Village Panchayat Tender

Removing dry or oil bound distemper by scrapping sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Applying one coat of distemper primer of approved brand and manufacture on wall surface

Distempering (one/more coat) with oil bound washable distemper of approved brand and manufacture and of required shade on old work to give an even shade

Removing white or colour wash by scrapping, sand papering and preparing surface smooth including necessary repairs to scratches etc. complete

Applying one coat of cement primer of approved brand and maufacture on wall surface

Painting three or more coats with acrylilic exterior paint of approved brand and manufacture (such as dulex/Asian paints/ sherwin willians) including applying one coat of cement primer and one coat of surface treatment etc.

Dismantling asbestos sheet roofing including ridges, hips valley and gutters and stacking the material within 50 meters lead

Providing asbestos cement sheets roofings fixed with galvanized iron j or I hooks, bolts & nuts 8mm dia G.I plain and bitumen washer complete excluding the cost of purlines rafters, and trusses

Corrugated sheets 6mm thick

Providing and fixing ridges & hips in asbestos cement sheets roofing with G.I. j or I hooks, bolts and nuts 8mm dia G.I plain and bitumen washers complete

One piece plain angular ridges

Providing and fixing tiled false ceiling of approved materials of size 595x595 mm in true horizontal level, suspende on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams/ sqm.both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm centre to center and cross "T" of size 24/15x25 mm made of 0.30 mm thick (minimum) sheet 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 X 37 X 25/15 X 1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised

GI Metal Ceiling Lay in plain Tegular / Bevelled edge Global white color tiles of size 595x595 mm, and 0.4-0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polester powder coated of thickness 60 microns (minimum), including factory painted after bending

Dismantling the tile work in floors and roofs laid in cement including stacking of materials within 50 meters lead for thickness of tiles 10mm to 25 mm

Providing and laying vitrified floor tiles in different sizes of Johnson, Somany, Kajaria (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 of approved make in colours and shades as specified laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigment etc., complete

600x600 mm light shades