Water Resources Department Tender

Providing & fixing vitrified antiskid tiles (320x320) and 10mm thick tiles in floor, treads of steps, landing on 25mm thick bed of cement mortar 1:3 and jointed with cement slurry complete.

Removing white or colour wash by scrapping sand papering and preparing surface smooth including necessary repairs to scratches etc complete.

Providing and applying white cement based putty of average thickness 1.00mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Painting ( one or more coats) with synthetic enamel paint of approved brand and manufacture in all shades on old work to give an even shade.

Painting one or more coats of acrylic exterior oaint of approved brand and manufacture ( Such as Dulex/ Asian Paints/ Sherwin Willians) on old work including cleanibg the surface with water etc. complete.

Shifting files, cupboards, tables, chairs and other materials and placing it back in proper condition.

Providing and fixing 10 loitres pvc. Automatic flushing cistern with fittings.

Providing and fixing brass bib cock (heavy) of approved quality b. 20 mm nominal bore

Providing and fixing ASTm UPVC pipe, conforming to ASTm 2467 with ISO 14001, including all UPVC plan & brass threaded fittingsm including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC slovent cement and testing of joints complete as per direction of Engineer, internal work-Exposed. 1. SCH-40 (blue)/(white) a. 20mm outer dia.

Providing and fixing ASTm UPVC pipe, conforming to ASTm 2467 with ISO 14001, including all UPVC plan & brass threaded fittingsm including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC slovent cement and testing of joints complete as per direction of Engineer, internal work-Exposed. 1. SCH-40 (blue)/(white) c. 32mm outer dia.

Painting one or more coats with superior quality ready mixed paint of wood work of approved brand & manufacture in all shades on old work to give an even shade.

Painting one or more coats with superior quality ready mixed paint of steel work of approved brand & manufacture in all shades on old work to give an even shade.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) (Square Hollow Section (SHS) IS4923/ Rectangular Hollow Section (RHS) IS4923/ Circular Hollow Section (CHS) IS1161 closed Structural Steel of (SAIL, TATA. VIZAG, JSW, APOLLO Steel Ltd.) make (min Yeild Stress 310m mpa) trusses etc, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.

Providing and fixing colour coated galuvulium roofing sheets of 0.5mm thickness including all the accessories (TATA make) but excluding the cost of purlins, rafters, trusses, flashings etc. complete as per the directions of the Engineer in charge.

Add or providing & fixing flashings (Corners, Ridges, Valleys, Gable end & TrimS) (Girth upto 610mm) including all the accessories complete as per the directins of the Engineer in charge

Repairs to plaster in patches of 2.5 sqm and under including cutting the patch in propoer shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50m lead. With Cement mortar 1:4 (1 Cement : 4 Fine Sand)

Single Colour Foam Core FRP (Fibre Reinforced Olymer) Door Shutter manufacture, Supply and Installation (including accessories as mentioned below) of EPEE or equivalent Goan make FRP ( Fiber Reinforced Polymer) door shutter of specified thickness as per options below by using tray system with seasoned hard wood, moisture less than 17%, wood styles for Top Rail and lock rails. FRP ( Fibre REinforced Polymer) laminate made up of 450 gramS per Sq.mts (gsm) chop strand matt and unsaturated polyster resion with viscosity range of 400/450 centipoises per second (cps). The core of shutter will be filled as specified (Expanded Polystyrene Foam/Polyurethane Foam (EPS/PU) Foam). The shutter to be of single colour & water proof as well as mild acid/ alkali resistant manufactured using RV/ TIFAC (RV Rngineering College, Bangalore & Tenchnology Information Forecasting & Assessment (Council) Technology in line with IS 13034 1990 test Standard in an ISo 9001-2015 certified factory. Accessories i) S.S. Hinges 4"-3 Nos ii) S.S. Latch-1No iii) Tower Bolt 5"-2Nos iv) Handle 5"-2 Nos Shutter Thickness : a) 30mm