Indian Institute Of Management Tender

Providing ,Fabricating & Erection of M.S. 10 mm thick Insert plates (250 mm x 300 mm) with 12 mm Dia. MS round bars on RCC Bed block with all necessary required fillet weld, NUTS,BOLTS etc. with TWO COATS of enamel paint over one coat of primer it as per drawings & details.The rate shall be inclusive of neccessary scaffolding etc. complete. Actual quantity to be measured and paid. (For information - Quantity break up -One building = 400 x 3 buildings = 1200 kgs. for total three buildings) Basic rate of F O R SITE of Mild Steel = Rs.58/- per kgs including trasportion but excluding GST.

Removal of China mosaic, Brick bat coba water proofing exposing the RCC slab to accomodate insert plate of size 250 mm x 300 mm including re doing the same teartment again ( using good quality water proofing compound also) after insallation of Insert plates as per drawings & details.The rate shall be inclusive of neccessary scaffolding etc. complete. Actual quantity to be measured and paid. (For information - Quantity break up -One building = 68 x 3 buildings = 204 nos. for total three buildings)

Providing ,Fabricating & Erection of M.S. 10 mm thick Insert plates (250 mm x 300 mm) and 6 mm junction plates for roofing with all necessary required fillet weld etc. with TWO COATS of enamel paint over one coat of primer it as per drawings & details.The rate shall be inclusive of neccessary scaffolding etc. complete. Actual quantity to be measured and paid. (For information - Quantity break up -One building = 700 x 3 buildings = 2100 kgs. for total three buildings). Basic rate of F O R SITE of Mild Steel = Rs.58/- per kgs including trasportion but excluding GST.

Providing, Fabricating & Erection of HILTI / ITW CHEMICAL Anchor fastners 12 mm Dia x 100 mm for fixing insert plates on existing RCC slab with all necessary required chemicals etc. as per drawings & details. TATA or equivalent as approved by the in charge engineer.The rate shall be inclusive of neccessary scaffolding etc. complete. Actual quantity to be measured and paid. (For information - Quantity break up -One building = 300 x 3 buildings = 900 nos. for total three buildings)

Providing ,Fabricating & Erection of M.S. pipe structure / BOX sections ( RHS 96 x 48 x 4 mm ) for roofing with all necessary required fillet weld etc. with TWO COATS of enamel paint over one coat of primer it as per drawings & details approved by in charge engineer. TATA or equivalent as approved by the in charge engineer. The rate shall be inclusive of necessary scaffolding etc. complete. Actual quantity to be measured and paid. No payment shall be paid for any wastage or theft. (For information - Quantity break up -One building = 8000 x 3 buildings = 24000 kgs for total three buildings). Basic rate of F O R SITE of Mild Steel = Rs.58/- per kgs including trasportion but excluding GST.

Providing & fixing in position 2.00 mm thick POLY CARBONATE/FRP roofing sheet. Shade: clear embossed/ natural white. Shape: Trafford type (corrugated). Single length up to 11.80-meter, overall width 1072 mm, cover width 1015 mm. Screwed down to the purlin with SDST screws coating class-3, HOT DIP, galvanized of size 12 gauge, 14 TPI, 55 mm long. Number of screws shall be minimum 4 per SQM. With washer’s EPDM 19 to 23 mm Diameter as per drawings & details. Overlapping along length shall be about 58 mm. The rate shall be inclusive of necessary scaffolding etc. complete. Actual quantity to be measured and paid. OVERLAPS WILL NOT BE CONSIDERED FOR PAYMENT. The make shall be Option (A) Poly carbonate profile clear embossed sheet PALRAM/ TUFLITE or Equivalent, Option (B) FRP sheet INTEK make or Equivalent make as approved by IIMA. IIMA reserves the right to select option (A) or option (B) or any other roofing product also. (For information - Quantity break up -One building = 670 x 3 buildings = 2,010 SQM for total three buildings). Basic rate F O R SITE of SHEET = Rs. 750/- per SQM INCLUSIVE OF TRANSPORATION BUT EXCLUDING OF GST.

Section 200-For regular faculty houses and other houses UPPER TERRACE LEVEL

Removal of China mosaic, Brick bat coba water proofing exposing the RCC slab to accommodate insert plate of size 250 mm x 300 mm including re-doing the same treatment again ( using good quality water proofing compound also) after installation of Insert plates as per drawings & details. The rate shall be inclusive of necessary scaffolding, etc. complete. Actual quantity to be measured and paid. (For information - Quantity break up -One building = 12 x 30 buildings = 360 nos.)

Providing ,Fabricating & Erection of M.S. 10 mm thick Insert plates (250 mm x 300 mm) and 6 mm junction plates for roofing with all necessary required fillet weld etc. with TWO COATS of enamel paint over one coat of primer as per drawings & details. The rate shall be inclusive of necessary scaffolding etc. complete. Actual quantity to be measured and paid. (For information - Quantity break up -One building = 280 x 30 buildings = 8,400 kgs). Basic rate of F O R SITE of Mild Steel = Rs.58/- per kgs including trasportion but excluding GST.

Providing, Fabricating & Erection of HILTI / ITW / FISCHER Anchor fasteners 12 mm Dia x 100 mm for fixing insert plates on existing RCC slab with all necessary required chemicals etc. as per drawings & details. The rate shall be inclusive of necessary scaffolding etc. complete. Actual quantity to be measured and paid. (For information - Quantity break up -One building = 50 x 30 buildings = 1,500 nos.)

Providing ,Fabricating & Erection of M.S. pipe structure / BOX sections ( RHS 96 x 48 x 4 mm ) for roofing with all necessary required fillet weld etc. with TWO OR MORE COATS of enamel paint over one coat of primer as per drawings & details. TATA or ASIAN TUBE as approved by the Engineer. The rate shall be inclusive of necessary scaffolding etc. complete. Actual quantity to be measured and paid. WASTAGE WILL NOT BE CONSIDERED FOR PAYMENT. (For information - Quantity break up -One building = 1500 x 30 buildings = 45,000 kgs). Basic rate of F O R SITE of Mild Steel = Rs.58/- per kgs including trasportion but excluding GST.

Providing & fixing in position 2.00 mm thick POLY CARBONATE/FRP roofing sheet. Shade: clear embossed/ natural white. Shape: Trafford type (corrugated). Single length up to 11.80-meter, overall width 1072 mm, cover width 1015 mm. Screwed down to the purlin with SDST screws coating class-3, HOT DIP, galvanized of size 12 gauge, 14 TPI, 55 mm long. Number of screws shall be minimum 4 per SQM. With washer’s EPDM 19 to 23 mm Diameter as per drawings & details. Overlapping along length shall be about 58 mm. The rate shall be inclusive of necessary scaffolding etc. complete. Actual quantity to be measured and paid. OVERLAPS WILL NOT BE CONSIDERED FOR PAYMENT. The make shall be Option (A) Poly carbonate profile clear embossed sheet PALRAM/ TUFLITE or Equivalent, Option (B) FRP sheet INTEK make or Equivalent make as approved by IIMA. IIMA reserves the right to select option (A) or option (B) or any other roofing product also. (For information - Quantity break up -One building = 120 x 30 buildings = 3,600 SQM) Basic rate F O R SITE of SHEET = Rs. 750/- per SQM INCLUSIVE OF TRANSPORATION BUT EXCLUDING OF GST.

Section 300-For regular faculty houses and other houses LOWER TERRACE LEVEL

Removal of China mosaic, Brick bat coba water proofing to exposing the RCC slab to accommodate insert plate of size 250 mm x 300 mm including re-doing the same treatment again ( using good quality water proofing compound also and testing) after installation of Insert plates as per suggested by in charge Engineer. The rate shall be inclusive of necessary scaffolding, etc. complete. Actual quantity to be measured and paid. (For information - Quantity break up -One building = 4 x 30 buildings = 120 nos.)

Providing ,Fabricating & Erection of M.S. 10 mm thick Insert plates (250 mm x 300 mm) and FOUR SIDE 6 mm junction plates for roofing with all necessary required hardware and fillet weld etc. with TWO OR MORE COATS of enamel paint over one coat of primer as per suggested by in cgarge Engineer. The rate shall be inclusive of necessary scaffolding etc. complete. Actual quantity to be measured and paid. (For information - Quantity break up -One building = 8 x 30 buildings = 240 kgs.). Basic rate of F O R SITE of Mild Steel = Rs.58/- per kgs including trasportion but excluding GST.

Providing, Fabricating & Erection of HILTI / ITW / FISCHER Anchor fasteners 12 mm Dia x 100 mm for fixing insert plates on existing RCC slab/ Brick wall with all necessary required chemicals etc. as per suggested by in charge Engineer. The rate shall be inclusive of necessary scaffolding etc. complete. Actual quantity to be measured and paid. (For information - Quantity break up -One building = 32 x 30 buildings = 960 nos.)

Providing ,Fabricating & Erection of M.S. pipe structure / BOX sections ( RHS 96 x 48 x 4 mm ) for roofing with all necessary required hardware and fillet weld etc. with TWO OR MORE COATS of enamel paint over one coat of primer as per suggested by in charge Engineer. TATA or ASIAN TUBE as approved by the in charge Engineer. The rate shall be inclusive of necessary scaffolding etc. complete. Actual quantity to be measured and paid. WESTAGE WILL NOT BE CONSIDERED FOR PAYMENT. (For information - Quantity break up -One building = 900 x 30 buildings = 27,000 KGS). Basic rate of F O R SITE of Mild Steel = Rs.58/- per kgs including trasportion but excluding GST.

Providing & fixing STAIGHT in position 2.00 mm thick POLY CARBONATE/FRP roofing sheet. Shade: clear embossed/ natural white. Shape: Trafford type (corrugated). Single length up to 11.80-meter, overall width 1072 mm, cover width 1015 mm. Screwed down to the purlin with SDST screws coating class-3, HOT DIP, galvanized of size 12 gauge, 14 TPI, 55 mm long. Number of screws shall be minimum 4 per SQM. With washer’s EPDM 19 to 23 mm Diameter as per drawings & details. Overlapping along length shall be about 58 mm. The rate shall be inclusive of necessary scaffolding etc. complete. Actual quantity to be measured and paid. OVERLAPS WILL NOT BE CONSIDERED FOR PAYMENT. The make shall be Option (A) Poly carbonate profile clear embossed sheet PALRAM/ TUFLITE or Equivalent, Option (B) FRP sheet INTEK make or Equivalent make as approved by IIMA. IIMA reserves the right to select option (A) or option (B) or any other roofing product also. (For information - Quantity break up -One building = 80 x 30 buildings = 2400 SQM) Basic rate F O R SITE of SHEET = Rs. 750/- per SQM INCLUSIVE OF TRANSPORATION BUT EXCLUDING OF GST.

Supply & Installation of Two part Apron flashing made from color coated galvalume 0.50mm TCT High tensile steel with min 550 MPa yield strength & metallic hot-dipped coated with AZ150 having girth of 300 mm for each piece. The part -1 of Apron flashing should be fixed in position with help of Dash fastener of size 50x 6 mm pin type & 50mm overlap of the flashing should be treated with silicon sealant to prevent water leakage. Part – 2 flashing should be fixed to cover the head of the dash fastener already fixed to the wall & the bent lip of the flashing should be inserted into the gap (zari – 2 mm x 32mm deep) made with grinder in the wall. (For information - Quantity break up- One building= 10 X 30 buildings = 300 RMT) Detailed drawing with specification please refer Annexure C