Border Security Force Tender

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 A switch

3 pin 5/6 A socket outlet

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

6 way, Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Single pole and neutral

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

Laying of one following size PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of Aluminum armoured cable direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering.

Upto 35 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.

Upto 35 sq. mm

Supplying and embedding following dia G.I. pipe (medium class) in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape complete as required.

32 mm Dia

Add GST @ 18% (MF=1.035) as per Enhancement factor @ 0.035 on DSR 2022 items

Supplying, Installation, testing and commissioning of 10W, 2 FEET LED LINEAR BATTEN TYPE LIGHT FIXTURE 2 feet Wall/ ceiling batten luminaire having width of 23mm & height of 37mm. The housing shall made of Extruded polycarbonate. The diffuser should be made of Polycarbonate. The luminaire shall have minimum system efficacy of 100lm/w & shall deliver minimum system lumens of 1000lm. The LED used shall be with Lifetime: up to 30,000 h, CCT: 4000K and CRI ≥80. The luminaire should be BIS registered electronic driver with PF≥0.90, THD≤10%, Minimum Internal Surge Protection 2KV, operating Voltage Range of 150V - 270 V, 50Hz Beam angle 150 °. Theluminaire shall be IP-20 rated. suitable for mirror light pre-wired, compact LED fitting of all types, complete with all accessories etc, directly on ceiling/ wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. Make - C&S/Havells/Philips /Wipro /Crompton/Bajaj etc.

Supplying, Installation of 230 mm sweep Exhaust fan, Ventilation DB Four blades, 45 Watts, RPM: 1400, Air Delivery: 860CMPH Rated frequency : 50 Hz, Noise level: 44dB, Double ball bearing for long life Aerodynamically balanced blades for smooth operations, Powerful 100 percent copper motor for high air suction, Boasting a premium metallic finish, performance Warranty: 2 years in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Make- Standard/ Crompton/ Havells/ Bajaj/ Polar/ Orient/ Usha etc

Supplying and fixing aluminium/GI sheet louvers, Shutters complete with frame for exhaust fan of 230 mm sweep etc. as required.

Supplying and installation, Testing, Commissioning of 12W LED square type SURFACE MOUNTED DOWN LIGHT FIXTURE Surface mounted square LED down lighters having approx. dia of 200mm. The housing shall made of ABS plastic with PC diffuser in opal finish. The luminaire shall have minimum system efficacy of 70lm/w & shall deliver minimum system lumens of 96lm. The LED used shall be with life of 50000hrs, CCT: 4000K and CRI ≥70. The luminaire shall use BIS registered electronic driver with PF ≥0.80, THD≤10%, Minimum Internal Surge Protection 2KV, operating Voltage Range of 150V - 270 V, 50Hz. The luminaire shall be IP-65 rated direct on ceiling of all sizes and shapes containing upto two LED lamps per fitting, complete with all accessories including connections etc. as required. Make- Crompton/ Wipro/ Philips/ Bajaj/ Havells etc.

Supplying and installation, Testing, Commissioning of 10W LED LINEAR BULKHEAD TYPE LIGHT FIXTURE Wall mounted bukhead light fixture made of pressure die-cast aluminium housing for better thermal efficiency with high efficiency long life LED module, Electronic ballast with THD 20% & PF0.95, The luminaire shall have minimum system efficacy of 100lm/w, The LED used shall be with life of 50000hrs@L70, CCT: 4000K and CRI ≥80. The luminaire should be BIS registered electronic driver with PF ≥0.90, THD≤10%, IP66 rating, connector for power cable connection, Suitable for wall or ceiling through mounting hole, the light fixture to be supplied with all necessary accessories, directly on wall of all sizes and shapes containing upto two LED lamps per fitting, complete with all accessories including connections etc.  as required. Make- Crompton/ Wipro/ Philips/ Bajaj/ Havells etc.

Supplying, Installation, testing and commissioning of 900 mm ceiling fan, 42watt, High speed-420RPM, Air Delivery-140CUMPM, suitable for 230Volt 50Hz 1 phase AC, copper winding, Anti rust, Brown/white 2 year warranty including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required. Make- Standard/ Crompton/ Havells/ Bajaj/ Polar/ Orient/ Usha etc

Providing and fixing of 30 watt LED flood light made of PDC aluminium housing, toughened glass, lens, with IP 66 Protection directly on wall of all sizes and shapes containing upto two LED lamps per fitting System Efficacy not less than 120 lm/W, Total harmonic distortion (THD) ≤10%, Power Factor 0.95, Color rendering index (CRI) ≥70, Colour Temp. (CCT) 5700 K, suitable for 230 V, 50 Hz,1-¢ AC supply, luminaire Light output shall not be less than 90 percent of the rated Luminous Flux -4725 lm, Features- Delivers excellent illumination, Long life & photobiologically safe LEDs, No harmful UV & IR radiations, Environment friendly as it does not contain Mercury, Instant light with low running temperatures, Operating voltage range: 140 V - 270 V, Operating temperature: -10 °C to + 50 °C, Average life L70B50: 50000 hours, BIS registered Electronic driver- Powered by integral, Isolated LED electronic driver (SMPS based constant current supply) with lower THD, Output Open / Short Circuit protection, Phase to Phase protection (Operation at 440 V AC), Over Voltage protection, Surge Voltage protection upto 4 kV & other safety test as per IS 15885 Part-2/ Sec 13, Optics- High efficiency polycarbonate UV stablized cover (For detailed photometric data, please refer LM79 report & IES file), Housing & Finish- Pressure die-cast aluminium alloy for housing (heat sink) for effective thermal management, sturdiness, excellent corrosion resistant, lens embedded PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07, pole mounting with bracket arm OD 43 mm, Recommended mounting height with suitable inground reinforcement is 6-9 m, As per IS 16107 Part 2/sec1 and 16103 Part 2, cl no. 7, and clause 8.1 respectively etc, as required Make- Crompton/ Wipro/ Philips/ Bajaj/ Havells/ Helonix etc.