Gujarat State Aviation Infrastructure Company Limited Tender

Supply of 25 W nominal capacity LED integral street light fitting outdoor type having pressure die cast alluminium housing with epoxy powder coated finish, ….as per technical specification.

ITC of Light fitting on street light pole bracket including wiring with 3C X 1.5sqmm flexible FR PVC copper cable including connection, providing & fixing of 6-32A SP MCB C series …. as required.

Supply of 3.5 x 95 sqmm, XLPE insulated, PVC sheathed aluminimum multi stranded conductor armoured power cable of 1.1 KV grade confiring to IS 7908 (part I) with upto date amendements etc as required.

Supply of 3.5 x 50 sqmm, XLPE insulated, PVC sheathed aluminimum multi stranded conductor armoured power cable of 1.1 KV grade confiring to IS 7908 (part I) with upto date amendements etc as required.

Supply of 4C x 25 sqmm, XLPE insulated, PVC sheathed aluminimum multi stranded conductor armoured power cable of 1.1 KV grade confiring to IS 7908 (part I) with upto date amendements etc as required.

Suppling and making end termination with brass compression gland and copper/aluminium lugs according to the cable for 4 x 25/16 sqmm (32/28 mm) aluminimum cable. size for PVC/ XLPE insulated and PVC sheathed armoured copper/ aluminium conductor cable of 1.1 KV grade as required.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL/HDPE pipe as requried. Upto 120 sq.mm

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories ... required. 63 mm dia (OD-63 mm & ID-51 mm nominal)

Execution of HDD(horizontal direction drilling ) inluding provision of HDPE 100mm pipe in the drilled hole along with necessary excavation (using machine )at a depth of around 2 mtr to cross the bitumen/ concrete area road/taxiway/runway etc complete as required.

Supplying and making straight through joint with heat shrinkable kit including ferrules and other jointing materials for 4 x 25/16 sq. mm size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

Pole numbering with reflective coloured 3M or equivalent sheets etc as required as per site conditions.

Providing and fixing of advance technology earth electrode earthing system fabricated from hot deep galvanized pipes (pipe in pipe technology) . & conforming to (IS:3043 : 1987) duly CPRI/ERDA approved all as required & as specified for Size : - Length of electrode = 2.5 Mtr

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

Excavation of the cable trenches in hard rock not exceeding 1.5 metres in width, and lift upto 1.5 metres, including getting out the excavated soil and disposal of excavated soil as directed within a lead of 50 metres.

Supply, installation, testing and commissioning of dust, damp and vermin proof cubicle free floor, outdoor type, double door panel , TPN Aluminium bus bars of high conductivity, DMC/SMC bus bar supports, following switch gears INCOMER i) 160 Amps. 4P , MCCB '36KA, (Ics = Icu= 36KA) with thermal magnetic release having O/L & S/C protection equiped with extendable rotary Handle and Spreader Terminals - 1 Set ON?OFF indication lamps (LED type) with 2 Amp control MCBs. - 1 Set (three numbers) ii) 3 Nos. Phase indication LED lamps with 2Amp MCB, 'ON/OFF' indicating light with 2A MCB. iii) Multifunction meter, class 0.5 with LCD Display shown V,A,Hz & PF - 1 Nos. iv) Current Transformer CT 100/5A , CL-1 , 5 VA - 3 Nos. BUS-BAR : TPN aluminium main bus bars of minimum of 100 Amp capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bars supports at required intervals complete. OUTGOING 32 Amps. 4P, MCCB '36KA, (Ics = Icu= 36KA) with thermal magnetic release having O/L & S/C protection equiped extendable rotary Handle and Spreader Terminals - 03 Set ON?OFF indication lamps (LED type) with 2 Amp control MCBs. - 3 Set Astro timer - 1 No. Contactor MNX50 (or equivalent) - 01 No.

SITC of Feeder panel (Size 300mm X 600mm X 170mm) with following :- 1) 32A 4P MCB as Incommer - 01 No 2) Digital time switch - 1no (Austrominical Timer) 3) Contactor MCX(3Pole) - 1 sets 4) Input and output terminal block. 5)16A DP MCBs as outgoung - 01 Nos. Power and Control wiring between incomming MCB, time switch, contactor and output terminals complete as required for operation of street light circuits.

Design, supply of 16mtr flood light high mast fabricated in two telescopic sections(MS), hot Dip galvanised finish totally on externally and internally etc (with base plate welded to the bottom sections ) and suitable for wind velocity as per IS 875 part 3 (latest) and holdings suitable for installation of flood lighting luminaries complete as per tender specification.

Erection of high mast of size upto 18.0 meter with following works:- (i) Designing the best suitable lighting scheme with the help of software Agi32 or better. (ii) Making foundation at location as suggested in designing scheme(point no.etc.

Supply and Installation of 300 watt wide beam (minimum 60 degree) LED Flood Light fixture with housing material - Aluminum Alloy,Optic material - Polycarbonate with integrated electronic power supply unit, fixture should have minimum net efficacy at System level (Not Chip Level) =120lumens/watt & minimum luminous flux of 9600 lumen, Life of fixture 50000hrs @ L70 Lumen.

Supply, installation, testing and commissioning of medium intensity LED type aviation obstruction light luminair with lamp, fixtures, mounting clamp, nut bolt etc. complete as required. (Make-intertek or equivalent )type test certificate to be provided before supply, all test reports confirming to photometry 4C requirement,frangibility test report as per ICAO annex 14 and DGCA CAR etc)

Design, fabrication, supply, installation, testing and commissioning of double door, weather proof, Incoming: (i) 63A, 50KA (Ics=100%Icu) thermal magnetic release type TPN MCCB having over load and short ckt. protection, adjustable overload settings :- 0.8 - 1.0 x In, adjustable short-circuit settings :- 6 - 10 x In. along with suitable size Spreader terminals, rotary handle. - 1 No. (ii) 63 amps 3 pole contactor with auto manual selector switch for remote operation. - 1 No. (iii) 3- Phase, Digital VAF-PF meter with RS485 CL-0.5 including protection fuses/MCBs and 3 Nos of class 1.0,10 VA CTs- 1 No. (iv) LED Type R-Y-B indication lamps- 1 set. (v) LED Type R-G-W indication lamp for on/off/Trip indication - 1 Set. Busbar 200 Amps TP& N high conducting aluminium bus bars- 1 Set. Outgoing: (i) 40A, 10KA, C curve TPN MCB- 2 Nos. (Each in Seprate compartment) (ii) 32A, 10KA, C curve DP MCB- 3 Nos.(All 3 Nos. MCBs should be bypassed from contactor and in one compartment) (iii) 30A, 12Way bakelite SHT type Connector for copper conductor control cable.- 1 Set (In separate compartment) (Feeder Pillar should be PTTA type only)