compliant to CPR Fire Class IEC 60754-2, Smoke density IEC 61034-2 OEM Criteria No second Brand or Class B product of any O.E.M’s should be quoted; End to End Structured Cabling Products from Single Brand and Single OEM; The O.E.M should be ISO Certified; OEM should have minimum 10 Years of presence in India. Proof of Documents to be attached. Warranty: 25 years of System Performance and application Assurance warranty ; Site certificate must be issued by OEM; MAF: Bidder Must produce the manufacturer Authorization certificate from the OEM

1 run of cable (From Molex / D-Link /

2 run of cable

3 run of cable

2 run of cable

3 run of cable

Supply & Installation of RJ-45 Information Outlet with Face Plate

Supply & Installation of RJ-45 Information Outlet with Face Plate OUT DOOR TYPE

Supply & Installation of LC-LC SINGLE mode /Multimode 50/125 micron Duplex, LSZH Sheath, OM 4 Patch Cord, 3 Meter Features OS1/2 Singlemode performance; Standard or custom assemblies; Precision ferrule endface geometry; Controlled Fiber protrusion; Factory polished, tested and serialized Technical Requirement;- Cable: 2 Fiber zipcord; Outside Diameter: 2.9mm x 6.0mm; Buffer Diameter: 900μm tight buffer; Strength Member: Aramid Yarn; Min. Bend Radius: 30mm; Cable Sheath Material: LS0H; Cable Sheath Color: Yellow; Cable Grade: FDDI Riser Rated OFNR; Connector ferrule: Zirconia; Retention Strength: 100N; Operating Temperature: -10°C to 60°C; Insertion Loss: 0.30dB; Attenuation: @ 1310nm 0.4dB/km Commercial Standards:- ISO/IEC 1108:2008, ANSI/TIA/EIA 568.C.3, ANSI/TIA/EIA-492, TELECORDIA GR-409, ICEA-596 LS0H Jacket Standard – Reduces toxic / corrosive gasses emitted during combustion.

Supply & Installation of 15U (W 600mm / D 800mm) Close rack 19" Floor Stand : Sr. No. Parameter Specifications for Glass door 1 Basic Frame Multi hollow extrusion Aluminium profile frame 2 Construction Modular Constuction of the rack made of 4 vertical , 4 horizontal & 4 depth extruded aluminum alloy multi hollow profiles bolted and joined together with Links and Corner Block. 2/3 pairs of support channel to equate the load evenly 3 Top & Bottom Cover Bolted to Frame with Cable entry cut outs 4 Front Door Lockable 4mm thick Toughened Glass Door 5 Rear Door Lockable Steel Door with square ventilation 6 Lock for doors Cam Lock 7 19” Mounting Angle 4 No Adjustable. 19” verticals with Punched 9.5mm Squarer Hole and Universal 12.7 mm-15.875 mm- 15.875 mm alternating hole pattern offers greater mounting flexibility, maximizes usable mounting space. 8 Standard Finish "Epoxy polyester Powder coated 60-80 micron thickness" 9 Standard Colour RAL 9005 10 Standard Mounting Caster wheels (2 with Brake & 2 without Brake) and Levellers OR Plinth 11 Static Load Upto 1200 KG. 12 Accessories Power distribution unit, Metal Cable manager, Hardware packet, Monitor Shelf 13 Equipment cooling 2 Fan Mount provision on top cover 14 Corrosion Resistance Salt spray test according to ISO 9227 (NSS test) and IEC EN 60068-2-11 (Ka test) for 168 hours: degree of Rusting Ri1 according to ISO 4628-3, propagation ≤1 mm according to ISO 4628-8. 15 Rack Standards IS 9606-1980, UL 2416, IEC EN 60529, IEC EN 62262, ISO 9001:2008, ISO14001: 2015 16 Degree of Protection IP 20 according to IEC 60529:2013, IK08 according to IEC EN 62262:2002 17 Warranty One year 18 Size Floor stand with single side panels: 24U - 600W x 800D

CORE / DISTRIBUTION / EDGE SWITCHES - All switches should be fully loaded with all accessories like patch cord, SFU, LIL, Splicing & enterprize grade etc.

Supply & Installation OF 8 Port 10/100/1000Mbps PoE FOR OUT DOOR APPLICATION & 4 ports for optional SFP/ SX & SFP+/SR Modules supporting 1G & 10G respectively, layer 2 switch with Stacking cable (Non blocking switch fabric, IPv6 ready), supports IGMPv2/3 & Multicasting (Should have per port power budget of 15.4W, when fully populated)

Supply & Installation OF 16 Port 10/100/1000Mbps PoE FOR OUT DOOR APPLICATION & 4 ports for optional SFP/ SX & SFP+/SR Modules supporting 1G & 10G respectively, layer 2 switch with Stacking cable (Non blocking switch fabric, IPv6 ready), supports IGMPv2/3 & Multicasting (Should have per port power budget of 15.4W, when fully populated)

Supply & Installation of 12 way LIU

INDOOR ACCESS POINTS - Supply & Installation OF WI-FI: 6 AP Dual-band (5 GHz and 2.4 GHz concurrent) Mid-Range 802.11ac (450Mbps), 4 x 4 MIMO, Dual Polarized Wireless Access Point with PoE (802.3af) support/ capability. These AP's should be capable of being used with POE + port OR external power source (Thin & thick AP), with Mounting brackets.

OUTDOOR ACCESS POINTS - Supply & Installation of outdoor WI-FI: 6 AP Dual-band (5 GHz and 2.5 GHz concurrent) PHY Dat Rate up to 3.47Gbps, 4 x 4 MIMO, 4 Spatial Stream, Dual Polarized Wireless Access Point with PoE (802.3af) support/ capability. These AP's should be capable of being used with POE + port OR external power source (Thin & thick AP), with Mounting brackets.

IP Phone Managerial (IP Phone Managerial eqvlt. to Matrix Sparsh VP710) "8058s WW Premium Deskphone Moon Grey, 3,5"" 320x240 Color display, Wide Band Corded Confort Handset, Alphabetic Keyboard, Jack 3,5 mm 4 poles, Integrated 4 lighted key Smart add-on module, USB, 10/100/1000 PC Connectivity POE"

Supply & Installation of Cat 6 Patch Cords, U/UTP, LSZH - 3 Feet, Data Nodes (at Rack Side) The patch cable is made from high quality four pair 24 AWG stranded copper wire. Available in a range of colors and lengths, PowerCat 6 patch cords are preterminated with RJ45 plugs and feature anti-snag slim strain relief slip on boots." Construction: Pre-terminated with WE8W plugs, Slim clear anti-snag slip on boots, Suitable for EIA 568A or 568B wiring, LS0H sheath, RoHS Compliant; Cable Length: 1 meter and 2 meter, However it may change depend on site conditions; Manufacturer: All passive cabling must be from same OEM; Conductor Size: 4 pair 24 AWG stranded copper wire; Bend radius: 4 x O.D.; Nominal OD: 5.9 mm; Operating temperature range: -20°C to 60°C; Sheath Type: LSZH; MIN operating life: 750 insertion cycles; RJ45 plug and boot material: Clear polycarbonate; Contact material: 0.35mm thick copper alloy; Contact plating: Selective gold; RJ45 plug dimensions compliant with: ISO/IEC 60603-7-4 and FCC 47 Part 68; Max voltage: 150 VAC (max); Max current: 1.5A @ 25°C; Commercial Standards: ISO/IEC 11801:2002/AMD 2:2010 Cat 6; TIA-568-C.2 Cat 6; ETL Verified; Fire Propagation Tests: LS0H Sheath: CSA FT1, IEC 60332-1, IEC 61034; OEM Criteria: No second Brand or Class B product of any O.E.M’s should be quoted; End to End Structured Cabling Products from Single Brand and Single OEM; The O.E.M should be ISO Certified; OEM should have minimum 10 Years of presence in India. Proof of Documents to be attached.; Warranty: 25 years of System Performance and application Assurance warranty; Site certificate must be issued by OEM.; MAF: Bidder Must produce the manufacturer Authorization certificate from the OEM ( for telephone )

Supply & Installation of Cat 6A Patch Cords, U/UTP, LSZH - 3 Feet, Data Nodes (at Rack Side) The patch cable is made from high quality four pair 26 AWG stranded copper wire. Available in a range of colours and lengths, PowerCat 6A patch cords are preterminated with RJ45 plugs and feature anti-snag slim strain relief slip on boots Construction: Ø 4 pair 26 AWG stranded copper wire, Ø Pre-terminated with RJ45 plugs, Ø Slim clear anti-snag slip on boots, Ø Suitable for EIA 568A or 568B wiring, Ø LS0H sheath, Ø 10G Performance when installed as a complete PowerCat 6A Shielded System, Ø RoHS Compliant; Conductor Size: 26 AWG stranded copper wire; Screen material: Aluminum/polyester shield with tinned copper drain wire; Bend radius: 8 x O.D.; Nominal OD: 6.5 mm; Operating temperature range: -20°C to 60°C; Sheath Type: LSZH; MIN operating life: 750 insertion cycles; RJ45 plug material: Clear polycarbonate; Boot material: Clear polyvinylchloride; Contact material: 0.35mm thick copper; Contact plating: 1.27um gold; RJ45 plug dimensions compliant with: ISO/IEC 60603-7-4 and FCC 47 Part 68; Max voltage: 150 VAC (max); Max current: 1.5A @ 25°C; Commercial Standards: ISO/IEC 11801 2nd Ed Amd 1 Class EA, TIA-568-C.2 Cat 6A, UL 1863, CSA C22.2; Fire Propagation Tests: LS0H Sheath: CSA FT1, IEC 60332-1, IEC 61034-2; OEM Criteria: No second Brand or Class B product of any O.E.M’s should be quoted; End to End Structured Cabling Products from Single Brand and Single OEM; The O.E.M should be ISO Certified; OEM should have minimum 10 Years of presence in India. Proof of Documents to be attached.; Warranty: "25 years of System Performance and application Assurance warranty ; Site certificate must be issued by OEM.; MAF: Bidder Must produce the manufacturer Authorization certificate from the OEMC: Fiber Back bone for Intrabuilding Connectivity - MM-OM 3/4

Supply & Installation of 12-fiber LC-Style, single mode, 19-inch ,1U Rack mount Patch Panel loaded with LC duplex MM OM4, 12F Pigtail Cartridge with Splice tray. Features 12 Port Configurable Fiber drawers should be 1U rack mount unit for storing and terminating incoming fiber cable. It should be able to configure 6 Pak Plates of fiber system to suit all fiber applications. It should be with management rings within system to accommodate excess fiber cordage behind the trough adapters and maintain fiber bend radius. It should be able to accommodates single mode and multi-mode fibers. Properties Adhesive labeling for port identification, sliding drawer for ease of reconfiguring fibers, Rugged steel construction finished in attractive, Graphite finish to complement all rack mount equipment, Accommodates 2 x 12 fiber Splice Trays; Material Powder coated Cold Rolled Steel; Accommodation 24 Port (Using 6 Pak Plates, see Datasheet); Fiber Termination Direct Termination / Fusion Splice / Mechanical Splice; Dimensions: 45mm H x 485mm W x 255mm D; Weight 5.7Kg; Environmental Standards: RoHS compliant; LC Duplex 12 Fibre SM Adapter Plate Features Adapters should be with a shutter providing a barrier against harmful light emissions and with either precise zirconia ceramic or rugged phosphor bronze alignment sleeves. It should be with Small footprint, RoHS Compliant, Zirconia, phosphor bronze and polymer alignment sleeves, Unique shuttered feature protects from harmful light emissions. Available upon application It should be available in single mode / multimode simple design requires no tooling as the plates install with a simple snap rivet, making installation and changes simple. Provides 12 ports; Plate Material: Black Electroplate or Thermoplastic Blank Adapter Plate Features It should be used whenever any blank spaces are there in LIU; No tools are required; Plates install with a simple snap rivet; Plate Material: Black Electroplate or Thermoplastic; Universal Splice Tray, 24 Fibre with built in Cable Management, 1U Global Enclosure Features The 24 Fibre Splice Tray with Integrated Fibre Management and external fiber management and pivotal splice holding arrangements, allows the installation of 24 optical fibres without the need to fit additional fiber management. The tray is capable of holding up to 24 x 900μm fibres with heat shrink splice protectors. Maintains 30mm bend radius, ideal for 250μm or 900μm fibre; Built-in fibre pick can be used to withdraw individual fibres; Tray is stackable with supplied tray hinge, which also allows for easy access; Material: ABS polymer; Dimensions 168mm W x 124mm D x 13mm H; LC Pigtails Fibre 9μm (OS1/2) SM - 1.5m Characteristics Cable: 900um Buffered; Outside Diameter: 900um; Buffer Diameter: 900um tight buffer; Minimum bend radius: install: 30 mm; Operating Temperature: -10ºC to 60ºC; Retention Strength: 100N; Cable Sheath: LS0H; Connector ferrule: Zirconia; Cable Grade: FDDI Riser Rated OFNR Features Standard or custom assemblies Precision ferrule end face geometry Controlled fibre protrusion; Factory polished, tested and serialized. Fibers compliant to ISO/IEC 11801 Fiber specifications; Standards: IEEE 802.3 10GBase-SR/SW:10Gbps; IEEE 802.3 10GBase-LX4: 10Gbps; Fiber Channel 400-M5-SN-1: 4Gbps; Fiber Channel 1200-M5E-SN1: 10Gbps; Fiber Channel FC-PH: 1Gbps; IEEE 802.3 1000Base-SX/LX: 1Gbps; FDDI: 100Mbps; IEEE 802.3 FOIRL: 10Mbps; IEEE 802.3 10Base-F: 10Mbps; ATM:155 Mbps, 622 Mbps, 1.2 Gbps and 2.4 Gbps; Insertion Loss: 0.35dB max.

Supply & Installation of 24-fiber LC-Style, Single mode , 19-inch ,1U Rack mount Patch Panel loaded with LC duplex MM OM4, 12F Pigtail Cartridge with Splice tray. Features 24 Port Configurable Fiber drawers should be 1U rack mount unit for storing and terminating incoming fiber cable. It should be able to configure 6 Pak Plates of fiber system to suit all fiber applications. It should be with management rings within system to accommodate excess fiber cordage behind the trough adapters and maintain fiber bend radius. It should be able to accommodates single mode and multi-mode fibers. Properties Adhesive labeling for port identification, sliding drawer for ease of reconfiguring fibers, Rugged steel construction finished in attractive, Graphite finish to complement all rack mount equipment, Accommodates 2 x 12 fiber Splice Trays Material: Powder coated Cold Rolled Steel; Accommodation 24 Port (Using 6 Pak Plates, see Datasheet); Fiber Termination Direct Termination / Fusion Splice / Mechanical Splice; Dimensions: 45mm H x 485mm W x 255mm D; Weight: 5.7Kg; Environmental Standards: RoHS compliant; LC Duplex 12 Fibre SM Adapter Plate Features Adapters should be with a shutter providing a barrier against harmful light emissions and with either precise zirconia ceramic or rugged phosphor bronze alignment sleeves. It should be with Small footprint, RoHS Compliant, Zirconia, phosphor bronze and polymer alignment sleeves, Unique shuttered feature protects from harmful light emissions. Available upon application It should be available in single mode / multimode; simple design requires no tooling as the plates install with a simple snap rivet, making installation and changes simple. Provides 12 ports; Plate Material: Black Electroplate or Thermoplastic Blank Adapter Plate Features It should be used whenever any blank spaces are there in LIU; No tools are required; Plates install with a simple snap rivet; Plate Material: Black Electroplate or Thermoplastic; Universal Splice Tray, 24 Fibre with built in Cable Management, 1U Global Enclosure Features The 48 Fibre Splice Tray with Integrated Fibre Management and external fiber management and pivotal splice holding arrangements, allows the installation of 24 optical fibres without the need to fit additional fiber management; The tray is capable of holding up to 24 x 900μm fibres with heat shrink splice protectors; Maintains 30mm bend radius, ideal for 250μm or 900μm fibre; Built-in fibre pick can be used to withdraw individual fibres; Tray is stackable with supplied tray hinge, which also allows for easy access. Material: ABS polymer; Dimensions: 168mm W x 124mm D x 13mm H; LC Pigtails Fibre 9μm (OS1/2) SM - 1.5m Characteristics Cable: 900um Buffered; Outside Diameter: 900um; Buffer Diameter: 900um tight buffer; Minimum bend radius: install: 30 mm; Operating Temperature: -10ºC to 60ºC; Retention Strength: 100N; Cable Sheath: LS0H; Connector ferrule: Zirconia; Cable Grade: FDDI Riser Rated OFNR Features Standard or custom assemblies Precision ferrule end face geometry Controlled fibre protrusion; Factory polished, tested and serialized; Fibers compliant to ISO/IEC 11801 Fiber specifications:- Standards: IEEE 802.3 10GBase-SR/SW:10Gbps; IEEE 802.3 10GBase-LX4: 10Gbps; Fiber Channel 400-M5-SN-1: 4Gbps; Fiber Channel 1200-M5E-SN1: 10Gbps; Fiber Channel FC-PH: 1Gbps; IEEE 802.3 1000Base-SX/LX: 1Gbps; FDDI: 100Mbps; IEEE 802.3 FOIRL: 10Mbps; IEEE 802.3 10Base-F: 10Mbps; ATM:155 Mbps, 622 Mbps, 1.2 Gbps and 2.4 Gbps; Insertion Loss: 0.35dB max.

Fixed Indoor Dome Camera Image Sensor : CMOS or better Resolution : 2 MP (1920 x 1080) FPS at full Resolution : 25 fps Min Illumination : Color: 0.2Lux, BW : 0Lux (IR LED on) Focal Length : 3 mm / 4 mm / 6 mm (Based on Design) WDR : 115 Db True WDR or better (Not Digital) Codec : H.265 / H.264 Streams : Minimum 2 Streams with selectable profiles Day & Night : Yes IR Range : 20 Mtr SD Card : Yes POE : Yes Audio : No Alarm I/O : No Housing : IP66, IK10 Vandal Proof Certifications : BIS, FCC, CE & UL Note : The cameras provided should not have the HiSilicon Chipset / Processor to ensure cybersecurity compliance

Total Amt