Border Security Force Tender

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. Upto 35 sqmm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. ii) Above 35 sq. mm and upto 95 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Upto 35 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Above 35 sq. mm and upto 95 sq. mm

Supplying and making end termination with brass compression gland and aluminium lugs for 3.5 X 50 sq. mm (35 mm) size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required

Supplying and making end termination with brass compression gland and aluminium lugs for 3.5 X 25 sq. mm (28 mm) size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required

Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. Above 6.5 metre and upto 8.0 metre

Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required 100 mm dia

Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required.

Supplying and laying of 90 mm dia (OD-90 mm & ID-76 mm nominal) size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required

Add multiplying correction factor as per memorandam No. 158/SE/GST/2024/02-E and GSTenhncement @ 18 % from 12 % (Combine MF- 1.035 For DSR items 01 No. to 14 No. only

Installation testing and commissioning 45 watt LED street light in existing 7 Mtr hight ocogonal pole and making connection etc as per site requirement

Providing and fixing of 4 Pole 25 Sq mm cable connector on existing street light pole including connection of cable etc as per requirement at site

Installation testing and commissioning Street light control panel on the existing feeder pillar and connection as per requirement at site

Providing and installation of main feeder pillar (1500mm X 900mm X 300mm) out door double door type weather proof feeder pillar made out of 14 SWG CRCA sheet powder coated seven time processed and manufactured from CPRI approved fabricator of suitale size to accommondate following mounting stand with 50mm X 50mm X 6mm thick angle iron, legs 80 Cms long and 1.6mm thick MS sheet, 200A TP&N aluminium busbar/ Copper connction wire with heat shrinkable coloured sleeves and including DMC / S6C bus bar supports at required intervals for complete cross section, complete with detachable cable gland plates made of 2 mm thick CRCA sheet, earthing studs, separators, supports and insulators. The feeder pillar should be provided with suitable size terminal blocks for incoming & outgoing cables. From MCCB to terminal blocks connection will be done with solid aluminium bus bar / conductor. Incoming / outgoing cables will be terminated in terminal blocks. Including pre paint treatment, phosphating and powder coating by approved Siemens grey paint, suitable for operation on 415 volt, 50 Hz, 3 phase, 4 wire A. C. supply system complete including providing and fixing the following mountings, switchgears and accessories therein, etc as required. The feeder pillar shall be supplied with suitable floor mount stand of 80 Cms x 6 mm flate iron frame including plastering of Cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size )complete as required as per specifications (A) The feeder pillar shall be supplied with suitable floor mount of 80cm x 6 mm flate iron frame including including plastering of Cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size )complete as required as per specifications (B) Fabrication of Feeder pillar size 1500mm x 900mm x 300mm FP made of 2 mm thick MS sheet i/c welding, painting, locking arrangement. (a) 125A 35KA, 4 pole MCCB - 1 Nos (already taken Abst Sr no. 02) (b) Three phase Digital Voltmeter (0-500V) - 01 No (c) Three phase Digital Ammeter with CT (0-125A) (d) LED Phase indicating lamp -03 Nos (e) 40 Amp 26kA TP MCCB - 3 Nos (f) 32 Amp 26kA DP MCCB - 1 Nos (g) 1 No. M.V danger notice plate of 200 mm X 150 mm