Airports Authority Of India Tender

SITC of Layer2, 24 port network switch with 4 port SFP( Fiber Port), 2 SFP module 10G, 2 LC LC single mode OFC patch chord of 1.5m each, interconnection of switches with OFC patch chord in the provided rack etc complete all as required and as specified.

Supply and fixing of wall mounted 19 U Equipment rack with 1 no of 48 Port LIU & 03 nos. UTP CAT-6 Patch/Jack panel including termination of UTP CAT 6 cables, splicing of fiber cables, 14 no of cable manager, 50 nos of Cat 6 UTP patch chord of 0.5mtr etc complete all as required.

Supply and fixing of wall mounted 9 U Equipment rack with 1 no of 48 Port LIU panel & 03 nos. UTP CAT-6 Patch/Jack panel including termination of UTP CAT 6 cables, splicing of fiber cables 6 no of cable manager, etc complete all as required.

Supply and Laying of 6 core SM fibre armoured Optical Fiber Cable in existing surface / Raceway / Cable tray / Over false ceiling as per site requirement complete all as required.

SITC of UTP CAT 6 I/O Box and 1.5 mtr Cat 6A UTP patch chord including CAT 6 cable termination etc complete as required.

SITC of UTP CAT 6 I/O Box and 2 mtr Cat 6A UTP patch chord including CAT 6 cable termination etc complete as required.

SITC of UTP CAT 6 I/O Box and 3 mtr Cat 6A UTP patch chord including CAT 6 cable termination etc complete as required.

SH-II Associated Signange Works

Fabrication , supply,installation ,testing and commissioning of pole mounted illuminated openable glow sign board having size 1500mm (W) X 600mm (H)X100mm(D) with following Sign frame - Aluminium extrusion 100 mm wide, 1.5 mm thick openable on one side for maintenance,powdercoated, colour RAL 9006 Sign face - White translucent 040 acrylic, 5mm thick. Matt Laminated printed graphic. Graphics - Plotter cut vinyl Blockout Pantone Black 6C/Yellow C, vinyl for text Pantone Yellow C/Black 6C as per graphics, pasted over acrylic with white diffuser film on inside face. FIDS Housing- suitable size housing to house 43 inch monitor digital display for FIDS, mounted internally, with required brackets , front side open for display and back side covered with back sheet Sign structure - All structural members in 100x25mm Aluminium Hollow box 1.5 mm thick section brush finish, base plate embedded below the floor finish and provided with a floor trim ring. All hardware used for fixing of sign shall be Stainless steel Back sheet - 1.5mm aluminium sheet Lighting : All internal illumination shall be using high Power LED Strip Lights with electronic controllers, having even spread and overlaps to avoid banding and dark spots Note : 1) complete system should have the arrangment to be mounted on 100X100mm SS square pipe 2) Supply of monitor/screen is not included in the scope of work only housing and mounting provision for the monitor is to be made in the frame of the said signage as specified 3) mounting provision of the complete signage is to be made on the existing ground mounted pole

Supply of stainless steel (SS) SS-304 grade square pole of size 100mmx 100 mm of 3mm thick with height of 12 ft along with the SS base plate of 8mm thick having size 200mm x 200mm duly covered with appropriate size and thickness of SS cover for non visibility of anchor fastner as approved by AAI suitable for the mounting of frame structure housing of size 1500mm (W) X 600mm (H)X100mm(D) made of Aluminium extrusion with 43 inch LED display monitor, signage etc complete as required. Note: - i)The given Height of 100X100 mm pole is tentative & actual height of pole shall be such that the top level of the new signage after installation should match the top of the existing cieling suspended signage however the top of the existing signage is 3.56mtr and bottom is 2.9mtr from existing granite flooring ii) there should be no joint in pole.

Installation of already provided/supplied 100X100 mm SS pole suitable to mount the frame structure housing of size 1500mm (W) X 600mm (H)X100mm(D) made of Aluminium extrusion with 43 inch LED display monitor, signage by grouting the said pole on the granite floor with suitable size of anchor fastener with proper covering of anchored fastener by provided SS cover plate, finishing the same etc complete all as required and as specified . Note Please refer attached photos

SH-III Associated Electrical Works

Supplying of XLPE insulated, PVC sheathed 1.1 KV grade aluminium conductor armoured power cable as per IS : 7098 as amended upto date of following sizes 4 X 16 sq.mm

Supply and installing of following size of Hot dip galvanized floor raceway & junction box with openable cover and having 10 nos of knock out holes on both the sides of the race way each of 25mm dia with coupler plate, electro-galvanized Nut, bolt, flexible conduit gland for floor installation including placing in position and cleaning from inside,for computer, power & telephone / data cabling etc complete all as required Note:- 1) The laying of the raceway may be in single,double or tripple tier as per the site requirement,accordingly all hardware material such as support,clamp,anchor fastner,nut,bolts etc for fixing the raceway as per the site requirement are incuded in scope of work of this item 2) The mentioned knock out holes are tentative however actual nos of wholes will be as per the site requirement 3) the cutting or making whole in the side wall of the raceway to connect the lower size raceway or flexible ms conduit is included in scope of work of this item

300x75x2.5mm with cover

100x75x2mm with cover

50x50x2mm with cover

300X300 Junction Box with cover

100X100 Junction Box with cover

50X50 junction Box with cover

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade, not exceeding 35 sq.mm. on surface as required as per CPWD specification

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade, of size not exceeding 35 sq.mm. in the existing RCC/ HUME/ STONEWARE/ METAL pipe as required as per CPWD specification

Supplying and fixing 25 mm dia Galvanized steel flexible pipe with PVC coating along with all ancillaries and accessories like coupler etc. as required.

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed steel/ PVC conduit as required

Supplying and drawing of 3 x 4 sq. mm sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit/race way etc complete all as required as per CPWD specification.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required as per CPWD specification.

Supplying and fixing TPN double door MCB DB: Supplying and fixing of following way, horizontal type three pole and neutral, sheet steel, double door MCB Distribution Board, IP 54 Protection, IK 09,Spill proof, 415 volts, on surface/recess, complete with copper busbar, Isolated neutral busbar, earth bar, din bar, detachable gland plate, interconnections, blanking plates, phosphatized and powder painted including earthing etc. as required as per CPWD specification . (But without MCB/ RCCB/isolator).

12 way ( 8 +6+ 36), Double door, Per phase isolation type

S/F 63A, 10kA, 4P RCCBO: Supplying and fixing of 63A, FP, 415V, Rated Conditional Short-Circuit Current 10kA, RCCB with 100 mA leakage current in the existing RCCB DB complete with connections, testing and commissioning etc. as required as per CPWD specification.

S/F 25A, 10kA, DP RCCBO: Supplying and fixing of 25A, DP, 230V, Rated Conditional Short-Circuit Current 10kA, RCCB with 100 mA leakage current in the existing RCCB DB complete with connections, testing and commissioning etc. as required as per CPWD specification.

Supplying and fixing Single pole 6 Amps to 32 Amps rating, 240 volts,10 kA, 'C' curve, miniature circuit breaker suitable for inductive load in the existing MCB DB complete with connections, testing and commissioning etc. as required as per CPWD specification .

Supplying and making end termination with brass compression gland and Al. lugs for following sizes of PVC conductor cables of 1.1KV grade as required as per CPWD specification.

4 X 16 sq.mm